← The Saudi aviation reference, in one place.
FAA Order JO 7110.65W - Air Traffic Control
Reproduced for study. Always verify against the official GACAR at gaca.gov.sa.
Distribution: ZAT-710, ZAT- 464 Initiated By: AJV-0
Vice President, System Operations Services
This order prescribes air traffi c control procedures and phraseology for use by personnel providing
air traffic control services. Controllers are required to be familiar with the provisions of this order that
pertain to their opera tional responsibilities and to exercise their best j udgment if they encounter
situations not covered by it.
Effective Date:
December 10, 2015Air Traffic Organization Policy
SUBJ: Air Traffic Control ORDER
JO 7110.65W
DIRECTIVE NO. RECORD OF CHANGES JO 7110.65W
CHANGE
TO
BASICSUPPLEMENTS
OPTIONALCHANGE
TO
BASICSUPPLEMENTS
OPTIONAL
FAA Form 1320 −5 (6−80) USE PREVIOUS EDITION
Distribution: ZAT -710, ZAT -464 Initiated By: AJ V-0
Vice President, Mission Support Services
CHANGE U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION JO 7110.65W
CHG 1
Air Traffic Organization Policy Effective Date:
05/26/16
SUBJ: Air Traffic Control
1. Purpose of This Change . This change transmits revised pages to Federa l Aviation
Administration Order JO 7110.65 W, Air Traffic Control , and the Briefing Guide.
2. Audience . This change applies to all Air Traffic Organization ( ATO ) personnel and anyone
using ATO directives.
3. Where Can I Find This Change ? This change is available on the FAA Web site at
http://faa.gov/air_traffic/publications and http s://employees.faa.gov/tools_resources/orders_notices/.
4. Explanation of Policy Change . See the Explanation of Changes attachment which has
editorial corrections and changes su bmitted through normal procedures. The Briefing Guide lists
only new or modified material, along with background.
5. Distribution . This change is distributed to selected offices in Washington headquarters,
regional offices, service area offices, the Will iam J. Hughes Technical Center, and the Mike
Monroney Aeronautical Center. Also, copies are sent to all air traffic field facilities and
international aviation field offices; and to interested aviation public.
6. Disposition of Transmittal . Retain this tr ansmittal until superseded by a new basic order.
7. Page Control Chart . See the page control chart attachment .
Elizabeth L. Ray
Vice President, Mission Support Services
Air Traffic Organization
Date: __________________________
JO 7110.65W CHG 1 5/26/16
Explanation of Changes E of C−1Explanation of Changes
Change 1
Direct questions through appropriate facility/service center office staff
to the Office of Primary Interest (OPI)
a. 1-1-9. REQUESTS FOR INTERPRETA-
TIONS OR CLARIFICATIONS
This change adds processes for requesting
interpretations or clarifications pertaining to FAA
Order JO 7110.65 content.
b. 1-2-6. ABBREVIATIONS
2-3-10. CONTROL SYMBOLOGY2-4-17. NUMBERS USAGE
2-5-2. NA V AID TERMS
2-5-3. NA V AID FIXES
3-3-2. CLOSED/UNSAFE RUNWAY
INFORMATION
3-7-5. PRECISION APPROACH
CRITICAL AREA
4-1-1. ALTITUDE AND DISTANCE
LIMITATIONS
4-6-4. HOLDING INSTRUCTIONS
4-7-5. MILITARY TURBOJET EN
ROUTE DESCENT
4-7-13. SWITCHING ILS/MLS
RUNWAYS
5-1-13. RADAR SERVICE
TERMINATION
5-9-2. FINAL APPROACH COURSE
INTERCEPTION
5-9-4. ARRIV AL INSTRUCTIONS
5-9-5. APPROACH SEPARATION
RESPONSIBILITY
5-9-6. SIMULTANEOUS DEPENDENT
APPROACHES
5-9-9. SIMULTANEOUS OFFSET
INSTRUMENT APPROACHES (SOIA) –
HIGH UPDATE RADAR
5-13-1. MONITOR ON PAR
EQUIPMENT
5-13-3. MONITOR INFORMATION
13-1-8. RECORDING OF CONTROL
DATA
Due to lack of MLS and approach procedures in the
NAS, this change removes all MLS references.c.1-2-6. ABBREVIATIONS
This change adds the abbreviation “NOWGT” to
the subject paragraph.
d. 2-3-6. AIRCRAFT TYPE
This change deletes the contents of Appendices A,
B, and C, and redirects the reader to FAA Order
7360.1, Aircraft Type Designators.
e. 2-6-2. HAZARDOUS INFLIGHT
WEATHER ADVISORY SERVICE
2-9-3. CONTENT
This change reflects the migration of the En Route
Flight Advisory Service responsibilities into the
InFlight position and the discontinued use of the
term “Flight Watch” within the CONUS and Puerto
Rico.
f. 2-6-4. WEATHER AND CHAFF
SERVICES
This change adds the requirement for issuing an
altitude to maintain when clearing an aircraft to
deviate after a crossing altitude had already been
issued, including Climb Via or Descend Viaclearances on SID/STAR procedures.
g.2-10-1. EN ROUTE SECTOR TEAM
POSITION RESPONSIBILITIES
This change adds oceanic sector teams to the title
and deletes subparagraph 2-10-1a2. It also removesthe remaining subparagraph designators that are no
longer needed.
h.2-10-2. TERMINAL RADAR/
NONRADAR TEAM RESPONSIBILITIES
This change deletes subparagraph 2-10-2a2 and
removes the subparagraph 2-10-2 designators that
are no longer needed.
i.2-10-3. TOWER TEAM
RESPONSIBILITIES
This change deletes subparagraph 2-10-3a2 and
removes the subparagraph 2-10-3a designators that
are no longer needed.
JO 7110.65W CHG 1 5/26/16
E of C−2j.3-3-7. FAR FIELD MONITOR (FFM)
REMOTE STATUS UNIT
The MM, or in the absence of a MM, 1/2 mile final
and the IM or CAT II Missed Approach Point(MAP) will be used as reference points for the
issuance of the localizer reliability advisory.
k.3-8-1. SEQUENCE/SPACING
APPLICATION
This change advises pilots to inform ATC as soon as
possible of any delay clearing the runway duringtheir stop-and-go or full stop landing.
l. 3-9-6. SAME RUNWAY SEPARATION
This change makes all the figures consistent with
the logic provided in the text. The shaded aircraft in
FIG 3-9-3 is moved to be within the confines of the
runway, similar to the departure aircraft depicted in
FIG 3-9-1 and FIG 3-9-2.
m. 3-9-9. NONINTERSECTING
CONVERGING RUNWAY OPERATIONS
This change relocates a subparagraph of 3-9-9, and
renumbers the remaining subparagraphs.
n. 3-10-5. LANDING CLEARANCE
This change allows controllers to be clearer with
their instructions when controlling aircraft in the
traffic pattern while utilizing LUAW procedures.
These additional examples will reduce pilotconfusion.
o. 4-2-5. ROUTE OR ALTITUDE
AMENDMENTS
This change conveys to ATC they cannot modify
these restrictions (speed and/or crossing altitudes)
since they are needed to ensure obstacle avoidance.
p. 4-3-2. DEPARTURE CLEARANCES
This change clarifies that both textual and graphic
ODPs can be assigned by ATC to ensure aircraft
separation.
q. 4-7-12. AIRPORT CONDITIONS
4-8-1. APPROACH CLEARANCE4-8-9. MISSED APPROACH
4-8-10. APPROACH INFORMATION
This change prescribes controller responsibility
when informed that a pilot will conduct Cold
Temperature Compensation (CTC).r. 4-8-1. APPROACH CLEARANCE
This change revises the associated FIG 4-8-5 to be
consistent with the content.
s.5-1-3. RADAR USE
This change provides procedural guidance for
facilities providing ATC services using ADS-B and
WAM as surveillance sources.
t.5-4-3. METHODS
This change allows the use of the CID as a means for
the transferring controller to identify an aircraft in
making an intra-facility point out.
u. 5−4−6. RECEIVING CONTROLLER
HANDOFF
Changes to this paragraph were inadvertently
omitted from the global implementation of thepreviously vetted FAA Order 71 10.31 1C, into FAA
Order 7110.65.
v. 5-6-2. METHODS
This change adds the requirement to issue an
altitude to maintain when clearing an aircraft to
deviate off of a procedure containing published
crossing restrictions except when the aircraft hasnot yet been cleared to navigate vertically.
w. 5-9-10. SIMULTANEOUS
INDEPENDENT APPROACHES TOWIDELY-SPACED PARALLEL RUNWAYS
WITHOUT FINAL MONITORS
This chang e allows controllers to discontinue using
1,000 feet vertical or 3 miles radar separationbetween aircraft conducting an RNA V (RNP)
approach that contains a radius-to-fix (RF) leg and
aircraft conducting a straight-in ILS/RNA V with
vertical guidance/GLS, or another RNA V (RNP)
approach with an RF leg once the aircraft areestablished on their respective approach proced-
ures.
x. 7-2-1. VISUAL SEPARATION
This change clarifies existing procedures and
responsibilities and revises phraseology to ensure
understanding of ATC clearances and instructions.
y. 7-4-4. APPROACHES TO MULTIPLE
RUNWAYS
This change permits the use of RNA V procedures
and direct courses that will intercept the extended
centerline of the runway at an angle not greater than
30 degrees, to be used in lieu of radar vectors. This
JO 7110.65W CHG 1 5/26/16
Explanation of Changes E of C−3change also permits use of procedures using
radius-to-fix legs that intercept final in lieu of
30-degree intercept provisions otherwise contained
in this paragraph.
z. 8-7-3. LONGITUDINAL SEPARATION
8-8-3. LONGITUDINAL SEPARATION8-9-3. LONGITUDINAL SEPARATION
8-10-3. LONGITUDINAL SEPARATION
This change implements ADS-B ITP to allow climb
and descent of appropriately equipped aircraft using
reduced separation in the oceanic domain upon pilot
request.
aa. 9-1-2. SPECIAL HANDLING
This change increases Air Traffic awareness that
aircraft using the call sign FLIGHT V AL will beperforming Flight Validation activities that are
similar to Flight Check activities, but no additional
priority is granted.
ab. 10-2-13. MANPADS ALERT
This change identifies the DEN as the FAA
Headquarters office for MANPADS notifications,
adds a clarification edit, and a reference to FAAOrder JO 7610.4.
ac. 11-1-1. DUTY RESPONSIBILITY
11-1-2. DUTIES AND RESPONSIBIL-
ITIES
11-1-3. TIME −BASED FLOW
MANAGEMENT (TBFM)
This change incorporates responsibilities for the use
of TBFM into FAA Order JO 7110.65. It providesspecific directions to facilities as to duties and
responsibilities.
ad. 13-1-9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION
This change adds the requirement for the first sector
displaying the Embedded Route Text (ERT) coding
to issue and acknowledge the ERT coding unless
otherwise coordinated or specified in appropriatefacility directives.
ae. Appendix A - Aircraft Information
Fixed-Wing Aircraft
Appendix B - Aircraft Information
Helicopters/Rotorcrafts
Appendix C - Aircraft Information
Specific Amateur −Built/Experimental Aircraft
This change directs readers to a new source of
aircraft information and deletes Appendices A, B,and C.
af.Entire publication
A global search and replace was conducted on the
term “A/FD − Airport/Facility Directory.” This
term is now being referred to as “Chart Supplement
U.S.”
Additional editorial/format changes were made
where necessary. Revision bars were not used
because of the insignificant nature of these changes.
JO 7110.65W 12/10/15
ERRATA SHEET
SUBJECT: FAA Order JO 7110.65W, Air Traffic Control, effective December 10, 2015.
This errata sheet transmits the revised pages to the subject order.
REMOVE PAGE DATED INSERT PAGE DATED
4−8−3 and 4−8−4 .................. 12/10/15 4−8−3 and 4−8−4 .................. 12/10/15
5−9−7 and 5−9−8 .................. 12/10/15 5−9−7 and 5−9−8 .................. 12/10/15
Attachment
JO 7110.65W 12/10/15
Explanation of Changes E of C−1Explanation of Changes
Basic
Direct questions through appropriate facility/service center office staff
to the Office of Primary Interest (OPI)
ag. 1-1-7. DELIVERY DATES
This change deletes the requirement to contact the
local National Geospatial/Intelligence Agency
representative to obtain required publications and
adds both the Defense Switching Network andcommercial telephone contact numbers to request
required publications.
ah. 1-2-6. ABBREVIATIONS
2-2-11. FORWARDING AMENDED
AND UTM DATA
2-6-2. HAZARDOUS INFLIGHT
WEATHER ADVISORY SERVICE (HIWAS)
2-10-1. EN ROUTE SECTOR TEAM
POSITION RESPONSIBILITIES
4-5-3. EXCEPTIONS4-6-3. DELAYS
5-1-6. SERVICE LIMITATIONS
5-2-2. DISCRETE ENVIRONMENT5-2-17. V ALIDATION OF MODE C
READOUT
5-3-3. BEACON IDENTIFICATION
METHODS
5-3-8. TARGET MARKERS
5-4-3. METHODS
5-4-5. TRANSERRING CONTROLLER
HANDOFF
5-4-7. POINT OUT
5-4-11. EN ROUTE FOURTH LINE
DATA BLOCK USAGE
5-5-4. MINIMA
5-5-9. SEPARATION FROM
OBSTRUCTIONS
5-5-10. ADJACENT AIRSPACE
5-5-11. EDGE OF SCOPE
5-6-2. METHODS5-14-1. CONFLICT ALERT (CA) AND
MODE C INTRUDER (MCI) ALERT
5-14-3. COMPUTER ENTRY OF
ASSIGNED ALTITUDE
5-14-5. SELECTED ALTITUDE LIMITS
5-14-8. CONTROLLER INITIATED
COAST TRACKS5-14-9. ERAM COMPUTER ENTRIES
OF HOLD INFORMATION
5-14-10. ERAM VISUAL INDICATOR
OF SPECIAL ACTIVITY AIRSPACE (SAA)
STATUS
10-2-5. EMERGENCY SITUATIONS
11-1-2. DUTIES AND
RESPONSIBILITIES
13-1-1. DESCRIPTION
13-1-2. CONFLICT DETECTION AND
RESOLUTION
13-1-3. TRIAL PLANNING
13-1-4. URET −BASED CLEARANCES
13-1-5. THE AIRCRAFT LIST (ACL),
DEPARTURE (DL), AND FLIGHT DATA
MANAGEMENT
13-1-6. MANUAL COORDINATION
AND THE COORDINATION MENU
13-1-7. HOLDING
13-1-8. RECORDING OF CONTROL
DATA
13-1-9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION
13-1-10. CURRENCY OF
TRAJECTORY INFORMATION
13-1-11. DELAY REPORTING
13-1-12. OVERDUE AIRCRAFT
13-1-14. FORCAST WINDS13-1-15. INTERFACILITY
CONNECTIVITY
13-1-16. PRIMARY RDP/FDP
OUTAGES
13-1-17. URET AIRSPACE
CONFIGURATION ELEMENTS
The changes are intended to be a verbatim
incorporation of previously vetted FAA Order
7110.311C, into FAA Order 7110.65. Some of the
paragraphs that will have ERAM terminologyadded to them also contain legacy terminology that
is no longer valid and those terms are being
removed. During this global cleanup, additionalparagraphs that were not part of FAA Order
JO 7110.65W 12/10/15
E of C−27110.311C but contained legacy terminology were
also identified. In these paragraphs, minor editorial
changes were made to remove outdated legacy
terms.
ai. 1-2-6. ABBREVIATIONS
2-1-6. SAFETY ALERTS
5-2-13. CODE MONITOR
5-2-17. V ALIDATION OF MODE C
5-4-6. RECEIVING CONTROLLER
HANDOFF
5-5-2. TARGET SEPARATION
5-5-4. MINIMA
5-15-1. APPLICATION
Chapter 5, Section 16. TPX-42
7-6-1. BASIC RADAR SERVICE TO VFR
AIRCRAFT
7-7-3. SEPARATION
7-8-3. SEPARATION
7-9-4. SEPARATION
This change includes new procedures for ADS-B
only surveillance as prescribed in the CARTS and
STARS ADS-B Only SRMD addendum. Chapter 5,
Section 15, has been revised to include STARS and
adds ERAM related Mode C content. Obsolete
provisions relating to TPX-42 and references toPIDP and DAIR have been removed. This change
also moves Target Resolution information now
contained in Chapter 7 NOTES into proceduralguidance. This change cancels and incorporates
N JO 7110.683, Guidance for the Implementation
of FUSION/Automatic Dependent Surveillance −
Broadcast (ADS −B) within Common Automated
Terminal System Model IIIE (CARTS) and
Standard Automation Replacement System(STARTS) effective January 29, 2015.
aj. 1-2-6. ABBREVIATIONS
8-1-7. OCEANIC NA VIGATIONAL
ERROR REPORTING (ONER)
PROCEDURES
This changes the title of paragraph of 8 −1−7 and
deletes the NOTE.
ak. 2-1-6. SAFETY ALERT
With this modification, paragraph 2-1-6b example
will comply with prescribed phraseology.
al. 2-1-19. WAKE TURBULENCE
2-1-20. WAKE TURBULENCE
CAUTIONARY ADVISORIES
2-4-14. WORDS AND PHRASES
2-4-21. DESCRIPTION OF AIRCRAFTTYPES
3-3-5. BRAKING ACTION ADVISORIES
3-7-3. GROUND OPERATIONS
3-10-10. ALTITUDE RESTRICTED
LOW APPROACH
4-8-11. PRACTICE APPROACHES
5-5-7. PASSING OR DIVERGING
7-2-1. VISUAL SEPARATION
This change adds the Super weight class to the
order. Where applicable, “When wake turbulence
separation is required” is used in lieu of excessive
wording.
am. 2-3-8. AIRCRAFT EQUIPMENT
SUFFIX
This change adds an additional aircraft equipment
suffix, Slant O (/O), for RVSM capable aircraft thatmaintain an operating transponder with no Mode C
altitude reporting capability. This suffix is for ATC
use only.
an.3-9-6. SAME RUNWAY SEPARATION
3-9-7. WAKE TURBULENCE
SEPARATION FOR INTERSECTION
DEPARTURES
3-9-8. INTERSECTING
RUNWAY/INTERSECTING FLIGHT PATH
OPERATIONS
3-9-9. NONINTERSECTING
CONVERGING RUNWAY OPERATIONS
3-10-3. SAME RUNWAY SEPARATION
3-10-4. INTERSECTING
RUNWAY/INTERSECTING FLIGHT PATH
OPERATIONS
5-5-4. MINIMA
5-5-7. PASSING OR DIVERGING
5-8-3. SUCCESSIVE OR
SIMULTANEOUS DEPARTURES
5-8-5. DEPARTURES AND ARRIV ALS
ON PARALLEL OR NONINTERSECTING
DIVERGING RUNWAYS
6-1-4. ADJACENT AIRPORT
OPERATION
6-1-5. ARRIV AL MINIMA
6-7-5. ARRIV AL MINIMA
7-4-3. CLEARANCE FOR VISUAL
APPROACH
7-4-4. APPROACHES TO MULTIPLE
RUNWAYS
7-6-7. SEQUENCING
This change adds the super weight class to the listed
paragraphs, modifies wake turbulence separation
JO 7110.65W 12/10/15
Explanation of Changes E of C−3minima behind the B757 aircraft, and adds a
requirement to provide 10 NM separation in front of
and behind an aircraft when the data block indicates
“NOWGT.” Paragraph 3-9-7 has been edited to
define the requirements of the procedure in aprogressive format for easier readability.
ao.3-9-9. NONINTERSECTING
CONVERGING RUNWAY OPERATIONS
The change describes the conditions where an
independent safety analysis specific to Converging
Runway Operations could provide an equivalent
level of safety and improve efficiency.
ap.4-3-2. DEPARTURE CLEARANCES
This change adds directive guidance not to solicit a
VCOA from the pilot. It also adds a new NOTEspecifying that pilots will advise ATC of their intent
to utilize the VCOA option.
aq.4-8-1. APPROACH CLEARANCE
This change reorganizes content to provide clarity.
ar. 4-8-11. PRACTICE APPROACHES
7-3-1. VFR-ON-TOP
10-6-5. SERVICES TO RESCUE
AIRCRAFT
This change removes the word “standard” while
ensuring the application of IFR separation.
as.5-4-2. TERMS
The change revises the term “point out” for
consistency and added clarity.
at.5-6-1. APPLICATION
This change removes the last sentence from
paragraph 5-6-1a due to misapplication related to
the vectoring and rerouting of RNA V aircraft. Allaircraft should be allowed to remain on their own
navigation to the extent possible, consistent with
operational needs and pilot requests.
au.5-9-6. SIMULTANEOUS DEPENDENT
APPROACHES
This change introduces the use of 1 mile radar
separation diagonally on simultaneous dependentapproaches when runway centerlines are separated
by at least 2,500 feet but no more than 3,600 feet;
and it alters the existing paragraph to account for thenew 3,600 foot standard. There are no additional
conditions or procedures required when utilizing
the 1 NM minimum separation standard.
av.5-9-7. SIMULTANEOUS
INDEPENDENT APPROACHES – DUAL
AND TRIPLE
This change incorporates the latest AFS guidance
concerning centerline spacing in the conduct of
simultaneous parallel approaches. This change also
articulates specific AFS mitigations not previously
included. Lastly, the paragraph has been
re-organized by moving monitoring requirementfrom the runway spacing provisions, and specifies
that FUSION is not to be used when conducting
final monitoring activities.
aw.5-9-8. SIMULTANEOUS
INDEPENDENT CLOSE PARALLEL
APPROACHES-HIGH UPDATE RADAR
5-9-9. SIMULTANEOUS
INDEPENDENT CLOSE PARALLEL
APPROACHES – HIGH UPDATE RADAR
NOT REQUIRED
5-9-10. SIMULTANEOUS OFFSET
INSTRUMENT APPROACHES
(SOIA)−HIGH UPDATE RADAR
5-9-11. SIMULTANEOUS
INDEPENDENT APPROACHES TO
WIDELY −SPACED PARALLEL RUNWAYS
WITHOUT FINAL MONITORS
This change revises paragraph 5 −9−8 to include
PRM Approaches to better articulate theappropriate circumstances when PRM approaches
need to be assigned to users which is lacking today.
This change also deletes paragraph 5 −9−9, and
renumbers 5 −9−10 and 5−9−11.
ax.5-9-11. TRANSITIONAL
PROCEDURES
This new paragraph allows a controller to issue
control instructions without incurring a loss of
separation which results in a low MOC.
ay. Entire Publication
Additional editorial/format changes were made
where necessary. Revision bars were not used
because of the insignificant nature of these changes.
JO 7110.65W CHG 1 05/26/16
i Table of ContentsTable of Contents
Chapter 1. General
Section 1. Introduction
Paragraph Page
1−1−1. PURPOSE OF THIS ORDER 1 −1−1 ............................................
1−1−2. AUDIENCE 1 −1−1 ..........................................................
1−1−3. WHERE TO FIND THIS ORDER 1 −1−1 ........................................
1−1−4. WHAT THIS ORDER CANCELS 1 −1−1 ........................................
1−1−5. EXPLANATION OF CHANGES 1 −1−1 .........................................
1−1−6. SUBMISSION CUTOFF AND EFFECTIVE DATES 1 −1−1 .........................
1−1−7. DELIVERY DATES 1 −1−1 ...................................................
1−1−8. RECOMMENDATIONS FOR PROCEDURAL CHANGES 1 −1−1 ....................
1−1−9. REQUESTS FOR INTERPRETATIONS OR CLARIFICATIONS TO THIS ORDER 1 −1−2
1−1−10. PROCEDURAL LETTERS OF AGREEMENT 1 −1−2 .............................
1−1−11. CONSTRAINTS GOVERNING SUPPLEMENTS AND PROCEDURAL
DEVIATIONS 1 −1−2 .....................................................
1−1−12. SAFETY MANAGEMENT SYSTEM (SMS) 1 −1−3 ..............................
1−1−13. REFERENCES TO FAA NON −AIR TRAFFIC ORGANIZATIONS 1 −1−3 ............
1−1−14. DISTRIBUTION 1 −1−3 .....................................................
Section 2. Terms of Reference
1−2−1. WORD MEANINGS 1 −2−1 ...................................................
1−2−2. COURSE DEFINITIONS 1 −2−2 ...............................................
1−2−3. NOTES 1−2−2 .............................................................
1−2−4. REFERENCES 1 −2−3 .......................................................
1−2−5. ANNOTATIONS 1 −2−3 ......................................................
1−2−6. ABBREVIATIONS 1 −2−3 ....................................................
Chapter 2. General Control
Section 1. General
2−1−1. ATC SERVICE 2 −1−1 .......................................................
2−1−2. DUTY PRIORITY 2 −1−1 .....................................................
2−1−3. PROCEDURAL PREFERENCE 2 −1−1 ..........................................
2−1−4. OPERATIONAL PRIORITY 2 −1−2 ............................................
2−1−5. EXPEDITIOUS COMPLIANCE 2 −1−3 .........................................
2−1−6. SAFETY ALERT 2 −1−3 ......................................................
2−1−7. INFLIGHT EQUIPMENT MALFUNCTIONS 2 −1−4 ...............................
2−1−8. MINIMUM FUEL 2 −1−4 .....................................................
2−1−9. REPORTING ESSENTIAL FLIGHT INFORMATION 2 −1−5 ........................
2−1−10. NAVAID MALFUNCTIONS 2 −1−5 ...........................................
2−1−11. USE OF MARSA 2 −1−5 .....................................................
2−1−12. MILITARY PROCEDURES 2 −1−6 ............................................
2−1−13. FORMATION FLIGHTS 2 −1−6 ...............................................
2−1−14. COORDINATE USE OF AIRSPACE 2 −1−6 .....................................
2−1−15. CONTROL TRANSFER 2 −1−7 ...............................................
05/26/16 JO 7110.65W CHG 1
ii Table of ContentsParagraph Page
2−1−16. SURFACE AREAS 2 −1−7 ...................................................
2−1−17. RADIO COMMUNICATIONS 2 −1−7 ..........................................
2−1−18. OPERATIONAL REQUESTS 2 −1−9 ...........................................
2−1−19. WAKE TURBULENCE 2 −1−9 ...............................................
2−1−20. WAKE TURBULENCE CAUTIONARY ADVISORIES 2 −1−9 .....................
2−1−21. TRAFFIC ADVISORIES 2 −1−10 ..............................................
2−1−22. BIRD ACTIVITY INFORMATION 2 −1−11 ......................................
2−1−23. TRANSFER OF POSITION RESPONSIBILITY 2 −1−11 ............................
2−1−24. WHEELS DOWN CHECK 2 −1−11 .............................................
2−1−25. SUPERVISORY NOTIFICATION 2 −1−11 .......................................
2−1−26. PILOT DEVIATION NOTIFICATION 2 −1−12 ....................................
2−1−27. TCAS RESOLUTION ADVISORIES 2 −1−12 ....................................
2−1−28. RVSM OPERATIONS 2 −1−12 .................................................
2−1−29. TERRAIN AWARENESS WARNING SYSTEM (TAWS) ALERTS 2 −1−13 ............
2−1−30. “BLUE LIGHTNING” EVENTS 2 −1−13 ........................................
Section 2. Flight Plans and Control Information
2−2−1. RECORDING INFORMATION 2 −2−1 ..........................................
2−2−2. FORWARDING INFORMATION 2 −2−1 .........................................
2−2−3. FORWARDING VFR DATA 2 −2−1 .............................................
2−2−4. MILITARY DVFR DEPARTURES 2 −2−1 ........................................
2−2−5. IFR TO VFR FLIGHT PLAN CHANGE 2 −2−1 ...................................
2−2−6. IFR FLIGHT PROGRESS DATA 2 −2−1 .........................................
2−2−7. MANUAL INPUT OF COMPUTER-ASSIGNED BEACON CODES 2 −2−2 ............
2−2−8. ALTRV INFORMATION 2 −2−2 ...............................................
2−2−9. COMPUTER MESSAGE VERIFICATION 2 −2−2 .................................
2−2−10. TRANSMIT PROPOSED FLIGHT PLAN 2 −2−3 .................................
2−2−11. FORWARDING AMENDED AND UTM DATA 2 −2−3 ............................
2−2−12. AIRBORNE MILITARY FLIGHTS 2 −2−4 ......................................
2−2−13. FORWARDING FLIGHT PLAN DATA BETWEEN U.S. ARTCCs AND
CANADIAN ACCs 2 −2−4 .................................................
2−2−14. TELETYPE FLIGHT DATA FORMAT − U.S. ARTCCs − CANADIAN ACCs 2 −2−4 ....
2−2−15. NORTH AMERICAN ROUTE PROGRAM (NRP) INFORMATION 2 −2−5 ............
Section 3. Flight Progress Strips
2−3−1. GENERAL 2 −3−1 ...........................................................
2−3−2. EN ROUTE DATA ENTRIES 2 −3−3 ............................................
2−3−3. OCEANIC DATA ENTRIES 2 −3−5 .............................................
2−3−4. TERMINAL DATA ENTRIES 2 −3−6 ...........................................
2−3−5. AIRCRAFT IDENTITY 2 −3−9 ................................................
2−3−6. AIRCRAFT TYPE 2 −3−10 .....................................................
2−3−7. USAF/USN UNDERGRADUATE PILOTS 2 −3−10 .................................
2−3−8. AIRCRAFT EQUIPMENT SUFFIX 2 −3−10 .......................................
2−3−9. CLEARANCE STATUS 2 −3−10 ................................................
2−3−10. CONTROL SYMBOLOGY 2 −3−12 ............................................
Section 4. Radio and Interphone Communications
2−4−1. RADIO COMMUNICATIONS 2 −4−1 ...........................................
2−4−2. MONITORING 2 −4−1 .......................................................
JO 7110.65W CHG 1 05/26/16
iii Table of ContentsParagraph Page
2−4−3. PILOT ACKNOWLEDGMENT/READ BACK 2 −4−1 ..............................
2−4−4. AUTHORIZED INTERRUPTIONS 2 −4−1 .......................................
2−4−5. AUTHORIZED TRANSMISSIONS 2 −4−1 .......................................
2−4−6. FALSE OR DECEPTIVE COMMUNICATIONS 2 −4−2 .............................
2−4−7. AUTHORIZED RELAYS 2 −4−2 ...............................................
2−4−8. RADIO MESSAGE FORMAT 2 −4−2 ...........................................
2−4−9. ABBREVIATED TRANSMISSIONS 2 −4−2 ......................................
2−4−10. INTERPHONE TRANSMISSION PRIORITIES 2 −4−2 ............................
2−4−11. PRIORITY INTERRUPTION 2 −4−3 ...........................................
2−4−12. INTERPHONE MESSAGE FORMAT 2 −4−3 ....................................
2−4−13. INTERPHONE MESSAGE TERMINATION 2 −4−4 ..............................
2−4−14. WORDS AND PHRASES 2 −4−4 ..............................................
2−4−15. EMPHASIS FOR CLARITY 2 −4−4 ............................................
2−4−16. ICAO PHONETICS 2 −4−5 ...................................................
2−4−17. NUMBERS USAGE 2 −4−5 ..................................................
2−4−18. NUMBER CLARIFICATION 2 −4−7 ...........................................
2−4−19. FACILITY IDENTIFICATION 2 −4−8 ..........................................
2−4−20. AIRCRAFT IDENTIFICATION 2 −4−8 .........................................
2−4−21. DESCRIPTION OF AIRCRAFT TYPES 2 −4−11 ..................................
2−4−22. AIRSPACE CLASSES 2 −4−11 ................................................
Section 5. Route and NAVAID Description
2−5−1. AIR TRAFFIC SERVICE (ATS) ROUTES 2 −5−1 .................................
2−5−2. NAVAID TERMS 2 −5−1 .....................................................
2−5−3. NAVAID FIXES 2 −5−2 .......................................................
Section 6. Weather Information
2−6−1. FAMILIARIZATION 2 −6−1 ...................................................
2−6−2. HAZARDOUS INFLIGHT WEATHER ADVISORY SERVICE (HIWAS) 2 −6−1 ........
2−6−3. PIREP INFORMATION 2 −6−1 ................................................
2−6−4. WEATHER AND CHAFF SERVICES 2 −6−2 .....................................
2−6−5. CALM WIND CONDITIONS 2 −6−5 ............................................
2−6−6. REPORTING WEATHER CONDITIONS 2 −6−5 ..................................
2−6−7. DISSEMINATING WEATHER INFORMATION 2 −6−6 ............................
Section 7. Altimeter Settings
2−7−1. CURRENT SETTINGS 2 −7−1 .................................................
2−7−2. ALTIMETER SETTING ISSUANCE BELOW LOWEST USABLE FL 2 −7−1 ..........
Section 8. Runway Visibility Reporting − Terminal
2−8−1. FURNISH RVR/RVV VALUES 2 −8−1 ..........................................
2−8−2. ARRIVAL/DEPARTURE RUNWAY VISIBILITY 2 −8−1 ...........................
2−8−3. TERMINOLOGY 2 −8−1 .....................................................
Section 9. Automatic Terminal Information Service Procedures
2−9−1. APPLICATION 2 −9−1 .......................................................
2−9−2. OPERATING PROCEDURES 2 −9−1 ...........................................
2−9−3. CONTENT 2 −9−2 ...........................................................
Section 10. Team Position Responsibilities
2−10−1. EN ROUTE OR OCEANIC SECTOR TEAM POSITION RESPONSIBILITIES 2 −10−1 ..
05/26/16 JO 7110.65W CHG 1
iv Table of ContentsParagraph Page
2−10−2. TERMINAL RADAR/NONRADAR TEAM POSITION RESPONSIBILITIES 2 −10−2 ...
2−10−3. TOWER TEAM POSITION RESPONSIBILITIES 2 −10−4 ..........................
Chapter 3. Airport Traffic Control − Terminal
Section 1. General
3−1−1. PROVIDE SERVICE 3 −1−1 ...................................................
3−1−2. PREVENTIVE CONTROL 3 −1−1 ..............................................
3−1−3. USE OF ACTIVE RUNWAYS 3 −1−1 ...........................................
3−1−4. COORDINATION BETWEEN LOCAL AND GROUND CONTROLLERS 3 −1−2 .......
3−1−5. VEHICLES/EQUIPMENT/PERSONNEL ON RUNWAYS 3 −1−2 .....................
3−1−6. TRAFFIC INFORMATION 3 −1−2 ..............................................
3−1−7. POSITION DETERMINATION 3 −1−2 ..........................................
3−1−8. LOW LEVEL WIND SHEAR/MICROBURST ADVISORIES 3 −1−3 ..................
3−1−9. USE OF TOWER RADAR DISPLAYS 3 −1−5 ....................................
3−1−10. OBSERVED ABNORMALITIES 3 −1−5 ........................................
3−1−11. SURFACE AREA RESTRICTIONS 3 −1−5 ......................................
3−1−12. VISUALLY SCANNING RUNWAYS 3 −1−6 ....................................
3−1−13. ESTABLISHING TWO −WAY COMMUNICATIONS 3 −1−6 ........................
3−1−14. GROUND OPERATIONS WHEN VOLCANIC ASH IS PRESENT 3 −1−6 ............
3−1−15. GROUND OPERATIONS RELATED TO THREE/FOUR −HOUR TARMAC RULE 3 −1−6
Section 2. Visual Signals
3−2−1. LIGHT SIGNALS 3 −2−1 .....................................................
3−2−2. WARNING SIGNAL 3 −2−1 ...................................................
3−2−3. RECEIVER-ONLY ACKNOWLEDGMENT 3 −2−1 ................................
Section 3. Airport Conditions
3−3−1. LANDING AREA CONDITION 3 −3−1 .........................................
3−3−2. CLOSED/UNSAFE RUNWAY INFORMATION 3 −3−1 .............................
3−3−3. TIMELY INFORMATION 3 −3−1 ..............................................
3−3−4. BRAKING ACTION 3 −3−2 ...................................................
3−3−5. BRAKING ACTION ADVISORIES 3 −3−2 ......................................
3−3−6. ARRESTING SYSTEM OPERATION 3 −3−3 .....................................
3−3−7. FAR FIELD MONITOR (FFM) REMOTE STATUS UNIT 3 −3−4 .....................
Section 4. Airport Lighting
3−4−1. EMERGENCY LIGHTING 3 −4−1 .............................................
3−4−2. RUNWAY END IDENTIFIER LIGHTS 3 −4−1 ....................................
3−4−3. VISUAL APPROACH SLOPE INDICATORS (VASI) 3 −4−1 ........................
3−4−4. PRECISION APPROACH PATH INDICATORS (PAPI) 3 −4−1 .......................
3−4−5. APPROACH LIGHTS 3 −4−2 ..................................................
3−4−6. ALS INTENSITY SETTINGS 3 −4−2 ...........................................
3−4−7. SEQUENCED FLASHING LIGHTS (SFL) 3 −4−2 .................................
3−4−8. MALSR/ODALS 3 −4−2 ......................................................
3−4−9. ALSF−2/SSALR 3 −4−3 ......................................................
3−4−10. RUNWAY EDGE LIGHTS 3 −4−3 .............................................
3−4−11. HIGH INTENSITY RUNWAY, RUNWAY CENTERLINE, AND TOUCHDOWN
ZONE LIGHTS 3 −4−4 ....................................................
JO 7110.65W CHG 1 05/26/16
v Table of ContentsParagraph Page
3−4−12. HIRL ASSOCIATED WITH MALSR 3 −4−4 ....................................
3−4−13. HIRL CHANGES AFFECTING RVR 3 −4−4 ....................................
3−4−14. MEDIUM INTENSITY RUNWAY LIGHTS 3 −4−4 ...............................
3−4−15. SIMULTANEOUS APPROACH AND RUNWAY EDGE LIGHT OPERATION 3 −4−4 ...
3−4−16. HIGH SPEED TURNOFF LIGHTS 3 −4−5 ......................................
3−4−17. TAXIWAY LIGHTS 3 −4−5 ..................................................
3−4−18. OBSTRUCTION LIGHTS 3 −4−5 .............................................
3−4−19. ROTATING BEACON 3 −4−5 ................................................
3−4−20. RUNWAY STATUS LIGHTS (RWSL) 3 −4−5 ....................................
Section 5. Runway Selection
3−5−1. SELECTION 3 −5−1 .........................................................
3−5−2. STOL RUNWAYS 3 −5−1 .....................................................
3−5−3. TAILWIND COMPONENTS 3 −5−1 ............................................
Section 6. Airport Surface Detection Procedures
3−6−1. EQUIPMENT USAGE 3 −6−1 .................................................
3−6−2. IDENTIFICATION 3 −6−1 ....................................................
3−6−3. INFORMATION USAGE 3 −6−1 ...............................................
3−6−4. SAFETY LOGIC ALERT RESPONSES 3 −6−1 ...................................
3−6−5. RADAR −ONLY MODE 3 −6−2 ................................................
Section 7. Taxi and Ground Movement Procedures
3−7−1. GROUND TRAFFIC MOVEMENT 3 −7−1 .......................................
3−7−2. TAXI AND GROUND MOVEMENT OPERATIONS 3 −7−2 .........................
3−7−3. GROUND OPERATIONS 3 −7−4 ...............................................
3−7−4. RUNWAY PROXIMITY 3 −7−4 ................................................
3−7−5. PRECISION APPROACH CRITICAL AREA 3 −7−4 ...............................
3−7−6. PRECISION OBSTACLE FREE ZONE (POFZ) AND FINAL APPROACH
OBSTACLE CLEARANCE SURFACES (OCS) 3 −7−5 ..........................
Section 8. Spacing and Sequencing
3−8−1. SEQUENCE/SPACING APPLICATION 3 −8−1 ...................................
3−8−2. TOUCH-AND-GO OR STOP-AND-GO OR LOW APPROACH 3 −8−1 ................
3−8−3. SIMULTANEOUS SAME DIRECTION OPERATION 3 −8−1 ........................
3−8−4. SIMULTANEOUS OPPOSITE DIRECTION OPERATION 3 −8−2 ....................
Section 9. Departure Procedures and Separation
3−9−1. DEPARTURE INFORMATION 3 −9−1 ..........................................
3−9−2. DEPARTURE DELAY INFORMATION 3 −9−1 ...................................
3−9−3. DEPARTURE CONTROL INSTRUCTIONS 3 −9−2 ................................
3−9−4. LINE UP AND WAIT (LUAW) 3 −9−2 ..........................................
3−9−5. ANTICIPATING SEPARATION 3 −9−4 ..........................................
3−9−6. SAME RUNWAY SEPARATION 3 −9−4 .........................................
3−9−7. WAKE TURBULENCE SEPARATION FOR INTERSECTION DEPARTURES 3 −9−6 ....
3−9−8. INTERSECTING RUNWAY/INTERSECTING FLIGHT PATH OPERATIONS 3 −9−7 ....
3−9−9. NONINTERSECTING CONVERGING RUNWAY OPERATIONS 3 −9−9 ..............
3−9−10. TAKEOFF CLEARANCE 3 −9−11 ..............................................
3−9−11. CANCELLATION OF TAKEOFF CLEARANCE 3 −9−12 ...........................
05/26/16 JO 7110.65W CHG 1
vi Table of ContentsSection 10. Arrival Procedures and Separation
Paragraph Page
3−10−1. LANDING INFORMATION 3 −10−1 ............................................
3−10−2. FORWARDING APPROACH INFORMATION BY NONAPPROACH
CONTROL FACILITIES 3 −10−1 ............................................
3−10−3. SAME RUNWAY SEPARATION 3 −10−2 ........................................
3−10−4. INTERSECTING RUNWAY/INTERSECTING FLIGHT PATH SEPARATION 3 −10−3 ...
3−10−5. LANDING CLEARANCE 3 −10−6 .............................................
3−10−6. ANTICIPATING SEPARATION 3 −10−7 .........................................
3−10−7. LANDING CLEARANCE WITHOUT VISUAL OBSERVATION 3 −10−7 ..............
3−10−8. WITHHOLDING LANDING CLEARANCE 3 −10−8 ...............................
3−10−9. RUNWAY EXITING 3 −10−8 ..................................................
3−10−10. ALTITUDE RESTRICTED LOW APPROACH 3 −10−8 ...........................
3−10−11. CLOSED TRAFFIC 3 −10−9 ..................................................
3−10−12. OVERHEAD MANEUVER 3 −10−9 ...........................................
3−10−13. SIMULATED FLAMEOUT (SFO) APPROACHES/EMERGENCY LANDING
PATTERN (ELP) OPERATIONS/PRACTICE PRECAUTIONARY
APPROACHES 3 −10−10 ....................................................
Section 11. Helicopter Operations
3−11−1. TAXI AND GROUND MOVEMENT OPERATION 3 −11−1 .........................
3−11−2. HELICOPTER TAKEOFF CLEARANCE 3 −11−1 .................................
3−11−3. HELICOPTER DEPARTURE SEPARATION 3 −11−2 ..............................
3−11−4. HELICOPTER ARRIVAL SEPARATION 3 −11−3 .................................
3−11−5. SIMULTANEOUS LANDINGS OR TAKEOFFS 3 −11−3 ...........................
3−11−6. HELICOPTER LANDING CLEARANCE 3 −11−4 .................................
Section 12. Sea Lane Operations
3−12−1. APPLICATION 3 −12−1 ......................................................
3−12−2. DEPARTURE SEPARATION 3 −12−1 ...........................................
3−12−3. ARRIVAL SEPARATION 3 −12−1 ..............................................
Chapter 4. IFR
Section 1. NAVAID Use Limitations
4−1−1. ALTITUDE AND DISTANCE LIMITATIONS 4 −1−1 ..............................
4−1−2. EXCEPTIONS 4 −1−1 ........................................................
4−1−3. CROSSING ALTITUDE 4 −1−2 ................................................
4−1−4. VFR-ON-TOP 4 −1−2 ........................................................
4−1−5. FIX USE 4−1−2 ............................................................
Section 2. Clearances
4−2−1. CLEARANCE ITEMS 4 −2−1 .................................................
4−2−2. CLEARANCE PREFIX 4 −2−1 .................................................
4−2−3. DELIVERY INSTRUCTIONS 4 −2−1 ...........................................
4−2−4. CLEARANCE RELAY 4 −2−1 .................................................
4−2−5. ROUTE OR ALTITUDE AMENDMENTS 4 −2−1 .................................
4−2−6. THROUGH CLEARANCES 4 −2−3 .............................................
4−2−7. ALTRV CLEARANCE 4 −2−3 .................................................
4−2−8. IFR−VFR AND VFR −IFR FLIGHTS 4 −2−3 ......................................
JO 7110.65W CHG 1 05/26/16
vii Table of ContentsParagraph Page
4−2−9. CLEARANCE ITEMS 4 −2−3 .................................................
4−2−10. CANCELLATION OF IFR FLIGHT PLAN 4 −2−4 ................................
Section 3. Departure Procedures
4−3−1. DEPARTURE TERMINOLOGY 4 −3−1 .........................................
4−3−2. DEPARTURE CLEARANCES 4 −3−1 ...........................................
4−3−3. ABBREVIATED DEPARTURE CLEARANCE 4 −3−4 ..............................
4−3−4. DEPARTURE RESTRICTIONS, CLEARANCE VOID TIMES, HOLD FOR
RELEASE, AND RELEASE TIMES 4 −3−6 ...................................
4−3−5. GROUND STOP 4 −3−8 ......................................................
4−3−6. DELAY SEQUENCING 4 −3−8 ................................................
4−3−7. FORWARD DEPARTURE DELAY INFORMATION 4 −3−8 .........................
4−3−8. COORDINATION WITH RECEIVING FACILITY 4 −3−8 ..........................
4−3−9. VFR RELEASE OF IFR DEPARTURE 4 −3−8 ....................................
4−3−10. FORWARDING DEPARTURE TIMES 4 −3−8 ...................................
Section 4. Route Assignment
4−4−1. ROUTE USE 4 −4−1 .........................................................
4−4−2. ROUTE STRUCTURE TRANSITIONS 4 −4−2 ...................................
4−4−3. DEGREE-DISTANCE ROUTE DEFINITION FOR MILITARY OPERATIONS 4 −4−3 ....
4−4−4. ALTERNATIVE ROUTES 4 −4−3 ..............................................
4−4−5. CLASS G AIRSPACE 4 −4−3 ..................................................
4−4−6. DIRECT CLEARANCES 4 −4−4 ...............................................
Section 5. Altitude Assignment and Verification
4−5−1. VERTICAL SEPARATION MINIMA 4 −5−1 .....................................
4−5−2. FLIGHT DIRECTION 4 −5−1 ..................................................
4−5−3. EXCEPTIONS 4 −5−1 ........................................................
4−5−4. LOWEST USABLE FLIGHT LEVEL 4 −5−2 .....................................
4−5−5. ADJUSTED MINIMUM FLIGHT LEVEL 4 −5−2 .................................
4−5−6. MINIMUM EN ROUTE ALTITUDES 4 −5−2 .....................................
4−5−7. ALTITUDE INFORMATION 4 −5−3 ............................................
4−5−8. ANTICIPATED ALTITUDE CHANGES 4 −5−8 ...................................
4−5−9. ALTITUDE CONFIRMATION − NONRADAR 4 −5−8 ..............................
Section 6. Holding Aircraft
4−6−1. CLEARANCE TO HOLDING FIX 4 −6−1 .......................................
4−6−2. CLEARANCE BEYOND FIX 4 −6−2 ...........................................
4−6−3. DELAYS 4−6−2 ............................................................
4−6−4. HOLDING INSTRUCTIONS 4 −6−3 ............................................
4−6−5. VISUAL HOLDING POINTS 4 −6−3 ............................................
4−6−6. HOLDING FLIGHT PATH DEVIATION 4 −6−3 ...................................
4−6−7. UNMONITORED NAVAIDs 4 −6−3 .............................................
4−6−8. ILS PROTECTION/CRITICAL AREAS 4 −6−3 ...................................
Section 7. Arrival Procedures
4−7−1. CLEARANCE INFORMATION 4 −7−1 ..........................................
4−7−2. ADV ANCE DESCENT CLEARANCE 4 −7−1 ....................................
4−7−3. SINGLE FREQUENCY APPROACHES (SFA) 4 −7−1 ..............................
05/26/16 JO 7110.65W CHG 1
viii Table of ContentsParagraph Page
4−7−4. RADIO FREQUENCY AND RADAR BEACON CHANGES FOR MILITARY
AIRCRAFT 4 −7−2 .......................................................
4−7−5. MILITARY TURBOJET EN ROUTE DESCENT 4 −7−2 ............................
4−7−6. ARRIVAL INFORMATION 4 −7−3 .............................................
4−7−7. WEATHER INFORMATION 4 −7−3 ............................................
4−7−8. BELOW MINIMA REPORT BY PILOT 4 −7−4 ...................................
4−7−9. TRANSFER OF JURISDICTION 4 −7−4 .........................................
4−7−10. APPROACH INFORMATION 4 −7−4 ..........................................
4−7−11. ARRIVAL INFORMATION BY APPROACH CONTROL FACILITIES 4 −7−5 .........
4−7−12. AIRPORT CONDITIONS 4 −7−5 ..............................................
4−7−13. SWITCHING ILS RUNWAYS 4 −7−6 ..........................................
Section 8. Approach Clearance Procedures
4−8−1. APPROACH CLEARANCE 4 −8−1 .............................................
4−8−2. CLEARANCE LIMIT 4 −8−6 ..................................................
4−8−3. RELAYED APPROACH CLEARANCE 4 −8−6 ...................................
4−8−4. ALTITUDE ASSIGNMENT FOR MILITARY HIGH ALTITUDE INSTRUMENT
APPROACHES 4 −8−6 ....................................................
4−8−5. SPECIFYING ALTITUDE 4 −8−6 ..............................................
4−8−6. CIRCLING APPROACH 4 −8−7 ...............................................
4−8−7. SIDE−STEP MANEUVER 4 −8−7 ..............................................
4−8−8. COMMUNICATIONS RELEASE 4 −8−7 ........................................
4−8−9. MISSED APPROACH 4 −8−7 ..................................................
4−8−10. APPROACH INFORMATION 4 −8−8 ..........................................
4−8−11. PRACTICE APPROACHES 4 −8−8 ............................................
4−8−12. LOW APPROACH AND TOUCH-AND-GO 4 −8−9 ...............................
Chapter 5. Radar
Section 1. General
5−1−1. PRESENTATION AND EQUIPMENT PERFORMANCE 5 −1−1 .....................
5−1−2. ALIGNMENT ACCURACY CHECK 5 −1−1 .....................................
5−1−3. ATC SURVEILLANCE SOURCEUSE 5 −1−1 ....................................
5−1−4. BEACON RANGE ACCURACY 5 −1−2 .........................................
5−1−5. ELECTRONIC ATTACK (EA) ACTIVITY 5 −1−2 .................................
5−1−6. SERVICE LIMITATIONS 5 −1−3 ...............................................
5−1−7. ELECTRONIC CURSOR 5 −1−3 ...............................................
5−1−8. MERGING TARGET PROCEDURES 5 −1−3 .....................................
5−1−9. HOLDING PATTERN SURVEILLANCE 5 −1−4 ..................................
5−1−10. DEVIATION ADVISORIES 5 −1−4 ............................................
5−1−11. RADAR FIX POSTING 5 −1−4 ...............................................
5−1−12. POSITION REPORTING 5 −1−4 ..............................................
5−1−13. RADAR SERVICE TERMINATION 5 −1−4 .....................................
Section 2. Beacon Systems
5−2−1. ASSIGNMENT CRITERIA 5 −2−1 .............................................
5−2−2. DISCRETE ENVIRONMENT 5 −2−1 ...........................................
5−2−3. NONDISCRETE ENVIRONMENT 5 −2−1 .......................................
5−2−4. MIXED ENVIRONMENT 5 −2−1 ..............................................
JO 7110.65W CHG 1 05/26/16
ix Table of ContentsParagraph Page
5−2−5. RADAR BEACON CODE CHANGES 5 −2−2 ....................................
5−2−6. FUNCTION CODE ASSIGNMENTS 5 −2−2 .....................................
5−2−7. EMERGENCY CODE ASSIGNMENT 5 −2−3 ....................................
5−2−8. RADIO FAILURE 5 −2−3 .....................................................
5−2−9. VFR CODE ASSIGNMENTS 5 −2−3 ............................................
5−2−10. BEACON CODE FOR PRESSURE SUIT FLIGHTS AND FLIGHTS ABOVE
FL 600 5 −2−4 ...........................................................
5−2−11. AIR DEFENSE EXERCISE BEACON CODE ASSIGNMENT 5 −2−4 ................
5−2−12. STANDBY OR LOW SENSITIVITY OPERATION 5 −2−5 .........................
5−2−13. CODE MONITOR 5 −2−5 ....................................................
5−2−14. FAILURE TO DISPLAY ASSIGNED BEACON CODE OR INOPERATIVE/
MALFUNCTIONING TRANSPONDER 5 −2−5 ................................
5−2−15. INOPERATIVE OR MALFUNCTIONING INTERROGATOR 5 −2−6 ................
5−2−16. FAILED TRANSPONDER IN CLASS A AIRSPACE 5 −2−6 ........................
5−2−17. VALIDATION OF MODE C READOUT 5 −2−6 ..................................
5−2−18. ALTITUDE CONFIRMATION − MODE C 5 −2−7 ................................
5−2−19. ALTITUDE CONFIRMATION − NON−MODE C 5 −2−7 ...........................
5−2−20. AUTOMA TIC ALTITUDE REPORTING 5 −2−8 .................................
5−2−21. INFLIGHT DEVIATIONS FROM TRANSPONDER/MODE C REQUIREMENTS
BETWEEN 10,000 FEET AND 18,000 FEET 5 −2−8 ...........................
5−2−22. BEACON TERMINATION 5 −2−8 .............................................
5−2−23. ALTITUDE FILTERS 5 −2−9 .................................................
5−2−24. INOPERATIVE OR MALFUNCTIONING ADS-B TRANSMITTER 5 −2−9 ...........
Section 3. Radar Identification
5−3−1. APPLICATION 5 −3−1 .......................................................
5−3−2. PRIMARY RADAR IDENTIFICATION METHODS 5 −3−1 .........................
5−3−3. BEACON IDENTIFICATION METHODS 5 −3−1 .................................
5−3−4. TERMINAL AUTOMA TION SYSTEMS IDENTIFICATION METHODS 5 −3−2 ........
5−3−5. QUESTIONABLE IDENTIFICATION 5 −3−2 ....................................
5−3−6. POSITION INFORMATION 5 −3−2 .............................................
5−3−7. IDENTIFICATION STATUS 5 −3−2 .............................................
5−3−8. TARGET MARKERS 5 −3−3 ..................................................
5−3−9. TARGET MARKERS 5 −3−3 ..................................................
Section 4. Transfer of Radar Identification
5−4−1. APPLICATION 5 −4−1 .......................................................
5−4−2. TERMS 5−4−1 .............................................................
5−4−3. METHODS 5 −4−1 ..........................................................
5−4−4. TRAFFIC 5 −4−2 ............................................................
5−4−5. TRANSFERRING CONTROLLER HANDOFF 5 −4−2 .............................
5−4−6. RECEIVING CONTROLLER HANDOFF 5 −4−3 ..................................
5−4−7. POINT OUT 5 −4−4 .........................................................
5−4−8. AUTOMA TED INFORMATION TRANSFER (AIT) 5 −4−5 .........................
5−4−9. INTERFACILITY AUTOMA TED INFORMATION TRANSFER 5 −4−5 ...............
5−4−10. PREARRANGED COORDINATION 5 −4−5 .....................................
5−4−11. EN ROUTE FOURTH LINE DATA BLOCK USAGE 5 −4−5 ........................
Section 5. Radar Separation
5−5−1. APPLICATION 5 −5−1 .......................................................
05/26/16 JO 7110.65W CHG 1
x Table of ContentsParagraph Page
5−5−2. TARGET SEPARATION 5 −5−1 ................................................
5−5−3. TARGET RESOLUTION 5 −5−2 ...............................................
5−5−4. MINIMA 5−5−2 ............................................................
5−5−5. VERTICAL APPLICATION 5 −5−5 .............................................
5−5−6. EXCEPTIONS 5 −5−5 ........................................................
5−5−7. PASSING OR DIVERGING 5 −5−5 .............................................
5−5−8. ADDITIONAL SEPARATION FOR FORMATION FLIGHTS 5 −5−6 ..................
5−5−9. SEPARATION FROM OBSTRUCTIONS 5 −5−7 ..................................
5−5−10. ADJACENT AIRSPACE 5 −5−7 ...............................................
5−5−11. EDGE OF SCOPE 5 −5−7 ....................................................
5−5−12. BEACON TARGET DISPLACEMENT 5 −5−8 ...................................
Section 6. Vectoring
5−6−1. APPLICATION 5 −6−1 .......................................................
5−6−2. METHODS 5 −6−1 ..........................................................
5−6−3. VECTORS BELOW MINIMUM ALTITUDE 5 −6−2 ...............................
Section 7. Speed Adjustment
5−7−1. APPLICATION 5 −7−1 .......................................................
5−7−2. METHODS 5 −7−2 ..........................................................
5−7−3. MINIMA 5−7−3 ............................................................
5−7−4. TERMINATION 5 −7−4 ......................................................
Section 8. Radar Departures
5−8−1. PROCEDURES 5 −8−1 .......................................................
5−8−2. INITIAL HEADING 5 −8−1 ...................................................
5−8−3. SUCCESSIVE OR SIMULTANEOUS DEPARTURES 5 −8−1 ........................
5−8−4. DEPARTURE AND ARRIVAL 5 −8−3 ...........................................
5−8−5. DEPARTURES AND ARRIVALS ON PARALLEL OR NONINTERSECTING
DIVERGING RUNWAYS 5 −8−3 ...........................................
Section 9. Radar Arrivals
5−9−1. VECTORS TO FINAL APPROACH COURSE 5 −9−1 ..............................
5−9−2. FINAL APPROACH COURSE INTERCEPTION 5 −9−1 ............................
5−9−3. VECTORS ACROSS FINAL APPROACH COURSE 5 −9−2 .........................
5−9−4. ARRIVAL INSTRUCTIONS 5 −9−2 ............................................
5−9−5. APPROACH SEPARATION RESPONSIBILITY 5 −9−4 ............................
5−9−6. SIMULTANEOUS DEPENDENT APPROACHES 5 −9−5 ...........................
5−9−7. SIMULTANEOUS INDEPENDENT APPROACHES − DUAL & TRIPLE 5 −9−6 ........
5−9−8. SIMULTANEOUS INDEPENDENT CLOSE PARALLEL APPROACHES –
PRECISION RUNWAY MONITOR (PRM) APPROACHES 5 −9−8 ................
5−9−9. SIMULTANEOUS OFFSET INSTRUMENT APPROACHES (SOIA) − HIGH
UPDA TE RADAR 5 −9−9 .................................................
5−9−10. SIMULTANEOUS INDEPENDENT APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINAL MONITORS 5 −9−12 .................
5−9−11. TRANSITIONAL PROCEDURE 5 −9−13 ........................................
Section 10. Radar Appr oaches− Terminal
5−10−1. APPLICATION 5 −10−1 ......................................................
5−10−2. APPROACH INFORMATION 5 −10−1 ..........................................
JO 7110.65W CHG 1 05/26/16
xi Table of ContentsParagraph Page
5−10−3. NO-GYRO APPROACH 5 −10−2 ...............................................
5−10−4. LOST COMMUNICATIONS 5 −10−2 ...........................................
5−10−5. RADAR CONTACT LOST 5 −10−3 .............................................
5−10−6. LANDING CHECK 5 −10−3 ...................................................
5−10−7. POSITION INFORMATION 5 −10−3 ............................................
5−10−8. FINAL CONTROLLER CHANGEOVER 5 −10−3 .................................
5−10−9. COMMUNICATIONS CHECK 5 −10−4 .........................................
5−10−10. TRANSMISSION ACKNOWLEDGMENT 5 −10−4 ...............................
5−10−11. MISSED APPROACH 5 −10−4 ................................................
5−10−12. LOW APPROACH AND TOUCH-AND-GO 5 −10−4 ..............................
5−10−13. TOWER CLEARANCE 5 −10−4 ..............................................
5−10−14. FINAL APPROACH ABNORMALITIES 5 −10−5 ................................
5−10−15. MILITARY SINGLE FREQUENCY APPROACHES 5 −10−5 .......................
Section 11. Surveillance Appr oaches− Terminal
5−11−1. ALTITUDE INFORMATION 5 −11−1 ...........................................
5−11−2. VISUAL REFERENCE REPORT 5 −11−1 ........................................
5−11−3. DESCENT NOTIFICATION 5 −11−1 ............................................
5−11−4. DESCENT INSTRUCTIONS 5 −11−1 ...........................................
5−11−5. FINAL APPROACH GUIDANCE 5 −11−1 .......................................
5−11−6. APPROACH GUIDANCE TERMINATION 5 −11−2 ...............................
Section 12. P AR Appr oaches− Terminal
5−12−1. GLIDEPATH NOTIFICATION 5 −12−1 ..........................................
5−12−2. DECISION HEIGHT (DH) NOTIFICATION 5 −12−1 ...............................
5−12−3. DESCENT INSTRUCTION 5 −12−1 ............................................
5−12−4. GLIDEPATH AND COURSE INFORMATION 5 −12−1 .............................
5−12−5. DISTANCE FROM TOUCHDOWN 5 −12−1 ......................................
5−12−6. DECISION HEIGHT 5 −12−1 ..................................................
5−12−7. POSITION ADVISORIES 5 −12−1 ..............................................
5−12−8. APPROACH GUIDANCE TERMINATION 5 −12−2 ...............................
5−12−9. COMMUNICATION TRANSFER 5 −12−2 .......................................
5−12−10. ELEVATION FAILURE 5 −12−2 ..............................................
5−12−11. SURVEILLANCE UNUSABLE 5 −12−3 ........................................
Section 13. Use of PAR for Approach Monitoring − Terminal
5−13−1. MONITOR ON PAR EQUIPMENT 5 −13−1 ......................................
5−13−2. MONITOR AVAILABILITY 5 −13−1 ...........................................
5−13−3. MONITOR INFORMATION 5 −13−1 ...........................................
Section 14. Automation − En Route
5−14−1. CONFLICT ALERT (CA) AND MODE C INTRUDER (MCI) ALERT 5 −14−1 ..........
5−14−2. EN ROUTE MINIMUM SAFE ALTITUDE WARNING (E-MSAW) 5 −14−1 ............
5−14−3. COMPUTER ENTRY OF FLIGHT PLAN INFORMATION 5 −14−2 ..................
5−14−4. ENTRY OF REPORTED ALTITUDE 5 −14−2 ....................................
5−14−5. SELECTED ALTITUDE LIMITS 5 −14−2 .......................................
5−14−6. SECTOR ELIGIBILITY 5 −14−2 ...............................................
5−14−7. COAST TRACKS 5 −14−3 ....................................................
5−14−8. CONTROLLER INITIATED COAST TRACKS 5 −14−3 ............................
05/26/16 JO 7110.65W CHG 1
xii Table of ContentsParagraph Page
5−14−9. ERAM COMPUTER ENTRY OF HOLD INFORMATION 5 −14−3 ...................
5−14−10. ERAM VISUAL INDICATOR OF SPECIAL ACTIVITY AIRSPACE (SAA)
STATUS 5 −14−3 .........................................................
Section 15. Common Automated Radar Terminal Systems (CARTS)
& Standard Terminal Automation Replacement System
(STARS) −Terminal
5−15−1. APPLICATION 5 −15−1 ......................................................
5−15−2. RESPONSIBILITY 5 −15−1 ...................................................
5−15−3. FUNCTIONAL USE 5 −15−1 ..................................................
5−15−4. SYSTEM REQUIREMENTS 5 −15−1 ...........................................
5−15−5. INFORMATION DISPLAYED 5 −15−1 ..........................................
5−15−6. CA/MCI 5 −15−2 ............................................................
5−15−7. INHIBITING MINIMUM SAFE ALTITUDE WARNING (MSAW) 5 −15−2 .............
5−15−8. TRACK SUSPEND FUNCTION 5 −15−2 ........................................
Chapter 6. Nonradar
Section 1. General
6−1−1. DISTANCE 6 −1−1 ..........................................................
6−1−2. NONRECEIPT OF POSITION REPORT 6 −1−1 ...................................
6−1−3. DUPLICATE POSITION REPORTS 6 −1−1 ......................................
6−1−4. ADJACENT AIRPORT OPERATION 6 −1−1 .....................................
6−1−5. ARRIVAL MINIMA 6 −1−1 ...................................................
Section 2. Initial Separation of Successive Departing Aircraft
6−2−1. MINIMA ON DIVERGING COURSES 6 −2−1 ....................................
6−2−2. MINIMA ON SAME COURSE 6 −2−3 ..........................................
Section 3. Initial Separation of Departing and Arriving Aircraft
6−3−1. SEPARATION MINIMA 6 −3−1 ................................................
Section 4. Longitudinal Separation
6−4−1. APPLICATION 6 −4−1 .......................................................
6−4−2. MINIMA ON SAME, CONVERGING, OR CROSSING COURSES 6 −4−1 .............
6−4−3. MINIMA ON OPPOSITE COURSES 6 −4−5 ......................................
6−4−4. SEPARATION BY PILOTS 6 −4−6 .............................................
6−4−5. RNAV AIRCRAFT ALONG VOR AIRWAYS/ROUTES 6 −4−6 ......................
Section 5. Lateral Separation
6−5−1. SEPARATION METHODS 6 −5−1 ..............................................
6−5−2. MINIMA ON DIVERGING RADIALS 6 −5−1 ....................................
6−5−3. DME ARC MINIMA 6 −5−2 ...................................................
6−5−4. MINIMA ALONG OTHER THAN ESTABLISHED AIRWAYS OR ROUTES 6 −5−2 .....
6−5−5. RNAV MINIMA − DIVERGING/CROSSING COURSES 6 −5−4 ......................
Section 6. Vertical Separation
6−6−1. APPLICATION 6 −6−1 .......................................................
JO 7110.65W CHG 1 05/26/16
xiii Table of ContentsParagraph Page
6−6−2. EXCEPTIONS 6 −6−1 ........................................................
6−6−3. SEPARATION BY PILOTS 6 −6−1 .............................................
Section 7. Timed Approaches
6−7−1. APPLICATION 6 −7−1 .......................................................
6−7−2. APPROACH SEQUENCE 6 −7−1 ..............................................
6−7−3. SEQUENCE INTERRUPTION 6 −7−2 ..........................................
6−7−4. LEVEL FLIGHT RESTRICTION 6 −7−2 ........................................
6−7−5. INTERVAL MINIMA 6 −7−2 ..................................................
6−7−6. TIME CHECK 6 −7−2 ........................................................
6−7−7. MISSED APPROACHES 6 −7−2 ...............................................
Chapter 7. Visual
Section 1. General
7−1−1. CLASS A AIRSPACE RESTRICTIONS 7 −1−1 ...................................
7−1−2. VFR CONDITIONS 7 −1−1 ...................................................
7−1−3. APPROACH CONTROL SERVICE FOR VFR ARRIVING AIRCRAFT 7 −1−1 .........
7−1−4. VISUAL HOLDING OF VFR AIRCRAFT 7 −1−1 .................................
Section 2. Visual Separation
7−2−1. VISUAL SEPARATION 7 −2−1 ................................................
Section 3. VFR-On-Top
7−3−1. VFR-ON-TOP 7 −3−1 ........................................................
7−3−2. ALTITUDE FOR DIRECTION OF FLIGHT 7 −3−2 ................................
Section 4. Approaches
7−4−1. VISUAL APPROACH 7 −4−1 ..................................................
7−4−2. VECTORS FOR VISUAL APPROACH 7 −4−1 ....................................
7−4−3. CLEARANCE FOR VISUAL APPROACH 7 −4−1 .................................
7−4−4. APPROACHES TO MULTIPLE RUNWAYS 7 −4−2 ...............................
7−4−5. CHARTED VISUAL FLIGHT PROCEDURES (CVFP). USA/USN NOT
APPLICABLE 7 −4−3 ....................................................
7−4−6. CONTACT APPROACH 7 −4−4 ................................................
Section 5. Special VFR (SVFR)
7−5−1. AUTHORIZATION 7 −5−1 ....................................................
7−5−2. PRIORITY 7 −5−1 ...........................................................
7−5−3. SEPARATION 7 −5−2 ........................................................
7−5−4. ALTITUDE ASSIGNMENT 7 −5−2 .............................................
7−5−5. LOCAL OPERATIONS 7 −5−3 .................................................
7−5−6. CLIMB TO VFR 7 −5−3 ......................................................
7−5−7. GROUND VISIBILITY BELOW ONE MILE 7 −5−3 ...............................
7−5−8. FLIGHT VISIBILITY BELOW ONE MILE 7 −5−4 ................................
Section 6. Basic Radar Service to VFR Aircraft− Terminal
7−6−1. APPLICATION 7 −6−1 .......................................................
05/26/16 JO 7110.65W CHG 1
xiv Table of ContentsParagraph Page
7−6−2. SERVICE AVAILABILITY 7 −6−1 .............................................
7−6−3. INITIAL CONTACT 7 −6−1 ...................................................
7−6−4. IDENTIFICATION 7 −6−1 ....................................................
7−6−5. HOLDING 7 −6−1 ...........................................................
7−6−6. APPROACH SEQUENCE 7 −6−1 ..............................................
7−6−7. SEQUENCING 7 −6−1 .......................................................
7−6−8. CONTROL TRANSFER 7 −6−2 ................................................
7−6−9. ABANDONED APPROACH 7 −6−2 ............................................
7−6−10. VFR DEPARTURE INFORMATION 7 −6−2 .....................................
7−6−11. TERMINATION OF SERVICE 7 −6−2 ..........................................
7−6−12. SERVICE PROVIDED WHEN TOWER IS INOPERATIVE 7 −6−3 ..................
Section 7. Terminal Radar Service Area (TRSA) − Terminal
7−7−1. APPLICATION 7 −7−1 .......................................................
7−7−2. ISSUANCE OF EFC 7 −7−1 ...................................................
7−7−3. SEPARATION 7 −7−1 ........................................................
7−7−4. HELICOPTER TRAFFIC 7 −7−1 ...............................................
7−7−5. ALTITUDE ASSIGNMENTS 7 −7−1 ............................................
7−7−6. APPROACH INTERVAL 7 −7−1 ...............................................
7−7−7. TRSA DEPARTURE INFORMATION 7 −7−1 .....................................
Section 8. Class C Service − Terminal
7−8−1. APPLICATION 7 −8−1 .......................................................
7−8−2. CLASS C SERVICES 7 −8−1 ..................................................
7−8−3. SEPARATION 7 −8−1 ........................................................
7−8−4. ESTABLISHING TWO-WAY COMMUNICATIONS 7 −8−1 .........................
7−8−5. ALTITUDE ASSIGNMENTS 7 −8−2 ............................................
7−8−6. EXCEPTIONS 7 −8−2 ........................................................
7−8−7. ADJACENT AIRPORT OPERATIONS 7 −8−2 ....................................
7−8−8. TERMINATION OF SERVICE 7 −8−2 ...........................................
Section 9. Class B Service Area − Terminal
7−9−1. APPLICATION 7 −9−1 .......................................................
7−9−2. VFR AIRCRAFT IN CLASS B AIRSPACE 7 −9−1 .................................
7−9−3. METHODS 7 −9−1 ..........................................................
7−9−4. SEPARATION 7 −9−2 ........................................................
7−9−5. TRAFFIC ADVISORIES 7 −9−2 ...............................................
7−9−6. HELICOPTER TRAFFIC 7 −9−2 ...............................................
7−9−7. ALTITUDE ASSIGNMENTS 7 −9−2 ............................................
7−9−8. APPROACH INTERVAL 7 −9−2 ...............................................
Chapter 8. Offshore/Oceanic Procedures
Section 1. General
8−1−1. ATC SERVICE 8 −1−1 .......................................................
8−1−2. OPERATIONS IN OFFSHORE AIRSPACE AREAS 8 −1−1 .........................
8−1−3. VFR FLIGHT PLANS 8 −1−1 ..................................................
8−1−4. TYPES OF SEPARATION 8 −1−1 ..............................................
JO 7110.65W CHG 1 05/26/16
xv Table of ContentsParagraph Page
8−1−5. ALTIMETER SETTING 8 −1−1 ................................................
8−1−6. RECEIPT OF POSITION REPORTS 8 −1−1 ......................................
8−1−7. OCEANIC ERROR REPORT PROCEDURES 8 −1−1 ..............................
8−1−8. USE OF CONTROL ESTIMATES 8 −1−1 ........................................
8−1−9. RVSM OPERATIONS 8 −1−1 ..................................................
Section 2. Coordination
8−2−1. GENERAL 8 −2−1 ...........................................................
8−2−2. TRANSFER OF CONTROL AND COMMUNICATIONS 8 −2−1 .....................
8−2−3. AIR TRAFFIC SERVICES INTERFACILITY DATA COMMUNICATIONS (AIDC) 8 −2−1
Section 3. Longitudinal Separation
8−3−1. APPLICATION 8 −3−1 .......................................................
8−3−2. SEPARATION METHODS 8 −3−1 ..............................................
8−3−3. MACH NUMBER TECHNIQUE 8 −3−2 .........................................
Section 4. Lateral Separation
8−4−1. APPLICATION 8 −4−1 .......................................................
8−4−2. SEPARATION METHODS 8 −4−1 ..............................................
8−4−3. REDUCTION OF ROUTE PROTECTED AIRSPACE 8 −4−3 ........................
8−4−4. TRACK SEPARATION 8 −4−4 .................................................
Section 5. Offshore/Oceanic Transition Procedures
8−5−1. ALTITUDE/FLIGHT LEVEL TRANSITION 8 −5−1 ...............................
8−5−2. COURSE DIVERGENCE 8 −5−1 ...............................................
8−5−3. OPPOSITE DIRECTION 8 −5−1 ...............................................
8−5−4. SAME DIRECTION 8 −5−2 ...................................................
8−5−5. RADAR IDENTIFICATION APPLICATION 8 −5−2 ...............................
Section 6. Separation from Airspace Reservations
8−6−1. TEMPORARY STATIONARY AIRSPACE RESERVATIONS 8 −6−1 ..................
8−6−2. REFUSAL OF AVOIDANCE CLEARANCE 8 −6−1 ...............................
8−6−3. TEMPORARY MOVING AIRSPACE RESERVATIONS 8 −6−1 ......................
Section 7. North Atlantic ICAO Region
8−7−1. APPLICATION 8 −7−1 .......................................................
8−7−2. VERTICAL SEPARATION 8 −7−1 ..............................................
8−7−3. LONGITUDINAL SEPARATION 8 −7−1 ........................................
8−7−4. LATERAL SEPARATION 8 −7−2 ...............................................
8−7−5. PROCEDURES FOR WEATHER DEVIATIONS IN NORTH ATLANTIC (NAT)
AIRSPACE 8 −7−3 .......................................................
Section 8. Caribbean ICAO Region
8−8−1. APPLICATION 8 −8−1 .......................................................
8−8−2. VERTICAL SEPARATION 8 −8−1 ..............................................
8−8−3. LONGITUDINAL SEPARATION 8 −8−1 ........................................
8−8−4. LATERAL SEPARATION 8 −8−2 ...............................................
8−8−5. VFR CLIMB AND DESCENT 8 −8−3 ...........................................
05/26/16 JO 7110.65W CHG 1
xvi Table of ContentsSection 9. Pacific ICAO Region
Paragraph Page
8−9−1. APPLICATION 8 −9−1 .......................................................
8−9−2. VERTICAL SEPARATION 8 −9−1 ..............................................
8−9−3. LONGITUDINAL SEPARATION 8 −9−1 ........................................
8−9−4. LATERAL SEPARATION 8 −9−2 ...............................................
8−9−5. COMPOSITE SEPARATION MINIMA 8 −9−3 ....................................
8−9−6. COMPOSITE SEPARATION ALTITUDE ASSIGNMENT 8 −9−3 .....................
8−9−7. COMPOSITE SEPARATION APPLICATION 8 −9−3 ...............................
8−9−8. PROCEDURES FOR WEATHER DEVIATIONS AND OTHER CONTINGENCIES
IN OCEANIC CONTROLLED AIRSPACE 8 −9−4 .............................
Section 10. North American ICAO Region
8−10−1. APPLICATION 8 −10−1 ......................................................
8−10−2. VERTICAL SEPARATION 8 −10−1 .............................................
8−10−3. LONGITUDINAL SEPARATION 8 −10−1 .......................................
8−10−4. LATERAL SEPARATION 8 −10−2 ..............................................
Chapter 9. Special Flights
Section 1. General
9−1−1. GENERAL 9 −1−1 ...........................................................
9−1−2. SPECIAL HANDLING 9 −1−1 .................................................
9−1−3. FLIGHT CHECK AIRCRAFT 9 −1−1 ...........................................
Section 2. Special Operations
9−2−1. AIRCRAFT CARRYING DANGEROUS MATERIALS 9 −2−1 .......................
9−2−2. CELESTIAL NAVIGATION TRAINING 9 −2−1 ..................................
9−2−3. DEPARTMENT OF ENERGY (DOE) SPECIAL FLIGHTS 9 −2−1 ....................
9−2−4. EXPERIMENTAL AIRCRAFT OPERATIONS 9 −2−2 ..............................
9−2−5. FAA RESEARCH AND DEVELOPMENT FLIGHTS 9 −2−2 ........................
9−2−6. FLYNET 9−2−2 ............................................................
9−2−7. IFR MILITARY TRAINING ROUTES 9 −2−2 ....................................
9−2−8. INTERCEPTOR OPERATIONS 9 −2−4 ..........................................
9−2−9. SPECIAL INTEREST SITES 9 −2−4 ............................................
9−2−10. WASHINGTON, DC, SPECIAL FLIGHT RULES AREA (DC SFRA)/ATC
SECURITY SERVICES 9 −2−4 .............................................
9−2−11. SECURITY NOTICE (SECNOT) 9 −2−5 ........................................
9−2−12. LAW ENFORCEMENT OPERATIONS BY CIVIL AND MILITARY
ORGANIZATIONS 9 −2−5 .................................................
9−2−13. MILITARY AERIAL REFUELING 9 −2−6 ......................................
9−2−14. MILITARY OPERATIONS ABOVE FL 600 9 −2−7 ...............................
9−2−15. MILITARY SPECIAL USE FREQUENCIES 9 −2−8 ..............................
9−2−16. AVOIDANCE OF AREAS OF NUCLEAR RADIATION 9 −2−8 .....................
9−2−17. SAMP 9−2−8 ..............................................................
9−2−18. AWACS/NORAD SPECIAL FLIGHTS 9 −2−9 ...................................
9−2−19. WEATHER RECONNAISSANCE FLIGHTS 9 −2−9 ..............................
9−2−20. EVASIVE ACTION MANEUVER 9 −2−9 .......................................
9−2−21. NONSTANDARD FORMATION/CELL OPERATIONS 9 −2−10 ......................
9−2−22. OPEN SKIES TREATY AIRCRAFT 9 −2−10 .....................................
JO 7110.65W CHG 1 05/26/16
xvii Table of ContentsSection 3. Special Use, ATC −Assigned Airspace, and Stationary
ALTRVs
Paragraph Page
9−3−1. APPLICATION 9 −3−1 .......................................................
9−3−2. SEPARATION MINIMA 9 −3−1 ................................................
9−3−3. VFR-ON-TOP 9 −3−1 ........................................................
9−3−4. TRANSITING ACTIVE SUA/ATCAA 9 −3−2 ....................................
Section 4. Fuel Dumping
9−4−1. INFORMATION REQUIREMENTS 9 −4−1 ......................................
9−4−2. ROUTING 9 −4−1 ...........................................................
9−4−3. ALTITUDE ASSIGNMENT 9 −4−1 .............................................
9−4−4. SEPARATION MINIMA 9 −4−1 ................................................
9−4−5. INFORMATION DISSEMINATION 9 −4−1 ......................................
Section 5. Jettisoning of External Stores
9−5−1. JETTISONING OF EXTERNAL STORES 9 −5−1 .................................
Section 6. Unmanned Free Balloons
9−6−1. APPLICATION 9 −6−1 .......................................................
9−6−2. DERELICT BALLOONS 9 −6−2 ...............................................
Section 7. Parachute Operations
9−7−1. COORDINATION 9 −7−1 .....................................................
9−7−2. CLASS A, CLASS B, AND CLASS C AIRSPACE 9 −7−1 ...........................
9−7−3. CLASS D AIRSPACE 9 −7−1 ..................................................
9−7−4. OTHER CONTROL AIRSPACE 9 −7−1 .........................................
Section 8. Unidentified Flying Object (UFO) Reports
9−8−1. GENERAL 9 −8−1 ...........................................................
Chapter 10. Emergencies
Section 1. General
10−1−1. EMERGENCY DETERMINATIONS 10 −1−1 .....................................
10−1−2. OBTAINING INFORMATION 10 −1−1 ..........................................
10−1−3. PROVIDING ASSISTANCE 10 −1−1 ............................................
10−1−4. RESPONSIBILITY 10 −1−1 ...................................................
10−1−5. COORDINATION 10 −1−2 ....................................................
10−1−6. AIRPORT GROUND EMERGENCY 10 −1−2 .....................................
10−1−7. INFLIGHT EMERGENCIES INVOLVING MILITARY FIGHTER-TYPE
AIRCRAFT 10 −1−2 .......................................................
Section 2. Emergency Assistance
10−2−1. INFORMATION REQUIREMENTS 10 −2−1 .....................................
10−2−2. FREQUENCY CHANGES 10 −2−1 .............................................
10−2−3. AIRCRAFT ORIENTATION 10 −2−1 ...........................................
10−2−4. ALTITUDE CHANGE FOR IMPROVED RECEPTION 10 −2−1 ......................
05/26/16 JO 7110.65W CHG 1
xviii Table of ContentsParagraph Page
10−2−5. EMERGENCY SITUATIONS 10 −2−1 ..........................................
10−2−6. HIJACKED AIRCRAFT 10 −2−2 ...............................................
10−2−7. VFR AIRCRAFT IN WEATHER DIFFICULTY 10 −2−2 ............................
10−2−8. RADAR ASSISTANCE TO VFR AIRCRAFT IN WEATHER DIFFICULTY 10 −2−2 .....
10−2−9. RADAR ASSISTANCE TECHNIQUES 10 −2−3 ..................................
10−2−10. EMERGENCY LOCATOR TRANSMITTER (ELT) SIGNALS 10 −2−3 ...............
10−2−11. AIRCRAFT BOMB THREATS 10 −2−4 ........................................
10−2−12. EXPLOSIVE DETECTION K −9 TEAMS 10 −2−5 ................................
10−2−13. MANPADS ALERT 10 −2−5 ..................................................
10−2−14. UNAUTHORIZED LASER ILLUMINATION OF AIRCRAFT 10 −2−5 ...............
10−2−15. EMERGENCY AIRPORT RECOMMENDATION 10 −2−6 .........................
10−2−16. GUIDANCE TO EMERGENCY AIRPORT 10 −2−6 ...............................
10−2−17. EMERGENCY OBSTRUCTION VIDEO MAP (EOVM) 10 −2−6 ....................
10−2−18. VOLCANIC ASH 10 −2−6 ...................................................
10−2−19. REPORTING DEATH, ILLNESS, OR OTHER PUBLIC HEALTH RISK ON
BOARD AIRCRAFT 10 −2−7 ...............................................
Section 3. Overdue Aircraft
10−3−1. OVERDUE AIRCRAFT/OTHER SITUATIONS 10 −3−1 ............................
10−3−2. INFORMATION TO BE FORWARDED TO ARTCC 10 −3−1 ........................
10−3−3. INFORMATION TO BE FORWARDED TO RCC 10 −3−1 ...........................
10−3−4. ALNOT 10−3−2 ............................................................
10−3−5. RESPONSIBILITY TRANSFER TO RCC 10 −3−2 .................................
10−3−6. LAST KNOWN POSITION DETERMINATION 10 −3−3 ...........................
10−3−7. ALNOT CANCELLATION 10 −3−3 ............................................
Section 4. Control Actions
10−4−1. TRAFFIC RESTRICTIONS 10 −4−1 ............................................
10−4−2. LIGHTING REQUIREMENTS 10 −4−1 .........................................
10−4−3. TRAFFIC RESUMPTION 10 −4−1 .............................................
10−4−4. COMMUNICATIONS FAILURE 10 −4−1 ........................................
Section 5. Miscellaneous Operations
10−5−1. EXPLOSIVE CARGO 10 −5−1 .................................................
Section 6. Oceanic Emergency Procedures
10−6−1. APPLICATION 10 −6−1 ......................................................
10−6−2. PHASES OF EMERGENCY 10 −6−1 ............................................
10−6−3. ALERTING SERVICE AND SPECIAL ASSISTANCE 10 −6−1 ......................
10−6−4. INFLIGHT CONTINGENCIES 10 −6−2 .........................................
10−6−5. SERVICES TO RESCUE AIRCRAFT 10 −6−3 ....................................
Section 7. Ground Missile Emergencies
10−7−1. INFORMATION RELAY 10 −7−1 ..............................................
10−7−2. IFR AND SVFR MINIMA 10 −7−1 .............................................
10−7−3. VFR MINIMA 10 −7−1 .......................................................
10−7−4. SMOKE COLUMN AVOIDANCE 10 −7−1 .......................................
10−7−5. EXTENDED NOTIFICATION 10 −7−1 ..........................................
Chapter 11. Traffic Management Procedures
Section 1. General
11−1−1. DUTY RESPONSIBILITY 11 −1−1 .............................................
JO 7110.65W CHG 1 05/26/16
xix Table of ContentsParagraph Page
11−1−2. DUTIES AND RESPONSIBILITIES 11 −1−1 .....................................
11−1−3. TIME BASED FLOW MANAGEMENT (TBFM) 11 −1−2 ...........................
Chapter 12. Canadian Airspace Procedures
Section 1. General Control
12−1−1. APPLICATION 12 −1−1 ......................................................
12−1−2. AIRSPACE CLASSIFICATION 12 −1−1 .........................................
12−1−3. ONE THOUSAND −ON−TOP 12 −1−1 ...........................................
12−1−4. SEPARATION 12 −1−1 .......................................................
12−1−5. DEPARTURE CLEARANCE/COMMUNICATION FAILURE 12 −1−2 ................
12−1−6. PARACHUTE JUMPING 12 −1−2 ..............................................
12−1−7. SPECIAL VFR (SVFR) 12 −1−2 ................................................
Chapter 13. Decision Support Tools
Section 1. ERAM Decision Support Tools (EDST)
13−1−1. DESCRIPTION 13 −1−1 ......................................................
13−1−2. CONFLICT DETECTION AND RESOLUTION 13 −1−1 ............................
13−1−3. TRIAL PLANNING 13 −1−1 ..................................................
13−1−4. CONFLICT PROBE-BASED CLEARANCES 13 −1−1 .............................
13−1−5. THE AIRCRAFT LIST (ACL), DEPARTURE LIST (DL) AND FLIGHT DATA
MANAGEMENT 13 −1−1 ..................................................
13−1−6. MANUAL COORDINATION AND THE COORDINATION MENU 13 −1−2 ............
13−1−7. HOLDING 13 −1−2 ..........................................................
13−1−8. RECORDING OF CONTROL DATA 13 −1−2 .....................................
13−1−9. ACKNOWLEDGEMENT OF AUTOMA TED NOTIFICATION 13 −1−5 ...............
13−1−10. CURRENCY OF TRAJECTORY INFORMATION 13 −1−5 .........................
13−1−11. DELAY REPORTING 13 −1−5 ................................................
13−1−12. OVERDUE AIRCRAFT 13 −1−5 ..............................................
13−1−13. USE OF GRAPHICS PLAN DISPLAY (GPD) 13 −1−6 .............................
13−1−14. FORECAST WINDS 13 −1−6 .................................................
13−1−15. INTERFACILITY CONNECTIVITY 13 −1−6 ....................................
13−1−16. SURVEILLANCE AND FLIGHT DATA OUTAGES 13 −1−6 .......................
13−1−17. AIRSPACE CONFIGURATION ELEMENTS 13 −1−6 .............................
Section 2. Ocean21 − Oceanic
13−2−1. DESCRIPTION 13 −2−1 ......................................................
13−2−2. CONFLICT DETECTION AND RESOLUTION 13 −2−1 ............................
13−2−3. INFORMATION MANAGEMENT 13 −2−2 ......................................
13−2−4. CONTROLLER PILOT DATA LINK COMMUNICATIONS (CPDLC) 13 −2−3 ..........
13−2−5. COORDINATION 13 −2−4 ....................................................
13−2−6. TEAM RESPONSIBILITIES − MULTIPLE PERSON OPERATION 13 −2−4 ............
05/26/16 JO 7110.65W CHG 1
xx Table of ContentsAppendices
Appendix A. Standard Operating Practice (SOP) for the Transfer of Position Responsibility Appendix A −1
PILOT/CONTROLLER GLOSSARY PCG −1 ............................................
JO 7110.65W 12/10/15
1−1−1 IntroductionChapter 1. General
Section 1. Introduction
1−1−1. PURPOSE OF THIS ORDER
This order prescribes air traffic control procedures
and phraseology for use by persons providing
air traffic control services. Controllers are required to
be familiar with the provisions of this order that
pertain to their operational responsibilities and to
exercise their best judgment if they encountersituations that are not covered by it.
1−1−2. AUDIENCE
This order applies to all ATO personnel and anyone
using ATO directives.
1−1−3. WHERE TO FIND THIS ORDER
This order is available on the FAA Web site at
http://www.faa.gov/regulations_policies/orders_notices.
1−1−4. WHAT THIS ORDER CANCELS
FAA Order JO 7110.65V , Air Traffic Control, dated
April 3, 2014, and all changes to it are canceled.
1−1−5. EXPLANATION OF CHANGES
The significant changes to this order are identified in
the Explanation of Changes page(s). It is advisable toretain the page(s) throughout the duration of the basic
order.
1−1−6. SUBMISSION CUTOFF AND
EFFECTIVE DATES
This order and its changes are scheduled to be
published to coincide with AIRAC dates.
(See TBL 1 −1−1.)TBL 1−1−1
Publication Schedule
Basic or
ChangeCutoff Date for
SubmissionEffective Dateof Publication
JO 7110.65W 6/25/15 12/10/15
Change 1 12/10/15 5/26/16
Change 2 5/26/16 11/10/16
Change 3 11/10/16 4/27/17
JO 7110.65X 4/27/17 10/12/17
1−1−7. DELIVERY DATES
a.If an FAA facility has not received the
order/changes at least 30 days before the above
effective dates, the facility must notify its service area
office distribution officer.
b.If a military facility has not received the
order/changes at least 30 days before the above
effective dates, the facility must notify its appropriate
military headquarters. (See TBL 1 −1−2.)
TBL 1−1−2
Military Distribution Contacts
Military
HeadquartersDSN Commercial
U.S. ArmyUSAASA 656−4868 (703) 806 −4868
U.S. Air Force
HQ AFFSA884-5509 (405) 734-5509
U.S. Navy
CNO (N980A)224−2638 (703) 614 −2638
1−1−8. RECOMMENDATIONS FOR
PROCEDURAL CHANGES
The office of primary responsibility (OPR) for this
order is:
FAA Headquarters, Mission Support Services
Air Traffic Procedures (AJV-8)
600 Independence Avenue, SW
Washington, DC 20597
a.Personnel should submit recommended
changes in procedures to facility management.
JO 7110.65W 12/10/15
1−1−2 Introductionb.Recommendations from other sources should
be submitted through appropriate FAA, military, or
industry/user channels.
c.Proposed changes must be submitted,
electronically, to the Air Traffic Procedures
Correspondence Mailbox at9−AJV−8−HQ−Correspondence@faa.gov. The
submission should include a description of the
recommended change, and the proposed language to
be used in the order.
d.Procedural changes will not be made to this
order until the operational system software has beenadapted to accomplish the revised procedures
1−1−9. REQUESTS FOR INTERPRETA-
TIONS OR CLARIFICATIONS TO THIS
ORDER
a.Interpretation requests from field air traffic
personnel must be submitted as follows:
1.The request must be submitted, in writing, by
an Air Traffic Facility/District manager to their
Service Area Director.
2.The Service Area Director must review the
request and determine if more than one interpretation
on the intent of the language can be inferred.
3.If it is determined that an interpretation is
required, the Service Area Director must submit the
request, in writing, to the Air Traffic Procedures
Directorate, for a response.
b.If a request does not require an interpretation
but further clarification is needed it must be
forwarded to the Service Center Operations Support
Group for a response.
1.The Service Center Operations Support
Group may consult with the Air Traffic Procedures
Directorate when preparing their response.
2.The Service Center Operations Support
Group must provide a written response to therequestor and forward the response to the Air Traffic
Procedures Directorate.
c.Interpretation requests from all other sources
must be submitted, in writing, to the Air Traffic
Procedures Directorate through the Air Traffic
Procedures correspondence mailbox.
NOTE−
Interpretations can be accessed through the Air
Traffic Control Interpretation link at the following
website: https://my.faa.gov/org/linebusiness/ato/
mission_support/air_traffic_procedures.html.
1−1−10. PROCEDURAL LETTERS OF
AGREEMENT
Procedures/minima which are applied jointly or
otherwise require the cooperation or concurrence of
more than one facility/organization must be docu-
mented in a letter of agreement. Letters of agreement
only supplement this order. Any minima they specify
must not be less than that specified herein unless
appropriate military authority has authorized applica-
tion of reduced separation between military aircraft.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−1 , ATC Service.
FAAO JO 7210.3, Para 4 −3−1, Letters of Agreement.
1−1−11. CONSTRAINTS GOVERNING
SUPPLEMENTS AND PROCEDURAL
DEVIATIONS
a.Exceptional or unusual requirements may
dictate procedural deviations or supplementary
procedures to this order. Prior to implementing
supplemental or any procedural deviation that altersthe level, quality, or degree of service, obtain prior
approval from the Vice President, Mission Support
Services.
b.If military operations or facilities are involved,
prior approval by the following appropriate
headquarters is required for subsequent interface with
FAA. (See TBL 1 −1−3.)3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
1−1−3 IntroductionTBL 1−1−3
Military Operations Interface Offices
Branch Address
U.S. Navy Department of the Navy
Chief of Naval Operations
N980A, NAATSEA
2000 Navy Pentagon (5D453)Washington, D.C. 20350 −2000
U.S. Air Force HQ AFFSA/Airfield Operations
Bldg 4 Room 240
6500 S. MacArthur Blvd
Oklahoma City, OK 73169Email: hqaffsa.xa@us.af.mil
U.S. Army DirectorUSAASA (MOAS −AS)
9325 Gunston Road, Suite N319
Ft. Belvoir, V A 22060 −5582
NOTE−
Terminal: Headquarters Air Force Flight Standards
Agency is the appr oval authority for any USAF pr ocedures
or minima that differ from those specified herein and that
involve military aircraft only.
REFERENCE −
FAAO JO 7110.65, Para 2 −1−12, Military Pr ocedures
F AAO JO 7110.65, Para 3 −1−3 , Use of Active Runways.
1−1−12. SAFETY MANAGEMENT SYSTEM
(SMS)
Every employee is responsible to ensure the safety of
equipment and procedures used in the provision ofservices within the National Airspace System (NAS).Risk assessment techniques and mitigations, as
appropriate, are intended for implementation of any
planned safety significant changes within the NAS, as
directed by FAA Order 1100.161, Air Traffic Safety
Oversight. Direction regarding the SMS and itsapplication can be found in the FAA Safety
Management System Manual and FAA
Order 1100.161. The SMS will be implementedthrough a period of transitional activities. (Additional
information pertaining to these requirements and
processes can be obtained by contacting the servicearea offices.)
1−1−13. REFERENCES TO FAA NON −AIR
TRAFFIC ORGANIZATIONS
When references are made to regional office
organizations that are not part of the Air Traffic
Organization (i.e., Communications Center, Flight
Standards, Airport offices, etc.), the facility should
contact the FAA region where the facility is
physically located − not the region where the
facility’s service area office is located.
1−1−14. DISTRIBUTION
This order is distributed to selected offices in
Washington headquarters, regional offices, service
area of fices, the William J. Hughes T echnical Center,
and the Mike Monroney Aeronautical Center. Also,
copies are sent to all air traffic field facilities and
international aviation field offices; and to interestedaviation public.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
1−2−1 Terms of ReferenceSection 2. Terms of Reference
1−2−1. WORD MEANINGS
As used in this order:
a.“Shall” or “must” means a procedure is
mandatory.
b.“Shall not” or “must not” means a procedure is
prohibited.
c.“Should” means a procedure is recommended.
d.“May” or “need not” means a procedure is
optional.
e.“Will” means futurity, not a requirement for the
application of a procedure.
f.Singular words include the plural.
g.Plural words include the singular.
h.“Aircraft” means the airframe, crew members,
or both.
i.“Approved separation” means separation in
accordance with the applicable minima in this order.
j.“Altitude” means indicated altitude mean sea
level (MSL), flight level (FL), or both.
k.“Miles” means nautical miles unless otherwise
specified, and means stat ute miles in conjunction
with visibility.
l.“Course,” “bearing,” “azimuth,” “heading,” and
“wind direction” information must always be
magnetic unless specifically stated otherwise.
m.“Time” when used for ATC operational
activities, is the hour and the minute in Coordinated
Universal Time (UTC). Change to the next minute is
made at the minute plus 30 seconds, except time
checks are given to the nearest quarter minute.
n.“Runway” means the runway used by aircraft
and, unless otherwise specified, does not include
helipads and/or their accompanying takeoff/landing
courses. (See Pilot/Controller Glossary terms –Runway and Helipad.)o.Flight operations in accordance with the options
of “due regard” or “operational” obligates the
authorized state aircraft commander to:
1.Separate his/her aircraft from all other
air traffic; and
2.Assure that an appropriate monitoring agency
assumes responsibility for search and rescue actions;
and
3.Operate under at least one of the following
conditions:
(a)In visual meteorological conditions
(VMC); or
(b)Wthin radar surveillance and radio
communications of a surface radar facility; or
(c)Be equipped with airborne radar that is
sufficient to provide separation between his/her
aircraft and any other aircraft he/she may be
controlling and other aircraft; or
(d)Operate within Class G airspace.
(e)An understanding between the pilot and
controller regarding the intent of the pilot and the
status of the flight should be arrived at before theaircraft leaves ATC frequency.
NOTE−
1.A pilot’ s use of the phrase “Going Tactical” does not
indicate “Due Regard.” An understanding between thepilot and controller r egarding the i ntent of the pilot and the
status of the flight should be arrived at before the aircraft
leaves air traffic control (ATC) frequency.
2.The above conditions provide for a level of safety
equivalent to that normally given by International Civil
Aviation Organization (ICAO) ATC agencies and fulfillsU.S. Government obligations under Article 3 of the
Chicago Convention of 1944 (Reference (d)), which
stipulates there must be “due regard for the safety ofnavigation of civil aircraft” when flight is not being
conducted under ICAO flight procedures.
p.“CFR” means Code of Federal Regulations.
JO 7110.65W 12/10/15
1−2−2 Terms of ReferenceFIG 1−2−1
Divergence
1−2−2. COURSE DEFINITIONS
The following definitions must be used in the
application of the separation criteria in this order.
NOTE−
The term “protected airspace,” as used in this paragraph,is the airspace equal to one half the required applicablelateral separation on either side of an aircraft along its
projected flight path. If the protected airspace of
two aircraft does not overlap, applicable lateral separa-tion is ensured.
a.SAME COURSES are courses whose protected
airspaces are coincident, overlap, or intersect andwhose angular difference is less than 45 degrees.
(See FIG 1−2−1.)b.CROSSING COURSES are intersecting courses
whose angular difference is 45 through 135 degrees
inclusive. (See FIG 1−2−1.)
c.OPPOSITE/RECIPROCAL COURSES are
courses whose protected airspaces are coincident,
overlap, or intersect and whose angular difference isgreater than 135 degrees through 180 degrees
inclusive. (See FIG 1−2−1.)
1−2−3. NOTES
Statements of fact, or of a prefatory or explanatory
nature relating to directive material, are set forth as
notes.
JO 7110.65W 12/10/15
1−2−3 Terms of Reference1−2−4. REFERENCES
As used in this order , references direct attention to an
additional or supporting source of information such
as FAA, NWS, and other agencies’ orders, directives,
notices, CFRs, and Advisory Circulars (ACs).
1−2−5. ANNOTATIONS
Revised, reprinted, or new pages are marked as
follows:
a.The change number and the effective date are
printed on each revised or additional page.
b.A page that does not require a change is
reprinted in its original form.
c.Bold vertical lines in the margin of changed
pages indicate the location of substantive revisions to
the order. Bold vertical lines adjacent to the title of a
chapter, section, or paragraph means that extensivechanges have been made to that chapter, section, or
paragraph.
d.Paragraphs/sections annotated with
EN ROUTE, OCEANIC, or TERMINAL are only to
be applied by the designated type facility. When they
are not so designated, the paragraphs/sections apply
to all types of facilities (en route, oceanic, andterminal).
e.The annotation, USAF for the U.S. Air Force,
USN for the U.S. Navy, and USA for the U.S. Army
denotes that the procedure immediately following the
annotation applies only to the designated service.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−12, Military Procedures.
f. WAKE TURBULENCE APPLICATION in-
serted within a paragraph means that the remaininginformation in the paragraph requires the application
of wake turbulence procedures.
g.The annotation
PHRASEOLOGY denotes the
prescribed words and/or phrases to be used incommunications.
NOTE−
Controllers may, after first using the prescribedphraseology for a specific procedure, rephrase the
message to ensure the content is understood. Good
judgment must be exercised when using nonstandardphraseology.h.The annotation EXAMPLE provides a sample of
the way the prescribed phraseology associated with
the preceding paragraph(s) will be used. If the
preceding paragraph(s) does (do) not include specific
prescribed phraseology, the EXAMPLE merely
denotes suggested words and/or phrases that may be
used in communications.
NOTE−
The use of the exact text contained in an example notpreceded with specific prescribed phraseology is notmandatory. However, the words and/or phrases are
expected, to the extent practical, to approximate those used
in the example.
1−2−6. ABBREVIATIONS
As used in this manual, the following abbreviations
have the meanings indicated. (See TBL 1 −2−1.)
TBL 1−2−1
FAA Order JO 7110.65 Abbreviations
Abbreviation Meaning
A A R ....... Airport acceptance rate
A C ........ Advisory Circular
A C C ....... Area Control Center
A C D ....... ARTS Color Display
ACE−IDS . . . ASOS Controller Equipment − Information
Display System
A C L ....... Aircraft list
ACLS ...... Automatic Carrier Landing System
A D C ....... Aerospace Defense Command
ADIZ ...... Air Defense Identification Zone (to be
pronounced “AY DIZ”)
A D S ....... Automatic Dependent Surveillance
ADS−B..... Automatic Dependent Surveillance
Broadcast
ADS−C..... Automatic Dependent Surveillance
Contract
A E R T ...... Automation Embedded Route Text
A F P ....... Airspace Flow Program
AIDC ...... ATS Interfacility Data Communications
A I M ....... Aeronautical Information Manual
AIRMET . . . Airmen’s meteorological information
ALERFA . . . Alert phase code (Alerting Service)
ALNOT .... Alert notice
A L S ....... Approach Light System
A L T R V..... Altitude reservation
AMASS .... Airport Movement Area Safety System
JO 7110.65W 12/10/15
1−2−4 Terms of ReferenceAbbreviation Meaning
A M B ...... Ambiguity −A disparity greater than 2 miles
exists between the position declared for a
target by ATTS and another facility’scomputer declared position duringinterfacility handoff
AMVER .... Automated Mutual Assistance Vessel
Rescue System
A N G....... Air National Guard
A P R ....... ATC preferred route
APREQ .... Approval Request
ARINC ..... Aeronautical Radio Incorporated
ARIP ...... Air refueling initial point
ARSR ...... Air route surveillance radar
A R T C C..... Air Route Traffic Control Center
A R T S ...... Automated Radar Terminal System
A S D ....... Aircraft Situation Display
ASDE ...... Airport surface detection equipment
ASDE−X ... Airport Surface Detection Equipment
System − Model X
A S F ....... Airport Stream Filters
ASOS ...... Automated Surface Observing System
A S R ....... Airport surveillance radar
A T C ....... Air traffic control
ATCAA .... ATC assigned airspace
ATCSCC .... David J. Hurley Air Traffic Control System
Command Center
A T D ....... Along−Track Distance
A T I S ....... Automatic Terminal Information Service
A T O ....... Air Traffic Organization
ATO COO . . Air Traffic Organization Chief Operating
Officer
A T S ....... Air Traffic Service
A W O S ..... Automated Weather Observing System
BAASS ..... Bigelow Aerospace Advanced Space
Studies
BASE ...... Cloud base
C A ........ Conflict Alert
CARCAH . . . Chief, Aerial Reconnaissance
Coordination, All Hurricanes
CARF ...... Central Altitude Reservation Function
C A R T S..... Common ARTS
C A T ....... Clear air turbulence
C D T ....... Controlled departure time
CENRAP . . . Center Radar ARTS Presentation
C E P ....... Central East Pacific
CERAP ..... Combined Center/RAPCONAbbreviation Meaning
C F R ....... Code of Federal Regulations
C F R ....... Call for Release
C I C........ Controller −in−Charge
C N S ....... Continuous
CPDLC ..... Controller Pilot Data Link
Communications
CPME ...... Calibration Performance Monitor
Equipment
C T A ....... Control Area
CTRD ...... Certified Tower Radar Display
CVFP ...... Charted Visual Flight Procedure
C W A....... Center Weather Advisory
DETRESFA . Distress Phase code (Alerting Service)
D H ........ Decision height
D L ........ Departure List
D M E....... Distance measuring equipment compatible
with TACAN
D O E ....... Department of Energy
D P ........ Instrument Departure Procedure
D R ........ Dead reckoning
D R T ....... Diversion recovery tool
D S R ....... Display System Replacement
D T A S ...... Digital Terminal Automation Systems
D T M....... Digital Terrain Map
DVFR ...... Defense Visual Flight Rules
DVRSN .... Diversion
E A ........ Electronic Attack
E A S ....... En Route Automation System
EBUS ...... Enhanced Backup Surveillance System
EDCT ...... Expect Departure Clearance Time
EDST ...... En Route Decision Support Tool
E F C ....... Expect further clearance
ELDB ...... Enhanced Limited Data Block
E L P ....... Emergency Landing Pattern
E L T........ Emergency locator transmitter
E O S ....... End Service
EOVM ..... Emergency obstruction video map
ERAM ..... En Route Automation Modernization
ERIDS ..... En Route Information Display System
E T A ....... Estimated time of arrival
F A A ....... Federal Aviation Administration
F A A O...... FAA Order
F A N S ...... Future Air Navigation System
JO 7110.65W 12/10/15
1−2−5 Terms of ReferenceAbbreviation Meaning
F D B ....... Full Data Block
FDIO ...... Flight Data Input/Output
F D P ....... Flight data processing
F I R ........ Flight Information Region
F L......... Flight level
FLIP ....... Flight Information Publication
F L M ....... Front−Line Manager
F L Y ....... Fly or flying
F M S ....... Flight Management System
FMSP ...... Flight Management System Procedure
F S M ....... Flight Schedule Monitor
F S S........ Flight Service Station
G C A ....... Ground controlled approach
GNSS ...... Global Navigation Satellite System
G P D ....... Graphics Plan Display
G P S ....... Global Positioning System
G S ........ Ground stop
H A R ....... High Altitude Redesign
HF/RO ..... High Frequency/Radio Operator
HIRL ...... High intensity runway lights
IAFDOF .... Inappropriate Altitude for Direction of
Flight
ICAO ...... International Civil Aviation Organization
IDENT ..... Aircraft identification
I D S ........ Information Display System
I F R ........ Instrument flight rules
IFSS ....... International Flight Service Station
I L S ........ Instrument Landing System
INCERFA . . . Uncertainty Phase code (Alerting Service)
INREQ ..... Information request
I N S ........ Inertial Navigation System
I R ......... IFR military training route
I R U........ Inertial Reference Unit
I S R ........ Increased Separation Required
ITWS ...... Integrated Terminal Weather System
J A T O ...... Jet assisted takeoff
LAHSO .... Land and Hold Short Operations
L O A ....... Letter of Agreement
L L W A S..... Low Level Wind Shear Alert System
LLWAS NE . Low Level Wind Shear Alert System
Network Expansion
LLWAS−RS . Low Level Wind Shear Alert System
Relocation/Sustainment
L L W S...... Low Level Wind Shear
L/MF ...... Low/medium frequencyAbbreviation Meaning
LORAN .... Long Range Navigation System
Mach ...... Mach number
MALS ..... Medium Intensity Approach Light System
MALSR .... Medium Approach Light System with
runway alignment indicator lights
M A P....... Missed approach point
MARSA .... Military authority assumes responsibility
for separation of aircraft
M C A ...... Minimum crossing altitude
M C I ....... Mode C Intruder
M D A ...... Minimum descent altitude
M D M ...... Main display monitor
M E A....... Minimum en route (IFR) altitude
MEARTS . . . Micro En Route Automated RadarTracking System
M E T A R .... Aviation Routine Weather Report
M I A ....... Minimum IFR altitude
M I A W S .... Medium Intensity Airport Weather System
MIRL ...... Medium intensity runway lights
MNPS ...... Minimum Navigation Performance
Specification
M N T....... Mach Number Technique
M O A ...... Military operations area
MOCA ..... Minimum obstruction clearance altitude
M R A ...... Minimum reception altitude
M S A W ..... Minimum Safe Altitude Warning
M S L ....... Mean sea level
M T I ....... Moving target indicator
M T R....... Military training route
M V A....... Minimum vectoring altitude
NADIN ..... National Airspace Data Interchange
Network
N A R ....... National Automation Request
N A S ....... National Airspace System
N A T ....... ICAO North Atlantic Region
NBCAP .... National Beacon Code Allocation Plan
N D B ....... Nondirectional radio beacon
NHOP ...... National Hurricane Operations Plan
N M ........ Nautical mile
NOAA ..... National Oceanic and Atmospheric
Administration
N O P A C .... North Pacific
NORAD .... North American Aerospace Defense
Command5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
1−2−6 Terms of ReferenceAbbreviation Meaning
N O S ....... National Ocean Service
N O T A M .... Notice to Airmen
NOWGT .... No weight. The weight class or
wake category has not been
determined
N R P ....... North American Route Program
N R R ....... Nonrestrictive Route
N R S ....... Navigation Reference System
N T Z ....... No transgression zone
N W S....... National Weather Service
NWSOP .... National Winter Storm Operations Plan
ODALS .... Omnidirectional Approach Lighting
System
O D P ....... Obstacle Departure Procedure
O I D ....... Operator Interface Device
O S ........ Operations Supervisor
O T R ....... Oceanic transition route
P A P I ....... Precision Approach Path Indicators
P A R ....... Precision approach radar
P A R ....... Preferred arrival route
PBCT ...... Proposed boundary crossing time
P/CG ....... Pilot/Controller Glossary
PDAR ...... Preferential departure arrival route
P D C ....... Pre−Departure Clearance
P D R ....... Preferential departure route
P P I ........ Plan position indicator
P T P........ Point−to−point
P V D ....... Plan view display
R A ........ Radar Associate
RAIL ...... Runway alignment indicator lights
RAPCON . . . Radar Approach Control Facility (USAF)
R A T C F ..... Radar Air Traffic Control Facility (USN)
R B S ....... Radar bomb scoring
R C C ....... Rescue Coordination Center
RCLS ...... Runway Centerline System
R C R ....... Runway condition reading
R E ........ Recent (used to qualify weather
phenomena such as rain, e.g. recent rain =
RERA)
REIL ....... Runway end identifier lights
R N A V...... Area navigation
R N P ....... Required Navigation Performance
R T Q C ...... Real−Time Quality Control
R V R ....... Runway visual rangeAbbreviation Meaning
R V S M...... Reduced Vertical Separation Minimum
R V V ....... Runway visibility value
S A A ....... Special Activity Airspace
S A R ....... Search and rescue
SATCOM . . . Satellite Communication
S D P ....... Surveillance Data Processing
SELCAL .... Selective Calling System
S F A........ Single frequency approach
S F O ....... Simulated flameout
S I D ........ Standard Instrument Departure
SIGMET .... Significant meteorological information
S P A........ Special Posting Area
SPECI ...... Nonroutine (Special) Aviation Weather
Report
S T A R ...... Standard terminal arrival
S T A R S ..... Standard Terminal AutomationReplacement System
STMC ...... Supervisory Traffic Management
Coordinator
STMCIC .... Supervisory Traffic Management
Coordinator −in−charge
S T O L ...... Short takeoff and landing
SURPIC .... Surface Picture
SVFR ...... Special Visual Flight Rules
T A A ....... Terminal arrival area
T A S ....... Terminal Automation Systems
TACAN .... TACAN UHF navigational aid
(omnidirectional course and distance
information)
T A W S...... Terrain Awareness Warning System
TCAS ...... Traffic Alert and Collision Avoidance
System
TCDD ...... Tower cab digital display
TDLS ...... Terminal Data Link System
T D W ...... Tower display workstation
TDWR ..... Terminal Doppler Weather Radar
TDZL ...... Touchdown Zone Light System
TFMS ...... Traffic Flow Management System
T M C....... Traffic Management Coordinator
T M U....... Traffic Management Unit
TRACON . . . Terminal Radar Approach Control
TRSA ...... Terminal radar service area
U F O ....... Unidentified flying object
U H F ....... Ultra high frequency3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
1−2−7 Terms of ReferenceAbbreviation Meaning
U S A ....... United States Army
USAF ...... United States Air Force
U S N ....... United States Navy
U T C ....... Coordinated universal time
U T M....... Unsuccessful transmission message
U U A....... Urgent pilot weather report
V F R ....... Visual flight rules
V H F ....... Very high frequency
V M C ...... Visual meteorological conditions
V N A V...... Vertical Navigation
V O R ....... VHF navigational aid (omnidirectional
course information)
VOR/DME . . Collocated VOR and DME navigationalaids (VHF course and UHF distance
information)
VORTAC . . . Collocated VOR and TACAN navigation
aids (VHF and UHF course and UHF
distance information)
V R ........ VFR military training route
VSCS ...... V oice Switching and Control System
W A A S ..... Wide Area Augmentation System
W A R P ..... Weather and Radar Processing
W A T R S..... West Atlantic Route System
WSO ...... Weather Service Office
W S P ....... Weather System Processor
W S T ....... Convective SIGMET5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−1−1 GeneralChapter 2. General Control
Section 1. General
2−1−1. ATC SERVICE
The primary purpose of the A TC system is to prevent
a collision between aircraft operating in the systemand to provide a safe, orderly and expeditious
flow of
traffic, and to provide support for National Security
and Homeland Defense. In addition to its primaryfunction, the ATC system has the capability to
provide, with certain limitations , additional services.
The ability to provide additional services is limited bymany factors, such as the volume of traf fic, frequency
congestion, quality of radar, controller workload,
higher priority duties, and the pure physical inability
to scan and detect those situations that fall in this
category. It is recognized that these services cannot be
provided in cases in which the provision of servicesis precluded by the above factors. Consistent with the
aforementioned conditions, controllers must provide
additional service procedures to the extent permitted
by higher priority duties and other circumstances.
The provision of additional services is not optional onthe part of the controller, but rather is required when
the work situation permits. Provide air traffic control
service in accordance with the procedures andminima in this order except when:
a.A deviation is necessary to conform with ICAO
Documents, National Rules of the Air, or specialagreements where the U.S. provides air traffic control
service in airspace outside the U.S. and its
possessions or:
NOTE−
Pilots are required to abide by CFRs or other applicableregulations regardless of the application of any procedure
or minima in this order.
b.Other procedures/minima are prescribed in a
letter of agreement, FAA directive, or a militarydocument, or:
NOTE−
These procedures may include altitude reservations,air refueling, fighter interceptor operations, law enforce-ment, etc.
REFERENCE −
F AAO JO 7110.65, Para 1 −1−9 Procedural Letters of Agreement.c.A deviation is necessary to assist an aircraft
when an emergency has been declared.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−6 Safety Alert.
F AAO JO 7110.65, Chapter 10 Emergencies.
F AAO JO 7110.65, Para 5 −1−8 Merging Target Procedures.
2−1−2. DUTY PRIORITY
a.Give first priority to separating aircraft and
issuing safety alerts as required in this order. Goodjudgment must be used in prioritizing all other
provisions of this order based on the requirements of
the situation at hand.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−6 Safety Alert.
NOTE−
Because there are many variables involved, it is virtuallyimpossible to develop a standard list of duty priorities that
would apply uniformly to every conceivable situation.
Each set of circumstances must be evaluated on its ownmerit, and when more than one action is required,controllers must exercise their best judgment based on the
facts and cir cumstances known to them. That action which
is most critical from a safety standpoint is performed first.
b.Provide support to national security and
homeland defense activities to include, but not belimited to, reporting of suspicious and/or unusual
aircraft/pilot activities.
REFERENCE −
F AAO JO 7610.4 Special Operations.
c.Provide additional services to the extent
possible, contingent only upon higher priority duties
and other factors including limitations of radar,
volume of traffic, frequency congestion, andworkload.
2−1−3. PROCEDURAL PREFERENCE
a.Use automation procedures in preference to
nonautomation procedures when workload, commu-
nications, and equipment capabilities permit.
b.Use radar separation in preference to nonradar
separation when it will be to an operational advantage
and workload, communications, and equipment
permit.
JO 7110.65W 12/10/15
2−1−2 Generalc.Use nonradar separation in preference to radar
separation when the situation dictates that an
operational advantage will be gained.
NOTE−
One situation may be where vertical separation wouldpreclude excessive vectoring.
2−1−4. OPERATIONAL PRIORITY
Provide air traffic control service to aircraft on a “first
come, first served” basis as circumstances permit,
except the following:
NOTE−
It is solely the pilot’ s prerogative to cancel an IFR flight
plan. However, a pilot’ s retention of an IFR flight plan does
not afford priority over VFR aircraft. For example, thisdoes not preclude the requirement for the pilot of anarriving IFR aircraft to adjust his/her flight path, as
necessary, to enter a traffic pattern in sequence with
arriving VFR aircraft.
a.An aircraft in distress has the right of way over
all other air traffic.
REFERENCE −
14 CFR Section 91.113(c).
b.Provide priority to civilian air ambulance
flights (call sign “MEDEV AC”). Use of the
MEDEV AC call sign indicates that operationalpriority is requested. When verbally requested,
provide priority to AIR EV AC, HOSP, and scheduled
air carrier/air taxi flights. Assist the pilots ofMEDEV AC, AIR EV AC, and HOSP aircraft to avoid
areas of significant weather and turbulent conditions.
When requested by a pilot, provide notifications to
expedite ground handling of patients, vital organs, or
urgently needed medical materials.
NOTE−
It is recognized that heavy traffic flow may affect thecontroller’ s ability to provide priority handling. However,without compromising safety, good judgment must be used
in each situation to facilitate the most expeditious
movement of a MEDEVAC aircraft.
c.Provide maximum assistance to SAR aircraft
performing a SAR mission.
REFERENCE −
F AAO JO 7110.65, Para 10 −1−3, Providing Assistance.
d.Expedite the movement of presidential aircraft
and entourage and any rescue support aircraft as well
as related control messages when traffic conditions
and communications facilities permit.NOTE−
As used herein the terms presidential aircraft andentourage include aircraft and entourage of the Pr esident,
Vice President, or other public figures when designated by
the White House.
REFERENCE −
F AAO JO 7110.65, Para 2 −4−20 Aircraft Identification.
F AAO JO 7110.65, Para 4 −3−2 Departure Clearances.
FAAO JO 7210.3, Para 5 −1−1 Advance Coor dination.
e.Provide special handling, as required to
expedite Flight Check aircraft.
NOTE−
It is recognized that unexpected wind conditions, weather,
or heavy traffic flows may affect controller’ s ability toprovide priority or special handling at the specific timerequested.
REFERENCE −
F AAO JO 7110.65, Para 9 −1−3, Flight Check Aircraft.
f.Expedite movement of NIGHT WA TCH aircraft
when NAOC (pronounced NA −YOCK) is indicated
in the remarks section of the flight plan or in
air/ground communications.
NOTE−
The term “NAOC” will not be a part of the call sign but maybe used when the aircraft is airborne to indicate a request
for special handling.
REFERENCE −
FAAO JO 7610.4, Para 12 −1−1 Applications.
g.Provide expeditious handling for any civil or
military aircraft using the code name “FLYNET.”
REFERENCE −
F AAO JO 7110.65, Para 9 −2−6 FLYNET.
F AAO JO 7610.4, Para 12 −4−1 “FLYNET” Flights, Nuclear
Emergency Teams.
h.Provide expeditious handling of aircraft using
the code name “Garden Plot” only when CARF
notifies you that such priority is authorized. Refer any
questions regarding flight procedures to CARF for
resolution.
NOTE−
Garden Plot flights require priority movement and arecoordinated by the military with CARF . State authority will
contact the Regional Administrator to arrange for priority
of National Guard troop movements within a particular
state.
i.Provide special handling for USAF aircraft
engaged in aerial sampling missions using the code
name “SAMP.”
REFERENCE −
F AAO JO 7110.65, Para 9 −2−17, SAMP .
F AAO JO 7210.3, Para 5 −3−4, Atmosphere Sampling For Nuclear
Contamination.
F AAO JO 7610.4, Para 12 −4−3, Atmospheric Sampling For Nuclear
Contamination.
JO 7110.65W 12/10/15
2−1−3 Generalj.Provide maximum assistance to expedite the
movement of interceptor aircraft on active air defense
missions until the unknown aircraft is identified.
k.Expedite movement of Special Air Mission
aircraft when SCOOT is indicated in the remarkssection of the flight plan or in air/ground
communications.
NOTE−
The term “SCOOT” will not be part of the call sign but may
be used when the aircraft is airborne to indicate a request
for special handling.
REFERENCE −
FAAO JO 7610.4, Para 12 −7−1, Applications.
l.When requested, provide priority handling to
TEAL and NOAA mission aircraft.
NOTE−
Priority handling may be requested by the pilot, or viatelephone from CARCAH or the 53rd Weather Reconnais-
sance Squadron (53WRS) operations center personnel, orin the remarks section of the flight plan.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−19, Weather Reconnaissance Flights.
m.IFR aircraft must have priority over SVFR
aircraft.
REFERENCE −
F AAO JO 7110.65, Chapter 7, Section 5, Special VFR (SVFR).
n.Providing priority and special handling to
expedite the movement of OPEN SKIES Treaty
observation and demonstration (F and D) flights.
NOTE−
An OPEN SKIES Treaty (F and D) aircraft has priority
over all “regular” air traffic. “Regular” is defined as allaircraft traffic other than:
1. Emergencies.
2. Aircraft directly involved in presidential movement.
3. Forces or activities in actual combat.
4. MEDEVAC, and active SAR missions.
5. AIR EVAC and HOSP aircraft that have requested
priority handling.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−22, OPEN SKIES Treaty Aircraft.
FAAO JO 7210.3, Para 5 −3−7, OPEN SKIES Tr eaty Aircraft Priority
Flight (F and D).
Treaty on OPEN SKIES, Treaty Document, 102 −37.
o.Aircraft operating under the North American
Route Program (NRP) and in airspace identified in
the High Altitude Redesign (HAR) program, are notsubject to route limiting restrictions (e.g., published
preferred IFR routes, letter of agreement require-
ments, standard operating procedures).REFERENCE −
F AAO JO 7110.65, Para 2 −3−2, En Route Data Entries.
F AAO JO 7110.65, Para 2 −2−15, North American Route Program
(NRP) Information.
F AAO JO 7110.65, Para 4 −2−5, Route or Altitude Amendments.
F AAO JO 7210.3, Chapter 17, Section 16, North American Route
Program.
p.If able, provide priority handling to diverted
flights. Priority handling may be requested via use of
“DVRSN” in the remarks section of the flight plan or
by the flight being placed on the Diversion Recovery
Tool (DRT).
REFERENCE −
FAAO JO 7210.3, Para 17 −4−5, Diversion Recovery.
2−1−5. EXPEDITIOUS COMPLIANCE
a.Use the word “immediately” only when
expeditious compliance is required to avoid an
imminent situation.
b.Use the word “expedite” only when prompt
compliance is required to avoid the development of
an imminent situation. If an “expedite” climb or
descent clearance is issued by ATC, and subsequently
the altitude to maintain is changed or restated without
an expedite instruction, the expedite instruction is
canceled.
c.In either case, if time permits, include the reason
for this action.
2−1−6. SAFETY ALERT
Issue a safety alert to an aircraft if you are aware the
aircraft is in a position/altitude that, in your judgment,
places it in unsafe proximity to terrain, obstructions,
or other aircraft. Once the pilot informs you action is
being taken to resolve the situation, you maydiscontinue the issuance of further alerts. Do not
assume that because someone else has responsibility
for the aircraft that the unsafe situation has beenobserved and the safety alert issued; inform the
appropriate controller.
NOTE−
1.The issuance of a safety alert is a first priority (see
para 2−1−2, Duty Priority) once the controller observes
and recognizes a situation of unsafe aircraft proximity to
terrain, obstacles, or other aircraft. Conditions, such asworkload, traffic volume, the quality/limitations of theradar system, and the available lead time to react arefactors in determining whether it is reasonable for the
controller to observe and r ecognize such situations. While
a controller cannot see immediately the development ofevery situation where a safety alert must be issued, the
JO 7110.65W 12/10/15
2−1−4 Generalcontroller must remain vigilant for such situations and
issue a safety alert when the situation is recognized.
2.Recognition of situations of unsafe proximity may r esult
from MSAW/E −MSAW, automatic altitude readouts,
Conflict/Mode C Intruder Alert, observations on a P AR
scope, or pilot reports.
3.Once the alert is issued, it is solely the pilot’ s
prerogative to determine what course of action, if any, will
be taken.
a.Terrain/Obstruction Alert. Immediately issue/
initiate an alert to an aircraft if you are aware the
aircraft is at an altitude that, in your judgment, places
it in unsafe proximity to terrain and/or obstructions.Issue the alert as follows:
PHRASEOLOGY −
LOW ALTITUDE ALERT (call sign),
CHECK YOUR ALTITUDE IMMEDIATELY.
and, if the aircraft is not yet on final approach,THE (as appropriate) MEA/MVA/MOCA/MIA IN YOUR
AREA IS (altitude),
REFERENCE −
P/CG T erm − Final Approach − IFR
b.Aircraft Conflict/Mode C Intruder Alert.
Immediately issue/initiate an alert to an aircraft if you
are aware of another aircraft at an altitude that you
believe places them in unsafe proximity. If feasible,
offer the pilot an alternate course of action. When analternate course of action is given, end the
transmission with the word “immediately.”
PHRASEOLOGY −
TRAFFIC ALERT (call sign) (position of air craft) ADVISE
YOU TURN LEFT/RIGHT (heading),
and/or
CLIMB/DESCEND (specific altitude if appropriate)
IMMEDIATELY.
EXAMPLE −
“Traffic Alert, Cessna Three Four Juliet, 12’o clock, 1 mile
advise you turn left immediately.”
or
“Traffic Alert, Cessna Three-Four Juliet, 12’o clock, 1
mile advise you turn left and climb immediately.”REFERENCE −
F AAO JO 7110.65, Para 5 −14−1, Conflict Alert (CA) and Mode C
Intruder (MCI) Alert.
F AAO JO 7110.65, Para 5 −14−2, En Route Minimum Safe Altitude
Warning (E −MSAW).
F AAO JO 7110.65, Para 5 −15−6, CA/MCI.
F AAO JO 7110.65, Para 5 −2−23, Altitude Filters.
F AAO JO 7110.65, Para 2-1-21, Traffic Advisories
2−1−7. INFLIGHT EQUIPMENT
MALFUNCTIONS
a.When a pilot reports an inflight equipment
malfunction, determine the nature and extent of any
special handling desired.
NOTE−
Inflight equipment malfunctions include partial or
complete failure of equipment, which may affect either
safety, separation standar ds, and/or the ability of the flight
to proceed under IFR, or in Reduced Vertical SeparationMinimum (RVSM) airspace, in the ATC system. Control-lers may expect reports from pilots regarding VOR,
TACAN, ADF , GPS, RVSM capability, or low frequency
navigation receivers, impairment of air −ground commu-
nications capability, or other equipment deemedappropriate by the pilot (e.g., airborne weather radar).Pilots should communicate the nature and extent of any
assistance desired from ATC.
b.Provide the maximum assistance possible
consistent with equipment, workload, and any special
handling requested.
c.Relay to other controllers or facilities who will
subsequently handle the aircraft, all pertinent details
concerning the aircraft and any special handling
required or being provided.
2−1−8. MINIMUM FUEL
If an aircraft declares a state of “minimum fuel,”
inform any facility to whom control jurisdiction istransferred of the minimum fuel problem and be alert
for any occurrence which might delay the aircraft
en route.
NOTE−
Use of the term “minimum fuel” indicates recognition bya pilot that his/her fuel supply has reached a state where,upon r eaching destination, he/she cannot accept any undue
delay. This is not an emergency situation but merely an
advisory that indicates an emergency situation is possible
should any undue delay occur. A minimum fuel advisorydoes not imply a need for traffic priority. Common senseand good judgment will determine the extent of assistanceto be given in minimum fuel situations. If, at any time, the
JO 7110.65W 12/10/15
2−1−5 Generalremaining usable fuel supply suggests the need for traffic
priority to ensure a safe landing, the pilot should declarean emergency and report fuel remaining in minutes.
2−1−9. REPORTING ESSENTIAL FLIGHT
INFORMATION
Report as soon as possible to the appropriate FSS,
airport manager’s office, ARTCC, approach control
facility, operations office, or military operationsoffice any information concerning components of the
NAS or any flight conditions which may have an
adverse effect on air safety.
NOTE−
FSSs are responsible for classifying and disseminatingNotices to Airmen.
REFERENCE −
F AAO JO 7110.65, Para 3 −3−3, Timely Information.
F AAO JO 7110.65, Para 5 −1−6, Service Limitations.
FAAO JO 7210.3, Para 3 −1−2, Periodic Maintenance.
USN, See OPNAVINST 3721.30.
2−1−10. NAVAID MALFUNCTIONS
a.When an aircraft reports a ground −based
NA V AID malfunction, take the following actions:
1.Request a report from a second aircraft.
2.If the second aircraft reports normal
operations, continue use and inform the first aircraft.
Record the incident on FAA Form 7230 −4 or
appropriate military form.
3.If the second aircraft confirms the malfunc-
tion or in the absence of a second aircraft report,activate the standby equipment or request the monitor
facility to activate.
4.If normal operation is reported after the
standby equipment is activated, continue use, record
the incident on FAA Form 7230 −4 or appropriate
military form, and notify technical operations
personnel (the Systems Engineer of the ARTCC
when an en route aid is involved).
5.If continued malfunction is reported after the
standby equipment is activated or the standby
equipment cannot be activated, inform technicaloperations personnel and request advice on whether
or not the aid should be shut down. In the absence of
a second aircraft report, advise the technicaloperations personnel of the time of the initial aircraft
report and the estimated time a second aircraft report
could be obtained.b.When an aircraft reports a GPS or WAAS
anomaly, request the following information and/or
take the following actions:
1.Record the following minimum information:
(a)Aircraft make, model, and call sign.
(b)Location or position, and altitude at the
time where GPS or WAAS anomaly was observed.
(c)Date/time of occurrence.
2.Request a report from a second aircraft.
3.Record the incident on FAA Form 7230 −4 or
appropriate military form.
4.Inform other aircraft of the anomaly as
specified in paragraph 4-8-1j or k, as applicable.
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT, GPS REPORTEDUNRELIABLE (OR WAAS UNAVAILABLE) IN
VICINITY/AREA (position).
EXAMPLE −
“Attention all air craft, GPS r eported unreliable (or WAAS
unavailable) in the area 30 miles south of Waco VOR.”
c.When a pilot reports a WAAS anomaly,
determine from the pilot what indications he or she
observes and record the information in accordance
with sub-paragraph b above.
2−1−11. USE OF MARSA
a.MARSA may only be applied to military
operations specified in a letter of agreement or other
appropriate FAA or military document.
NOTE−
Application of MARSA is a military command prer ogative.
It will not be invoked indiscriminately by individual unitsor pilots. It will be used only for IFR operations r equiring
its use. Commands authorizing MARSA will ensure that itsimplementation and terms of use are documented and
coordinated with the control agency having jurisdiction
over the area in which the operations are conducted. T erms
of use will assign r esponsibility and provide for separation
among participating aircraft.
b.ATC facilities do not invoke or deny MARSA.
Their sole responsibility concerning the use of
MARSA is to provide separation between military
aircraft engaged in MARSA operations and othernonparticipating IFR aircraft.
c.DOD must ensure that military pilots requesting
special-use airspace/ATCAAs have coordinated with
the scheduling agency, have obtained approval for
JO 7110.65W 12/10/15
2−1−6 Generalentry, and are familiar with the appropriate MARSA
procedures. ATC is not responsible for determining
which military aircraft are authorized to enter
special-use airspace/ATCAAs.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−13, Military Aerial Refueling.
2−1−12. MILITARY PROCEDURES
Military procedures in the form of additions,
modifications, and exceptions to the basic FAA
procedure are prescribed herein when a common
procedure has not been attained or to fulfill a specific
requirement. They must be applied by:
a.ATC facilities operated by that military service.
EXAMPLE −
1.An Air Force facility providing service for an Air Force
base would apply USAF pr ocedures to all traffic r egardless
of class.
2.A Navy facility providing service for a Naval Air Station
would apply USN procedures to all traffic regardless ofclass.
b.ATC facilities, regardless of their parent
organization (FAA, USAF, USN, USA), supportinga designated military airport exclusively. This
designation determines which military procedures
are to be applied.
EXAMPLE −
1.An F AA facility supports a USAF base exclusively;
USAF procedures are applied to all traffic at that base.
2.An F AA facility provides approach control service for a
Naval Air Station as well as supporting a civil airport;basic F AA procedures are applied at both locations by the
F AA facility.
3.A USAF facility supports a USAF base and provides
approach control service to a satellite civilian airport;
USAF procedures are applied at both locations by the
USAF facility.
REFERENCE −
F AAO JO 7110.65, Para 1 −2−5, Annotations.
c.Other A TC facilities when specified in a letter of
agreement.
EXAMPLE −
A USAF unit is using a civil airport supported by an F AAfacility− USAF procedures will be applied as specified in
a letter of agreement between the unit and the F AA facility
to the aircraft of the USAF unit. Basic F AA pr ocedures will
be applied to all other aircraft.2−1−13. FORMATION FLIGHTS
a.Control formation flights as a single aircraft.
When individual control is requested, issue advisory
information which will assist the pilots in attaining
separation. When pilot reports indicate separation has
been established, issue control instructions as
required.
NOTE−
1.Separation responsibility between aircraft within the
formation during transition to individual control rests with
the pilots concerned until approved separation has beenattained.
2.Formation join-up and breakaway will be conducted in
VFR weather conditions unless prior authorization hasbeen obtained from ATC or individual control has beenapproved.
REFERENCE −
F AAO JO 7110.65, Para 5 −5−8, Additional Separation for Formation
Flights.
P/CG Term − Formation Flight.
b.Military and civil formation flights in RVSM
airspace.
1.Utilize RVSM separation standards for a
formation flight, which consists of all RVSMapproved aircraft.
2.Utilize non −RVSM separation standards for
a formation flight above FL 290, which does notconsist of all RVSM approved aircraft.
3.If aircraft are requesting to form a formation
flight to FL 290 or above, the controller who issues
the clearance creating the formation flight is
responsible for ensuring that the proper equipmentsuffix is entered for the lead aircraft.
4.If the flight departs as a formation, and is
requesting FL 290 or above, the first center sectormust ensure that the proper equipment suffix is
entered.
5.If the formation flight is below FL 290 and
later requests FL 290 or above, the controller
receiving the RVSM altitude request must ensure the
proper equipment suffix is entered.
6.Upon break −up of the formation flight, the
controller initiating the break −up must ensure that all
aircraft or flights are assigned their proper equipment
suffix.
2−1−14. COORDINATE USE OF AIRSPACE
a.Ensure that the necessary coordination has been
accomplished before you allow an aircraft under your
JO 7110.65W 12/10/15
2−1−7 Generalcontrol to enter another controller’s area of
jurisdiction.
b.Before you issue a control instruction directly to
a pilot that will change the aircraft’s heading, route,speed, or altitude, you must ensure that coordination
has been completed with all controllers whose area of
jurisdiction is affected by those instructions unlessotherwise specified by a letter of agreement or facility
directive. If your control instruction will be relayed to
the pilot through a source other than another radarcontroller (F SS, ARINC, another pilot, etc.), you are
still responsible to ensure that all required coordina-
tion is completed.
NOTE−
1.It is good operating practice for controllers to confirm
that required coordination has been/will be effected,especially in unusual circumstances, such as recentlymodified sector configurations, airspace changes, routechanges, etc.
2.Ensuring that all required coordination has been
completed does not necessarily imply that the controller
issuing the control instruction directly to the pilot has toperform the coordination action.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−15, Control Transfer.
F AAO JO 7110.65, Para 5 −5−10, Adjacent Airspace.
F AAO JO 7110.65, Para 5 −4−5, Transferring Controller Handoff.
F AAO JO 7110.65, Para 5 −4−6, Receiving Controller Handoff.
2−1−15. CONTROL TRANSFER
a.Transfer control of an aircraft in accordance
with the following conditions:
1.At a prescribed or coordinated location, time,
fix, or altitude; or,
2.At the time a radar handoff and frequency
change to the receiving controller have been
completed and when authorized by a facility directive
or letter of agreement which specifies the type andextent of control that is transferred.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−14, Coordinate Use of Airspace.
F AAO JO 7110.65, Para 5 −4−5, Transferring Controller Handoff.
F AAO JO 7110.65, Para 5 −4−6, Receiving Controller Handoff.
b.Transfer control of an aircraft only after
eliminating any potential conflict with other aircraft
for which you have separation responsibility.
c.Assume control of an aircraft only after it is in
your area of jurisdiction unless specifically coordin-ated or as specified by letter of agreement or a facility
directive.
2−1−16. SURFACE AREAS
a.Coordinate with the appropriate nonapproach
control tower on an individual aircraft basis beforeissuing a clearance which would require flight within
a surface area for which the tower has responsibility
unless otherwise specified in a letter of agreement.
REFERENCE −
FAAO JO 7210.3, Para 4 −3−1, Letters of Agreement.
14 CFR Section 91.127, Operating on or in the Vicinity of an Airport
in Class E Airspace.P/CG Term − Surface Area.
b.Coordinate with the appropriate control tower
for transit authorization when you are providing radartraffic advisory service to an aircraft that will enter
another facility’s airspace.
NOTE−
The pilot is not expected to obtain his/her ownauthorization through each area when in contact with aradar facility.
c.Transfer communications to the appropriate
facility, if required, prior to operation within a surface
area for which the tower has responsibility.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−17, Radio Communications Transfer.
F AAO JO 7110.65, Para 3 −1−1 1, Surface Area Restrictions.
F AAO JO 7110.65, Para 7 −6−1, Application.
14 CFR Section 91.129, Operations in Class D Airspace.
2−1−17. RADIO COMMUNICATIONS
a.Transfer radio communications before an
aircraft enters the receiving controller’s area of
jurisdiction unless otherwise coordinated or specified
by a letter of agreement or a facility directive.
b.Transfer radio communications by specifying
the following:
NOTE−
Radio communications transfer procedures may bespecified by a letter of agreement or contained in the r oute
description of an MTR as published in the DOD Planning
AP/1B (AP/3).
1.The facility name or location name and
terminal function to be contacted. TERMINAL : Omit
the location name when transferring communications
to another controller within your facility, or , when the
tower and TRACON share the same name (for
example, Phoenix Tower and Phoenix TRACON).
JO 7110.65W 12/10/15
2−1−8 GeneralEXCEPTION. Controllers must include the name of
the facility when instructing an aircraft to change
frequency for final approach guidance.
2.Frequency to use except the following may be
omitted:
(a)FSS frequency.
(b)Departure frequency if previously given
or published on a SID chart for the procedure issued.
(c)TERMINAL:
(1)Ground or local control frequency if in
your opinion the pilot knows which frequency is in
use.
(2)The numbers preceding the decimal
point if the ground control frequency is in the121 MHz bandwidth.
EXAMPLE −
“Contact Tower.”“Contact Ground.”
“Contact Ground Point Seven.”
“Contact Ground, One Two Zero Point Eight.”“Contact Huntington Radio.”“Contact Departure.”“Contact Los Angeles Center , One Two Three Point Four.”
3.Time, fix, altitude, or specifically when to
contact a facility. You may omit this when
compliance is expected upon receipt.
NOTE−
AIM, para 5−3−1, ARTCC Communications, informs pilots
that they are expected to maintain a listening watch on the
transferring controller’ s frequency until the time, fix, or
altitude specified.
PHRASEOLOGY −
CONTACT (facility name or location name and terminalfunction), (frequency).
If required,
AT (time, fix, or altitude).
c.Controllers must, within a reasonable amount of
time, take appropriate action to establish/restore
communications with all aircraft for which a
communications transfer or initial contact to his/hersector is expected/required.
NOTE−
For the purposes of this paragraph, a reasonable amount
of time is considered to be 5 minutes from the time the
aircraft enters the contr oller’ s area of jurisdiction or comes
within range of radio/communications coverage. Commu-nications include two −way VHF or UHF radio contact,
data link, or high frequency (HF) radio through anapproved third −party pr ovider such as ARINC.
d.In situations where an operational advantage
will be gained, and following coordination with the
receiving controller, you may instruct aircraft on theground to monitor the receiving controller’s
frequency.
EXAMPLE −
“Monitor Tower.”“Monitor Ground.”“Monitor Ground Point Seven.”
“Monitor Ground, One Two Zero Point Eight.”
e.In situations where a sector has multiple
frequencies or when sectors are combined usingmultiple frequencies and the aircraft will remain
under your jurisdiction, transfer radio communica-
tion by specifying the following:
PHRASEOLOGY −
(Identification) CHANGE TO MY FREQUENCY (state
frequency).
EXAMPLE −
“United two twenty-two change to my frequency one twothree point four.”
REFERENCE −
AIM, Para 4−2−3, Contact Pr ocedures.
f.Avoid issuing a frequency change to helicopters
known to be single-piloted during air-taxiing,hovering, or low-level flight. Whenever possible,
relay necessary control instructions until the pilot is
able to change frequency.
NOTE−
Most light helicopters are flown by one pilot and requirethe constant use of both hands and feet to maintain control.
Although Flight Control Friction Devices assist the pilot,
changing frequency near the ground could result ininadvertent gr ound contact and consequent loss of control.
Pilots are expected to advise ATC of their single-pilotstatus if unable to comply with a frequency change.
REFERENCE −
AIM, Para 4−3−14, Communications.
g.In situations where the controller does not want
the pilot to change frequency but the pilot is expecting
or may want a frequency change, use the followingphraseology.
PHRASEOLOGY −
REMAIN THIS FREQUENCY.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−1, Clearance Information.
F AAO JO 7110.65, Para 5 −12−9, Communication Transfer.
JO 7110.65W 12/10/15
2−1−9 General2−1−18. OPERATIONAL REQUESTS
Respond to a request from another controller, a pilot
or vehicle operator by one of the following verbalmeans:
a.Restate the request in complete or abbreviated
terms followed by the word “APPROVED.” Thephraseology “APPROVED AS REQUESTED” may
be substituted in lieu of a lengthy readback.
PHRASEOLOGY −
(Requested operation) APPROVED.
or
APPROVED AS REQUESTED.
b.State restrictions followed by the word
“APPROVED.”
PHRASEOLOGY −
(Restriction and/or additional instructions, requested
operation) APPROVED.
c.State the word “UNABLE” and, time permit-
ting, a reason.
PHRASEOLOGY −
UNABLE (requested operation).
and when necessary,
(reason and/or additional instructions.)
d.State the words “STAND BY .”
NOTE−
“STAND BY” is not an approval or denial. The controller
acknowledges the request and will respond at a later time.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
F AAO JO 7110.65, Para 4 −2−5, Route or Altitude Amendments.
F AAO JO 7110.65, Para 7 −9−3, Methods.
2−1−19. WAKE TURBULENCE
a.Apply wake turbulence procedures to an aircraft
operating behind another aircraft when wake
turbulence separation is required.NOTE−
Para 5−5−4, Minima, subparagraphs g and h specify the
required radar wake turbulence separations. Time-based
separations are contained in Para 3-9-6, Same Runway
Separation, Para 3-9-7, Wake Turbulence Separation for
Intersection Departures, Para 3-9-8, Intersecting Runway
Separation, Para 3-9-9, Nonintersecting Converging
Runway Operations, Para 3-10-3, Same Runway Separa-
tion, Para 3-10-4, Intersecting Runway Separation, Para
6-1-4, Adjacent Airport Operation, Para 6-1-5, Arrival
Minima, and Para 6-7-5, Interval Minima.
b.The separation minima must continue to
touchdown for all IFR aircraft not making a visual
approach or maintaining visual separation.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−5, Approach Separation Responsibility.
2−1−20. WAKE TURBULENCE
CAUTIONARY ADVISORIES
a.Issue wake turbulence cautionary advisories
including the position, altitude if known, and
direction of flight to aircraft operating behind an
aircraft that requires wake turbulence separation
when:
REFERENCE −
AC 90−23, Air craft Wake Turbulence, Pilot Responsibility, Para 11
F AAO JO 7110.65, Para 5-5-4,Minima, Subparagraph g
1.TERMINAL. VFR aircraft not being radar
vectored are behind the larger aircraft.
2.IFR aircraft accept a visual approach or visual
separation.
REFERENCE −
F AAO JO 7110.65, Para 7 −4−1, Visual Approach.
3.TERMINAL. VFR arriving aircraft that have
previously been radar vectored and the vectoring has
been discontinued.
b.Issue cautionary information to any aircraft if in
your opinion, wake turbulence may have an adverse
effect on it. When traffic is known to be a super
aircraft, include the word super in the description.
When traffic is known to be a heavy aircraft, include
the word heavy in the description.
NOTE−
Wake turbulence may be encountered by aircraft in flight
as well as when operating on the airport movement area.Because wake turbulence is unpredictable, the controlleris not responsible for anticipating its existence or effect.Although not mandatory during ground operations,
controllers may use the words jet blast, propwash, or
rotorwash, in lieu of wake turbulence , when issuing a
caution advisory.
JO 7110.65W 12/10/15
2−1−10 GeneralREFERENCE −
AC 90−23, Air craft Wake Turbulence.
P/CG Term − Aircraft Classes.
P/CG Term − Wake Turbulence.
PHRASEOLOGY −
CAUTION WAKE TURBULENCE (traffic information).
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
2−1−21. TRAFFIC ADVISORIES
Unless an aircraft is operating within Class A airspace
or omission is requested by the pilot, issue traffic
advisories to all aircraft (IFR or VFR) on your
frequency when, in your judgment, their proximitymay diminish to less than the applicable separation
minima. Where no separation minima applies, such
as for VFR aircraft outside of Class B/Class Cairspace, or a TRSA, issue traffic advisories to those
aircraft on your frequency when in your judgment
their proximity warrants it. Provide this service asfollows:
a.To radar identified aircraft:
1.Azimuth from aircraft in terms of the 12 −hour
clock, or
2.When rapidly maneuvering aircraft prevent
accurate issuance of traffic as in 1 above, specify the
direction from an aircraft’s position in terms of the
eight cardinal compass points (N, NE, E, SE, S, SW,W, and NW). This method must be terminated at the
pilot’s request.
3.Distance from aircraft in miles.
4.Direction in which traffic is proceeding
and/or relative movement of traffic.
NOTE−
Relative movement includes closing, converging, parallelsame direction, opposite direction, diverging, overtaking,crossing left to right, crossing right to left.
5.If known, type of aircraft and altitude.
REFERENCE −
F AAO JO 7110.65, Para 2 −4−21, Description of Aircraft Types.
PHRASEOLOGY −
TRAFFIC, (number) O’CLOCK,
or when appropriate,
(direction) (number) MILES, (dir ection)−BOUND and/or
(relative movement),
and if known,(type of aircraft and altitude).
or
When appropriate,
(type of aircraft and relative position), (number of feet)
FEET ABOVE/BELOW YOU.
If altitude is unknown,
ALTITUDE UNKNOWN.
EXAMPLE −
“Traffic, eleven o’clock, one zero miles, southbound,
converging, Boeing Seven Twenty Seven, one seven
thousand.”“Traffic, twelve o’clock, one five miles, opposite dir ection,
altitude unknown.”“Traffic, ten o’clock, one two miles, southeast bound,
one thousand feet below you.”
6.When requested by the pilot, issue radar
vectors to assist in avoiding the traffic, provided the
aircraft to be vectored is within your area of
jurisdiction or coordination has been effected withthe sector/facility in whose area the aircraft is
operating.
7.If unable to provide vector service, inform the
pilot.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−18, Operational Requests.
8.Inform the pilot of the following when traffic
you have issued is not reported in sight:
(a)The traffic is no factor.
(b)The traffic is no longer depicted on radar.
PHRASEOLOGY −
TRAFFIC NO F ACTOR/NO LONGER OBSERVED,
or
(number) O’CLOCK TRAFFIC NO F ACTOR/NO
LONGER OBSERVED,
or
(direction) TRAFFIC NO F ACTOR/NO LONGER
OBSERVED.
b.To aircraft that are not radar identified:
1.Distance and direction from fix.
2.Direction in which traffic is proceeding.
JO 7110.65W 12/10/15
2−1−11 General3.If known, type of aircraft and altitude.
4.ETA over the fix the aircraft is approaching,
if appropriate.
PHRASEOLOGY −
TRAFFIC, (number) MILES/MINUTES (direction) OF(airport or fix), (dir ection)−BOUND,
and if known,
(type of aircraft and altitude),ESTIMATED (fix) (time),
or
TRAFFIC, NUMEROUS AIRCRAFT VICINITY
(location).
If altitude is unknown,
ALTITUDE UNKNOWN.
EXAMPLE −
“Traffic, one zero miles east of Forsythe V −O−R,
Southbound, M −D Eighty, descending to one six
thousand.”
“Traffic, reported one zer o miles west of Downey V −O−R,
northbound, Apache, altitude unknown, estimated JolietV−O−R one three one five.”
“Traffic, eight minutes west of Chicago Heights V −O−R,
westbound, Mooney, eight thousand, estimated Joliet
V−O−R two zero three five.”
“Traffic, numerous aircraft, vicinity of Delia airport.”
c.For aircraft displaying Mode C, not radar
identified, issue indicated altitude.
EXAMPLE −
“Traffic, one o’clock, six miles, eastbound, altitudeindicates six thousand five hundred.”
REFERENCE −
F AAO JO 7110.65, Para 3 −1−6, Traffic Information.
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
F AAO JO 7110.65, Para 7 −6−10, VFR Departure Information.
2−1−22. BIRD ACTIVITY INFORMATION
a.Issue advisory information on pilot-reported,
tower-observed, or radar -observed and pilot-verified
bird activity. Include position, species or size of birds,
if known, course of flight, and altitude. Do this for at
least 15 minutes after receipt of such informationfrom pilots or from adjacent facilities unless visual
observation or subsequent reports reveal the activity
is no longer a factor.EXAMPLE −
“Flock of geese, one o’clock, seven miles, northbound, last
reported at four thousand.”“Flock of small birds, southbound along Mohawk River,
last reported at three thousand.”
“Numerous flocks of ducks, vicinity Lake Winnebago,altitude unknown.”
b.Relay bird activity information to adjacent
facilities and to FSSs whenever it appears it will
become a factor in their areas.
2−1−23. TRANSFER OF POSITION
RESPONSIBILITY
The transfer of position responsibility must be
accomplished in accordance with the “Standard
Operating Practice (SOP) for the Transfer of Position
Responsibility,” and appropriate facility directives
each time operational responsibility for a position is
transferred from one specialist to another.
2−1−24. WHEELS DOWN CHECK
USA/USAF/USN
Remind aircraft to check wheels down on each
approach unless the pilot has previously reported
wheels down for that approach.
NOTE−
The intent is solely to remind the pilot to lower the wheels,
not to place responsibility on the controller.
a.Tower must issue the wheels down check at an
appropriate place in the pattern.
PHRASEOLOGY −
CHECK WHEELS DOWN.
b.Approach/arrival control, GCA must issue the
wheels down check as follows:
1.To aircraft conducting ASR, PAR, or radar
monitored approaches, before the aircraft starts
descent on final approach.
2.To aircraft conducting instrument approaches
and remaining on the radar facility’s frequency,before the aircraft passes the outer marker/final
approach fix.
PHRASEOLOGY −
WHEELS SHOULD BE DOWN.
2−1−25. SUPERVISORY NOTIFICATION
Ensure supervisor/controller-in-charge (CIC) is
aware of conditions which impact sector/position
JO 7110.65W 12/10/15
2−1−12 Generaloperations including, but not limited to, the
following:
a.Weather.
b.Equipment status.
c.Potential sector overload.
d.Emergency situations.
e.Special flights/operations.
f.Possible suspicious aircraft/pilot activity as
prescribed in FAA Order JO 7610.4, paragraph
7−3−1.
2−1−26. PILOT DEVIATION NOTIFICATION
When it appears that the actions of a pilot constitute
a pilot deviation, notify the pilot, workload
permitting.
PHRASEOLOGY −
(Identification) POSSIBLE PILOT DEVIATION ADVISE
YOU CONTACT (facility) AT (telephone number).
REFERENCE −
F AAO 8020.11, Aircraft Accident and Incident Notification,
Investigation, and Reporting, Para 84, Pilot Deviations.
2−1−27. TCAS RESOLUTION ADVISORIES
a.When an aircraft under your control jurisdiction
informs you that it is responding to a TCAS
Resolution Advisory (RA), do not issue control
instructions that are contrary to the RA procedure that
a crew member has advised you that they are
executing. Provide safety alerts regarding terrain or
obstructions and traffic advisories for the aircraft
responding to the RA and all other aircraft under your
control jurisdiction, as appropriate.
b.Unless advised by other aircraft that they are
also responding to a TCAS RA, do not assume that
other aircraft in the proximity of the responding
aircraft are involved in the RA maneuver or are aware
of the responding aircraft’s intended maneuvers.
Continue to provide control instructions, safety
alerts, and traffic advisories as appropriate to such
aircraft.
c.Once the responding aircraft has begun a
maneuver in response to an RA, the controller is notresponsible for providing approved separation
between the aircraft that is responding to an RA and
any other aircraft, airspace, terrain or obstructions.Responsibility for approved separation resumes
when one of the following conditions are met:
1.The responding aircraft has returned to its
assigned altitude, or
2.A crew member informs you that the TCAS
maneuver is completed and you observe thatapproved separation has been reestablished, or
3.The responding aircraft has executed an
alternate clearance and you observe that approved
separation has been reestablished.
NOTE−
1.AC 120−55C, Air Carrier Operational Approval and
Use of TCAS II, suggests pilots use the following
phraseology to notify controllers during TCAS events.When a TCAS RA may affect an ATC clearance, informATC when beginning the maneuver , or as soon as workload
permits.
EXAMPLE −
1.“New York Center, United 321, TCAS climb.”
NOTE−
2.When the RA has been resolved, the flight crew should
advise A TC they are returning to their previously assigned
clearance or subsequent amended clearance.
EXAMPLE −
2.“New York Center, United 321, clear of conflict,
returning to assigned altitude.”
2−1−28. RVSM OPERATIONS
Controller responsibilities must include but not be
limited to the following:
a.Non−RVSM aircraft operating in RVSM
airspace.
1.Ensure non-RVSM aircraft are not permitted
in RVSM airspace unless they meet the criteria of
excepted aircraft and are previously approved by the
operations supervisor/CIC. The following aircraft are
excepted: DOD, DOD-certified aircraft operated by
NASA (T38, F15, F18, WB57, S3, and U2 aircraftonly), MEDEV AC, manufacturer aircraft being
flown for development/certification, and Foreign
State aircraft. These exceptions are accommodatedon a workload or traffic-permitting basis.
NOTE−
The operations supervisor/CIC is responsible for systemacceptance of a non −RVSM aircraft beyond the initial
sector−to−sector coordination following the pilot request
to access the airspace. Operations supervisor/CIC
responsibilities are defined in F AAO JO 7210.3, Chapter 6,
Section 9, Reduced V ertical Separation Minimum (R VSM).3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−1−13 General2.Ensure sector −to−sector coordination for all
non−RVSM aircraft operations within RVSM
airspace.
3.Inform the operational supervisor/CIC when
a non−RVSM exception flight is denied clearance
into RVSM airspace or is removed from RVSM
airspace.
b.Non−RVSM aircraft transitioning RVSM air-
space.
Ensure that operations supervisors/CICs are made
aware when non −RVSM aircraft are transitioning
through RVSM airspace.
c.Apply appropriate separation standards and
remove any aircraft from R VSM airspace that advises
it is unable RVSM due to equipment while en route.
d.Use “negative RVSM” in all verbal ground −to−
ground communications involving non −RVSM
aircraft while cleared to operate within RVSM
airspace.
EXAMPLE −
“Point out Baxter21 climbing to FL 360, negative R VSM.”
e.For the following situations, use the associated
phraseology:
1.To deny clearance into RVSM airspace.
PHRASEOLOGY −
“UNABLE CLEARANCE INTO RVSM AIRSP ACE.”
2.To request a pilot to report when able to
resume RVSM.
PHRASEOLOGY −
“REPORT ABLE TO RESUME RVSM.”
f.In the event of a change to an aircraft’s
navigational capability amend the equipment suffixin order to properly identify non −RVSM aircraft on
the controller display.2−1−29. TERRAIN AWARENESS WARNING
SYSTEM (TAWS) ALERTS
a.When an aircraft under your control jurisdiction
informs you that it is responding to a TAWS (or other
on−board low altitude) alert, do not issue control
instructions that are contrary to the TAWS procedure
that a crew member has advised you that they areexecuting. Provide safety alerts regarding terrain or
obstructions and traffic advisories for the aircraft
responding to the TAWS alert and all other aircraftunder your control jurisdiction, as appropriate.
b.Once the responding aircraft has begun a
maneuver in response to TAWS alert, the controller is
not responsible for providing approved separation
between the aircraft that is responding to a TAWSalert and any other aircraft, airspace, terrain or
obstructions. Responsibility for approved separation
resumes when one of the following conditions aremet:
1.The responding aircraft has returned to its
assigned altitude, or
2.A crew member informs you that the TAWS
maneuver is completed and you observe that
approved separation has been reestablished, or
3.The responding aircraft has executed an
alternate clearance and you observe that approved
separation has been reestablished.
2−1−30. “BLUE LIGHTNING” EVENTS
Ensure that the supervisor/controller −in−charge
(CIC) is notified of reports of possible humantrafficking. These may be referred to as “Blue
Lightning” events.
JO 7110.65W 12/10/15
2−2−1 Flight Plans and Control InformationSection 2. Flight Plans and Control Information
2−2−1. RECORDING INFORMATION
a.Record flight plan information required by the
type of flight plan and existing circumstances. Use
authorized abbreviations when possible.
NOTE−
Generally, all military overseas flights are required toclear through a specified military base operations office(BASOPS). Pilots normally will not file flight plans dir ectly
with an F AA facility unless a BASOPS is not available.
BASOPS will, in turn, forward the IFR flight notification
message to the appropriate center.
b.EN ROUTE. When flight plans are filed directly
with the center, record all items given by the piloteither on a flight progress strip/flight data entry or on
a voice recorder. If the latter, enter in box 26 of the
initial flight progress strip the sector or positionnumber to identify where the information may be
found in the event search and rescue (SAR) activities
become necessary.
REFERENCE −
F AAO JO 7110.65, Para 2 −3−2, En Route Data Entries.
2−2−2. FORWARDING INFORMATION
a.Except during EAS FDP operation, forward the
flight plan information to the appropriate ATC
facility, FSS, or BASOPS and record the time of filing
and delivery on the form.
b.EN ROUTE. During EAS FDP operation, the
above manual actions are required in cases where the
data is not forwarded automatically by the computer.
NOTE−
During EAS FDP operation, data is exchanged between
interfaced automated facilities and both the data and time
of transmission are recorded automatically.
c.EN ROUTE. Forward proposed tower en route
flight plans and any related amendments to the
appropriate departure terminal facility.
2−2−3. FORWARDING VFR DATA
TERMINAL
Forward aircraft departure times to FSSs or military
operations offices when they have requested them.
Forward other VFR flight plan data only if requested
by the pilot.2−2−4. MILITARY DVFR DEPARTURES
TERMINAL
Forward departure times on all DVFR departures
from joint-use airports to the military operations
office.
NOTE−
1.Details for handling air carrier and nonscheduled civil
DVFR flight data are contained in F AA Order JO 7610.4,Special Operations.
2.Civil pilots departing DVFR from a joint-use airport
will include the phrase “DVFR to (destination)” in theirinitial call-up to an F AA-operated tower.
2−2−5. IFR TO VFR FLIGHT PLAN CHANGE
Request a pilot to contact the appropriate FSS if the
pilot informs you of a desire to change from an IFRto a VFR flight plan.
2−2−6. IFR FLIGHT PROGRESS DATA
Forward control information from controller to
controller within a facility, then to the receiving
facility as the aircraft progresses along its route.
Where appropriate, use computer equipment in lieuof manual coordination procedures. Do not use the
remarks section of flight progress strips in lieu of
voice coordination to pass control information.Ensure that flight plan and control information is
correct and up-to-date. When covered by a letter of
agreement/facility directive, the time requirements of
subpara a may be reduced, and the time requirements
of subpara b1 and para 2 −2−11, Forwarding
Amended and UTM Data, subpara a may be increased
up to 15 minutes when facilitated by automated
systems or mandatory radar handoffs; or if
operationally necessary because of manual dataprocessing or nonradar operations, the time require-
ments of subpara a may be increased.
NOTE−
1.The procedures for preparing flight plan and control
information related to altitude reservations (ALTRVs) arecontained in F AAO JO 7210.3, para 8 −1−2, Facility
Operation and Administration, ALTRV Flight DataProcessing. Development of the methods for assuring the
accuracy and completeness of ALTRV flight plan and
control information is the responsibility of the militaryliaison and security officer.
JO 7110.65W 12/10/15
2−2−2 Flight Plans and Control Information2.The term facility in this paragraph refers to centers and
terminal facilities when operating in an en route capacity.
a.Forward the following information at least
15 minutes before the aircraft is estimated to enter the
receiving facility’s area:
1.Aircraft identification.
2.Number of aircraft if more than one, heavy
aircraft indicator “H/” if appropriate, type of aircraft,
and aircraft equipment suffix.
3.Assigned altitude and ETA over last reporting
point/fix in transferring facility’s area or assumeddeparture time when the departure point is the last
point/fix in the transferring facility’s area.
4.Altitude at which aircraft will enter the
receiving facility’s area if other than the assigned
altitude.
5.True airspeed.
6.Point of departure.
7.Route of flight remaining.
8.Destination airport and clearance limit if
other than destination airport.
9.ETA at destination airport (not required for
military or scheduled air carrier aircraft).
10.Altitude requested by the aircraft if assigned
altitude differs from requested altitude (within a
facility only).
NOTE−
When an aircraft has crossed one facility’ s area and
assignment at a different altitude is still desired, the pilotwill reinitiate the request with the next facility.
REFERENCE −
F AAO JO 7110.65, Para 4 −5−8, Anticipated Altitude Changes.
11.When flight plan data must be forwarded
manually and an aircraft has been assigned a beacon
code by the computer, include the code as part of theflight plan.
NOTE−
When an IFR aircraft, or a VFR aircraft that has beenassigned a beacon code by the EAS and whose flight planwill terminate in another facility’ s area, cancels ATC
service or does not activate the flight plan, send a remove
strips (RS ) message on that aircraft via the EAS keyboard,
the FDIO keyboard or call via service F .12.Longitudinal separation being used between
aircraft at the same altitude if it results in these aircraft
having less than 10 minutes separation at the
facilities’ boundary.
13.Any additional nonroutine operational
information pertinent to flight safety.
NOTE−
EN ROUTE. This includes alerting the r eceiving contr oller
that the flight is conducting celestial navigation training.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−2, Celestial Navigation Training.
b.Forward position report over last reporting
point in the transferring facility’s area if any of the
following conditions exist:
1.Time differs more than 3 minutes from
estimate given.
2.Requested by receiving facility.
3.Agreed to between facilities.
2−2−7. MANUAL INPUT OF COMPUTER-
ASSIGNED BEACON CODES
When a flight plan is manually entered into the
computer and a computer-assigned beacon code has
been forwarded with the flight plan data, insert the
beacon code in the appropriate field as part of theinput message.
2−2−8. ALTRV INFORMATION
EN ROUTE
When an aircraft is a part of an approved ALTRV ,
forward only those items necessary to properlyidentify the flight, update flight data contained in the
ALTRV APVL, or revise previously given
information.
2−2−9. COMPUTER MESSAGE
VERIFICATION
EN ROUTE
Unless your facility is equipped to automatically
obtain acknowledgment of receipt of transferred data,
when you transfer control information by computermessage, obtain, via Service F, acknowledgment that
the receiving center has received the message and
verification of the following:
JO 7110.65W 12/10/15
2−2−3 Flight Plans and Control Informationa.Within the time limits specified by a letter of
agreement or when not covered by a letter of
agreement, at least 15 minutes before the aircraft is
estimated to enter the receiving facility’s area, or at
the time of a radar handoff, or coordination fortransfer of control:
1.Aircraft identification.
2.Assigned altitude.
3.Departure or coordination fix time.
b.Any cancellation of IFR or EAS generated VFR
flight plan.
REFERENCE −
F AAO JO 7110.65, Para 2 −2−6, IFR Flight Progress Data.
2−2−10. TRANSMIT PROPOSED FLIGHT
PLAN
EN ROUTE
a.Transmit proposed flight plans which fall
within an ARTCC’s Proposed Boundary Crossing
Time (PBCT) parameter to adjacent AR TCC’s via the
Computer B network during hours of inter-center
computer operation. In addition, when the route of
flight of any proposed f light plan exceeds 20 ele-
ments external to the originating ARTCC’s area,
NADIN must be used to forward the data to all
affected centers.
b.During nonautomated operation, the proposed
flight plans must be sent via NADIN to the othercenters involved when any of the following
conditions are met:
1.The route of flight external to the originating
center’s area consists of 10 or more elements and the
flight will enter 3 or more other center areas.
NOTE−
An element is defined as either a fix or route as specified in
FAAO JO 7110.10, Flight Services, para 6 −3−3, IFR Flight
Plan Control Messages.
2.The route of flight beyond the first point of
exit from the originating center’s area consists of
10 or more elements, which are primarily fixesdescribed in fix-radial-distance or latitude/longitude
format, regardless of the number of other center areas
entered.
3.The flight plan remarks are too lengthy for
interphone transmission.2−2−11. FORWARDING AMENDED AND
UTM DATA
a.Forward any amending data concerning previ-
ously forwarded flight plans except that revisions to
ETA information in para 2 −2−6, IFR Flight Progress
Data, need only be forwarded when the time differs
by more than 3 minutes from the estimate given.
PHRASEOLOGY −
(Identification), REVISED (revised information).
EXAMPLE −
“American Two, revised flight level, three three zero.”
“United Eight Ten, r evised estimate, Front Royal two zero
zero five.”
“Douglas Five Zero One Romeo, revised altitude, eight
thousand.”
“U.S. Air Eleven Fifty −one, revised type, heavy Boeing
Seven Sixty-seven.”
REFERENCE −
F AAO JO 7110.65, Para 2 −2−6, IFR Flight Progress Data.
b.Computer acceptance of an appropriate input
message fulfills the requirement for sending amended
data. During EAS FDP operations, the amendment
data are considered acknowledged on receipt of acomputer update message or a computer −generated
flight progress strip containing the amended data.
NOTE−
1.The successful utilization of automation equipment
requires timely and accurate insertion of changes and/ornew data.
2.If a pilot is not issued a computer-generated
PDR/PDAR/P AR and if amendment data is not entered into
the computer, the next controller will have incorrect route
information.
c.Forward any amended control information and
record the action on the appropriate flight progress
strip. Additionally, when a route or altitude in apreviously issued clearance is amended within
15 minutes of an aircraft’s proposed departure time,
the facility that amended the clearance must
coordinate the amendment with the receiving facility
via verbal AND automated means to ensure timelypassage of the information.
NOTE−
The term “receiving” facility means the ATC facility that
is expected to transmit the amended clearance to theintended aircraft/pilot.
JO 7110.65W 12/10/15
2−2−4 Flight Plans and Control Informationd.EN ROUTE. Effect manual coordination on any
interfacility flight plan data that is not passed through
automated means.
e.EN ROUTE. When a controller receives a UTM
notification to an FDIO only facility, they must ef fect
manual coordination for the flight plan data. In
addition, the controller must verify the flight plan
data to the receiving facility within three minutes of
the transfer of control point estimate.
NOTE−
FDIO only facilities are facilities with FDIO but without
ARTS or STARS.
2−2−12. AIRBORNE MILITARY FLIGHTS
Forward to FSSs the following information received
from airborne military aircraft:
a.IFR flight plans and changes from VFR to IFR
flight plans.
b.Changes to an IFR flight plan as follows:
1.Change in destination:
(a)Aircraft identification and type.
(b)Departure point.
(c)Original destination.
(d)Position and time.
(e)New destination.
(f)ETA.
(g)Remarks including change in fuel exhaus-
tion time.
(h)Revised ETA.
2.Change in fuel exhaustion time.
NOTE−
This makes current information available to FSSs for r elay
to military bases concerned and for use by centers in theevent of two −way radio communications failure.
2−2−13. FORWARDING FLIGHT PLAN
DATA BETWEEN U.S. ARTCCs ANDCANADIAN ACCs
EN ROUTE
a.Domestic. (Continental U.S./Canadian airspace
except Alaska) Proposed departure flight plans and
en route estimates will be handled on a 30 minute leadtime (or as bilaterally agreed) between any ACC and
ARTCC.
b.International. Any route changes (except SIDs)
must be forwarded to the appropriate Oceanic/Pre-
oceanic ACC or ARTCC with an optimum lead time
of 30 minutes or as soon as this information becomes
available.
c.Initially, if a flight goes from U.S. airspace into
Canadian airspace and returns to U.S. airspace, the
ACC will be responsible for forwarding the flightplan data to the appropriate ARTCC by voice
transmission except for flights which traverse
mutually agreed on airways/fixes. These airways/
fixes will be determined on a case-by-case basis and
will be based on time and distance considerations atthe service area office.
2−2−14. TELETYPE FLIGHT DATA
FORMAT − U.S. ARTCCs − CANADIAN ACCs
EN ROUTE
The exchange of flight plan data between Canadian
ACCs and U.S. ARTCCs must be made as follows:
a.The U.S. ARTCCs will transmit flight data to
the Canadian ACCs in one of the following formats:
1.NADIN II input format as described in the
NAS Management Directives (MDs) for:
(a)Flight Plan Messages:
(1)Active.
(2)Proposed.
(b)Amendment messages.
(c)Cancellation messages.
(d)Response Messages to Canadian Input:
(1)Acknowledgment messages.
(2)Error messages.
(3)Rejection messages.
2.Transport Canada (TC) ACC Flight Strip
Format: Where the data to be printed on the ACC strip
form exceeds the strip form field size, the NADIN II
input format in 1 above will be used. Inputsequentially fields 1 through 8 in para 2 −2−6, IFR
Flight Progress Data, subpara a.
b.TC’s ACCs will transmit flight data to the FAA
ARTCCs in the following format:
JO 7110.65W 12/10/15
2−2−5 Flight Plans and Control Information1.NADIN II input format as described in NAS
MDs for:
(a)Flight Plan Messages:
(1)Active.
(2)Proposed.
(b)Amendment messages.
(c)Cancellation messages.
(d)Correction messages.
2−2−15. NORTH AMERICAN ROUTE
PROGRAM (NRP) INFORMATION
a.“NRP” must be retained in the remarks section
of the flight plan if the aircraft is moved due to
weather, traffic, or other tactical reasons.
NOTE−
Every effort should be made to ensure the aircraft isreturned to the original filed flight plan/altitude as soon as
conditions warrant.
b.If the route of flight is altered due to a pilot
request, “NRP” must be removed from the remarks
section of the flight plan.
c.“NRP” must not be entered in the remarks
section of a flight plan, unless prior coordination is
accomplished with the ATCSCC or as prescribed byinternational NRP flight operations procedures.
d.The en route facility within which an
international flight entering the conterminous U.S.
requests to participate in the NRP must enter “NRP”
in the remarks section of the flight plan.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 2 −3−2, En Route Data Entries.
F AAO JO 7110.65, Para 4 −2−5, Route or Altitude Amendments.
F AAO JO 7210.3, Chapter 17, Section 16, North American Route
Program.
JO 7110.65W 12/10/15
2−3−1 Flight Progress StripsSection 3. Flight Progress Strips
2−3−1. GENERAL
Unless otherwise authorized in a facility directive,
use flight progress strips to post current data onair traffic and clearances required for control and
other air traffic control services. To prevent
misinterpretation when data is hand printed, usestandard hand-printed characters.
En route: Flight progress strips must be posted.
REFERENCE −
F AAO JO 7210.3, Para 6−1−6, Flight Progress Strip Usage.
a.Maintain only necessary current data and
remove the strips from the flight progress boards
when no longer required for control purposes. To
correct, update, or preplan information:
1.Do not erase or overwrite any item. Use an
“X” to delete a climb/descend and maintain arrow, an
at or above/below symbol, a cruise symbol, and
unwanted altitude information. W rite the new altitude
information immediately adjacent to it and within the
same space.
2.Do not draw a horizontal line through an
altitude being vacated until after the aircraft hasreported or is observed (valid Mode C) leaving the
altitude.
3.Preplanning may be accomplished in red
pencil.
b.Manually prepared strips must conform to the
format of machine-generated strips and manual strip
preparation procedures will be modified simultan-eously with the operational implementation of
changes in the machine-generated format.
(See FIG 2−3−1.)
c.Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is defined ina facility directive, i.e. 5,000 feet as 5, and 2,800 as
NOTE−
A slant line crossing through the number zero andunderline of the letter “s” on handwritten portions of flight
progress strips are required only when there is reason to
believe the lack of these markings could lead to
misunderstanding. A slant line crossing through thenumber zero is required on all weather data.
JO 7110.65W 12/10/15
2−3−2 Flight Progress StripsFIG 2−3−1
Standard Recording of Hand-printed Characters
Hand Printed Typed Typed Hand Printed
A
B
C
D
E
F
G
H
I
J
K
L
MT
U
V
W
X
Y
Z
N
Q
SSRPO6
0U
JO 7110.65W 12/10/15
2−3−3 Flight Progress Strips2−3−2. EN ROUTE DATA ENTRIES
FIG 2−3−2
Flight Progress Strip
(7230−19)
a.Information recorded on the flight progress
strips (FAA Forms 7230 −19) must be entered in the
correspondingly numbered spaces:
TBL 2−3−1
Block Information Recorded
1. Verification symbol if required.
2. Revision number.
DSR−Not used.
3. Aircraft identification.
4. Number of aircraft if more than one, heavy
aircraft indicator “H/” if appropriate, type of
aircraft, and aircraft equipment suffix.
5. Filed true airspeed.
6. Sector number.
7. Computer identification number if required.
8. Estimated ground speed.
9. Revised ground speed or strip request (SR)
originator.
10. Strip number.DSR− Strip number/Revision number.
11. Previous fix.
12. Estimated time over previous fix.
13. Revised estimated time over previous fix.Block Information Recorded
14. Actual time over previous fix, or actual
departure time entered on first fix posting after
departure.
14a. Plus time expressed in minutes from the
previous fix to the posted fix.
15. Center−estimated time over fix (in hours and
minutes), or clearance information for
departing aircraft.
16. Arrows to indicate if aircraft is departing ( ↑) or
arriving ( ↓).
17. Pilot−estimated time over fix.
18. Actual time over fix, time leaving holding fix,
arrival time at nonapproach control airport, or
symbol indicating cancellation of IFR flight
plan for arriving aircraft, or departure time(actual or assumed).
19. Fix. For departing aircraft, add proposeddeparture time.
20. Altitude information (in hundreds of feet) or as
noted below.
NOTE−Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is
defined in a facility directive, i.e. FL 330 as 33,
5,000 feet as 5, and 2,800 as 2.8.
JO 7110.65W 12/10/15
2−3−4 Flight Progress StripsBlock Information Recorded
20a. OPTIONAL USE, when voice recorders are
operational;
REQUIRED USE, when the voice recorders
are not operating and strips are being use at the
facility. This space is used to record reportedRA events. The letters RA followed by a climb
or descent arrow (if the climb or descent action
is reported) and the time (hhmm) the event isreported.
21. Next posted fix or coordination fix.
22. Pilot’s estimated time over next fix.
23. Arrows to indicate north ( ↑), south ( ↓), east
(→), or west ( ←) direction of flight if required.
24. Requested altitude.
NOTE−Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is
defined in a facility directive, i.e., FL 330 as 33,
5,000 feet as 5, and 2,800 as 2.8 .
25. Point of origin, route as required for control
and data relay, and destination.Block Information Recorded
26. Pertinent remarks, minimum fuel, pointout/radar vector/speed adjustment information
or sector/position number (when applicable in
accordance with para 2 −2−1, Recording In-
formation), or NRP. High Altitude Redesign(HAR) or Point−to−point (PTP) may be used at
facilities actively using these programs.
27. Mode 3/A beacon code if applicable.
28. Miscellaneous control data (expected further
clearance time, time cleared for approach,
etc.).
29−30. Transfer of control data and coordination
indicators.
b.Latitude/longitude coordinates may be used to
define waypoints and may be substituted fornonadapted NA V AIDs in space 25 of domestic en
route flight progress strips provided it is necessary to
accommodate a random RNA V or GNSS routerequest.
c.Facility air traffic managers may authorize the
optional use of spaces 13, 14, 14a, 22, 23, 24, and 28
for point out information, radar vector information,speed adjustment information, or transfer of control
data.
JO 7110.65W 12/10/15
2−3−5 Flight Progress Strips2−3−3. OCEANIC DATA ENTRIES
FIG 2−3−3
a.The Ocean21 system displays information on
electronic flight progress strips and, in the event of a
catastrophic system failure, will print flight progress
strips with data in the corresponding numbered
spaces:
TBL 2−3−2
Block Information Recorded
1. Mode 3/A beacon code, if applicable.
2. Number of aircraft, if more than one, and type
of aircraft.
3. Aircraft identification.
4. Reduced separation flags. Indicators are available for:
M − Mach Number Technique (MNT),
R − Reduced MNT,
D or 3 − Distance −based longitudinal
separation using 50 NM (D) or 30 NM (3), and
W− Reduced Vertical Separation Minimum
(RVSM).These flags are selectable for aircraft whoseflight plans contain the required equipment
qualifiers for each separation criteria.
5. Controlling sector number.
6. Filed airspeed or assigned Mach number/True
airspeed.
7. Reported flight level. May contain an indicator
for a flight that is climbing ( ↑) or descending
(↓). Reports from Mode C, ADS or position
reports are displayed in that order ofpreference.
8. Cleared flight level. May contain an indicatorfor a future conditional altitude ( * ) that cannot
be displayed.Block Information Recorded
9. Requested flight level, if applicable.
10. Previously reported position.
11. Actual time over previously reported position.
12. Last reported position.
13. Actual time over last reported position.
14. Next reporting position.
15. In−conformance pilot’s estimate or
controller −accepted pilot’s estimate for next
reporting position.
16. Future reporting position(s).
17. System estimate for future reporting
position(s).
18. Departure airport or point of origin.
19. Destination airport or filed point of flighttermination.
20. Indicators. Indicators and toggles fordisplaying or suppressing the display of the
route of flight (F), s econd flight profile (2),
radar contact (A), annotations (&), degradedRequired Navigation Performance (RNP,indicator R) and clearance restrictions (X).
21. Coordination indicator(s).
22. Annotations.
23. Clearance restrictions and conditions (may bemultiple lines).
24. Strip number and total number of strips (printed
strips only).
b.Standard annotations and abbreviations for
Field 22 may be specified by facility directives.
JO 7110.65W 12/10/15
2−3−6 Flight Progress Strips2−3−4. TERMINAL DATA ENTRIES
a.Arrivals:
Information recorded on the flight progress strips
(FAA Forms 7230 −7.1, 7230−7.2, and 7230 −8) must
be entered in the correspondingly numbered spaces.Facility managers can authorize omissions and/or
optional use of spaces 2A, 8A, 8B, 9A, 9B, 9C, and
10−18, if no misunderstanding will result. These
omissions and/or optional uses must be specified in a
facility directive.
FIG 2−3−4
TBL 2−3−3
Block Information Recorded
1. Aircraft identification.
2. Revision number (FDIO locations only).
2A. Strip request originator. (At FDIO locations
this indicates the sector or position that
requested a strip be printed.)
3. Number of aircraft if more than one, heavy
aircraft indicator “H/” if appropriate, type of
aircraft, and aircraft equipment suffix.
4. Computer identification number if required.
5. Secondary radar (beacon) code assigned.
6. (FDIO Locations.) The previous fix will be
printed.
(Non−FDIO Locations.) Use of the inbound
airway. This function is restricted to facilitieswhere flight data is received via interphonewhen agreed upon by the center and terminal
facilities.
7. Coordination fix.
8. Estimated time of arrival at the coordination
fix or destination airport.
8A. OPTIONAL USE.Block Information Recorded
8B. OPTIONAL USE, when voice recorders are
operational;
REQUIRED USE, when the voice recorders
are not operating and strips are being used atthe facility. This space is used to recordreported RA events when the voice recorders
are not operational and strips are being used at
the facility. The letters RA followed by a climb
or descent arrow (if the climb or descent actionis reported) and the time (hhmm) the event is
reported.
9. Altitude (in hundreds of feet) and remarks.
NOTE−Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is
defined in a facility directive, i. e., FL 230 as23, 5,000 feet as 5, and 2,800 as 2.8.
9A. Minimum fuel, destination airport/point out/radar vector/speed adjustment information.
Air traffic managers may authorize in a facility
directive the omission of any of these items,except minimum fuel, if no misunderstanding
will result.
NOTE−Authorized omissions and optional use of
spaces must be specified in the facility dir ective
concerning strip marking procedures.
9B. OPTIONAL USE.
9C. OPTIONAL USE.
10−18. Enter data as specified by a facility directive.
Radar facility personnel need not enter data in
these spaces except when nonradar procedures
are used or when radio recording equipment isinoperative.
JO 7110.65W 12/10/15
2−3−7 Flight Progress Stripsb.Departures:
Information recorded on the flight progress strips
(FAA Forms 7230 −7.1, 7230−7.2, and 7230 −8) shall
be entered in the correspondingly numbered spaces.Facility managers can authorize omissions and/or
optional use of spaces 2A, 8A, 8B, 9A, 9B, 9C, and
10−18, if no misunderstanding will result. These
omissions and/or optional uses shall be specified in a
facility directive.
FIG 2−3−5
TBL 2−3−4
Block Information Recorded
1. Aircraft identification.
2. Revision number (FDIO locations only).
2A. Strip request originator. (At FDIO locations
this indicates the sector or position that
requested a strip be printed.)
3. Number of aircraft if more than one, heavy
aircraft indicator “H/” if appropriate, type of
aircraft, and aircraft equipment suffix.
4. Computer identification number if required.
5. Secondary radar (beacon) code assigned.
6. Proposed departure time.
7. Requested altitude.
NOTE−Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is
defined in a facility directive, i. e., FL 230 as23, 5,000 feet as 5, and 2,800 as 2.8.
8. Departure airport.
8A. OPTIONAL USE.Block Information Recorded
8B. OPTIONAL USE , when voice recorders are
operational;
REQUIRED USE, when the voice recorders
are not operating and strips are being used atthe facility. This space is used to recordreported RA events when the voice recorders
are not operational and strips are being used at
the facility. The letters RA followed by a climb
or descent arrow (if the climb or descent actionis reported) and the time (hhmm) the event is
reported.
9. Computer −generated: Route, destination,
and remarks. Manually enter altitude/altitude
restrictions in the order flown, if appropriate,
and remarks.
9. Hand−prepared: Clearance limit, route,
altitude/altitude restrictions in the order flown,
if appropriate, and remarks.
NOTE−Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is
defined in a facility directive, i.e., FL 230 as 23,
5,000 feet as 5, and 2,800 as 2.8.
9A. OPTIONAL USE.
9B. OPTIONAL USE.
9C. OPTIONAL USE.
10−18. Enter data as specified by a facility directive.
Items, such as departure time, runway used for
takeoff, check marks to indicate information
forwarded or relayed, may be entered in thesespaces.
JO 7110.65W 12/10/15
2−3−8 Flight Progress Stripsc.Overflights:
Information recorded on the flight progress strips
(FAA Forms 7230 −7.1, 7230−7.2, and 7230 −8) shall
be entered in the correspondingly numbered spaces.Facility managers can authorize omissions and/or
optional use of spaces 2A, 8A, 8B, 9A, 9B, 9C, and
10−18, if no misunderstanding will result. These
omissions and/or optional uses shall be specified in a
facility directive.
FIG 2−3−6
TBL 2−3−5
Block Information Recorded
1. Aircraft identification.
2. Revision number (FDIO locations only).
2A. Strip request originator. (At FDIO locations
this indicates the sector or position that
requested a strip be printed.)
3. Number of aircraft if more than one, heavy
aircraft indicator “H/” if appropriate, type of
aircraft, and aircraft equipment suffix.
4. Computer identification number if required.
5. Secondary radar (beacon) code assigned.
6. Coordination fix.
7. Overflight coordination indicator (FDIO
locations only).
NOTE−The overflight coordination indicator
identifies the facility to which flight data has
been forwarded.
8. Estimated time of arrival at the coordination
fix.
8A. OPTIONAL USE.Block Information Recorded
8B. OPTIONAL USE, when voice recorders are
operational;
REQUIRED USE , when the voice recorders
are not operating and strips are being used atthe facility. This space is used to recordreported RA events when the voice recorders
are not operational and strips are being used at
the facility. The letters RA followed by a climb
or descent arrow (if the climb or descent actionis reported) and the time (hhmm) the event is
reported.
9. Altitude and route of flight through the
terminal area.
NOTE−Altitude information may be written in
thousands of feet provided the procedure is
authorized by the facility manager, and is
defined in a facility directive, i.e., FL 230 as 23,
5,000 feet as 5, and 2,800 as 2.8.
9A. OPTIONAL USE.
9B. OPTIONAL USE.
9C. OPTIONAL USE.
10−18. Enter data as specified by a facility directive.
NOTE−
National standardization of items (10 through 18) is notpractical because of regional and local variations inoperating methods; e.g., single fix, multiple fix, radar,
tower en route control, etc.
JO 7110.65W 12/10/15
2−3−9 Flight Progress Stripsd.Air traffic managers at automated terminal
radar facilities may waive the requirement to use
flight progress strips provided:
1.Backup systems such as multiple radar
sites/systems or single site radars with CENRAP are
utilized.
2.Local procedures are documented in a facility
directive. These procedures should include but not be
limited to:
(a)Departure areas and/or procedures.
(b)Arrival procedures.
(c)Overflight handling procedures.
(d)Transition from radar to nonradar.
(e)Transition from ARTS to non −ARTS.
(f)Transition from ASR to CENRAP.
(g)Transition to or from ESL.
3.No misunderstanding will occur as a result of
no strip usage.
4.Unused flight progress strips, facility de-
veloped forms and/or blank notepads shall be
provided for controller use.
5.Facilities shall revert to flight progress strip
usage if backup systems referred to in subpara d1 are
not available.
e.Air traffic managers at FDIO locations may
authorize reduced lateral spacing between fields so as
to print all FDIO data to the left of the strip
perforation. When using FAA Form 7230 −7.2, all
items will retain the same relationship to each other
as they do when the full length strip (FAA
Form 7230 −7.1) is used.
2−3−5. AIRCRAFT IDENTITY
Indicate aircraft identity by one of the following
using combinations not to exceed seven alphanumer-
ic characters:
a.Civil aircraft, including the air -carrier letter-di-
git registration number which can include the letter
“T” for air taxi, the letter “L” for MEDEV AC, or the
3-letter company designator specified in FAA OrderJO 7340.2, Contractions, followed by the trip or flight
number. Use the operating air carrier’s company
name in identifying equipment interchange flights.EXAMPLE −
“N12345.”“TN5552Q.”“AAl192.”
“LN751B.”
NOTE−
The letter “L” is not to be used for air carrier/air taxiMEDEV AC aircraft.
b.Military Aircraft.
1.Prefixes indicating branch of service and/or
type of mission followed by the last 5 digits of the
serial number (the last 4 digits for CFC and CTG).(See TBL 2 −3−6 and TBL 2 −3−7.)
2.Pronounceable words of 3, 4, 5, and 6 letters
followed by a 4 −, 3−, 2−, or 1−digit number.
EXAMPLE −
“SAMP Three One Six.”
3.Assigned double-letter 2 −digit flight number.
4.Navy or Marine fleet and training command
aircraft, one of the following:
(a)The service prefix and 2 letters (use
phonetic alphabet equivalent) followed by 2 or
3 digits.
TBL 2−3−6
Branch of Service Prefix
Prefix Branch
A U.S. Air Force
C U.S. Coast Guard
G Air or Army National Guard
R U.S. Army
VM U.S. Marine Corps
VV U.S. Navy
CFC Canadian Forces
CTG Canadian Coast Guard
TBL 2−3−7
Military Mission Prefix
Prefix Mission
E Medical Air Evacuation
F Flight Check
L LOGAIR (USAF Contract)
RCH AMC (Air Mobility Command)
S Special Air Mission
(b)The service prefix and a digit and a letter
(use phonetic alphabet equivalent) followed by 2 or
3 digits.
JO 7110.65W 12/10/15
2−3−10 Flight Progress Strips5.Aircraft carrying the President, Vice
President, and/or their family members will use the
identifiers in the following tables. See TBL 2 −3−8
and TBL 2 −3−9.
TBL 2−3−8
President and Family
Service President Family
Air Force AF1 EXEC1F
Marine VM1 EXEC1F
Navy VV1 EXEC1F
Army RR1 EXEC1F
Coast Guard C1 EXEC1F
Guard G1 EXEC1F
Commercial EXEC1 EXEC1F
TBL 2−3−9
Vice President and Family
Service Vice President Family
Air Force AF2 EXEC2F
Marine VM2 EXEC2F
Navy VV2 EXEC2F
Army RR2 EXEC2F
Coast Guard C2 EXEC2F
Guard G2 EXEC2F
Commercial EXEC2 EXEC2F
c.Special-use. Approved special-use identifiers.
2−3−6. AIRCRAFT TYPE
Use the approved aircraft type designator, in
accordance with FAA Order 7360.1, Aircraft Type
Designators.
2−3−7. USAF/USN UNDERGRADUATE
PILOTS
To identify aircraft piloted by solo USAF/USN
undergraduate student pilots (who may occasionallyrequest revised clearances because they normally are
restricted to flight in VFR conditions), the aircraft
identification in the flight plan shall include the letter
“Z” as a suffix. Do not use this suffix, however, in
ground-to-air communication.
NOTE−
USAF solo students who have passed an instrument
certification check may penetrate cloud layers in climb or
descent only. Requests for revised clearances to avoidclouds in level flight can still be expected. This does notchange the requirement to use the letter “Z” as a suffix to
the aircraft identification.
REFERENCE −
F AAO JO 7110.65, Para 2 −4−20, Aircraft Identification.
F AAO JO 7610.4, Chapter 12, Section 10, USAF UndergraduateFlying Training (UFT)/Pilot Instructor Training (PIT)/Introduction To
Fighter Fundamentals.
2−3−8. AIRCRAFT EQUIPMENT SUFFIX
a.Indicate, for both VFR and IFR operations, the
aircraft’s radar transponder, DME, or navigation
capability by adding the appropriate symbol,
preceded by a slant. (See TBL 2 −3−10.)
b.GNSS-equipped aircraft:
1.Have an equipment suffix of /G, /L, /S, or /V .
2.May be determined by executing an ICAO
flight plan readout and verifying a filed “G” in theICAO equipment list.
3.May be determined by verifying with the pilot
that the aircraft is GNSS-equipped.
c.When forwarding this information, state the
aircraft type followed by the word “slant” and the
appropriate phonetic letter equivalent of the suffix.
EXAMPLE −
“Cessna Three −ten slant T ango.”
“A−T en slant November.”
“F−Sixteen slant Papa.”
“Seven−sixty−seven slant Golf.”
d.Utilize aircraft equipment suffix /O to indicate
“RVSM−capable, no transponder.”
NOTE−
/O is for ATC use only. Users are not authorized to file this
suffix.
2−3−9. CLEARANCE STATUS
Use an appropriate clearance symbol followed by a
dash (−) and other pertinent information to clearly
show the clearance status of an aircraft. To indicate
delay status use:
a.The symbol “H” at the clearance limit when
holding instructions have been included in the
aircraft’s original clearance. Show detailed holding
information following the dash when holding differs
from the established pattern for the fix; i.e., turns, leg
lengths, etc.
b.The symbols “F” or “O” to indicate the
clearance limit when a delay is not anticipated.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−3−11 Flight Progress StripsTBL 2−3−10
Aircraft Equipment Suffixes
Navigation Capability Transponder Capability
Suffix
RVSMAnyFailed transponder or Failed Mode
C capability /H
No GNSS, No RNA VTransponder with Mode C/W
RNA V , No GNSSTransponder with Mode C/Z
GNSSTransponder with Mode C/L
No RVSMNo DMENo transponder /X
Transponder with no Mode C /T
Transponder with Mode C /U
DMENo transponder /D
Transponder with no Mode C /B
Transponder with Mode C /A
TACANNo transponder /M
Transponder with no Mode C /N
Transponder with Mode C /P
RNA V ,
No GNSSNo transponder /Y
Transponder with no Mode C /C
Transponder with Mode C /I
GNSSNo transponder /V
Transponder with no Mode C /S
Transponder with Mode C /G
JO 7110.65W 12/10/15
2−3−12 Flight Progress Strips2−3−10. CONTROL SYMBOLOGY
Use authorized control and clearance symbols or
abbreviations for recording clearances, reports, and
instructions. Control status of aircraft must always be
current. You may use:
a.Plain language markings when it will aid in
understanding information.
b.Locally approved identifiers. Use these only
within your facility and not on teletypewriter or
interphone circuits.
c.Plain sheets of paper or locally prepared forms
to record information when flight progress strips are
not used. (See TBL 2 −3−11 and TBL 2 −3−12.)
d.Control Information Symbols.
(See FIG 2−3−7 and FIG 2−3−8.)
REFERENCE −
F AAO JO 7110.65, Para 4 −5−3, Exceptions.
TBL 2−3−11
Clearance Abbreviations
Abbreviation Meaning
A Cleared to airport (point of intended
landing)
B Center clearance delivered
C ATC clears (when clearance relayedthrough non −ATC facility)
CAF Cleared as filed
D Cleared to depart from the fix
F Cleared to the fix
H Cleared to hold and instructions issued
L Cleared to land
N Clearance not delivered
O Cleared to the outer marker
PD Cleared to climb/descend at pilot’s
discretion
Q Cleared to fly specified sectors of aNA V AID defined in terms of courses,
bearings, radials or quadrants within adesignated radius.
T Cleared through (for landing and takeoff
through intermediate point)
V Cleared over the fix
X Cleared to cross (airway, route, radial) at(point)
Z Tower jurisdictionTBL 2−3−12
Miscellaneous Abbreviations
Abbreviation Meaning
BC Back course approach
CT Contact approach
FA Final approach
FMS Flight management system approach
GPS GPS approach
I Initial approach
ILS ILS approach
MA Missed approach
NDB Nondirectional radio beacon approach
OTP VFR conditions −on−top
PA Precision approach
PT Procedure turn
RA Resolution advisory (Pilot reported
TCAS event)
RH Runway heading
RNA V Area navigation approach
RP Report immediately upon passing(fix/altitude)
RX Report crossing
SA Surveillance approach
SI Straight−in approach
TA TACAN approach
TL Turn left
TR Turn right
VA Visual approach
VR VOR approach3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−3−13 Flight Progress StripsFIG 2−3−7
Control Information Symbols [Part 1]
JO 7110.65W 12/10/15
2−3−14 Flight Progress StripsFIG 2−3−8
Control Information Symbols [Part 2]
JO 7110.65W 12/10/15
2−4−1 Radio and Interphone CommunicationsSection 4. Radio and Interphone Communications
2−4−1. RADIO COMMUNICATIONS
Use radio frequencies for the special purposes for
which they are intended. A single frequency may be
used for more than one function except as follows:
TERMINAL. When combining positions in the tower,
do not use ground control frequency for airborne
communications.
NOTE−
Due to the limited number of frequencies assigned to
towers for the ground control function, it is very likely that
airborne use of a ground control frequency could causeinterference to other towers or interference to your air craft
from another tower. When combining these functions, it is
recommended combining them on local control. The ATIS
may be used to specify the desired frequency.
2−4−2. MONITORING
Monitor interphones and assigned radio frequencies
continuously.
NOTE−
Although all F AA facilities, including RAPCONs and
RATCFs, are required to monitor all assigned fr equencies
continuously, USAF facilities may not monitor allunpublished discrete frequencies.
2−4−3. PILOT ACKNOWLEDGMENT/READ
BACK
Ensure pilots acknowledge all Air Traffic Clearances
and A TC Instructions. When a pilot reads back an Air
Traffic Clearance or ATC Instruction:
a.Ensure that items read back are correct.
b.Ensure the read back of hold short instructions,
whether a part of taxi instructions or a LAHSO
clearance.
c.Ensure pilots use call signs and/or registration
numbers in any read back acknowledging an AirTraffic Clearance or ATC Instruction.
NOTE−
1. ATC Clearance/Instruction Read Back guidance for
pilots in the AIM states:
a. Although pilots should read back the “numbers,” unless
otherwise required by procedure or controller request,pilots may acknowledge clearances, control instructions,
or other information by using “Wilco,” “Roger,”“Affirmative,” or other words or remarks with theiraircraft identification.
b. Altitudes contained in charted procedures, such as
departure procedures, instrument approaches, etc., neednot be read back unless they are specifically stated by thecontroller. c. Initial read back of a taxi, departure or landing
clearance should include the runway assignment,
including left, right, center, etc. if applicable.2. Until a pilot acknowledges a controller’ s clearance or
instruction, a controller cannot know if a pilot will comply
with the clearance or remain as previously cleared.
EXAMPLE −
“Climbing to Flight Level three three zero, United T welve”
or “November Five Charlie Tango, roger, cleared to landrunway four left.”
REFERENCE −
P/CG Term – Air Traffic ClearanceP/CG Term – ATC Instructions
JO 7110.65, 3-7-2. Taxi and Ground Movement Operations
JO 7110.65, 10-4-4. Communications Failure
AIM Para 4-2-3, Contact Procedures
AIM Para 4-4-7 Pilot Responsibility upon Clearance IssuanceAIM Para 6-4-1, Two-way Radio Communications Failure
Federal Register, April 1, 1999 14 CFR Part 91 Pilot Responsibility for
Compliance with ATC Clearances and Instructions
2−4−4. AUTHORIZED INTERRUPTIONS
As necessary, authorize a pilot to interrupt his/her
communications guard.
NOTE−
Some users have adopted pr ocedures to ensure uninterrup-
ted receiving capability with ATC when a pilot with onlyone operative communications radio must interrupthis/her communications guard because of a safety related
problem requiring airborne communications with his/her
company. In this event, pilots will request approval toabandon guard on the assigned ATC frequency for amutually agreeable time period. Additionally, they willinform controllers of the NAVAID voice facility and the
company frequency they will monitor.
2−4−5. AUTHORIZED TRANSMISSIONS
Transmit only those messages necessary for air traffic
control or otherwise contributing to air safety.
REFERENCE −
FAAO JO 7210.3, Para 3 −2−2, Authorized Messages Not Directly
Associated with Air Traffic Services.
JO 7110.65W 12/10/15
2−4−2 Radio and Interphone Communications2−4−6. FALSE OR DECEPTIVE
COMMUNICATIONS
Take action to detect, prevent, and report false,
deceptive, or phantom controller communications toan aircraft or controller. The following must be
accomplished when false or deceptive communica-
tions occur:
a.Correct false information.
b.Broadcast an alert to aircraft operating on all
frequencies within the area where deceptive orphantom transmissions have been received.
EXAMPLE −
“Attention all aircraft. False ATC instructions have beenreceived in the area of Long Beach Airport. Exerciseextreme caution on all frequencies and verify
instructions.”
c.Collect pertinent information regarding the
incident.
d.Notify the operations supervisor of the false,
deceptive, or phantom tran smission and report all
relevant information pertaining to the incident.
2−4−7. AUTHORIZED RELAYS
a.Relay operational information to aircraft or
aircraft operators as necessary. Do not agree to handle
such messages on a regular basis. Give the source of
any such message you relay.
b.Relay official FAA messages as required.
NOTE−
The F AA Administrator and Deputy Administrator willsometimes use code phrases to identify themselves in
air-to-ground communications as follows:
Administrator: “SAFEAIR ONE.”Deputy Administrator: “SAFEAIR TWO.”
EXAMPLE −
“Miami Center, Jetstar One, this is SAFEAIR ONE,
(message).”
c.Relay operational information to military
aircraft operating on, or planning to operate on IRs.
2−4−8. RADIO MESSAGE FORMAT
Use the following format for radio communications
with an aircraft:
a.Sector/position on initial radio contact:
1.Identification of aircraft.2.Identification of ATC unit.
3.Message (if any).
4.The word “over” if required.
b.Subsequent radio transmissions from the same
sector/position must use the same format, except the
identification of the ATC unit may be omitted.
TERMINAL. You may omit aircraft identification
after initial contact when conducting the final portion
of a radar approach.
REFERENCE −
F AAO JO 7110.65, Para 2 −4−20, Aircraft Identification.
2−4−9. ABBREVIATED TRANSMISSIONS
Transmissions may be abbreviated as follows:
a.Use the identification prefix and the last 3 digits
or letters of the aircraft identification after
communications have been established. Do not
abbreviate similar sounding aircraft identifications or
the identification of an air carrier or other civil aircraft
having an FAA authorized call sign.
REFERENCE −
F AAO JO 7110.65, Para 2 −4−20, Aircraft Identification.
b.Omit the facility identification after communi-
cation has been established.
c.Transmit the message immediately after the
callup (without waiting for the aircraft’s reply) when
the message is short and receipt is generally assured.
d.Omit the word “over” if the message obviously
requires a reply.
2−4−10. INTERPHONE TRANSMISSION
PRIORITIES
Give priority to interphone transmissions as follows:
a.First priority. Emergency messages including
essential information on aircraft accidents or
suspected accidents. After an actual emergency haspassed, give a lower priority to messages relating to
that accident.
b.Second priority. Clearances and control
instructions.
c.Third priority . Movement and control messages
using the following order of preference whenpossible:
1.Progress reports.
2.Departure or arrival reports.
JO 7110.65W 12/10/15
2−4−3 Radio and Interphone Communications3.Flight plans.
d.Fourth priority. Movement messages on VFR
aircraft.
2−4−11. PRIORITY INTERRUPTION
Use the words “emergency” or “control” for
interrupting lower priority messages when you havean emergency or control message to transmit.
2−4−12. INTERPHONE MESSAGE FORMAT
Use the following format for interphone intra/interfa-
cility communications:
a.Both the caller and receiver identify their
facility and/or position in a manner that ensures they
will not be confused with another position.
NOTE−
Other means of identifying a position, such as substituting
departure or arrival gate/fix names for position identifica-
tion, may be used. However, it must be operationallybeneficial, and the procedure fully covered in a letter of
agreement or a facility directive, as appropriate.
EXAMPLE −
Caller: “Albuquerque Center Sixty Three, Amarillo
Departure.”
Receiver: “Albuquerque Center.”
b.Between two facilities which utilize numeric
position identification, the caller must identify both
facility and position.
EXAMPLE −
Caller: “Albuquerque Sixty Three, Fort Worth Eighty
Two.”
c.Caller states the type of coordination to be
accomplished when advantageous. For example,
handoff or APREQ.
d.The caller states the message.
e.The receiver states the response to the caller’s
message followed by the receiver’s operating initials.
f.The caller states his or her operating initials.
EXAMPLE −
Caller: “Denver High, R T wenty−five.”
Receiver: “Denver High.”
Caller: “Request direct Denver for Northwest ThreeTwenty−eight.”
Receiver: “Northwest Three Twenty−eight dir ect Denver
approved. H.F .”
Caller: “G.M.”
Receiver: “Denver High, Go ahead override.”
Caller: “R Twenty −five, Request direct Denver for
Northwest Three T wenty−eight.”
Receiver: “Northwest Three Twenty−eight dir ect Denver
approved. H.F .”
Caller: “G.M.”
Caller: (“Bolos” is a departure gate in Houston ARTCC’ s
Sabine sector)−“Bolos, Houston local.”
Receiver: “Bolos.”
Caller: “Request Flight Level three five zero for American
Twenty−five.”
Receiver: “American Twenty−five Flight Level three five
zero approved, A.C.”
Caller: “G.M.”
Caller: “Sector Twelve, Ontario Approach, APREQ.”
Receiver: “Sector Twelve.”
Caller: “Cactus Five forty −two heading one three zero and
climbing to one four thousand.”
Receiver: “Cactus Five forty −two heading one three zero
and climbing to one four thousand approved. B.N.”
Caller: “A.M.”
Caller: “Zanesville, Columbus, seventy −three line,
handoff.”
Receiver: “Zanesville.”
Caller: “Five miles east of Appleton VOR, United Three
Sixty−six.”
Receiver: “United Three Sixty −six, radar contact, A.Z.”
Caller: “M.E.”
JO 7110.65W 12/10/15
2−4−4 Radio and Interphone Communicationsg.Identify the interphone voice line on which the
call is being made when two or more such lines are
collocated at the receiving operating position.
EXAMPLE −
“Washington Center, Washington Approach on the FiftySeven line.”
“Chicago Center, O’Hare Tower handoff on the Departure
West line.”
h.TERMINAL. The provisions of subparas a, b, c,
e, f, g, and para 2 −4−13, Interphone Message
Termination, may be omitted provided:
1.Abbreviated standard coordination proce-
dures are contained in a facility directive describing
the specific conditions and positions that may utilize
an abbreviated interphone message format; and
2.There will be no possibility of misunder-
standing which positions are using the abbreviated
procedures.
2−4−13. INTERPHONE MESSAGE
TERMINATION
Terminate interphone messages with your operating
initials.
2−4−14. WORDS AND PHRASES
a.Use the words or phrases in radiotelephone and
interphone communication as contained in the P/CG
or, within areas where Controller Pilot Data Link
Communications (CPDLC) is in use, the phraseology
contained in the applicable CPDLC message set.
b.The word super must be used as part of the
identification in all communications with or about
super aircraft.
c.The word heavy must be used as part of the
identification in all communications with or about
heavy aircraft.
d.EN ROUTE. The use of the words super or
heavy may be omitted except as follows:
1.In communications with a terminal facility
about super or heavy aircraft operations.
2.In communications with or about super or
heavy aircraft with regard to an airport where the en
route center is providing approach control service.3.In communications with or about super or
heavy aircraft when the separation from a following
aircraft may become less than 5 miles by approved
procedure.
4.When issuing traffic advisories.
EXAMPLE −
“United Fifty−Eight Heavy.”
NOTE−
Most airlines will use the word “super” or “heavy”
following the company prefix and flight number whenestablishing communications or when changing frequen-
cies within a
terminal facility’ s area.
e.When in radio communications with “Air Force
One” or “Air Force Two,” do not add the heavy
designator to the call sign. State only the call sign “Air
Force One/Two” regardless of the type aircraft.
2−4−15. EMPHASIS FOR CLARITY
Emphasize appropriate digits, letters, or similar
sounding words to aid in distinguishing between
similar sounding aircraft identifications.
Additionally:
a.Notify each pilot concerned when communicat-
ing with aircraft having similar sounding
identifications.
EXAMPLE −
“United Thirty −one United, Miami Center, U.S. Air
Thirty−one is also on this frequency, acknowledge.”
“U.S. Air Thirty −one U.S. Air, Miami Center, United
Thirty−one is also on this frequency, acknowledge.”
REFERENCE −
F AAO JO 7110.65, Para 2 −4−20, Aircraft Identification.
FAAO JO 7210.3, Para 2 −1−13, Air craft Identification Problems.
b.Notify the operations supervisor −in-charge of
any duplicate flight identification numbers orphonetically similar-sounding call signs when the
aircraft are operating simultaneously within the same
sector.
REFERENCE −
FAAO JO 7210.3, Para 2 −1−13, Air craft Identification Problems.
NOTE−
This is especially important when this occurs on arepetitive, rather than an isolated, basis.
JO 7110.65W 12/10/15
2−4−5 Radio and Interphone Communications2−4−16. ICAO PHONETICS
Use the ICAO pronunciation of numbers and
individual letters. (See the ICAO radiotelephony
alphabet and pronunciation in TBL 2 −4−1.)
TBL 2−4−1
ICAO Phonetics
Character Word Pronunciation
0 Zero ZE−RO
1 One WUN
2 Two TOO
3 Three TREE
4 Four FOW−ER
5 Five FIFE
6 Six SIX
7 Seven SEV−EN
8 Eight AIT
9 Nine NIN−ER
A Alfa ALFAH
B Bravo BRAH VOH
C Charlie CHAR LEE
D Delta DELL TAH
E Echo ECK OH
F Foxtrot FOKS TROT
G Golf GOLF
H Hotel HOH TELL
I India INDEE AH
J Juliett JEW LEE ETT
K Kilo KEY LOH
L Lima LEE MAH
M Mike MIKE
N November NOVEM BER
O Oscar OSS CAH
P Papa PAH PAH
Q Quebec KEH BECK
R Romeo ROW ME OH
S Sierra SEEAIRAH
T Tango TANG GO
U Uniform YOU NEE FORM
V Victor VIK TAH
W Whiskey WISS KEY
X X−ray ECK SRAY
Y Yankee YAN GKEY
Z Zulu ZOO LOO
NOTE−
Syllables to be emphasized in pronunciation are in boldface.2−4−17. NUMBERS USAGE
State numbers as follows:
a.Serial numbers. The separate digits.
EXAMPLE −
Number Statement
11,495 “One one four niner five.”
20,069 “Two zero zero six niner.”
b.Altitudes or flight levels:
1.Altitudes. Pronounce each digit in the number
of hundreds or thousands followed by the word
“hundred” or “thousand” as appropriate.
EXAMPLE −
Number Statement
10,000 “One zero thousand.”
11,000 “One one thousand.”
17,900 “One seven thousand niner
hundred.”
NOTE−
Altitudes may be restated in group form for added clarity
if the controller chooses.
EXAMPLE −
Number Statement
10,000 “Ten thousand.”
11,000 “Eleven thousand.”
17,900 “Seventeen thousand niner
hundred.”
2.Flight levels. The words “flight level”
followed by the separate digits of the flight level.
EXAMPLE −
Flight Level Statement
180 “Flight level one eight zero.”
275 “Flight level two seven five.”
3.MDA/DH Altitudes. The separate digits of
the MDA/DH altitude.
EXAMPLE −
MDA/DH Altitude Statement
1,320 “Minimum descent altitude,
one three two zero.”
486 “Decision height, four eightsix.”
JO 7110.65W 12/10/15
2−4−6 Radio and Interphone Communicationsc.Time:
1.General time information. The four separate
digits of the hour and minute/s in terms of UTC.
EXAMPLE −
UTC Time (12 hour) Statement
0715 1:15 a.m. CST “Zero seven one five.”
1915 1:15 p.m. CST “One niner one five.”
2.Upon request. The four separate digits of the
hours and minute/s in terms of UTC followed by the
local standard time equivalent; or the local timeequivalent only. Local time may be based on the
24−hour clock system, and the word “local” or the
time zone equivalent must be stated when other thanUTC is referenced. The term “ZULU” may be used
to denote UTC.
EXAMPLE −
UTC Time
(24 hour)Time
(12 hour)Statement
2230 1430 PST 2:30 p.m. “Two two three zero,one four three zero
Pacific or Local.” or“Two−thirty P−M.”
3.Time check. The word “time” followed by the
four separate digits of the hour and minutes, and
nearest quarter minute. Fractions of a quarter minute
less than eight seconds are stated as the preceding
quarter minute; fractions of a quarter minute of eight
seconds or more are stated as succeeding quarterminute.
EXAMPLE −
Time Statement
1415:06 “Time, one four one five.”
1415:10 “Time, one four one five and
one−quarter.”
4.Abbreviated time. The separate digits of the
minutes only.
EXAMPLE −
Time Statement
1415 “One five.”
1420 “Two zero.”d.Field elevation. The words “field elevation”
followed by the separate digits of the elevation.
EXAMPLE −
Elevation Statement
17 feet “Field elevation, one seven.”
817 feet “Field elevation, eight one seven.”
2,817 feet “Field elevation, two eight one seven.”
e.The number “0” as “zero” except where it is
used in approved “group form” for authorized aircraft
call signs, and in stating altitudes.
EXAMPLE −
As Zero As Group
“Field elevation one six zero.”
“Heading three zero zero.”
“One zero thousand fivehundred.”“Western five thirty.”
“EMAIR One Ten.”
“Ten thousand five hundred.”
f.Altimeter setting. The word “altimeter” fol-
lowed by the separate digits of the altimeter setting.
EXAMPLE −
Setting Statement
30.01 “Altimeter, three zero zero one.”
g.Surface wind. The word “wind” followed by the
separate digits of the indicated wind direction to the
nearest 10 −degree multiple, the word “at” and the
separate digits of the indicated velocity in knots, toinclude any gusts.
EXAMPLE −
“Wind zero three zero at two five.”
“Wind two seven zero at one five gusts three five.”
h.Heading. The word “heading” followed by the
three separate digits of the number of degrees,
omitting the word “degrees.” Use heading360 degrees to indicate a north heading.
EXAMPLE −
Heading Statement
5 degrees “Heading zero zero five.”
30 degrees “Heading zero three zero.”
360 degrees “Heading three six zero.”
JO 7110.65W 12/10/15
2−4−7 Radio and Interphone Communicationsi.Radar beacon codes. The separate digits of the
4−digit code.
EXAMPLE −
Code Statement
1000 “One zero zero zero.”
2100 “Two one zero zero.”
j.Runways. The word “runway,” followed by the
separate digits of the runway designation. For a
parallel runway, state the word “left,” “right,” or“center” if the letter “L,” “R,” or “C” is included in the
designation.
EXAMPLE −
Designation Statement
3 “Runway Three.”
8L “Runway Eight Left.”
27R “Runway Two Seven Right.”
k.Frequencies.
1.The separate digits of the frequency , inserting
the word “point” where the decimal point occurs.
(a)Omit digits after the second digit to the
right of the decimal point.
(b)When the frequency is in the L/MF band,
include the word “kiloHertz.”
EXAMPLE −
Frequency Statement
126.55 MHz “One two six point five five.”
369.0 MHz “Three six niner point zero.”
121.5 MHz “One two one point five.”
135.275 MHz “One three five point two seven.”
302 kHz “Three zero two kiloHertz.”
2.USAF/USN. Local channelization numbers
may be used in lieu of frequencies for locally based
aircraft when local procedures are established to
ensure that local aircraft and ATC facilities use thesame channelization.
EXAMPLE −
Frequency Statement
275.8 MHz “Local channel one six.”3.Issue TACAN frequencies by stating the
assigned two − or three−digit channel number.
l.Speeds.
1.The separate digits of the speed followed by
“knots” except as required by para 5 −7−2, Methods.
EXAMPLE −
Speed Statement
250 “Two five zero knots.”
190 “One niner zero knots.”
2.The separate digits of the Mach number
preceded by “Mach.”
EXAMPLE −
Mach Number Statement
1.5 “Mach one point five.”
0.64 “Mach point six four.”
0.7 “Mach point seven.”
m.Miles. The separate digits of the mileage
followed by the word “mile.”
EXAMPLE −
“Three zero mile arc east of Nottingham.”
“Traffic, one o’clock, two five miles, northbound, D −C
Eight, flight level two seven zero.”
2−4−18. NUMBER CLARIFICATION
a.If deemed necessary for clarity, and after stating
numbers as specified in para 2 −4−17, Numbers
Usage, controllers may restate numbers using either
group or single-digit form.
EXAMPLE −
“One Seven Thousand, Seventeen Thousand.”“Altimeter Two Niner Niner Two, Twenty Nine Ninety
Two.”
“One Two Six Point Five Five, One T wenty Six Point Fifty
Five.”5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−4−8 Radio and Interphone Communications2−4−19. FACILITY IDENTIFICATION
Identify facilities as follows:
a.Airport traffic control towers. State the name of
the facility followed by the word “tower.” Where
military and civil airports are located in the same
general area and have similar names, state the nameof the military service followed by the name of the
military facility and the word “tower.”
EXAMPLE −
“Columbus Tower.”
“Barksdale Tower.”“Navy Jacksonville Tower.”
b.Air route traffic control centers. State the name
of the facility followed by the word “center.”
c.Approach control facilities, including
RAPCONs, RA TCFs, and ARACs. State the name of
the facility followed by the word “approach.” Where
military and civil facilities are located in the samegeneral area and have similar names, state the name
of the military service followed by the name of the
military facility and the word “approach.”
EXAMPLE −
“Denver Approach.”“Griffiss Approach.”“Navy Jacksonville Approach.”
d.Functions within a terminal facility. State the
name of the facility followed by the name of the
function.
EXAMPLE −
“Boston Departure.”“LaGuardia Clearance Delivery.”“O’Hare Ground.”
e.When calling or replying on an interphone line
which connects only two non −VSCS equipped
facilities, you may omit the facility name.
EXAMPLE −
“Bradford High, Handoff.”
f.FAA flight service stations. State the name of the
station followed by the word “radio.”
EXAMPLE −
“Altoona Radio.”
g.Radar facilities having ASR or PAR but not
providing approach control service. State the name
of the facility, followed by the letters “G −C−A.”
EXAMPLE −
“Corpus Christi G−C−A.”
“Davison G −C−A.”2−4−20. AIRCRAFT IDENTIFICATION
Use the full identification in reply to aircraft with
similar sounding identifications. For other aircraft,the same identification may be used in reply that the
pilot used in his/her initial callup except use the
correct identification after communications havebeen established. Identify aircraft as follows:
a.U.S. registry aircraft. State one of the following:
REFERENCE −
F AAO JO 7110.65, Para 2 −4−8, Radio Message Format.
F AAO JO 7110.65, Para 2 −4−9, Abbreviated Transmissions.
F AAO JO 7110.65, Para 2 −4−15, Emphasis for Clarity.
F AAO JO 7110.65, Para 2 −4−17, Numbers Usage.
1.Civil. State the prefix “November” when
establishing initial communications with U.S.registered aircraft followed by the ICAO phonetic
pronunciation of the numbers/letters of the aircraft
registration. The controller may state the aircrafttype, the model, the manufacturer’s name, followed
by the ICAO phonetic pronunciation of the
numbers/letters of the aircraft registration if used bythe pilot on the initial or subsequent call.
EXAMPLE −
Air traffic controller’ s initiated call:
“November One Two Three Four Golf.”
“November One Two Three Four.”
Responding to pilot’ s initial or subsequent call:
“Jet Commander One Two Three Four Papa.”
“Bonanza One Two Three Four Tango.”“Sikorsky Six Three Eight Mike Foxtrot.”
NOTE−
If aircraft identification becomes a problem when the
procedures specified above are used, the call sign must be
restated after the flight number of the aircraft involved.
EXAMPLE −
“American Five Twenty−One American.”
“Commuter Six Eleven Commuter.”“General Motors Thirty −Seven General Motors.”
REFERENCE −
FAAO JO 7210.3, Para 2 −1−13, Air craft Identification Problems.
2.Air carrier and other civil aircraft having FAA
authorized call signs. State the call sign followed bythe flight number in group form.
NOTE−
“Group form” is the pronunciation of a series of numbers
as the whole number, or pairs of numbers they represent
rather than pronouncing each separate digit. The use of
group form may, however, be negated by four-digitidentifiers or the placement of zeros in the identifier.
JO 7110.65W 12/10/15
2−4−9 Radio and Interphone CommunicationsEXAMPLE −
“American Fifty −Two.”
“Delta One Hundred.”“Eastern Metro One Ten.”
“General Motors Thirty Fifteen.”
“United One Zero One.”“Delta Zero One Zero.”“TWA Ten Zero Four.”
NOTE−
Air carrier and other civil aircraft having F AA authorizedcall signs may be pronounced using single digits ifnecessary for clarity.
EXAMPLE −
“United Five One Seven.”
“United Five Seven Zero.”
3.Air taxi and commercial operators not having
FAA authorized call signs. State the prefix “T ANGO”
on initial contact, if used by the pilot, followed by the
registration number. The prefix may be dropped insubsequent communications.
EXAMPLE −
“Tango Mooney Five Five Five Two Quebec.”
“Tango November One Two Three Four.”
4.Air carrier/taxi ambulance. State the prefix
“MEDEV AC” if used by the pilot, followed by the
call sign and flight number in group form.
EXAMPLE −
“MEDEVAC Delta Fifty-One.”
5.Civilian air ambulance. State the word
“MEDEVAC” followed by the numbers/letters of the
registration number.
EXAMPLE −
“MEDEVAC Two Six Four Six.”
6.U.S. military. State one of the following:
(a)The service name, followed by the word
“copter,” when appropriate, and the last 5 digits of the
serial number.
EXAMPLE −
“Navy Five Six Seven One Three.”“Coast Guard Six One Three Two Seven.”“Air Guard One Three Five Eight Six.”
“Army Copter Three Two One Seven Six.”
NOTE−
If aircraft identification becomes a problem, the
procedures reflected in F AAO JO 7210.3, Facility
Operation and Administration, para 2 −1−13, Aircraft
Identification Problems, will apply.(b)Special military operations. State one of
the following followed by the last 5 digits of the serial
number:
(c)Air evacuation flights. “AIR EV AC,”
“MARINE AIR EV AC,” or “NA VY AIR EV AC.”
EXAMPLE −
“Air Evac One Seven Six Five Two.”
(d)Rescue flights. (Service name)
“RESCUE.”
EXAMPLE −
“Air Force Rescue Six One Five Seven Niner.”
(e)Air Mobility Command. “REACH.”
EXAMPLE −
“Reach Seven Eight Five Six Two.”
(f)Special Air Mission. “SAM.”
EXAMPLE −
“Sam Niner One Five Six Two.”
(g)USAF Contract Aircraft “LOGAIR.”
EXAMPLE −
“Logair Seven Five Eight Two Six.”
(h)Military tactical and training:
(1)U.S. Air Force, Air National Guard,
Military District of Washington priority aircraft, andUSAF civil disturbance aircraft. Pronounceable
words of 3 to 6 letters followed by a 1 to 5 digit
number.
EXAMPLE −
“Paul Two Zero.”“Pat One Five Seven.”“Gaydog Four.”
NOTE−
When the “Z” suffix described in para 2 −3−7, USAF/USN
Undergraduate Pilots, is added to identify aircraft piloted
by USAF undergraduate pilots, the call sign will be limitedto a combination of six characters.
(2)Navy or Marine fleet and training
command aircraft. The service name and 2 letters, or
a digit and a letter (use letter phonetic equivalents),followed by 2 or 3 digits.
EXAMPLE −
“Navy Golf Alfa Two One.”“Marine Four Charlie Two Three Six.”
7.Presidential aircraft and Presidential family
aircraft:
(a)When the President is aboard a military
aircraft, state the name of the military service,
followed by the word “One.”
JO 7110.65W 12/10/15
2−4−10 Radio and Interphone CommunicationsEXAMPLE −
“Air Force One.”“Army One.”“Marine One.”
(b)When the President is aboard a civil
aircraft, state the words “Executive One.”
(c)When a member of the President’s family
is aboard any aircraft, if the U.S. Secret Service or the
White House Staff determines it is necessary, state the
words “Executive One Foxtrot.”
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
8.Vice Presidential aircraft:
(a)When the Vice President is aboard a
military aircraft, state the name of the military
service, followed by the word “Two.”
EXAMPLE −
“Air Force Two.”“Army Two.”
“Marine Two.”
(b)When the Vice President is aboard a civil
aircraft, state the words “Executive Two.”
(c)When a member of the Vice President’s
family is aboard any aircraft, if the U.S. Secret
Service or the White House Staff determines it isnecessary, state the words “Executive Two Foxtrot.”
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
9.DOT and FAA flights. The following
alphanumeric identifiers and radio/interphone call
signs are established for use in air/ground communi-
cations when the Secretary of T ransportation, Deputy
Secretary of Transportation, FAA Administrator orFAA Deputy Administrator have a requirement to
identify themselves. (See TBL 2 −4−2.)
TBL 2−4−2
DOT and FAA Alphanumeric Identifiers
and Call Signs
Official Identifier Call Sign
Secretary of Transportation DOT−1Transport −1
Deputy Secretary of
TransportationDOT−2Transport −2
Administrator,
Federal Aviation AdministrationFAA−1 Safeair−1
Deputy Administrator,
Federal Aviation AdministrationFAA−2 Safeair−2
10.Other Special Flights.(a)Department of Energy flights. State the
letters “R −A−C” (use phonetic alphabet equivalents)
followed by the last 4 separate digits of the aircraft
registration number.
EXAMPLE −
“Romeo Alfa Charlie One Six Five Three.”
(b)Flight Inspection of navigational aids.
State the call sign “FLIGHT CHECK” followed bythe digits of the registration number.
EXAMPLE −
“Flight Check Three Niner Six Five Four.”
(c)USAF aircraft engaged in aerial sampling
missions. State the call sign “SAMP” followed by the
last three digits of the serial number.
EXAMPLE −
“SAMP Three One Six.”
REFERENCE −
F AAO JO 7110.65, Para 9 −2−17, SAMP .
11.Use a pilot’s name in identification of an
aircraft only in special or emergency situations.
b.Foreign registry. State one of the following:
1.Civil. State the aircraft type or the manufac-
turer’s name followed by the letters/numbers of the
aircraft registration, or state the letters or digits of the
aircraft registration or call sign.
EXAMPLE −
“Stationair F −L−R−B.”
“C−F−L−R−B.”
NOTE−
Letters may be spoken individually or phonetically.
2.Air carrier. The abbreviated name of the
operating company followed by the letters or digits of
the registration or call sign.
EXAMPLE −
“Air France F−L−R−L−G.”
3.The flight number in group form, or you may
use separate digits if that is the format used by the
pilot.
EXAMPLE −
“Scandinavian Sixty−eight.”
“Scandinavian Six Eight.”
4.Foreign Military. Except for military
services identified in FAA Order JO 7340.2,
Contractions, the name of the country and the m ilitary
service followed by the separate digits or letters of the
registration or call sign. For military services listed
in FAA Order JO 7340.2, the approved telephony
followed by the separate digits of the serial number.
JO 7110.65W 12/10/15
2−4−11 Radio and Interphone CommunicationsEXAMPLE −
“Canforce Five Six Two Seven.”“Brazilian Air Force Five Three Two Seven Six.”
2−4−21. DESCRIPTION OF AIRCRAFT
TYPES
Except for super and heavy aircraft, describe aircraft
as follows when issuing traffic information.
a.Military:
1.Military designator, with numbers spoken in
group form, or
2.Service and type, or
3.Type only if no confusion or misidentifica-
tion is likely.
b.Air Carrier:
1.Manufacturer’s model or type designator.
2.Add the manufacturer’s name, company
name or other identifying features when confusion or
misidentification is likely.
EXAMPLE −
“L−Ten−Eleven.”
“American MD −Eighty. Seven Thirty −Seven.”
“Boeing Seven Fifty −Seven.”
NOTE−
Pilots of “inter change” aircraft are expected to inform the
tower on the first radio contact the name of the operatingcompany and trip number followed by the company name,
as displayed on the aircraft, and the aircraft type.
c.General Aviation and Air Taxi:
1.Manufacturer’s model or type designator.2.Manufacturer’s name, or add color when
considered advantageous.
EXAMPLE −
“Tri−Pacer.”
“P A Twenty −Two.”
“Cessna Four −Oh−One.”
“Blue and white King Air.”
“Airliner.”
“Sikorsky S −Seventy−Six.”
d.When issuing traffic information to aircraft
following a super aircraft, specify the word s uper
before the manufacturer’s name and model.
e.When issuing traffic information to aircraft
following a heavy aircraft, specify the word heavy
before the manufacturer’s name and model.
EXAMPLE −
“Super A-Three-Eighty” or “Super
A-three-eighty-eight.”
“Heavy C-Seventeen.”
“Heavy Boeing Seven Forty-Seven.”
REFERENCE −
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
2−4−22. AIRSPACE CLASSES
A, B, C, D, E, and G airspace are pronounced in the
ICAO phonetics for clarification. The term “Class”
may be dropped when referring to airspace inpilot/controller communications.
EXAMPLE −
“Cessna 123 Mike Romeo cleared to enter Bravo
airspace.”
“Sikorsky 123 Tango Sierra cleared to enter New YorkBravo airspace.”
JO 7110.65W 12/10/15
2−5−1 Route and NA V AID DescriptionSection 5. Route and NAVAID Description
2−5−1. AIR TRAFFIC SERVICE (ATS)
ROUTES
Describe ATS routes as follows:
a.VOR/VORTAC/TACAN airways or jet routes.
State the word “Victor” or the letter “J” followed by
the number of the airway or route in group form.
EXAMPLE −
“Victor Twelve.”“J Five Thirty −Three.”
b.VOR/VORTAC/TACAN alternate airways.
State the word “V ictor” followed by the number of the
airway in group form and the alternate direction.
EXAMPLE −
“Victor Twelve South.”
c.Colored/L/MF airways. State the color of the
airway followed by the number in group form.
EXAMPLE −
“Blue Eighty−One.”
d.Named Routes. State the words “North
American Route” or “Bahama Route” followed bythe number of the route in group form.
EXAMPLE −
“North American Route Sixty −Seven Bravo.”
“Bahama Route Fifty −Five V ictor.”
e.Air Traffic Service (ATS) routes. State the
letter(s) of the route phonetically, followed by the
number of the route in group form.
EXAMPLE −
“Romeo Twenty.”
“Alfa Fifty.”“Golf Sixty −one.”
“Alfa Seven Hundred.”
f.Military Training Routes (MTRs). State the
letters “I−R” or “V−R” followed by the number of the
route in group form.
EXAMPLE −
“I−R Five Thirty −one.”
“V−R Fifty−two.”
g.Published RNA V routes.
1.High Altitude − State the letter “Q” followed
by the route number in group form.EXAMPLE −
“Q One Forty −five.”
2.Low Altitude − State the letter of the route
phonetically, followed by the number of the route ingroup form.
EXAMPLE −
“Tango Two Ten.”
2−5−2. NAVAID TERMS
a.Describe NA V AIDs as follows:
1.State the name or phonetic alphabet equival-
ent (location identifier) of a NA V AID when using it
in a routing.
EXAMPLE −
“V6 Victor Whiskey Victor (Waterville) V45 Jackson”
2.When util ized as the clearance limit, state the
name of the NA V AID followed by the type of
NA V AID if the type is known.
PHRASEOLOGY −
CLEARED TO (NAVAID name and type)
EXAMPLE −
“Cleared to Grand Rapids VOR”
b.Describe radials, arcs, courses, bearings, and
quadrants of NA V AIDs as follows:
1.VOR/VORTAC/TACAN/GPS Waypoint.
State the name of the NA V AID or GPS Waypoint
followed by the separate digits of the radial/azimuth/
bearing (omitting the word “degrees”) and the word
“radial/azimuth/bearing.”
EXAMPLE −
“Appleton Zero Five Zero Radial.”
2.Arcs about VOR-DME/VORTAC/TACAN
NA V AIDs. State the distance in miles from the
NA V AID followed by the words “mile arc,” the
direction from the NA V AID in terms of the eight
principal points of the compass, the word “of,” andthe name of the NA V AID.
EXAMPLE −
“Two Zero mile arc southwest of Kirksville VOR”
3.Quadrant within a radius of NA V AID. State
direction from NA V AID in terms of the quadrant;
e.g., NE, SE, SW, NW, followed by the distance inmiles from the NA V AID.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−5−2 Route and NA V AID DescriptionEXAMPLE −
“Cleared to fly northeast quadrant of PhillipsburgVORTAC within Four Zero mile radius.”
REFERENCE −
F AAO JO 7110.65, Para 4 −4−1, Route Use.
P/CG Term − Quadrant.
4.Nondirectional beacons. State the course to
or the bearing from the radio beacon, omitting theword “degree,” followed by the words “course to” or
“bearing from,” the name of the radio beacon, and the
words “radio beacon.”
EXAMPLE −
“Three Four Zero bearing fr om Randolph Radio Beacon.”
5.MLS. State the azimuth to or azimuth from
the MLS, omitting the word “degree” followed by thewords “azimuth to” or “azimuth from,” the name of
the MLS, and the term MLS.
EXAMPLE −
“Two Six Zero azimuth to Linburgh Runway Two Seven
MLS.”
6.Navigation Reference System (NRS) W aypo-
int. State the single letter corresponding to the ICAO
Flight Information Region (FIR) identifier, followedby the letter corresponding to the FIR subset (ARTCC
area for the conterminous U.S.), the latitudeincrement in single digit or group form, and the
longitude increment.
EXAMPLE −
“Kilo Delta Three Four Uniform.”
“Kilo Delta Thirty Four Uniform.”
2−5−3. NAVAID FIXES
Describe fixes determined by reference to a
radial/localizer/azimuth and distance from a
VOR-DME/VORTAC/TACAN/ILS-DME as
follows:
a.When a fix is not named, state the name of the
NA V AID followed by a specified radial/localizer/
azimuth, and state the distance in miles followed bythe phrase “mile fix.”
EXAMPLE −
“Appleton Zero Five Zero radial Three Seven mile fix.”“Reno localizer back course Four mile fix.”
b.When a fix is charted on a SID, STAR, en route
chart, or approach plate, state the name of the fix.
c.Use specific terms to describe a fix. Do not use
expressions such as “passing Victor Twelve” or
“passing J Eleven.”3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−6−1 Weather InformationSection 6. Weather Information
2−6−1. FAMILIARIZATION
Become familiar with pertinent weather information
when coming on duty, and stay aware of current
weather information needed to perform ATC duties.
2−6−2. HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE (HIWAS)
Controllers must advise pilots of hazardous weather
that may impact operations within 150 NM of their
sector or area of jurisdiction. Hazardous weather
information contained in HIW AS broadcasts includes
Airmen’s Meteorological Information (AIRMET),Significant Meteorological Information (SIGMET),
Convective SIGMET (WST), Urgent Pilot Weather
Reports (UUA), and Center Weather Advisories(CWA). Facilities must review alert messages to
determine the geographical area and operational
impact for hazardous weather information broad-casts. The broadcast is not required if aircraft on your
frequency(s) will not be affected.
a.Controllers within commissioned HIWAS areas
must broadcast a HIWAS alert on all frequencies,
except emergency frequency, upon receipt of
hazardous weather information. Controllers are
required to disseminate data based on the operational
impact on the sector or area of control jurisdiction.
NOTE−
The inclusion of the type and number of weather advisoryresponsible for the HIWAS advisory is optional.
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT . HAZARDOUS WEATHER
INFORMATION (SIGMET, Convective SIGMET,
AIRMET, Urgent Pilot Weather Report (UUA), or CenterWeather Advisory (CWA), Number or Numbers) FOR(geographical ar ea) AVAILABLE ON HIWAS OR FLIGHT
SERVICE FREQUENCIES.
b.Controllers outside of commissioned HIWAS
areas must:
1.Advise pilots of the availability of hazardous
weather advisories. Pilots requesting additional
information should be directed to contact the nearest
Flight Service.
2.Apply the same procedure when HIWAS
outlets, or outlets with radio coverage extending intoyour sector or airspace under your jurisdiction, are
out of service.
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT . HAZARDOUS WEATHER
INFORMATION FOR (geographical area) AVAILABLE
FROM FLIGHT SERVICE.
c.Terminal facilities have the option to limit
hazardous weather information broadcasts as fol-
lows: Tower cab and approach control facilities may
opt to broadcast hazardous weather information alertsonly when any part of the area described is within
50 NM of the airspace under their jurisdiction.
REFERENCE −
AIM, Chapter 7, Section 1, Meteorology, Para 7−1−5 through
Para 7−1−9.
d.EN ROUTE. ERAM. Controllers must
electronically acknowledge hazardous weather
information messages after appropriate action has
been taken.
NOTE−
EN ROUTE. While hazardous weather information is
commonly distributed via the SIGMET View, it is possible
to receive the information via the GI View.
2−6−3. PIREP INFORMATION
Significant PIREP information includes reports of
strong frontal activity, squall lines, thunderstorms,
light to severe icing, wind shear and turbulence
(including clear air turbulence) of moderate or greater
intensity, volcanic eruptions and volcanic ash clouds,
detection of sulfur gases (SO 2 or H 2S) in the cabin,
and other conditions pertinent to flight safety.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−8, Low Level Wind Shear/Microburst
Advisories.F AAO JO 7210.3, Para 6 −3−1, Handling of SIGMETs, CW As, and
PIREPs.
AIM, Para 7 −5−9, Flight Operations in Volcanic Ash.
FAAO JO 7210.3, Para 10 −3−1, SIGMET and PIREP Handling.
a.Solicit PIREPs when requested or when one of
the following conditions exists or is forecast for your
area of jurisdiction:
1.Ceilings at or below 5,000 feet. These
PIREPs must include cloud base/top reports when
feasible.
TERMINAL. Ensure that at least one descent/climb-
out PIREP, including cloud base/s, top/s, and otherrelated phenomena, is obtained each hour.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−6−2 Weather InformationEN ROUTE. When providing approach control
services, the requirements stated in TERMINAL
above apply.
2.Visibility (surface or aloft) at or less than
5 miles.
3.Thunderstorms and related phenomena.
4.Turbulence of moderate degree or greater.
5.Icing of light degree or greater.
6.Wind shear.
7.V olcanic ash clouds.
NOTE−
Pilots may forward PIREPs regarding volcanic activity
using the format described in the Volcanic ActivityReporting Form (V AR) as depicted in the AIM, Appendix 2.
8.Detection of sulfur gases (SO 2 or H 2S),
associated with volcanic activity, in the cabin.
NOTE−
The smell of sulfur gases in the cockpit may indicate
volcanic activity that has not yet been detected or r eported
and/or possible entry into an ash-bearing cloud. SO 2 is
identifiable as the sharp, acrid odor of a freshly struckmatch. H
2S has the odor of rotten eggs.
9.TERMINAL. Braking Action Advisories are
in effect.
REFERENCE −
F AAO JO 7110.65, Para 3 −3−5, Braking Action Advisories.
P/CG Term − Braking Action Advisories.
b.Record with the PIREPs:
1.Time.
2.Aircraft position.
3.Type aircraft.
4.Altitude.
5.When the PIREP involves icing include:
(a)Icing type and intensity.
(b)Air temperature in which icing is
occurring.
c.Obtain PIREPs directly from the pilot, or if the
PIREP has been requested by another facility, youmay instruct the pilot to deliver it directly to that
facility.
PHRASEOLOGY −
REQUEST/SAY FLIGHT CONDITIONS.
Or if appropriate,REQUEST/SAY (specific conditions; i.e., ride, cloud,
visibility, etc.) CONDITIONS.
If necessary,
OVER (fix), or
ALONG PRESENT ROUTE,
or
BETWEEN (fix) AND (fix).
d.Handle PIREPs as follows:
1.Relay pertinent PIREP information to
concerned aircraft in a timely manner.
2.EN ROUTE. Relay all operationally signifi-
cant PIREPs to the facility weather coordinator.
3.TERMINAL. Relay all operationally signifi-
cant PIREPs to:
(a)The appropriate intrafacility positions.
(b)The FSS serving the area in which the
report was obtained.
NOTE−
The FSS is responsible for long line dissemination.
(c)Other concerned terminal or en route ATC
facilities, including non −FAA facilities.
(d)Use the word gain and/or loss when
describing to pilots the effects of wind shear on
airspeed.
EXAMPLE −
“Delta Seven T wenty−one, a Boeing Seven T wenty−seven,
previously reported wind shear, loss of Two Five knots atFour Hundred feet.”
“U.S. Air Seventy −six, a D−C Niner, previously reported
wind shear, gain of T wenty−Five knots between Niner Hun-
dred and Six Hundred feet, followed by a loss of Five Zeroknots between Five Hundred feet and the surface.”
REFERENCE −
AIM, Para 7−1−24, W ind Shear PIREPs.
2−6−4. WEATHER AND CHAFF SERVICES
a.Issue pertinent information on observed/repor-
ted weather and chaff areas by defining the area of
coverage in terms of azimuth (by referring to the
12-hour clock) and distance from the aircraft or by
JO 7110.65W 12/10/15
2−6−3 Weather Informationindicating the general width of the area and the area
of coverage in terms of fixes or distance and direction
from fixes.
NOTE−
Weather significant to the safety of aircraft includes suchconditions as funnel cloud activity, lines of thunderstorms,
embedded thunderstorms, large hail, wind shear,
microbursts, moderate to extreme turbulence (including
CAT), and light to severe icing.
REFERENCE −
AIM, Paragraph 7-1-14, ATC Inflight Weather Avoidance Assistance.
PHRASEOLOGY −
WEATHER/CHAFF AREA BETWEEN(number)O’CLOCK AND (number) O’CLOCK(number) MILES,
or
(number) MILE BAND OF WEATHER/CHAFF FROM(fix or number of miles and direction from fix) TO (fix ornumber of miles and direction from fix).
b.Inform any tower for which you provide
approach control services of observed precipitation
on radar which is likely to affect their operations.
c.Use the term “precipitation” when describing
radar−derived weather. Issue the precipitation
intensity from the lowest descriptor (LIGHT) to thehighest descriptor (EXTREME) when that informa-
tion is available. Do not use the word “turbulence” in
describing radar −derived weather.
1.LIGHT.
2.MODERATE.
3.HEA VY .
4.EXTREME.
NOTE−
Weather and Radar Processor (WARP) does not displaylight intensity.
PHRASEOLOGY −
AREA OF (Intensity) PRECIPITATION BETWEEN
(number) O’CLOCK AND (number) O’CLOCK, (number)
MILES, MOVING (direction) AT (number) KNOTS, TOPS
(altitude). AREA IS (number) MILES IN DIAMETER.
EXAMPLE −
1.“Area of extreme precipitation between eleven o’clock
and one o’clock, one zero miles moving east at two zeroknots, tops flight level three niner zero.”
2.“Area of heavy precipitation between ten o’clock and
two o’clock, one five miles. Area is two five miles in
diameter.”3.“Area of heavy to extreme precipitation between ten
o’clock and two o’clock, one five miles. Area is two fivemiles in diameter.”
REFERENCE −
P/CG Term − Precipitation Radar Weather Descriptions.
d.When precipitation intensity information is not
available.
PHRASEOLOGY −
AREA OF PRECIPITATION BETWEEN (number)O’CLOCK AND (number) O’CLOCK, (number) MILES. MOVING (direction) AT (number) KNOTS, TOPS
(altitude). AREA IS (number) MILES IN DIAMETER,
INTENSITY UNKNOWN.
EXAMPLE −
“Area of precipitation between one o’clock and threeo’clock, three five miles moving south at one five knots, tops
flight level three three zero. Area is three zero miles indiameter, intensity unknown.”
NOTE−
Phraseology using precipitation intensity descriptions is
only applicable when the radar precipitation intensityinformation is determined by NWS radar equipment orNAS ground based digitized radar equipment with weathercapabilities. T his precipitation may not reach the surface.
e.EN ROUTE. When issuing Air Route Surveil-
lance Radar (ARSR) precipitation intensity use thefollowing:
1.Describe the lowest displayable precipitation
intensity as MODERATE.
2.Describe the highest displayable
precipitation intensity as HEA VY to EXTREME.
PHRASEOLOGY −
AREA OF (Intensity) PRECIPITATION BETWEEN(number) O’CLOCK and (number) O’CLOCK, (number)
MILES, MOVING (direction) AT (number) KNOTS, TOPS
(altitude). AREA IS (number) MILES IN DIAMETER.
EXAMPLE −
1.“Area of moderate precipitation between ten o’clock
and one o’clock, three zero miles moving east at two zero
knots, tops flight level three seven zero.
2.“Area of moderate precipitation between ten o’clock
and three o’clock, two zero miles. Area is two five miles in
diameter.”
f.When operational/equipment limitations exist,
controllers must ensure that the highest availablelevel of precipitation intensity within their area of
jurisdiction is displayed.
g.When requested by the pilot, provide radar
navigational guidance and/or approve deviations
around weather or chaff areas. In areas of significant
JO 7110.65W 12/10/15
2−6−4 Weather Informationweather, plan ahead and be prepared to suggest, upon
pilot request, the use of alternative routes/altitudes.
1.An approval for lateral deviation authorizes
the pilot to maneuver left or right within the limits ofthe lateral deviation area.
REFERENCE −
AIM, Paragraph 7-1-14b, 1. (a) ATC Inflight Weather Avoidance
Assistance
2.When approving a weather deviation for an
aircraft that had previously been issued a crossing
altitude, including Climb Via or Descend Via
clearances, issue an altitude to maintain along with
the clearance to deviate. If you intend on clearing the
aircraft to resume the procedure, advise the pilot.
PHRASEOLOGY −
DEVIATION (restrictions if necessary) APPROVED,
MAINTAIN (altitude), (if applicable) EXPECT TO
RESUME (SID, STAR, etc.) AT (NAVAID, fix, waypoint)
NOTE−
After a Climb Via or Descend Via clearance has been
issued, a vector/deviation off of a SID/STAR cancels the
altitude r estrictions on the procedure. The air craft’ s Flight
Management System (FMS) may be unable to process
crossing altitude restrictions once the aircraft leaves the
SID/STAR lateral path. Without an assigned altitude, the
aircraft’ s FMS may revert to leveling off at the altitude set
by the pilot, which may be the SID/STAR’s published top or
bottom altitude.
REFERENCE −
F AAO JO 7110.65, Para 4-2-5, Route or Altitude Amendments
F AAO JO 7110.65, Para 5-6-2, Methods
3.If a pilot enters your area of jurisdiction
already deviating for weather, advise the pilot of any
additional pertinent weather which may affect hisroute.
4.If traffic and airspace (i.e., special use
airspace boundaries, LOA constraints) permit,
combine the approval for weather deviation with aclearance on course.
PHRASEOLOGY −
DEVIATION (restrictions if necessary) APPROVED,WHEN ABLE, PROCEED DIRECT (name ofNAVAID/WAYPOINT/FIX)orDEVIATION (restrictions if necessary) APPROVED,
WHEN ABLE, FLY HEADING (degrees), VECTOR TO
JOIN (airway) AND ADVISE.
EXAMPLE −
1.“Deviation twenty degrees right approved, when able
proceed direct O’Neill VORTAC and advise.” En Route: The corresponding fourth line entry is
“D20R/ONL” or “D20R/F .”
2.“Deviation 30 degrees left approved, when able fly
heading zero niner zero, vector join J324 and advise.”En Route: In this case the free text character limitation
prevents use of fourth line coordination and verbal
coordination is required.
5.If traffic or airspace prevent you from
clearing the aircraft on course at the time of the
approval for a weather deviation, instruct the pilot to
advise when clear of weather.
PHRASEOLOGY −
DEVIATION (restrictions if necessary) APPROVED,
ADVISE CLEAR OF WEATHER.
EXAMPLE −
“Deviation North of course approved, advise clear of
weather .”
En Route: In this case the corresponding fourth line entryis “DN,” and the receiving controller must provide aclearance to r ejoin the route in accordance with paragraph
2-1-15 c.
h.When a deviation cannot be approved as
requested because of traffic, take an alternate courseof action that provides positive control for traffic
resolution and satisfies the pilot’s need to avoid
weather.
PHRASEOLOGY −
UNABLE DEVIATION, FLY HEADING (heading),
ADVISE CLEAR OF WEATHER
orUNABLE DEVIATION, TURN (number of degrees)DEGREES (left or right)FOR TRAFFIC, ADVISE CLEAR
OF WEATHER,
EXAMPLE −
“Unable deviation, turn thirty degrees right
vector for
traffic, advise clear of weather.”
i.When forwarding weather deviation
information, the transferring controller must clearlycoordinate the nature of the route guidance service
being provided. This coordination should include,
but is not limited to: assigned headings, suggestedheadings, pilot-initiated deviations. Coordination can
be accomplished by: verbal, automated, or
pre-arranged procedures. Emphasis should be madebetween: controller assigned headings, suggested
headings, or pilot initiated deviations.
EXAMPLE −
“(call sign) assigned heading 330 for weather
avoidance”
“(call sign) deviating west, pilot requested …”3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−6−5 Weather InformationREFERENCE −
F AA Order JO 7110.65 2-1-14 Coordinate Use Of AirspaceF AA Order JO 7110.65 5-4-5 Transferring Controller Handoff
F AA Order JO 7110.65 5-4-6 Receiving Controller Handoff
F AA Order JO 7110.65 5-4-10 Prearranged CoordinationF AA Order JO 7110.65 5-4-11 En Route Fourth Line Data Block
Usage
j.En Route Fourth Line Data Transfer
1.The inclusion of a NA V AID, waypoint, or /F
in the fourth line data indicates that the pilot has been
authorized to deviate for weather and must rejoin the
route at the next NA VAID or waypoint in the route of
flight.
REFERENCE −
F AA Order JO 7110.65 5-4-11 En Route Fourth Line Data Block
Usage
EXAMPLE −
“Deviation twenty degrees right approved, when able
proceed direct O’Neill VORT AC and advise.” In this
case, the corresponding fourth line entry is“D20R/ONL” or “D20R/F.”
2.The absence of a NA VAID, waypoint, or /F in
the fourth line indicates that:
(a)The pilot has been authorized to deviate
for weather only, and the receiving controller must
provide a clearance to rejoin the route in accordance
with paragraph 2-1-15c.
EXAMPLE −
“Deviation twenty degrees right approved, advise
clear of weather.”
(b)The free text character limitation prevents
the use of fourth line coordination. Verbal
coordination is required.
EXAMPLE −
“Deviation 30 degrees left approved, when able fly
heading zero niner zero, vector join J324 and
advise.”
k.The supervisory traffic management
coordinator-in-charge/operations
supervisor/controller-in-charge shall verify thedigitized radar weather information by the best means
available (e.g., pilot reports, local tower personnel,
etc.) if the weather data displayed by digitized radaris reported as questionable or erroneous. Errors in
weather radar presentation shall be reported to the
technical operations technician and the air trafficsupervisor shall determine if the digitized radar
derived weather data is to be displayed and a NOTAM
distributed.NOTE−
Anomalous propagation (AP) is a natural occurrenceaffecting radar and does not in itself constitute a weathercircuit failure.
2−6−5. CALM WIND CONDITIONS
TERMINAL. Describe the wind as calm when the
wind velocity is less than three knots.
REFERENCE −
F AAO JO 7110.65, Para 3 −5−3, Tailwind Components.
F AAO JO 7110.65, Para 3 −10−4, Intersecting Runway/Intersecting
Flight Path Separation.
2−6−6. REPORTING WEATHER
CONDITIONS
a.When the prevailing visibility at the usual point
of observation, or at the tower level, is less than
4 miles, tower personnel must take prevailingvisibility observations and apply the observations as
follows:
1.Use the lower of the two observations (tower
or surface) for aircraft operations.
2.Forward tower visibility observations to the
weather observer.
3.Notify the weather observer when the tower
observes the prevailing visibility decrease to less than
4 miles or increase to 4 miles or more.
b.Forward current weather changes to the
appropriate control facility as follows:
1.When the official weather changes to a
condition which is below 1,000 −foot ceiling or below
the highest circling minimum, whichever is greater,
or less than 3 miles visibility, and when it improvesto a condition which is better than those above.
2.Changes which are classified as special
weather observations during the time that weather
conditions are below 1,000 −foot ceiling or the
highest circling minimum, whichever is greater, or
less than 3 miles visibility.
c.Towers at airports where military turbo-jet
en route descents are routinely conducted must alsoreport the conditions to the ARTCC even if it is not the
controlling facility.
d.If the receiving facility informs you that
weather reports are not required for a specific timeperiod, discontinue the reports. The time period
specified should not exceed the duration of the
receiving controller’s tour of duty.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−6−6 Weather Informatione.EN ROUTE. When you determine that weather
reports for an airport will not be required for a specific
time period, inform the FSS or tower of this
determination. The time period specified should not
exceed the duration of receiving controller’s tour ofduty.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−2, Forwarding Approach Information
by Nonapproach Control Facilities.
2−6−7. DISSEMINATING WEATHER
INFORMATION
TERMINAL. Observed elements of weather informa-
tion must be disseminated as follows:
a.General weather informa tion, such as “large
breaks in the overcast,” “visibility lowering to the
south,” or similar statements which do not includespecific values, and any elements derived directly
from instruments, pilots, or radar may be transmitted
to pilots or other A TC facilities without consulting the
weather reporting station.b.Specific values, such as ceiling and visibility,
may be transmitted if obtained by one of the
following means:
1.You are properly certificated and acting as
official weather observer for the elements being
reported.
NOTE−
USAF controllers do not serve as official weather
observers.
2.You have obtained the information from the
official observer for the elements being reported.
3.The weather report was composed or verified
by the weather station.
4.The information is obtained from an official
Automated W eather Observation System (AWOS) or
an Automated Surface Observation System (ASOS).
c.Differences between weather elements
observed from the tower and those reported by the
weather station must be reported to the officialobserver for the element concerned.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−7−1 Altimeter SettingsSection 7. Altimeter Settings
2−7−1. CURRENT SETTINGS
a.Current altimeter settings must be obtained
from direct-reading instruments or directly from
weather reporting stations.
REFERENCE −
F AAO JO 7210.3, Chapter 2, Section 10, Wind/Altimeter Information.
b.If a pilot requests the altimeter setting in
millibars, ask the nearest weather reporting station
for the equivalent millibar setting.
c.USAF/USA. Use the term “Estimated Altim-
eter” for altimeter settings reported or received asestimated.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−1, Departure Information.
F AAO JO 7110.65, Para 3 −10−1, Landing Information.
F AAO JO 7110.65, Para 4 −7−10, Approach Information.
2−7−2. ALTIMETER SETTING ISSUANCE
BELOW LOWEST USABLE FL
a.TERMINAL. Identify the source of an altimeter
setting when issued for a location other than the
aircraft’s departure or destination airport.
b.EN ROUTE. Identify the source of all altimeter
settings when issued.
PHRASEOLOGY −
(If the altimeter is one hour old or less), THE (facility name) ALTIMETER (setting).
or
(If the altimeter is more than one hour old),
THE (facility name) ALTIMETER (setting) MORE THANONE HOUR OLD.
c.Issue the altimeter setting:
1.To en route aircraft at least one time while
operating in your area of jurisdiction. Issue the setting
for the nearest reporting station along the aircraft’s
route of flight:
NOTE−
14 CFR Section 91.121(1) r equires that the pilot set his/her
altimeter to the setting of a station along his/her route offlight within 100 miles of the aircraft if one is available.
However , issuance of the setting of an adjacent station
during periods that a steep gradient exists will serve toinform the pilot of the difference between the setting he/she
is using and the pr essure in the local ar ea and better enablehim/her to choose a more advantageous setting within the
limitations of 14 CFR Section 91.121.
2.TERMINAL. To all departures. Unless spe-
cifically requested by the pilot, the altimeter settingneed not be issued to local aircraft operators who have
requested this omission in writing or to scheduled air
carriers.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−1, Departure Information.
3.TERMINAL. To arriving aircraft on initial
contact or as soon as possible thereafter. The tower
may omit the altimeter if the aircraft is sequenced or
vectored to the airport by the approach control having
jurisdiction at that facility.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−10, Approach Information.
F AAO JO 7110.65, Para 5 −10−2, Approach Information.
4.EN ROUTE. For the destination airport to
arriving aircraft, approximately 50 miles from the
destination, if an approach control facility does notserve the airport.
5.In addition to the altimeter setting provided
on initial contact, issue changes in altimeter setting to
aircraft executing a nonprecision instrument
approach as frequently as practical when the officialweather report includes the remarks “pressure falling
rapidly.”
d.If the altimeter setting must be obtained by the
pilot of an arriving aircraft from another source,
instruct the pilot to obtain the altimeter setting fromthat source.
NOTE−
1.The destination altimeter setting, whether from a local
or remote source, is the setting upon which the instrumentapproach is predicated.
2.Approach charts for many locations specify the source
of altimeter settings as non −F AA facilities, such as
UNICOMs.
e.When issuing clearance to descend below the
lowest usable flight level, advise the pilot of thealtimeter setting of the weather reporting station
nearest the point the aircraft will descend below that
flight level.
f.Department of Defense (DOD) aircraft that are
authorized to operate in restricted areas, MOAs, andATC assigned airspace areas on “single altimeter
JO 7110.65W 12/10/15
2−7−2 Altimeter Settingssettings” (CFR Exemption 2861A) , must be issued
altimeter settings in accordance with standard
procedures while the aircraft are en route to and from
the restricted areas, MOAs, and ATC assigned
airspace areas.
NOTE−
The DOD is responsible for conducting all “single
altimeter setting” operations within the boundaries of
MOAs, restricted areas, and ATCAAs. Under an LOA, the
DOD provides safe altitude clearance between DODaircraft and other aircraft operating within, above, andbelow the MOAs, restricted areas, and ATCAAs with
appropriate clearance of terrain.
REFERENCE −
F AAO JO 7610.4, Appendix 20, Grant of Exemption No. 2861A -
Single Altimeter Setting For Frequent Transit of FL180.
g.When the barometric pressure is greater than
31.00 inches Hg., issue the altimeter setting and:
1.En Route/Arrivals. Advise pilots to remain
set on altimeter 31.00 until reaching final approach
segment.
2.Departures. Advise pilots to set altimeter
31.00 prior to reaching any mandatory/crossing
altitude or 1,500 feet AGL, whichever is lower.
PHRASEOLOGY −
ALTIMETER, THREE ONE TWO FIVE, SET THREE ONEZERO ZERO UNTIL REACHING THE FINAL
APPROACH FIX.
or
ALTIMETER, THREE ONE ONE ZERO, SET
THREE ONE ZERO ZERO PRIOR TO REACHINGONE THOUSAND THREE HUNDRED.
NOTE−
1.Aircraft with Mode C altitude reporting will be
displayed on the controller’ s radar scope with a uniformaltitude offset above the assigned altitude. With an actual
altimeter of 31.28 inches Hg, the Mode C equipped air craft
will show 3,300 feet when assigned 3,000 feet. This willoccur unless local directives authorize entering thealtimeter setting 31.00 into the computer system r egardless
of the actual barometric pressure.
2.Flight Standards will implement high barometric
pressure procedures by NOTAM defining the geographic
area affected.
3.Airports unable to accurately measure barometric
pressures above 31.00 inches Hg. will report the
barometric pressure as “missing” or “in excess of31.00 inches of Hg.” Flight operations to or from those
airports are restricted to VFR weather conditions.
REFERENCE −
AIM, Para 7−2−2, Procedures.
F AAO JO 7110.65, Para 3 −10−1, Landing Information.
JO 7110.65W 12/10/15
2−8−1 Runway Visibility Reporting − TerminalSection 8. Runway Visibility Reporting − Terminal
2−8−1. FURNISH RVR/RVV VALUES
Where RVR or RVV equipment is operational,
irrespective of subsequent operation or nonoperation
of navigational or visual aids for the application of
RVR/RVV as a takeoff or landing minima, furnish the
values for the runway in use in accordance withpara 2−8−3, Terminology.
NOTE−
Readout capability of different type/m odel RVR equipment
varies. For example, older equipment minimum readoutvalue is 600 feet. Newer equipment may have minimumreadout capability as low as 100 feet. Readout value
increments also may differ. Older equipment have
minimum readout increments of 200 feet. New equipmentincrements below 800 feet are 100 feet.
REFERENCE −
F AAO 6560.10, Runway Visual Range (RVR).
F AAO 6750.24, Instrument Landing System (ILS) and Ancillary
Electronic Component Configuration & Perf. Req.
2−8−2. ARRIVAL/DEPARTURE RUNWAY
VISIBILITY
a.Issue current touchdown RVR/RVV for the
runway(s) in use:
1.When prevailing visibility is 1 mile or less
regardless of the value indicated.
2.When RVR/RVV indicates a reportable value
regardless of the prevailing visibility.
NOTE−
Reportable values are: RVR 6,000 feet or less;RVV 1
1/2miles or less.
3.When it is determined from a reliable source
that the indicated RVR value differs by more than
400 feet from the actual conditions within the area of
the transmissometer, the RVR data is not acceptableand must not be reported.
NOTE−
A reliable source is considered to be a certified weatherobserver , automated weather observing system, air trafficcontroller, flight service specialist, or pilot.
4.When the observer has reliable reports, or has
otherwise determined that the instrument values arenot representative of the associated runway, the data
must not be used.
b.Issue both mid-point and roll-out RVR when the
value of either is less than 2,000 feet and the
touchdown RVR is greater than the mid −point or
roll−out RVR.
c.Local control must issue the current RVR/RVV
to each aircraft prior to landing or departure in
accordance with subparas a and b.
2−8−3. TERMINOLOGY
a.Provide RVR/RVV information by stating the
runway, the abbreviation RVR/RVV , and the
indicated value. When issued along with otherweather elements, transmit these values in the normal
sequence used for weather reporting.
EXAMPLE −
“Runway One Four RVR Two Thousand Four Hundred.”
“Runway Three Two RVV Three Quarters.”
b.When two or more RVR systems serve the
runway in use, report the indicated values for thedifferent systems in terms of touchdown, mid, and
rollout as appropriate.
EXAMPLE −
“Runway Two Two Left RVR Two Thousand, rolloutOne Thousand Eight Hundred.”
“Runway Two Seven Right RVR One Thousand,
mid Eight Hundred, rollout Six Hundred.”
c.When there is a requirement to issue an RVR or
RVV value and a visibility condition greater or less
than the reportable values of the equipment isindicated, state the condition as “MORE THAN” or
“LESS THAN” the appropriate minimum or
maximum readable value.
EXAMPLE −
“Runway Three Six RVR more than Six Thousand.”
“Runway Niner RVR One Thousand, rollout less than
Six Hundred.”
JO 7110.65W 12/10/15
2−8−2 Runway Visibility Reporting − Terminald.When a readout indicates a rapidly varying
visibility condition (1,000 feet or more for RVR; one
or more reportable values for RVV), report the
current value followed by the range of visibility
variance.EXAMPLE −
“Runway Two Four RVR Two Thousand, variableOne Thousand Six Hundred to Three Thousand.”
“Runway Three One RVV Three-quarters, variable
One-quarter to One.”
REFERENCE −
F AAO JO 7110.65, Para 2 −8−1, Furnish RVR/RVV Values.
JO 7110.65W 12/10/15
2−9−1 Automatic Terminal Information Service ProceduresSection 9. Automatic Terminal Information
Service Procedures
2−9−1. APPLICATION
Use the ATIS, where available, to provide advance
noncontrol airport/terminal area and meteorologicalinformation to aircraft.
a.Identify each A TIS message by a phonetic letter
code word at both the beginning and the end of the
message. Automated systems will have the phonetic
letter code automatically appended. Exceptions maybe made where omissions are required because of
special programs or equipment.
1.Each alphabet letter phonetic word must be
used sequentially, except as authorized in subpara a2,
beginning with “Alpha,” ending with “Zulu,” andrepeated without regard to the beginning of a new
day. Identify the first resumed broadcast message
with “Alpha” or the first assigned alphabet letter
word in the event of a broadcast interruption of more
than 12 hours.
2.Specific sequential portions of the alphabet
may be assigned between facilities or an arrival anddeparture ATIS when designated by a letter of
agreement or facility directive.
REFERENCE −
FAAO JO 7210.3, Para 10 −4−1, Automatic T erminal Information
Service (ATIS).
b.The ATIS recording must be reviewed for
completeness, accuracy, speech rate, and proper
enunciation before being transmitted.
c.Arrival and departure messages, when broad-
cast separately, need only contain informationappropriate for that operation.
2−9−2. OPERATING PROCEDURES
Maintain an ATIS message that reflects the most
current arrival and departure information.
a.Make a new recording when any of the
following occur:1.Upon receipt of any new official weather
regardless of whether there is or is not a change in
values.
2.When runway braking action reports are
received that indicate runway braking is worse than
that which is included in the current ATIS broadcast.
3.When there is a change in any other pertinent
data, such as runway change, instrument approach in
use, new or canceled NOTAMs/PIREPs/HIWAS
update, etc.
b.When a pilot acknowledges that he/she has
received the ATIS broadcast, controllers may omitthose items contained in the broadcasts if they are
current. Rapidly changing conditions will be issued
by ATC, and the ATIS will contain the following:
EXAMPLE −
“Latest ceiling/visibility/altimeter/wind/(other condi-
tions) will be issued by approach control/tower.”
c.Broadcast on all appropriate frequencies to
advise aircraft of a cha nge in the A TIS code/message.
d.Controllers must ensure that pilots receive the
most current pertinent information. Ask the pilot toconfirm receipt of the current A TIS information if the
pilot does not initially state the appropriate ATIS
code. Controllers must ensure that changes topertinent operational information is provided after
the initial confirmation of ATIS information is
established. Issue the current weather, runway in use,
approach information, and pertinent NOTAMs to
pilots who are unable to receive the ATIS.
EXAMPLE −
“Verify you have information ALPHA.”
“Information BRAVO now current, visibility three miles.”
“Information CHARLIE now current, Ceiling 1500
Broken.”
“Information CHARLIE now current, advise when you
have CHARLIE.”
JO 7110.65W 12/10/15
2−9−2 Automatic Terminal Information Service Procedures2−9−3. CONTENT
Include the following in ATIS broadcast as
appropriate:
a.Airport/facility name, phonetic letter code, time
of weather sequence (UTC). Weather information
consisting of wind direction and velocity, visibility,obstructions to vision, present weather, sky condi-
tion, temperature, dew point, altimeter, a density
altitude advisory when appropriate and otherpertinent remarks included in the official weather
observation. Wind direction, velocity, and altimeter
must be reported from certified direct reading
instruments. Temperature and dew point should be
reported from certified direct reading sensors whenavailable. Always include weather observation
remarks of lightning, cumulonimbus, and towering
cumulus clouds.
NOTE−
ASOS/AWOS is to be considered the primary source ofwind direction, velocity, and altimeter data for weather
observation purposes at those locations that are so
equipped. The ASOS Operator Interface Device (OID)displays the magnetic wind as “MAG WND” in theauxiliary data location in the lower left −hand portion of the
screen. Other OID displayed winds are true and are not to
be used for operational purposes.
b.Man−Portable Air Defense Systems
(MANPADS) alert and advisory. Specify the nature
and location of threat or incident, whether reported or
observed and by whom, time (if known), andnotification to pilots to advise ATC if they need to
divert.
EXAMPLE −
1.“MANP ADS alert. Exercise extreme caution.
MANP ADS threat reported by TSA, Chicago area.”
“Advise on initial contact if you want to divert.”
2.“MANP ADS alert. Exercise extreme caution.
MANP ADS attack observed by tower one −half mile
northwest of airfield at one −two−five−zero Zulu.” “Advise
on initial contact if you want to divert.”
REFERENCE −
F AAO JO 7110.65, Para 10 −2−13, MANP ADS Alert.
FAAO JO 7210.3, Para 2 −1−9, Handling MANP ADS Incidents.
c.Terminal facilities must include reported
unauthorized laser illumination events on the ATISbroadcast for one hour following the last report.
Include the time, location, altitude, color, and
direction of the laser as reported by the pilot.PHRASEOLOGY −
UNAUTHORIZED LASER ILLUMINATION EVENT,(UTC time), (location), (altitude), (color), (direction).
EXAMPLE −
UNAUTHORIZED LASER ILLUMINATION EVENT, AT
0100z, 8 MILE FINAL RUNWAY 18R AT 3,000 FEET,
GREEN LASER FROM THE SOUTHWEST.
REFERENCE −
F AAO JO 7110.65, Para 10 −2−14, Unauthorized Laser Illumination of
Aircraft.
FAAO JO 7210.3, Para 2 −1−27, Reporting Unauthorized Laser
Illumination of Aircraft.
d.The ceiling/sky condition, visibility, and
obstructions to vision may be omitted if the ceiling is
above 5,000 feet and the visibility is more than
5 miles.
EXAMPLE −
A remark may be made, “The weather is better thanfive thousand and five.”
e.Instrument/visual approach/es in use. Specify
landing runway/s unless the runway is that to which
the instrument approach is made. Before advertising
non-precision approaches, priority should be given to
available precision, then APV approaches.
f.Departure runway/s (to be given only if dif ferent
from landing runway/s or in the instance of a
“departure only” ATIS).
g.Taxiway closures which affect the entrance or
exit of active runways, other closures which impactairport operations, other NOTAMs and PIREPs
pertinent to operations in the terminal area. Inform
pilots of where hazardous weather is occurring andhow the information may be obtained. Include
available information of known bird activity.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−22, Bird Activity Information.
h.When a runway length has been temporarily or
permanently shortened, ensure that the word
“WARNING” prefaces the runway number, and thatthe word “shortened” is also included in the text of the
message.
1.Available runway length, as stated in the
NOTAM, must be included in the ATIS broadcast.
This information must be broadcast for the durationof the construction project.
2.For permanently shortened runways, facilit-
ies must continue to broadcast this information for a
minimum of 30 days or until the Chart Supplement
U.S. has been updated, whichever is longer.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−9−3 Automatic Terminal Information Service ProceduresPHRASEOLOGY −
WARNING, RUNWAY (number) HAS BEENSHORTENED, (length in feet) FEET AVAILABLE.
EXAMPLE −
“Warning, Runway One-Zero has been shortened,niner-thousand eight hundred and fifty feet available.”
i.Runway braking action or friction reports when
provided. Include the time of the report and a worddescribing the cause of the runway friction problem.
PHRASEOLOGY −
RUNWAY (number) MU (first value, second value, thirdvalue) AT (time), (cause).
EXAMPLE −
“Runway Two Seven, MU forty −two, forty −one, twenty −
eight at one zero one eight Zulu, ice.”
REFERENCE −
F AAO JO 7110.65, Para 3 −3−5, Braking Action Advisories.
j.Other optional information as local conditions
dictate in coordination with ATC. This may includesuch items as VFR arrival frequencies, temporary
airport conditions, LAHSO operations being con −
ducted, or other perishable items that may appear
only for a matter of hours or a few days on the ATIS
message.k.Low level wind shear/microburst when repor-
ted by pilots or is detected on a wind shear detection
system.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−8, Low Level Wind Shear/Microburst
Advisories.
l.A statement which advises the pilot to read back
instructions to hold short of a runway. The air traffic
manager may elect to remove this requirement
60 days after implementation provided that removing
the statement from the ATIS does not result in
increased requests from aircraft for read back of hold
short instructions.
m.Instructions for the pilot to acknowledge
receipt of the ATIS message by informing the
controller on initial contact.
EXAMPLE −
“Boston T ower Information Delta. One four zero zero Zulu.
Wind two five zero at one zero. Visibility one zero. Ceiling
four thousand five hundred broken. T emperature three four.
Dew point two eight. Altimeter three zero one zero.ILS−DME Runway Two Seven Appr oach in use. Departing
Runway Two Two Right. Hazardous Weather Informationfor (geographical area) available on HIWAS or Flight
Service Frequencies. Advise on initial contact you have
Delta.”5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−10−1 Team Position ResponsibilitiesSection 10. Team Position Responsibilities
2−10−1. EN ROUTE OR OCEANIC SECTOR
TEAM POSITION RESPONSIBILITIES
a.En Route or Oceanic Sector Team Concept and
Intent: There are no absolute divisions of
responsibilities regarding position operations. The
tasks to be completed remain the same whether one,
two, or three people are working positions within a
sector. The team, as a whole, has responsibility for the
safe and efficient operation of that sector.
b.Terms. The following terms will be used in
en route facilities for the purpose of standardization:
1.Sector. The area of control responsibility
(delegated airspace) of the en route sector team, and
the team as a whole.
2.Radar Position (R). That position which is in
direct communication with the aircraft and which
uses radar information as the primary means ofseparation.
3.Radar Associate (RA). That position some-
times referred to as “D −Side” or “Manual
Controller.”
4.Radar Coordinator Position (RC). That
position sometimes referred to as “Coordinator,”
“Tracker,” or “Handoff Controller” (En Route).
5.Radar Flight Data (FD). That position
commonly referred to as “Assistant Controller” or
“A−Side” position.
6.Nonradar Position (NR). That position which
is usually in direct communication with the aircraft
and which uses nonradar procedures as the primarymeans of separation.
c.Primary responsibilities of the En Route Sector
Team Positions:
1.Radar Position:
(a)Ensure separation.
(b)Initiate control instructions.
(c)Monitor and operate radios.
(d)Accept and initiate automated handoffs.
(e)Assist the radar associate position with
nonautomated handoff actions when needed.(f)Assist the radar associate position in
coordination when needed.
(g)Scan radar display. Correlate with flight
progress strip information or EDST data, asapplicable.
(h)Ensure computer entries are completed on
instructions or clearances you issue or receive.
(i)Ensure strip marking and/or electronic
flight data entries are completed on instructions orclearances you issue or receive.
(j)Adjust equipment at radar position to be
usable by all members of the team.
(k)The radar controller must not be respon-
sible for G/G communications when precluded by
VSCS split functionality.
(l)At ERAM facilities, ensure the situation
display accurately reflects the status of all SAAs that
impact their area of control responsibility.
2.Radar Associate Position:
(a)Ensure separation.
(b)Where available, use EDST to plan,
organize, and expedite the flow of traffic.
(c)Initiate control instructions.
(d)Operate interphones.
(e)Accept and initiate nonautomated hand-
offs, and ensure radar position is made aware of the
actions.
(f)Assist the radar position by accepting or
initiating
automated handoffs which are necessary for
the continued smooth operation of the sector, and
ensure that the radar position is made immediatelyaware of any action taken.
(g)Coordinate, including pointouts.
(h)Monitor radios when not performing
higher priority duties.
(i)Scan flight progress strips and/or EDST
data. Correlate with radar data.
(j)Manage flight progress strips and/or
electronic flight data.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−10−2 Team Position Responsibilities(k)Ensure computer entries are completed on
instructions issued or received. Enter instructions
issued or received by the radar position when aware
of those instructions.
(l)As appropriate, ensure strip marking
and/or EDST data entries are completed oninstructions issued or received, and record instruc-
tions issued or received by the radar position when
aware of them.
(m) Adjust equipment at radar associate
position to be usable by all members of the team.
(n)Where authorized, perform EDST data
entries to keep the activation status of designated
Airspace Configuration Elements current.
(o)At ERAM facilities, scan the radar
associate display for electronically distributed
information, evaluate the information, and takeaction as appropriate.
3.Radar Coordinator Position:
(a)Perform interfacility/intrafacility/sector/
position coordination of traffic actions.
(b)Advise the radar position and the radar
associate position of sector actions required toaccomplish overall objectives.
(c)Perform any of the functions of the
en route sector team which will assist in meetingsituation objectives.
(d)The RC controller must not be responsible
for monitoring or operating radios when precluded by
VSCS split functionality.
NOTE−
The Radar Position has the r esponsibility for managing the
overall sector operations, including aircraft separation
and traffic flows. The Radar Coor dinator Position assumes
responsibility for managing traffic flows and the RadarPosition r etains responsibility for aircraft separation when
the Radar Coordinator Position is staffed.
4.Radar Flight Data:
(a)Operate interphone.
(b)Assist Radar Associate Position in
managing flight progress strips.
(c)Receive/process and distribute flight
progress strips.
(d)Ensure flight data processing equipment
is operational, except for EDST capabilities.(e)Request/receive and disseminate weather,
NOTAMs, NAS status, traffic management, and
Special Use Airspace status messages.
(f)Manually prepare flight progress strips
when automation systems are not available.
(g)Enter flight data into computer.
(h)Forward flight data via computer.
(i)Assist facility/sector in meeting situation
objectives.
5.En Route Nonradar Position:
(a)Ensure separation.
(b)Initiate control instructions.
(c)Monitor and operate radios.
(d)Accept and initiate transfer of control,
communications, and flight data.
(e)Ensure computer entries are completed on
instructions or clearances issued or received.
(f)Ensure strip marking is completed on
instructions or clearances issued or received.
(g)Facilities utilizing nonradar positions may
modify the standards contained in the radar associate,
radar coordinator, and radar flight data sections to
accommodate facility/sector needs, i.e., nonradarcoordinator, nonradar data positions.
2−10−2. TERMINAL RADAR/NONRADAR
TEAM POSITION RESPONSIBILITIES
a.Terminal Radar Team Concept and Intent:
There are no absolute divisions of responsibilities
regarding position operations. The tasks to be
completed remain the same whether one, two, or
three people are working positions within a
facility/sector. The team, as a whole, has
responsibility for the safe and efficient operation of
that facility/sector.
b.Terms. The following terms will be used in
terminal facilities for the purposes of standardization.
1.Facility/Sector. The area of control responsi-
bility (delegated airspace) of the radar team, and theteam as a whole.
2.Radar Position (R). That position w hich is in
direct communication with the aircraft and which
uses radar information as the primary means of
separation.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−10−3 Team Position Responsibilities3.Radar Associate Position (RA). That position
commonly referred to as “Handoff Controller” or
“Radar Data Controller.”
4.Radar Coordinator Position (RC). That
position commonly referred to as “Coordinator,”
“Tracker,” “Sequencer,” or “Overhead.”
5.Radar Flight Data (FD). That position
commonly referred to as “Flight Data.”
6.Nonradar Position (NR). That position which
is usually in direct communication with the aircraft
and which uses nonradar procedures as the primary
means of separation.
c.Primary Responsibilities of the Terminal Radar
Team Positions:
1.Radar Position:
(a)Ensure separation.
(b)Initiate control instructions.
(c)Monitor and operate radios.
(d)Accept and initiate automated handoffs.
(e)Assist the Radar Associate Position with
nonautomated handoff actions when needed.
(f)Assist the Radar Associate Position in
coordination when needed.
(g)Scan radar display. Correlate with flight
progress strip information.
(h)Ensure computer entries are completed on
instructions or clearances you issue or receive.
(i)Ensure strip marking is completed on
instructions or clearances you issue or receive.
(j)Adjust equipment at Radar Position to be
usable by all members of the team.
2.Radar Associate Position:
(a)Ensure separation.
(b)Initiate control instructions.
(c)Operate interphones.
(d)Maintain awareness of facility/sector
activities.
(e)Accept and initiate nonautomated
handoffs.
(f)Assist the Radar Position by accepting or
initiating automated handoffs which are necessary forthe continued smooth operation of the facility/sector
and ensure that the Radar Position is made
immediately aware of any actions taken.
(g)Coordinate, including point outs.
(h)Scan flight progress strips. Correlate with
radar data.
(i)Manage flight progress strips.
(j)Ensure computer entries are completed on
instructions issued or received, and enter instructions
issued or received by the Radar Position when aware
of those instructions.
(k)Ensure strip marking is completed on
instructions issued or received, and write instructions
issued or received by the Radar Position when aware
of them.
(l)Adjust equipment at Radar Associate
Position to be usable by all members of the Radar
Team.
3.Radar Coordinator Position:
(a)Perform interfacility/sector/position
coordination of traffic actions.
(b)Advise the Radar Position and the Radar
Associate Position of facility/sector actions required
to accomplish overall objectives.
(c)Perform any of the functions of the Radar
Team which will assist in meeting situation
objectives.
NOTE−
The Radar Position has the responsibility of managing the
overall sector operations, including aircraft separationand traffic flows. The Radar Coor dinator Position assumes
responsibility for managing traffic flows and the Radar
Position r etains responsibility for aircraft separation when
the Radar Coordinator Position is staffed.
4.Radar Flight Data:
(a)Operate interphones.
(b)Process and forward flight plan
information.
(c)Compile statistical data.
(d)Assist facility/sector in meeting situation
objectives.
5.Terminal Nonradar Position:
(a)Ensure separation.
(b)Initiate control instructions.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
2−10−4 Team Position Responsibilities(c)Monitor and operate radios.
(d)Accept and initiate transfer of control,
communications and flight data.
(e)Ensure computer entries are completed on
instructions or clearances issued or received.
(f)Ensure strip marking is completed on
instructions or clearances issued or received.
(g)Facilities utilizing nonradar positions may
modify the standards contained in the radar associate,
radar coordinator, and radar flight data sections toaccommodate facility/sector needs, i.e., nonradar
coordinator, nonradar data positions.
2−10−3. TOWER TEAM POSITION
RESPONSIBILITIES
a.Tower Team Concept and Intent: There are no
absolute divisions of responsibilities regarding
position operations. The tasks to be completed
remain the same whether one, two, or three people are
working positions within a facility/sector. The team,
as a whole, has responsibility for the safe and ef ficient
operation of that facility/sector.
b.Terms: The following terms will be used in
terminal facilities for the purpose of standardization.
1.Tower Cab: The area of control responsibility
(delegated airspace and/or airport surface areas) of
the tower team, and the team as a whole.
2.Tower Position(s) (LC or GC): That position
which is in direct communications with the aircraftand ensures separation of aircraft in/on the area of
jurisdiction.
3.Tower Associate Position(s): That position
commonly referred to as “Local Assist,” “Ground
Assist,” “Local Associate,” or “Ground Associate.”
4.Tower Cab Coordinator Position (CC): That
position commonly referred to as “Coordinator.”
5.Flight Data (FD): That position commonly
referred to as “Flight Data.”
6.Clearance Delivery (CD): That position
commonly referred to as “Clearance.”
c.Primary responsibilities of the Tower Team
Positions:
1.Tower Position(s) (LC or GC):(a)Ensure separation.
(b)Initiate control instructions.
(c)Monitor and operate communications
equipment.
(d)Utilize tower radar display(s).
(e)Utilize alphanumerics.
(f)Assist the Tower Associate Position with
coordination.
(g)Scan tower cab environment.
(h)Ensure computer entries are completed
for instructions or clearances issued or received.
(i)Ensure strip marking is completed for
instructions or clearances issued or received.
(j)Process and forward flight plan
information.
(k)Perform any functions of the Tower Team
which will assist in meeting situation objectives.
2.Tower Associate Position(s):
(a)Ensure separation.
(b)Operate interphones.
(c)Maintain awareness of tower cab
activities.
(d)Utilize alphanumerics.
(e)Utilize tower radar display(s).
(f)Assist Tower Position by accepting/
initiating coordination for the continued smooth
operation of the tower cab and ensure that the Tower
Position is made immediately aware of any actions
taken.
(g)Manage flight plan information.
(h)Ensure computer entries are completed
for instructions issued or received and enter
instructions issued or received by a Tower Position.
(i)Ensure strip marking is completed for
instructions issued or received and enter instructions
issued or received by a Tower Position.
3.Tower Coordinator Position:
(a)Perform interfacility/position coordina-
tion for traffic actions.
(b)Advise the tower and the T ower Associate
Position(s) of tower cab actions required to
accomplish overall objectives.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
2−10−5 Team Position Responsibilities(c)Perform any of the functions of the T ower
Team which will assist in meeting situation
objectives.
NOTE−
The Tower Positions have the responsibility for aircraftseparation and traffic flows. The Tower CoordinatorPosition assumes r esponsibility for managing traffic flows
and the Tower Positions retain responsibility for aircraft
separation when the To wer Coordinator Position is staffed.
4.Flight Data:
(a)Operate interphones.
(b)Process and forward flight plan
information.
(c)Compile statistical data.
(d)Assist tower cab in meeting situation
objectives.
(e)Observe and report weather information.(f)Utilize alphanumerics.
5.Clearance Delivery:
(a)Operate communications equipment.
(b)Process and forward flight plan
information.
(c)Issue clearances and ensure accuracy of
pilot read back.
(d)Assist tower cab in meeting situation
objectives.
(e)Operate tower equipment.
(f)Utilize alphanumerics.
NOTE−
The Tower Positions have the responsibility for aircraft
separation and traffic flows. The Tower CoordinatorPosition assumes r esponsibility for managing traffic flows
and the Tower Positions retain responsibility for aircraftseparation when the Tower Coor dinator Position is staffed.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−1−1 GeneralChapter 3. Airport Traffic Control − Terminal
Section 1. General
3−1−1. PROVIDE SERVICE
Provide airport traffic control service based only
upon observed or known traffic and airport
conditions.
NOTE−
When operating in accordance with CFRs, it is theresponsibility of the pilot to avoid collision with other
aircraft. However , due to the limited space ar ound terminal
locations, traffic information can aid pilots in avoiding
collision between aircraft operating within Class B,
Class C, or Class D surface areas and the terminal radarservice areas, and transiting aircraft operating inproximity to terminal locations.
3−1−2. PREVENTIVE CONTROL
Provide preventive control service only to aircraft
operating in accordance with a letter of agreement.When providing this service, issue advice or
instructions only if a situation develops which
requires corrective action.
NOTE−
1.Preventive control differs from other airport traffic
control in that r epetitious, routine approval of pilot action
is eliminated. Controllers intervene only when theyobserve a traffic conflict developing.
2.Airfield Operating instructions, Memorandums of
Understanding, or other specific directives used exclus-
ively by the Department of Defense (DOD) satisfies thecriteria in Paragraph 3-1-2 above.
3−1−3. USE OF ACTIVE RUNWAYS
The local controller has primary responsibility for
operations conducted on the active runway and must
control the use of those runways. Positive coordina-
tion and control is required as follows:
NOTE−
Exceptions may be authorized only as provided inpara 1−1−1 1, Constraints Governing Supplements and
Procedural Deviations, and F AAO JO 7210.3, Facility
Operation and Administration, para 10 −1−7, Use of Active
Runways,
where justified by extraordinary circumstances
at specific locations.REFERENCE −
F AAO JO 7110.65, Para 1 −1−1 1, Constraints Governing Supplements
and Procedural Deviations.
FAAO JO 7210.3, Para 10 −1−7, Use of Active Runways.
a.Ground control must obtain approval from local
control before authorizing an aircraft or a vehicle to
cross or use any portion of an active runway. The
coordination must include the point/intersection at
the runway where the operation will occur.
PHRASEOLOGY −
CROSS (runway) AT (point/intersection).
b.When the local controller authorizes another
controller to cross an active runway, the local
controller must verbally specify the runway to becrossed and the point/intersection at the runway
where the operation will occur preceded by the word
“cross.”
PHRASEOLOGY −
CROSS (runway) AT (point/intersection).
c.The ground controller must advise the local
controller when the coordinated runway operation iscomplete. This may be accomplished verbally or
through visual aids as specified by a facility directive.
d.USA/USAF/USN NOT APPLICABLE. Autho-
rization for aircraft/vehicles to taxi/proceed on or
along an active runway, for purposes other thancrossing, must be provided via direct communica-
tions on the appropriate local control frequency. This
authorization may be provided on the ground control
frequency after coordination with local control is
completed for those operations specifically described
in a facility directive.
NOTE−
The USA, USAF , and USN establish local operatingprocedures in accordance with, respectively, USA, USAF ,
and USN directives.
e.The local controller must coordinate with the
ground controller before using a runway not
previously designated as active.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−4, Coordination Between Local and
Ground Controllers.
JO 7110.65W 12/10/15
3−1−2 General3−1−4. COORDINATION BETWEEN LOCAL
AND GROUND CONTROLLERS
Local and ground controllers must exchange
information as necessary for the safe and ef ficient use
of airport runways and movement areas. This may be
accomplished via verbal means, flight progress strips,
other written information, or automation displays. As
a minimum, provide aircraft identification and
applicable runway/intersection/taxiway information
as follows:
a.Ground control must notify local control when
a departing aircraft has been taxied to a runway otherthan one previously designated as active.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−3, Use of Active Runways.
FAAO JO 7210.3, Para 10 −1−6, Selecting Active Runways.
b.Ground control must notify local control of any
aircraft taxied to an intersection for takeoff. This
notification may be accomplished by verbal means or
by flight progress strips.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures .
c.When the runways in use for landing/departing
aircraft are not visible from the tower or the aircraft
using them are not visible on radar, advise the
local/ground controller of the aircraft’s location
before releasing the aircraft to the other controller.
3−1−5. VEHICLES/EQUIPMENT/
PERSONNEL ON RUNWAYS
a.Ensure that the runway to be used is free of all
known ground vehicles, equipment, and personnelbefore a departing aircraft starts takeoff or a landing
aircraft crosses the runway threshold.
b.Vehicles, equipment, and personnel in direct
communications with the control tower may beauthorized to operate up to the edge of an active
runway surface when necessary. Provide advisories
as specified in para 3 −1−6, Traffic Information, and
para 3−7−5, Precision Approach Critical Area, as
appropriate.
PHRASEOLOGY −
PROCEED AS REQUESTED; (and if necessary,additional instructions or information).NOTE−
Establishing hold lines/signs is the responsibility of theairport manager. Standards for surface measurements,markings, and signs are contained in the following
Advisory Circulars; AC 150/5300 −13, Airport Design;
AC 150/5340 −1, Standards for Airport Markings, and
AC 150/5340 −18, Standards for Airport Sign Systems. The
operator is responsible to properly position the aircraft,vehicle, or equipment at the appropriate hold line/sign or
designated point. The requirements in para 3 −1−12,
Visually Scanning Runways, remain valid as appropriate.
REFERENCE −
F AAO JO 7110.65, Para 3 −7−4, Runway Proximity.
F AAO JO 7110.65, Para 3 −8−2, Touch-and-Go or Stop-and-Go or Low
Approach.F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
AC 150/5300 −13, Airport Design.
AC 150/5340 −1G, Standards for Airport Markings.
14 CFR Section 91.129, Operations in Class D Airspace.
AIM, Para 2 −2−3, Obstruction Lights.
P/CG Term − Runway in Use/Active Runway/Duty Runway.
3−1−6. TRAFFIC INFORMATION
a.Describe vehicles, equipment, or personnel on
or near the movement area in a manner which will
assist pilots in recognizing them.
EXAMPLE −
“Mower left of runway two seven.”
“Trucks crossing approach end of runway two five.”
“Workman on taxiway Bravo.”“Aircraft left of runway one eight.”
b.Describe the relative position of traffic in an
easy to understand manner, such as “to your right” or
“ahead of you.”
EXAMPLE −
“Traffic, U.S. Air MD −Eighty on downwind leg to your
left.”“King Air inbound from outer marker on straight-inapproach to runway one seven.”
c.When using a CTRD , you may issue traffic
advisories using the standard radar phr aseology prescribed
in para 2−1−21, Traffic Advisories.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
3−1−7. POSITION DETERMINATION
Determine the position of an aircraft before issuing
taxi instructions or takeoff clearance.
NOTE−
The aircraft’ s position may be determined visually by thecontroller, by pilots, or through the use of the ASDE.
JO 7110.65W 12/10/15
3−1−3 General3−1−8. LOW LEVEL WIND SHEAR/
MICROBURST ADVISORIES
a.When low level wind shear/microburst is
reported by pilots, Integrated Terminal Weather
System (ITWS), or detected on wind shear detection
systems such as LLWAS NE++, LLWAS −RS, WSP,
or TDWR, controllers must issue the alert to all
arriving and departing aircraft. Continue the alert to
aircraft until it is broadcast on the ATIS and pilots
indicate they have received the appropriate ATIS
code. A statement must be included on the ATIS for20 minutes following the last report or indication of
the wind shear/microburst.
PHRASEOLOGY −
LOW LEVEL WIND SHEAR (or MICROBURST, asappropriate) ADVISORIES IN EFFECT.
NOTE−
Some aircraft are equipped with Predictive Wind Shear(PWS) alert systems that warn the flight crew of a potential
wind shear up to 3 miles ahead and 25 degrees either side
of the air craft heading at or below 1200’ AGL. Pilot r eports
may include warnings received from PWS systems.
REFERENCE −
F AAO JO 7110.65, Para 2 −6−3, PIREP Information.
F AAO JO 7110.65, Para 2 −9−3, Content.
F AAO JO 7110.65, Para 3 −10−1, Landing Information.
b.At facilities without ATIS, ensure that wind
shear/microburst information is broadcast to allarriving and departing aircraft for 20 minutes
following the last report or indication of wind
shear/microburst.
1.At locations equipped with LLWAS, the local
controller must provide wind information as follows:
NOTE−
The LLWAS is designed to detect low level wind shear
conditions around the periphery of an airport. It does not
detect wind shear beyond that limitation.
REFERENCE −
F AAO JO 7210.3, Para 10 −3−3, Low Level W ind Shear/Microburst
Detection Systems.
(a)If an alert is received, issue the airport
wind and the displayed field boundary wind.
PHRASEOLOGY −
WIND SHEAR ALERT. AIRPORT WIND (direction) AT(velocity). (Location of sensor) BOUNDARY WIND
(direction) AT (velocity).
(b)If multiple alerts are received, issue an
advisory that there are wind shear alerts in
two/several/all quadrants. After issuing the advisory,
issue the airport wind in accordance with para 3 −9−1,Departure Information, followed by the field
boundary wind most appropriate to the aircraft
operation.
PHRASEOLOGY −
WIND SHEAR ALERTS TWO/SEVERAL/ALL
QUADRANTS. AIRPORT WIND (direction) AT (velocity).
(Location of sensor) BOUNDARY WIND (direction) AT(velocity).
(c)If requested by the pilot, issue specific
field boundary wind information even though theLLWAS may not be in alert status.
NOTE−
The requirements for issuance of wind information r emain
valid as appropriate under this paragraph, para 3 −9−1,
Departure Information and para 3 −10−1, Landing
Information.
2.Wind shear detection systems, including
TDWR, WSP, LLWAS NE++ and LLWAS −RS
provide the capability of displaying microburst alerts,
wind shear alerts, and wind information oriented to
the threshold or departure end of a runway. Whendetected, the associated ribbon display allows the
controller to read the displayed alert without any need
for interpretation.
(a)If a wind shear or microburst alert is
received for the runway in use, issue the alertinformation for that runway to arriving and departing
aircraft as it is displayed on the ribbon display.
PHRASEOLOGY −
(Runway) (arrival/departure) WIND SHEAR/MICROBURST ALERT, (windspeed) KNOT GAIN/LOSS,
(location).
EXAMPLE −
17A MBA 40K − 3MF
PHRASEOLOGY −
RUNWAY 17 ARRIVAL MICROBURST ALERT 40 KNOTLOSS 3 MILE FINAL.
EXAMPLE −
17D WSA 25K+ 2MD
PHRASEOLOGY −
RUNWAY 17 DEP ARTURE WIND SHEAR ALERT25 KNOT GAIN 2 MILE DEP ARTURE.
(b)If requested by the pilot or deemed
appropriate by the controller, issue the displayed
wind information oriented to the threshold ordeparture end of the runway.
PHRASEOLOGY −
(Runway) DEP ARTURE/THRESHOLD WIND (direction)AT (velocity).
JO 7110.65W 12/10/15
3−1−4 General(c)LLWAS NE++ or LLWAS −RS may detect
a possible wind shear/microburst at the edge of the
system but may be unable to distinguish between a
wind shear and a microburst. A wind shear alert
message will be displayed, followed by an asterisk,advising of a possible wind shear outside of the
system network.
NOTE−
LLWAS NE++ when associated with TDWR can detectwind shear/microbursts outside the network if the TDWR
fails.
PHRASEOLOGY −
(Appropriate wind or al ert information) POSSIBLE WIND
SHEAR OUTSIDE THE NETWORK.
(d)If unstable conditions produce multiple
alerts, issue an advisory of multiple wind shear/
microburst alerts followed by specific alert or windinformation most appropriate to the aircraft opera-
tion.
PHRASEOLOGY −
MULTIPLE WIND SHEAR/MICROBURST ALERTS
(specific alert or wind information).
(e)The LLWAS NE++ and LLWAS −RS are
designed to operate with as many as 50 percent of the
total sensors inoperative. When all three remotesensors designated for a specific runway arrival or
departure wind display line are inoperative then the
LLWAS NE++ and LLWAS −RS for that runway
arrival/departure must be considered out of service.
When a specific runway arrival or departure wind
display line is inoperative and wind shear/microburst
activity is likely; (for example, frontal activity,
convective storms, PIREPs), the following statement
must be included on the A TIS, “WIND SHEAR AND
MICROBURST INFORMATION FOR RUNWAY
(runway number) ARRIV AL/DEPARTURE NOT
A V AILABLE.”
NOTE−
The geographic situation display (GSD) is a supervisoryplanning tool and is not intended to be a primary tool formicroburst or wind shear.
c.Wind Shear Escape Procedures.
1.If an aircraft under your control informs you
that it is performing a wind shear escape, do not issue
control instructions that are contrary to pilot actions.ATC should continue to provide safety alerts
regarding terrain or obstacles and traffic advisories
for the escape aircraft, as appropriate.EXAMPLE −
“Denver Tower, United 1154, wind shear escape.”
NOTE−
Aircraft that execute a wind shear escape maneuver willusually conduct a full power climb straight ahead and will
not accept any control instructions until onboard systems
advise the crew or the pilot in command (PIC) advises ATC
that the escape maneuver is no longer required.
REFERENCE −
P/CG Term – Wind Shear Escape
2.Unless advised by additional aircraft that they
are also performing an escape procedure, do not
presume that other aircraft in the proximity of theescape aircraft are responding to wind shear
alerts/events as well. Continue to provide control
instructions, safety alerts, and traffic advisories, asappropriate.
3.Once the responding aircraft has initiated a
wind shear escape maneuver, the controller is not
responsible for providing approved separation
between the aircraft that is responding to an escapeand any other aircraft, airspace, terrain, or obstacle.
Responsibility for approved separation resumes
when one of the following conditions are met:
(a)Departures:
(1)A crew member informs ATC that the
wind shear escape maneuver is complete and ATC
observes that approved separation has been re-estab-
lished, or
(2)A crew member informs ATC that the
escape maneuver is complete and has resumed a
previously assigned departure clearance/routing.
(b)Arrivals:
(1)A crew member informs ATC that the
escape maneuver is complete, and
(2)The aircrew has executed an alternate
clearance or requested further instructions.
NOTE−
When the escape procedure is complete, the flight crew
must advise ATC they are returning to their previously
assigned clearance or request further instructions.
EXAMPLE −
“Denver T ower , United 1 154, wind shear escape complete,
resuming last assigned heading/(name) DP/clearance.”
Or
“Denver T ower , United 1 154, wind shear escape complete,
request further instructions.”
JO 7110.65W 12/10/15
3−1−5 General3−1−9. USE OF TOWER RADAR DISPLAYS
a.Uncertified tower display workstations must be
used only as an aid to assist controllers in visuallylocating aircraft or in determining their spatial
relationship to known geographical points. Radar
services and traffic advisories are not to be providedusing uncertified tower display workstations.
General information may be given in an easy to
understand manner, such as “to your right” or “ahead
of you.”
EXAMPLE −
“Follow the aircraft ahead of you passing the river at thestacks.” “King Air passing left to right.”
REFERENCE −
F AAO JO 7210.3, Para 10 −5−3, Functional Use of Certified T ower
Radar Displays.
b.Local controllers may use certified tower radar
displays for the following purposes:
1.To determine an aircraft’s identification,
exact location, or spatial relationship to other aircraft.
NOTE−
This authorization does not alter visual separation
procedures. When employing visual separation, theprovisions of para 7−2−1, Visual Separation, apply unless
otherwise authorized by the Vice President of TerminalService.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−2, Primary Radar Identification
Methods.
F AAO JO 7110.65, Para 5 −3−3, Beacon Identification Methods.
F AAO JO 7110.65, Para 5 −3−4, Terminal Automation Systems
Identification Methods.
2.To provide aircraft with radar traffic
advisories.
3.To provide a direction or suggested headings
to VFR aircraft as a method for radar identification or
as an advisory aid to navigation.
PHRASEOLOGY −
(Identification), PROCEED (direction) −BOUND, (other
instructions or information as necessary),
or
(identification), SUGGESTED HEADING (degrees),
(other instructions as necessary).
NOTE−
It is important that the pilot be aware of the fact that the
directions or headings being provided are suggestions or
are advisory in nature. This is to keep the pilot from beinginadvertently misled into assuming that radar vectors (andother associated radar services) are being provided when,
in fact, they are not.
4.To provide information and instructions to
aircraft operating within the surface area for which
the tower has responsibility.
EXAMPLE −
“TURN BASE LEG NOW.”
NOTE−
Unless otherwise authorized , tower radar displays are
intended to be an aid to local controllers in meeting theirresponsibilities to the air craft operating on the runways or
within the surface area. They are not intended to provide
radar benefits to pilots except for those accrued through a
more efficient and effective local control position. Inaddition, local controllers at nonapproach control towersmust devote the majority of their time to visually scanning
the runways and local area; an assurance of continued
positive radar identification could place distracting and
operationally inefficient requirements upon the localcontroller. Therefore, since the requirements ofpara 5−3−1, Application, cannot be assured, the radar
functions prescribed above are not considered to be radar
services and pilots should not be advised of being in “radar
contact.”
c.Additional functions may be performed
provided the procedures have been reviewed andauthorized by appropriate management levels.
REFERENCE −
F AAO JO 7110.65, Para 5 −5−4, Minima.
3−1−10. OBSERVED ABNORMALITIES
When requested by a pilot or when you deem it
necessary, inform an aircraft of any observed
abnormal aircraft condition.
PHRASEOLOGY −
(Item) APPEAR/S (observed condition).
EXAMPLE −
“Landing gear appears up.”“Landing gear appears down and in place.”“Rear baggage door appears open.”
3−1−11. SURFACE AREA RESTRICTIONS
a.If traffic conditions permit, approve a pilot’s
request to cross Class C or Class D surface areas or
exceed the Class C or Class D airspace speed limit.Do not, however, approve a speed in excess of
250 knots (288 mph) unless the pilot informs you a
higher minimum speed is required.
NOTE−
14 CFR Section 91.117 permits speeds in excess of
JO 7110.65W 12/10/15
3−1−6 General250 knots (288 mph) when so r equired or recommended in
the airplane flight manual or required by normal militaryoperating procedures.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−16, Surface Areas.
b.Do not approve a pilot’s request or ask a pilot to
conduct unusual maneuvers within surface areas of
Class B, C, or D airspace if they are not essential to
the performance of the flight.
EXCEPTION. A pilot’s request to conduct aerobatic
practice activities may be approved, when operatingin accordance with a lette r of agreement, and the
activity will have no adverse ef fect on safety of the air
traffic operation or result in a reduction of service toother users.
REFERENCE −
FAAO JO 7210.3, Para 5 −4−7, Aerobatic Practice Areas.
NOTE−
These unusual maneuvers include unnecessary low passes,
unscheduled flybys, practice instrument approaches toaltitudes below specified minima (unless a landing or
touch-and-go is to be made), or any so-called “buzz jobs”
wherein a flight is conducted at a low altitude and/or a high
rate of speed for thrill purposes. Such maneuvers increase
hazards to persons and property and contribute to noisecomplaints.
3−1−12. VISUALLY SCANNING RUNWAYS
a.Local controllers must visually scan runways to
the maximum extent possible.
b.Ground control must assist local control in
visually scanning runways, especially when runways
are in close proximity to other movement areas.
3−1−13. ESTABLISHING TWO −WAY
COMMUNICATIONS
Pilots are required to establish two-way radio
communications before entering the Class D
airspace. If the controller responds to a radio call
with, “(a/c call sign) standby ,” radio communications
have been established and the pilot can enter the
Class D airspace. If workload or traffic conditions
prevent immediate provision of Class D services,
inform the pilot to remain outside the Class D
airspace until conditions permit the services to be
provided.PHRASEOLOGY −
(A/c call sign) REMAIN OUTSIDE DELTA AIRSP ACEAND STANDBY.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
3−1−14. GROUND OPERATIONS WHEN
VOLCANIC ASH IS PRESENT
When volcanic ash is present on the airport surface,
and to the extent possible:
a.Avoid requiring aircraft to come to a full stop
while taxiing.
b.Provide for a rolling takeoff for all departures.
NOTE−
When aircraft begin a taxi or takeoff roll on ash
contaminated surfaces, large amounts of volcanic ash will
again become airborne. This newly airborne ash willsignificantly reduce visibility and will be ingested by theengines of following aircraft.
REFERENCE −
AIM, Para 7−5−9, Flight Operations in Volcanic Ash.
3−1−15. GROUND OPERATIONS RELATED
TO THREE/FOUR −HOUR TARMAC RULE
When a request is made by the pilot −in−command of
an aircraft to return to the ramp, gate, or alternate
deplaning area due to the Three/Four −Hour Tarmac
Rule:
a.Provide the requested services as soon as
operationally practical, or
b.Advise the pilot −in−command that the reques-
ted service cannot be accommodated because itwould create a significant disruption to air traffic
operations.
NOTE−
Facility procedures, including actions that constitute a
significant disruption, vary by airport and must be
identified in the facility directive pertaining to theThree/Four −Hour T armac Rule.
PHRASEOLOGY −
(Identification) TAXI TO (ramp, gate, or alternatedeplaning area) VIA (route).
or (Identification) EXPECT A (number) MINUTE DELAYDUE TO (ground and/or landing and/or departing)
TRAFFIC,
or
JO 7110.65W 12/10/15
3−1−7 General
(Identification) UNABLE DUE TO OPERATIONALDISRUPTION.
REFERENCE −
DOT Rule, Enhancing Airline Passenger Protections, 14 CFR, Part
259, commonly referred to as the Thr ee/Four−Hour T armac Rule.
JO 7110.65W 12/10/15
3−2−1 Visual SignalsSection 2. Visual Signals
3−2−1. LIGHT SIGNALS
Use ATC light signals from TBL 3 −2−1 to control
aircraft and the movement of vehicles, equipment,and personnel on the movement area when radio
communications cannot be employed.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
FAAO JO 7210.3, Para 4 −3−1, Letters of Agreement.
3−2−2. WARNING SIGNAL
Direct a general warning signal, alternating red and
green, to aircraft or vehicle operators, as appropriate,
when:
NOTE−
The warning signal is not a prohibitive signal and can be
followed by any other light signal, as circumstancespermit.
a.Aircraft are converging and a collision hazard
exists.
b.Mechanical trouble exists of which the pilot
might not be aware.
c.Other hazardous conditions are present which
call for intensified pilot or operator alertness. These
conditions may include obstructions, soft field, ice on
the runway, etc.3−2−3. RECEIVER-ONLY
ACKNOWLEDGMENT
To obtain acknowledgment from an aircraft equipped
with receiver only, request the aircraft to do the
following:
a.Fixed-wing aircraft:
1.Between sunrise and sunset:
(a)Move ailerons or rudders while on the
ground.
(b)Rock wings while in flight.
2.Between sunset and sunrise: Flash naviga-
tion or landing lights.
b.Helicopters:
1.Between sunrise and sunset:
(a)While hovering, either turn the helicopter
toward the controlling facility and flash the landinglight or rock the tip path plane.
(b)While in flight, either flash the landing
light or rock the tip path plane.
2.Between sunset and sunrise: Flash landing
light or search light.
TBL 3−2−1
ATC Light Signals
Meaning
Color and type of signal Aircraft on the ground Aircraft in flightMovement of vehicles,
equipment and personnel
Steady green Cleared for takeoff Cleared to land Cleared to cross; proceed; go
Flashing green Cleared to taxi Return for landing (to be followedby steady green at the proper time) Not applicable
Steady red Stop Give way to other aircraft andcontinue circling Stop
Flashing red Taxi clear of landing area orrunway in use Airport unsafe − Do not land Clear the taxiway/runway
Flashing white Return to starting point on
airportNot applicable Return to starting point onairport
Alternating red and green General Warning Signal −
Exercise Extreme CautionGeneral Warning Signal − Exercise
Extreme CautionGeneral Warning Signal −
Exercise Extreme Caution
JO 7110.65W 12/10/15
3−3−1 Airport ConditionsSection 3. Airport Conditions
3−3−1. LANDING AREA CONDITION
If you observe or are informed of any condition which
affects the safe use of a landing area:
NOTE−
1.The airport management/military operations office is
responsible for observing and reporting the condition of
the landing area.
2.It is the responsibility of the agency operating the
airport to provide the tower with current information
regarding airport conditions.
3.A disabled aircraft on a runway, after occupants are
clear, is normally handled by flight standards and airport
management/military operations office personnel in thesame manner as any obstruction; e.g., construction
equipment.
a.Relay the information to the airport manager/
military operations office concerned.
b.Copy verbatim any information received and
record the name of the person submitting it.
c.Confirm information obtained from other than
authorized airport or FAA personnel unless this
function is the responsibility of the militaryoperations office.
NOTE−
Civil airport managers are required to provide a list ofairport employees who are authorized to issue information
concerning conditions affecting the safe use of the airport.
d.If you are unable to contact the airport
management or operator, issue a NOTAM publiciz-ing an unsafe condition and inform the management
or operator as soon as practicable.
EXAMPLE −
“DISABLED AIRCRAFT ON RUNWAY.’’
NOTE−
1.Legally, only the airport management/military opera-
tions office can close a runway.
2.Military controllers are not authorized to issue
NOTAMs. It is the responsibility of the military operations
office.
e.Issue to aircraft only factual information, as
reported by the airport management concerning the
condition of the runway surface, describing theaccumulation of precipitation.EXAMPLE −
“ALL RUNWAYS COVERED BY COMP ACTED SNOWSIX INCHES DEEP .”
REFERENCE −
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.
3−3−2. CLOSED/UNSAFE RUNWAY
INFORMATION
If an aircraft requests to takeoff, land, or
touch-and-go on a closed or unsafe runway, informthe pilot the runway is closed or unsafe, and
a.If the pilot persists in his/her request, quote
him/her the appropriate parts of the NOTAM
applying to the runway and inform him/her that a
clearance cannot be issued.
b.Then, if the pilot insists and in your opinion the
intended operation would not adversely affect other
traffic, inform him/her that the operation will be at
his/her own risk.
PHRASEOLOGY −
RUNWAY (runway number) CLOSED/UNSAFE.
If appropriate, (quote NOTAM information),
UNABLE TO ISSUE DEP ARTURE/LANDING/T OUCH−
AND−GO CLEARANCE.
DEP ARTURE/LANDING/TOUCH −AND−GO WILL BE
AT YOUR OWN RISK.
c.Except as permitted by para 4 −8−7, Side-step
Maneuver, where parallel runways are served by
separate ILS systems and one of the runways is
closed, the ILS associated with the closed runway
should not be used for approaches unless not using the
ILS would have an adverse impact on the operational
efficiency of the airport.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−5, Landing Clearance.
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.
3−3−3. TIMELY INFORMATION
Issue airport condition information necessary for an
aircraft’s safe operation in time for it to be useful to
the pilot. Include the following, as appropriate:
a.Construction work on or immediately adjacent
to the movement area.
b.Rough portions of the movement area.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−3−2 Airport Conditionsc.Braking conditions caused by ice, snow, slush,
or water.
d.Snowdrifts or piles of snow on or along the
edges of the area and the extent of any plowed area.
e.Parked aircraft on the movement area.
f.Irregular operation of part or all of the airport
lighting system.
g.V olcanic ash on any airport surface area and
whether the ash is wet or dry (if known).
NOTE−
Braking action on wet ash may be degraded. Dry ash on the
runway may necessitate minimum use of reverse thrust.
h.Other pertinent airport conditions.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.
F AAO JO 7110.65, Para 2 −1−9, Reporting Essential Flight
Information.
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
3−3−4. BRAKING ACTION
Furnish quality of braking action, as received from
pilots or the airport management, to all aircraft as
follows:
a.Describe the quality of braking action using the
terms “good,” “fair,” “poor,” “nil,” or a combination
of these terms. If the pilot or airport managementreports braking action in other than the foregoing
terms, ask him/her to categorize braking action in
these terms.
NOTE−
The term “nil” is used to indicate bad or no braking action.
b.Include type of aircraft or vehicle from which
the report is received.
EXAMPLE −
“Braking action fair to poor, reported by a heavy D −C
Ten.”
“Braking action poor, reported by a Boeing SevenTwenty−Seven.”
c.If the braking action report affects only a portion
of a runway, obtain enough information from the pilot
or airport management to describe the braking action
in terms easily understood by the pilot.
EXAMPLE −
“Braking action poor first half of runway, reported by a
Lockheed Ten Eleven.”
“Braking action poor beyond the intersection of runwaytwo seven, reported by a Boeing Seven T wenty−Seven.”NOTE−
Descriptive terms, such as the first or the last half of therunway, should normally be used rather than landmarkdescriptions, such as opposite the fire station, south of a
taxiway, etc. Landmarks extraneous to the landing runway
are difficult to distinguish during low visibility, at night, or
anytime a pilot is busy landing an aircraft.
d.Furnish runway friction measurement readings/
values as received from airport management to
aircraft as follows:
1.Furnish information as received from the
airport management to pilots on the ATIS at locations
where friction measuring devices, such as
MU−Meter, Saab Friction Tester (SFT), and
Skiddometer are in use only when the MU values are
40 or less. Use the runway followed by the MU
number for each of the three runway segments, timeof report, and a word describing the cause of the
runway friction problem. Do not issue MU values
when all three segments of the runway have valuesreported greater than 40.
EXAMPLE −
“Runway two seven, MU forty −two, forty −one, twenty −
eight at one zero one eight Zulu, ice.”
2.Issue the runway surface condition and/or the
Runway Condition Reading (RCR), if provided, to all
USAF and ANG aircraft. Issue the RCR to other
aircraft upon pilot request.
EXAMPLE −
“Ice on runway, RCR zero five, patchy.”
NOTE−
1.USAF has established RCR pr ocedures for determining
the average deceleration readings of runways underconditions of water, slush, ice, or snow. The use of the RCR
code is dependent upon th e pilot’ s having a “stopping
capability chart” specifically applicable to his/heraircraft.
2.USAF offices furnish RCR information at airports
serving USAF and ANG aircraft.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.
F AAO JO 7110.65, Para 3 −3−5, Braking Action Advisories.
3−3−5. BRAKING ACTION ADVISORIES
a.When runway braking action reports are
received from pilots or the airport management which
include the terms “fair,” “poor,” or “nil” or whenever
weather conditions are conducive to deteriorating orrapidly changing runway conditions, include on the
ATIS broadcast the statement “Braking Action
Advisories are in effect.”
JO 7110.65W 12/10/15
3−3−3 Airport ConditionsREFERENCE −
FAAO JO 7210.3, Para 10 −4−1, Automatic T erminal Information
Service (ATIS).
b.During the time Braking Action Advisories are
in effect, take the following action:
1.Issue the latest braking action report for the
runway in use to each arriving and departing aircraft
early enough to be of benefit to the pilot. When
possible, include reports from super or heavy aircraft
when the arriving or departing aircraft is a super or
heavy .
2.If no report has been received for the runway
of intended use, issue an advisory to that effect.
PHRASEOLOGY −
NO BRAKING ACTION REPORTS RECEIVED FORRUNWAY (runway number).
3.Advise the airport management that runway
braking act ion reports of “fair,” “poor,” or “nil” have
been received.
REFERENCE −
FAAO JO 7210.3, Para 4 −3−1, Letters of Agr eement.
4.Solicit PIREPs of runway braking action.
REFERENCE −
F AAO JO 7110.65, Para 2 −6−3, PIREP Information.
c.Include runway friction measurement/values
received from airport management on the ATIS.Furnish the information when requested by the pilot
in accordance with para 3 −3−4, Braking Action.
REFERENCE −
F AAO JO 7110.65, Para 2 −9−3, Content.
F AAO JO 7110.65, Para 3 −9−1, Departure Information.
F AAO JO 7110.65, Para 3 −10−1, Landing Information.
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.
3−3−6. ARRESTING SYSTEM OPERATION
a.For normal operations, arresting systems
remotely controlled by ATC must remain in theretracted or down position.
NOTE−
1.USN− Runway Arresting Gear − barriers are not
operated by ATC personnel. Readiness/rigging of the
equipment is the responsibility of the operationsdepartment.
2.A request to raise a barrier or hook cable means the
barrier or cable on the departure end of the runway. If anapproach end engagement is r equired, the pilot or military
authority will specifically request that the approach end
cable be raised.REFERENCE −
F AAO JO 7610.4, Chapter 9, Section 3. Aircraft Arresting System,Single Frequency Approach (SF A), Simulated Flameout
(SFO)/Emergency Landing Pattern (ELP) Operations, Celestial
Navigation (CELNAV) T raining, Para 9 −3−1 through Para 9 −3−8.
b.Raise aircraft arresting systems whenever:
1.Requested by a pilot.
NOTE−
The standard emergency phraseology for a pilot r equesting
an arresting system to be raised for immediate engagement
is:
“BARRIER − BARRIER − BARRIER”
or
“CABLE − CABLE − CABLE.”
2.Requested by military authority; e.g., airfield
manager, supervisor of flying, mobile control of ficer,
etc.
NOTE−
USAF . W eb barriers at the departure end of the runway may
remain in the up position when requested by the senioroperational commander. The IFR Enr oute Supplement and
AP-1 will describe specific barrier configuration. ATC will
advise transient air craft of the barrier configuration using
the phraseology in subpara c , below.
3.A military jet aircraft is landing with known
or suspected radio failure or conditions (dragchute/hydraulic/electrical failure, etc.) that indicate
an arresting system may be needed. Exceptions are
authorized for military aircraft which cannot engagean arresting system (C −9, C−141, C−5, T−39, etc.)
and should be identified in a letter of agreement
and/or appropriate military directive.
c.When requested by military authority due to
freezing weather conditions or malfunction of theactivating mechanism, the barrier/cable may remain
in a raised position provided aircraft are advised.
PHRASEOLOGY −
YOUR DEP ARTURE/LANDING WILL BE TOWARD/OVER A RAISED BARRIER/CABLE ON RUNWAY
(number), (location, distance, as appropriate).
d.Inform civil and U.S. Army aircraft whenever
rubber supported cables are in place at the approach
end of the landing runway, and include the distance ofthe cables from the threshold. This information may
be omitted if it is published in the “Notices to
Airmen” publication/DOD FLIP.
EXAMPLE −
“Runway One Four arresting ca ble one thousand feet from
threshold.”
JO 7110.65W 12/10/15
3−3−4 Airport Conditionse.When arresting system operation has been
requested, inform the pilot of the indicated
barrier/cable position.
PHRASEOLOGY −
(Identification), BARRIER/CABLE INDICATESUP/DOWN. CLEARED FOR TAKEOFF/TO LAND.
f.Time permitting, advise pilots of the availability
of all arresting systems on the runway in question
when a pilot requests barrier information.
g.If an aircraft engages a raised barrier/cable,
initiate crash alarm procedures immediately.
h.For preplanned practice engagements not
associated with emergenc ies, crash alarm systems
need not be activated if, in accordance with local
military operating procedures, all required notifica-tions are made before the practice engagement.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.
3−3−7. FAR FIELD MONITOR (FFM)
REMOTE STATUS UNIT
a.To meet the demand for more facilities capable
of operating under CAT III weather, Type II
equipment is being upgraded to Integrity Level 3.This integrity level will support operations which
place a high degree of reliance on ILS guidance for
positioning through touchdown.
b.Installation of the FFM remote status indicating
units is necessary to attain the integrity necessary to
meet internationally agreed upon reliability values in
support of CAT III operations on Type II ILSequipment. The remote status indicating unit used in
conjunction with Type II equipment adds a third
integrity test; thereby, producing an approach aidwhich has integrity capable of providing Level 3
service.
c.The remote status sensing unit, when installed in
the tower cab, will give immediate indications oflocalizer out-of-tolerance conditions. The alarm in
the FFM remote status sensing unit indicates aninoperative or an out-of-tolerance localizer signal;
e.g., the course may have shifted due to equipment
malfunction or vehicle/aircraft encroachment into the
critical area.
d.Operation of the FFM remote sensing unit will
be based on the prevailing weather. The FFM remote
sensing unit must be operational when the weather is
below CAT I ILS minimums.
e.When the remote status unit indicates that the
localizer FFM is in alarm (aural warning following
the preset delay) and:
1.The aircraft is outside the middle marker
(MM) or in the absence of a MM, ½ mile final, check
for encroachment of those portions of the critical area
that can be seen from the tower. It is understood thatthe entire critical area may not be visible due to low
ceilings and poor visibility. The check is strictly to
determine possible causal factors for the out-of-toler-
ance situation. If the alarm has not cleared prior to the
aircraft’s arriving at the MM or in the absence of a
MM, ½ mile final, immediately issue an advisory that
the FFM remote status sensing unit indicates the
localizer is unreliable.
2.The aircraft is between the MM or ½ mile
final and the inner marker (IM), or if the IM is not
installed, the CAT II Missed Approach Point (MAP),
immediately issue an advisory that the FFM remote
status sensing unit indicates the localizer is
unreliable.
PHRASEOLOGY −
CAUTION, MONITOR INDICATES RUNWAY (number)LOCALIZER UNRELIABLE.
3.The aircraft has passed the IM or the CAT II
MAP (if the IM is not installed) there is no action
requirement. Although the FFM has been modified
with filters which dampen the effect of false alarms,you may expect alarms when aircraft are located
between the FFM and the localizer antenna either on
landing or on takeoff.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−4−1 Airport LightingSection 4. Airport Lighting
3−4−1. EMERGENCY LIGHTING
Whenever you become aware that an emergency has
or will occur, take action to provide for the operation
of all appropriate airport lighting aids as required.
REFERENCE −
F AAO JO 7110.65, Para 10 −4−2, Lighting Requirements.
3−4−2. RUNWAY END IDENTIFIER LIGHTS
When separate on −off controls are provided, operate
runway end identifier lights:
a.When the associated runway lights are lighted.
Turn the REIL off after:
1.An arriving aircraft has landed.
2.A departing aircraft has left the traffic pattern
area.
3.It is determined that the lights are of no
further use to the pilot.
b.As required by facility directives to meet local
conditions.
c.As requested by the pilot.
d.Operate intensity setting in accordance with the
values in TBL 3 −4−1 except as prescribed in
subparas b and c above.
TBL 3−4−1
REIL Intensity Setting −Three Step System
Settings Visibility
Day Night
3 Less than 2 miles Less than 1 mile
2 2 to 5 miles inclusive 1 to but not including 3
miles
1 When requested 3 miles or more
3−4−3. VISUAL APPROACH SLOPE
INDICATORS (VASI)
VASI systems with remote on −off switching must be
operated when they serve the runway in use and
where intensities are controlled in accordance with
TBL 3−4−2 and TBL 3 −4−3 except:
a.As required by facility directives to meet local
conditions.b.As required by the pilot.
TBL 3−4−2
V ASI Intensity Setting −Two Step System
Step Period/Condition
High Day−Sunrise to sunset.
Low Night−Sunset to sunrise.
TBL 3−4−3
V ASI Intensity Setting −Three Step System
Step Period/Condition
High Day−Sunrise to sunset.
Medium Twilight−From sunset to 30 minutes after
sunset and from 30 minutes before sunrise
to sunrise,* and during twilight in Alaska.
Low Night−Sunset to sunrise.
*During a 1 year period, twilight may vary 26 to 43 minutes between
25 and 49N latitude.
NOTE−
The basic F AA standard for VASI systems permitsindependent operation by means of photoelectric device.
This system has no on −off control feature and is intended
for continuous operation. Other VASI systems in useinclude those that are operated remotely from the controltower. These systems may consist of either a photoelectricintensity control with only an on −off switch, a two step
intensity system, or a three step intensity system.
REFERENCE −
F AAO JO 7210.3, Para 10 −6−5, Visual Approach Slope Indicator
(VASI) Systems.
F AAO 6850.2, Visual Guidance Lighting Systems.
3−4−4. PRECISION APPROACH PATH
INDICATORS (PAPI)
PAPI systems with remote on −off switching shall be
operated when they serve the runway in use andwhere intensities are controlled in accordance with
TBL 3−4−4 except:
a.As required by local facility directives to meet
local conditions.
b.As requested by the pilot.
NOTE−
The basic F AA standard for P API systems permitsindependent operation by means of photoelectric device.
This system has no on −off control feature and is intended
for continuous operation. Other P API systems in useinclude those that are operated remotely from the controltower. These systems may consist of either a photoelectric
JO 7110.65W 12/10/15
3−4−2 Airport Lightingintensity control with only an on −off switch, or a five −step
intensity system.
REFERENCE −
F AAO 6850.2, Visual Guidance Lighting Systems.
TBL 3−4−4
PAPI Intensity Setting − Five Step System
Step Period/Condition
5 On Pilot Request
4 Day − Sunrise to sunset
3 Night − Sunset to sunrise
2 On Pilot Request
1 On Pilot Request
*During a 1 year period, twilight may vary 26 to 43 minutes
between 25 and 49N latitude.
3−4−5. APPROACH LIGHTS
Operate approach lights:
a.Between sunset and sunrise when one of the
following conditions exists:
1.They serve the landing runway.
2.They serve a runway to which an approach is
being made but aircraft will land on another runway.
b.Between sunrise and sunset when the ceiling is
less than 1,000 feet or the prevailing visibility is
5 miles or less and approaches are being made to:
1.A landing runway served by the lights.
2.A runway served by the lights but aircraft are
landing on another runway.
3.The airport, but landing will be made on a
runway served by the lights.
c.As requested by the pilot.
d.As you deem necessary, if not contrary to pilot’s
request.
NOTE−
In the interest of energy conservation, the ALS should be
turned off when not needed for aircraft operations.
REFERENCE −
F AAO JO 7110.65, Para 3 −4−6, ALS Intensity Settings.3−4−6. ALS INTENSITY SETTINGS
When operating ALS as prescribed in para 3 −4−5,
Approach Lights, operate intensity controls inaccordance with the values in TBL 3 −4−5 except:
a.When facility directives specify other settings
to meet local atmospheric, topographic, and twilightconditions.
b.As requested by the pilot.
c.As you deem necessary, if not contrary to pilot’s
request.
TBL 3−4−5
ALS Intensity Setting
StepVisibility
(Applicable to runway served by lights)
Day Night
5 Less than 1 mile* When requested
4 1 to but not including 3 miles When requested
3 3 to but not including 5 miles Less than 1 mile*
2 5 to but not including 7 miles 1 to 3 miles inclusive
1 When requested Greater than 3 miles
*and/or 6,000 feet or less of the RVR on the runway served by
the ALS and RVR.
NOTE−
Daylight steps 2 and 3 provide recommended settings
applicable to conditions in subparas b and c. At night, use
step 4 or 5 only when requested by a pilot.
3−4−7. SEQUENCED FLASHING LIGHTS
(SFL)
Operate Sequenced Flashing Lights:
NOTE−
SFL are a component of the ALS and cannot be operated
when the ALS is off.
a.When the visibility is less than 3 miles and
instrument approaches are being made to the runway
served by the associated ALS.
b.As requested by the pilot.
c.As you deem necessary, if not contrary to pilot’s
request.
3−4−8. MALSR/ODALS
Operate MALSR/ODALS that have separate on −off
and intensity setting controls in accordance with
TBL 3−4−6 and TBL 3 −4−7 except:
a.When facility directives specify other settings
to meet local atmospheric, topographic, and twilight
conditions.
JO 7110.65W 12/10/15
3−4−3 Airport Lightingb.As requested by the pilot.
c.As you deem necessary, if not contrary to pilot’s
request.
TBL 3−4−6
Two Step MALS/One Step RAIL/Two Step ODALS
Settings Visibility
Day Night
MALS/ODALS
RAILHi
OnLess than 3 miles Less than 3 miles
MALS/ODALSRAIL Low
OffWhen requested 3 miles or more
*At locations providing part −time control tower service, if
duplicate controls are not provided in the associated FSS, the
MALSR/ODALS must be set to low intensity during the hours
of darkness when the tower is not staffed.
TBL 3−4−7
Three Step MALS/Three Step RAIL/
Three Step ODALS
Settings Visibility
Day Night
3 Less than 2 miles Less than 1 mile
2 2 to 5 miles inclusive 1 to but not including
3 miles*
1 When requested 3 miles or more
*At locations providing part −time control tower service, if
duplicate controls are not provided in the FSS on the airport,
the air−to−ground radio link shall be activated during the hours
of darkness when the tower is unmanned. If there is no radioair−to−ground control, the MALSR/ODALS shall be set on
intensity setting 2 during the hours of darkness when the tower
is not staffed.
REFERENCE −
F AAO JO 7210.3, Para 10 −6−2, Operation of Lights When T ower is
Closed.
3−4−9. ALSF −2/SSALR
a.When the prevailing visibility is 3/4 mile or less
or the RVR is 4,000 feet or less, operate the ALSF −2
system as follows:
1.As requested by the pilot.
2.As you deem necessary if not contrary to pilot
request.
b.Operate the SSALR system when the condi-
tions in subpara a are not a factor.3−4−10. RUNWAY EDGE LIGHTS
Operate the runway edge light system/s serving the
runway/s in use as follows:
a.Between sunset and sunrise, turn the lights on:
1.For departures. Before an aircraft taxies onto
the runway and until it leaves the Class B, Class C, or
Class D surface area.
2.For arrivals:
(a)IFR aircraft −Before the aircraft begins
final approach, or
(b)VFR aircraft −Before the aircraft enters
the Class B, Class C, or Class D surface area, and
(c)Until the aircraft has taxied off the landing
runway.
b.Between sunrise and sunset, turn the lights on as
shown in subparas a1 and a2 when the surfacevisibility is less than 2 miles.
c.As required by facility directives to meet local
conditions.
d.Different from subparas a, b, or c above, when:
1.You consider it necessary, or
2.Requested by a pilot and no other known
aircraft will be adversely affected.
NOTE−
Pilots may reque st lights to be turned on or off contrary to
subparas a, b, or c. However, 14 CFR Part 135 operatorsare required to land/takeoff on lighted runways/heliportlanding areas at night.
e.Do not turn on the runway edge lights when a
NOTAM closing the runway is in effect.
NOTE−
Application concerns use for takeoffs/landings/
approaches and does not pr eclude turning lights on for use
of unaffected portions of a runway for taxiing aircraft,surface vehicles, maintenance, repair, etc.
REFERENCE −
F AAO JO 7110.65, Para 3 −4−15, Simultaneous Approach and Runway
Edge Light Operation.
FAAO JO 7210.3, Para 10 −6−3, Incompatible Light System Operation.
F AAO JO 7210.3, Para 10 −6−9, Runway Edge Lights Associated With
Medium Approach Light System/Runway Alignment Indicator Lights.
JO 7110.65W 12/10/15
3−4−4 Airport Lighting3−4−11. HIGH INTENSITY RUNWAY,
RUNWAY CENTERLINE, AND TOUCHDOWNZONE LIGHTS
Operate high intensity runway and associated runway
centerline and touchdown zone lights in accordance
with TBL 3 −4−8, except:
a.Where a facility directive specifies other
settings to meet local conditions.
b.As requested by the pilot.
c.As you deem necessary, if not contrary to pilot
request.
TBL 3−4−8
HIRL, RCLS, TDZL Intensity Setting
Step Visibility
Day Night
5 Less than 1 mile* When requested
4 1 to but not including
2 miles*Less than 1 mile*
3 2 to but not including 3 miles 1 to but not including 3 miles*
2 When requested 3 to 5 miles inclusive
1 When requested More than 5 miles
*and/or appropriate RVR/RVV equivalent.
3−4−12. HIRL ASSOCIATED WITH MALSR
Operate HIRL which control the associated MALSR
in accordance with TBL 3 −4−9, except:
a.As requested by the pilot.
b.As you deem necessary, if not contrary to the
pilot’s request.
TBL 3−4−9
HIRL Associated with MALSR
Step Visibility
Day Night
5 Less than 1 mile When requested
4 1 to but not including
2 milesLess than 1 mile
3 2 to but not including3 miles 1 to but not including3 miles
2 When requested 3 to 5 miles inclusive
1 When requested More than 5 milesNOTE−
When going from a given brightness step setting to a lower
setting, rotation of the brightness control to a point belowthe intended step setting and then back to the appropriate
step setting will ensure that the MALSR will operate at the
appropriate brightness.
REFERENCE −
F AAO JO 7110.65, Para 3 −4−14, Medium Intensity Runway Lights.
3−4−13. HIRL CHANGES AFFECTING RVR
Keep the appropriate approach controller or PAR
controller informed, in advance if possible, of HIRL
changes that affect RVR.
3−4−14. MEDIUM INTENSITY RUNWAY
LIGHTS
Operate MIRL or MIRL which control the associated
MALSR in accordance with TBL 3 −4−10, except:
a.As requested by the pilot.
b.As you deem necessary, if not contrary to the
pilot’s request.
TBL 3−4−10
MIRL Intensity Setting
Step Visibility
Day Night
3 Less than 2 miles Less than 1 mile
2 2 to 3 miles 1 to 3 miles
1 When requested More than 3 miles
REFERENCE −
F AAO JO 7110.65, Para 3 −4−12, HIRL Associated With MALSR.
3−4−15. SIMULTANEOUS APPROACH AND
RUNWAY EDGE LIGHT OPERATION
Turn on the runway edge lights for the runway in use
whenever the associated approach lights are on. Ifmultiple runway light selection is not possible, you
may leave the approach lights on and switch the
runway lights to another runway to accommodateanother aircraft.
REFERENCE −
F AAO JO 7110.65, Para 3 −4−10, Runway Edge Lights.
JO 7110.65W 12/10/15
3−4−5 Airport Lighting3−4−16. HIGH SPEED TURNOFF LIGHTS
Operate high speed turnoff lights:
a.Whenever the associated runway lights are used
for arriving aircraft. Leave them on until the aircraft
has either entered a taxiway or passed the last light.
b.As required by facility directives to meet local
conditions.
c.As requested by the pilot.
3−4−17. TAXIWAY LIGHTS
Operate taxiway lights in accordance with
TBL 3−4−11, TBL 3 −4−12, or TBL 3 −4−13 except:
a.Where a facility directive specifies other
settings or times to meet local conditions.
b.As requested by the pilot.
c.As you deem necessary, if not contrary to pilot
request.
TBL 3−4−11
Three Step Taxiway Lights
Step Visibility
Day Night
3 Less than 1 mile When requested
2 When requested Less than 1 mile
1 When requested 1 mile of more
TBL 3−4−12
Five Step Taxiway Lights
Step Visibility
Day Night
5 Less than 1 mile When requested
4 When requested Less than 1 mile
3 When requested 1 mile or more
1 & 2 When requested When requested
TBL 3−4−13
One Step Taxiway Lights
Day Night
Less than 1 mile OnNOTE−
AC 150/5340-30, Design and Installation Details forAirport Visual Aides, contains recommended brightness
levels for variable setting taxiway lights.
3−4−18. OBSTRUCTION LIGHTS
If controls are provided, turn the lights on between
sunset and sunrise.
3−4−19. ROTATING BEACON
If controls are provided, turn the rotating beacon on:
a.Between sunset and sunrise.
b.Between sunrise and sunset when the reported
ceiling or visibility is below basic VFR minima.
3−4−20. RUNWAY STATUS LIGHTS (RWSL)
TERMINAL
RWSL is equipped with automatic intensity settings
and must be operated on a continuous basis exceptunder the following conditions:
a.If a pilot or vehicle report indicates any portion
of the RWSL system is on and is not able to accept an
ATC clearance; then
1.ATC must visually scan the entire runway. If
the runway is observed to be clear and the lights are
still illuminated, then the lights must be turned off and
clearance re-issued.
2.If a portion of the runway is not visible from
the tower, A TC must visually scan the ASDE-X. If the
runway is observed to be clear and the lights are still
illuminated, then the lights must be turned off andclearance re-issued.
b.When the RWSL Operational Status displays
“Lost Comm with System,” consider the RWSL
system out of service until checked and confirmed to
be operational by technical operations personnel.
c.Once RWSL systems are turned off, they must
remain off until returned to service by technical
operations personnel.
d.Upon pilot request, adjust the light intensity.
JO 7110.65W 12/10/15
3−5−1 Runway SelectionSection 5. Runway Selection
3−5−1. SELECTION
a.Except where a “runway use” program is in
effect, use the runway most nearly aligned with thewind when 5 knots or more or the “calm wind”
runway when less than 5 knots (set tetrahedron
accordingly) unless use of another runway:
NOTE−
1.If a pilot prefers to use a runway different from that
specified, the pilot is expected to advise ATC.
2.At airports where a “r unway use” program is
established, ATC will assign runways deemed to have the
least noise impact. If in the interest of safety a runway
different from that specified is preferred, the pilot isexpected to advise ATC accordingly. ATC will honor such
requests and advise pilots when the requested runway is
noise sensitive.
REFERENCE −
F AAO 8400.9, National Safety and Operational Criteria for Runway
Use Programs.
1.Will be operationally advantageous, or
2.Is requested by the pilot.b.When conducting aircraft operations on other
than the advertised active runway, state the runway in
use.
3−5−2. STOL RUNWAYS
Use STOL runways as follows:
a.A designated STOL runway may be assigned
only when requested by the pilot or as specified in a
letter of agreement with an aircraft operator.
b.Issue the measured STOL runway length if the
pilot requests it.
3−5−3. TAILWIND COMPONENTS
When authorizing use of runways and a tailwind
component exists, always state both wind direction
and velocity.
NOTE−
The wind may be described as “calm” when appropriate.
REFERENCE −
F AAO JO 7110.65, Para 2 −6−5, Calm Wind Conditions.
JO 7110.65W 12/10/15
3−6−1 Airport Surface Detection ProceduresSection 6. Airport Surface Detection Procedures
3−6−1. EQUIPMENT USAGE
a.The operational status of ASDE systems must
be determined during the relief briefing, or as soon as
possible after assuming responsibility for the
associated position.
b.Use ASDE systems to augment visual observa-
tion of aircraft landing or departing, and aircraft or
vehicular movements on runways and taxiways, orother parts of the movement area.
1.ASDE systems with safety logic must be
operated continuously.
2.ASDE systems without safety logic must be
operated:
(a)Continuously between sunset and sunrise.
(b)When visibility is less than the most
distant point in the active movement area, or
(c)When, in your judgment, its use will assist
you in the performance of your duties at any time.
3−6−2. IDENTIFICATION
a.To identify an observed target/track on an
ASDE system display, correlate its position with one
or more of the following:
1.Pilot/vehicle operator position report.
2.Controller’s visual observation.
3.An identified target observed on the ASR or
CTRD.
b.An observed target/track on an ASDE system
display may be identified as a false target by visual
observation. If the area containing a suspected false
target is not visible from the tower, an airportoperations vehicle or pilots of aircraft operating in the
area may be used to conduct the visual observation.
c.After positive verification that a target is false,
through pilot/vehicle operator position report orcontroller visual observation, the track may be
temporarily dropped, which will remove the target
from the display and safety logic processing. A
notation must be made to FAA Form 7230 −4, Daily
Record of Facility Operation, when a track istemporarily dropped.3−6−3. INFORMATION USAGE
a.ASDE system derived information may be used
to:
1.Formulate clearances and control instruc-
tions to aircraft and vehicles on the movement area.
REFERENCE −
FAAO JO 7210.3, Para 3 −7−2, Radar Use.
2.Position aircraft and vehicles using the
movement area.
3.Determine the exact location of aircraft and
vehicles, or spatial relationship to other aircraft/
vehicles on the movement area.
4.Monitor compliance with control instructions
by aircraft and vehicles on taxiways and runways.
5.Confirm pilot reported positions.
6.Provide directional taxi information, as
appropriate.
PHRASEOLOGY −
TURN (left/right) ON THE T AXIWAY/RUNWAY YOU ARE
APPROACHING.
b.Do not provide specific navigational guidance
(exact headings to be followed) unless an emergency
exists or by mutual agreement with the pilot.
NOTE−
It remains the pilot’ s responsibility to navigate visually viaroutes to the clearance limit specified by the contr oller and
to avoid other parked or taxiing aircraft, vehicles, orpersons in the movement area.
c.Do not allow an aircraft to begin departure roll
or cross the landing threshold whenever there is anunidentified target/track displayed on the runway.
3−6−4. SAFETY LOGIC ALERT
RESPONSES
When the system generates an alert, the controller
must immediately assess the situation visually and as
presented on the ASDE system display, then take
appropriate action as follows:
a.When an arrival aircraft (still airborne, prior to
the landing threshold) activates a warning alert, the
controller must issue go −around instructions.
(Exception: Alerts involving known formation
flights, as they cross the landing threshold, may bedisregarded if all other factors are acceptable.)
JO 7110.65W 12/10/15
3−6−2 Airport Surface Detection ProceduresNOTE−
The intent of this paragraph is that an aircraft does not landon the runway, on that approach, when the safety logicsystem has generated a warning alert. A side −step
maneuver or cir cle to land on another runway satisfies this
requirement.
REFERENCE −
F AAO JO 7110.65, Para 3 −8−1, Sequence/Spacing Application.
F AAO JO 7110.65, Para 3 −9−6, Same Runway Separation.
F AAO JO 7110.65, Para 3 −10−3, Same Runway Separation.
P/CG Term − Go Around.
b.When two arrival aircraft, or an arrival aircraft
and a departing aircraft activate an alert, the
controller will issue go −around instructions or take
appropriate action to ensure intersecting runwayseparation is maintained.REFERENCE −
F AAO JO 7110.65, Para 3 −9−8, Intersecting Runway/Intersecting
Flight Path Operations.
F AAO JO 7110.65, Para 3 −10−4, Intersecting Runway/Intersecting
Flight Path Separation.
c.For other safety logic system alerts, issue
instructions/clearances based on good judgment and
evaluation of the situation at hand.
3−6−5. RADAR −ONLY MODE
Radar−only mode is an enhancement of the ASDE −X
system which allows the system to stay operationalwith safety logic processing, despite a critical fault in
the Multilateration (MLAT) subsystem. The system
stays in full core alert status under radar −only mode
without data block capability.
JO 7110.65W 12/10/15
3−7−1 Taxi and Ground Movement ProceduresSection 7. Taxi and Ground Movement Procedures
3−7−1. GROUND TRAFFIC MOVEMENT
Issue by radio or directional light signals specific
instructions which approve or disapprove the
movement of aircraft, vehicles, equipment, or
personnel on the movement area except wherepermitted in an LOA.
REFERENCE −
FAAO JO 7210.3, Para 4 −3−1, Letters of Agr eement
FAAO JO 7210.3, Para 4 −3−2, Appr opriate Subjects
a.Do not issue conditional instructions that are
dependent upon the movement of an arrival aircraft
on or approaching the runway or a departure aircraft
established on a takeoff roll. Do not say, “Line up and
wait behind landing traffic,” or “Taxi/proceed across
Runway Three −Six behind departing/landing Cita-
tion.” The above requirements do not preclude
issuing instructions to follow an aircraft observed to
be operating on the movement area in accordancewith an ATC clearance/instruction and in such a
manner that the instructions to follow are not
ambiguous.
b.Do not issue unconditional instructions when
authorizing movement on a runway/taxiway for the
purpose of airfield checks or other airport operations.
Instructions must ensure positive control with
specific instructions to proceed on a runway or
movement area, and as necessary, hold shortinstructions.
REFERENCE −
FAAO JO 7110.65, Para 3 −1−3, USE OF ACTIVE RUNWAYS
F AAO JO 7110. 65, Para 3 −7−2, TAXI AND GROUND MOVEMENT
OPERATIONS
EXAMPLE −
“Airport 1, pr oceed on Runway 26R, hold short of Runway
18L.” “(Tower), Airport 1 at taxiway B8, request to inspect
Runway 26R.” “Airport 1 pr oceed as requested, hold short
of Runway 18L.” “Airport 1 proceed on taxi way B, hold short of Runway18L.”
NOTE−
The following are examples of unconditional instructionsand are not approved for use: “THE FIELD IS YOURS,”
“CLEARED ON ALL SURF ACES,” “THE AIRPORT IS
YOURS,” and “PROCEED ON ALL RUNWAYS ANDTAXIWAYS.”c.Do not use the word “cleared” in conjunction
with authorization for aircraft to taxi or equipment/
vehicle/personnel operations. Use the prefix “taxi,”
“proceed,” or “hold,” as appropriate, for aircraft
instructions and “proceed” or “hold” for equipment/vehicles/personnel.
d.Intersection departures may be initiated by a
controller or a controller may authorize an
intersection departure if a pilot requests. Issue the
measured distance from the intersection to therunway end rounded “down” to the nearest 50 feet to
any pilot who requests and to all military aircraft,
unless use of the intersection is covered inappropriate directives.
NOTE−
1.Exceptions are authorized where specific military
aircraft routinely make intersection takeoffs and proced-ures are defined in appropriate directives. The authorityexercising operational control of such airc raft ensures that
all pilots are thoroughly familiar with these procedures,
including the usable runway length from the applicable
intersection.
2.Some airports publish “declared distances” for a
particular runway. These are published in the Chart
Supplement U.S. or the Aeronautical Information
Publication (AIP) and there is no r equirement that facility
personnel be aware of them. These distances are a means
of satisfying airport design criteria and are intended to be
used by pilots and/or operators for preflight performanceplanning only. There are no special markings, signing, or
lighting associated with declared distances and they do not
limit the actual runway available for use by an aircraft.Therefore, they cannot be used for any air traffic control
purpose. If pilots inquire about the existence of declared
distances, r efer them to the Chart Supplement U.S. or AIP .
PHRASEOLOGY −
RUNWAY (number) AT (taxiway designator)INTERSECTION DEP ARTURE (remaining length) FEETAVAILABLE.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−4, Line Up and Wait (LUAW).
e.Do not use the term “full length” when the
runway length available for departures has been
temporarily shortened. On permanently shortenedrunways, do not use the term “full length” until the
Chart Supplement U.S. is updated to include the
change(s).5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−7−2 Taxi and Ground Movement ProceduresREFERENCE −
F AAO JO 7210.3, Para 10-3-11, Airport ConstructionF AAO JO 7210.3, Para 10-3-12, Change in Runway Length Due to
Construction
3−7−2. TAXI AND GROUND MOVEMENT
OPERATIONS
Issue the route for the aircraft/vehicle to follow on the
movement area in concise and easy to understand
terms. The taxi clearance must include the specificroute to follow. When a taxi clearance to a runway is
issued to an aircraft, confirm the aircraft has the
correct runway assignment.
NOTE−
1.A pilot’ s read back of taxi instructions with the runway
assignment can be considered confirmation of runwayassignment.
2.Movement of aircraft or vehicles on nonmovement
areas is the r esponsibility of the pilot, the air craft operator,
or the airport management.
a.When authorizing an airc raft/vehicle to proceed
on the movement area or to any point other than
assigned takeoff runway, specify the route/taxiinstructions. If it is the intent to hold the
aircraft/vehicle short of any given point along the taxi
route, issue the route and then state the holdinginstructions.
NOTE−
1.The absence of holding instructions authorizes an
aircraft/vehicle to cross all taxiways that intersect the taxi
route.
2.Movement of aircraft or vehicles on non −movement
areas is the r esponsibility of the pilot, the air craft operator,
or the airport management.
PHRASEOLOGY −
HOLD POSITION.
HOLD FOR (reason)
CROSS (runway/taxiway)
or
TAXI/CONTINUE TAXIING/PROCEED/VIA (route),
or
ON (runway number or taxiways, etc.),
or
TO (location),or
(direction),
or
ACROSS RUNWAY (number).
or
VIA (route), HOLD SHORT OF (location)
or
FOLLOW (traffic) (restrictions as necessary)
or
BEHIND (traffic).
EXAMPLE −
“Cross Runway Two −Eight Left, hold short of Runway
Two−Eight Right.”
“Taxi/continue taxiing/proceed to the hangar.”
“Taxi/continue taxiing/proceed straight ahead then via
ramp to the hangar.”
“Taxi/continue taxiing/proceed on Taxiway Charlie, hold
short of Runway Two −Seven.”
or“Taxi/continue taxing/proceed on Charlie, hold short of
Runway Two −Seven.”
b.When authorizing an aircraft to taxi to an
assigned takeoff runway, state the departure runway
followed by the specific taxi route. Issue hold shortrestrictions when an aircraft will be required to hold
short of a runway or other points along the taxi route.
NOTE−
If the specific taxi route ends into a connecting taxiway with
the same identifier (for example, taxiway “A” connects
with T axiway “A1”) at the approach end of the runway, the
connecting taxiway may be omitted from the clearance.
PHRASEOLOGY −
RUNWAY (number), TAXI VIA (route as necessary). or
RUNWAY (number), TAXI VIA (route as necessary)(holdshort instructions as necessary).”
JO 7110.65W 12/10/15
3−7−3 Taxi and Ground Movement ProceduresEXAMPLE −
“Runway Three −Six Left, taxi via taxiway Alpha, hold
short of taxiway Charlie.”
or
“Runway Three −Six Left, taxi via Alpha, hold short of
Charlie.”
or
“Runway Three −Six Left, taxi via taxiway Alpha, hold
short of Runway Two −Seven Right.”
or
“Runway Three −Six Left, taxi via Charlie, cross Runway
Two−Seven Left, hold short of Runway Two −Seven Right.”
or
“Runway Three −Six Left, taxi via Alpha, Charlie, cross
Runway One −Zero.”
c.Aircraft/vehicles must receive a clearance for
each runway their route crosses. An aircraft/vehicle
must have crossed a previous runway before anotherrunway crossing clearance may be issued.
NOTE−
A clearance is required for aircraft/vehicles to operate on
any active, inactive, or closed runway except for vehiclesoperating on closed runways in accordance with a Letterof Agreement (LOA).
EXAMPLE −
“Cross Runway One −Six Left, hold short of Runway
One−Six Right.”
d.When an aircraft/vehicle is instructed to
“follow” traffic and requires a runway crossing, issue
a runway crossing clearance in addition to the followinstructions and/or hold short instructions, as
applicable.
EXAMPLE −
“Follow (traffic), cross Runway Two −Seven Right.”
or
“Follow (traffic), cross Runway Two Seven −Right, hold
short Runway Two −Seven Left.”
e.At those airports where the taxi distance
between runway centerlines is less than 1,000 feet,
multiple runway crossings may be issued with a
single clearance. The air traffic manager must submita request to the appropriate Terminal Services
Director of Operations for approval before
authorizing multiple runway crossings.
REFERENCE −
FAAO JO 7210.3, Para 10 −3−10 Multiple Runway Crossings.
f.Request a read back of runway hold short
instructions when it is not received from the
pilot/vehicle operator.
PHRASEOLOGY −
READ BACK HOLD INSTRUCTIONS.
EXAMPLE −
1.“American Four Ninety Two, Runway Three Six Left,
taxi via taxiway Charlie, hold short of Runway Two Seven
Right.”
or
“American Four Ninety Two, Runway Three Six Left, taxi
via Charlie, hold short of Runway Two Seven Right.”
“American Four Ninety Two, Roger.”
“American Four Ninety Two, r ead back hold instructions.”
2.“Cleveland Tower, American Sixty Three is ready for
departure.”
“American Sixty Three, hold short of Runway Two Three
Left, traffic one mile final.”
“American Sixty Three, Roger.”“American Sixty Three, read back hold instructions.”
3.“OPS Three proceed via taxiway Charlie hold short of
Runway Two Seven.”
or
“OPS Three pr oceed via Charlie hold short of Runway Two
Seven.”
“OPS Three, Roger.”
“OPS Three, read back hold instructions.”
NOTE−
Read back hold instructions phraseology may be initiatedfor any point on a movement area when the controller
believes the read back is necessary.
g.Issue progressive taxi/ground movement
instructions when:
1.A pilot/operator requests.
JO 7110.65W 12/10/15
3−7−4 Taxi and Ground Movement Procedures2.The specialist deems it necessary due to
traffic or field conditions, e.g., construction or closed
taxiways.
3.Necessary during reduced visibility,
especially when the taxi route is not visible from the
tower.
NOTE−
Progressive instructions may include step −by−step
directions and/or directional turns.
REFERENCE −
F AAO JO 7110.65, Para 3 −7−4, Runway Proximity.
F AAO JO 7110.65, Para 3 −11−1, Taxi and Ground Movement
Operation.
h.Issue instructions to expedite a taxiing aircraft
or a moving vehicle.
PHRASEOLOGY −
TAXI WITHOUT DELAY (traffic if necessary).
EXIT/PROCEED/CROSS
(runway/taxiway) WITHOUT DELAY.
i.Issue instructions to aircraft/vehicle to hold
short of an approach hold area.
PHRASEOLOGY −
HOLD SHORT OF (runway) APPROACH
3−7−3. GROUND OPERATIONS
WAKE TURBULENCE APPLICATION
Avoid clearances which require:
a.Super or heavy aircraft to use greater than
normal taxiing power.
b.Small aircraft or helicopters to taxi in close
proximity to taxiing or hover-taxi helicopters.
NOTE−
Use caution when taxiing smaller aircraft/helicopters inthe vicinity of larger aircraft.
REFERENCE −
AC 90−23, Air craft Wake Turbulence, Para 10 and Para 11.
3−7−4. RUNWAY PROXIMITY
Hold a taxiing aircraft or vehicle clear of the runway
as follows:
a.Instruct aircraft or vehicle to hold short of a
specific runway.b.Instruct aircraft or vehicle to hold at a specified
point.
c.Issue traffic information as necessary.
PHRASEOLOGY −
HOLD SHORT OF/AT (runway number or specific point),
(traffic or other information).
NOTE−
Establishing hold lines/signs is the responsibility of theairport manager. The standards for surface measur ements,
markings, and signs are contained in AC 150/5300−13,
Airport Design; AC 150/5340 −1, Standards for Airport
Markings, and AC 150/5340 −18, Standards for Airport
Sign Systems. The operator is responsible for properly
positioning the aircraft, vehicle, or equipment at theappropriate hold line/sign or designated point. Therequirements in para 3−1−12, Visually Scanning Runways,
remain valid as appropriate.
REFERENCE −
F AAO JO 7110.65, Para 3 −7−2, Taxi and Ground Movement
Operations.
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
F AAO JO 7110.65, Para 3 −1−5, Vehicles/Equipment/Personnel on
Runways.
3−7−5. PRECISION APPROACH CRITICAL
AREA
a.ILS critical area dimensions are described in
FAA Order 6750.16, Siting Criteria for Instrument
Landing Systems. Aircraft and vehicle access to the
ILS critical area must be controlled to ensure theintegrity of ILS course signals whenever conditions
are less than reported ceiling 800 feet or visibility less
than 2 miles. Do not authorize vehicles/aircraft tooperate in or over the critical area, except as specified
in subparagraph a1, whenever an arriving aircraft is
inside the ILS outer marker (OM) or the fix used inlieu of the OM unless the arriving aircraft has
reported the runway in sight or is circling to land on
another runway.
PHRASEOLOGY −
HOLD SHORT OF (runway) ILS CRITICAL AREA.
1.LOCALIZER CRITICAL AREA
(a)Do not authorize vehicle or aircraft
operations in or over the area when an arrivingaircraft is inside the ILS OM or the fix used in lieu of
the OM when conditions are less than reported ceiling
800 feet or visibility less than 2 miles, except:
(1)A preceding arriving aircraft on the
same or another runway that passes over or through
the area while landing or exiting the runway.
JO 7110.65W 12/10/15
3−7−5 Taxi and Ground Movement Procedures(2)A preceding departing aircraft or
missed approach on the same or another runway that
passes through or over the area.
(b)In addition to subparagraph a1(a), when
conditions are less than reported ceiling 200 feet orRVR 2,000 feet, do not authorize vehicles or aircraft
operations in or over the area when an arriving
aircraft is inside the middle marker, or in the absence
of a middle marker, ½ mile final.
2.GLIDESLOPE CRITICAL AREA. Do not
authorize vehicles or aircraft operations in or over the
area when an arriving aircraft is inside the ILS OM or
the fix used in lieu of the OM unless the arriving
aircraft has reported the runway in sight or is circling
to land on another runway when conditions are less
than reported ceiling 800 feet or visibility less than2 miles.
b.Operators commonly conduct “coupled” or
“autoland” approaches to satisfy maintenance,training, or reliability program requirements.
Promptly issue an advisory if the critical area will not
be protected when an arriving aircraft advises that a“coupled,” “CATIII,” “autoland,” or similar type
approach will be conducted and the weather indicates
a reported ceiling of 800 feet or more, or the visibilityis 2 miles or more.
PHRASEOLOGY −
ILS CRITICAL AREA NOT PROTECTED.
c.The Department of Defense (DOD) is author-
ized to define criteria for protection of precisionapproach critical areas at military controlled airports.
This protection is provided to all aircraft operating at
that military controlled airport. Waiver authority forDOD precision approach critical area criteria rests
with the appropriate military authority.
NOTE−
Signs and markings are installed by the airport operator to
define the ILS critical area. No point along the longitudinal
axis of the aircraft is permitted past the hold line for
holding purposes. The operator is responsible to properly
position the aircraft, vehicle, or equipment at the
appropriate hold line/sign or designated point. Therequirements in Para 3−1−12, Visually Scanning Runways,
remain valid as appropriate.
REFERENCE −
AC150/5340 −1, Standards for Airport Markings.3−7−6. PRECISION OBSTACLE FREE ZONE
(POFZ) AND FINAL APPROACH OBSTACLECLEARANCE SURFACES (OCS)
a.Ensure the POFZ is clear of traffic (aircraft or
vehicles) when an aircraft on a vertically −guided
final approach is within 2 miles of the runway
threshold and the reported ceiling is below 300 feet or
visibility is less than 3/4 SM to protect aircraftexecuting a missed approach.
NOTE−
Only horizontal surfaces (e.g., the wings) can penetrate the
POFZ, but not the vertical surfaces (e.g., fuselage or tail).
Three hundred feet (300) is used because ATC does not
measure ceilings in fifty (50) foot increments.
b.Ensure the final approach OCS (e.g., ILS /LPV
W, X, and Y surfaces) are clear of aircraft/vehicles
when an aircraft on the vertically −guided approach is
within 2 miles of the runway threshold and the
reported ceiling is below 800 feet or visibility is less
than 2 SM to protect aircraft executing a missedapproach.
NOTE−
1.The POFZ and the close −in portion of the final
approach obstacle clearance surfaces protect aircraftexecuting a missed approach. Their dimensions are
described in F AAO 8260.3b, Volume III, Chapter 3,
para 3.4, United States Standards for Terminal Instrument
Procedures.
2.Vehicles that are less than 10 feet in height, necessary
for the maintenance of the airport and/or navigation
facilities operating outside the movement ar ea, are exempt.
c.If it is not possible to clear the POFZ or OCS
prior to an aircraft reaching a point 2 miles from the
runway threshold and the weather is less than
described in subparas a or b above, issue traffic to the
landing aircraft.
NOTE−
The POFZ and/or OCS must be cleared as soon as
practical.
PHRASEOLOGY −
(ACID), IN THE EVENT OF MISSED APPROACH(issue traffic).
TAXIING AIRCRAFT/VEHICLE LEFT/RIGHT OF
RUNWAY.
EXAMPLE −
“United 623, in the event of missed approach, taxiingaircraft right of runway.”
“Delta 1058, in the event of missed approach, vehicle leftof runway.”5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−7−6 Taxi and Ground Movement ProceduresREFERENCE −
F AAO JO 7110.65, Para 3 −1−6, Traffic Information.
FIG 3−7−1
Precision Obstacle Free Zone (POFZ)
JO 7110.65W 12/10/15
3−8−1 Spacing and SequencingSection 8. Spacing and Sequencing
3−8−1. SEQUENCE/SPACING
APPLICATION
Establish the sequence of arriving and departing
aircraft by requiring them to adjust flight or ground
operation, as necessary, to achieve proper spacing.
PHRASEOLOGY −
CLEARED FOR TAKEOFF .
CLEARED FOR T AKEOFF OR HOLD SHORT/HOLD IN
POSITION/TAXI OFF THE RUNWAY (traffic).
EXTEND DOWNWIND.
MAKE SHORT APPROACH.
NUMBER (landing sequence number),FOLLOW (description and location of traffic),
or if traffic is utilizing another runway,
TRAFFIC (description and location) LANDING RUNWAY
(number of runway being used).
CIRCLE THE AIRPORT.
MAKE LEFT/RIGHT THREE −SIXTY/TWO SEVENTY.
GO AROUND (additional instructions as necessary).
CLEARED TO LAND.CLEARED:
TOUCH−AND−GO,
or
STOP−AND−GO,
or
LOW APPROACH.
CLEARED FOR THE OPTION,
or
OPTION APPROVED,
orUNABLE OPTION, (alternate instructions).
or
UNABLE (type of option), OTHER OPTIONS
APPROVED.
NOTE−
1.The “Clear ed for the Option” pr ocedure will permit an
instructor pilot/flight examiner/pilot the option to make atouch-and-go, low approach, missed approach, stop-and-go, or full stop landing. This procedure will only beused at those locations with an operational control tower
and will be subject to ATC approval. After ATC approval
of the option, the pilot should inform ATC as soon as
possible of any delay on the runway during their
stop-and-go or full stop landing.
2.For proper helicopter spacing, speed adjustments may
be more practical than course changes.
3.Read back of hold short instructions apply when hold
instructions are issued to a pilot in lieu of a takeoffclearance.
REFERENCE −
F AAO JO 7110.65, Para 3 −7−2, Taxi and Ground Movement
Operations.
AIM, Para 4 −3−22, Option Appr oach
3−8−2. TOUCH-AND-GO OR STOP-AND-GO
OR LOW APPROACH
Consider an aircraft cleared for touch-and-go,
stop-and-go, or low approach as an arriving aircraft
until it touches down (for touch-and-go), or makes a
complete stop (for stop-and-go), or crosses thelanding threshold (for low approach), and thereafter
as a departing aircraft.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−5, Vehicles/Equipment/Personnel on
Runways.
F AAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures.
3−8−3. SIMULTANEOUS SAME DIRECTION
OPERATION
Authorize simultaneous, same direction operations
on parallel runways, on parallel landing strips, or on
a runway and a parallel landing strip only when the
following conditions are met:
a.Operations are conducted in VFR conditions
unless visual separation is applied.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−8−2 Spacing and Sequencingb.Two-way radio communication is maintained
with the aircraft involved and pertinent traffic
information is issued.
c.The distance between the runways or landing
strips is in accordance with the minima in TBL 3 −8−1
(use the greater minimum if two categories areinvolved).
TBL 3−8−1
Same Direction Distance Minima
Aircraft categoryMinimum distance (feet)
between parallel
Runway
centerlinesEdges of
adjacent strips or
runway and strip
Lightweight,
single−engine,
propeller driven300 200
Twin−engine,
propeller driven500 400
All others 700 600
3−8−4. SIMULTANEOUS OPPOSITE
DIRECTION OPERATION
Authorize simultaneous opposite direction opera-
tions on parallel runways, on parallel landing strips,or on a runway and a parallel landing strip only when
the following conditions are met:
a.Operations are conducted in VFR conditions.
b.Two-way radio communication is maintained
with the aircraft involved and pertinent trafficinformation is issued.
PHRASEOLOGY −
TRAFFIC (description) ARRIVING/DEP ARTING/LOWAPPROACH, OPPOSITE DIRECTION ON P ARALLELRUNWAY/LANDING STRIP .
c.The distance between the runways or landing
strips is in accordance with the minima in
TBL 3−8−2.
TBL 3−8−2
Opposite Direction Distance Minima
Type of OperationMinimum distance (feet)
between parallel
Runway
centerlinesEdges of
adjacent strips
or runway and
strip
Between sunrise and
sunset1,400 1,400
Between sunset and sunrise 2,800 Not authorized3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−9−1 Departure Procedures and SeparationSection 9. Departure Procedures and Separation
3−9−1. DEPARTURE INFORMATION
Provide current departure information, as appropri-
ate, to departing aircraft.
a.Departure information contained in the ATIS
broadcast may be omitted if the pilot states the
appropriate ATIS code.
b.Issue departure information by including the
following:
1.Runway in use. (May be omitted if pilot states
“have the numbers.”)
2.Surface wind from direct readout dial, wind
shear detection system, or automated weather
observing system information display. (May be
omitted if pilot states “have the numbers.”)
3.Altimeter setting. (May be omitted if pilot
states “have the numbers.”)
REFERENCE −
F AAO JO 7110.65, Para 2 −7−1, Current Settings.
c.Time, when requested.
d.Issue the official ceiling and visibility, when
available, to a departing aircraft before takeoff asfollows:
1.To a VFR aircraft when weather is below
VFR conditions.
2.To an IFR aircraft when weather is below
VFR conditions or highest takeoff minima,whichever is greater.
NOTE−
Standard takeoff minimums are published in 14 CFRSection 91.175(f). T akeoff minima other than standard are
prescribed for specific airports/runways and published in
a tabular form supplement to the F AA instrument appr oach
procedures charts and appropriate F AA Forms 8260.
e.Issue the route for the aircraft/vehicle to follow
on the movement area in concise and easy tounderstand terms. The taxi clearance must include the
specific route to follow.
f.USAF NOT APPLICABLE. An advisory to
“check density altitude” when appropriate.
REFERENCE −
FAAO JO 7210.3, Para 2 −10−6, Broadcast Density Altitude Advisory.g.Issue braking action for the runway in use as
received from pilots or the airport management when
Braking Action Advisories are in effect.
REFERENCE −
F AAO JO 7110.65, Para 2 −7−2, Altimeter Setting Issuance Below
Lowest Usable FL.F AAO JO 7110.65, Para 3 −1−8, Low Level Wind Shear/Microburst
Advisories.
F AAO JO 7110.65, Para 3 −3−5, Braking Action Advisories.
P/CG Term − Braking Action Advisories.
h.When the ATIS is unavailable, and when the
runway length available for departure has been
temporarily shortened, controllers must ensure thatpilots receive the runway number combined with a
shortened announcement for all departing aircraft.
PHRASEOLOGY −
RUNWAY (NUMBER) SHORTENED
EXAMPLE −
“Runway Two-Seven shortened.”
3−9−2. DEPARTURE DELAY INFORMATION
USA/USAF/USN NOT APPLICABLE
When gate-hold procedures are in effect, issue the
following departure delay information as appropri-ate:
REFERENCE −
FAAO JO 7210.3, Para 10 −4−3, Gate Hold Procedures.
a.Advise departing aircraft the time at which the
pilot can expect to receive engine startup advisory.
PHRASEOLOGY −
GATE HOLD PROCEDURES ARE IN EFFECT. ALL
AIRCRAFT CONTACT (position) ON (frequency) FOR
ENGINE START TIME. EXPECT ENGINE START/TAXI(time).
b.Advise departing aircraft when to start engines
and/or to advise when ready to taxi.
PHRASEOLOGY −
START ENGINES, ADVISE WHEN READY TO TAXI,
or
ADVISE WHEN READY TO TAXI.
c.If the pilot requests to hold in a delay absorbing
area, the request must be approved if space and traffic
conditions permit.
d.Advise all aircraft on GC/FD frequency upon
termination of gate hold procedures.
JO 7110.65W 12/10/15
3−9−2 Departure Procedures and SeparationPHRASEOLOGY −
GATE HOLD PROCEDURES NO LONGER IN EFFECT.
3−9−3. DEPARTURE CONTROL
INSTRUCTIONS
Inform departing IFR, SVFR, VFR aircraft receiving
radar service, and TRSA VFR aircraft of the
following:
a.Before takeoff.
1.Issue the appropriate departure control
frequency and beacon code. The departure control
frequency may be omitted if a SID has been or will be
assigned and the departure control frequency is
published on the SID.
PHRASEOLOGY −
DEP ARTURE FREQUENCY (frequency), SQUAWK(code).
2.Inform all departing IFR military turboprop/
turbojet aircraft (except transport and cargo types) to
change to departure control frequency. If the local
controller has departure frequency override, transmit
urgent instructions on this frequency. If the overridecapability does not exist, transmit urgent instructions
on the emergency frequency.
PHRASEOLOGY −
CHANGE TO DEP ARTURE.
3.USAF. USAF control towers are authorized
to inform all departing IFR military transport/cargo
type aircraft operating in formation flight to change
to departure control frequency before takeoff.
b.After takeoff.
1.When the aircraft is about 1/2 mile beyond the
runway end, instruct civil aircraft, and military
transport, and cargo types to contact departure
control, provided further communication with you is
not required.
2.Do not request departing military turboprop/
turbojet aircraft (except transport and cargo types) to
make radio frequency or radar beacon changes before
the aircraft reaches 2,500 feet above the surface.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.3−9−4. LINE UP AND WAIT (LUAW)
a.The intent of LUAW is to position aircraft for an
imminent departure. Authorize an aircraft to line up
and wait, except as restricted in subpara g, whentakeoff clearances cannot be issued because of traf fic.
Issue traffic information to any aircraft so authorized.
Traffic information may be omitted when the trafficis another aircraft which has landed on or is taking off
the runway and is clearly visible to the holding
aircraft. Do not use conditional phrases such as“behind landing traffic” or “after the departing
aircraft.”
b.First state the runway number followed by the
line up and wait clearance.
PHRASEOLOGY −
RUNWAY (number), LINE UP AND WAIT.
c.Procedures.
1.At facilities without a safety logic system or
facilities with the safety logic system in the limited
configuration:
(a)Do not issue a landing clearance to an
aircraft requesting a full −stop, touch −and−go,
stop−and−go, option, or unrestricted low approach on
the same runway with an aircraft that is holding inposition or taxiing to line up and wait until the aircraft
in position starts takeoff roll.
(b)Do not authorize an aircraft to LUAW if
an aircraft has been cleared to land, touch −and−go,
stop−and–go, option, or unrestricted low approach on
the same runway.
PHRASEOLOGY −
RUNWAY (number), CONTINUE, TRAFFIC HOLDINGIN POSITION.
EXAMPLE −
“American 528, Runway Two −Three continue, traffic
holding in position.”
2.Except when reported weather conditions are
less than ceiling 800 feet or visibility less than 2
miles, facilities using the safety logic system in the
full core alert mode:
(a)May issue a landing clearance for a
full−stop, touch −and−go, stop−and−go, option, or
unrestricted low approach to an arriving aircraft with
an aircraft holding in position or taxiing to LUAW on
the same runway, or
(b)May authorize an aircraft to LUAW when
an aircraft has been cleared for a full stop,
JO 7110.65W 12/10/15
3−9−3 Departure Procedures and Separationtouch−and−go, stop−and−go, option, or unrestricted
low approach on the same runway.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−5, Landing Clearance.
d.When an aircraft is authorized to line up and
wait, inform it of the closest traffic requesting a
full−stop, touch −and−go, stop−and− go, option, or
unrestricted low approach to the same runway.
EXAMPLE −
“United Five, Runway One Eight, line up and wait. T raffic
a Boeing Seven Thirty Seven, six mile final.
e.USAF/USN . When an aircraft is authorized to
line up and wait, inform it of the closest traf fic within
6 miles on final approach to the same runway. If theapproaching aircraft is on a different frequency,
inform it of the aircraft taxiing into position.
f.Do not authorize an aircraft to line up and wait
when the departure point is not visible from the tower,
unless the aircraft’s position can be verified by ASDE
or the runway is used for departures only.
g.An aircraft may be authorized to line up and
wait at an intersection between sunset and sunrise
under the following conditions:
1.The procedure must be approved by the
appropriate Director, Terminal Operations (service
area) as well as the Director, Terminal Safety and
Operations Support.
2.The procedure must be contained in a facility
directive.
3.The runway must be used as a departure −only
runway.
4.Only one aircraft at a time is permitted to line
up and wait on the same runway.
5.Document on FAA Form 7230 −4, Daily
Record of Facility Operation, the following: “LUAW
at INT of RWY (number) and TWY (name) INEFFECT” when using runway as a departure −only
runway. “LUAW at INT of RWY (number) and TWY
(name) SUSPENDED” when runway is not used asa departure −only runway.
h.Do not authorize an aircraft to line up and wait
at anytime when the intersection is not visible from
the tower.
i.Do not authorize aircraft to simultaneously line
up and wait on the same runway, between sunrise andsunset, unless the local assist/local monitor position
is staffed.
j.USN . Do not authorize aircraft to line up and
wait simultaneously on intersecting runways.
PHRASEOLOGY −
CONTINUE HOLDING,
or
TAXI OFF THE RUNWAY.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
k.When aircraft are authorized to line up and wait
on runways that intersect, traffic must be exchanged
between that aircraft and the aircraft that is authorized
to line up and wait, depart, or arrive to the intersectingrunway(s).
EXAMPLE −
“United Five, Runway Four, line up and wait, trafficholding Runway Three −One.”
“Delta One, Runway Three −One, line up and wait, traffic
holding Runway Four.”
Or, when issuing traffic information to an arrival aircraft
and an aircraft that is holding on runway(s) thatintersect(s):
“Delta One, Runway Four, line up and wait, traffic landing
Runway Three −One.”
“United Five, Runway Three −One, cleared to land. T raffic
holding in position Runway Four.”
Or, when issuing traffic information to a departing air craft
and an aircraft that is holding on runway(s) thatintersect(s):
“Delta One, Runway Three −One, line up and wait, traffic
departing Runway Four.”
“United Five, Runway Four, cleared for takeoff, trafficholding in position Runway Three −One.”
REFERENCE −
F AAO JO 7110.65, Para 3 −9−8, Intersecting Runway/Intersecting
Flight Path Operations.
F AAO JO 7110.65, Para 3 −10−4, Intersecting Runway/Intersecting
Flight Path Separation.
l.When a local controller delivers or amends an
ATC clearance to an aircraft awaiting departure andthat aircraft is holding short of a runway or is holding
in position on a runway, an additional clearance must
be issued to prevent the possibility of the aircraftinadvertently taxiing onto the runway and/or
beginning takeoff roll. In such cases, append one of
the following ATC instructions as appropriate:
JO 7110.65W 12/10/15
3−9−4 Departure Procedures and Separation1.HOLD SHORT OF RUNWAY , or
2.HOLD IN POSITION.
m.USAF/USN. When issuing additional instruc-
tions or information to an aircraft holding in takeoff
position, include instructions to continue holding ortaxi off the runway, unless it is cleared for takeoff.
PHRASEOLOGY −
CONTINUE HOLDING,
or
TAXI OFF THE RUNWAY.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
n.When authorizing an aircraft to line up and wait
at an intersection, state the runway intersection.
PHRASEOLOGY −
RUNWAY (number) AT (taxiway designator), LINE UP
AND WAIT.
o.When two or more aircraft call the tower ready
for departure, one or more at the full length of a
runway and one or more at an intersection, state the
location of the aircraft at the full length of the runway
when authorizing that aircraft to line up and wait.
PHRASEOLOGY −
RUNWAY (number), FULL −LENGTH, LINE UP AND
WAIT.
EXAMPLE −
“American Four Eighty Two, Runway Three −Zero full
length, line up and wait.”
NOTE−
The controller need not state the location of the aircraftdeparting the full length of the runway if there are no
aircraft holding for departure at an intersection for that
same runway.
p.Do not use the term “full length” when the
runway length available for departure has been
temporarily shortened. On permanently shortenedrunways, do not use the term “full length” until the
Chart Supplement U.S . is updated to include the
change(s).
NOTE−
The use of the term “full length” could be interpreted by the
pilot(s) as the available runway length prior to the runway
being shortened .
q.Whenever a runway length has been temporar-
ily or permanently shortened, state the word“shortened” immediately following the runway
number as part of the line up and wait clearance.
1.The addition of “shortened” must be included
in the line up and wait clearance for the duration of the
construction project when the runway is temporarily
shortened.
2.The addition of “shortened” must be included
in the line up and wait clearance until the Chart
Supplement U.S . is updated to include the change(s)
when the runway is permanently shortened.
PHRASEOLOGY −
RUNWAY (number) SHORTENED, LINE UP AND WAIT.
EXAMPLE −
“Runway Two-Seven shortened, line up and wait.”
REFERENCE −
F AAO JO 7210.3, Para 10-3-11, Airport Construction
F AAO JO 7210.3, Para 10-3-12, Change in Runway Length Due to
Construction
3−9−5. ANTICIPATING SEPARATION
Takeoff clearance needs not be withheld until
prescribed separation exists if there is a reasonable
assurance it will exist when the aircraft starts takeoff
roll.
REFERENCE −
P/CG Term − Clear of the Runway.
3−9−6. SAME RUNWAY SEPARATION
Separate a departing aircraft from a preceding
departing or arriving aircraft using the same runway
by ensuring that it does not begin takeoff roll until:
a.The other aircraft has departed and crossed the
runway end or turned to avert any conflict. (See
FIG 3−9−1.) If you can determine distances by
reference to suitable landmarks, the other aircraftneeds only be airborne if the following minimum
distance exists between aircraft: (See FIG 3−9−2.)
1.When only Category I aircraft are involved −
3,000 feet.
2.When a Category I aircraft is preceded by a
Category II aircraft − 3,000 feet.
3.When either the succeeding or both are
Category II aircraft − 4,500 feet.
4.When either is a Category III aircraft −
6,000 feet.
5.When the succeeding aircraft is a helicopter,
visual separation may be applied in lieu of using
distance minima.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−9−5 Departure Procedures and SeparationFIG 3−9−1
Same Runway Separation
[View 1]
FIG 3−9−2
Same Runway Separation
[View 2]
NOTE−
Aircraft same runway separation (SRS) categories arespecified in F AA Order JO 7360.1, Aircraft Type
Designators and based upon the following definitions:
CATEGORY I /C0042 small single −engine propeller driven
aircraft weighing 12,500 lbs. or less, and all helicopters.
CATEGORY II /C0042 small twin −engine propeller driven
aircraft weighing 12,500 lbs. or less.
CATEGORY III /C0042 all other aircraft.
b.A preceding landing aircraft is clear of the
runway. (See FIG 3−9−3.)FIG 3−9−3
Preceding Landing Aircraft Clear of Runway
REFERENCE −
P/CG Term − Clear of the Runway.
WAKE TURBULENCE APPLICATION
c.Do not issue clearances which imply or indicate
approval of rolling takeoffs by super or heavy aircraft
except as provided in Para 3 −1−14, Ground
Operations When V olcanic Ash is Present.
d.Do not issue clearances to a small aircraft to line
up and wait on the same runway behind a departing
super or heavy aircraft to apply the necessaryintervals.
REFERENCE −
AC 90−23, Air craft Wake Turbulence.
e.The minima in Para 5-5-4, Minima, subpara-
graph g, may be applied in lieu of the time interval
requirements in subparagraphs f and g. When Para
5-5-4, Minima, is applied, ensure that the appropriate
radar separation exists at or prior to the time an
aircraft becomes airborne.
NOTE−
The pilot may request additional separation, but should
make this request before taxiing on the runway.
f.Separate IFR/VFR aircraft taking off from the
same runway or a parallel runway separated by less
than 2,500 feet:
NOTE−
Takeoff clearance to the following aircraft should not beissued until the time interval has passed after the pr eceding
aircraft begins takeoff roll.
1.Heavy, large, or small behind super − 3
minutes.
2.Heavy, large, or small behind heavy − 2
minutes.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−9−6 Departure Procedures and Separationg.Separate a small aircraft behind a B757 by 2
minutes when departing the same runway .
FIG 3−9−4
Same Runway Separation
h.Separate aircraft when operating on a runway
with a displaced landing threshold if projected flight
paths will cross when either a departure follows an
arrival or an arrival follows a departure by the
following minima:
1.Heavy, large, or small behind super − 3
minutes.
2.Heavy, large, or small behind heavy − 2
minutes.
3.Small behind B757 − 2 minutes.
i.Separate an aircraft behind another aircraft that
has departed or made a low/missed approach when
utilizing opposite direction takeoffs or landings on
the same or parallel runways separated by less than2,500 feet by the following minima:
1.Heavy, large, or small behind super − 4
minutes.
2.Heavy, large, or small behind heavy − 3
minutes
j.Separate a small aircraft behind a B757 that has
departed or made a low/missed approach when
utilizing opposite direction takeoffs or landings onthe same runway by − 3 minutes.
k.Do not approve pilot requests to deviate from
the required intervals contained in subparagraphs fthrough j.
PHRASEOLOGY −
HOLD FOR WAKE TURBULENCE.REFERENCE −
F AAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures.
l.Separate a small aircraft behind a large aircraft
(except B757) that has departed or made a
low/missed approach when utilizing opposite
direction takeoffs on the same runway by 3 minutes
unless a pilot has initiated a request to deviate from
the time interval. In the latter case, issue a waketurbulence cautionary advisory before clearing the
aircraft for takeoff. Controllers must not initiate or
suggest a waiver of the time interval.
NOTE−
A request for takeoff does not initiate a waiver request.
m.Inform aircraft when it is necessary to hold in
order to provide the required time interval.
3−9−7. WAKE TURBULENCE SEPARATION
FOR INTERSECTION DEPARTURES
a.Apply the following wake turbulence criteria
for intersection departures:
1.Separate a small aircraft weighing 12,500 lbs.
or less taking off from an intersection on the same
runway (same or opposite direction takeoff) behind a
departing small aircraft weighing more than 12,500
lbs. by ensuring that the aircraft does not start takeoff
roll until at least 3 minutes after the preceding aircraft
has taken off.
2.Separate a small aircraft taking off from an
intersection on the same runway (same or oppositedirection takeoff) behind a departing large aircraft
(except B757) by ensuring that the aircraft does not
start takeoff roll until at least 3 minutes after the
preceding aircraft has taken off.
3.Separate a small aircraft taking off from an
intersection on the same runway (same or oppositedirection takeoff) behind a departing B757 by
ensuring that the aircraft does not start takeoff roll
until at least 3 minutes after the preceding aircraft has
taken off.
4.Separate aircraft departing from an
intersection on the same runway (same or oppositedirection takeoff), parallel runways separated by less
than 2,500 feet, and parallel runways separated by
less than 2,500 feet with the runway thresholds of fset
by 500 feet or more, by ensuring that the aircraft does
not start take-off roll until the following intervals
exist after the preceding aircraft has taken off:3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−9−7 Departure Procedures and SeparationNOTE−
Apply Para 3-9-6, Same Runway Separation, subpara-
graph f to parallel runways separated by less than 2,500
feet with runway thresholds offset by less than 500 feet.
(a)Heavy, large, or small behind super - 4
minutes.
(b)Heavy, large, or small behind heavy - 3
minutes.
5.Inform aircraft when it is necessary to hold in
order to provide the required time interval.
PHRASEOLOGY −
HOLD FOR WAKE TURBULENCE.
NOTE−
Aircraft conducting touch-and-go and stop-and-gooperations are considered to be departing from an
intersection.
REFERENCE −
F AAO JO 7110.65, Para 3 −8−2, Touch−and−Go or Stop −and−Go or
Low Approach.
b.The time interval is not required when:
1.A pilot has initiated a request to deviate from
the time intervals contained in subparagraph a1 or a2.
NOTE−
A request for takeoff does not initiate a waiver request; the
request for takeoff must be accomplished by a request to
deviate from the time interval.
2.USA NOT APPLICABLE. The intersection
is 500 feet or less from the departure point of the
preceding aircraft and both aircraft are taking off in
the same direction.
3.Successive touch-and-go or stop-and-go
operations are conducted with any aircraft following
an aircraft in the pattern that requires wake turbulence
separation, or an aircraft departing the same runway
that requires wake turbulence separation in
accordance with subparagraphs a1, a2, a3, or a4
(except for super aircraft), provided the pilot is
maintaining visual separation/spacing behind the
preceding aircraft. Issue a wake turbulencecautionary advisory and the position of the larger
aircraft.
NOTE−
Not authorized with a Super as the lead or departure
aircraft.
REFERENCE −
F AAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
F AAO JO 7110.65, Para 7-2-1, Visual Separation4.If action is initiated to reduce the separation
between successive touch-and-go or stop-and-go
operations, apply the appropriate separation con-
tained in subparagraph a1, a2, a3, or a4.
c.When applying the provision of subpara b:
1.Issue a wake turbulence advisory before
clearing the aircraft for takeoff.
2.Do not clear the intersection departure for an
immediate takeoff.
3.Issue a clearance to permit the trailing aircraft
to deviate from course enough to avoid the flight pathof the preceding aircraft when applying subpara b1 or
b2.
4.Separation requirements in accordance with
Para 3−9−6, Same Runway Separation, must also
apply.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−6, Same Runway Separation.
3−9−8. INTERSECTING RUNWAY/INTER-
SECTING FLIGHT PATH OPERATIONS
a.Issue traffic information to each aircraft
operating on intersecting runways.
b.Separate departing aircraft from another
aircraft using an intersecting runway by ensuring that
the departure does not begin takeoff roll until one of
the following exists:
REFERENCE −
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
1.The preceding aircraft has departed and
passed the intersection or is turning to avert any
conflict. (See FIG 3−9−5).
FIG 3−9−5
Intersecting Runway Separation
JO 7110.65W 12/10/15
3−9−8 Departure Procedures and Separation2.A preceding arriving aircraft is clear of the
landing runway, completed the landing roll and will
hold short of the intersection, or has passed the
intersection. (See FIG 3-9-6) .
REFERENCE −
P/CG Term − Clear of the Runway.
FIG 3−9−6
Intersecting Runway Separation
WAKE TURBULENCE APPLICATION
3.Separate IFR/VFR aircraft taking off behind
a departing or landing aircraft on an intersecting
runway if flight paths will cross (see FIG 3-9-7 and
FIG 3-9-8), or an aircraft departing a parallel runway
separated by 2,500 feet or more if projected flights
will cross (see FIG 3-9-9):
NOTE−
Takeoff clearance to the following aircraft should not be
issued until the appropriate time interval has passed after
the preceding aircraft began takeoff roll.
(a)Heavy, large, or small behind super − 3
minutes.
(b)Heavy, large, or small behind heavy − 2
minutes.
(c)Small behind B757 − 2 minutes.FIG 3−9−7
Departure Behind Departure on Intersecting Runway
FIG 3−9−8
Departure Behind Arrival on Intersecting Runway
FIG 3−9−9
Parallel Runway
4.Pilot requests to deviate from the required
time intervals must not be approved if the preceding
aircraft requires wake turbulence separation.
JO 7110.65W 12/10/15
3−9−9 Departure Procedures and SeparationREFERENCE −
F AAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
3−9−9. NONINTERSECTING CONVERGING
RUNWAY OPERATIONS
a.Separate departing aircraft from an aircraft
using a nonintersecting runway when the flight paths
intersect by ensuring that the departure does not begin
takeoff roll until one of the following exists:
REFERENCE −
FAAO JO 7110.65, Para 2 −1−21, T raffic Advisories.
1.The preceding aircraft has departed and
crossed the departure runway, or is turning to avertany conflict. (See FIG 3 −9−10).
FIG 3−9−10
Intersecting Runway Separation
2.A preceding arriving aircraft has completed
the landing roll and will hold short of the projectedintersection, passed the projected intersection, or has
crossed over the departure runway (See FIG 3 −9−11
and FIG 3-9-12).FIG 3−9−11
Intersecting Runway Separation
FIG 3−9−12
Intersecting Runway Separation
b.If the extended centerline of a runway crosses a
converging runway or the extended centerline of a
converging runway at a distance of 1NM or less from
either departure end, apply the provisions of
Paragraph 3 −9−8, Intersecting Runway Separation,
unless: The facility is using aids specified in a facility
directive, (may include but are not limited to,
Arrival/Departure Window (ADW), ASDE −X
Virtual Runway Intersection Point (VRIP), cut −off
points or automation). (See FIG 3 −9−15 and
FIG 3−9−16).
REFERENCE −
F AAO JO 7210.3, Para 10-3-14, Go-Around/Missed Approach5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−9−10 Departure Procedures and SeparationWAKE TURBULENCE APPLICATION
FIG 3−9−13
Intersecting Runway Separation
FIG 3−9−14
Intersecting Runway Separation
c.Separate IFR/VFR aircraft taking off behind a
departing aircraft on a crossing runway if projected
flight paths will cross (See FIG 3−9−15):
1.Heavy, large, or small behind super − 3
minutes.
2.Heavy, large, or small behind heavy − 2
minutes.
3.Small behind B757 − 2 minutes.FIG 3−9−15
Intersecting Runway Separation
NOTE−
Takeoff clearance to the following aircraft should not beissued until the time interval has passed from when thepreceding aircraft began takeoff roll.
d.Separate IFR/VFR aircraft departing behind a
landing aircraft on a crossing runway if the departure
will fly through the airborne path of the arrival (See
FIG 3−9−16):
1.Heavy, large, or small behind super − 3
minutes.
2.Heavy, large, or small behind heavy − 2
minutes.
3.Small behind B757 − 2 minutes.
FIG 3−9−16
Intersecting Runway Separation
e.Do not approve pilot requests to deviate from
the required time interval if the preceding aircraft
requires wake turbulence separation .3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−9−11 Departure Procedures and SeparationREFERENCE −
F AAO JO 7110.65, Para 5-8-3, Successive or SimultaneousDepartures.
F AAO JO 7110.65, Para 5-8-5, Departures and Arrivals on Parallel or
Nonintersecting Diverging Runways.F AAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
3−9−10. TAKEOFF CLEARANCE
a.When issuing a clearance for takeoff, first state
the runway number followed by the takeoff
clearance.
PHRASEOLOGY −
RUNWAY (number), CLEARED FOR TAKEOFF .
EXAMPLE −
“RUNWAY TWO SEVEN, CLEARED FOR TAKEOFF .”
NOTE−
Turbine−powered aircraft may be considered ready for
takeoff when they reach the runway unless they adviseotherwise.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−1, Departure Terminology.
b.When clearing an aircraft for takeoff from an
intersection, state the runway intersection.
PHRASEOLOGY −
RUNWAY (number) AT (taxiway designator) CLEAREDFOR TAKEOFF .
c.When two or more aircraft call the tower ready
for departure, one or more at the full length of a
runway and one or more at an intersection, state the
location of the aircraft at the full length of the runway
when clearing that aircraft for takeoff.
PHRASEOLOGY −
RUNWAY (number), FULL LENGTH, CLEARED FORTAKEOFF .
EXAMPLE −
“American Four Eighty Two, Runway Three Zero fulllength, cleared for takeoff.”
d.The controller must ensure that all runways
along the taxi route that lead to the departure runway
are crossed before the takeoff clearance is issued,
except as stated in para 3 −9−9e.FIG 3−9−17
Runway/Taxiway Proximity
e.At those airports where the airport configuration
does not allow for an aircraft to completely cross one
runway and hold short of the departure runway and/or
where airports do not have runway hold markings
between runways, state the runway to be crossed with
the takeoff clearance if the aircraft is not able to
complete a runway crossing before reaching its
departure runway.
PHRASEOLOGY −
CROSS RUNWAY (number), RUNWAY (number)CLEARED FOR TAKEOFF .
EXAMPLE −
“CROSS RUNWAY TWO FOUR LEFT, RUNWAY TWO
FOUR RIGHT, CLEARED FOR TAKEOFF .”5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−9−12 Departure Procedures and SeparationFIG 3−9−18
Runway/Taxiway Proximity
REFERENCE −
FAAO JO 7210.3, Para 10 −3−9, Takeoff Clearance.
P/CG Term − Clear of the Runway.
f.Do not use the term “full length” when the
runway length available for departure has been
temporarily shortened. On permanently shortened
runways, do not use the term “full length” until the
Chart Supplement U.S . is updated to include the
change(s).
NOTE−
The use of the term “full length” could be interpreted by thepilot(s) as the available runway length prior to the runway
being shortened.
g.Whenever a runway length has been temporar-
ily or permanently shortened, state the word“shortened” immediately following the runway
number as part of the takeoff clearance. This
information must be issued in conjunction with thetakeoff clearance.
1.The addition of “shortened” must be included
in the takeoff clearance for the duration of the
construction project when the runway is temporarily
shortened.
2.The addition of “shortened” must be included
in the takeoff clearance until the Chart SupplementU.S. is updated to include the change(s) when the
runway is permanently shortened.
PHRASEOLOGY −
RUNWAY (number) SHORTENED, CLEARED FOR
TAKEOFF .
EXAMPLE −
“Runway Two-Seven shortened, cleared for takeoff.”
PHRASEOLOGY −
RUNWAY (number) AT (taxiway designator)INTERSECTION DEP ARTURE SHORTENED,CLEARED FOR TAKEOFF .
EXAMPLE −
“Runway Two-Seven at Juliet, intersection departureshortened, cleared for takeoff.”
REFERENCE −
F AAO JO 7210.3, Para 10-3-11, Airport Construction
F AAO JO 7210.3, Para 10-3-12, Change in Runway Length Due to
Construction
h.USAF. When an aircraft is cleared for takeoff,
inform it of the closest traf fic within 6 miles on final
approach to the same runway. If the approaching
aircraft is on a different frequency, inform it of the
departing aircraft.
i.USA/USN/USAF . Issue surface wind and
takeoff clearance to aircraft.
PHRASEOLOGY −
RUNWAY ( number), WIND (surface wind in dir ection and
velocity). CLEARED FOR TAKEOFF .
3−9−11. CANCELLATION OF TAKEOFF
CLEARANCE
Cancel a previously issued clearance for takeoff and
inform the pilot of the reason if circumstancesrequire. Once an aircraft has started takeoff roll,
cancel the takeoff clearance only for the purpose of
safety.
NOTE−
In no case should a takeoff clearance be canceled after an
aircraft has started its takeoff roll solely for the purpose of
meeting traffic management requirements/EDCT.
PHRASEOLOGY −
CANCEL TAKEOFF CLEARANCE (reason).3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−10−1 Arrival Procedures and SeparationSection 10. Arrival Procedures and Separation
3−10−1. LANDING INFORMATION
Provide current landing information, as appropriate,
to arriving aircraft. Landing information contained in
the ATIS broadcast may be omitted if the pilot states
the appropriate ATIS code. Runway, wind, and
altimeter may be omitted if a pilot uses the phrase
“have numbers.” Issue landing information byincluding the following:
NOTE−
Pilot use of “have numbers” does not indicate receipt of the
ATIS broadcast.
a.Specific traffic pattern information (may be
omitted if the aircraft is to circle the airport to the left).
PHRASEOLOGY −
ENTER LEFT/RIGHT BASE.
STRAIGHT −IN.
MAKE STRAIGHT −IN.
STRAIGHT −IN APPROVED.
RIGHT TRAFFIC.MAKE RIGHT TRAFFIC.
RIGHT TRAFFIC APPROVED.
CONTINUE.
NOTE−
Additional information should normally be issued with
instructions to continue. Example: “continue, report one
mile final”; “continue, expect landing clearance two milefinal”; etc.
b.Runway in use.
c.Surface wind.
d.Altimeter setting.
REFERENCE −
F AAO JO 7110.65, Para 2 −7−1, Current Settings.
e.Any supplementary information.
f.Clearance to land.
g.Requests for additional position reports. Use
prominent geographical fixes which can be easily
recognized from the air, preferably those depicted onsectional charts. This does not preclude the use of the
legs of the traffic pattern as reporting points.
NOTE−
At some locations, VFR checkpoints are depicted onsectional aeronautical and terminal area charts. In
selecting geographical fixes, depicted VFR checkpoints
are preferred unless the pilot exhibits a familiarity with the
local area.
h.Ceiling and visibility if either is below basic
VFR minima.
i.Low level wind shear or microburst advisories
when available.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−8 , Low Level Wind Shear/Microburst
Advisories.
j.Issue braking action for the runway in use as
received from pilots or the airport management when
Braking Action Advisories are in effect.
REFERENCE −
F AAO JO 7110.65, Para 3 −3−5 , Braking Action Advisories.
k.If the pilot does not indicate the appropriate
ATIS code, and when a runway has been shortened,
controllers must ensure that pilots receive the runway
number combined with a shortened announcement
for all arriving aircraft.
3−10−2. FORWARDING APPROACH
INFORMATION BY NONAPPROACH
CONTROL FACILITIES
a.Forward the following, as appropriate, to the
control facility having IFR jurisdiction in your area.You may eliminate those items that, because of local
conditions or situations, are fully covered in a letter
of agreement or a facility directive.
1.When you clear an arriving aircraft for a
visual approach.
REFERENCE −
F AAO JO 7110.65, Para 7 −4−1 , Visual Approach.
2.Aircraft arrival time.
3.Cancellation of IFR flight plan.
4.Information on a missed approach,
unreported, or overdue aircraft.
5.Runway in use.
6.Weather as required.
JO 7110.65W 12/10/15
3−10−2 Arrival Procedures and SeparationREFERENCE −
F AAO JO 7110.65, Para 2 −6−6 , Reporting Weather Conditions.
b.When the weather is below 1,000 feet or 3 miles
or the highest circling minimums, whichever is
greater, issue current weather to aircraft executing an
instrument approach if it changes from that on the
ATIS or that previously forwarded to the center/approach control.
3−10−3. SAME RUNWAY SEPARATION
a.Separate an arriving aircraft from another
aircraft using the same runway by ensuring that thearriving aircraft does not cross the landing threshold
until one of the following conditions exists or unless
authorized in para 3−10−10, Altitude Restricted Low
Approach.
1.The other aircraft has landed and is clear of
the runway. (See FIG 3−10−1.) Between sunrise and
sunset, if you can determine distances by reference to
suitable landmarks and the other aircraft has landed,it need not be clear of the runway if the following
minimum distance from the landing threshold exists:
REFERENCE −
P/CG Term − Clear of the Runway.
FIG 3−10−1
Same Runway Separation
(a)When a Category I aircraft is landing
behind a Category I or II − 3,000 feet .
(See FIG 3−10−2.)FIG 3−10−2
Same Runway Separation
(b)When a Category II aircraft is landing
behind a Category I or II − 4,500 feet.
(See FIG 3−10−3.)
FIG 3−10−3
Same Runway Separation
2.The other aircraft has departed and crossed
the runway end. (See FIG 3−10−4). If you can
determine distances by reference to suitablelandmarks and the other aircraft is airborne, it need
not have crossed the runway end if the following
minimum distance from the landing threshold exists:
(a)Category I aircraft landing behind
Category I or II − 3,000 feet .
(b)Category II aircraft landing behind
Category I or II − 4,500 feet.
(c)When either is a category III aircraft −
6,000 feet . (See FIG 3−10−5.)
JO 7110.65W 12/10/15
3−10−3 Arrival Procedures and SeparationFIG 3−10−4
Same Runway Separation
FIG 3−10−5
Same Runway Separation
3.When the succeeding aircraft is a helicopter,
visual separation may be applied in lieu of usingdistance minima.
WAKE TURBULENCE APPLICATION
b.Issue wake turbulence advisories, and the
position, altitude if known, and the direction of flight
of:
1.The super or heavy to aircraft landing behind
a departing/arriving super or heavy on the same or
parallel runways separated by less than 2,500 feet.
2.The B757/large aircraft to a small aircraft
landing behind a departing/arriving B757/large
aircraft on the same or parallel runways separated by
less than 2,500 feet.REFERENCE −
AC 90−23, Air craft Wake Turbulence, Para 12, Pilot Responsibility.
F AAO JO 7110.65, Para 3 −10−10, Altitude Restricted Low Approach.
EXAMPLE −
1. “Runway two seven left cleared to land, caution wake
turbulence, heavy Boeing 747 departing runway two seven
right.”
2.“Number two follow Boeing 757 on two-mile final.
Caution wake turbulence.”
3−10−4. INTERSECTING RUNWAY/INTER-
SECTING FLIGHT PATH SEPARATION
Issue traffic information to each aircraft operating on
intersecting runways.
a.Separate an arriving aircraft using one runway
from another aircraft using an intersecting runway or
a nonintersecting runway when the flight pathsintersect by ensuring that the arriving aircraft does
not cross the landing threshold or flight path of the
other aircraft until one of the following conditionsexists:
REFERENCE −
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
1.The preceding aircraft has departed and
passed the intersection/flight path or is airborne and
turning to avert any conflict.(See FIG 3−10−6 and FIG 3−10−7.)
FIG 3−10−6
Intersecting Runway Separation
JO 7110.65W 12/10/15
3−10−4 Arrival Procedures and SeparationFIG 3−10−7
Intersecting Runway Separation
2.A preceding arriving aircraft is clear of the
landing runway, completed landing roll and will hold
short of the intersection/flight path, or has passed the
intersection/flight path.
(See FIG 3−10−8 and FIG 3−10−9.)
FIG 3−10−8
Intersection Runway Separation
FIG 3−10−9
Intersection Runway Separation
NOTE−
When visual separation is being applied by the tower,
appropriate control instructions and traffic advisoriesmust be issued to ensure go around or missed approachesavert any conflict with the flight path of traffic on the other
runway.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation, subpara a2.
b.“USA/USAF/USN NOT APPLICABLE.” An
aircraft may be authorized to takeoff from onerunway while another aircraft lands simultaneously
on an intersecting runway or an aircraft lands on one
runway while another aircraft lands simultaneouslyon an intersecting runway, or an aircraft lands to hold
short of an intersecting taxiway or some other
predetermined point such as an approach/departureflight path using procedures specified in the current
LAHSO directive. The procedure must be approved
by the air traffic manager and be in accordance witha facility directive. The following conditions apply:
NOTE−
Application of these procedures does not relieve
controllers from the responsibility of providing otherappropriate separation contained in this order.
REFERENCE −
F AAO JO 7210.3, Para 10 −3−7, Land and Hold Short Operations
(LAHSO).
1.A simultaneous takeoff and landing operation
must only be conducted in VFR conditions.
2.Instruct the landing aircraft to hold short of
the intersecting runway being used by the aircraft
taking off. In the case of simultaneous landings andno operational benefit is lost, restrict the aircraft of
the lesser weight category (if known). LAHSO
clearances must only be issued to aircraft that are
JO 7110.65W 12/10/15
3−10−5 Arrival Procedures and Separationlisted in the current LAHSO directive, whose
Available Landing Distance (ALD) does not exceed
the landing distance requirement for the runway
condition.
PHRASEOLOGY −
HOLD SHORT OF RUNWAY (runway number), (traffic,type aircraft or other information).
NOTE−
Pilots who prefer to use the full length of the runway or arunway different fr om that specified are expected to advise
ATC prior to landing.
3.Issue traffic information to both aircraft
involved and obtain an acknowledgment from each.
Request a read back of hold short instructions whenthey are not received from the pilot of the restricted
aircraft.
EXAMPLE −
1.“Runway one eight cleared to land, hold short of
runway one four left, traffic, (type aircraft) landing runway
one four left.”
(When pilot of restricted aircraft responds with only
acknowledgment):
“Runway one four left cleared to land, traffic, (type
aircraft) landing runway one eight will hold short of theintersection.”
“Read back hold short instructions.”
2.“Runway three six cleared to land, hold short of runway
three three, traffic, (type aircraft) departing runway three
three.”
“Traffic, (type aircraft) landing runway three six will hold
short of the intersection, runway three three cleared fortakeoff.”
4.Issue the measured distance from the landing
threshold to the hold short point rounded “down” to
the nearest 50 −foot increment if requested by either
aircraft.
EXAMPLE −
“Five thousand fifty feet available.”
5.The conditions in subparas b2, 3, and 4 must
be met in sufficient time for the pilots to take otheraction, if desired, and no later than the time landing
clearance is issued.
6.Land and Hold Short runways must be free of
any contamination as described in the currentLAHSO directive, with no reports that braking action
is less than good.
7.There is no tailwind for the landing aircraft
restricted to hold short of the intersection. The wind
may be described as “calm” when appropriate.
REFERENCE −
F AAO JO 7110.65, Para 2 −6−5, Calm Wind Conditions.
8.The aircraft required landing distances are
listed in the current LAHSO directive.
9.STOL aircraft operations are in accordance
with a letter of agreement with the aircraftoperator/pilot or the pilot confirms that it is a STOL
aircraft.
WAKE TURBULENCE APPLICATION
c.Separate IFR/VFR aircraft landing behind a
departing aircraft on a crossing runway if the arrival
will fly through the airborne path of the departure by
the appropriate radar separation or the following
interval: (See FIG 3-10-10):
1.Heavy, large, or small behind super − 3
minutes.
2.Heavy, large, or small behind heavy − 2
minutes.
3.Small behind B757 − 2 minutes.
d.Issue wake turbulence cautionary advisories,
the position, altitude if known, and direction of flightof the super, heavy, or B757 to:
REFERENCE −
AC 90−23, Air craft Wake Turbulence, Para 11, Pilot Responsibility.
FIG 3−10−10
Intersecting Runway Separation
JO 7110.65W 12/10/15
3−10−6 Arrival Procedures and Separation1.All aircraft landing on a crossing runway
behind a departing super or heavy, or a small aircraft
landing on a crossing runway behind a departing
B757, if the arrival flight path will cross the takeoff
path behind the departing aircraft rotation point. (See
FIG 3−10−11.)
FIG 3−10−11
Intersecting Runway Separation
EXAMPLE −
“Runway niner cleared to land. Caution wake turbulence,
heavy C−One Forty One departing runway one five.”
2.All VFR aircraft landing on a crossing
runway behind an arriving super or heavy, and VFR
small aircraft landing on a crossing runway behind a
B757 , if the arrival flight path s will cross. (See
FIG 3−10−12.)FIG 3−10−12
Intersecting Runway Separation
EXAMPLE −
“Runway niner cleared to land. Caution wake turbulence,
Boeing Seven Fifty Seven landing runway three six.”
REFERENCE −
F AAO JO 7110.65, Para 7 −4−4, Approaches to Multiple Runways.
3−10−5. LANDING CLEARANCE
a.When issuing a clearance to land, first state the
runway number followed by the landing clearance. If
the landing runway is changed, controllers must
preface the landing clearance with “Change to
runway.”
PHRASEOLOGY −
RUNWAY (number) CLEARED TO LAND.
Or CHANGE TO RUNWAY (number) CLEARED TO LAND.
b.Procedures.
1.Facilities without a safety logic system or
facilities with the safety logic system inoperative orin the limited configuration must not clear an aircraft
for a full−stop, touch −and−go, stop−and−go, option,
or unrestricted low approach when a departingaircraft has been instructed to line up and wait or is
holding in position on the same runway. The landing
clearance may be issued once the aircraft in positionhas started takeoff roll.
2.Facilities using safety logic in the full core
alert runway configuration may issue a landing
JO 7110.65W 12/10/15
3−10−7 Arrival Procedures and Separationclearance, full −stop, touch −and−go, stop−and−go,
option, or unrestricted low approach to an arriving
aircraft with an aircraft holding in position or taxiing
to LUAW on the same runway except when reported
weather conditions are less than ceiling 800 feet orvisibility less than 2 miles.
c.Inform the closest aircraft that is requesting a
full−stop, touch −and−go, stop−and−go, option, or
unrestricted low approaches when there is traffic
authorized to line up and wait on the same runway.
EXAMPLE −
“Delta One, Runway One −Eight, continue, traffic holding
in position.”
“Delta One, Runway One −Eight, cleared to land. Traffic
holding in position.”“Twin Cessna Four Four Golf, Runway One-Niner base
approved, traffic holding in position.”
“Baron Two Five Foxtrot, Runway One-Niner Right extend
downwind, tower will call your base, traffic holding in
position.”
d.USA/USN/USAF. Issue runway identifier
along with surface wind when clearing an aircraft toland, touch and go, stop and go, low approach, or the
option.
PHRASEOLOGY −
RUNWAY (number), WIND (surface wind direction andvelocity), CLEARED TO LAND.
NOTE−
A clearance to land means that appropriate separation onthe landing runway will be ensured. A landing clearance
does not relieve the pilot from compliance with any
previously issued restriction.
e.Whenever a runway length has been temporar-
ily or permanently shortened, state the word
“shortened” immediately following the runwaynumber as part of the landing clearance. This
information must be issued in conjunction with the
landing clearance.
1.The addition of “shortened” must be included
in the landing clearance for the duration of the
construction project when the runway is temporarily
shortened.
2.The addition of “shortened” must be included
in the landing clearance until the Chart Supplement
U.S. is updated to include the change(s) when the
runway is permanently shortened.
PHRASEOLOGY −
RUNWAY (number) SHORTENED, CLEARED TO LAND.EXAMPLE −
“Runway Two-Seven shortened, cleared to land.”
f.If landing clearance is temporarily withheld,
insert the word “shortened” immediately after the
runway number to advise the pilot to continue.
PHRASEOLOGY −
RUNWAY (number) SHORTENED, CONTINUE.
EXAMPLE −
“Runway TwoSeven shortened, continue.”
REFERENCE −
FAAO JO 7210.3, Para 10311, Airport ConstructionFAAO JO 7210.3, Para 10312, Change in Runway Length Due to
Construction
3−10−6. ANTICIPATING SEPARATION
a.Landing clearance to succeeding aircraft in a
landing sequence need not be withheld if you observe
the positions of the aircraft and determine that
prescribed runway separation will exist when theaircraft crosses the landing threshold. Issue traffic
information to the succeeding aircraft if a preceding
arrival has not been previously reported and whentraffic will be departing prior to their arrival.
EXAMPLE −
“American T wo Forty−Five, Runway One −Eight, cleared
to land, number two following a United Seven −Thirty−
Seven two mile final. Traffic will depart prior to your
arrival.”
“American T wo Forty−Five, Runway One −Eight, cleared
to land. Traffic will depart prior to your arrival.”
NOTE−
Landing sequence number is optional at tower facilitieswhere the arrival sequence to the runway is established by
the approach control.
b.Anticipating separation must not be applied
when conducting LUAW operations, except as
authorized in paragraph 3 −10−5b2. Issue applicable
traffic information when using this provision.
EXAMPLE −
“American T wo Forty−Five, Runway One −Eight, cleared
to land. Traffic will be a Boeing Seven −Fifty−Seven
holding in position.”
REFERENCE −
P/CG Term − Clear of the Runway.
3−10−7. LANDING CLEARANCE WITHOUT
VISUAL OBSERVATION
When an arriving aircraft reports at a position where
he/she should be seen but has not been visually
observed, advise the aircraft as a part of the landing5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−10−8 Arrival Procedures and Separationclearance that it is not in sight and restate the landing
runway.
PHRASEOLOGY −
NOT IN SIGHT, RUNWAY (number) CLEARED TOLAND.
NOTE−
Aircraft observance on the CTRD satisfies the visuallyobserved requirement.
3−10−8. WITHHOLDING LANDING
CLEARANCE
Do not withhold a landing clearance indefinitely even
though it appears a violation of Title 14 of the Codeof Federal Regulations has been committed. The
apparent violation might be the result of an
emergency situation. In any event, assist the pilot tothe extent possible.
3−10−9. RUNWAY EXITING
a.Instruct aircraft where to turn-off the runway
after landing, when appropriate, and advise theaircraft to hold short of a runway or taxiway if
required for traffic.
PHRASEOLOGY −
TURN LEFT/RIGHT (taxiway/runway),
or
IF ABLE, TURN LEFT/RIGHT (taxiway/runway)
and if requiredHOLD SHORT OF (runway).
NOTE−
Runway exiting or taxi instructions should not normally be
issued to an aircraft prior to, or immediately after,touchdown.
b.Taxi instructions must be provided to the
aircraft by the local controller when:
1.Compliance with ATC instructions will be
required before the aircraft can change to groundcontrol, or
2.The aircraft will be required to enter an active
runway in order to taxi clear of the landing runway.
EXAMPLE −
“U.S. Air Ten Forty Two, turn right next taxiway, cross
runway two one, contact ground point seven.”“U.S. Air Ten Forty Two, turn right on Alfa/next taxiway,
cross Bravo, hold short of Charlie, contact ground pointseven.”
NOTE−
1.An aircraft is expected to taxi clear of the runway unless
otherwise dir ected by ATC. Pilots must not exit the landing
runway on to an intersecting runway unless authorized by
ATC. In the absence of ATC instructions, an air craft should
taxi clear of the landing runway by clearing the holdposition marking associated with the landing runway even
if that r equires the aircraft to protrude into or enter another
taxiway/ramp area. This does not authorize an aircraft tocross a subsequent taxiway or ramp after clearing the
landing runway.
REFERENCE −
P/CG Term − Clear of the Runway.
2.The pilot is responsible for ascertaining when the
aircraft is clear of the runway by clearing the runwayholding position marking associated with the landing
runway.
c.Ground control and local control must protect a
taxiway/runway/ramp intersection if an aircraft isrequired to enter that intersection to clear the landing
runway.
REFERENCE −
FAAO JO 7210.3, Para 10 −1−7, Use of Active Runways.
d.Request a read back of runway hold short
instructions when not received from the pilot.
EXAMPLE −
“American Four Ninety −two, turn left at T axiway Charlie,
hold short of Runway 27 Right.”
or
“American Four Ninety −two, turn left at Charlie, hold
short of Runway 27 Right.”
“American Four Ninety Two, Roger.”
“American Four Ninety −two, read back hold
instructions.”
NOTE−
Read back hold instructions phraseology may be initiated
for any point on a movement area when the controller
believes the read back is necessary.
3−10−10. ALTITUDE RESTRICTED LOW
APPROACH
A low approach with an altitude restriction of not less
than 500 feet above the airport may be authorized
except over an aircraft in takeoff position or a
departure aircraft. Do not clear aircraft for restricted3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−10−9 Arrival Procedures and Separationaltitude low approaches over personnel unless airport
authorities have advised these personnel that the
approaches will be conducted. Advise the approach-
ing aircraft of the location of applicable ground
traffic, personnel, or equipment.
NOTE−
1.The 500 feet r estriction is a minimum. Higher altitudes
should be used when warranted. For example, 1,000 feet is
more appropriate for super or heavy aircraft operatingover unprotected personnel or small aircraft on or near the
runway.
2.This authorization includes altitude restricted low
approaches over preceding landing or taxiing aircraft.
Restricted low appr oaches are not authorized over air craft
in takeoff position or departing aircraft.
PHRASEOLOGY −
CLEARED LOW APPROACH AT OR ABOVE (altitude).TRAFFIC (description and location).
REFERENCE −
F AAO JO 7110.65, Para 3 −1−5, Vehicles/Equipment/Personnel on
Runways.
F AAO JO 7110.65, Para 3 −1−6, Traffic Information.
F AAO JO 7110.65, Para 3 −2−1, Light Signals.
F AAO JO 7110.65, Para 3 −3−3, Timely Information.
F AAO JO 7110.65, Para 3 −9−4, Line Up and Wait (LUAW).
F AAO JO 7110.65, Para 3 −10−3, Same Runway Separation.
3−10−11. CLOSED TRAFFIC
Approve/disapprove pilot requests to remain in
closed traffic for successi ve operations subject to
local traffic conditions.
PHRASEOLOGY −
LEFT/RIGHT (if required) CLOSED TRAFFICAPPROVED. REPORT (position if required),
or
UNABLE CLOSED TRAFFIC, (additional information as
required).
NOTE−
Segregated traffic patterns for helicopters to runways andother areas may be established by letter of agreement orother local operating procedures.
REFERENCE −
F AAO JO 7110.65, Para 3 −7−4, Runway Proximity.
F AAO JO 7110.65, Para 3 −9−4, Line Up and Wait (LUAW).
F AAO JO 7110.65, Para 3 −10−3, Same Runway Separation.
3−10−12. OVERHEAD MANEUVER
Issue the following to arriving aircraft that will
conduct an overhead maneuver:a.Pattern altitude and direction of traffic. Omit
either or both if standard or when you know the pilot
is familiar with a nonstandard procedure.
PHRASEOLOGY −
P ATTERN ALTITUDE (altitude). RIGHT TURNS.
b.Request for report on initial approach.
PHRASEOLOGY −
REPORT INITIAL.
c.“Break” information and request for pilot
report. Specify the point of “break” only if
nonstandard. Request the pilot to report “break” if
required for traffic or other reasons.
PHRASEOLOGY −
BREAK AT (specified point).
REPORT BREAK.
d.Overhead maneuver patterns are developed at
airports where aircraft have an operational need to
conduct the maneuver. An aircraft conducting an
overhead maneuver is VFR and the IFR flight plan is
cancelled when the aircraft reaches the “initial point”
on the initial approach portion of the maneuver. The
existence of a standard overhead maneuver pattern
does not eliminate the possible requirement for anaircraft to conform to conventional rectangular
patterns if an overhead maneuver cannot be
approved.
NOTE−
Aircraft operating to an airport without a functioningcontrol tower must initiate cancellation of the IFR flightplan prior to executing the overhead maneuver or after
landing.
FIG 3−10−13
Overhead Maneuver
5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−10−10 Arrival Procedures and SeparationEXAMPLE −
“Air Force Three Six Eight, Runway Six, wind zero sevenzero at eight, pattern altitude six thousand, r eport initial.”
“Air Force Three Six Eight, break at midfield, report
break.”
“Air Force Three Six Eight, cleared to land.”
“Alfa Kilo Two Two, Runway Three One, wind three three
zero at one four, right turns, report initial.”
“Alfa Kilo Two Two, report break.”
“Alfa Kilo Two Two, cleared to land.”
e.Timely and positive controller action is required
to prevent a conflict when an overhead pattern could
extend into the path of a departing or a missed
approach aircraft. Local procedures and/or coordina-
tion requirements should be set forth in an
appropriate letter of agreement, facility directive,
base flying manual etc., when the frequency ofoccurrence warrants.
3−10−13. SIMULATED FLAMEOUT (SFO)
APPROACHES/EMERGENCY LANDINGPATTERN (ELP) OPERATIONS/PRACTICEPRECAUTIONARY APPROACHES
a.Authorize military aircraft to make SFO/ELP/
practice precautionary approaches if the following
conditions are met:
1.A letter of agreement or local operating
procedure is in effect between the military flying
organization and affected ATC facility.
(a)Include specific coordination, execution,
and approval procedures for the operation.
(b)The exchange or issuance of traffic
information as agreed to in any interfacility letter of
agreement is accomplished.
(c)Include a statement in the procedure that
clarifies at which points SFOs/ELPs may/may not be
terminated. (See FIG 3−10−14 and FIG 3−10−16.)
2.Traffic information regarding aircraft in radio
communication with or visible to tower controllerswhich are operating within or adjacent to the
flameout maneuvering area is provided to the
SFO/ELP aircraft and other concerned aircraft.3.The high-key altitude or practice precaution-
ary approach maneuvering altitudes of the aircraft
concerned are obtained prior to approving the
approach. (See FIG 3−10−14
and FIG 3−10−16.)
NOTE−
1.Practice precautionary/SFO/ELP approaches are
authorized only for specific aircraft. Any aircraft, however,
might make precautionary approaches, when engine
failure is considered possible. The practice precautionary
approach maneuvering area/altitudes may not conform tothe standard SFO/ELP maneuvering area/altitudes.
2.SFO/ELP approaches generally require high descent
rates. Visibility ahead and beneath the aircraft is greatly
restricted.
3.Pattern adjustments for aircraft conducting SFOs and
ELPs may impact the effectiveness of SFO and ELP
training.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−12, Low Approach and Touch-and-Go.
FAAO JO 7610.4, Para 9 −3−7, Simulated Flameout (SFO)/Emergency
Landing Pattern (ELP) Operations.
b.For overhead SFO/ELP approaches:
1.Request a report at the entry point.
PHRASEOLOGY −
REPORT (high or low) KEY (as appropriate).
2.Request a report at low key.
PHRASEOLOGY −
REPORT LOW KEY.
3.At low key, issue low approach clearance or
alternate instructions.
REFERENCE −
F AAO JO 7110.65, Para 3 −8−1, Sequence/Spacing Application.
F AAO JO 7110.65, Para 10 −1−7, Inflight Emergencies Involving
Military Fighter-type Aircraft.
FAAO JO 7610.4, Para 9 −3−7, Simulated Flameout (SFO)/Emergency
Landing Pattern (ELP) Operations .
c.For straight −in simulation flameout
approaches:
1.Request a position report from aircraft
conducting straight −in SFO approaches.
PHRASEOLOGY −
REPORT (distance) MILE SIMULATED FLAMEOUTFINAL.
2.At the appropriate position on final (normally
no closer than 3 miles), issue low approach clearance
or alternate instruction. (See FIG 3−10−15.)3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−10−11 Arrival Procedures and SeparationFIG 3−10−14
Simulated Flameout [1]
5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
3−10−12 Arrival Procedures and SeparationFIG 3−10−15
Simulated Flameout [2]
FIG 3−10−16
Emergency Landing Pattern
3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
3−11−1 Helicopter OperationsSection 11. Helicopter Operations
3−11−1. TAXI AND GROUND MOVEMENT
OPERATION
a.When necessary for a wheeled helicopter to taxi
on the surface, use the phraseology in para 3 −7−2,
Taxi and Ground Movement Operations.
NOTE−
Ground taxiing uses less fuel than hover-taxiing andminimizes air turbulence. However, under certainconditions, such as rough, soft, or uneven terrain, it maybecome necessary to hover/air-taxi for safety considera-
tions. Helicopters with articulating rotors (usually designs
with three or more main rotor blades) are subject to“ground r esonance” and may, on rare occasions, suddenly
lift off the ground to avoid severe damage or destruction.
b.When requested or necessary for a helicopter/
VTOL aircraft to proceed at a slow speed above the
surface, normally below 20 knots and in groundeffect, use the following phraseology, supplemented
as appropriate with the phraseology in para 3 −7−2,
Taxi and Ground Movement Operations.
PHRASEOLOGY −
HOVER-TAXI (supplemented, as appropriate, frompara 3−7−2, Taxi and Ground Movement Operations.)
CAUTION (dust, blowing snow, loose debris, taxiing light
aircraft, personnel, etc.).
NOTE−
Hover-taxiing consumes fuel at a high burn rate, and
helicopter downwash turbulence (produced in ground
effect) increases significantly with larger and heavierhelicopters.
REFERENCE −
P/CG Term − Hover T axi.
AIM, Para 4 −3−17, VFR Helicopter Operations at Controlled Airports.
c.When requested or necessary for a helicopter to
proceed expeditiously from one point to another,
normally below 100 feet AGL and at airspeeds above
20 knots, use the following phraseology, supplemen-ted as appropriate with the phraseology in
para 3−7−2, Taxi and Ground Movement Operations.
PHRASEOLOGY −
AIR-TAXI:
VIA (direct, as requested, or specified route)
TO (location, heliport, helipad, operating/movement area,
active/inactive runway).AVOID (aircraft/vehicles/personnel).
If required,
REMAIN AT OR BELOW (altitude).
CAUTION (wake turbulence or other reasons above).
LAND AND CONTACT TOWER,
or
HOLD FOR (reason − takeoff clearance, release,
landing/taxiing aircraft, etc.).
NOTE−
Air-taxi is the preferred method for helicopter movementson airports provided gr ound operations/conditions permit.
Air-taxi authorizes the pilot to proceed above the surfaceeither via hover-taxi or flight at speeds more than 20 knots.
Unless otherwise requested or instructed, the pilot is
expected to r emain below 100 feet AGL. The pilot is solely
responsible for selecting a safe airspeed for thealtitude/operation being conducted.
REFERENCE −
P/CG Term − Air T axi.
AIM, Para 4 −3−17, VFR Helicopter Operations at Controlled Airports.
WAKE TURBULENCE APPLICATION
d.Avoid clearances which require small aircraft or
helicopters to taxi in close proximity to taxiing or
hover-taxi helicopters.
REFERENCE −
AC 90−23, Air craft Wake Turbulence, Para 10 and Para 11.
3−11−2. HELICOPTER TAKEOFF
CLEARANCE
a.Issue takeoff clearances from movement areas
other than active runways or in diverse directions
from active runways, with additional instructions asnecessary. Whenever possible, issue takeoff clear-
ance in lieu of extended hover −taxi or air −taxi
operations.
PHRASEOLOGY −
(Present position, taxiway, helipad, numbers) MAKERIGHT/LEFT TURN FOR (direction, points of compass,heading, NAVAID radial) DEP ARTURE/DEP ARTUREROUTE (number, name, or code), AVOID (aircraft/
vehicles/personnel),
or
JO 7110.65W 12/10/15
3−11−2 Helicopter OperationsREMAIN (direction) OF (active runways, parking areas,
passenger terminals, etc.).
CAUTION (power lines, unlighted obstructions, trees,
wake turbulence, etc.).
CLEARED FOR TAKEOFF .
b.If takeoff is requested from non −movement
areas, an area not authorized for helicopter use, or an
area off the airport, and, in your judgment, the
operation appears to be reasonable, use the following
phraseology instead of the takeoff clearance insubpara a.
PHRASEOLOGY −
DEP ARTURE FROM (requested location) WILL BE ATYOUR OWN RISK (additional instructions, as necessary).
USE CAUTION (if applicable).
c.Unless agreed to by the pilot, do not issue
downwind takeoffs if the tailwind exceeds 5 knots.
NOTE−
A pilot request to takeoff from a given point in a given
direction constitutes agreement.
3−11−3. HELICOPTER DEPARTURE
SEPARATION
Separate a departing helicopter from other heli-
copters by ensuring that it does not takeoff until one
of the following conditions exists:
NOTE−
Helicopters performing air-taxiing operations within the
boundary of the airport are considered to be taxiing
aircraft.
a.A preceding, departing helicopter has left the
takeoff area. (See FIG 3 −11−1.)FIG 3−11−1
Helicopter Departure Separation
b.A preceding, arriving helicopter has taxied off
the landing area. (See FIG 3 −11−2.)
FIG 3−11−2
Helicopter Departure Separation
JO 7110.65W 12/10/15
3−11−3 Helicopter Operations3−11−4. HELICOPTER ARRIVAL
SEPARATION
Separate an arriving helicopter from other helicopters
by ensuring that it does not land until one of the
following conditions exists:
a.A preceding, arriving helicopter has come to a
stop or taxied off the landing area.
(See FIG 3 −11−3 and FIG 3 −11−4.)
FIG 3−11−3
Helicopter Arrival Separation
FIG 3−11−4
Helicopter Arrival Separation
b.A preceding, departing helicopter has left the
landing area. (See FIG 3 −11−5.)FIG 3−11−5
Helicopter Arrival Separation
3−11−5. SIMULTANEOUS LANDINGS OR
TAKEOFFS
Authorize helicopters to conduct simultaneous
landings or takeoffs if the distance between thelanding or takeoff points is at least 200 feet and the
courses to be flown do not conflict. Refer to surface
markings to determine the 200 foot minimum, orinstruct a helicopter to remain at least 200 feet from
another helicopter. (See FIG 3 −11−6.)
FIG 3−11−6
Simultaneous Helicopter Landings or Takeoffs
JO 7110.65W 12/10/15
3−11−4 Helicopter Operations3−11−6. HELICOPTER LANDING
CLEARANCE
a.Issue landing clearances to helicopters going to
movement areas other than active runways or from
diverse directions to points on active runways, withadditional instructions as necessary. Whenever
possible, issue a landing clearance in lieu of extended
hover−taxi or air −taxi operations.
PHRASEOLOGY −
MAKE APPROACH STRAIGHT −IN/CIRCLING LEFT/
RIGHT TURN TO (location, runway, taxiway, helipad,
Maltese cross) ARRIVAL/ARRIVAL ROUTE (number,name, or code).
HOLD SHORT OF (active runway, extended runway
centerline, other).
REMAIN (direction/distance; e.g., 700 feet, 1 1/2 miles)
OF/FROM (runway, runway centerline, other helicopter/aircraft).CAUTION (power lines, unlighted obstructions, wake tur-
bulence, etc.).
CLEARED TO LAND.
b.If landing is requested to non-movement areas,
an area not authorized for helicopter use, or an area
off the airport, and, in your judgment, the operation
appears to be reasonable, use the following
phraseology instead of the landing clearance in
subpara a.
PHRASEOLOGY −
LANDING AT (requested location) WILL BE AT YOUR
OWN RISK (additional instructions, as necessary). USE
CAUTION (if applicable).
c.Unless agreed to by the pilot, do not issue
downwind landings if the tailwind exceeds 5 knots.
NOTE−
A pilot request to land at a given point from a givendirection constitutes agreement.
JO 7110.65W 12/10/15
3−12−1 Sea Lane OperationsSection 12. Sea Lane Operations
3−12−1. APPLICATION
Where sea lanes are established and controlled, apply
the provisions of this section.
3−12−2. DEPARTURE SEPARATION
Separate a departing aircraft from a preceding
departing or arriving aircraft using the same sea lane
by ensuring that it does not commence takeoff until:
a.The other aircraft has departed and crossed the
end of the sea lane or turned to avert any conflict. (SeeFIG 3−12−1). If you can determine distances by
reference to suitable landmarks, the other aircraft
need only be airborne if the following minimumdistance exists between aircraft:
1.When only Category I aircraft are involved −
1,500 feet.
2.When a Category I aircraft is preceded by a
Category II aircraft − 3,000 feet.
3.When either the succeeding or both are
Category II aircraft − 3,000 feet.
4.When either is a Category III aircraft −
6,000 feet. (See FIG 3−12−2.)
FIG 3−12−1
Sea Lane Departure Operations
FIG 3−12−2
Sea Lane Departure Operations
b.A preceding landing aircraft has taxied out of
the sea lane.
NOTE−
Due to the absence of braking capability, caution should be
exercised when instructing a float plane to hold a position
as the aircraft will continue to move because of propgenerated thrust. Therefore, clearance to line up and wait
should be followed by takeoff or other clearance as soon as
is practical.
3−12−3. ARRIVAL SEPARATION
Separate an arriving aircraft from another aircraft
using the same sea lane by ensuring that the arriving
aircraft does not cross the landing threshold until one
of the following conditions exists:
a.The other aircraft has landed and taxied out of
the sea lane. Between sunrise and sunset, if you can
determine distances by reference to suitablelandmarks and the other aircraft has landed, it need
not be clear of the sea lane if the following minimum
distance from the landing threshold exists:
JO 7110.65W 12/10/15
3−12−2 Sea Lane Operations1.When a Category I aircraft is landing behind
a Category I or II − 2,000 feet. (See FIG 3−12−3.)
FIG 3−12−3
Sea Lane Arrival Operations
2.When a Category II aircraft is landing behind
a Category I or II − 2,500 feet. (See FIG 3−12−4.)
FIG 3−12−4
Sea Lane Arrival Operations
[View 2]
b.The other aircraft has departed and crossed the
end of the sea lane or turned to avert any conflict. (See
FIG 3−12−5.) If you can determine distances by
reference to suitable landmarks and the other aircraft
is airborne, it need not have crossed the end of the sealane if the following minimum distance from the
landing threshold exists:
1.When only Category I aircraft are involved −
1,500 feet.
2.When either is a Category II aircraft −
3,000 feet.
3.When either is a Category III aircraft −
6,000 feet . (See FIG 3−12−6.)
FIG 3−12−5
Sea Lane Arrival Operations
FIG 3−12−6
Sea Lane Arrival Operations
JO 7110.65W 12/10/15
4−1−1 NA V AID Use LimitationsChapter 4. IFR
Section 1. NAVAID Use Limitations
4−1−1. ALTITUDE AND DISTANCE
LIMITATIONS
When specifying a route other than an established
airway or route, do not exceed the limitations in the
table on any portion of the route which lies within
controlled airspace. (For altitude and distancelimitations, see TBL 4 −1−1, TBL 4 −1−2, and
TBL 4−1−3) (For correct application of altitude and
distance limitations see FIG 4−1−1 and FIG 4−1−2.)
REFERENCE −
F AAO JO 7110.65, Para 4 −1−5, Fix Use.
F AAO JO 7110.65, Para 5 −6−2, Methods.
TBL 4−1−1
VOR/VORTAC/TACAN NA V AIDs
Normal Usable Altitudes and Radius Distances
Class AltitudeDistance
(miles)
T 12,000 and below 25
L Below 18,000 40
H Below 14,500 40
H 14,500 − 17,999 100
H 18,000 − FL 450 130
H Above FL 450 100
TBL 4−1−2
L/MF Radio Beacon (RBN)
Usable Radius Distances for All Altitudes
Class Power (watts)Distance
(miles)
CL Under 25 15
MH Under 50 25
H 50 − 1,999 50
HH 2,000 or more 75
TBL 4−1−3
ILS
Usable Height and Distance*
Height (feet)
above transmitterDistance
(miles from transmitter)
4,500 10 (for glideslope)
4,500 18 (for localizer)
*Use the current flight check height/altitude limitations ifdifferent from the above minima.FIG 4−1−1
Application of Altitude and Distance Limitations
[Application 1]
FIG 4−1−2
Application of Altitude and Distance Limitations
[Application 2]
4−1−2. EXCEPTIONS
Altitude and di stance limitations need not be applied
when any of the following conditions are met:
a.Routing is initiated by ATC or requested by the
pilot and radar monitoring is provided.
EXCEPTION-
GNSS equipped aircraft /G, /L, /S, and /V not on a
random impromptu route.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−1−2 NA V AID Use LimitationsNOTE−
1.Except for GNSS-equipped air craft /G, /L, /S, and /V , not
on a random impromptu route, Paragraph 5-5-1,Application, requires radar separation be provided to
RNAV aircraft operating at and below FL450 on Q routes
or random RNAV routes, excluding oceanic airspace.
2.When a clearance is issued beyond the altitude and/or
distance limitations of a NAVAID, in addition to being
responsible for maintaining separation from other air craft
and airspace, the controller is responsible for providing
aircraft with information and advice related to significant
deviations from the expected flight path.
REFERENCE −
F AAO JO 7110.65, Para 2-1-3, Procedural Preference. F AAO JO 7110.65, Para 4-4-2, Route Structure Transitions.
F AAO JO 7110.65, Para 5-1-10, Deviation Advisories.
F AAO JO 7110.65, Para 5-5-1, Application.F AAO JO 7110.65, Para 6-5-4, Minima Along Other Than Established
Airways or Routes.
AIM, Para 5-1-8c, Direct Flights AIM, Para 5-1-8d, Area Navigation (RNAV)
P/CG Term - Global Navigation Satellite System (GNSS)[ICAO].
b.Operational necessity requires and approval has
been obtained from the Frequency Management and
Flight Inspection Offices to exceed them.
c.Requested routing is via an MTR.
REFERENCE −
F AAO JO 7110.65, Para 5 −6−2, Methods.
4−1−3. CROSSING ALTITUDE
Use an altitude consistent with the limitations of the
aid when clearing an aircraft to cross or hold at a fix.
REFERENCE −
F AAO JO 7110.65, Para 5 −6−2, Methods.
4−1−4. VFR-ON-TOP
Use a route not meeting service volume limitations
only if an aircraft requests to operate “VFR-on-top”
on this route.
NOTE−
Aircraft equipped with TACAN only are expected to:
1.Define route of flight between TACAN or VORTAC
NAVAIDs in the same manner as VOR-equipped aircraft.
2.Except in Class A airspace, submit requests for
“VFR-on-top” flight where insufficient TACAN orVORTAC NAVAIDs exist to define the route.
REFERENCE −
F AAO JO 7110.65, Para 5 −6−2, Methods.4−1−5. FIX USE
Request aircraft position reports only over fixes
shown on charts used for the altitude being flown,except as follows:
NOTE−
Waypoints filed in random RNAV routes automatically
become compulsory reporting points for the flight unlessotherwise advised by ATC.
a.Unless the pilot requests otherwise, use only
those fixes shown on high altitude en route charts,
high altitude instrument approach procedures charts,and SID charts when clearing military turbojet
single-piloted aircraft.
b.Except for military single-piloted turbojet
aircraft, unpublished fixes may be used if the name of
the NA V AID and, if appropriate, the radial/course/azimuth and frequency/channel are given to the pilot.
An unpublished fix is defined as one approved and
planned for publication which is not yet depicted onthe charts or one which is used in accord with the
following:
REFERENCE −
F AAO 7130.3, Holding Pattern Criteria.
1.Unpublished fixes are formed by the en route
radial and either a DME distance from the same
NA V AID or an intersecting radial from an off-routeVOR/VORTAC/TACAN. DME must be used in lieu
of off-route radials, whenever possible.
2.Except where known signal coverage restric-
tions exist, an unpublished fix may be used for ATC
purposes if its location does not exceed NA V AID
altitude and distance limitation, and when off-route
radials are used, the angle of divergence meets the
criteria prescribed below.
NOTE−
Unpublished fixes should not negate the normal use of
published intersections. Frequent routine use of an
unpublished fix would justify establishing a fix.
REFERENCE −
F AAO JO 7110.65, Para 4 −1−1, Altitude and Distance Limitations.
3.Do not hold aircraft at unpublished fixes
below the lowest assignable altitude dictated by
terrain clearance for the appropriate holding patternairspace area (template) regardless of the MEA for
the route being flown.
4.When the unpublished fix is located on an
off-route radial and the radial providing course
guidance, it must be used consistent with the
following divergence angles:3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−1−3 NA V AID Use Limitations(a)When holding operations are involved
with respect to subparas (b) and (c) below, the angle
of divergence must be at least 45 degrees.
(b)When both NA V AIDs involved are
located within 30 NM of the unpublished fix, the
minimum divergence angle is 30 degrees.
(c)When the unpublished fix is located over
30 NM from the NA V AID generating the off-courseradial, the minimum divergence angle must increase
1 degree per NM up to 45 NM; e.g., 45 NM would
require 45 degrees.
(d)When the unpublished fix is located
beyond 45 NM from the NA V AID generating the
off-course radial, the minimum divergence angle
must increase
1/2 degree per NM; e.g., 130 NM would
require 88 degrees.c.Fixes contained in the route description of
MTRs are considered filed fixes.
d.TACAN-only aircraft (type suffix M, N, or P)
possess TACAN with DME, but no VOR or LF
navigation system capability. Assign fixes based onTACAN or VORTAC facilities only.
NOTE−
TACAN-only aircraft can never be held overhead theNAVAID, be it TACAN or VORTAC.
e.DME fixes must not be established within the
no-course signal zone of the NA V AID from whichinbound holding course information would be
derived.
REFERENCE −
F AAO JO 7110.65, Para 2 −5−3, NAVAID Fixes.
F AAO JO 7110.65, Para 5 −6−2, Methods.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−2−1 ClearancesSection 2. Clearances
4−2−1. CLEARANCE ITEMS
Issue the following clearance items, as appropriate, in
the order listed below:
a.Aircraft identification.
b.Clearance limit.
1.When the clearance limit is an airport, the
word “airport” must follow the airport name.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT.
2.When the clearance limit is a NA V AID, and
the NA V AID type is known, the type of NA V AID
must follow the NA V AID name.
PHRASEOLOGY −
CLEARED TO (NAVAID name and type).
3.When the clearance limit is an intersection or
waypoint, and the type is known, the type must follow
the intersection or waypoint name.
PHRASEOLOGY −
CLEARED TO (intersection or waypoint name and type).
c.Standard Instrument Departure (SID).
d.Route of flight including PDR/PDAR/PAR
when applied.
e.Altitude data in the order flown.
f.Mach number, if applicable.
g.USAF. When issuing a clearance to an airborne
aircraft containing an altitude assignment, do not
include more than one of the following in the same
transmission:
1.Frequency change.
2.Transponder change.
3.Heading.
4.Altimeter setting.
5.Traffic information containing an altitude.
h.Holding instructions.
i.Any special information.
j.Frequency and beacon code information.REFERENCE −
F AAO JO 7110.65, Para 4 −2−8, IFR−VFR and VFR −IFR Flights.
F AAO JO 7110.65, Para 4 −5−7, Altitude Information.
4−2−2. CLEARANCE PREFIX
a.Prefix a clearance, information, or a request for
information which will be relayed to an aircraftthrough a non −ATC facility by stating “A −T−C
clears,” “A −T−C advises,” or “A −T−C requests.”
b.Flight service stations must prefix a clearance
with the appropriate phrase: “ATC clears,” “ATC
advises,” etc.
4−2−3. DELIVERY INSTRUCTIONS
Issue specific clearance delivery instructions, if
appropriate.
4−2−4. CLEARANCE RELAY
Relay clearances verbatim.
REFERENCE −
F AAO JO 7110.65, Para 10 −4−4, Communications Failure.
4−2−5. ROUTE OR ALTITUDE
AMENDMENTS
a.Amend route of flight in a previously issued
clearance by one of the following:
1.State which portion of the route is being
amended and then state the amendment.
PHRASEOLOGY −
CHANGE (portion of route) TO READ (new portion ofroute).
2.State the amendment to the route and then
state that the rest of the route is unchanged.
PHRASEOLOGY −
(Amendment to route), REST OF ROUTE UNCHANGED.
3.Issue a clearance “direct” to a point on the
previously issued route.
PHRASEOLOGY −
CLEARED DIRECT (fix ,waypoint).
Or
CLEARED DIRECT (destination) AIRPORT.
NOTE−
Clearances authorizing “dir ect” to a point on a pr eviously
issued route do not require the phrase “rest of route
JO 7110.65W 12/10/15
4−2−2 Clearancesunchanged.” However , it must be understood where the
previously cleared route is r esumed. When necessary, “rest
of route unchanged” may be used to clarify routing.
4.Issue the entire route by stating the
amendment.
EXAMPLE −
(Cessna 21A has been cleared to the Airville Airport viaV41 Delta VOR V174 Alfa VOR, direct Airville Airport,maintain 9000. After takeoff, the aircraft is rerouted viaV41 Frank intersection, V71 Delta VOR, V174 Alfa VOR.
The controller issues one of the following as an amended
clearance):
1.“Cessna Two One Alfa change Victor Forty −One Delta
to read Victor Forty −One Frank, Victor Seventy −One
Delta.”
2.“Cessna Two One Alfa cleared via Victor Forty −One
Frank, Victor Seventy −One Delta, rest of route un-
changed.”
3.“Cessna Two One Alfa cleared via Victor Forty −One
Frank, Victor Seventy −One Delta, Victor One Seventy −
Four Alfa V−O−R, direct Airville airport, maintain Niner
Thousand.”
b.When route or altitude in a previously issued
clearance is amended, restate all applicable altitude
restrictions.
EXAMPLE −
1.(A departing aircraft is cleared to cross Ollis
intersection at or above 3,000; Gordonsville VOR at orabove 12,000; maintain FL 200. Shortly after departure the
altitude to be maintained is changed to FL 240. Because
altitude restrictions remain in effect, the controller issuesan amended clearance as follows):
“Amend altitude. Cross Ollis intersection at or above
Three Thousand; cr oss Gordonsville V −O−R at or above
One Two Thousand; maintain Flight Level Two Four
Zero.”
(Shortly after departure, altitude r estrictions are no longer
applicable, the controller issues an amended clearance as
follows):
“Climb and maintain Flight Level Two Four Zero.”
2.(An aircraft is cleared to climb via a SID with published
altitude restrictions. Shortly after departure the top
altitude is changed to FL 230 and compliance with thealtitude restrictions is still required, the controller issues
an amended clearance as follows):“Climb via SID except maintain Flight Level Two Three
Zero.”
NOTE−
1.Restating pr eviously issued altitude to “maintain” is an
amended clearance. If altitude to “maintain” is changed or
restated, whether prior to departure or while airborne and
previously issued altitude restrictions ar e omitted, altitude
restrictions are canceled, including SID/STAR altituderestrictions if any.
Crossing altitudes and speed restrictions on
Obstacle Departure Procedure/s (ODP/s) cannot be
canceled or amended by ATC.
c.Issue an amended clearance if a speed
restriction is declined because it cannot be complied
with concurrently with a previously issued altituderestriction.
EXAMPLE −
(An aircraft is cleared to cross Gordonsville VOR at
11,000. Shortly thereafter he/she is cleared to reducehis/her airspeed to 300 knots. The pilot informs the
controller he/she is unable to comply with both clearances
simultaneously. The controller issues an amendedclearance as follows):
“Cross Gordonsville VOR at One One Thousand. Then,
reduce speed to Three Zero Zero.”
NOTE−
The phrase “do the best you can” or comparable phrasesare not valid substitutes for an amended clearance withaltitude or speed restrictions.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−18, Operational Requests.
F AAO JO 7110.65, Section 6, Vectoring, Para 5 −6−2, Methods.
F AAO JO 7110.65, Section 7, Speed Adjustment, Para 5 −7−2, Methods.
d.Air traf fic control specialists should avoid route
and/or altitude changes for aircraft participating in
the North American Route Program (NRP) and that
are displaying “NRP” in the remarks section of their
flight plan. Specialists at facilities actively participat-
ing in the High Altitude Redesign (HAR) program
should avoid route and/or altitude changes for aircraft
participating in full HAR and high altitudePoint−to−point (PTP), and that are displaying
“HAR,” or “PTP” in the remarks section of their
flight plan.
NOTE−
Air traffic control specialists retain the latitude necessary
to tactically resolve conflicts. Every effort should be made
to ensure the aircraft is returned to the original filed flightplan/altitude as soon as conditions warrant.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−2−3 ClearancesREFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 2 −2−15, North American Route Program
(NRP) Information.
F AAO JO 7110.65, Para 2 −3−2, En Route Data Entries.
F AAO JO 7210.3, Chapter 17, Section 16, North American Route
Program.
4−2−6. THROUGH CLEARANCES
You may clear an aircraft through intermediate stops.
PHRASEOLOGY −
CLEARED THROUGH (airport) TO (fix).
4−2−7. ALTRV CLEARANCE
Use the phrase “via approved altitude reservation
flight plan,” if the aircraft will operate in an approved
ALTRV .
PHRASEOLOGY −
VIA APPROVED ALTITUDE RESERVATION (mission
name) FLIGHT PLAN.
NOTE−
An ALTRV normally includes the departure, climb, cruise,
and arrival phases of flight up to and including holding
pattern or point/time at which ATC provides separationbetween aircraft.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−3, Abbreviated Departure Clearance.
4−2−8. IFR−VFR AND VFR −IFR FLIGHTS
a.Clear an aircraft planning IFR operations for the
initial part of flight and VFR for the latter part to the
fix at which the IFR part ends.
b.Treat an aircraft planning VFR for the initial
part of flight and IFR for the latter part as a VFRdeparture. Issue a clearance to this aircraft when it
requests IFR clearance approaching the fix where it
proposes to start IFR operations. The phraseologyCLEARED TO (destination) AIRPORT AS FILED
may be used with abbreviated departure clearance
procedures.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−3, Abbreviated Departure Clearance.
c.When an aircraft changes from VFR to IFR, the
controller must assign a beacon code to Mode-C
equipped aircraft that will allow MSAW alarms.
d.When VFR aircraft operating below the
minimum altitude for IFR operations requests an IFR
clearance and the pilot informs you, or you are aware,that they are unable to climb in VFR conditions to the
minimum IFR altitude:
1.Before issuing a clearance, ask if the pilot is
able to maintain terrain and obstruction clearance
during a climb to the minimum IFR altitude.
PHRASEOLOGY −
(Aircraft call sign), ARE YOU ABLE TO MAINTAIN
YOUR OWN TERRAIN AND OBSTRUCTION
CLEARANCE UNTIL REACHING (appropriate
MVA/MIA/MEA/OROCA)
NOTE−
Pilots of pop −up aircraft are responsible for terrain and
obstacle clearance until reaching minimum instrument
altitude (MIA) or minimum en route altitude (MEA). Pilot
compliance with an approved F AA procedure or an ATCinstruction transfers that responsibility to the F AA;therefore, do not assign (or imply) specific course guidance
that will (or could) be in effect below the MIA or MEA.
EXAMPLE −
“November Eight Seven Six, are you able to provide your
own terrain and obstruction clearance between your
present altitude and six thousand feet?”
2.If the pilot is able to maintain their own
terrain and obstruction clearance, issue the appropri-
ate IFR clearance as prescribed in Para 4 −2−1,
Clearance Items, and Para 4 −5−6, Minimum En
Route Altitudes.
3.If the pilot states that they are unable to
maintain terrain and obstruction clearance, instruct
the pilot to maintain VFR and to state intentions.
4.If appropriate, apply the provisions of
Para 10−2−7, VFR Aircraft In Weather Dif ficulty, or
Para 10−2−9, Radar Assistance Techniques, as
necessary.
4−2−9. CLEARANCE ITEMS
The following guidelines must be utilized to facilitate
the processing of airfile aircraft:
a.Ensure the aircraft is within your area of
jurisdiction unless otherwise coordinated.
b.Obtain necessary information needed to
provide IFR service.
c.Issue clearance to destination, short range
clearance, or an instruction to the pilot to contact an
FSS if the flight plan cannot be processed. Ifclearance is to destination airport, the phraseology
CLEARED TO (destination) AIRPORT must be
used. If clearance is to a NA V AID, state the name of5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−2−4 Clearancesthe NA VAID followed by the type of NA VAID, if the
type is known. If clearance is to an intersection or
waypoint and the type is known, the type must follow
the intersection or waypoint name.
NOTE−
These procedures do not imply that the processing ofairfiles has priority over another ATC duty to beperformed.
REFERENCE −
F AAO JO 7110.65, Para 2 −2−1, Recording Information.
4−2−10. CANCELLATION OF IFR FLIGHT
PLAN
a.If necessary, before instructing an IFR aircraft
arriving at an airport not served by an air traffic
control tower or flight service station to change to the
common traffic advisory frequency, provide the pilot
with instructions on how to cancel his/her IFR flight
plan.
1.Airports with an air/ground communications
station:PHRASEOLOGY −
(Call sign) REPORT CANCELLATION OF IFR ON(frequency).
2.Airports without an air/ground communica-
tions station:
PHRASEOLOGY −
(Call sign) REPORT CANCELLATION OF IFR THIS
FREQUENCY OR WITH FLIGHT SERVICE.Or
(Call sign) REPORT CANCELLATION OF IFR THIS
FREQUENCY OR WITH (FSS serving the area or the ATC
controlling facility).
EXAMPLE −
“N13WA report cancellation of IFR this frequency or with
McAlester Radio.”
b.Respond to a pilot’s c ancellation of his/her IFR
flight plan as follows:
PHRASEOLOGY −
(Call sign) IFR CANCELLATION RECEIVED.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−3−1 Departure ProceduresSection 3. Departure Procedures
4−3−1. DEPARTURE TERMINOLOGY
Avoid using the term “takeoff” except to actually
clear an aircraft for takeoff or to cancel a takeoff
clearance. Use such terms as “depart,” “departure,” or
“fly” in clearances when necessary.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−9, Takeoff Clearance.
F AAO JO 7110.65, Para 3 −9−1 1, Cancellation of Takeoff Clearance.
4−3−2. DEPARTURE CLEARANCES
Include the following items in IFR departure
clearances:
NOTE−
When considered necessary, controllers or pilots mayinitiate read backs of a clearance. Some pilots may berequired by company rule to do so.
a.Always include the airport of departure when
issuing a departure clearance for relay to an aircraft
by an FSS, dispatcher, etc.
b.Clearance Limit.
1.Specify the destination airport when practi-
cable, even though it is outside controlled airspace.
Issue short range clearances as provided for in anyprocedures established for their use.
(a)When the clearance limit is an airport, the
word “airport” must follow the airport name.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT
(b)When the clearance limit is a NA V AID
and the NA VAID type is known, the type of NA VAID
must follow the NA V AID name.
PHRASEOLOGY −
CLEARED TO (NAVAID name and type)
(c)When the clearance limit is an intersection
or waypoint and the type is known, the type mustfollow the intersection or waypoint name.
PHRASEOLOGY −
CLEARED TO (intersection or waypoint name and type)
2.For Air Force One (AF1) operations, do not
specify the destination airport.
NOTE−
Presidential detail is r esponsible for ensuring the accuracy
of the destination airport.PHRASEOLOGY −
DESTINATION AS FILED.
c.Departure Procedures.
1.Specify direction of takeoff/turn or initial
heading/azimuth to be flown after takeoff as follows:
(a)Locations with Airport Traffic Control
Service− Specify these items as necessary.
(b)Locations without Airport T raffic Control
Service, but within a Class E surface area − specify
these items if necessary. Obtain/solicit the pilot’s
concurrence concerning these items before issuing
them in a clearance.
NOTE−
Direction of takeoff and turn after takeoff can beobtained/solicited dir ectly from the pilot, or relayed by an
FSS, dispatcher, etc., as obtained/solicited from the pilot.
(c)At all other airports −Do not specify
direction of takeoff/turn after tak eoff. If necessary to
specify an initial heading/azimuth to be flown aftertakeoff, issue the initial heading/azimuth so as to
apply only within controlled airspace.
2.Where an obstacle departure procedure
(ODP) has been published for a location and pilot
compliance is necessary to ensure separation, include
the procedure as part of the ATC clearance.
EXAMPLE −
“Depart via the (airport name)(runway number) departure
procedure.”
Or
“Depart via the (graphic ODP name) obstacle departure
procedure.”
NOTE−
Some aircraft are required by 14 CFR 91.175 to depart a
runway under IFR using the ODP absent other instructions
from ATC.
NOTE−
IFR takeoff minimums and obstacle departure procedures
are prescribed for specific airports/runways and published
in either a textual, or graphic form with the label
(OBSTACLE) in the pr ocedure title, and documented on an
appropriate F AA Form 8260. To alert pilots of their
existence, instrument approach procedure charts are
annotated with a symbol:
5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−3−2 Departure Procedures3.Do not solicit use of the Visual Climb over
Airport (VCOA) option.
NOTE−
Pilots will specifically advise ATC of their intent to use the
VCOA option.
4.Compatibility with a procedure issued may
be verified by asking the pilot if items obtained/
solicited will allow him/her to comply with local
traffic pattern, terrain, or obstruction avoidance.
PHRASEOLOGY −
FLY RUNWAY HEADING.
DEP ART (direction or runway).
TURN LEFT/RIGHT.
WHEN ENTERING CONTROLLED AIRSP ACE
(instruction), FLY HEADING (degrees) UNTILREACHING (altitude, point, or fix) BEFORE
PROCEEDING ON COURSE.
FLY A (degree) BEARING/AZIMUTH FROM/TO (fix)
UNTIL (time),
or
UNTIL REACHING (fix or altitude),and if required,
BEFORE PROCEEDING ON COURSE.
EXAMPLE −
“Verify right turn after departure will allow compliance
with local traffic pattern,”or “Verify this clearance willallow compliance with terrain or obstruction avoidance.”
NOTE−
If a published IFR departure procedure is not included in
an ATC clearance, compliance with such a pr ocedure is the
pilot’ s prerogative.
5.SIDs:
(a)Assign a SID (including transition if
necessary). Assign a PDR or the route filed by the
pilot, only when a SID is not established for the
departure route to be flown, or the pilot has indicated
that he/she does not wish to use a SID.
NOTE−
Departure procedure descriptive text contained within
parentheses (for example, “Jimmy One (RNAV)
Departure”) is not included in departure clearancephraseology.PHRASEOLOGY −
(SID name and number) DEP ARTURE.
(SID name and number) DEP ARTURE,
(transition name) TRANSITION.
EXAMPLE −
“Stroudsburg One Departure.”
“Stroudsburg One Departure, Sparta Transition.”
NOTE−
If a pilot does not wish to use a SID issued in an ATCclearance, or any other SID published for that location,he/she is expected to advise ATC.
(b)If it is necessary to assign a crossing
altitude which differs from the SID altitude
emphasize the change to the pilot.
PHRASEOLOGY −
(SID name and number) DEP ARTURE, EXCEPT CROSS(revised altitude information).
EXAMPLE −
“Stroudsburg One Departure, except cross Quaker atfive thousand.
“Astoria T wo Departure, except cross Astor waypoint at six
thousand.
(c)Specify altitudes when they are not
included in the SID.
PHRASEOLOGY −
(SID name and number) DEP ARTURE. CROSS (fix) AT(altitude).
EXAMPLE −
“Stroudsburg One Departure. Cross Jersey intersection at
four thousand. Cross Range intersection at six thousand.”
depart
“Engle Two departure. Cross Pilim waypoint at or above
five thousand. Cross Engle waypoint at or above seventhousand. Cross Gorge waypoint at niner thousand.”
d.Route of flight. Specify one or more of the
following:
1.Airway, route, course, heading, azimuth, arc,
or vector.
2.The routing a pilot can expect if any part of
the route beyond a short range clearance limit differs
from that filed.
PHRASEOLOGY −
EXPECT FURTHER CLEARANCE VIA (airways, routes,or fixes.)3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−3−3 Departure Procedurese.Altitude. Use one of the following in the order
of preference listed. Altitude may be omitted if the
top altitude is published in the SID route description.
NOTE−
Turbojet aircraft equipped with afterburner engines may
occasionally be expected to use afterburning during theirclimb to the en route altitude. When so advised by the pilot,
the controller may be able to plan his/her traffic toaccommodate the high performance climb and allow the
pilot to climb to his/her planned altitude without
restriction.
REFERENCE −
PCG, Climb Via, Top Altitude
1.To the maximum extent possible, Air Force
One will be cleared unrestricted climb to:
(a)9,000’ AGL or higher.
(b)If unable 9,000’ AGL or higher, then the
highest available altitude below 9,000’ AGL.
2.Assign the altitude requested by the pilot.
3.Assign an altitude, as near as possible to the
altitude requested by the pilot, and
(a)Inform the pilot when to expect clearance
to the requested altitude unless instructions are
contained in the specified SID, or
(b)If the requested altitude is not expected to
be available, inform the pilot what altitude can beexpected and when/where to expect it.
NOTE−
1.14 CFR Section 91.185, says that in the event of a
two-way radio communication failure, in VFR conditionsor if VFR conditions are encountered after the failure, thepilot must continue the flight under VFR and land as soon
as practicable. That section also says that when the failure
occurs in IFR conditions the pilot must continue flight atthe highest of the following altitudes or flight levels for theroute segment being flown:
a.The altitude or flight level assigned in the last ATC
clearance received.
b.The minimum altitude (converted, if appropriate, to
minimum flight level as prescribed in 14 CFR Sec-tion 91.121(c)) for IFR operations. (This altitude should be
consistent with MEAs, MOCAs, etc.)
c.The altitude or flight level ATC has advised may be
expected in a further clearance.
2.If the expected altitude is the highest of the preceding
choices, the pilot should begin to climb to that expected
altitude at the time or fix specified in the clearance. The
choice to climb to the expected altitude is not applicable ifthe pilot has proceeded beyond the specified fix or if the
time designated in the clearance has expired.
PHRASEOLOGY −
CLIMB AND MAINTAIN (the altitude as near as possible
to the pilot’ s requested altitude). EXPECT (the requestedaltitude or an altitude different from the r equested altitude)
AT (time or fix),
and if applicable,
(pilot’ s requested altitude) IS NOT AVAILABLE.
EXAMPLE −
1.A pilot has requested flight level 350. Flight level 230
is immediately available and flight level 350 will be
available at the Appleton zero five zero radial 35 mile fix.The clearance will read:
“Climb and maintain flight level two three zero. Expect
flight level three five zero at Appleton zero five zero radial
three five mile fix.”
2.A pilot has requested 9,000 feet. An altitude restriction
is required because of facility pr ocedures or requirements.
Assign the altitude and advise the pilot at what fix/time the
pilot may expect the requested altitude. The clearance
could read:
“Climb and maintain five thousand. Expect ninerthousand one zero minutes after departure.”
3.A pilot has requested 17,000 feet which is unavailable.
You plan 15,000 feet to be the pilot’ s highest altitude prior
to descent to the pilot’ s destination but only 13,000 feet isavailable until San Jose VOR. Advise the pilot of the
expected altitude change and at what fix/time to expect
clearance to 15,000 feet. The clearance will read: “Climb
and maintain one thr ee thousand. Expect one five thousand
at San Jose. One seven thousand is not available.”
REFERENCE −
F AAO JO 7110.65, Para 4 −3−3, Abbreviated Departure Clearance.
F AAO JO 7110.65, Para 5 −8−2, Initial Heading.
4.Use one of the following when the SID
contains published crossing restrictions:
(a)When the top altitude is included in the
SID route description, instruct aircraft to “climb via
SID.”
(b)When a top altitude is not published on a
SID that contains published crossing restrictions, or
when it is necessary to issue an interim altitudeinstruct the aircraft to “Climb via SID except (altitude
assignment/ change)”.
EXAMPLE −
“Cleared to Johnston Air port, Scott One departure, Jonez
transition, Q-One Forty-five. Climb via SID.”
“Cleared to Johnston Airport, Scott One departure,5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−3−4 Departure ProceduresJonez transition, Q-One Forty-five, Climb via SID
except maintain flight level one eight zero.”
“Cleared to Johnston Airport, Scott One departure,
Jonez transition, Q-One Forty-five, Climb Via SIDexcept maintain flight level one eight zero, expectflight level three five zero one zero minutes after
departure.”
NOTE−
Considering the principle that the last A TC clearance
issued has precedence over the previous, the
phraseology ’maintain (altitude)’ alone cancelspreviously issued altitude restrictions, includingSID/STAR altitude restrictions, unless they arerestated or modified.
REFERENCE −
F AA JO7110.65 Para 4-2-5 Route or Altitude Amendments
AIM 4-4-10 Adherence to Clearance
4−3−3. ABBREVIATED DEPARTURE
CLEARANCE
a.Issue an abbreviated departure clearance if its
use reduces verbiage and the following conditions are
met:
REFERENCE −
F AAO JO 7110.65, Para 4 −2−8, IFR-VFR and VFR-IFR Flights.
1.The route of flight filed with ATC has not
been changed by the pilot, company, operations
officer, input operator, or in the stored flight plan
program prior to departure.
NOTE−
A pilot will not accept an abbreviated clearance if the r oute
of flight filed with ATC has been changed by him/her or the
company or the operations officer before departure.He/she is expected to inform the control facility on initialradio contact if he/she cannot accept the clearance. It is the
responsibility of the company or operations officer toinform the pilot when they make a change.
2.All ATC facilities concerned have sufficient
route of flight information to exercise their control
responsibilities.
NOTE−
The route of flight information to be provided may becovered in letters of agreement.
3.When the flight will depart IFR, destination
airport information is relayed between the facilitiesconcerned prior to departure.
EXAMPLE −
1.A tower or flight service station relay of destination
airport information to the center when requestingclearance:
“Request clearance for United Four Sixty-One to
O’Hare.”
2.A center r elay to the tower or flight service station when
initiating a clearance:
“Clearance for United Four Sixty-One to O’Hare.”
NOTE−
Pilots are expected to furnish the facility concerned withdestination airport information on initial radio call-up.This will provide the information necessary for detectingany destination airport differences on facility relay.
4.The assigned altitude, according to the
provisions in para 4 −3−2, Departure Clearances,
subparagraph e, is stated in the cl earance. Where a top
altitude is published in the SID route description it
may be omitted.
b.If it is necessary to modify a filed route of flight
in order to achieve computer acceptance due, forexample, to incorrect fix or airway identification, the
contraction “FRC,” meaning “Full Route Clearance
Necessary,” or “FRC/(fix),” will be added to theremarks. “FRC” or “FRC/(fix)” must always be the
first item of intra-center remarks. When “FRC” or
“FRC/(fix)” appears on a flight progress strip, thecontroller issuing the ATC clearance to the aircraft
must issue a full route clearance to the specified fix,
or, if no fix is specified, for the entire route.
EXAMPLE −
“Cleared to Missoula International Airport, Chief TwoDeparture to Angl ey; direct Salina; then as filed; maintain
one seven thousand.”
NOTE−
Changes, such as those made to conform with traffic flows
and preferred routings, are only permitted to be made bythe pilot (or his/her operations office) or the controller
responsible for initiating the clearance to the aircraft.
c.Specify the destination airport in the clearance.
d.When no changes are required in the filed route,
state the phrase: “Cleared to (destination) airport,
([SID name and number] and SID transition, as
appropriate); then, as filed.” If a SID is not assigned,
follow with “As filed.”
1.Specify the assigned altitude. The altitude
may be omitted and pilots instructed to “climb viaSID” when a top altitude is published in the SID route
description.
2.When the SID has published altitude
restrictions but the top altitude is not published or
must be changed, state the phrase “climb via SID3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−3−5 Departure Proceduresexcept maintain” to assign the top altitude. If
required, add any additional instructions or
information, including final requested altitude if
different than assigned except if Pre −Departure
Clearance (PDC) is utilized.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT;
and as appropriate,
(SID name and number) DEP ARTURE,
THEN AS FILED.
MAINTAIN (altitude); (additional instructions or
information).
Or as appropriate,
CLIMB VIA SID.
CLIMB VIA SID except maintain (altitude); (additional
instructions or information).
If a SID is not assigned,
CLEARED TO (destination) AIRPORT AS FILED.
MAINTAIN (altitude);
and if required,(additional instructions or information).
EXAMPLE −
“Cleared to Reynolds Airport; David Two Departure,Kingham Transition; then, as filed. Maintain niner
thousand. Expect flight level four one zero, one zero
minutes after departure.”
“Cleared to Reynolds Airport; David Two Departure,
Kingham Transition; then, as filed. Climb via SID.”
“Cleared to Reynolds Airport; David Two Departure,
Kingham Transition; then, as filed. Climb via SID exceptmaintain flight level two four zero. Expect flight level four
one zero, one zero minutes after departure.
“Cleared to Reynolds Airport as filed. Maintain niner
thousand. Expect flight level four one zero
, one zero
minutes after departure.”
NOTE−
1.SIDs are excluded from “cleared as filed” procedures.2.If a pilot does not wish to accept an ATC clearance to
fly a SID, he/she is expected to advise ATC or state“NO SID” in his/her flight plan remarks.
REFERENCE −
PCG, Climb Via, Top Altitude
e.When a filed route will require revisions, the
controller responsible for initiating the clearance tothe aircraft must either:
1.Issue a FRC/FRC until a fix; or
2.If it reduces verbiage, state the phrase:
“Cleared to (destination) airport, or cleared NA V AID,
intersection, or waypoint (type if known), (SID name
and number and SID transition, as appropriate), then
as filed, except ...” Specify the necessary revision.
3.Specify the assigned altitude. The altitude
may be omitted and pilots instructed to “climb via
SID” when a top altitude is published in the SID route
description.
4.When the SID has published altitude
restrictions but the top altitude is not published or
must be changed state the phrase “climb via SIDexcept maintain” and the assign the top altitude. If
required, add any additional instructions or informa-
tion.
5.If a SID is not assigned, state: “Cleared to
(destination) airport or cleared to NA V AID,
intersection, or waypoint (type if known) as filed,
except ...” Specify the necessary revision, the
assigned altitude; and if required, add any additional
instructions or information.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT.
Or
CLEARED TO (NAVAID name and type).
Or
CLEARED TO (intersection or waypoint name and
type).
and as appropriate,
(SID name and number) DEP ARTURE,
(transition name) TRANSITION; THEN,
AS FILED, EXCEPT CHANGE ROUTE TO READ5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−3−6 Departure Procedures(amended route portion).
MAINTAIN (altitude);
Or as appropriate,
CLIMB VIA SID CLIMB VIA SID except maintain (altitude); (additional
instructions or information);
and if required,(additional instructions or information).
If a SID is not assigned,
CLEARED TO (destination) AIRPORT AS FILED,
EXCEPT CHANGE ROUTE TO READ (amended route
portion).
MAINTAIN (altitude);
and if required,
(additional instructions or information).
EXAMPLE −
“Cleared to Reynolds Airport; South Boston One
Departure; then, as filed, except change route to readSouth Boston Victor Twenty Greensboro. Maintaineight thousand, report leaving four thousand.”
“Cleared to Reynolds Airport; South Boston One
Departure; then, as filed, except change route to r ead South
Boston Victor Twenty Greensboro; climb via SID.”
“Cleared to Reynolds Airport; South Boston One
Departure; then, as filed, except change route to r ead South
Boston Victor Twenty Greensboro; climb via SID exceptmaintain flight level one eight zero, expect flight level three
one zero one zero minutes after departure.”
“Cleared to Reynolds Airport as filed, except change r oute
to read South Boston Victor Twenty Gr eensboro. Maintain
eight thousand, report leaving four thousand.”
“Cleared to Reynolds Airport via Victor Ninety-one
Albany, then as filed. Maintain six thousand.”
f.In a nonradar environment specify one, two, or
more fixes, as necessary, to identify the initial route
of flight.1.Specify the destination airport, when practic-
able, followed by the word “airport” even though it is
outside controlled airspace.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT
2.When the clearance limit is a NA V AID, the
type of NA V AID must follow the NA V AID name.
PHRASEOLOGY −
CLEARED TO (NAVAID name and type)
3.When the clearance limit is an intersection or
waypoint and the type is known, the type must follow
the intersection or waypoint name.
PHRASEOLOGY −
CLEARED TO (intersection or waypoint name and type)
EXAMPLE −
The filed route of flight is from Hutchins V10 Emporia,thence V10N and V77 to St. Joseph. The clearance will
read:
“Cleared to W atson Airport as filed via Emporia, maintain
Seven Thousand.”
g.Do not apply these procedures when a pilot
requests a detailed clearance or to military operations
conducted within ALTRV , stereo routes, operations
above FL 600, and other military operations requiring
special handling.
NOTE−
Departure clearance procedures and phraseology formilitary operations within approved altitude r eservations,
military operations above FL 600, and other military
operations requiring special handling are contained in
separate procedures in this order or in a LOA, asappropriate.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−7, ALTRV Clearance.
F AAO JO 7110.65, Para 9 −2−14, Military Operations Above FL 600.
4−3−4. DEPARTURE RESTRICTIONS,
CLEARANCE VOID TIMES, HOLD FORRELEASE, AND RELEASE TIMES
Assign departure restrictions, clearance void times,
hold for release, or release times when necessary to
separate departures from other traffic or to restrict or
regulate the departure flow.
REFERENCE −
F AAO JO 7110.65, Para 10 −3−1, Overdue Aircraft.
F AAO JO 7110.65, Para 10 −4−1, Traffic Restrictions.
F AAO JO 7110.65, Para 10 −4−3, Traffic Resumption.
a.Clearance V oid Times.
1.When issuing clearance void times at airports
not served by control towers, provide alternative3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−3−7 Departure Proceduresinstructions requiring the pilots to advise ATC of their
intentions no later than 30 minutes after the clearance
void time if not airborne.
2.The facility delivering a clearance void time
to a pilot must issue a time check.
PHRASEOLOGY −
CLEARANCE VOID IF NOT OFF BY (clearance voidtime),
and if required,
IF NOT OFF BY (clearance void time), ADVISE (facility)
NOT LATER THAN (time) OF INTENTIONS.
TIME (time in hours, minutes, and the nearest quarter
minute).
b.Hold For Release (HFR).
1.“Hold for release” instructions must be used
when necessary to inform a pilot or a controller that
a departure clearance is not valid until additionalinstructions are received.
REFERENCE −
P/CG Term − Hold for Release.
2.When issuing hold for release instructions,
include departure delay information.
PHRASEOLOGY −
(Aircraft identification) CLEARED TO (destination)AIRPORT AS FILED, MAINTAIN (altitude),
and if required,
(additional instructions or information).
HOLD FOR RELEASE, EXPECT (time in hours and/or
minutes) DEP ARTURE DELAY.
3.When conditions allow, release the aircraft as
soon as possible.
PHRASEOLOGY −
To another controller, (aircraft identification) RELEASED.
To a flight service specialist,
ADVISE (aircraft identification) RELEASED FOR
DEP ARTURE.
To a pilot at an airport not served by a control tower,
(aircraft identification) RELEASED FOR DEP ARTURE.c.Release Times.
1.Release times must be issued to pilots when
necessary to specify the earliest time an aircraft may
depart.
NOTE−
A release time is a departure restriction issued to a pilot(either directly or through authorized relay) to separate adeparting aircraft from other traffic.
2.The facility issuing a release time to a pilot
must include a time check.
PHRASEOLOGY −
(Aircraft identification) RELEASED FOR DEP ARTUREAT (time in hours and/or minutes),
and if required,
IF NOT OFF BY (time), ADVISE (facility) NOT LATER
THAN (time) OF INTENTIONS. TIME (time in hours, minutes, and nearest quarter minute).
d.When expect departure clearance times
(EDCT) are assigned through traffic management
programs, excluding overriding call for release
(CFR) operations as described in subparagraph e, the
departure terminal must, to the extent possible, planground movement of aircraft destined to the affected
airport(s) so that flights are sequenced to depart no
earlier than 5 minutes before, and no later than 5minutes after the EDCT. Do not release aircraft on
their assigned EDCT if a ground stop (GS) applicable
to that aircraft is in effect, unless approval has beenreceived from the originator of the GS.
e.Call for Release (CFR). When CFR is in effect,
release aircraft so they are airborne within a window
that extends from 2 minutes prior and ends 1 minute
after the assigned time, unless otherwise coordinated.
NOTE−
1.Subparagraph (e) applies to all facilities.
2.Coordination may be verbal, electronic, or written.
1.If an aircraft has begun to taxi or requests taxi
in a manner consistent with meeting the EDCT, the
aircraft must be released. Additional coordination is
not required.
2.If an aircraft requests taxi or clearance for
departure inconsistent with meeting the EDCT
window, ask the pilot to verify the EDCT.
(a)If the pilot’s EDCT is the same as the FAA
EDCT, the aircraft is released consistent with the
EDCT.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−3−8 Departure Procedures(b)If the pilot’s EDCT is not the same as the
FAA EDCT, refer to Trust and Verify Note below.
3.If an aircraft requests taxi too late to meet the
EDCT, contact the ATCSCC through the appropriate
TMU.
NOTE−
(Trust & Verify) EDCTs are revised by Air Carriers and
Traffic Management for changing conditions en route or at
affected airport(s). Terminal controllers’ use of aircraftreported EDCT for departure sequencing should beverified with the appr opriate TMU prior to departure if this
can be accomplished without the aircraft incurring delay
beyond the EDCT reported by the aircraft. The preferred
method for verification is the Flight Schedule Monitor(FSM). If the EDCT cannot be verified without incurringadditional delay, the aircraft should be released based onthe pilot reported EDCT. The aircraft operator is
responsible for operating in a manner consistent to meet
the EDCT.
4−3−5. GROUND STOP
Do not release an aircraft if a ground stop (GS)
applicable to that aircraft is in effect, without theapproval of the originator of the GS.
4−3−6. DELAY SEQUENCING
When aircraft elect to take delay on the ground before
departure, issue departure clearances to them in the
order in which the requests for clearance were
originally made if practicable.
4−3−7. FORWARD DEPARTURE DELAY
INFORMATION
Inform approach control facilities and/or towers of
anticipated departure delays.
4−3−8. COORDINATION WITH RECEIVING
FACILITY
a.Coordinate with the receiving facility before the
departure of an aircraft if the departure point is less
than 15 minutes flying time from the transferringfacility’s boundary unless an automatic transfer of
data between automated systems will occur, in which
case, the flying time requirement may be reduced to5 minutes or replaced with a mileage from the
boundary parameter when mutually agreeable to both
facilities.NOTE−
Agreements requiring additional time are encouragedbetween facilities that need earlier coordination. However,
when agreements establish mandatory radar handoff
procedures, coordination needs only be effected in a timely
manner prior to transfer of control.
REFERENCE −
F AAO JO 7110.65, Chapter 5, Section 4, Transfer of RadarIdentification, Para 5 −4−1, Application.
b.The actual departure time or a subsequent strip
posting time must be forwarded to the receiving
facility unless assumed departure times are agreed
upon and that time is within 3 minutes of the actualdeparture time.
4−3−9. VFR RELEASE OF IFR DEPARTURE
When an aircraft which has filed an IFR flight plan
requests a VFR departure through a terminal facility,
FSS, or air/ground communications station:
a.After obtaining, if necessary, approval from the
facility/sector responsible for issuing the IFR
clearance, you may authorize an IFR flight plannedaircraft to depart VFR. Inform the pilot of the proper
frequency and, if appropriate, where or when to
contact the facility responsible for issuing the
clearance.
PHRASEOLOGY −
VFR DEP ARTURE AUTHORIZED. CONTACT (facility)ON (frequency) AT (location or time if required) FOR
CLEARANCE.
b.If the facility/sector responsible for issuing the
clearance is unable to issue a clearance, inform thepilot, and suggest that the delay be taken on the
ground. If the pilot insists upon taking off VFR and
obtaining an IFR clearance in the air, inform thefacility/sector holding the flight plan of the pilot’s
intentions and, if possible, the VFR departure time.
4−3−10. FORWARDING DEPARTURE TIMES
TERMINAL
Unless alternate procedures are prescribed in a letter
of agreement or automatic departure messages are
being transmitted between automated facilities,
forward departure times to the facility from whichyou received the clearance and also to the terminal
departure controller when that position is involved in
the departure sequence.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−3−9 Departure ProceduresNOTE−
1.Letters of agreement prescribing assumed departure
times or mandatory radar handoff procedures arealternatives for providing equivalent procedures.
2.The letters “DM” flashing in the data block signify
unsuccessful transmission of a departure message.REFERENCE −
F AAO JO 7210.3, Para 11 −2−6, Automatic Acquisition/T ermination
Areas.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−4−1 Route AssignmentSection 4. Route Assignment
4−4−1. ROUTE USE
Clear aircraft via routes consistent with the altitude
stratum in which the operation is to be conducted by
one or more of the following:
NOTE−
Except for certain NAVAIDs/routes used by scheduled air
carriers or authorized for specific uses in the control of IFR
aircraft, Air Traffic Service (ATS) routes, and NAVAIDsestablished for use at specified altitudes are shown onU.S. government charts or DOD FLIP charts.
REFERENCE −
F AAO JO 7110.65, Para 2 −5−2, NAVAID Terms.
F AAO JO 7110.65, Para 4 −1−2, Exceptions.
F AAO JO 7110.65, Para 4 −5−6, Minimum En Route Altitudes.
F AAO JO 7110.65, Para 5 −6−1, Application.
a.Designated ATS routes.
PHRASEOLOGY −
VIA:
VICTOR (color) (airway number)(the word Romeo when
RNAV for existing Alaska routes),
or
J (route number) (the word Romeo when RNAV for existing
Alaska routes),
or
Q (route number)
orTango (route number)
or
SUBSTITUTE (ATS route) FROM (fix) to (fix),
or
IR (route number).
CROSS/JOIN VICTOR/(color) (airway number), (number
of miles) MILES (direction) OF (fix).
b.Radials, courses, azimuths to or from
NA V AIDs.PHRASEOLOGY −
VIA;
(name of NAVAID) (specified) RADIAL/COURSE/
AZIMUTH,
or
(fix) AND (fix),
or
RADIALS OF (ATS route) AND (ATS route).
c.Random routes.
1.When not being radar monitored,
GNSS-equipped RNA V aircraft on random RNA Vroutes must be cleared via or reported to be
established on a point-to-point route.
(a)The points must be published NA V AIDs,
waypoints, fixes or airports recallable from theaircraft’s navigation database. The points must be
displayed on controller video maps or depicted on the
controller chart displayed at the control position.When applying nonradar separation the maximum
distance between points must not exceed 500 miles.
(b)Protect 4 miles either side of the route
centerline.
(c)Assigned altitudes must be at or above the
highest MIA along the projected route segment being
flown, including the protected airspace of that route
segment.
2.Impromptu
PHRASEOLOGY −
DIRECT (name of NAVAID/waypoint/fix/airport)
NOTE−
A random impr omptu r outing is a direct course initiated by
ATC or requested by the pilot during flight. Aircraft arecleared from their present position to a NAV AID, waypoint,
fix, or airport.
3.Point-to-Point
PHRASEOLOGY −
After (fix) proceed direct (fix)
NOTE−
A point-to-point route segmen t begins and ends with a
published NAVAID, waypoint, fix, or airport.
d.DME arcs of NA V AIDS.
JO 7110.65W 12/10/15
4−4−2 Route Assignmente.Radials, courses, azimuths, and headings of
departure or arrival routes.
f.SIDs/STARs.
g.Vectors.
h.Fixes defined in terms of degree-distance from
NA V AIDs for special military operations.
i.Courses, azimuths, bearings, quadrants, or
radials within a radius of a NA V AID.
PHRASEOLOGY −
CLEARED TO FLY (general direction from NAVAID) OF(NAVAID name and type) BETWEEN (specified)COURSES TO/BEARINGS FROM/RADIALS (NAVAIDname when a NDB) WITHIN (number of miles) MILE
RADIUS,
or
CLEARED TO FLY (specified) QUADRANT OF (NAVAID
name and type) WITHIN (number of miles) MILE RADIUS.
EXAMPLE −
1.“Cleared to fly east of Allentown VORTAC between the
zero four five and the one three five radials within four zero
mile radius.”
2.“Cleared to fly east of Crystal Lake radio beacon
between the two two five and the three one five courses toCrystal Lake within three zero mile radius.”
3.“Cleared to fly northeast quadrant of Philipsburg
VORTAC within four zero mile radius.”
j.Fixes/waypoints defined in terms of:
1.Published name; or
2.Degree-distance from NA V AIDs; or
3.Latitude/longitude coordinates, state the
latitude and longitude in degrees and minutes
including the direction from the axis such as North or
West; or
PHRASEOLOGY −
“32 DEGREES, 45 MINUTES NORTH,
105 DEGREES, 37 MINUTES WEST.”
4.Offset from published or established ATS
route at a specified distance and direction for random
(impromptu) RNA V Routes.
PHRASEOLOGY −
DIRECT (fix/waypoint)DIRECT TO THE (facility) (radial) (distance) FIX.
OFFSET(distance) RIGHT/LEFT OF (route).
EXAMPLE −
“Direct SUNOL.”
“Direct to the Appleton three one zero radial two five mile
fix.”“Offset eight miles right of Victor six.”
REFERENCE −
F AAO JO 7110.65, Para 2-3-8 Aircraft Equipment Suffix.
F AAO JO 7110.65, Para 2-5-3 NAVAID FixesF AAO JO 7110.65, Para 4-1-2, Exceptions
F AAO JO 7110.65, Para 5-5-1, Application
F AAO JO 7110.65, Para 6-5-4, Minima Along Other Than EstablishedAirways or Routes.
P/CG Term - Global Navigation Satellite System (GNSS)[ICAO].
4−4−2. ROUTE STRUCTURE TRANSITIONS
To effect transition within or between route
structures, clear an aircraft by one or more of the
following methods, based on NA V AIDs or RNA V:
a.Vector aircraft to or from radials, courses, or
azimuths of the ATS route assigned.
b.Assign a SID/STAR.
c.Clear departing or arriving aircraft to climb or
descend via radials, courses, or azimuths of the ATSroute assigned.
d.Clear departing or arriving aircraft directly to or
between the NA V AIDs forming the ATS routeassigned.
e.Clear aircraft to climb or descend via the ATS
route on which flight will be conducted.
f.Clear aircraft to climb or descend on specified
radials, courses, or azimuths of NA V AIDs.
g.Clear RNA V aircraft between designated or
established ATS routes via random RNA V routes to
a NA VAID, waypoint, airport or fix on the new route.
h.Provide radar monitoring to RNA V equipped
aircraft transitioning via random RNA V routes.
EXCEPTION. GNSS equipped aircraft /G, /L, /S,
and /V not on a random impromptu route.
REFERENCE −
F AAO JO 7110.65, Para 4-1-2, Exceptions.
F AAO JO 7110.65, Para 4-4-1, Route Use.F AAO JO 7110.65, Para 5-5-1, Application.
P/CG Term − Global Navigation Satellite System (GNSS)[ICAO].
JO 7110.65W 12/10/15
4−4−3 Route Assignment4−4−3. DEGREE-DISTANCE ROUTE
DEFINITION FOR MILITARY OPERATIONS
EN ROUTE
a.Do not accept a military flight plan whose route
or route segments do not coincide with designated
airways or jet routes or with a direct course between
NA V AIDs unless it is authorized in subpara b andmeets the following degree-distance route definition
and procedural requirements:
1.The route or route segments must be defined
in the flight plan by degree-distance fixes composed
of:
(a)A location identifier;
(b)Azimuth in degrees magnetic; and
(c)Distance in miles from the NA VAID used.
EXAMPLE −
“MKE 030025.”
2.The NA V AIDs selected to define the
degree-distance fixes must be those authorized foruse at the altitude being flown and at a distance within
the published service volume area.
3.The distance between the fixes used to define
the route must not exceed:
(a)Below FL 180 − 80 miles;
(b)FL 180 and above − 260 miles; and
(c)For celestial navigation routes, all
altitudes− 260 miles.
4.Degree-distance fixes used to define a route
must be considered compulsory reporting pointsexcept that an aircraft may be authorized by ATC to
omit reports when traffic conditions permit.
5.Military aircraft using degree-distance route
definition procedures must conduct operations in
accordance with the following:
(a)Unless prior coordination has been
effected with the appropriate air traffic controlfacility, flight plan the departure and the arrival
phases to conform with the routine flow of traffic
when operating within 75 miles of the departure andthe arrival airport. Use defined routes or airways or
direct courses between NA V AIDs or as otherwise
required to conform to the normal flow of traffic.
(b)Flight plans must be filed at least 2 hours
before the estimated time of departure.b.The following special military operations are
authorized to define routes, or portions of routes, by
degree-distance fixes:
1.Airborne radar navigation, radar bomb
scoring (RBS), and airborne missile programmingconducted by the USAF, USN, and RAF.
2.Celestial navigation conducted by the USAF,
USN, and RAF.
3.Target aircraft operating in conjunction with
air defense interceptors, and air defense interceptorswhile en route to and from assigned airspace.
4.Missions conducted above FL 450.
5.USN fighter and attack aircraft operating in
positive control airspace.
6.USN/USMC aircraft, TACAN equipped,
operating within the Honolulu FIR/Hawaiian airways
area.
7.USAF/USN/USMC aircraft flight planned to
operate on MTRs.
8.USAF Air Mobility Command (AMC)
aircraft operating on approved station-keepingequipment (SKE) routes in accordance with the
conditions and limitations listed in FAA Exemption
No. 4371 to 14 CFR Section 91.177(a)(2) and14 CFR Section 91.179(b)(1).
4−4−4. ALTERNATIVE ROUTES
When any part of an airway or route is unusable
because of NA V AID status, clear aircraft that are not
RNA V capable via one of the following alternativeroutes:
a.A route depicted on current U.S. Government
charts/publications. Use the word “substitute”immediately preceding the alternative route in
issuing the clearance.
b.A route defined by specifying NA VAID radials,
courses, or azimuths.
c.A route defined as direct to or between
NA V AIDs.
d.Vectors.
NOTE−
Inform area navigation aircraft that will proceed to theNAVAID location of the NAVAID outage.
4−4−5. CLASS G AIRSPACE
Include routes through Class G airspace only when
requested by the pilot.
JO 7110.65W 12/10/15
4−4−4 Route AssignmentNOTE−
1.Flight plans filed for r andom RNAV routes through
Class G airspace are considered a request by the pilot.
2.Flight plans containing MTR segments in/through
Class G airspace are considered a request by the pilot.
4−4−6. DIRECT CLEARANCES
a.Unless operational necessity dictates, do not
issue a routing clearance that will take an aircraft off
of its flight plan route if:
1.The aircraft is part of a known traffic
management initiative.
2.The part of the route under consideration for
the direct routing is within a protected segment. If a
flight routing within a protected segment is amended,
coordination must be accomplished as follows:(a)ATCS: with TMU.
(b)Terminal facility TMU: with overlying
ARTCC TMU.
(c)ARTCC TMU (for amendments outside
their facility): with ATCSCC.
b.EN ROUTE . Do not issue revised routing
clearances that will take an aircraft off its flight plan
route past the last fix in your facility’s airspace, unless
requested by the pilot or operational necessitydictates.
NOTE−
Nothing in this paragraph m ust preclude a controller from
issuing a routing clearance that conforms to a letter ofagreement or standard operating procedure within their
own facility or between facilities, is required to maintain
separation or comply with traffic flow managementinitiatives.
JO 7110.65W 12/10/15
4−5−1 Altitude Assignment and VerificationSection 5. Altitude Assignment and Verification
4−5−1. VERTICAL SEPARATION MINIMA
Separate instrument flight rules (IFR) aircraft using
the following minima between altitudes:
a.Up to and including FL 410 − 1,000 feet.
b.Apply 2,000 feet at or above FL 290 between
non−RVSM aircraft and all other aircraft at or above
FL 290.
c.Above FL 410 − 2,000 feet, except:
1.In oceanic airspace, above FL 450 between a
supersonic and any other aircraft − 4,000 feet.
2.Above FL 600 between military aircraft −
5,000 feet.
NOTE−
Oceanic separation procedures are supplemented in
Chapter 8; Section 7, Section 8, Section 9 , and Section 10.
REFERENCE −
F AAO JO 7110.65, Para 5 −5−5, Vertical Application.
F AAO JO 7110.65, Para 6 −6−1, Application.
F AAO JO 7110.65, Para 9 −2−14, Military Operations Above FL 600.
4−5−2. FLIGHT DIRECTION
Clear aircraft at altitudes according to the
TBL 4−5−1.
TBL 4−5−1
Altitude Assignment
Aircraft
OperatingOn course
degrees
magneticAssign Examples
Below 3,000
feet above
surfaceAny course Any altitude
At and below
FL 4100 through 179 Odd cardinalaltitude or
flight levels atintervals of
2,000 feet3,000, 5,000,FL 310,
FL 330
180 through 359 Even cardinal
altitude or
flight levels atintervals of
2,000 feet4,000, 6,000,FL 320,
FL 340Aircraft
OperatingOn course
degrees
magneticAssign Examples
Above FL 410 0 through 179 Odd cardinal
flight levels at
intervals of4,000 feet
beginning with
FL 450FL 450,
FL 490,
FL 530
180 through 359 Odd cardinal
flight levels at
intervals of4,000 feet
beginning with
FL 430FL 430,
FL 470,
FL 510
One way
routes (except
in compositesystems)Any course Any cardinal
altitude or
flight levelbelow FL 410
or any odd
cardinal flight
level above
FL 410FL 270,
FL 280,
FL 290,FL 300,
FL 310,
FL 410,
FL 430,
FL 450
Within an
ALTRVAny course Any altitude orflight level
In transitionto/from or
within Oceanicairspace where
composite
separation is
authorizedAny course Any odd oreven cardinal
flight levelincluding those
above FL 290FL 280,FL 290,
FL 300,FL 310,
FL 320,
FL 330,
FL 340
In aerialrefueling
tracks andanchorsAny course Altitude blocks
as requested.
Any altitude orflight level050B080,
FL 180B220,
FL 280B310
REFERENCE −
F AAO JO 7110.65, Para 4 −5−3, Exceptions.
F AAO JO 7110.65, Para 7 −7−5, Altitude Assignments.
F AAO JO 7110.65, Para 9 −3−2, Separation Minima.
4−5−3. EXCEPTIONS
When traffic, meteorological conditions, or aircraft
operational limitations prevent assignment ofaltitudes prescribed in para 4 −5−2, Flight Direction,
assign any cardinal altitude or flight level below
FL 410 or any odd cardinal flight level at or aboveFL 410 without regard to direction of flight as
follows:
NOTE−
See para 2 −3−10, Control Symbology, for control
abbreviations and symbols to be used in conjunction with
this paragraph.
a.For traffic conditions, take this action only if
one of the following conditions exists:
JO 7110.65W 12/10/15
4−5−2 Altitude Assignment and Verification1.Aircraft remain within a facility’s area and
prior approval is obtained from other affected
positions or sectors or the operations are covered in
a Facility Directive.
2.Aircraft will proceed beyond the facility’s
area and specific operations and procedurespermitting random altitude assignment are covered in
a letter of agreement between the appropriate
facilities.
b.Military aircraft are operating on random routes
and prior approval is obtained from the facility
concerned.
c.For meteorological conditions, take this action
only if you obtain prior approval from other affected
positions or sectors within your facility and, if
necessary, from the adjacent facility concerned.
d.For aircraft operational limitations, take this
action only if the pilot informs you the available
appropriate altitude exceeds the operational limita-tions of his/her aircraft and only after you obtain prior
approval from other affected positions or sectors
within your facility and, if necessary, from theadjacent facility concerned.
e.For mission requirements, take this action only
when the aircraft is operating on an MTR.
REFERENCE −
F AAO JO 7110.65, Para 7 −7−5, Altitude Assignments.
F AAO JO 7110.65, Para 9 −3−2, Separation Minima.
4−5−4. LOWEST USABLE FLIGHT LEVEL
If a change in atmospheric pressure affects a usable
flight level in your area of jurisdiction, use
TBL 4−5−2 to determine the lowest usable flight
level to clear aircraft at or above 18,000 feet MSL.
TBL 4−5−2
Lowest Usable FL
Altimeter Setting Lowest Usable FL
29.92” or higher 180
29.91” to 28.92” 190
28.91” to 27.92” 200
REFERENCE −
F AAO JO 7110.65, Para 9 −3−2, Separation Minima.4−5−5. ADJUSTED MINIMUM FLIGHT
LEVEL
When the prescribed minimum altitude for IFR
operations is at or above 18,000 feet MSL and the
atmospheric pressure is less than 29.92”, add theappropriate adjustment factor from TBL 4 −5−3 to the
flight level equivalent of the minimum altitude in feet
to determine the adjusted minimum flight level.
TBL 4−5−3
Minimum FL Adjustment
Altimeter Setting Adjustment Factor
29.92” or higher None
29.91” to 29.42” 500 feet
29.41” to 28.92” 1,000 feet
28.91” to 28.42” 1,500 feet
28.41” to 27.92” 2,000 feet
4−5−6. MINIMUM EN ROUTE ALTITUDES
Except as provided in subparas a and b below, assign
altitudes at or above the MEA for the route segment
being flown. When a lower MEA for subsequentsegments of the route is applicable, issue the lower
MEA only after the aircraft is over or past the
Fix/NA V AID beyond which the lower MEA appliesunless a crossing restriction at or above the higher
MEA is issued.
a.An aircraft may be cleared below the MEA but
not below the MOCA for the route segment being
flown if the altitude assigned is at least 300 feet above
the floor of controlled airspace and one of the
following conditions are met:
NOTE−
Controllers must be aware that in the event of radio
communications failure, a pilot will climb to the MEA forthe route segment being flown.
1.Nonradar procedures are used only within
22 miles of a VOR, VORTAC, or TACAN.
2.Radar procedures are used only when an
operational advantage is realized and the followingactions are taken:
(a)Radar navigational guidance is provided
until the aircraft is within 22 miles of the NA V AID,and
(b)Lost communications instructions are
issued.
b.An aircraft may be cleared to operate on jet
routes below the MEA (but not below the prescribed
JO 7110.65W 12/10/15
4−5−3 Altitude Assignment and Verificationminimum altitude for IFR operations) or above the
maximum authorized altitude if, in either case, radar
service is provided.
NOTE−
Minimum en route and maximum authorized altitudes for
certain jet route segments have been established above the
floor of the jet route structure due to limitations onnavigational signal coverage.
c.Where a higher altitude is required because of an
MEA, the aircraft must be cleared to begin climb to
the higher MEA as follows:
1.If no MCA is specified, prior to or
immediately after passing the fix where the higher
MEA is designated. (See FIG 4−5−1.)
FIG 4−5−1
No MCA Specified
2.If a MCA is specified, prior to the fix so as to
cross the fix at or above the MCA. (See FIG 4 −5−2.)
FIG 4−5−2
MCA Specified
d.GNSS MEAs may be approved on published
ATS routes. Air traffic may assign GNSS MEAs to
GNSS−equipped aircraft where established.
NOTE−
On high altitude ATS routes, the GNSS MEA is FL180unless published higher.e.Where MEAs have not been established, clear
an aircraft at or above the minimum altitude for IFR
operations prescribed by 14 CFR Section 91.177.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−8, IFR-VFR and VFR-IFR Flights.
F AAO JO 7110.65, Para 4 −4−1, Route Use.
F AAO JO 7110.65, Chapter 5, Section 6, Para 5 −6−1, Application.
F AAO JO 7110.65, Para 7 −7−5, Altitude Assignments.
4−5−7. ALTITUDE INFORMATION
Issue altitude instructions as follows:
REFERENCE −
F AAO JO 7110.65, Para 4 −2−1, Clearance Items.
a.Altitude to maintain or cruise. When issuing
cruise in conjunction with an airport clearance limitand an unpublished route will be used, issue an
appropriate crossing altitude to ensure terrain
clearance until the aircraft reaches a fix, point, orroute where the altitude information is available to
the pilot. When issuing a cruise clearance to an airport
which does not have a published instrumentapproach, a cruise clearance without a crossing
restriction may be issued.
PHRASEOLOGY −
MAINTAIN/CRUISE (altitude). MAINTAIN (altitude)
UNTIL (time, fix, waypoint),
or
(number of miles or minutes) MILES/MINUTES P AST (fix,
waypoint).
CROSS (fix, point, waypoint),
or
INTERCEPT (route) AT OR ABOVE (altitude), CRUISE(altitude).
NOTE−
1.The crossing altitude must assure IFR obstruction
clearance to the point where the aircraft is established on
a segment of a published route or instrument approach
procedure.
2.When an aircraft is issued a cruise clearance to an
airport which does not have a published instrumentapproach procedure, it is not possible to satisfy therequirement for a cr ossing altitude that will ensure terrain
clearance until the aircraft reaches a fix, point, or route
where altitude information is available to the pilot. Underthose conditions, a cruise clearance without a crossing
restriction authorizes a pilot to determine the minimum
IFR altitude as prescribed in 14 CFR Section 91.177 and
JO 7110.65W 12/10/15
4−5−4 Altitude Assignment and Verificationdescend to it at pilot discr etion if it is lower than the altitude
specified in the cruise clearance.
b.Instructions to climb or descend including
restrictions, as required. Specify a time restriction
reference the UTC clock reading with a time check.If you are relaying through an authorized communic-
ations provider, such as ARINC, FSS, etc., advise the
radio operator to issue the current time to the aircraft
when the clearance is relayed. The requirement to
issue a time check must be disregarded if the
clearance is issued via Controller Pilot Data LinkCommunications (CPDLC).
EXCEPTION. If you are in direct, two-way,
VHF/UHF voice communication with the pilot andthe aircraft is in radar contact, you may specify an
elapsed time interval restriction, in full minute
increments only, without any reference to the UTCclock. The time r estriction begins once the clearance
has been acknowledged by the pilot .
EXAMPLE −
1.“United Four Seventeen, climb to reach one three
thousand at two two one five.”“Time two two one one and one −quarter.”
The pilot is expected to be level at 13,000 feet at 2215 UTC.
2.Through Relay −“Speedbird Five, climb to reach flight
level three −five zero at one −two−one−five, time” (Issue a
time check).
3.In radar contact and in direct controller to pilot,
two-way, VHF/UHF voice communication - “United Four
Seventeen, descend to reach f light level three five zero
within two minutes.” The time restriction begins once theclearance has been acknowledged by the pilot.
4.“United Four Seventeen climb to leave flight level three
three zero within two minutes, maintain flight level threefive zero.”
REFERENCE −
F AAO JO 7110.65, Para 1 −2−1, Word Meanings.
F AAO JO 7110.65, Para 2 −4−17, Numbers Usage.
PHRASEOLOGY −
CLIMB/DESCEND AND MAINTAIN (altitude).
If required,
AFTER P ASSING (fix, waypoint),
or
AT (time) (time in hours, minutes, and nearest quarter
minute).CLIMB/DESCEND TO REACH (altitude)
AT (time (issue time check) or fix, waypoint),
or
AT (time). CLIMB/DESCEND AND MAINTAIN (altitude)
WHEN ESTABLISHED AT LEAST (number of miles orminutes) MILES/MINUTES P AST (fix, waypoint) ON THE
(NAVAID) (specified) RADIAL.
CLIMB/DESCEND TO REACH (altitude) AT (time or fix,
waypoint),
or
A POINT (number of miles) MILES (direction) OF (name
of DME NAVAID),
or
MAINTAIN (altitude) UNTIL (time (issue time check), fix,
waypoint), THEN CLIMB/DESCEND AND MAINTAIN(altitude).
Through relay:
CLIMB TO REACH (altitude) AT (time) (issue a time
check).
Or
Using a time interval while in radar contact and in direct
controller to pilot, two-way, VHF/UHF voicecommunication:
CLIMB/DESCEND TO REACH/LEAVE (altitude)
WITHIN (number) MINUTES, MAINTAIN (altitude).Or
CLIMB/DESCEND TO REACH/LEAVE (altitude) IN
(number) MINUTES OR LESS, MAINTAIN (altitude).
c.Specified altitude for crossing a specified fix or
waypoint; or, specified altitude for crossing a
distance (in miles) and direction from a specified fix
or waypoint.
PHRASEOLOGY −
CROSS (fix, waypoint) AT (altitude).
CROSS (fix, waypoint) AT OR ABOVE/BELOW (altitude).
CROSS (number of miles) MILES (direction) OF (name of
fix, waypoint) AT (altitude).CROSS (number of miles) MILES (direction) OF (name of
fix, waypoint) AT OR ABOVE/BELOW (altitude).
d.A specified altitude over a specified fix for that
portion of a descent clearance where descent at pilot’s
JO 7110.65W 12/10/15
4−5−5 Altitude Assignment and Verificationdiscretion is permissible. At any other time it is
practicable, authorize climb/descent at pilot’s
discretion.
PHRASEOLOGY −
CLIMB/DESCEND AT PILOT’S DISCRETION.
EXAMPLE −
“United Four Seventeen, descend and maintain six thou-
sand.”
NOTE−
The pilot is expected to commence descent upon receipt of
the clearance and to descend at the suggested rates
specified in the AIM, para 4 −4−10, Adherence to
Clearance, until reaching the assigned altitude of6,000 feet.
EXAMPLE −
“United Four Seventeen, descend at pilot’ s discretion,maintain six thousand.”
NOTE−
The pilot is authorized to conduct descent within the
context of the term “at pilot’ s discretion” as described inthe AIM.
EXAMPLE −
“United Four Seventeen cross Lakeview V −O−R at or
above flight level two zero zero, descend and maintainsix thousand.”
NOTE−
The pilot is authorized to conduct descent “at pilot’ sdiscretion” until reaching Lakeview VOR. The pilot mustcomply with the clearance provision to cross the Lakeview
VOR at or above FL 200, and after passing Lakeview VOR,
the pilot is expected to descend at the rates specified in the
AIM until reaching the assigned altitude of 6,000 feet.
EXAMPLE −
“United Four Seventeen, cross Lakeview V −O−R at and
maintain six thousand.”
NOTE−
The pilot is authorized to conduct descent “at pilot’ s
discretion,” but must comply with the cleara nce pr ovision
to cross Lakeview VOR at 6,000 feet.
EXAMPLE −
“United Four Seventeen, descend now to flight level two
seven zero, cross Lakeview V −O−R at or below one zero
thousand, descend and maintain six thousand.”
NOTE−
The pilot is expected to promptly execute and complete
descent to FL 270 upon receipt of the clearance. Afterreaching FL 270, the pilot is authorized to descend “atpilot’ s discretion” until reaching Lakeview VOR. The pilot
must comply with the clearance provision to cross
Lakeview VOR at or below 10,000 feet. After Lakeview
VOR, the pilot is expected to descend at the rates specifiedin the AIM until reaching 6,000 feet.NOTE−
1.A descent clearance which specifies a crossing altitude
authorizes descent at pilot’ s discretion for that portion ofthe flight to which the crossing altitude restriction applies.
2.Any other time that authorization to descend at pilot’ s
discretion is intended, it must be specifically stated by thecontroller.
3.The pilot may need to know of any future restrictions
that might affect the descent, including those that may be
issued in another sector, in order to properly plan a descent
at pilot’ s discretion.
4.Controllers need to be aware that the descent rates in
the AIM are only suggested and aircraft will not alwaysdescend at those rates.
REFERENCE −
P/CG Term − Pilot’ s Discretion.
e.When a portion of a climb/descent may be
authorized at the pilot’s discretion, specify the
altitude the aircraft must climb/descend to followedby the altitude to maintain at the pilot’s discretion.
PHRASEOLOGY −
CLIMB/DESCEND NOW TO (altitude), THEN
CLIMB/DESCEND AT PILOT’S DISCRETIONMAINTAIN (altitude).
EXAMPLE −
“United Three Ten, descend now to flight level two eight
zero, then descend at pilot’ s discr etion maintain flight level
two four zero.”
NOTE−
1.The pilot is expected to commence descent upon r eceipt
of the clearance and to descend as prescribed in the AIM,para 4−4−10, Adher ence to Clearance, until FL 280. At
that point, the pilot is authorized to continue descent toFL 240 within context of the term “at pilot’ s discr etion” as
described in the AIM.
2.Controllers need to be aware that the descent rates are
only suggested and aircraft will not always descend at
those rates.
f.When the “pilot’s discretion” portion of a
climb/descent clearance is being canceled by
assigning a new altitude, inform the pilot that the new
altitude is an “amended altitude.”
EXAMPLE −
“American Eighty Three, amend altitude, descend andmaintain Flight Level two six zero.”
NOTE−
American Eighty Three, at FL 280, has been cleared todescend at pilot’ s discretion to FL 240. Subsequently, thealtitude assignment is changed to FL 260. Ther efore, pilot’ s
discretion is no longer authorized.
g.Altitude assignments involving more than one
altitude.
JO 7110.65W 12/10/15
4−5−6 Altitude Assignment and VerificationPHRASEOLOGY −
MAINTAIN BLOCK (altitude) THROUGH (altitude).
h.Instructions to vertically navigate on a
STAR/SID with published restrictions.
PHRASEOLOGY −
DESCEND VIA (STAR name and number).
TERMINAL: DESCEND VIA (STAR name and number and
runway number).
CLIMB VIA (SID name and number).
EXAMPLE −
“Descend via the Eagul Five arrival.”
“Cross Gramm at or above flight level one eight zero, thendescend via the Riivr Two arrival.”
TERMINAL: “Descend via the Lendy One Arrival,
Runway 22 left.”
“Climb via the Dawgs Four Departure.”
NOTE−
When cleared for STARs that contain published speed
restrictions, the pilot must comply with those speedrestrictions independent of any descend via clearance. Clearance to “descend via” authorizes pilots:1. To descend at pilot discretion to meet published
restrictions and laterally navigate on a STAR. Pilots
navigating on a STAR must maintain the last assignedaltitude until receiving clearance to descend via. Oncedeparting an altitude the pilot may not return to thataltitude without an ATC clearance.
2. When cleared to a waypoint depicted on a STAR, to
descend from a previously assigned altitude at pilot’ sdiscretion to the altitude depicted for that waypoint.
ATC
assigned altitudes must ensure obstacle clearance.
3. Once established on the depicted arrival, to descend and
to meet all published or assigned altitude and/or speed
restrictions. Where speed r estrictions are published at the
waypoint/fix pilots will begin slowing to comply with therestrictions prior to reaching the waypoint/fix.
NOTE−
When cleared for SIDs that contain published speed
restrictions, the pilot must comply with those speedrestrictions independent of any “climb via” clearance.Clearance to “climb via” authorizes pilots:1. When used in the IFR departure clearance, in a PDC,
DCL or when subsequently cleared after departure to a
waypoint depicted on a SID, to join a procedure afterdeparture or resume a procedure. 2. When vertical navigation is interrupted and an altitude
is assigned to maintain which is not contained on the
published procedure, to clim b from that previously-as-
signed altitude at pilot’ s discretion to the altitude depicted
for the next waypoint. A TC must ensur e obstacle clearanceuntil the aircraft is established on the lateral and vertical
path of the SID.3. Once established on the depicted departure, to climb and
to meet all published or assigned altitude and speed
restrictions.
REFERENCE −
F AAO JO 7110.65, Para 4-4-2, Route Structure Transitions
F AAO JO 7110.65, Para 4-5-6, Minimum En Route AltitudesF AAO JO 7110.65, Para 5-5-9, Separation From Obstructions
PCG, Climb Via, Descend Via.
NOTE−
Pilots cleared for vertical navigation using the phraseo-logy “descend via” or “climb via” must inform ATC, upon
initial contact, of the altitude leaving, the runwaytransition or landing direction if assigned (STARs), and
any assigned restrictions not published on the procedure.
EXAMPLE −
“Delta One T wenty One leaving flight level one niner zero,
descending via the Eagul Five arrival runway two-six
transition.”
“Delta One Twenty One leaving flight level one niner zero
for one two thousand, descending via the Eagul Five
arrival, runway two-six transition.”
“JetBlue six zero two leavin g flight level two one zero
descending via the Ivane Two arrival landing south.”
“Cactus Seven Eleven leaving two thousand climbing via
the Laura Two departure.”
“Cactus Seven Eleven leaving two thousand for one-six
thousand, climbing via the Laura Two departure.”
REFERENCE −
AIM, Para 5-2-8, Instrument Departur e Procedur es (DP) − Obstacle
Departure Procedures (ODP) and Standard Instrument Departures
(SID)PCG, Top Altitude, Bottom Altitude
AIM, Para 5-4-1, Standard Terminal Arrival (STAR) Procedures.
1.Assign an altitude to cross the waypoint/fix,
if no altitude is depicted at the waypoint/fix, for
aircraft on a direct routing to a STAR or SIDwaypoint/fix.
EXAMPLE −
1. “Proceed direct Denis, cross Denis at or above flight
level two zero zero, then descend via the Mmell Onearrival.”
NOTE−
In Example 1 the aircraft will maintain FL200 or higher
until reaching Denis. The pilot will then comply with theMmell One arrival lateral path and published speedrestrictions and will descend at pilot discretion to comply
with published altitude r estrictions. The aircraft may begin
slowing prior to Denis to comply with any published speed
restrictions at that waypoint.
JO 7110.65W 12/10/15
4−5−7 Altitude Assignment and VerificationEXAMPLE −
2. “Proceed direct Rockr, cro ss Rockr at or above one-zero
thousand, climb via the Bizee Two departure.”
NOTE−
In Example 2 the aircraft will join the Bizee Two departureat Rockr and will then comply with departure publishedlateral path, published speed and altitude restrictions.
2.A “descend via” clearance must not be used
where procedures contain only published “expect”
altitude and/or speed restrictions.
NOTE−
Pilots are not expected to comply with published “expect”
restrictions in the event of lost communications, unlessATC has specifically advised the pilot to expect theserestrictions as part of a further clearance.
3.“Descend via” may be used on procedures
that contain both “expect” and required altitude and
speed restrictions only if altitude and/or speed
restrictions or alternate restrictions are issued for the
fix/waypoint associated with all expect restrictions.
4.“Descend via” clearances may also be issued
if an aircraft is past all fixes/waypoints that haveexpect restrictions.
5.If it is necessary to assign a crossing altitude
which differs from the STAR or SID altitude,
emphasize the change to the pilot.
PHRASEOLOGY −
DESCEND VIA (STAR name and number) ARRIVAL,EXCEPT CROSS (fix, point, waypoint) ,
(revised altitude
information).
EXAMPLE −
“United 454 descend via the Haris One Arrival, exceptcross Haris at or above one six thousand.”
NOTE−
The aircraft should track laterally and vertically on theHaris One Arrival and should descend so as to cross Haris
at or above 16,000; remainder of the arrival must be flownas published.
PHRASEOLOGY −
CLIMB VIA SID, EXCEPT CROSS (fix, point, waypoint),(revised altitude information).
CLIMB VIA (SID name and number), EXCEPT CROSS
(fix, point, waypoint), (revised altitude information).
EXAMPLE −
1. “Climb via SID except cross Mkala at or above seventhousand.”
NOTE−
In Example 1, the aircraft will comply with the assignedSID departure lateral path and any published speed and
altitude restrictions and climb so as to cross Mkala at orabove 7,000; remainder of the departure must be flown as
published.
EXAMPLE −
2. (There is a published altitude at Dvine WP): “Proceeddirect Dvine, Climb via the Suzan Two departure except
cross Mkala at or above seven thousand.”
NOTE−
In Example 2, the air craft will join the Suzan Two departure
at Dvine, at the published altitude, and then comply withthe published lateral path and any published speed oraltitude restrictions. The aircraft will climb so as to crossMkala at or above 7,000; r emainder of the departure must
be flown as published.
6.When an aircraft has been issued an interim
altitude and after departure ATC can subsequentlyclear the aircraft to climb to the original top altitude
published in the SID instruct aircraft to “climb via
SID.” When issuing a new altitude and compliancewith published restrictions is still required instruct
aircraft to “climb via SID except maintain (altitude).”
PHRASEOLOGY −
CLIMB VIA SID.
CLIMB VIA SID except maintain (altitude).
EXAMPLE −
1. (An aircraft was issued the T eddd One departure, “climb
via SID” in the IFR departure clearance. An interimaltitude of 10,000 was issued instead of the published top
altitude of FL 230; after departure ATC is able to issue the
published top altitude): “Climb via SID.”
NOTE−
In Example 1, the air craft will track laterally and vertically
on the Teddd One departure and initially climb to 10,000;Once re-issued the “climb via” clearance the interimaltitude is cancelled aircraft will continue climb to FL230
while complying with published restrictions.
EXAMPLE −
2. (Using Example 1, after departure ATC is able to issue
an altitude higher than the published top altitude): “Climb
via SID except maintain flight level two six zero.”
NOTE−
In Example 2, the air craft will track laterally and vertically
on the Teddd One departure and initially climb to 10,000;once issued “climb via” clearance to FL260 the aircraftwill continue climb while complying with publishedrestrictions.
7.If it is necessary to assign an interim altitude
or assign a bottom or top altitude not contained on a
STAR or SID, the provisions of subparagraph 4-5-7h
JO 7110.65W 12/10/15
4−5−8 Altitude Assignment and Verificationmay be used in conjunction with subparagraph
4-5-7a.
PHRASEOLOGY −
DESCEND VIA THE (STAR name and number) ARRIVAL
EXCEPT AFTER (fix) MAINTAIN (revised altitude
information).
EXAMPLE −
“United 454 descend via the Eagul Five Arrival, exceptafter Geeno maintain one zero thousand.”
NOTE−
The aircraft should track laterally and vertically on theEagul Five Arrival and should descend so as to complywith all speed and altitude restrictions until reachingGeeno and then maintain 10,000. Upon reaching 10,000,
aircraft should maintain 10,000 until cleared by ATC to
continue to descend.
REFERENCE −
FAAO JO 7110.65, Para 4 −7−1, Clearance Information.
AIM, Para 5 −4−1, Standard T erminal Arrival (STAR) Procedures.
PHRASEOLOGY −
CLIMB VIA SID EXCEPT AFTER (waypoint name),
MAINTAIN (altitude).
EXAMPLE −
“Climb via SID except after Bar et, maintain flight level one
niner zero.”
NOTE−
1.Considering the principle that the last ATC clearance
issued has precedence over the previous, the phraseology“maintain (altitude)” alone cancels previously issuedaltitude restrictions, including SID/STAR altituderestrictions unless they are restated or modified, and
authorizes an unrestricted climb or descent. Speed
restrictions r emain in effect unless the controller explicitly
cancels the speed restrictions.
2.Restate “climb/descend via” and then use “except” or
“except maintain” phraseology to modify published
restrictions or assign a new top/bottom altitude. Use“resume” phraseology with “maintain” to rejoin a route
and assign a new altitude where compliance with published
altitude restrictions is not required.
REFERENCE −
F AAO JO 7110.65, Para 4-2-5, Route or Altitude Amendments
F AAO JO 7110.65, Para 5-6-2, Methods
AIM 4-4-10 Adherence to Clearance
AIM, Para 5 −2−8. Instrument Departure Procedur es (DP) − Obstacle
Departure Procedures (ODP) and Standard Instrument Departures(SID).
i.When a pilot is unable to accept a clearance,
issue revised instructions to ensure positive control
and approved separation.
NOTE−
1.14 CFR Section 91.123 states that a pilot is not allowedto deviate from an ATC clearance “that has been
obtained...unless an amended clearance is obtained”(except when an emergency exists).
2.A pilot is therefore expected to advise the controller if
a clearance cannot be accepted when the clearance is
issued. “We will try” and other such acknowledgements do
not constitute pilot acceptance of an ATC clearance.
3.Controllers are expected to issue A TC clearances which
conform with normal air craft operational capabilities and
do not require “last minute” amendments to ensure
approved separation.
4.“Expedite” is not to be used in lieu of appropriate
restrictions to ensure separation.
REFERENCE −
F AAO JO 7110.65, Para 10 −1−3, Providing Assistance.
4−5−8. ANTICIPATED ALTITUDE CHANGES
If practicable, inform an aircraft when to expect climb
or descent clearance or to request altitude change
from another facility.
PHRASEOLOGY −
EXPECT HIGHER/LOWER IN (number of miles or
minutes) MILES/MINUTES,
or
AT (fix). REQUEST ALTITUDE/FLIGHT LEVEL
CHANGE FROM (name of facility).
If required,
AT (time, fix, or altitude).
REFERENCE −
F AAO JO 7110.65, Para 2 −2−6, IFR Flight Progress Data.
4−5−9. ALTITUDE CONFIRMATION −
NONRADAR
a.Request a pilot to confirm assigned altitude on
initial contact and when position reports are received
unless:
NOTE−
For the purpose of this paragraph, “initial contact” means
a pilot’ s first radio contact with each sector/position.
1.The pilot states the assigned altitude, or
2.You assign a new altitude to a climbing or
descending aircraft, or
3.TERMINAL. The aircraft was transferred to
you from another sector/position within your facility
(intrafacility).
JO 7110.65W 12/10/15
4−5−9 Altitude Assignment and VerificationPHRASEOLOGY −
(In level flight situations),
VERIFY AT (altitude/flight level).
(In climbing/descending situations),
(if aircraft has been assigned an altitude below the lowest
useable flight level),
VERIFY ASSIGNED ALTITUDE (altitude).
(If aircraft has been assigned a flight level at or above the
lowest useable flight level),VERIFY ASSIGNED FLIGHT LEVEL (flight level).
b.USA. Reconfirm all pilot altitude read backs.
PHRASEOLOGY −
(If altitude read back is correct),AFFIRMATIVE (altitude).
(If altitude read back is not correct),
NEGATIVE. CLIMB/DESCEND AND MAINTAIN
(altitude),
or
NEGATIVE. MAINTAIN (altitude).
JO 7110.65W 12/10/15
4−6−1 Holding AircraftSection 6. Holding Aircraft
4−6−1. CLEARANCE TO HOLDING FIX
Consider operational factors such as length of delay,
holding airspace limitations, navigational aids,
altitude, meteorological conditions when necessary
to clear an aircraft to a fix other than the destinationairport. Issue the following:
a. Clearance limit (if any part of the route beyond
a clearance limit dif fers from the last routing cleared,
issue the route the pilot can expect beyond the
clearance limit).
PHRASEOLOGY −
EXPECT FURTHER CLEARANCE VIA (routing).
EXAMPLE −
“Expect further clearance via direct Stillwater V −O−R,
Victor Two T wenty-Six Snapy intersection, direct Newark.”
b. Holding instructions.
1.Holding instructions may be eliminated when
you inform the pilot that no delay is expected.
2.When the pattern is charted, you may omit all
holding instructions except the charted holding
direction and the statement “as published.” Always
issue complete holding instructions when the pilotrequests them.
NOTE−
The most generally used holding patterns are depicted onU.S. Government or commercially produced low/highaltitude en route, area, and STAR Charts.
PHRASEOLOGY −
CLEARED TO (fix), HOLD (direction), AS PUBLISHED,
or
CLEARED TO (fix), NO DELAY EXPECTED.
c. EFC. Do not specify this item if no delay is
expected.
1.When additional holding is expected at any
other fix in your facility’s area, state the fix and your
best estimate of the additional delay. When more than
one fix is involved, state the total additional en route
delay (omit specific fixes).
NOTE−
Additional delay information is not used to determine pilot
action in the event of two-way communications failure.Pilots are expected to pr edicate their actions solely on the
provisions of 14 CFR Section 91.185.PHRASEOLOGY −
EXPECT FURTHER CLEARANCE (time),
and if required,
ANTICIP ATE ADDITIONAL (time in minutes/hours)
MINUTE/HOUR DELAY AT (fix),
or
ANTICIP ATE ADDITIONAL (time in minutes/hours)
MINUTE/HOUR EN ROUTE DELAY.
EXAMPLE −
1.“Expect further clearance one niner two zero,
anticipate additional three zero minute delay at Sweet.”
2.“Expect further clearance one five one zero, anticipate
additional three zero minute en route delay.”
2.When additional holding is expected in an
approach control area, state the total additional
terminal delay.
PHRASEOLOGY −
EXPECT FURTHER CLEARANCE (time),
and if required,
ANTICIP ATE ADDITIONAL (time in minutes/hours)
MINUTE/HOUR TERMINAL DELAY.
3.TERMINAL. When terminal delays exist or
are expected, inform the appropriate center orapproach control facility so that the information can
be forwarded to arrival aircraft.
4.When delay is expected, issue items in
subparas a and b at least 5 minutes before the aircraft
is estimated to reach the clearance limit. If the trafficsituation requires holding an aircraft that is less than
5 minutes from the holding fix, issue these items
immediately.
NOTE−
1.The AIM indicates that pilots should start speed
reduction when 3 minutes or less from the holding fix. The
additional 2 minutes contained in the 5 −minute require-
ment are necessary to compensate for differentpilot/controller ETAS at the holding fix, minor differences
in clock times, and provision for sufficient planning and
reaction times.
2.When holding is necessary, the phrase “delay
indefinite” should be used when an accurate estimate of the
delay time and the r eason for the delay cannot immediately
JO 7110.65W 12/10/15
4−6−2 Holding Aircraftbe determined; i.e., disabled aircraft on the runway,
terminal or center sector saturation, weather belowlanding minimums, etc. In any event, every attempt should
be made to pr ovide the pilot with the best possible estimate
of his/her delay time and the reason for the delay.Controllers/supervisors should consult, as appropriate,
with personnel (other sectors, weather forecasters, the
airport management, other facilities, etc.) who can bestprovide this information.
PHRASEOLOGY −
DELAY INDEFINITE, (reason if known), EXPECT
FURTHER CLEARANCE (time). (After determining thereason for the delay, advise the pilot as soon as possible.)
EXAMPLE −
“Cleared to Dr ewe, hold west, as published, expect further
clearance via direct Sidney V −O−R one three one five,
anticipate additional two zero minute delay at Woody.”
“Cleared to Aston, hold west on Victor two twenty-five,
seven mile leg, left turns, expect further clearance oneniner two zero, anticipate additional one five minuteterminal delay.”
“Cleared to Wayne, no delay expected.”
“Cleared to Wally, hold north, as published, delay
indefinite, snow removal in progress, expect further
clearance one one three zero.”
4−6−2. CLEARANCE BEYOND FIX
a.If no delay is expected, issue a clearance beyond
the clearance limit as soon as possible and, whenever
possible, at least 5 minutes before the aircraft reaches
the fix.
b.Include the following items when issuing
clearance beyond a clearance limit:
1.Clearance limit or approach clearance.
2.Route of flight. Specify one of the following:
(a)Complete details of the route (airway,
route, course, fix(es), azimuth course, heading, arc, or
vector.)
(b)The phrase “via last routing cleared.” Use
this phrase only when the most recently issued
routing to the new clearance limit is valid and
verbiage will be reduced.
PHRASEOLOGY −
VIA LAST ROUTING CLEARED.3.Assigned altitude if different from present
altitude.
NOTE−
Except in the event of a two-way communications failure,when a clearance beyond a fix has not been r eceived, pilots
are expected to hold as depicted on U.S. Government orcommercially produced (meeting F AA requirements)
low/high altitude en route and area or STAR charts. If no
holding pattern is charted and holding instructions havenot been issued, pilots should ask ATC for holdinginstructions prior to reaching the fix. If a pilot is unable to
obtain holding instructions prior to reaching the fix, the
pilot is expected to hold in a standard pattern on the course
on which the aircraft approached the fix and requestfurther clearance as soon as possible.
4−6−3. DELAYS
a.Advise your supervisor or flow controller as
soon as possible when you delay or expect to delay
aircraft.
b.When arrival delays reach or are anticipated to
reach 30 minutes, take the following action:
1.EN ROUTE. The center responsible for
transferring control to an approach control facility or,
for a nonapproach control destination, the center inwhose area the aircraft will land must issue total delay
information as soon as possible after the aircraft
enters the center’s area. Whenever possible, the delay
information must be issued by the first center
controller to communicate with the aircraft.
REFERENCE −
F AAO7110.65, Para 5-14-9, ERAM Computer Entry of Hold
Information
2.TERMINAL. When tower en route control
service is being provided, the approach control
facility whose area contains the destination airportmust issue total delay information as soon as possible
after the aircraft enters its approach control area.
Whenever possible, the delay information must beissued by the first terminal controller to communicate
with the aircraft.
3.Unless a pilot requests delay information, the
actions specified in subparas 1 and 2 above may beomitted when total delay information is available to
pilots via ATIS.
PHRASEOLOGY −
(Airport) ARRIVAL DELAYS (time in minutes/hours).
JO 7110.65W 12/10/15
4−6−3 Holding Aircraft4−6−4. HOLDING INSTRUCTIONS
When issuing holding instructions, specify:
a.Direction of holding from the fix/waypoint.
b.Holding fix or waypoint.
NOTE−
The holding fix may be omitted if included at the beginning
of the transmission as the clearance limit.
c.Radial, course, bearing, track, azimuth, airway,
or route on which the aircraft is to hold.
d.Leg length in miles if DME or RNA V is to be
used. Specify leg length in minutes if the pilotrequests it or you consider it necessary.
e.Direction of holding pattern turns only if left
turns are to be made, the pilot requests it, or you
consider it necessary.
PHRASEOLOGY −
HOLD (direction) OF (fix/waypoint) ON (specified radial,
course, bearing, track, airway, azimuth(s), or route.)
If leg length is specified,
(number of minutes/miles) MINUTE/MILE LEG.
If direction of turn is specified,
LEFT/RIGHT TURNS.
f.Issue maximum holding airspeed advisories
when an aircraft is:
1.Approved to exceed the maximum airspeed
of a pattern, and is cleared into a holding pattern that
will protect for the greater speed; or
2.Observed deviating from the holding pattern
airspace area; or
3.Cleared into an airspeed restricted holding
pattern in which the icon has not been published.EXAMPLE −
Due to turbulence, a turboprop requests to exceed therecommended maximum holding airspeed. ATCS mayclear the aircraft into a pattern that protects for the
airspeed request, and must advise the pilot of the maximum
holding airspeed for the holding pattern airspace area.
PHRASEOLOGY −
“MAXIMUM HOLDING AIRSPEED IS TWO ONE ZERO
KNOTS.”
4−6−5. VISUAL HOLDING POINTS
You may use as a holding fix a location which the pilot
can determine by visual reference to the surface ifhe/she is familiar with it.
PHRASEOLOGY −
HOLD AT (location) UNTIL (time or other condition.)
REFERENCE −
F AAO JO 7110.65, Para 7 −1−4, Visual Holding of VFR Aircraft.
4−6−6. HOLDING FLIGHT PATH DEVIATION
Approve a pilot’s request to deviate from the
prescribed holding flight path if obstacles and traffic
conditions permit.
4−6−7. UNMONITORED NAVAIDs
Separate an aircraft holding at an unmonitored
NA V AID from any other aircraft occupying thecourse which the holding aircraft will follow if it does
not receive signals from the NA V AID.
4−6−8. ILS PROTECTION/CRITICAL AREAS
When conditions are less than reported ceiling
800 feet or visibility of 2 miles, do not authorize
aircraft to hold below 5,000 feet AGL inbound
toward the airport on or within 1 statute mile of thelocalizer between the ILS OM or the fix used in lieu
of the OM and the airport. USAF . The holding
restriction applies only when an arriving aircraft isbetween the ILS OM or the fix used in lieu of the OM
and the runway.
REFERENCE −
F AAO 7130.3, Holding Pattern Criteria.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−7−1 Arrival ProceduresSection 7. Arrival Procedures
4−7−1. CLEARANCE INFORMATION
Clear an arriving aircraft to a clearance limit by
specifying the following:
a.Name of fix or airport.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT.
Or
CLEARED TO (NAVAID name and type if known).OrCLEARED TO (intersection or waypoint name and type if
known).
b.Route of flight including a STAR/RNA V
STAR/FMSP and STAR/RNA V STAR/FMSP trans-
ition, if appropriate. Assign a STAR/RNA V
STAR/FMSP and STAR/RNA V STAR/FMSP trans-
ition to any aircraft in lieu of other routes; e.g.,airways or preferential arrival routes when the
routings are the same. The clearance must include the
name and transition, if necessary, of the ST AR/RNA V
STAR/FMSP to be flown.
TERMINAL : When the STAR/RNA V STAR/FMSP
transition is designed to provide course guidance to
multiple runways, the facility must state intended
runway number on initial contact, or as soon aspractical. If the runway assignment, or any
subsequent runway change, is not issued prior to
10 NM from the runway transition waypoint, radarvectors to final must be provided.
PHRASEOLOGY −
(STAR/RNAV STAR/FMSP name and number) ARRIVAL.
(STAR/RNAV STAR/FMSP name and number) ARRIVAL,(transition name) TRANSITION.CHANGE/AMEND TRANSITION TO (runway number).CHANGE/AMEND TRANSITION TO (runway number)
TURN LEFT/RIGHT or HEADING (heading) FOR
VECTOR TO FINAL APPROACH COURSE.
EXAMPLE −
“Rosewood One arrival.”
“Rosewood One arrival, Delta transition.”
“Change transition to Runway 09 right.”“Amend transition to Runway 22 left, turn right heading180 for vector to final approach course.”
NOTE−
1.If a civil pilot does not wish to use a STAR issued in an
ATC clearance or any other STAR published for thatlocation, the pilot is expected to advise ATC.2.Arrival procedure descriptive text contained within
parentheses (for example, “Devine One (RNA V) Arrival”)
are not included in arrival clearance phraseology.
c.Altitude instructions, as follows:
1.Assigned altitude; or
2.Instructions to vertically navigate on the
STAR/FMSP or STAR/FMSP transition.
EXAMPLE −
“Bayview Three Arrival, Helen T ransition, maintain Flight
Level Three Three Zero.”“Descend via the Civit One Arrival.”“Descend via the Lendy One Arrival, Runway 22 left.”
“Cross JCT at Flight Level Two Four Zero.”
“Descend via the Coast Two Arrival.”“Civit One Arrival, Descend and Maintain Flight LevelTwo Four Zero.”
REFERENCE −
F AAO JO 7110.65, Para 4 −5−7, Altitude Information.
AIM, Para 5 −4−1, Standard T erminal Arrival (STAR), Area Navigation
(RNAV) STAR, and Flight Management System Procedures (FMSP) for
Arrivals.
d.Issue holding instructions, EFC, and additional
delay information as required.
e.Instructions regarding further communications
as appropriate.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−17, Radio Communications Transfer.
4−7−2. ADVANCE DESCENT CLEARANCE
EN ROUTE
Take the following action when exercising control of
aircraft landing at an airport located in an adjacent
center’s control area near the common boundary:
a.Coordinate with the receiving facility for a
lower altitude and issue a clearance to the aircraft as
appropriate.
b.Initiate this action at a distance sufficient from
destination to allow for normal descent and speed
reduction.
4−7−3. SINGLE FREQUENCY
APPROACHES (SFA)
TERMINAL
Where SFA procedures for military single-piloted
turbojet aircraft on an IFR flight plan are contained in
JO 7110.65W 12/10/15
4−7−2 Arrival Proceduresa letter of agreement, do not require a radio frequency
change after the aircraft begins approach or after
initial contact during an en route descent until a
landing or low approach has been completed except
under the following conditions:
REFERENCE −
FAAO JO 7610.4, Special Operations, Para 9 −3−6, Single Frequency
Approach (SF A).P/CG Term − Single-Piloted Aircraft.
a.During daylight hours while the aircraft is in
VFR conditions.
b.On pilot request.
c.When pilot cancels IFR flight plan.
d.In an emergency situation.
e.When aircraft is cleared for visual approach.
4−7−4. RADIO FREQUENCY AND RADAR
BEACON CHANGES FOR MILITARYAIRCRAFT
When military single-piloted turbojet aircraft will
conduct an approach wholly or partly in IFR
conditions or at night, take the following action:
NOTE−
It is known that the mental distraction and the inadvertentmovement of aircraft controls resulting from the pilot’ sturning, reaching, or leaning to change frequencies caninduce spatial disorientation (vertigo).
a.Avoid radio frequency and radar beacon
changes to the maximum extent that communications
capabilities and traffic will permit. However, when
changes are required:
1.Give instructions early enough to allow the
change before the aircraft reaches the approach fix or
handoff point.
2.Keep frequency/radar beacon changes to a
minimum below 2,500 feet above the surface.
3.Avoid requiring frequency/radar beacon
changes during the time the aircraft is making a turn.
b.When traffic volume requires, a frequency
other than the one used by aircraft making approaches
may be assigned for use in transferring control to theapproach control facility.
TERMINALc.If practicable, use a frequency common to both
the GCA unit and approach control to minimize
frequency changes.
d.When a GCA unit is not able to communicate on
a common frequency, a change to a GCA frequencymay be authorized.
e.When a nonradar approach will be made,
aircraft may be instructed to change to towerfrequency when:
1.The reported ceiling is at or above 1,500 feet
and visibility is 5 statute miles or more.
2.The aircraft reports able to proceed by visual
reference to the surface.
3.The aircraft requests and is cleared for a
contact approach.
4.The aircraft is cleared for a visual approach.
f.Avoid making frequency/radar beacon changes
after an aircraft begins a high altitude approach.
g.In the event of a missed approach, do not require
a frequency/radar beacon change before the aircraft
reaches the missed approach altitude, the MEA, or the
MV A.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−6, Function Code Assignments.
4−7−5. MILITARY TURBOJET EN ROUTE
DESCENT
Provide military turbojet aircraft the same arrival
procedures that are provided for nonmilitary turbojet
aircraft except:
NOTE−
It is the r esponsibility of the pilot to request a high altitude
approach if he/she does not want normal arrival handling.
a.An en route descent may be used in a nonradar
environment; however, radar capability should existwhich will permit the aircraft to be vectored to the
final approach course of a published high altitude
instrument approach procedure or PAR/ASRapproach. Do not use this procedure if other than
normal vectoring delays are anticipated.
b.Prior to issuance of a descent clearance below
the highest initial approach fix altitude established for
any high altitude instrument approach procedure for
the destination airport inform the aircraft:
1.Type of approach to expect.
EXAMPLE −
“Expect V −O−R appr oach to runway three two.”
JO 7110.65W 12/10/15
4−7−3 Arrival Procedures2.Radar vectors will be provided to the final
approach course.
EXAMPLE −
“Expect surveillance/precision approach to runway one
seven; radar vectors to final approach course.”
3.Current weather whenever the ceiling is
below 1,000 feet ( USAF: 1,500 feet) or the highest
circling minimum whichever is greater, or when thevisibility is less than 3 miles.
EXAMPLE −
“Expect ILS approach to runway eight; radar vectors to
localizer course. Weather (reported weather).”
c.If A TIS is provided and the pilot advises he/she
has received the current ATIS broadcast before thedescent clearance in subpara b is issued, omit those
items in subpara b that are contained in the broadcast.
d.To avoid requiring an aircraft to fly at low
altitudes for an excessive distance, descent clearance
should be issued at a point determined by adding 10to the first two digits of the flight level.
EXAMPLE −
For FL 370, 37 /C0041 10 = 47 miles.
NOTE−
Turbojet en route descents are based on a rate of descentof 4,000 to 6,000 feet per minute.
e.Do not terminate the en route descent of an
aircraft without the consent of the pilot except asrequired by radar outage or an emergency situation.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−4, Altitude Assignment for Military High
Altitude Instrument Approaches.
4−7−6. ARRIVAL INFORMATION
EN ROUTE
a.Forward the following information to nonap-
proach control towers soon enough to permit
adjustment of the traffic flow or to FSSs soon enough
to provide local airport advisory where applicable:
1.Aircraft identification.
2.Type of aircraft.
3.ETA.
4.Type of instrument approach procedure the
aircraft will execute; or
5.For SVFR, the direction from which the
aircraft will enter Class B, Class C, Class D, orClass E surface area and any altitude restrictions that
were issued; or
6.For aircraft executing a contact approach the
position of the aircraft.
NOTE−
Specific time requirements are usually stated in a letter ofagreement.
b.Forward the following information to approach
control facilities before transfer of control
jurisdiction:
NOTE−
Transfer points are usually specified in a letter of
agreement.
1.Aircraft identification.
2.Type of aircraft and appropriate aircraft
equipment suffix.
3.ETA or actual time, and proposed or actual
altitude over clearance limit. The ETA need not be
given if the arrival information is being forwardedduring a radar handoff.
4.Clearance limit (when other than the
destination airport) and EFC issued to the aircraft.Clearance li mit may be omitted when provided for in
a letter of agreement.
5.Time, fix, or altitude when control responsi-
bility is transferred to the approach control facility.
This information may be omitted when provided for
in a letter of agreement.
PHRASEOLOGY −
(Identification), (type of aircraft), ESTIMATED/OVER(clearance limit), (time), (altitude), EFC (time).
If required,
YOUR CONTROL,
or
YOUR CONTROL AT (time, fix or altitude).
4−7−7. WEATHER INFORMATION
EN ROUTE
When an available official weather report indicates
weather conditions are below a 1,000 −foot
(USAF: 1,500−foot) ceiling or below the highest
circling minimum, whichever is higher, or less than
three-miles visibility for the airport concerned,
transmit the weather report and changes classified as5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−7−4 Arrival Proceduresspecial weather observations to an arriving aircraft
prior to or as part of the approach clearance when:
a.It is transmitted directly to the pilot via center
controller-to-pilot communications.
b.It is relayed through a communications station
other than an air carrier company radio or through a
nonapproach control facility. You may do this bytelling the station or nonapproach control facility to
issue current weather.
4−7−8. BELOW MINIMA REPORT BY PILOT
If an arriving aircraft reports weather conditions are
below his/her landing minima:
NOTE−
Determination that existing weather/visibility is adequatefor approach/landing is the responsibility of thepilot/aircraft operator.
a.Issue appropriate instructions to the aircraft to
hold or proceed to another airport.
b.Adjust, as necessary, the position in the landing
sequence of any other aircraft desiring to make
approaches and issue approach clearances accord-
ingly.
4−7−9. TRANSFER OF JURISDICTION
Transfer radio communications and control respons-
ibility early enough to allow the receiving facility to
clear an aircraft beyond the clearance limit before the
aircraft reaches it.
4−7−10. APPROACH INFORMATION
a.Both en route and terminal approach control
sectors must provide current approach information to
aircraft destined to airports for which they provideapproach control services. This information must be
provided on initial contact or as soon as possible
thereafter. Approach information contained in the
ATIS broadcast may be omitted if the pilot states the
appropriate ATIS code. For pilots destined to anairport without ATIS, items 3 −5 below may be
omitted after the pilot advises receipt of the
automated weather; otherwise, issue approachinformation by including the following:
1.Approach clearance or type approach to be
expected if two or more approaches are published andthe clearance limit does not indicate which will be
used.
2.Runway if different from that to which the
instrument approach is made.
3.Surface wind.
4.Ceiling and visibility if the reported ceiling at
the airport of intended landing is below 1,000 feet or
below the highest circling minimum, whichever isgreater, or the visibility is less than 3 miles.
5.Altimeter setting for the airport of intended
landing.
REFERENCE −
F AAO JO 7110.65, Chapter 2, Section 7, Altimeter Settings.
b.Upon pilot request, controllers must inform
pilots of the frequency where automated weather data
may be obtained and, if appropriate, that airport
weather is not available.
PHRASEOLOGY −
(Airport) AWOS/ASOS WEATHER AVAILABLE ON
(frequency).
1.ASOS/AWOS must be set to provide one
minute weather at uncontrolled airports that are
without ground −to−air weather broadcast capability
by a CWO, NWS or FSS observer.
2.Controllers will consider the long −line
disseminated weather from an automated weathersystem at an uncontrolled airport as trend information
only and must rely on the pilot for the current weather
information for that airport.
3.Controllers must issue the last long −line
disseminated weather to the pilot if the pilot is unable
to receive the ASOS/AWOS broadcast.
NOTE−
Aircraft destined to uncontrolled airports, which have
automated weather data with br oadcast capability, should
monitor the ASOS/AWOS frequency to ascertain thecurrent weather at the airport. The pilot should advise the
controller when he/she has r eceived the br oadcast weather
and state his/her intentions.
c.Issue any known changes classified as special
weather observations as soon as possible. Special
weather observations need not be issued after they are
included in the A TIS broadcast and the pilot states the
appropriate ATIS code.
d.Advise pilots when the ILS on the runway in use
is not operational if that ILS is on the same frequency
as an operational ILS serving another runway.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−7−5 Arrival ProceduresEXAMPLE −
“Expect visual approach runway two five right,runway two five right I −L−S not operational.”
REFERENCE −
F AAO JO 7110.65, Para 2 −7−2, Altimeter Setting Issuance Below
Lowest Usable FL.
F AAO JO 7110.65, Para 5 −10−2, Approach Information.
14 CFR Section 91.129 Operations in Class D Airspace,Subpara (d)(2).
e.TERMINAL : If multiple runway transitions are
depicted on a STAR procedure, advise pilots of the
runway assignment on initial contact or as soon as
possible thereafter.
4−7−11. ARRIVAL INFORMATION BY
APPROACH CONTROL FACILITIES
TERMINAL
a.Forward the following information to nonap-
proach control towers soon enough to permit
adjustment of the traffic flow or to FSSs soon enough
to provide local airport advisory where applicable:
1.Aircraft identification.
2.Type of aircraft.
3.ETA.
4.Type of instrument approach procedure the
aircraft will execute; or
5.For SVFR, the direction from which the
aircraft will enter Class B, Class C, Class D, or
Class E surface area and any altitude restrictions that
were issued; or
6.For aircraft executing a contact approach, the
position of the aircraft.
NOTE−
Specific time requirements are usually stated in a letter ofagreement.
b.Forward the following information to the tower
when the tower and TRACON are part of the same
facility:
1.Aircraft identification.
2.Type aircraft if required for separation
purposes.
3.Type of instrument approach procedure
and/or runway if differing from that in use.
NOTE−
The local controller has the responsibility to determinewhether or not conditions are adequate for the use of ATTSdata on the CTRD where a facility directive authorizes its
use for the transfer of arrival data.
REFERENCE −
F AAO JO 7210.3, Para 11 −2−4, Use of Modify and Quick Look
Functions.
F AAO JO 7210.3, Para 11 −8−4, Use of ST ARS Quick Look Functions.
c.Where the collocated or satellite tower has
ATTS data displayed on its CTRD, the ATTS modify
or quick look functions may be used to forward
arrival data provided that a facility directive at thecollocated tower or a letter of agreement with the
satellite tower exists which outlines procedures for
using ATTS for transferring this data.
d.Forward the following information to centers:
1.Where two or more instrument approach
procedures are published for the airport, the
particular procedure which an aircraft can expect or
that it will be vectored toward the airport for a visual
approach.
2.Highest altitude being used by the approach
control facility at the holding fix.
3.Average time interval between successive
approaches.
4.Arrival time of aircraft over the holding fix or,
if control has been transferred to you before an
aircraft has reached the fix, a statement or otherindication acknowledging receipt of control
responsibility.
5.Revised EFC if different by 10 minutes or
more from that issued by the center.
6.Missed approaches if they affect center
operations.
7.Information relating to an unreported or
overdue aircraft.
4−7−12. AIRPORT CONDITIONS
a.EN ROUTE. Before issuing an approach
clearance or en route descent, and subsequently as
changes occur, inform an aircraft of any abnormal
operation of approach and landing aids and ofdestination airport conditions that you know of which
might restrict an approach or landing.
NOTE−
1.Airport conditions information, in the provision of en
route approach control service, does not include
information pertaining to cold temperature compensation
or the airport surface environment other than the landing
area(s) or obstruction information for airc raft that will be5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−7−6 Arrival Procedurescleared for an instrument approach. Accordingly, D
NOTAMs that contain the keywords TAXIWAY (TWY),RAMP , APRON, or SERVICE (SVC) are not r equired to be
issued. Additionally, Obstruction NOTAMs (OBST) are not
required to be issued if an aircraft will be cleared for an
instrument approach.
2.When advised of special use airspace (SUA) or military
training route (MTR) activation, appropriate action istaken to separate nonparticipating IFR aircraft from those
activities when required, and/or to issue applicable
advisories as warranted. When meeting this requirement,
there is no requir ement for controllers to additionally issue
the associated D NOTAM activating that SUA or MTR to
the pilot. Accor dingly, D NOT AMs for SUA that contain the
accountability codes SUAE, SUAC, and SUAW are not
required to be issued.
b.TERMINAL. On first contact or as soon as
possible thereafter, and subsequently as changes
occur, inform an aircraft of any abnormal operationof approach and landing aids and of destination
airport conditions that you know of which might
restrict an approach or landing. This information may
be omitted if it is contained in the A TIS broadcast and
the pilot states the appropriate ATIS code.
REFERENCE −
F AAO JO 7110.65, Chapter 3, Section 3, Airport Conditions.
c.TERMINAL. Where RCRs are provided, trans-
mit this information to USAF and ANG aircraft in
accordance with one of the following. Issue the RCR
to other aircraft upon pilot request.1.Before or when an approach clearance is
issued.
2.Before an en route descent clearance is
issued.
3.Prior to departure.
4.As soon as possible after receipt of any
subsequent changes in previously issued RCR
information.
NOTE−
1.USAF has established RCR pr ocedures for determining
the average deceleration readings of runways underconditions of water, slush, ice, or snow. The use of RCRcode is dependent upon the pilot having a “stopping
capability chart” specifically applicable to his/her
aircraft.
2.USAF offices furnish RCR information at airports
serving USAF and ANG aircraft.
REFERENCE −
F AAO JO 7110.65, Para 3 −3−1, Landing Area Condition.
4−7−13. SWITCHING ILS RUNWAYS
TERMINAL
When a change is made from one ILS to another at
airports equipped with multiple systems which are
not used simultaneously, coordinate with the
facilities which use the fixes formed by reference to
these NA V AIDs.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−8−1 Approach Clearance ProceduresSection 8. Approach Clearance Procedures
4−8−1. APPROACH CLEARANCE
a.Clear aircraft for “standard” or “special”
instrument approach procedures only.
1.To require an aircraft to execute a particular
instrument approach procedure, specify in theapproach clearance the name of the approach as
published on the approach chart. Where more than
one procedure is published on a single chart and aspecific procedure is to be flown, amend the approach
clearance to specify execution of the specific
approach to be flown. If only one instrumentapproach of a particular type is published, the
approach needs not be identified by the runway
reference.
2.An aircraft conducting an ILS or LDA
approach must be advised at the time an approach
clearance is issued when the glideslope is reported out
of service, unless the title of the published approachprocedure allows (for example, ILS or LOC Rwy 05).
3.Standard instrument approach procedures
(SIAP) must begin at an initial approach fix (IAF) or
an intermediate fix (IF) if there is not an IAF.
4.Where adequate radar coverage exists, radar
facilities may vector aircraft to the final approach
course in accordance with Paragraph 5-9-1, Vectors
to Final Approach Course, and Paragraph 5-9-2, FinalApproach Course Interception.
5.Where adequate radar coverage exists, radar
facilities may clear an aircraft to any fix 3 NM or more
prior to the FAF, along the final approach course, atan intercept angle not greater than 30 degrees.
6.Controllers must not disapprove a pilot
request to cold temperature compensate in conjunc-
tion with the issuance of an approach clearance.
PHRASEOLOGY −
CLEARED (type) APPROACH.
(To authorize a pilot to execute his/her choice of instrument
approach),
CLEARED APPROACH.
(Where more than one procedure is published on a single
chart and a specific procedure is to be flown),CLEARED (specific procedure to be flown) APPROACH.
(To authorize a pilot to execute an ILS or an LDA approach
when the glideslope is out of service)
CLEARED (ILS/LDA) APPROACH, GLIDESLOPE
UNUSABLE.(When the title of the approach procedure contains “orLOC”)
CLEARED LOCALIZER APPROACH
EXAMPLE −
“Cleared Approach.”“Cleared (V-O-R/I-L-S/Localizer) Approach.”“Cleared L-D-A Runway Three-Six Approach.”
“Cleared Localizer Back Course Runway One-Three
Approach.”“Cleared (GPS/RNAV Z) Runway Two-Two Approach.”“Cleared BRANCH ONE Arrival and (ILS/RNAV) Runway
One-Three Approach.”
“Cleared I-L-S Runway Three-Six Approach, glideslope
unusable.”“Cleared S-D-F Approach.”“Cleared G-L-S Approach.”
NOTE−
1.Clearances authorizing instrument approaches are
issued on the basis that, if visual contact with the ground
is made before the approach is completed, the entire
approach procedure will be followed unless the pilotreceives approval for a contact approach, is cleared for avisual approach, or cancels their IFR flight plan.
2.Approach clearances are issued based on known traffic.
The receipt of an approach clearance does not relieve the
pilot of his/her responsibility to comply with applicable
Parts of T itle 14 of the Code of Federal Regulations and the
notations on instrument appr oach charts which levy on the
pilot the responsibility to comply with or act on an
instruction; for example, “Straight-in minima notauthorized at night,” “Pro cedure not authorized when
glideslope/glidepath not used,” “Use of pr ocedure limited
to aircraft authorized to use airport,” or “Procedure notauthorized at night” or Snowflake icon with associated
temperature.
3.In some cases, the name of the approach, as published,
is used to identify the approach, even though a componentof the approach aid, other than the localizer on an ILS is
inoperative.
4.Where more than one procedure to the same runway is
published on a single chart, each must adhere to all final
approach guidance contained on that chart, even though5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−8−2 Approach Clearance Procedureseach procedure will be treated as a separate entity when
authorized by ATC.
5.The use of alphabetical identifiers in the approach
name with a letter from the end of the alphabet; forexample, X, Y, Z, such as “HI TACAN Z Rwy 6L or
RNAV(GPS) Y Rwy 04”, denotes multiple straight-in
approaches to the same runway that use the same appr oach
aid.
6.Alphabetical suffixes with a letter from the beginning of
the alphabet; for example, A, B, C, denote a pr ocedure that
does not meet the criteria for straight-in landing minimums
authorization.
7.14 CFR Section 91.175(j) requires a pilot to receive a
clearance to conduct a procedur e turn when vectored to a
final approach course or fix, conducting a timed appr oach,
or when the procedure specifies “NO PT .
”
8.An aircraft which has been cleared to a holding fix and
prior to reaching that fix is issued a clearance for an
approach, but not issued a revised routing; that is,“proceed direct to....” may be expected to proceed via the
last assigned route, a feeder route (if one is published on the
approach chart), and then to commence the approach aspublished. If, by following the route of flight to the holding
fix, the aircraft would overfly an IAF or the fix associated\
with the beginning of a feeder route to be used, the air craft
is expected to commence the approach using the publishedfeeder r oute to the IAF or from the IAF as appr opriate; that
is, the aircraft would not be expected to overfly and return
to the IAF or feeder route.
9.Approach name items contained within parenthesis; for
example, RNAV (GPS) Rwy 04, are not included inapproach clearance phraseology.
10.Pilots are required to advise ATC when intending to
apply cold temperature compensation to instrument
approach segments. Pilots must advise ATC of the amount
of compensation required for each affected segment on
initial contact or as soon as possible. Pilots are not
required to advise ATC when correcting on the final
segment only. Controllers may delay the issuance of an
approach clearance to comply with approved separation
requirements when informed that a pilot will apply cold
temperature compensation (CTC). Pilots will not apply
altitude compensation, unless authorized, when assigned
an altitude prior to an approach clearance. Consideration
should be given to vectoring aircraft at or above the
requested compensating altitude if possible. This
eliminates pilots having to climb once on the approach.REFERENCE −
F AAO 8260.3, United States Standard for Terminal InstrumentProcedures (TERPS).
P/CG Term – Cold Temperature Compensation
AIM, Paragraph 5-1-17, Cold Temperature Operations
AIM, Paragraph 5-5-4, Instrument Approach
b.For aircraft operating on unpublished routes,
issue the approach clearance only after the aircraft is:
1.Established on a segment of a published route
or instrument approach procedure, or (SeeFIG 4−8−1)
EXAMPLE −
The aircraft is established on a segment of a publishedroute at 5,000 feet. “Cleared V-O-R Runway Three FourApproach.”
FIG 4−8−1
Approach Clearance Example
2.Assigned an altitude to maintain until the
aircraft is established on a segment of a published
route or instrument approach procedure. (See FIG4
-8-2.)
EXAMPLE −
Aircraft 1 is cleared direct LEFTT. The MVA in the area is
3,000 feet, and the aircraft is at 4,000 feet. “Cross LEFTTat or above three thousand five hundred, cleared RNAVRunway One Eight Approach.”
The MVA in the area is 3,000 feet and Aircraft 2 is at 3,000
feet. “Cleared direct LEFTT direct CENTR, maintain three
thousand until CENTR, cleared straight-in RNAV Runway
One Eight Approach.”3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−8−3 Approach Clearance ProceduresFIG 4−8−2
Approach Clearance Example
NOTE−
1.The altitude assigned must assure IFR obstruction
clearance from the point at which the approach clearance
is issued until established on a segment of a published r oute
or instrument approach procedure.
2.If the altitude assignment is VFR-on-top, it is
conceivable that the pilot may elect to remain high until
arrival over the final approach fix which may require thepilot to circle to descend so as to cross the final approach
fix at an altitude that would permit landing.
3.An aircraft is not established on an approach until at or
above an altitude published on that segment of theapproach.
REFERENCE −
F AAO 8260.3 United States Standard for Terminal Instrument
Procedures (TERPS), Para 10-2
c.Except for visual approaches, do not clear an
aircraft direct to the FAF unless it is also an IAF,
wherein the aircraft is expected to execute thedepicted procedure turn or hold-in-lieu of procedure
turn.
d.Intercept angles greater than 90 degrees may be
used when a procedure turn, a hold-in-lieu of
procedure turn pattern, or arrival holding is depicted
and the pilot will execute the procedure.
e.If a procedure turn, hold-in-lieu of procedure
turn, or arrival holding pattern is depicted and the
angle of intercept is 90 degrees or less, the aircraft
must be instructed to conduct a straight-in approachif A TC does not want the pilot to execute a procedure
turn or hold-in-lieu of procedure turn. (See
FIG 4−8−3)PHRASEOLOGY −
CLEARED STRAIGHT-IN (type) APPROACH
NOTE−
1.Restate “cleared straight-in” in the approach clear-
ance even if the pilot was advised earlier to expect astraight-in approach.
2.Some approach charts have an arrival holding pattern
depicted at the IAF using a “thin line” holding symbol. It
is charted where holding is frequently required prior to
starting the approach procedure so that detailed holdinginstructions are not required. The arrival holding pattern
is not authorized unless assigned by ATC.
EXAMPLE −
“Cleared direct SECND, maintain at or above threethousand until SECND, cleared straight-in ILS RunwayOne-Eight approach.”
REFERENCE −
AIM, Paragraph 5-4-5, Instrument Approach Procedure Charts AIM, Paragraph 5-4-9, Procedure Turn and Hold-in-lieu of Procedure
Turn
FIG 4−8−3
Approach Clearance Example
For Aircraft On a Conventional Approach
EXAMPLE −
Aircraft 1 can be cleared direct to XYZ VORTAC, orSECND because the intercept angle is 90 degrees or less.
Aircraft 2 cannot be cleared to XYZ VORTAC because the
intercept angle is greater than 90 degrees.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−8−4 Approach Clearance ProceduresAircraft 2 can be cleared to SECND if allowed to execute
the hold-in-lieu of procedure turn pattern.
f.Except when applying radar procedures, timed
or visual approaches, clear an aircraft for an approachto an airport when the preceding aircraft has landed
or canceled IFR flight plan.
g.Where instrument approaches require radar
monitoring and radar services are not available, donot use the phraseology “cleared approach,” which
allows the pilot his/her choice of instrument
approaches.
RNA V APPLICATION
h.For RNA V −equipped aircraft operating on
unpublished routes, issue approach clearance forconventional or RNA V SIAP including approaches
with RF legs only after the aircraft is: (See FIG
4−8−4).
1.Established on a heading or course direct to
the IAF at an intercept angle not greater than 90
degrees and is assigned an altitude in accordance with
b2. Radar monitoring is required to the IAF forRNA V (RNP) approaches when no hold −in−lieu of
procedure turn is executed.
EXAMPLE −
Aircraft 1 can be cleared direct to CENTR. The intercept
angle at that IAF is 90 degrees or less. The minimum
altitude for IFR operations (14 CFR, section 91.177) along
the flight path to the IAF is 3,000 feet. If a hold in lieu ofprocedure turn pattern is depicted at an IAF and a TAA isnot defined, the aircraft must be instructed to conduct a
straight-in approach if ATC does not want the pilot to
execute a hold-in-lieu procedure turn. “Cleared directCENTR, maintain at or above thr ee thousand until CENTR,
cleared straight-in RNAV Runway One-Eight Approach.”
2.Established on a heading or course direct to
the IF at an angle not greater than 90 degrees,
provided the following conditions are met:
(a)Assign an altitude in accordance with b2
that will permit a normal descent to the FAF.
NOTE−
Controllers should expect aircraft to descend atapproximately 150-300 feet per nautical mile whenapplying guidance in subpara d2(a).
(b)Radar monitoring is provided to the IF.
(c)The SIAP must identify the intermediate
fix with the letters “IF .”(d)For procedures where an IAF is pub-
lished, the pilot is advised to expect clearance to the
IF at least 5 miles from the fix.
EXAMPLE −
“Expect direct CENTR for RNAV Runway One-Eight
Approach.”
3.Established on a heading or course direct to a
fix between the IF and FAF, at an intercept angle not
greater than 30 degrees, and assigned an altitude inaccordance with b2.
EXAMPLE −
Aircraft 1 is more than 5 miles from SHANN. The minimum
altitude for IFR operations (14 CFR Section 91.177) along
the flight path to SHANN is 3,000 feet. SHANN is a stepdown fix between the IF/IAF (CENTR) and the F AF . To
clear Aircraft 1 to SHANN, ATC must ensure the intercept
angle for the intermediate segment at SHANN is notgreater than 30 degrees and must be cleared to an altitude
that will allow a normal descent to the F AF. “Cleared direct
SHANN, cr oss SHANN at or above three thousand, cleared
RNAV Runway One-Eight Approach.”
REFERENCE −
F AAO 7110.65, Par 5-6-2, Methods
F AAO 7110.65, Chapter 5, Section 9, Radar Arrivals
FIG 4−8−4
Approach Clearance Example
For RNA V Aircraft
EXAMPLE −
Aircraft 2 cannot be cleared direct to CENTR unless the
aircraft is allowed to execute the hold-in-lieu of procedure
turn. The intercept angle at that IF/IAF is greater than3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−8−5 Approach Clearance Procedures90 degrees. The minimum altitude for IFR operations
(14 CFR Section 91.177) along the flight path to the IAF is
3,000 feet. “Cleared direct CENTR, maintain at or abovethree thousand until CENTR, cleared RNAV Runway
One-Eight approach.” The pilot is expected to proceed
direct CENTR and execute the hold-in-lieu of procedureturn.
Aircraft 2 can be cleared dir ect LEFTT. The intercept angle
at that IAF is 90 degrees or less. The minimum altitude for
IFR operations (14 CFR Section 91.177) along the flightpath to the IAF is 3,000 feet. “Cleared direct LEFTT,maintain at or above three thousand until LEFTT, cleared
RNAV Runway One-Eight Approach.” The pilot does not
have to be cleared for a straight-in approach since no
hold-in-lieu of procedure turn pattern is depicted atLEFTT.
REFERENCE −
FAAO JO 7110.65, Chapter 5, Section 9, Radar Arrivals
i.Clear RNA V −equipped aircraft conducting
RNA V instrument approach procedures that contain
radius to fix (RF) legs:
1.Via published transitions, or
2.In accordance with paragraph d.
3.Do not clear aircraft direct to any waypoint
beginning or within an RF leg.
4.Do not assign fix/waypoint crossing speeds in
excess of charted speed restrictions.
NOTE−
1.RNAV approaches (containing RF legs) that commence
at 10,000 feet or above r equire special pr ocedures that will
be site specific and specified in a facility directive.
2.An RF leg is defined as a curved segment indicating a
constant radius circular path about a defined turn center
that begins at a waypoint. RF legs may have maximum
airspeeds charted for pr ocedural containment that must be
followed.
3.If an aircraft is vectored off the procedure, expect the
aircraft to request a return to an IAF .FIG 4−8−5
Radius to Fix (RF) and Track to Fix (TF)
NOTE−
1.The segment between THIRD and FORTH in FIG
4-8-5 is an RF leg.
2.The straight segments between waypoints in FIG 4-8-5
are TF legs.
j.Where a terminal arrival area (TAA) has been
established to support RNA V approaches, use the
procedures under subpara b1 and b2 above.(See FIG 4−8−6.)
EXAMPLE −
Aircraft 1: The aircraft has crossed the TAA boundary and
is therefore established on a segment of the approach.“Cleared R-NAV Runway One-Eight Approach.”
Aircraft 2: The aircraft is inbound to the CHARR IAF on an
unpublished direct route at 7,000 feet. The minimum IFRaltitude for IFR operations (14 CFR Section 91.177) along
this flight path to the IAF is 5,000 feet. “Cleared direct5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−8−6 Approach Clearance ProceduresCHARR, maintain at or above five thousand until entering
the TAA, cleared RNAV Runway One-Eight Approach.”
FIG 4−8−6
Basic “T” and TAA Design
k.When GPS TESTING NOTAMs are published
and testing is actually occurring, inform pilots
requesting or cleared for a RNA V approach that GPS
may not be available and request intentions. Do notresume RNA V approach operations until certain that
GPS interference is no longer a factor or such GPS
testing exercise has ceased.
l.During times when pilots report GPS anomalies,
request the pilot’s intentions and/or clear that aircraft
for an alternative approach, if available andoperational. Announce to other aircraft requesting an
RNAV approach that GPS is reported unavailable and
request intentions.
REFERENCE −
FAAO JO 7110.65, Para 2 −1−10, NAV AID Malfunctions.
FAAO JO 7110.65, Para 4 −7−12, Airport Conditions.
m.When clearing an aircraft for an RNA V
approach, and a GPS NOTAM is published (a WAAS
NOTAM is not issued), both GPS and WAAS may
become unavailable. Therefore, when a GPSanomaly is reported, request the pilot’s intentions.
NOTE−
WAAS UNAVAILABLE NOTAMs are published to indicate
a failure of a WAAS system component. Airborne
GPS/WAAS equipment may revert to GPS −only operation
which satisfies the requirements for basic RNAV (GPS)approaches to the airport of intended landing or filedalternate airport, if airborne equipment is approved for
such operations.
4−8−2. CLEARANCE LIMIT
Issue approach or other clearances, as required,
specifying the destination airport as the clearancelimit if airport traffic control service is not provided
even though this is a repetition of the initial clearance.
PHRASEOLOGY −
CLEARED TO (destination) AIRPORT
4−8−3. RELAYED APPROACH CLEARANCE
TERMINAL
Include the weather report, when it is required and
available, when an approach clearance is relayedthrough a communication station other than an air
carrier company radio. You may do this by telling the
station to issue current weather.
4−8−4. ALTITUDE ASSIGNMENT FOR
MILITARY HIGH ALTITUDE INSTRUMENTAPPROACHES
Altitudes above those shown on the high altitude
instrument approach procedures chart may bespecified when required for separation.
NOTE−
To preclude the possibility of aircraft exceedingrate-of-descent or airspeed limitations, the maximum
altitudes which may be assigned for any portion of the high
altitude instrument approach pr ocedure will be determined
through coordination between the ATC facility concernedand the military authority which originated the highaltitude instrument approach procedure.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−5, Military Turbojet En Route Descent.
4−8−5. SPECIFYING ALTITUDE
Specify in the approach clearance the altitude shown
in the approach procedures when adherence to that
altitude is required for separation. When vertical
separation will be provided from other aircraft by
pilot adherence to the prescribed maximum,minimum, or mandatory altitudes, the controller may
omit specifying the altitude in the approach
clearance.
NOTE−
Use F AA or NGA instrument approach procedures chartsappropriate for the aircraft executing the approach.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−8−7 Approach Clearance Procedures4−8−6. CIRCLING APPROACH
a.Circling approach instructions may only be
given for aircraft landing at airports with operational
control towers.
b.Include in the approach clearance instructions
to circle to the runway in use if landing will be made
on a runway other than that aligned with the directionof instrument approach. When the direction of the
circling maneuver in relation to the airport/runway is
required, state the direction (eight cardinal compasspoints) and specify a left or right base/downwind leg
as appropriate.
PHRASEOLOGY −
CIRCLE TO RUNWAY (number),
or
CIRCLE (direction using eight cardinal compass points)
OF THE AIRPORT/RUNWAY FOR A LEFT/RIGHT
BASE/DOWNWIND TO RUNWAY (number).
NOTE−
Where standard instrument approach procedures (SIAPs)
authorize circling approaches, they provide a basic
minimum of 300 feet of obstacle clearance at the MDAwithin the circling area considered. The dimensions ofthese ar eas, expressed in distances from the runways, vary
for the different approach categories of aircraft. In some
cases a SIAP may otherwise restrict circling approach
maneuvers.
c.Do not issue clearances, such as “extend
downwind leg,” which might cause an aircraft toexceed the circling approach area distance from the
runways within which required circling approach
obstacle clearance is assured.
4−8−7. SIDE−STEP MANEUVER
TERMINAL
Side-step Maneuver. When authorized by an instru-
ment approach procedure, you may clear an aircraft
for an approach to one runway and inform the aircraft
that landing will be made on a parallel runway.
EXAMPLE −
“Cleared I −L−S Runway seven left approach. Side-step to
runway seven right.”
NOTE−
Side-step maneuvers require higher weather minima/
MDA. These higher minima/MDA are published on theinstrument approach charts.REFERENCE −
F AAO JO 7110.65, Para 3 −3−2, Closed/Unsafe Runway Information.
P/CG Term − Side−step Maneuver.
4−8−8. COMMUNICATIONS RELEASE
If an IFR aircraft intends to land at an airport not
served by a tower or FSS, approve a change to the
advisory service frequency when you no longerrequire direct communications.
PHRASEOLOGY −
CHANGE TO ADVISORY FREQUENCY APPROVED.
NOTE−
An expeditious frequency change permits the aircraft toreceive timely local airport traffic information in
accordance with AC 90 −42, T raffic Advisory Practices at
Airports Without Operating Control Towers.
4−8−9. MISSED APPROACH
Except in the case of a VFR aircraft practicing an
instrument approach, an approach clearance automat-
ically authorizes the aircraft to execute the missed
approach procedure depicted for the instrument
approach being flown. An alternate missed approach
procedure as published on the appropriate FAA
Form 8260 or appropriate military form may be
assigned when necessary. Once an aircraft com-mences a missed approach, it may be radar vectored.
NOTE−
1.Alternate missed approach pr ocedures are published on
the appropriate F AA Form 8260 or appropriate militaryform and r equire a detailed clearance when they are issued
to the pilot.
2.In the event of a missed approach involving a turn,
unless otherwise cleared, the pilot will proceed to themissed approach point before starting that turn.
3.Pilots must advise ATC when intending to apply cold
temperature compensation and of the amount of
compensation required. Pilots will not apply altitude
compensation, unless authorized, when assigned an
altitude if pr ovided an initial heading to fly or radar vectors
in lieu of published missed approach procedures.
Consideration should be given to vectoring aircraft at or
above the requested compensating altitude if possible.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−1 1, Practice Approaches.
F AAO JO 7110.65, Para 5 −6−3, Vectors Below Minimum Altitude.
F AAO JO 7110.65, Para 5 −8−3, Successive or Simultaneous
Departures.
F AAO 8260.19, Flight Procedures and Airspace, Paras 404 and 815.F AAO 8260.3, United States Standard for Terminal Instrument
Procedures (TERPS), Paras 275, 278, 943, 957, and 997.
AIM, Paragraph 5-5-5, Missed Approach5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
4−8−8 Approach Clearance Procedures4−8−10. APPROACH INFORMATION
Specify the following in t he approach clearance when
the pilot says he/she is unfamiliar with the procedure:
a.Initial approach altitude.
b.Direction and distance from the holding fix
within which procedure turn is to be completed.
c.Altitude at which the procedure turn is to be
made.
d.Final approach course and altitude.
e.Missed approach procedures if considered
necessary.
PHRASEOLOGY −
INITIAL APPROACH AT (altitude), PROCEDURE TURN
AT (altitude), (number) MINUTES/MILES (direction),
FINAL APPROACH ON (name of NAVAID) (specified)COURSE/RADIAL/AZIMUTH AT (altitude).
f.Applicable notations on instrument approach
charts which levy on the pilot the responsibility to
comply with or act on an instruction; for example,
“Straight-in minima not authorized at night,”
“Procedure not authorized when glideslope/glidepath
not used,” “Use of procedure limited to aircraft
authorized to use airport,” “Procedure not authorized
at night,” or a Snowflake icon indicating mandatory
cold temperature compensation.
REFERENCE −
AIM, Paragraph 5-1-17, Cold Temperature Operations
AIM, Paragraph 5-5-4, Instrument Approach
AIM, Paragraph 5-5-5, Missed Approach
4−8−11. PRACTICE APPROACHES
Except for military aircraft operating at military
airfields, ensure that neither VFR nor IFR practice
approaches disrupt the flow of other arriving anddeparting IFR or VFR aircraft. Authorize, withdraw
authorization, or refuse to authorize practice
approaches as traffic conditions require. Normally,approaches in progress should not be terminated.
NOTE−
The priority afforded other aircraft over practiceinstrument approaches is not intended to be so rigidly
applied that it causes grossly inefficient application of
services.
a.Separation.
1.IFR aircraft practicing instrument ap-
proaches must be afforded approved separation inaccordance with Chapter 3, Chapter 4, Chapter 5,
Chapter 6, and Chapter 7 minima until:
(a)The aircraft lands, and the flight is
terminated, or
(b)The pilot cancels the flight plan.
2.Where procedures require application of IFR
separation to VFR aircraft practicing instrument
approaches, IFR separation in accordance with
Chapter 3, Chapter 4, Chapter 5, Chapter 6, and
Chapter 7 must be provided. Controller responsibility
for separation begins at the point where the approach
clearance becomes effective. Except for super or
heavy aircraft, 500 feet vertical separation may be
applied between VFR aircraft and between a VFRand an IFR aircraft.
REFERENCE −
FAAO JO 7210.3, Para 6 −4−4, Practice Instrument Approaches.
FAAO JO 7210.3, Para 10 −4−5, Practice In strument Appr oaches.
3.Where separation services are not provided to
VFR aircraft practicing instrument approaches, the
controller must;
(a)Instruct the pilot to maintain VFR.
(b)Advise the pilot that separation services
are not provided.
PHRASEOLOGY −
“(Aircraft identification) MAINTAIN VFR, PRACTICE
APPROACH APPROVED, NO SEP ARATION SERVICES
PROVIDED.”
(c)Provide traffic information or advise the
pilot to contact the appropriate facility.
4.If an altitude is assigned, including at or
above/below altitudes, the altitude specified must
meet MV A, minimum safe altitude, or minimum IFR
altitude criteria.
REFERENCE −
F AAO JO 7110.65, Para 7 −7−5, Altitude Assignments.
5.All VFR aircraft must be instructed to
maintain VFR on initial contact or as soon as possible
thereafter.
NOTE−
This advisory is intended to remind the pilot that eventhough ATC is pr oviding IFR-type instructions, the pilot is
responsible for compliance with the applicable parts of the
CFR governing VFR flight.
b.Missed Approaches.
1.Unless alternate instructions have been
issued, IFR aircraft are automatically authorized to3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
4−8−9 Approach Clearance Proceduresexecute the missed approach depicted for the
instrument approach being flown.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−9, Missed Approach.
2.VFR aircraft are not automatically authorized
to execute the missed approach procedure. This
authorization must be specifically requested by thepilot and approved by the controller. When a missed
approach has been approved, separation must be
provided throughout the missed approach.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
4−8−12. LOW APPROACH AND TOUCH-
AND-GO
Consider an aircraft cleared for a touch-and-go, low
approach, or practice approach as an arriving aircraft
until that aircraft touches down or crosses the landingthreshold; thereafter, consider the aircraft as a
departing aircraft. Before the aircraft begins its final
descent, issue the appropriate departure instructions
the pilot is to follow upon completion of the approach
(in accordance with para 4 −3−2, Departure
Clearances). Climb-out instructions must include a
specific heading or a route of flight and altitude,
except when the aircraft will maintain VFR andcontact the tower.
EXAMPLE −
“After completing low approach, climb and maintain sixthousand. Turn right, heading three six zero.”
“Maintain VFR, contact tower.”
(Issue other instructions as appropriate.)
NOTE−
Climb-out instructions may be omitted after the firstapproach if instructions remain the same.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−1−1 GeneralChapter 5. Radar
Section 1. General
5−1−1. PRESENTATION AND EQUIPMENT
PERFORMANCE
Provide radar service only if you are personally
satisfied that the radar presentation and equipment
performance is adequate for the service being
provided.
NOTE−
The provision of radar service is not limited to the distance
and altitude parameters obtained during the commission-
ing flight check.
5−1−2. ALIGNMENT ACCURACY CHECK
During relief briefing, or as soon as possible after
assuming responsibility for a control position, check
the operating equipment for alignment accuracy and
display acceptability. Recheck periodically through-
out the watch.
REFERENCE −
F AAO JO 7210.3, Chapter 3, Chapter 8, Chapter 9, Chapter 10, and
Chapter 11.
Comparable Military Directives.
TERMINAL
a.Check the alignment of the radar video display
by assuring that the video/digital map or overlay is
properly aligned with a permanent target of known
range and azimuth on the radar display. Wherepossible, check one permanent target per quadrant.
b.Accuracy of the radar video display must be
verified for digitized radar systems by using the
moving target indicator (MTI) reflectors, fixedlocation beacon transponders (Parrots), beacon
real−time quality control (RTQC) symbols or
calibration performance monitor equipment (CPME)
beacon targets.
REFERENCE −
FAAO JO 7210.3, Para 3 −8−1, Tolerance for Radar Fix Accuracy.EN ROUTE
c.Radar Data Processing (RDP) alignment
checking is accomplished by the operational program
as part of the certification procedures for system
startup and then on a real −time basis during
operational hours.
d.Ensure the situation display center and altitude
limits for the system are appropriate for the operating
position.
REFERENCE −
F AAO JO 7110.65, Para 5 −14−5, Selected Altitude Limits.
5−1−3. ATC SURVEILLANCE SOURCE USE
Use approved ATC Surveillance Sources.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−4, Beacon Range Accuracy.
F AAO JO 7110.65, Para 5 −2−15, Inoperative or Malfunctioning
Interrogator.
a.Secondary radar may be used as the sole display
source as follows:
1.In Class A airspace.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−16, Failed Transponder in Class A
Airspace.14 CFR Section 91.135, Operations in Class A Airspace.
2.Outside Class A airspace, or where mix of
Class A airspace/non −Class A airspace exists, only
when:
(a)Additional coverage is provided by
secondary radar beyond that of the primary radar, or
(b)The primary radar is temporarily unusable
or out of service. Advise pilots when these conditions
exist, or
PHRASEOLOGY −
PRIMARY RADAR UNAVAILABLE (describe location).RADAR SERVICES AVAILABLE ON TRANSPONDEREQUIPPED AIRCRAFT ONLY.
NOTE−
1.Advisory may be omitted when provided on ATIS and
pilot indicates having ATIS information.
2.This provision is to au thorize secondary radar only
operations where there is no primary radar available and
the condition is temporary.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−1−2 General(c)A secondary radar system is the only
source of radar data for the area of service. When the
system is used for separation, beacon range accuracy
is assured, as provided in para 5 −1−4, Beacon Range
Accuracy. TERMINAL. Advise pilots when these
conditions exist.
NOTE−
Advisory may be omitted when provided on ATIS or byother appropriate notice to pilots.
b.TERMINAL. Do not use secondary radar only
to conduct surveillance (ASR) final approachesunless an emergency exists and the pilot concurs.
c.All procedures and requirements relating to
ATC services using secondary radar targets apply to
ATC services provided to targets derived from
ADS-B and WAM.
NOTE−
Targets derived from ADS-B and/or WAM cannot be used
to provide 3NM separation in the EAS. 3NM targets are not
derived from ADS-B and/or WAM within the EAS.
REFERENCE −
JO 7110.65, Para4-1-2, Exceptions.
JO 7110.65, Para 4-4-2, Route Structure Transitions
JO 7110.65, Para 5-5-1, Application
JO 7110.65, Para 6-5-4, Minima Along Other Than Established
Airways or Routes
JO 7110.65, Chapter 6, Nonradar
JO 7110.65, Para 5-5-4, Minima
JO 7210.3 3-6-2 ATC Surveillance Source Use
5−1−4. BEACON RANGE ACCURACY
a.You may use beacon targets for separation
purposes if beacon range accuracy is verified by one
of the following methods:
NOTE−
1.The check for verification of beacon range accuracy
accomplished by correlation of beacon and primary radar
targets of the same aircraft is not a check of displayaccuracy. Therefore, it is not necessary that it be done using
the same display with which separation is being provided,
nor the same targets being separated.
2.Narrowband and Full Digital Automation Systems:
Technical operations personnel verify beacon range
accuracy for automated narrowband display equipment
and Full Digital Terminal Automation Systems. Con-sequently, further verification by the controller is
unnecessary.
1.Correlate beacon and primary targets of the
same aircraft (not necessarily the one being provided
separation) to assure that they coincide.2.When beacon and primary targets of the same
aircraft do not coincide, correlate them to assure that
any beacon displacement agrees with the specified
distance and direction for that particular radar
system.
3.Refer to beacon range monitoring equipment
where so installed.
b.If beacon range accuracy cannot be verified,
you may use beacon targets only for traffic
information.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−3, Radar Use.
5−1−5. ELECTRONIC ATTACK (EA)
ACTIVITY
a.Refer all EA activity requests to the appropriate
center supervisor.
REFERENCE −
F AAO JO 7610.4, Chapter 2, Section 7, Electronic Attack (EA) and
Testing Coordination.
NOTE−
EA activity can subsequently result in a request to apply
EA videos to the radar system which may necessitate the
decertification of the narrowband search radar. TheSystems Engineer should be consulted concerning theeffect of EA on the operational use of the narr owband radar
prior to approving/disapproving requests to conduct
EA activity.
b.When EA activity interferes with the opera-
tional use of radar:
1.EN ROUTE. Request the responsible mili-
tary unit or aircraft, if initial request was received
directly from pilot, to suspend the activity.
2.TERMINAL. Request suspension of the
activity through the ARTCC. If immediate cessation
of the activity is required, broadcast the requestdirectly to the EA aircraft on the emergency
frequency. Notify the ARTCC of direct broadcast as
soon as possible.
c.When previously suspended activity will no
longer interfere:
1.EN ROUTE. Inform the NORAD unit or
aircraft that it may be resumed.
2.TERMINAL. Inform the ARTCC or aircraft
that it may be resumed. Obtain approval from the
ARTCC prior to broadcasting a resume clearance
directly to the aircraft.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−1−3 Generald.In each stop request, include your facility name,
type of EA activity (chaff dispensing −
“stream”/“burst” or electronic jamming − “buzzer”),
radar band affected and, when feasible, expected
duration of suspension.
PHRASEOLOGY −
BIG PHOTO (identification, if known) (name)CENTER/TOWER/APPROACH CONTROL.
To stop EA activity :
STOP STREAM/BURST IN AREA (area name) (degree and
distance from facility),
or
STOP BUZZER ON (frequency band or channel).To resume EA activity :
RESUME STREAM/BURST,
or
RESUME BUZZER ON (frequency band or channel).
5−1−6. SERVICE LIMITATIONS
a.When radar mapping is not available, limit
radar services to:
1.Separating identified aircraft targets.
2.Vectoring aircraft to intercept a PAR final
approach course.
3.Providing radar service in areas that ensure no
confliction with traffic on airways, other ATC areas
of jurisdiction, restricted or prohibited areas, terrain,etc.
b.EN ROUTE. When the position symbol
associated with the data block falls more than onehistory behind the actual aircraft target or there is no
target symbol displayed, the Mode C information in
the data block must not be used for the purpose ofdetermining separation.
c.Report radar malfunctions immediately for
corrective action and for dispatch of a Notice to
Airmen. Advise adjacent ATC facilities whenappropriate.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−9, Reporting Essential Flight
Information.F AAO JO 7210.3, Chapter 3, Chapter 7, Chapter 10 Section 5, and
Chapter 11 Section 2.
5−1−7. ELECTRONIC CURSOR
TERMINAL
a.An electronic cursor may be used to aid in
identifying and vectoring an aircraft and to give finer
delineation to a video map. Do not use it as a
substitute for a video map or map overlay; e.g., to
form intersections, airway boundaries, final approach
courses, etc.
b.Fixed electronic cursors may be used to form
the final approach course for surveillance approaches
conducted by military operated mobile radarfacilities.
5−1−8. MERGING TARGET PROCEDURES
a.Except while they are established in a holding
pattern, apply merging target procedures to all radaridentified:
1.Aircraft at 10,000 feet and above.
2.Turbojet aircraft regardless of altitude.
REFERENCE −
P/CG Term − Turbojet Aircraft.
3.Presidential aircraft regardless of altitude.
b.Issue traffic information to those aircraft listed
in subpara a whose targets appear likely to merge
unless the aircraft are separated by more than the
appropriate vertical separation minima.
EXAMPLE −
“Traffic twelve o’clock, seven miles, eastbound, MD −80, at
one seven thousand.”
“United Sixteen and American Twenty-five, traffic
twelve o’clock, one zero miles, opposite direction,
eastbound seven twenty seven at flight level three three
zero, westbound MD −Eighty at flight level three one zero.”
c.When both aircraft in subpara b are in RVSM
airspace, and vertically separated by 1,000 feet, ifeither pi lot reports they are unable to maintain RVSM
due to turbulence or mountain wave, vector either
aircraft to avoid merging with the target of the otheraircraft.
EXAMPLE −
“Delta One Twenty Three, fly heading two niner zero,
vector for traffic. Traffic twelve o’clock, one zero miles,
opposite dir ection, MD −80 eastbound at flight level three
two zero.”5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−1−4 Generald.If the pilot requests, vector his/her aircraft to
avoid merging with the target of previously issued
traffic.
NOTE−
Aircraft closure rates are so rapid that when applying
merging target procedures, controller issuance of traffic
must be commenced in ample time for the pilot to decide if
a vector is necessary.
e.If unable to provide vector service, inform the
pilot.
NOTE−
The phraseology “Unable RVSM due turbulence (ormountain wave)” is only intended for severe turbulence or
other weather encounters with altitude deviations of
approximately 200 feet or more.
5−1−9. HOLDING PATTERN
SURVEILLANCE
Provide radar surveillance of outer fix holding pattern
airspace areas, or any portions thereof, shown on your
radar scope (displayed on the video map or scribed on
the map overlay) whenever aircraft are holding there.
Attempt to detect any aircraft that stray outside the
area. If you detect an aircraft straying outside the area,
assist it to return to the assigned airspace.
5−1−10. DEVIATION ADVISORIES
Inform an aircraft when it is observed in a position
and on a track which will obviously cause the aircraftto deviate from its protected airspace area. If
necessary, help the aircraft to return to the assigned
protected airspace.
NOTE−
1.RNAV ATS routes have a width of 8 miles and laterally
protected airspace of 4 miles on each side of the route
centerline
2.Navigation system performance requirements for
operations on RNAV ATS r outes r equire the air craft system
be capable of remaining within 2 miles of the route
centerline. Aircraft approaching this limit may beexperiencing a navigation system error or failure.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−5, Route or Altitude Amendments.
F AAO JO 7110.65, Para 7 −9−3, Methods.
F AAO 7400.2, Para 20-5-3. Lateral Protected Airspace Criteria forRNAV En Route Segments
AC90-100A, U.S. Terminal and En Route Area Navigation (RNAV)
Operations, Para 8a. Navigation System Accuracy5−1−11. RADAR FIX POSTING
EN ROUTE
A controller is required to manually record at least
once the observed or reported time over a fix for each
controlled aircraft in their sector of responsibilityonly when the flight progress recording components
of the EAS FDP are not operational.
REFERENCE −
FAAO JO 7210.3, Para 6 −1−6, Flight Pr ogress Strip Usage.
FAAO JO 7210.3, Para 10 −1−8, Flight Pr ogress Strip Usage.
5−1−12. POSITION REPORTING
If necessary, you may request an aircraft to provide an
estimate or report over a specific fix. After an aircraft
receives the statement “radar contact” from ATC, itdiscontinues reporting over compulsory reporting
points. It resumes normal position reporting when
ATC informs it “radar contact lost” or “radar serviceterminated.”
REFERENCE −
P/CG Term − Radar Contact.
a.When required, inform an aircraft of its position
with respect to a fix or airway.
PHRASEOLOGY −
OVER/P ASSING (fix).
(Number of miles) MILES FROM (fix).
(Number of miles) MILES (direction) OF (fix, airway, or
location).
CROSSING/JOINING/DEP ARTING (airway or route).
INTERCEPTING/CROSSING (name of NAVAID)
(specified) RADIAL.
5−1−13. RADAR SERVICE TERMINATION
a.Inform aircraft when radar service is
terminated.
PHRASEOLOGY −
RADAR SERVICE TERMINAT ED (nonradar routing if
required).
b.Radar service is automatically terminated and
the aircraft needs not be advised of termination when:
NOTE−
1.Termination of radar monitoring when conducting
simultaneous ILS approaches is pr escribed in Para 5 −9−7,
Simultaneous Independent Appr oaches− Dual & T riple.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−1−5 General2.Termination of radar monitoring where P AR equipment
is used to monitor approaches is prescribed inpara 5−13−3, Monitor Information.
1.An aircraft cancels its IFR flight plan, except
within Class B airspace, Class C airspace, TRSA, or
where basic radar service is provided.
2.An aircraft conducting an instrument, visual,
or contact approach has landed or has been instructedto change to advisory frequency.
3.At tower-controlled airports where radar
coverage does not exist to within
1/2 mile of the end
of the runway, arriving aircraft must be informedwhen radar service is terminated.REFERENCE −
FAAO JO 7210.3, Para 10 −5−6, Radar Tolerances.
4.TERMINAL. An arriving VFR aircraft re-
ceiving radar service to a tower-controlled airportwithin Class B airspace, Class C airspace, TRSA, or
where basic radar service is provided has landed, or
to all other airports, is instructed to change to toweror advisory frequency.
5.TERMINAL. An aircraft completes a radar
approach.
REFERENCE −
F AAO JO 7110.65, Para 7 −6−12, Service Provided When Tower is
Inoperative.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−2−1 Beacon SystemsSection 2. Beacon Systems
5−2−1. ASSIGNMENT CRITERIA
a.General.
1.Mode 3/A is designated as the common
military/civil mode for air traffic control use.
2.Make radar beacon code assignments to only
Mode 3/A transponder-equipped aircraft.
b.Unless otherwise specified in a directive or a
letter of agreement, make code assignments todeparting, en route, and arrival aircraft in accordance
with the procedures specified in this section for the
radar beacon code environment in which you are
providing ATC service. Give first preference to the
use of discrete beacon codes.
PHRASEOLOGY −
SQUAWK THREE/ALF A (code),
or
SQUAWK (code).
NOTE−
A code environment is determined by an operatingposition’ s/sector’ s equipment capability to decode radar
beacon targets using either the first and second or all
four digits of a beacon code.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3, Beacon Identification Methods.
5−2−2. DISCRETE ENVIRONMENT
a.Issue discrete beacon codes assigned by the
computer. Computer-assigned codes may be modi-
fied as required.
1.TERMINAL. Aircraft that will remain within
the terminal facility’s delegated airspace must be
assigned a code from the code subset allocated to the
terminal facility.
2.TERMINAL. Unless otherwise specified in a
facility directive or a letter of agreement, aircraft that
will enter an adjacent ATTS facility’s delegated
airspace must be assigned a beacon code assigned by
the ARTCC computer.
NOTE−
1.This will provide the adjacent facility advance
information on the air craft and will cause auto-acquisition
of the aircraft prior to handoff.2.When an IFR aircraft, or a VFR aircraft that has been
assigned a beacon code by the ARTCC computer and
whose flight plan will terminate in another facility’ s area,
cancels ATC service or does not activate the flight plan,
ensure that appropriate action is taken to remove strips (RS
message) on that aircraft.
b.Make handoffs to other positions/sectors on the
computer-assigned code.
c.Coastal facilities accepting “over” traffic that
will subsequently be handed-off to an oceanic
ARTCC must reassign a new discrete beacon code to
an aircraft when it first enters the receiving facility’sairspace. The code reassignment must be accom-
plished by inputting an appropriate message into the
computer and issued to the pilot while operating in the
first sector/position in the receiving facility’s
airspace.
NOTE−
Per an agreement between F AA and the Department ofDefense, 17 Code subsets in the NBCAP have been
reserved for exclusive military use outside NBCAP
airspace. To maximize the use of these subsets, they havebeen allocated to ARTCC’ s underlying NBCAP airspacethat do not abut an oceanic ARTCC’ s area. To preclude apotential situation where two aircraft might be in the same
airspace at the same time on the same discrete code, it is
necessary to r eassign an aircraft another code as specified
in subpara c.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−4, Mixed Environment.
F AAO JO 7110.65, Para 5 −2−9, VFR Code Assignments.
F AAO JO 7110.65, Para 5 −3−3, Beacon Identification Methods.
5−2−3. NONDISCRETE ENVIRONMENT
a.Assign appropriate nondiscrete beacon codes
from the function codes specified in para 5 −2−6,
Function Code Assignments.
b.Unless otherwise coordinated at the time of
handoff, make handoffs to other positions/sectors onan appropriate nondiscrete function code.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−4, Mixed Environment.
F AAO JO 7110.65, Para 5 −2−9, VFR Code Assignments.
F AAO JO 7110.65, Para 5 −3−3, Beacon Identification Methods.
5−2−4. MIXED ENVIRONMENT
a.When discrete beacon code capability does not
exist in your area of responsibility, comply with the
JO 7110.65W 12/10/15
5−2−2 Beacon Systemsprocedures specified in para 5 −2−3, Nondiscrete
Environment.
NOTE−
In a mixed code environment, a situation may exist wherea discrete-equipped position/sector exchanges control of
aircraft with nondiscrete-equipped facilities or vice versa.
b.When discrete beacon code capability exists in
your area of responsibility:
1.Comply with the procedures specified in
para 5−2−2, Discrete Environment, and
2.Unless otherwise coordinated at the time of
handoff, assign aircraft that will enter the area of
responsibility of a nondiscrete-equipped position/sector an appropriate nondiscrete function code from
the codes specified in para 5 −2−6, Function Code
Assignments, prior to initiating a handoff.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−8, IFR-VFR and VFR-IFR Flights.
F AAO JO 7110.65, Para 5 −2−9, VFR Code Assignments.
F AAO JO 7110.65, Para 5 −3−3, Beacon Identification Methods.
5−2−5. RADAR BEACON CODE CHANGES
Unless otherwise specified in a directive or a letter of
agreement or coordinated at the time of handoff, do
not request an aircraft to change from the code it was
squawking in the transferring facility’s area until the
aircraft is within your area of responsibility.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−8, IFR-VFR and VFR-IFR Flights.
F AAO JO 7110.65, Para 5 −3−3, Beacon Identification Methods.
5−2−6. FUNCTION CODE ASSIGNMENTS
Unless otherwise specified by a directive or a letter of
agreement, make nondiscrete code assignments from
the following categories:
a.Assign codes to departing IFR aircraft as
follows:
1. Code 2000 to an aircraft which will climb to
FL 240 or above or to an aircraft which will climb toFL 180 or above where the base of Class A airspace
and the base of the operating sector are at FL 180, and
for inter-facility handoff the receiving sector is alsostratified at FL 180. The en route code must not be
assigned until the aircraft is established in the high
altitude sector.
2. Code 1100 to an aircraft which will remain
below FL 240 or below FL 180 as above.3.For handoffs from terminal facilities when so
specified in a letter of agreement as follows:
(a)Within NBCAP airspace − Code 0100 to
Code 0400 inclusive or any other code authorized by
the appropriate service area office.
(b)Outside NBCAP airspace − Code 1000 or
one of the codes from 0100 to 0700 inclusive or any
other code authorized by the appropriate service area
office.
b.Assign codes to en route IFR aircraft as follows:
NOTE−
1.FL 180 may be used in lieu of FL 240 where the base of
Class A airspace and the base of the operating sector are
at FL 180, and for inter-facility handoff the receiving
sector is also stratified at FL 180.
2.The provisions of subparas b2(b) and (c) may be
modified by facility directive or letter of agreement whenoperational complexities or simplified sectorizationindicate. Letters of agreement are mandatory when the
operating sectors of two facilities are not stratified at
identical levels. The general concept of utilizingCodes 2100 through 2500 within Class A airspace should
be adhered to.
1.Aircraft operating below FL 240 or when
control is transferred to a controller whose areaincludes the stratum involved.
(a) Code 1000 may be assigned to aircraft
changing altitudes.
(b) Code 1100 to an aircraft operating at an
assigned altitude below FL 240. Should an additional
code be operationally desirable, Code 1300 must be
assigned.
2.Aircraft operating at or above FL 240 or when
control is transferred to a controller whose areaincludes the stratum involved.
(a) Code 2300 may be assigned to aircraft
changing altitudes.
(b) Code 2100 to an aircraft operating at an
assigned altitude from FL 240 to FL 330 inclusive.
Should an additional code be operationally desirable,
Code 2200 must be assigned.
(c) Code 2400 to an aircraft operating at an
assigned altitude from FL 350 to FL 600 inclusive.
Should an additional code be operationally desirable,
Code 2500 must be assigned.
3. Code 4000 when aircraft are operating on a
flight plan specifying frequent or rapid changes in
JO 7110.65W 12/10/15
5−2−3 Beacon Systemsassigned altitude in more than one stratum or other
conditions of flight not compatible with a stratified
code assignment.
NOTE−
1.Categories of flight that can be assigned Code 4000
include certain flight test aircraft, MTR missions, aerialrefueling operation requiring descent involving more than
one stratum, ALTRVs where continuous monitoring of ATC
communications facilities is not required and frequentaltitude changes are approved, and other aircraftoperating on flight plans requiring special handling byATC.
2.Military aircraft operating VFR or IFR in restricted/
warning areas or VFR on VR routes will adjust their
transponders to reply on Code 4000 unless another code
has been assigned by ATC or coordinated, if possible, with
ATC.
c.Assign the following codes to arriving IFR
aircraft, except military turbojet aircraft as specified
in para 4−7−4, Radio Frequency and Radar Beacon
Changes for Military Aircraft:
NOTE−
FL 180 may be used in lieu of FL 240 where the base ofClass A airspace and the base of the operating sector are
at FL 180, and for inter-facility handoff the receiving
sector is also stratified at FL 180.
1. Code 2300 may be assigned for descents
while above FL 240.
2. Code 1500 may be assigned for descents into
and while within the strata below FL 240, or with
prior coordination the specific code utilized by the
destination controller, or the code currently assigned
when descent clearance is issued.
3.The applicable en route code for the holding
altitude if holding is necessary before entering the
terminal area and the appropriate code in subparas 1or 2.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−8 , IFR-VFR and VFR-IFR Flights.
F AAO JO 7110.65, Para 5 −2−3 , Nondiscrete Environment.
F AAO JO 7110.65, Para 5 −2−4 , Mixed Environment.
F AAO JO 7110.65, Para 5 −2−9 , VFR Code Assignments.
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−7. EMERGENCY CODE ASSIGNMENT
Assign codes to emergency aircraft as follows:
a. Code 7700 when the pilot declares an
emergency and the aircraft is not radar identified.PHRASEOLOGY −
SQUAWK MAYDAY ON 7700.
b.After radio and radar contact have been
established, you may request other than single-piloted helicopters and single-piloted turbojet aircraft
to change from Code 7700 to another code
appropriate for your radar beacon code environment.
NOTE−
1.The code change, based on pilot concurrence, the
nature of the emergency, and current flight conditions will
signify to other radar facilities that the aircraft in distressis identified and under ATC control.
2.Pilots of single-piloted helicopters and single-piloted
turbojet aircraft may be unable to reposition transponder
controls during the emergency.
PHRASEOLOGY −
RADAR CONTACT (position). IF FEASIBLE, SQUAWK
(code).
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
c.The following must be accomplished on a
Mode C equipped VFR aircraft which is inemergency but no longer requires the assignment of
Code 7700 :
1.TERMINAL. Assign a beacon code that will
permit terminal minimum safe altitude warning
(MSAW) alarm processing.
2.EN ROUTE. An appropriate keyboard entry
must be made to ensure en route MSAW (EMSAW)
alarm processing.
5−2−8. RADIO FAILURE
When you observe a Code 7600 display, apply the
procedures in para 10−4−4, Communications Failure.
NOTE−
Should a transponder-equipped aircraft experience a lossof two-way radio communications capability, the pilot canbe expected to adjust his/her transponder to Code 7600 .
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−9. VFR CODE ASSIGNMENTS
a.For VFR aircraft receiving radar advisories,
assign an appropriate function code or computer-
assigned code for the code environment in which you
are providing service.
JO 7110.65W 12/10/15
5−2−4 Beacon SystemsNOTE−
1.Para 5−2−2 , Discrete Environment; para 5 −2−3 ,
Nondiscrete Environment, and para 5 −2−4 , Mixed
Environment, specify code assignment procedures to
follow for the three code environments.
2.Para 5−2−6 , Function Code Assignments, specifies the
function code allocation from which an appropriate code
for the aircraft indicated in subpara a should be selected.In the terminal envir onment, additional function codes may
be authorized by the appropriate service area office.
1.If the aircraft is outside of your area of
responsibility and an operational benefit will be
gained by retaining the aircraft on your frequency for
the purpose of providing services, ensure that
coordination has been effected:
(a)As soon as possible after positive
identification, and
(b)Prior to issuing a control instruction or
providing a service other than a safety alert/trafficadvisory.
NOTE−
Safety alerts/traffic advisories may be issued to an air craft
prior to coordination if an imminent situation may beaverted by such action. Coor dination should be effected as
soon as possible thereafter.
b.Instruct IFR aircraft which cancel an IFR flight
plan and are not requesting radar advisory service and
VFR aircraft for which radar advisory service is being
terminated to squawk the VFR code.
PHRASEOLOGY −
SQUAWK VFR.
or
SQUAWK 1200.
NOTE−
1.Aircraft not in contact with an ATC facility may squawk
1255 in lieu of 1200 while en route to/from or within thedesignated fire fighting area(s).
2.VFR aircraft which fly authorized SAR missions for the
USAF or USCG may be advised to squawk 1277 in lieu of
1200 while en r oute to/from or within the designated search
area.
3.Gliders not in contact with an ATC facility should
squawk 1202 in lieu of 1200. Gliders operate under some
flight and maneuvering limitations. They may go from
essentially stationary targets while climbing and thermal-
ing to moving targets very quickly. They can be expected to
make radical changes in flight direction to find lift and
cannot hold altitude in a response to an ATC request.Gliders may congregate together for short periods of time
to climb together in thermals and may cruise together inloose formations while traveling between thermals.
REFERENCE −
F AAO 7110.66, National Beacon Code Allocation Plan.
c.When an aircraft changes from VFR to IFR, the
controller must assign a beacon code to Mode C
equipped aircraft that will allow MSAW alarms.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−10. BEACON CODE FOR PRESSURE
SUIT FLIGHTS AND FLIGHTS ABOVEFL 600
a.Mode 3/A, Code 4400 , and discrete Codes
4440 through 4465 are reserved for use by R −71,
F−12, U−2, B−57, pressure suit flights, and aircraft
operations above FL 600.
NOTE−
The specific allocation of the special use codes insubset 4400 is in F AAO 7110.66, National Beacon CodeAllocation Plan.
b.Ensure that aircraft remain on Code 4400 or one
of the special use discrete codes in the 4400 subset if
filed as part of the flight plan. Except when
unforeseen events, such as weather deviations,equipment failure, etc., cause more than one aircraft
with same Mode 3/A discrete beacon codes to be in
the same or adjacent ARTCC’s airspace at the sametime, a controller may request the pilot to make a code
change, squawk standby, or to stop squawk as
appropriate.
NOTE−
Due to the inaccessibility of certain equipment to the flight
crews, Code 4400 or a discrete code from the 4400 subset
is preset on the ground and will be used throughout theflight profile including operations below FL 600.Controllers should be cognizant that not all aircraft may be
able to accept the transponder changes identified in the
exception. Emergency Code 7700, however, can be
activated.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−11. AIR DEFENSE EXERCISE BEACON
CODE ASSIGNMENT
EN ROUTE
Ensure exercise FAKER aircraft remain on the
exercise flight plan filed discrete beacon code.
NOTE−
1.NORAD will ensure exercise F AKER aircraft flight
JO 7110.65W 12/10/15
5−2−5 Beacon Systemsplans are filed containing discrete beacon codes from the
Department of Defense code allocation specified in F AAOrder JO 7610.4, Special Operations, Appendix 6.
2.NORAD will ensure that those F AKER air craft assigned
the same discrete beacon code are not flight planned in the
same or any adjacent ARTCC’ s airspace at the same time.
(Simultaneous assignment of codes will only occur when
operational requirements necessitate.)
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−12. STANDBY OR LOW SENSITIVITY
OPERATION
You may instruct an aircraft operating on an assigned
code to change transponder to “standby” or “lowsensitivity” position:
NOTE−
National standards no longer require improved transpon-
der to be equipped with the low sensitivity feature.
Therefore, aircraft with late model transponders will beunable to respond to a request to “squawk low.”
a.When approximately 15 miles from its
destination and you no longer desire operation of the
transponder.
b.When necessary to reduce clutter in a
multi-target area, or to reduce “ring-around” or other
phenomena, provided you instruct the aircraft to
return to “normal sensitivity” position as soon as
possible thereafter.
PHRASEOLOGY −
SQUAWK STANDBY,
or
SQUAWK LOW/NORMAL.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−13. CODE MONITOR
Continuously monitor the Mode 3/A radar beacon
codes assigned for use by aircraft operating within
your area of responsibility when nonautomatedbeacon decoding equipment (e.g., 10 −channel
decoder) is used to display the target symbol.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−6 , Function Code Assignments.
NOTE−
In addition to alphanumeric and control symbologyprocessing enhancements, the MEARTS and STARSsystems are equipped with automatic beacon decoders.Therefore, in facilities where the automatic beacondecoders are providing the control slash video, there is no
requirement to have the non −automated decoding
equipment operating simultaneously.
REFERENCE −
F AAO JO 7210.3, Para 3 −7−4, Monitoring of Mode 3/A Radar Beacon
Codes.
a.This includes the appropriate IFR code actually
assigned and, additionally, Code 1200 , Code 1202,
Code 1255 , and Code 1277 unless your area of
responsibility includes only Class A airspace. During
periods when ring-around or excessive VFR target
presentations derogate the separation of IFR traffic,
the monitoring of VFR Code 1200 , Code 1202, Code
1255 , and Code 1277 may be temporarily discontin-
ued.
b.Positions of operation which contain a
restricted or warning area or VR route within orimmediately adjacent to their area of jurisdiction
must monitor Code 4000 and any other code used in
lieu of 4000 within the warning/restricted area or
VR route. If by local coordination with the
restricted/warning area or VR route user a code other
than 4000 is to be exclusively used, then this codemust be monitored.
c.If a normally assigned beacon code disappears,
check for a response on the following codes in the
order listed and take appropriate action:
NOTE−
When Codes 7500 and/or 7600 have been preselected, it
will be necessary for the ID −SEL−OFF switches for these
codes to be left in the off position so that beacon tar get for
an aircraft changing to one of these codes will disappear,
thereby alerting the controller to make the check. This
check will not be required if automatic alerting capabilityexists.
1. Code 7500 (hijack code).
REFERENCE −
F AAO JO 7110.65, Para 10 −2−6 , Hijacked Aircraft.
2. Code 7600 (loss of radio communications
code).
5−2−14. FAILURE TO DISPLAY ASSIGNED
BEACON CODE OR INOPERATIVE/MALFUNCTIONING TRANSPONDER
a.Inform an aircraft with an operable transponder
that the assigned beacon code is not being displayed.
PHRASEOLOGY −
(Identification) RESET TRANSPONDER, SQUAWK(appropriate code).
JO 7110.65W 12/10/15
5−2−6 Beacon Systemsb.Inform an aircraft when its transponder appears
to be inoperative or malfunctioning.
PHRASEOLOGY −
(Identification) YOUR TRANSPONDER APPEARS
INOPERATIVE/MALFUNCTIONING, RESET, SQUAWK
(appropriate code).
c.Ensure that the subsequent control position in
the facility or the next facility, as applicable, is
notified when an aircraft transponder is malfunction-
ing/inoperative.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−15. INOPERATIVE OR
MALFUNCTIONING INTERROGATOR
Inform aircraft concerned when the ground interro-
gator appears to be inoperative or malfunctioning.
PHRASEOLOGY −
(Name of facility or control function) BEACONINTERROGATOR INOPERATIVE/MALFUNCTIONING.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−3 , Radar Use.
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−16. FAILED TRANSPONDER IN CLASS
A AIRSPACE
Disapprove a request or withdraw previously issued
approval to operate in Class A airspace with a failedtransponder solely on the basis of traffic conditions or
other operational factors.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−3 , Radar Use.
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−17. VALIDATION OF MODE C
READOUT
Ensure that Mode C altitude readouts are valid after
accepting an interfacility handoff, initial track start,
track start from coast/suspend tabular list, missing, or
unreasonable Mode C readouts. When an X is
displayed adjacent to the Mode C, the Mode C
altitude readout must be validated after the X is no
longer displayed in the data block. (CTRD equipped
tower cabs are not required to validate Mode C
readouts after receiving interfacility handoffs from
TRACONs according to the procedures in Para 5-4-3,
Methods, subpara a4.)
a.Consider an altitude readout valid when:1.It varies less than 300 feet from the pilot
reported altitude, or
PHRASEOLOGY −
(If aircraft is known to be operating below the lowestuseable flight level),
SAY ALTITUDE.
or
(If aircraft is known to be operating at or above the lowest
useable flight level),
SAY FLIGHT LEVEL.
2.You receive a continuous readout from an
aircraft on the airport and the readout varies by less
than 300 feet from the field elevation, or
NOTE−
A continuous readout exists only when the altitude filterlimits are set to include the field elevation.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−23 , Altitude Filters.
F AAO JO 7110.65, Para 5 −14−5 , Selected Altitude Limits.
F AAO JO 7210.3, Para 11 −2−3 , Display Data.
3.You have correlated the altitude information
in your data block with the validated information ina data block generated in another facility (by verbally
coordinating with the other controller) and your
readout is exactly the same as the readout in the other
data block.
b.When unable to validate the readout, do not use
the Mode C altitude information for separation.
c.Whenever you observe an invalid Mode C
readout below FL 180:
1.Issue the correct altimeter setting and confirm
the pilot has accurately reported the altitude.
PHRASEOLOGY −
(Location) ALTIMETER (appropriate altimeter), VERIFY
ALTITUDE.
2.If the altitude readout continues to be invalid:
(a)Instruct the pilot to turn off the altitude-
reporting part of his/her transponder and include the
reason; and
(b)Notify the operations supervisor-in-
charge of the aircraft call sign.
PHRASEOLOGY −
STOP ALTITUDE SQUAWK. ALTITUDE DIFFERS BY(number of feet) FEET.
JO 7110.65W 12/10/15
5−2−7 Beacon Systemsd.Whenever you observe an invalid Mode C
readout at or above FL 180, unless the aircraft is
descending below Class A airspace:
1.Verify that the pilot is using 29.92 inches of
mercury as the altimeter setting and has accuratelyreported the altitude.
PHRASEOLOGY −
VERIFY USING TWO NINER NINER TWO AS YOURALTIMETER SETTING.
(If aircraft is known to be operating at or above the lowest
useable flight level),
VERIFY FLIGHT LEVEL.
2.If the Mode C readout continues to be invalid:
(a)Instruct the pilot to turn off the altitude-
reporting part of his/her transponder and include the
reason; and
(b)Notify the operational supervisor-in-
charge of the aircraft call sign.
PHRASEOLOGY −
STOP ALTITUDE SQUAWK. ALTITUDE DIFFERS BY
(number of feet) FEET.
e.Whenever possible, inhibit altitude readouts on
all consoles when a malfunction of the ground
equipment causes repeated invalid readouts.
5−2−18. ALTITUDE CONFIRMATION −
MODE C
Request a pilot to confirm assigned altitude on initial
contact unless:
NOTE−
For the purpose of this paragraph, “initial contact” means
a pilot’ s first radio contact with each sector/position.
a.The pilot states the assigned altitude, or
b.You assign a new altitude to a climbing or a
descending aircraft, or
c.The Mode C readout is valid and indicates that
the aircraft is established at the assigned altitude, or
d.TERMINAL. The aircraft was transferred to
you from another sector/position within your facility
(intrafacility).
PHRASEOLOGY −
(In level flight situations),VERIFY AT (altitude/flight
level).(In climbing/descending situations),
(if aircraft has been assigned an altitude below the lowest
useable flight level),
VERIFY ASSIGNED ALTITUDE (altitude).
or
(If aircraft has been assigned a flight level at or above the
lowest useable flight level),
VERIFY ASSIGNED FLIGHT LEVEL (flight level).
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−19. ALTITUDE CONFIRMATION −
NON−MODE C
a.Request a pilot to confirm assigned altitude on
initial contact unless:
NOTE−
For the purpose of this paragraph, “initial contact” means
a pilot’ s first radio contact with each sector/position.
1.The pilot states the assigned altitude, or
2.You assign a new altitude to a climbing or a
descending aircraft, or
3.TERMINAL. The aircraft was transferred to
you from another sector/position within your facility(intrafacility).
PHRASEOLOGY −
(In level flight situations),VERIFY AT (altitude/flight
level).
(In climbing/descending situations),VERIFY ASSIGNED
ALTITUDE/FLIGHT LEVEL (altitude/flight level).
b. USA. Reconfirm all pilot altitude read backs.
PHRASEOLOGY −
(If the altitude read back is correct),
AFFIRMATIVE (altitude).
(If the altitude read back is not correct),
NEGATIVE. CLIMB/DESCEND AND MAINTAIN
(altitude),
or
NEGATIVE. MAINTAIN (altitude).
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
JO 7110.65W 12/10/15
5−2−8 Beacon Systems5−2−20. AUTOMATIC ALTITUDE
REPORTING
Inform an aircraft when you want it to turn on/off the
automatic altitude reporting feature of itstransponder.
PHRASEOLOGY −
SQUAWK ALTITUDE,
or
STOP ALTITUDE SQUAWK.
NOTE−
Controllers should be aware that not all aircraft have acapability to disengage the altitude squawk independently
from the beacon code squawk. On some aircraft both
functions are controlled by the same switch.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−17 , Validation of Mode C Readout.
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
P/CG Term − Automatic Altitude Report.
5−2−21. INFLIGHT DEVIATIONS FROM
TRANSPONDER/MODE C REQUIREMENTSBETWEEN 10,000 FEET AND 18,000 FEET
Apply the following procedures to requests to deviate
from the Mode C transponder requirement by aircraft
operating in the airspace of the 48 contiguous states
and the District of Columbia at and above 10,000 feetMSL and below 18,000 feet MSL, excluding the
airspace at and below 2,500 feet AGL.
NOTE−
1.14 CFR Section 91.215(b) provides, in part, that all U.S.
registered civil aircraft must be equipped with an operable,
coded radar beacon transponder when operating in thealtitude stratum listed above. Such transponders must have
a Mode 3/A 4096 code capability, replying to Mode 3/Ainterrogation with the code specified by ATC, or a Mode S
capability, replying to Mode 3/A interrogations with the
code specified by ATC. The aircraft must also be equipped
with automatic pressure altitude reporting equipmenthaving a Mode C capability that automatically replies toMode C interrogations by transmitting pressure altitude
information in 100 −foot incr ements.
2.The exception to 14 CFR Section 91.215 (b) is 14 CFR
Section 91.215(b)(5) which states: except balloons,gliders, and aircraft without engine −driven electrical
systems.
REFERENCE −
F AAO JO 7210.3, Chapter 19 , Temporary Flight Restrictions.a.Except in an emer gency, do not approve inflight
requests for authorization to deviate from 14 CFR
Section 91.215(b)(5)(i) requirements originated by
aircraft without transponder equipment installed.
b.Approve or disapprove other inflight deviation
requests, or withdraw approval previously issued to
such flights, solely on the basis of traffic conditions
and other operational factors.
c.Adhere to the following sequence of action
when an inflight VFR deviation request is receivedfrom an aircraft with an inoperative transponder or
Mode C, or is not Mode C equipped:
1.Suggest that the aircraft conduct its flight in
airspace unaffected by the CFRs.
2.Suggest that the aircraft file an IFR flight
plan.
3.Suggest that the aircraft provide a VFR route
of flight and maintain radio contact with ATC.
d.Do not approve an inflight deviation unless the
aircraft has filed an IFR flight plan or a VFR route of
flight is provided and radio contact with ATC is
maintained.
e.You may approve an inflight deviation request
which includes airspace outside your jurisdictionwithout the prior approval of the adjacent ATC
sector/facility providing a transponder/Mode C status
report is forwarded prior to control transfer.
f.Approve or disapprove inflight deviation
requests within a reasonable period of time or advise
when approval/disapproval can be expected.
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
5−2−22. BEACON TERMINATION
Inform an aircraft when you want it to turn off its
transponder.
PHRASEOLOGY −
STOP SQUAWK.
(For a military aircraft when you do not know if the military
service requires that it continue operating on anothermode),
STOP SQUAWK (mode in use).
REFERENCE −
F AAO JO 7110.65, Para 5 −3−3 , Beacon Identification Methods.
JO 7110.65W 12/10/15
5−2−9 Beacon Systems5−2−23. ALTITUDE FILTERS
TERMINAL
Set altitude filters to display Mode C altitude readouts
to encompass all altitudes within the controller’sjurisdiction. Set the upper limits no lower than
1,000 feet above the highest altitude for which the
controller is responsible. In those stratified positions,
set the lower limit to 1,000 feet or more below the
lowest altitude for which the controller is responsible.
When the position’s area of responsibility includesdown to an airport field elevation, the facility will
normally set the lower altitude filter limit to
encompass the field elevation so that provisions ofpara 2−1−6, Safety Alert, and para 5 −2−17, Valida-tion of Mode C Readout, subpara a2 may be applied.
Air traffic managers may authorize temporary
suspension of this requirement when target clutter is
excessive.
5−2−24. INOPERATIVE OR
MALFUNCTIONING ADS-B TRANSMITTER
TERMINAL
Inform an aircraft when the ADS-B transmitter
appears to be inoperative or malfunctioning.
PHRASEOLOGY −
(Aircraft ID) YOUR ADS-B TRANSMITTER APPEARSTO BE INOPERATIVE / MALFUCTIONING.
JO 7110.65W 12/10/15
5−3−1 Radar IdentificationSection 3. Radar Identification
5−3−1. APPLICATION
Before you provide radar service, establish and
maintain radar identification of the aircraft involved,
except as provided in Paragraph 5-5-1, Application,
subparagraphs b2, b3 and in Paragraph 8-5-5, Radar
Identification Application.
REFERENCE −
F AAO JO 7110.65, Para 3-1-9, Use of Tower Radar Displays.
F AAO JO 7110.65, Para 5-1-1, Presentation and Equipment
Performance.
5−3−2. PRIMARY RADAR IDENTIFICATION
METHODS
Identify a primary or radar beacon target by using one
of the following methods:
a.Observing a departing aircraft target within
1 mile of the takeoff runway end at airports with an
operating control tower, provided one of the
following methods of coordination is accomplished.
1.A verbal rolling/boundary notification is
issued for each departure, or
2.A nonverbal rolling/boundary notification is
used for each departure aircraft.
NOTE−
Nonverbal notification can be accomplished via the use of
a manual or electronic “drop tube” or automation.
b.Observing a target whose position with respect
to a fix (displayed on the video map, scribed on the
map overlay, or displayed as a permanent echo) or a
visual reporting point (whose range and azimuth from
the radar antenna has been accurately determined and
made available to the controller) corresponds with a
direct position report received from an aircraft, andthe observed track is consistent with the reported
heading or route of flight. If a TACAN/VORTAC is
located within 6,000 feet of the radar antenna, theTACAN/VORTAC may be used as a reference fix for
radar identification without being displayed on the
video map or map overlay.
NOTE−
1.Establishment of radar identification through use of
DME position information can be complicated by the fact
that some military TACANs are not collocated withfrequency −paired VORs and might be separated from them
by as much as 31 miles.2.Visual reporting points used for RADAR identification
are limited to those most used by pilots and whose rangeand azimuth have been determined by supervisory
personnel.
c.Observing a target make an identifying turn or
turns of 30 degrees or more, provided the followingconditions are met:
NOTE−
Use of identifying turns or headings which would cause theaircraft to follow normal IFR routes or known VFR flightpaths might result in misidentification. When these
circumstances cannot be avoided, additional methods of
identification may be necessary.
1.Except in the case of a lost aircraft, a pilot
position report is received which assures you that the
aircraft is within radar coverage and within the areabeing displayed.
2.Only one aircraft is observed making these
turns.
3.For aircraft operating in accordance with an
IFR clearance, you either issue a heading away froman area which will require an increased minimum IFR
altitude or have the aircraft climb to the highest
minimum altitude in your area of jurisdiction beforeyou issue a heading.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−9, Use of Tower Radar Displays.
F AAO JO 7110.65, Para 5 −12−1 1, Surveillance Unusable.
5−3−3. BEACON IDENTIFICATION
METHODS
When using only Mode 3/A radar beacon to identify
a target, use one of the following methods:
a.Request the aircraft to activate the “IDENT”
feature of the transponder and then observe theidentification display.
NOTE−
1.At facilities where the single-slash “IDENT” modifica-
tion is installed or other decoder modifications have been
made which increase the number of “blooming” target
displays, it will be necessary to exer cise additional care to
preclude the possibility of misidentification.
2.TERMINAL. When automated displays are operated in
the analog mode, the “IDENT” return is displayed as a
double slash and the emergency return as a single bloomer
whenever the beacon control head is in the “fail” position.
JO 7110.65W 12/10/15
5−3−2 Radar IdentificationPHRASEOLOGY −
IDENT.SQUAWK (code) AND IDENT.
b.Request the aircraft to change to a specific
discrete or nondiscrete code, as appropriate, and then
observe the target or code display change. If a code
change is required in accordance with Section 2,Beacon Systems, of this chapter, use the codes
specified therein.
c.Request the aircraft to change transponder to
“standby.” After you observe the target disappear for
sufficient scans to assure that loss of target resulted
from placing the transponder in “standby” position,
request the aircraft to return transponder to normaloperation and then observe the reappearance of the
target.
PHRASEOLOGY −
SQUAWK STANDBY,
then
SQUAWK NORMAL.
d.EN ROUTE. An aircraft may be considered
identified when the full data block is automatically
associated with the beacon target symbol of an
aircraft that is squawking a discrete code assigned by
the computer.
NOTE−
Paired LDBs in ERAM do not display a beacon code.
PHRASEOLOGY −
SQUAWK (4 digit discrete code), AND IF YOURALTITUDE REPORTING EQUIPMENT IS TURNED
OFF , SQUAWK ALTITUDE.
NOTE−
The AIM informs pilots to adjust Mode C transponders withaltitude reporting capability activated unless deactivation
is requested by ATC. Squawk altitude is included to pr ovide
applicable phraseology.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−9, Use of Tower Radar Displays.
F AAO JO 7110.65, Para 5 −3−6, Position Information.
5−3−4. TERMINAL AUTOMATION SYSTEMS
IDENTIFICATION METHODS
TERMINAL
a.Consider an auto-acquired aircraft as identified
when the data block is displayed and is visible to you,
and one of the following conditions exist:1.The radar or beacon identification procedures
have been used to confirm the identity of the tagged
target.
2.The aircraft is being handed off using a NAS
automated system and one of the following does notappear in the data block: “CST”, “NAT”, “NT”,
“AMB”, “OLD”, “NB”, “TU”, “AM”, “OL”, or
“TRK”.
b.Use the data block to maintain target identity
unless it is in a coast status or displaced from theappropriate target.
c.A displaced data block must be updated at all
times.
REFERENCE −
F AAO JO 7110.65, Para 3 −1−9, Use of Tower Radar Displays.
5−3−5. QUESTIONABLE IDENTIFICATION
a.Use more than one method of identification
when proximity of targets, duplication of observed
action, or any other circumstances cause doubt as totarget identification.
b.If identification is questionable for any reason,
take immediate action to reidentify the aircraft or
terminate radar service. Identify the aircraft as
follows:
1.As described in para 5 −3−2, Primary Radar
Identification Methods, or para 5 −3−3, Beacon
Identification Methods.
2.En route. Ensure that all primary targets are
displayed when radar identification is lost or isquestionable.
REFERENCE −
F AAO JO 7110.65, Para 5 −4−3, Methods.
5−3−6. POSITION INFORMATION
Inform an aircraft of its position whenever radar
identification is established by means of identifyingturns or by any of the beacon identification methods
outlined in para 5 −3−3, Beacon Identification
Methods. Position information need not be given
when identification is established by position
correlation or when a departing aircraft is identifiedwithin 1 mile of the takeoff runway end.
5−3−7. IDENTIFICATION STATUS
a.Inform an aircraft of radar contact when:
JO 7110.65W 12/10/15
5−3−3 Radar Identification1.Initial radar identification in the ATC system
is established.
2.Subsequent to loss of radar contact or
terminating radar service, radar identification isreestablished.
PHRASEOLOGY −
RADAR CONTACT (position if required).
b.Inform an aircraft when radar contact is lost.
PHRASEOLOGY −
RADAR CONTACT LOST (alternative instructions whenrequired).
5−3−8. TARGET MARKERS
EN ROUTE
Retain data blocks that are associated with the
appropriate target symbol in order to maintain
continuous identity of aircraft. Retain the data block
until the aircraft has exited the sector or delegatedairspace, and all potential conflicts have been
resolved; including an aircraft that is a point out. The
data block must display flight identification andaltitude information, as a minimum. The displayed
altitude may be assigned, interim, or reported.
ERAM: When you have separation responsibility for
an aircraft and a paired track exists, display a full data
block (FDB).5−3−9. TARGET MARKERS
TERMINAL
a.Retain data blocks that are associated with the
appropriate target symbol in order to maintain
continuous identity of aircraft. Retain the data block
until the aircraft has exited the sector or delegated
airspace, and all potential conflicts have beenresolved; including an aircraft that is a point out. The
data block must display flight identification and
altitude information, as a minimum.
NOTE−
Where delegated airspace extends beyond Class B and/orClass C airspace, the following will apply: If a VFR
aircraft is clear of Class B and Class C airspace and radar
services have been terminated then retention of the datablock is no longer required.
b.During prearranged coordination procedures,
the controllers who penetrate another controller’s
airspace must display data block information of thatcontroller’s aircraft which must contain, at a
minimum, the position symbol and altitude
information.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−14, Coordinate Use of Airspace.
F AAO JO 7110.65, Para 5 −4−3, Methods.
F AAO JO 7110.65, Para 5 −4−8, Automated Information Transfer
(AIT).
F AAO JO 7110.65, Para 5 −4−10, Prearranged Coordination.
FAAO JO 7210.3, Para 3 −7−7, Prearranged Coordination.
JO 7110.65W 12/10/15
5−4−1 Transfer of Radar IdentificationSection 4. Transfer of Radar Identification
5−4−1. APPLICATION
To provide continuous radar service to an aircraft and
facilitate a safe, orderly, and expeditious flow of
traffic, it is often necessary to transfer radaridentification of an aircraft from one controller to
another. This section describes the terms, methods,
and responsibilities associated with this task.Interfacility and intrafacility transfers of radar
identification must be accomplished in all areas of
radar surveillance except where it is not operationally
feasible. Where such constraints exist, they must be:
a.Covered in letters of agreement which clearly
state that control will not be based upon a radarhandoff, or
b.Coordinated by the transferring and receiving
controllers for a specified period of time.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−8, Coordination with Receiving Facility.
5−4−2. TERMS
a.Handoff. An action taken to transfer the radar
identification of an aircraft from one controller to
another controller if the aircraft will enter the
receiving controller’s airspace and radio communica-
tions with the aircraft will be transferred.
b.Radar Contact. The term used to inform the
controller initiating a handoff that the aircraft isidentified and approval is granted for the aircraft to
enter the receiving controller’s airspace.
c.Point Out. An action taken by a controller to
transfer the radar identification of an aircraft to
another controller and radio communications will not
be transferred.
d.Point Out Approved. The term used to inform
the controller initiating a point out that the aircraft is
identified and that approval is granted for the aircraft
to enter the receiving controller’s airspace, as
coordinated, without a communications transfer or
the appropriate automated system response.
e.Traffic. A term used to transfer radar
identification of an aircraft to another controller for
the purpose of coordinating separation action. Trafficis normally issued:1.In response to a handoff or point out;
2.In anticipation of a handoff or point out; or
3.In conjunction with a request for control of an
aircraft.
f.Traffic Observed. The term used to inform the
controller issuing the traffic restrictions that thetraffic is identified an d that the restrictions issued are
understood and will be complied with.
5−4−3. METHODS
a.Transfer the radar identification of an aircraft by
at least one of the following methods:
1.Physically point to the target on the receiving
controller’s display.
2.Use landline voice communications.
3.Use automation capabilities.
NOTE−
Automated handoff capabilities are only available when
FDP is operational.
4.TERMINAL. Use the “Modify” or “Quick
Look” functions for data transfer between theTRACON and tower cab only if specific procedures
are established in a facility directive. The local
controller has the responsibility to determine whether
or not conditions are adequate for the use of
ARTS/STARS data on the BRITE/DBRITE/TDW.
REFERENCE −
F AAO JO 7210.3, Para 11 −2−4, Use of Modify and Quick Look
Functions.
F AAO JO 7210.3, Para 11 −8−4, Use of Stars Quick Look Functions.
b.When making a handoff, point-out, or issuing
traffic restrictions, relay information to the receiving
controller in the following order:
1.The position of the target relative to a fix, map
symbol, or radar target known and displayed by both
the receiving and transferring controller. Mileage
from the reference point may be omitted when
relaying the position of a target if a full data block
associated with the target has been forced on the
receiving controller’s radar display.
EXAMPLE −
“Point out, Southwest of Richmond VOR . . ..”
2.The aircraft identification, as follows:
(a)The aircraft call sign, or
JO 7110.65W 12/10/15
5−4−2 Transfer of Radar Identification(b)The discrete beacon code of the aircraft
during interfacility point-outs only, if both the
receiving and the transferring controllers agree.
NOTE−
Acceptance of a point-out using the discrete beacon codeas the aircraft’ s identification constitutes agreement.
(c)EN ROUTE. The Computer Identification
Number (CID) during intra-facility point-outs.
EXAMPLE −
“Point Out, Southwest of Richmond VOR, C-I-D 123 …”
3.The assigned altitude, appropriate
restrictions, and information that the aircraft is
climbing or descending, if applicable, except wheninter/intrafacility directives ensure that the altitude
information will be known by the receiving
controller.
NOTE−
When physically pointing to the target, you do not have tostate the aircraft position.
4.Advise the receiving controller of pertinent
information not contained in the data block or
available flight data unless covered in an LOA or
facility directive. Pertinent information may include:
(a)Assigned heading.
(b)Speed/altitude restrictions.
(c)Observed track or deviation from the last
route clearance.
(d)Any other pertinent information.
PHRASEOLOGY −
HANDOFF/POINT-OUT/TRAFFIC (aircraft position)(aircraft ID),
or
(discrete beacon code point-out only) (altitude,
restrictions, and other pertinent information, if
applicable).
c.When receiving a handoff, point-out, or traffic
restrictions, respond to the transferring controller asfollows:
PHRASEOLOGY −
(Aircraft ID) (restrictions, if applicable) RADARCONTACT,
or
(aircraft ID or discrete be acon code) (restrictions, ifapplicable) POINT-OUT APPROVED,
or
TRAFFIC OBSERVED,
or
UNABLE (appropriate information, as required).
d.If any doubt as to target identification exists
after attempt ing confirmation in accordance with this
section, apply the provisions of para 5 −3−5,
Questionable Identification.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−17, Validation of Mode C Readout.
5−4−4. TRAFFIC
a.When using the term “traffic” for coordinating
separation, the controller issuing traffic must issue
appropriate restrictions.
b.The controller accepting the restrictions must
be responsible to ensure that approved separation is
maintained between the involved aircraft.
5−4−5. TRANSFERRING CONTROLLER
HANDOFF
The transferring controller must:
a.Complete a radar handoff prior to an aircraft’s
entering the airspace delegated to the receiving
controller.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−14, Coordinate Use of Airspace.
F AAO JO 7110.65, Para 2 −1−15, Control Transfer.
F AAO JO 7110.65, Para 5 −4−6, Receiving Controller Handoff.
b.Verbally obtain the receiving controller’s
approval prior to making any changes to an aircraft’s
flight path, altitude, speed, or data block information
while the handoff is being initiated or afteracceptance, unless otherwise specified by a LOA or
a facility directive.
c.Ensure that, prior to transferring
communications:
1.Potential violations of adjacent airspace and
potential conflicts between aircraft in their own area
of jurisdiction are resolved.
2.Coordination has been accomplished with all
controllers through whose area of jurisdiction the
aircraft will pass prior to entering the receiving3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−4−3 Transfer of Radar Identificationcontroller’s area of jurisdiction unless otherwise
specified by a LOA or a facility directive.
3.Restrictions issued to ensure separation are
passed to the receiving controller.
d.After transferring communications, continue to
comply with the requirements of subparas c1 and 2.
e.Comply with restrictions issued by the receiving
controller unless otherwise coordinated.
f.Comply with the provisions of para 2 −1−17,
Radio Communications Transfer, subparas a and b.
To the extent possible, transfer communicationswhen the transfer of ra dar identification has been
accepted.
NOTE−
Before the ARTS/STARS “modify/quick look” function isused to transfer radar identification, a facility directive
which specifies communication transfer points is r equired.
g.Advise the receiving controller of pertinent
information not contained in the data block or flight
progress strip unless covered in a LOA or facilitydirective. Pertinent information includes:
1.Assigned heading.
2.Air speed restrictions.
3.Altitude information issued.
4.Observed track or deviation from the last
route clearance.
5.The beacon code if different from that
normally used or previously coordinated.
6.Any other pertinent information.
h.Ensure that the data block is associated with the
appropriate target.
i.Initiate verbal coordination to verify the position
of primary or nondiscrete targets when using the
automated handoff functions except for intrafacilityhandoffs using single-sensor systems or multisensor
systems operating in a mosaic RDP mode.
j.Initiate verbal coordination before transferring
control of a track when “CST,” “FAIL,” “NONE,”
“NB,” “NX,” “IF,” “NT”, or “TRK” is displayed inthe data block.
k.Advise the receiving controller if radar
monitoring is required.l.Issue restrictions to the receiving controller
which are necessary to maintain separation from
other aircraft within your area of jurisdiction before
releasing control of the aircraft.
m.Consider the target being transferred as
identified on the receiving controller’s display when
the receiving controller acknowledges receiptverbally or has accepted an automated handoff.
n.Accomplish the necessary coordination with
any intervening controllers whose area of jurisdiction
is affected by the receiving controller’s delay in the
climb or the descent of an aircraft through the vertical
limits of your area of jurisdiction when the receiving
controller advises you of that delay before accepting
the transfer of radar identification unless otherwise
specified by a LOA or a facility directive.
5−4−6. RECEIVING CONTROLLER
HANDOFF
The receiving controller must:
a.Ensure that the tar get position corresponds with
the position given by the transferring controller orthat there is an appropriate association between an
automated data block and the target being transferred
before accepting a handoff.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−14, Coordinate Use of Airspace.
F AAO JO 7110.65, Para 2 −1−15, Control Transfer.
F AAO JO 7110.65, Para 5 −4−5, Transferring Controller Handoff.
b.Issue restrictions that are needed for the aircraft
to enter your sector safely before accepting the
handoff.
c.Comply with restrictions issued by the
transferring controller unless otherwise coordinated.
d.After accepting a handoff from another
controller, confirm the identity of primary target byadvising the aircraft of its position, and of a beacon
target by observing a code change, an “ident” reply,
or a “standby” squawk unless one of these was usedduring handoff. These provisions do not apply at
those towers and GCAs which have been delegated
the responsibility for providing radar separationwithin designated areas by the parent approach
control facility and the aircraft identification is
assured by sequencing or positioning prior to the
handoff.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−5, Approach Separation Responsibility.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−4−4 Transfer of Radar Identificatione.When using appropriate equipment, consider a
discrete beacon target’s identity to be confirmed
when:
1.The data block associated with the target
being handed off indicates the computer assigneddiscrete beacon code is being received, or
2.You observe the deletion of a discrete code
that was displayed in the data block, or
NOTE−
When the air craft generated discrete beacon code does not
match the computer assigned beacon code, the codegenerated will be displayed in the data block. When theaircraft changes to the assigned discrete code, the codedisappears from the data block. In this instance, the
observance of code removal from the data block satisfies
confirmation requirements.
3.You observe the numeric display of a discrete
code that an aircraft has been instructed to squawk or
reports squawking.
f.Take the identified action prior to accepting
control of a track when the following indicators are
displayed in the data block:
1.“AMB” and “AM”: advise the other facility
that a disparity exists between the position declared
by their computer and that declared by your
CARTS/PIDP/STARS system.
2.“NAT”, “NT,” or “TU”: advise the other
facility if a disparity exists between the position
declared by their computer and the actual target
position.
3.“DATA”, “CST”, “NONE”, “NX”, “OLD”,
or “OL”: initiate verbal coordination.
g.ERAM: Notify the FLM when a MISM is
displayed in the data block.
h.Advise the transferring controller, prior to
accepting the transfer of radar identification, that you
will delay the climb or the descent of an aircraftthrough the vertical limits of the transferring
controller’s area of jurisdiction, unless otherwise
specified in a LOA or a facility directive.
i.If you decide, after accepting the transfer of
radar identification, to delay the aircraft’s climb or
descent through the vertical limits of the transferring
controller’s area of jurisdiction, advise the
transferring controller of that decision as soon as
possible.5−4−7. POINT OUT
a.The transferring controller must:
1.Obtain verbal approval before permitting an
aircraft to enter the receiving controller’s delegated
airspace. TERMINAL. Automated approval may be
utilized in lieu of verbal, provided the appropriate
automation software is operational (automated point
out function), and the procedures are specified in afacility directive/LOA.
2.Obtain the receiving controller’s approval
before making any changes to an aircraft’s flight path,
altitude, speed, or data block information after the
point out has been approved.
3.Comply with restrictions issued by the
receiving controller unless otherwise coordinated.
4.Be responsible for subsequent radar handoffs
and communications transfer, including flight data
revisions and coordination, unless otherwise agreed
to by the receiving controller or as specified in a LOA.
b.The receiving controller must:
1.Ensure that the target position corresponds
with the position given by the transferring controller
or that there is an association between a computer
data block and the target being transferred prior toapproving a point out.
2.Be responsible for separation between point
out aircraft and other aircraft for which he/she hasseparation responsibility.
3.Issue restrictions necessary to provide
separation from other aircraft within his/her area ofjurisdiction.
5−4−8. AUTOMATED INFORMATION
TRANSFER (AIT)
Transfer radar identification, altitude control, and/or
en route fourth line control information, without
verbal coordination under the following conditions:
a.During radar handoff; and
b.Via information displayed in full data blocks;
and
c.Within the same facility, except as provided in
Paragraph 5 −4−9, Interfacility Automated
Information Transfer; and
d.When following procedures specified in your
facility AIT directive.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/165/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−4−5 Transfer of Radar IdentificationREFERENCE −
F AAO JO 7110.65, Para 5 −4−1 1, En Route Fourth Line Data Block
Usage.
5−4−9. INTERFACILITY AUTOMATED
INFORMATION TRANSFER
EN ROUTE
Transfer radar identification without verbal
coordination under the following conditions:
a.During radar handoff; and
b.Via information displayed in full data blocks;
and
c.On aircraft at assigned altitude in level flight;
and
d.Only the first sector within the receiving facility
must utilize the procedure; and
e.When following procedures specified in your
facility AIT directive and LOA.
5−4−10. PREARRANGED COORDINATION
Prearranged coordination allowing aircraft under
your control to enter another controller’s area of
jurisdiction may only be approved providedprocedures are established and published in a facility
directive/LOA in accordance with FAAO JO 7210.3,
Paragraph 3 −6−7, Prearranged Coordination.
NOTE−
Under no circumstances may one controller permit anaircraft to enter another’ s airspace without proper
coordination. Coordination can be accomplished by
several means; i.e., radar handoff, automated information
transfer, verbal, point −out, and by prearranged
coordination procedures identified in a facility directivethat clearly describe the correct application. Airspace
boundaries should not be permitted to become barriers to
the efficient movement of traffic. In addition, completecoordination, awar eness of traffic flow, and understanding
of each position’ s responsibility concerning penetration of
another’ s airspace cannot be overemphasized.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−14, Coordinate Use of Airspace.
F AAO JO 7110.65, Para 5 −4−3, Methods.
F AAO JO 7110.65, Para 5 −4−8, Automated Information Transfer
(AIT).
FAAO JO 7210.3, Para 3 −6−7, Prearranged Coordination.5−4−11. EN ROUTE FOURTH LINE DATA
BLOCK USAGE
a.The fourth line of the data block must be
displayed. When used for forwarding control
information, only the specified messages listed in this
section may be used. Any additional control
information must be forwarded via other
communications methods. Free text may be used by
individual sector teams for recording information the
team deems appropriate for managing the sector, but
must be removed prior to initiation of identification
transfer.
REFERENCE −
F AAO JO 7110.65, Para 5 −4−5, Transferring Controller Handoff,
subpara b.F AAO JO 71 10.65, Para 5 −4−8, Automated Information Transfer
(AIT).
F AAO JO 7110.65, Para 5 −4−9, Interfacility Automated Information
Transfer.
b.The en route fourth line data block area must be
used for coordination purposes only in association
with radar identified aircraft.
c.When automated information transfer (AIT)
procedures are applied, en route fourth line usage for
transfer of control information must be specificallydefined within facility AIT directive.
REFERENCE −
F AAO JO 7110.65, Para 5 −4−8, Automated Information Transfer
(AIT).
F AAO JO 7210.3, Para 4 −3−8, Automated Information T ransfer (AIT).
d.Coordination format for assigned headings
must use the designation character “H” preceding athree−digit number.
EXAMPLE −
H080, H270
e.Aircraft assigned a heading until receiving a fix
or joining a published route must be designated withassigned heading format followed by the fix or route.
EXAMPLE −
H080/ALB, 080/J121, PH/ALB
NOTE−
1.The notation “PH” may be used to denote present
heading.
2.The character “H” may be omitted as a prefix to the
heading assignment only if necessary due to character field
limitations, and it does not impede understanding.
f.Coordination format for weather deviations
must use the designated characters: D-deviation
L-left
R-right3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−4−6 Transfer of Radar IdentificationN-north
E-east
S-south
W-west
/F – direct next NA V AID/waypointD+2 headings – deviate between.
NOTE−
1.Two digits specify turns in degrees and must include
direction character(s). Three digits specify heading(s).
2.The inclusion of a /NAVAID, /waypoint, or /F indicates
that the pilot has been authorized to deviate for weatherand must r ejoin the r oute at the next NAV AID, waypoint, or
fix in the r oute of flight in accor dance with the phraseology
in paragraph 2-6-4.
EXAMPLE −
D90/ATL, DL/KD75U, D090/F
3. The absence of a NAV AID, waypoint, or /F indicates that
the pilot has been authorized to deviate for weather only,and the receiving controller must provide a clearance torejoin the route in accordance with paragraph 2-1-15c.
EXAMPLE −
DN, D20L, D30R, D080+120
g.Coordination format for assigned airspeeds
must use the designation character “S” preceding athree−digit number.
NOTE−
A “+” notation may be added to denote an assigned speedat or greater than the displayed value. A “ −” notation may
be added to denote an assigned speed at or less than thedisplayed value.
EXAMPLE −
S210, S250, S250+, S280 −
h.Aircraft assigned a Mach number must use the
designation “M” preceding the two −digit assigned
value.EXAMPLE −
M80, M80+, M80 −
REFERENCE −
F AAO JO 7110.65, Para 5 −4−1 1, En Route Fourth Line Data Block
Usage, subpara gNOTE.
i.Aircraft authorized to conduct celestial
navigation training within 30 NM of the route
centerline specified within the en route clearance.
EXAMPLE −
CELNAV
j.Coordination format for aircraft requesting an
altitude change must use the designation characters
“RQ” preceding a three −digit number.
EXAMPLE −
RQ170, RQ410
k.Coordination format for aircraft requesting a
route change must use the designation “RQ/”
preceding a specific fix identifier.
EXAMPLE −
RQ/LAX, RQ/NEUTO
l.The acceptance of a handoff by the receiving
controller must constitute receipt of the informationcontained within the en route fourth line data block.
This information must not be modified outside of the
controller’s area of jurisdiction unless verballycoordinated or specified in a Letter of Agreement or
Facility Directive. It is the responsibility of the
receiving controller to advise the transferringcontroller if any information is not understood, or
needs to be revised.
NOTE−
Due to system and character limitations the usage of these
standardized entries may require additional support via
facility dir ective in or der to pr ovide complete coor dination.
m.All other control information must be
coordinated via other methods.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−5−1 Radar SeparationSection 5. Radar Separation
5−5−1. APPLICATION
a.Radar separation must be applied to all RNA V
aircraft operating at and below FL450 on Q routes or
random RNA V routes, excluding oceanic airspace.
EXCEPTION. GNSS-equipped aircraft /G, /L, /S,
and /V not on a random impromptu route.
REFERENCE −
FAAO JO 7110.5, Para 238, Aircraft Equipment Suffixes.
FAAO JO 7110.5, TBL 2310, Aircraft Equipment Suffixes
FAAO JO 7110.65, Para 441, Route Use.
AIM, Para 518d., Area Navigation (RNAV).
AIM, Para 534a.3. Area Navigation (RNAV) Routes.P/CG Term Global Navigation Satellite System (GNSS)[ICAO].
P/CG Term Global Positioning Satellite/ Wide Area Augmentation
Minimum En Route IFR Altitude (GPS/WAAS MEA).P/CG Term – Parallel Offset Route.
AC 90101A, U.S. Terminal and En Route Area Navigation (RNAV)
Operations, Para 8a, Navigation System Accuracy.
b.Radar separation may be applied between:
1.Radar identified aircraft.
2.An aircraft taking off and another radar
identified aircraft when the aircraft taking off will be
radar-identified within 1 mile of the runway end.
3.A radar-identified aircraft and one not
radar-identified when either is cleared to climb/
descend through the altitude of the other provided:
(a)The performance of the radar system is
adequate and, as a minimum, primary radar targets or
ASR−9/Full Digital Radar Primary Symbol targets
are being displayed on the display being used within
the airspace within which radar separation is being
applied; and
(b)Flight data on the aircraft not radar-
identified indicate it is a type which can be expected
to give adequate primary/ASR −9/Full Digital Radar
Primary Symbol return in the area where separationis applied; and
(c)The airspace within which radar separa-
tion is applied is not less than the following numberof miles from the edge of the radar display:
(1)When less than 40 miles from the
antenna−6 miles;
(2)When 40 miles or more from the
antenna−10 miles ;(3)Narrowband radar operations −
10 miles; and
(d)Radar separation is maintained between
the radar-identified aircraft and all observed primary,
ASR−9/Full Digital Radar Primary Symbol, and
secondary radar targets until nonradar separation isestablished from the aircraft not radar identified; and
(e)When the aircraft involved are on the same
relative heading, the radar-identified aircraft is
vectored a sufficient distance from the route of theaircraft not radar identified to assure the targets are
not superimposed prior to issuing the clearance to
climb/descend.
REFERENCE −
F AAO JO 7110.65, Para 4 −1−2, Exceptions.
F AAO JO 7110.65, Para 4 −4−1, Route Use.
F AAO JO 7110.65, Para 5 −3−1, Application.
F AAO JO 7110.65, Para 5 −5−8, Additional Separation for Formation
Flights.
F AAO JO 7110.65, Para 5 −9−5, Approach Separation Responsibility.
4.A radar-identified aircraft and one not
radar-identified that is in transit from oceanic
airspace or non-radar offshore airspace into an area of
known radar coverage where radar separation isapplied as specified in Paragraph 8-5-5, Radar
Identification Application, until the transiting aircraft
is radar-identified or the controller establishes otherapproved separation in the event of a delay or
inability to establish radar identification of the
transiting aircraft.
REFERENCE −
F AAO JO 7110.65, Para 2-2-6, IFR Flight Progress Data. F AAO JO 7110.65, Para 5-1-1, Presentation and Equipment
Performance.
F AAO JO 7110.65, Para 5-3-1, Application.F AAO JO 7110.65, Para 8-1-8, Use of Control Estimates.
F AAO JO 7110.65, Para 8-5-5, Radar Separation.
5−5−2. TARGET SEPARATION
Apply radar separation:
a.Between the centers of primary radar targets;
however, do not allow a primary target to touch
another primary target or a beacon control slash.
b.Between the ends of beacon control slashes.
c.Between the end of a beacon control slash and
the center of a primary target.
JO 7110.65W 12/10/15
5−5−2 Radar Separationd.All−digital displays. Between the centers of
digitized targets. Do not allow digitized targets to
touch.
REFERENCE −
FAAO JO 7110.65, Para 5 −9−7, Simultaneous Independent
Appr oaches− Dual & Triple.
5−5−3. TARGET RESOLUTION
a.A process to ensure that correlated radar targets
or digitized targets do not touch.
b.Mandatory traffic advisories and safety alerts
must be issued when this procedure is used.
NOTE−
This procedure must not be pr ovided utilizing mosaic radar
systems.
c.Target resolution must be applied as follows:
1.Between the edges of two primary targets or
the edges of primary digitized targets.
2.Between the end of the beacon control slash
and the edge of a primary target or primary digitized
target.
3.Between the ends of two beacon control
slashes.
5−5−4. MINIMA
Separate aircraft by the following minima:
a.TERMINAL . Single Sensor ASR or Digital
Terminal Automation System (DTAS):
NOTE−
Includes single sensor long range radar mode.
1.When less than 40 miles from the antenna −
3 miles .
2.When 40 miles or more from the antenna −
5 miles .
3.For single sensor ASR −9 with Mode S, when
less than 60 miles from the antenna − 3 miles .
4.For single sensor ASR −11 MSSR Beacon,
when less than 60 miles from the antenna − 3 miles .
NOTE−
Wake turbulence procedures specify increased separation
minima required for certain classes of aircraft because of
the possible effects of wake turbulence.
b.TERMINAL. FUSION:1.Fusion target symbol – 3 miles.
2.When displaying ISR in the data block- 5
miles.
NOTE−
In the event of an unexpected IS R on one or more aircraft,
the ATCS working that aircraft must transition from 3-mile
to 5-mile separation, or establish some other form of
approved separation (visual or vertical) as soon as
feasible. This action must be timely, but taken in a
reasonable fashion, using the controller’ s best judgment,
as not to reduce safety or the integrity of the traffic
situation. For example, if ISR appears when an aircraft is
established on final with another aircraft on short final, it
would be beneficial from a safety perspective to allow the
trailing aircraft to continue the approach and land rather
than terminate a stabilized approach.
3.If TRK appears in the data block, handle in
accordance with Paragraph 5-3-7, Identification
Status, subparagraph b, and take appropriate steps to
establish non-radar separation.
4.ADS-B may be integrated as an additional
surveillance source when operating in FUSION
mode. The display of ADS-B targets is permitted and
does not require radar reinforcement.
NOTE−
ADS-B surveillance must only be used when operating in
FUSION.
5.The use of ADS-B only information may be
used to support all radar requirements associated with
any published instrument procedure that is annotated
“Radar Required”.
6.The ADS-B Computer Human Interface
(CHI) may be implemented by facilities on a sector by
sector or facility wide basis when the determination
is made that utilization of the ADS-B CHI provides
an operational advantage to the controller.
c.EBUS, Terminal Mosaic/Multi-Sensor Mode
NOTE−
Mosaic/Multi −Sensor Mode combines radar input from 2
to 16 sites into a single picture utilizing a mosaic gridcomposed of radar sort boxes.
1.Below FL 600 −5 miles.
2.At or above FL 600 −10 miles.
3.Facility directives may specify 3 miles for
areas meeting all of the following conditions:
(a)Radar site adaptation is set to single
sensor.
JO 7110.65W 12/10/15
5−5−3 Radar Separation(b)Significant operational advantages can be
obtained.
(c)Within 40 miles of the antenna.
(d)Up to and including FL 230.
(e)Facility directives specifically define the
area where the separation can be applied and define
the requirements for displaying the area on the
controller’s display.
REFERENCE −
F AAO JO 7210.3, Para 8-2-1, Three Mile Airspace Operations
F AAO JO 7210.3, Para 11-8-15, Single Site Coverage ATTS
Operations
4.When transitioning from terminal to en route
control, 3 miles increasing to 5 miles or greater,provided:
(a)The aircraft are on diverging routes/
courses, and/or
(b)The leading aircraft is and will remain
faster than the following aircraft; and
(c)Separation constantly increasing and the
first center controller will establish 5 NM or otherappropriate form of separation prior to the aircraft
departing the first center sector; and
(d)The procedure is covered by a letter of
agreement between the facilities involved and limited
to specified routes and/or sectors/positions.
d.ERAM:
1.Below FL 600- 5 miles.
2.At or above FL 600- 10 miles
3.Below FL 230 where all the following
conditions are met – 3 miles:
(a)Significant operational advantages can be
obtained.
(b)Within 40 miles of the preferred sensor,
and within the 3 NM separation area.
(c)The preferred sensor is providing reliable
beacon targets.
(d)Facility directives specifically define the
3 NM separation area.
(e)The 3 NM separation area is displayable
on the video map.
(f)Involved aircraft are displayed using the 3
NM target symbol.4.When transitioning from terminal to en route
control, 3 miles increasing to 5 miles or greater,
provided:
(a)The aircraft are on diverging routes/
courses, and/or
(b)The leading aircraft is and will remain
faster than the following aircraft; and
(c)Separation constantly increasing and the
first center controller will establish 5 NM or other
appropriate form of separation prior to the aircraft
departing the first center sector; and
(d)The procedure is covered by a letter of
agreement between the facilities involved and limited
to specified routes and/or sectors/positions.
REFERENCE −
F AAO JO 7210.3, Para 8-2-1, Three Mile Airspace Operations
F AAO JO 7210.3, Para 11-8-15, Single Site Coverage ATTS
Operations
e.MEARTS Mosaic Mode:
1.Below FL 600- 5 miles.
2.At or above FL 600- 10 miles.
3.For areas meeting all of the following
conditions – 3 miles :
(a)Radar site ada ptation is set to single sensor
mode.
NOTE−
1.Single Sensor Mode displays information from the
radar input of a single site.
2.Procedures to convert MEARTS Mosaic Mode to
MEARTS Single Sensor Mode at each PVD/MDM will beestablished by facility directive.
(b)Significant operational advantages can be
obtained.
(c)Within 40 miles of the antenna.
(d)Below FL 180.
(e)Facility directives specifically define the
area where the separation can be applied and define
the requirements for displaying the area on the
controller’s PVD/MDM.
4.MEARTS Mosaic Mode Utilizing Single
Source Polygon (San Juan CERAP and Honolulu
Control Facility only) when meeting all of the
following conditions– 3 miles :
(a)Less than 40 miles from the antenna,
below FL180, and tar gets are from the adap ted sensor.
JO 7110.65W 12/10/15
5−5−4 Radar Separation(b)The single source polygon must be
displayed on the controller’s PVD/MDM.
(c)Significant operational advantages can be
obtained.
(d)Facility directives specifically define the
single source polygon area where the separation can
be applied and specify procedures to be used.
(e)Controller must commence a transition to
achieve either vertical separation or 5 mile lateral
separation in the event that either target is not from
the adapted sensor.
f.STARS Multi −Sensor Mode:
NOTE−
1.In Multi−Sensor Mode, ST ARS displays targets as filled
and unfilled boxes, depending upon the target’ s distancefrom the radar site providing the data. Since there ispresently no way to identify which specific site is pr oviding
data for any given target, utilize separation standards for
targets 40 or more miles from the antenna.
2.When operating in STARS Single Sensor Mode, if TRK
appears in the data block, handle in accordance with
para 5−3−7, Identification Status, subpara b, and take
appropriate steps to establish nonradar separation.
3.TRK appears in the data block whenever the aircraft is
being tracked by a radar site other than the radar curr ently
selected. Current equipment limitations preclude a target
from being displayed in the single sensor mode; however,a position symbol and data block, including altitudeinformation, will still be displayed. Ther efore, low altitude
alerts must be provided in accordance with para 2 −1−6 ,
Safety Alert.
WAKE TURBULENCE APPLICATION
g.Separate aircraft operating directly behind or
following an aircraft conducting an instrument
approach by the minima specified and in accordance
with the following:
NOTE−
Consider parallel runways less than 2,500 feet apart as a
single runway because of the possible effects of wake
turbulence.
1.When operating within 2,500 feet of the flight
path of the leading aircraft over the surface of the
earth and less than 1,000 feet below:
(a)TERMINAL. Behind super:
(1)Heavy - 6 miles.
(2)Large - 7 miles.(3)Small - 8 miles.
(b)EN ROUTE. Behind super - 5 miles,
unless the super is operating at or below FL240 and
below 250 knots, then:
(1)Heavy - 6 miles.
(2)Large - 7 miles.
(3)Small - 8 miles.
(c)Behind heavy:
(1)Heavy - 4 miles.
(2)Large or small - 5 miles.
2.Separate small aircraft behind a B757 by 4
miles when operating within 2,500 feet of the flight
path of the leading aircraft over the surface of the
earth and/or less than 500 feet below.
3.TERMINAL. When departing parallel
runways separated by less than 2,500 feet, the 2,500
feet requirement in subparagraph 2 is not required
when a small departs the parallel runway behind a
B757. Issue a wake turbulence cautionary advisory
and instructions that will establish lateral separation
in accordance with subparagraph 2. Do not issue
instructions that will allow the small to pass behind
the B757.
NOTE−
The application of paragraph 5-8-3, Successive or
Simultaneous Departures, satisfies this requirement when
an initial heading is issued with the take-off clearance.
WAKE TURBULENCE APPLICATION
h.In addition to subpara g, separate an aircraft
landing behind another aircraft on the same runway,
or one making a touch-and-go, stop-and-go, or lowapproach by ensuring the following minima will exist
at the time the preceding aircraft is over the landing
threshold:
NOTE−
Consider parallel runways less than 2,500 feet apart as a
single runway because of the possible effects of wake
turbulence.
1.Small behind large − 4 miles .
2.Small behind heavy − 6 miles.
If the landing threshold cannot be determined, apply
the above minima as constant or increasing at the
closest point that can be determined prior to the
landing threshold.
JO 7110.65W 12/10/15
5−5−5 Radar Separationi.TERMINAL. When NOWGT is displayed in an
aircraft data block, provide 10 miles separation
behind the preceding aircraft and 10 miles separation
to the succeeding aircraft.
j.TERMINAL . 2.5 nautical miles (NM) separa-
tion is authorized between aircraft established on the
final approach course within 10 NM of the landingrunway when operating in single sensor slant range
mode and aircraft remains within 40 miles of the
antenna and:
1.The leading aircraft’s weight class is the same
or less than the trailing aircraft;
2.Super and heavy aircraft are permitted to
participate in the separation reduction as the trailing
aircraft only;
3.An average runway occupancy time of
50 seconds or less is documented;
4.CTRDs are operational and used for quick
glance references;
REFERENCE −
F AAO JO 7110.65, Para 3 −1−9 , Use of Tower Radar Displays.
5.Turnoff points are visible from the control
tower.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−19 , Wake Turbulence.
F AAO JO 7110.65, Para 3 −9−6 , Same Runway Separation.
F AAO JO 7110.65, Para 5 −5−7 , Passing or Diverging.
F AAO JO 7110.65, Para 5 −5−9 , Separation from Obstructions.
F AAO JO 7110.65, Para 5 −8−3 , Successive or Simultaneous
Departures.
F AAO JO 7110.65, Para 5 −9−5 , Approach Separation Responsibility.
F AAO JO 7110.65, Para 7 −6−7 , Sequencing.
F AAO JO 7110.65, Para 7 −7−3 , Separation.
F AAO JO 7110.65 Para 7 −8−3 , Separation.
FAAO JO 7210.3, Para 10 −4−11 , Reduced Separation on Final.
5−5−5. VERTICAL APPLICATION
Aircraft not laterally separated, may be vertically
separated by one of the following methods:
a.Assign altitudes to aircraft, provided valid
Mode C altitude information is monitored and theapplicable separation minima is maintained at all
times.
REFERENCE −
F AAO JO 7110.65, Para 4 −5−1 , Vertical Separation Minima.
F AAO JO 7110.65, Para 5 −2−17 , Validation of Mode C Readout.
F AAO JO 7110.65, Para 7 −7−3 , Separation.
F AAO JO 7110.65, Para 7 −8−3 , Separation.
F AAO JO 7110.65, Para 7 −9−4 , Separation.b.Assign an altitude to an aircraft after the aircraft
previously at that altitude has been issued a
climb/descent clearance and is observed (valid
Mode C), or reports leaving the altitude.
NOTE−
1.Consider known aircraft performance characteristics,
pilot furnished and/or Mode C detected information which
indicate that climb/descent will not be consistent with the
rates recommended in the AIM.
2.It is possible that the separation minima described in
para 4−5−1 , Vertical Separation Minima, para 7 −7−3 ,
Separation, para 7 −8−3 , Separation, or para 7 −9−4 ,
Separation, might not always be maintained usingsubpara b. However, correct application of this procedure
will ensure that aircraft are safely separated because the
first aircraft must have already vacated the altitude priorto the assignment of that altitude to the second aircraft.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−3 , Procedural Preference.
F AAO JO 7110.65, Para 4 −5−1 , Vertical Separation Minima.
F AAO JO 7110.65, Para 5 −2−17 , Validation of Mode C Readout.
F AAO JO 7110.65, Para 6 −6−1 , Application.
5−5−6. EXCEPTIONS
a.Do not use Mode C to effect vertical separation
with an aircraft on a cruise clearance, contact
approach, or as sp ecified in para 5 −15−4, System
Requirements, subpara e3.
REFERENCE −
F AAO JO 7110.65, Para 6 −6−2 , Exceptions.
F AAO JO 7110.65, Para 7 −4−6 , Contact Approach.
P/CG Term − Cruise.
b.Assign an altitude to an aircraft only after the
aircraft previously at that altitude is observed at orpassing through another altitude separated from the
first by the appropriate minima when:
1.Severe turbulence is reported.
2.Aircraft are conducting military aerial
refueling.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−13 , Military Aerial Refueling.
3.The aircraft previously at that altitude has
been issued a climb/descent at pilot’s discretion.
5−5−7. PASSING OR DIVERGING
a.TERMINAL . In accordance with the following
criteria, all other approved separation may be
discontinued and passing or diverging separation
applied when:
1.Single Site ASR or FUSION Mode
JO 7110.65W 12/10/15
5−5−6 Radar Separation(a)Aircraft are on opposite/reciprocal
courses and you have observed that they have passed
each other; or aircraft are on same or crossing
courses/assigned radar vectors and one aircraft has
crossed the projected course of the other, and theangular difference between their courses/assigned
radar vectors is at least 15 degrees.
NOTE−
Two aircraft, both assigned radar vectors with an angulardifference of at least 15 degrees, is considered a correct
application of this paragraph.
(b)The tracks are monitored to ensure that the
primary targets, beacon control slashes, FUSION
target symbols, or full digital terminal systemprimary and/or beacon target symbols will not touch.
REFERENCE −
F AAO JO 7110.65, Para 1 -2-2 , Course Definitions.
2.Single Site ARSR or FUSION Mode when
target refresh is only from an ARSR or when inFUSION Mode − ISR is displayed.
(a)Aircraft are on opposite/reciprocal
courses and you have observed that they have passed
each other; or aircraft are on same or crossing
courses/assigned radar vectors and one aircraft hascrossed the projected course of the other, and the
angular difference between their courses/assigned
radar vectors is at least 45 degrees.
NOTE−
Two aircraft, both assigned radar vectors with an angulardifference of at least 45 degrees, is considered a correctapplication of this paragraph.
(b)The tracks are monitored to ensure that the
primary targets, beacon control slashes, FUSIONtarget symbols, or full digital terminal system
primary and/or beacon target symbols will not touch.
3.Although approved separation may be
discontinued, the requirements of Para 5-5-4,Minima, subparagraph g must be applied when wake
turbulence separation is required.
REFERENCE −
FAAO JO 7110.65, Para 1 −2−2 , Course Definitions.
NOTE−
Apply en route separation rules when using multi −sensor
mode.
b.EN ROUTE. Vertical separation between
aircraft may be discontinued when they are onopposite courses as defined in para 1 −2−2, Course
Definitions; and
1.You are in communications with both aircraft
involved; and
2.You tell the pilot of one aircraft about the
other aircraft, including position, direction, type; and
3.One pilot reports having seen the other
aircraft and that the aircraft have passed each other;
and
4.You have observed that the radar targets have
passed each other; and
5.You have advised the pilots if either aircraft
is classified as a super or heavy aircraft.
6.Although vertical separation may be discon-
tinued, the requirements of Para 5 −5−4, Minima,
subparagraph g must be applied when wake
turbulence separation is required.
EXAMPLE −
“Traffic, twelve o’clock, Boeing Seven Twenty Seven,opposite direction. Do you have it in sight?”
(If the answer is in the affirmative):
“Report passing the traffic.”(When pilot reports passing the traffic and the radar
targets confirm that the traffic has passed, issue
appropriate control instructions.)
5−5−8. ADDITIONAL SEPARATION FOR
FORMATION FLIGHTS
Because of the distance allowed between formation
aircraft and lead aircraft, additional separation is
necessary to ensure the periphery of the formation is
adequately separated from other aircraft, adjacent
airspace, or obstructions. Provide supplemental
separation for formation flights as follows:
a.Separate a standard formation flight by adding
1 mile to the appropriate radar separation minima.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−13 , Formation Flights.
F AAO JO 7110.65, Para 5 −5−1 , Application.
F AAO JO 7110.65, Para 7 −7−3 , Separation.
P/CG Term − Formation Flight.
b.Separate two standard formation flights from
each other by adding 2 miles to the appropriate
separation minima.
JO 7110.65W 12/10/15
5−5−7 Radar Separationc.Separate a nonstandard formation flight by
applying the appropriate separation minima to the
perimeter of the airspace encompassing the
nonstandard formation or from the outermost aircraft
of the nonstandard formation whichever applies.
d.If necessary for separation between a
nonstandard formation and other aircraft, assign an
appropriate beacon code to each aircraft in theformation or to the first and last aircraft in-trail.
NOTE−
The additional separation provided in Paragraph 5 −5−8,
Additional Separation for Formation Flights, is notnormally added to wake tur bulence separation when a
formation is following a heavier aircraft since none of the
formation aircraft are likely to be closer to the heavier
aircraft than the lead aircraft (to which the prescribedwake turbulence separation has been applied).
REFERENCE −
F AAO JO 7110.65, Para 9 −2−13 , Military Aerial Refueling.
5−5−9. SEPARATION FROM
OBSTRUCTIONS
a.TERMINAL. Separate aircraft from obstruc-
tions depicted on the radar display by the following
minima:
1.When less than 40 miles from the antenna −
3 miles.
2.When 40 miles or more from the antenna −
5 miles.
b.TERMINAL. Vertical separation of aircraft
above an obstruction depicted on the radar display
may be discontinued after the aircraft has passed it.
c.EAS. Apply the radar separation minima
specified in Para 5-5-4, Minima.
5−5−10. ADJACENT AIRSPACE
a.If coordination between the controllers
concerned has not been effected, separateradar-controlled aircraft from the boundary of
adjacent airspace in which radar separation is also
being used by the following minima:
REFERENCE −
F AAO JO 7110.65, Para 2 −1−14 , Coordinate Use of Airspace.
1.When less than 40 miles from the antenna −
11/2 miles.
2.When 40 miles or more from the antenna −
21/2 miles.3.EAS:
(a)Below Flight Level 600 − 2 1/2 miles .
(b)Flight Level 600 and above − 5 miles .
b.Separate radar-controlled aircraft from the
boundary of airspace in which nonradar separation is
being used by the following minima:
1.When less than 40 miles from the antenna −
3 miles .
2.When 40 miles or more from the antenna −
5 miles .
3.EAS:
(a)Below Flight Level 600 − 5 miles.
(b)Flight Level 600 and above − 10 miles.
c.The provisions of subparas a and b do not apply
to VFR aircraft being provided Class B, Class C, orTRSA services. Ensure that the targets of these
aircraft do not touch the boundary of adjacent
airspace.
d.VFR aircraft approaching Class B, Class C,
Class D, or TRSA airspace which is under thecontrol jurisdiction of another air traffic control
facility should either be provided with a radar handoff
or be advised that radar service is terminated, giventheir position in relation to the Class B, Class C,
Class D, or TRSA airspace, and the ATC frequency,
if known, for the airspace to be entered. These actionsshould be accomplished in sufficient time for the pilot
to obtain the required ATC approval prior to entering
the airspace involved, or to avoid the airspace.
5−5−11. EDGE OF SCOPE
Separate a radar-controlled aircraft climbing or
descending through the altitude of an aircraft that has
been tracked to the edge of the scope/display by thefollowing m inima until nonradar separation has been
established:
a.When less than 40 miles from the antenna −
3 miles from edge of scope.
b.When 40 miles or more from the antenna −
5 miles from edge of scope.
c.EAS:
1.Below Flight Level 600 − 5 miles .
2.Flight Level 600 and above − 10 miles .
JO 7110.65W 12/10/15
5−5−8 Radar Separation5−5−12. BEACON TARGET
DISPLACEMENT
When using a radar target display with a previously
specified beacon target displacement to separate a
beacon target from a primary target, adjacent
airspace, obstructions, or terrain, add a 1 milecorrection factor to the applicable minima. The
maximum allowable beacon target displacement
which may be specified by the facility air traffic
manager is 1/2 mile.
REFERENCE −
F AAO JO 7210.3, Para 3 −7−4, Monitoring of Mode 3/A Radar Beacon
Codes.
JO 7110.65W 12/10/15
5−6−1 VectoringSection 6. Vectoring
5−6−1. APPLICATION
Vector aircraft:
a.In controlled airspace for separation, safety,
noise abatement, operational advantage, confidence
maneuver, or when a pilot requests.
b.In Class G airspace only upon pilot request and
as an additional service.
c.At or above the MV A or the minimum IFR
altitude except as authorized for radar approaches,
special VFR, VFR operations, or by Para 5 −6−3,
Vectors Below Minimum Altitude.
NOTE−
VFR aircraft not at an altitude assigned by ATC may be
vectored at any altitude. It is the responsibility of the pilotto comply with the applicable parts of CFR Title 14.
REFERENCE −
F AAO JO 7110.65, Para 4 −5−6, Minimum En Route Altitudes.
F AAO JO 7110.65, Para 7 −5−2, Priority.
F AAO JO 7110.65, Para 7 −5−4, Altitude Assignment.
F AAO JO 7110.65, Para 7 −7−5, Altitude Assignments.
14 CFR Section 91.119, Minimum Safe Altitudes: General.
d.In airspace for which you have control
jurisdiction, unless otherwise coordinated.
e.So as to permit it to resume its own navigation
within radar coverage.
f.Operating special VFR only within Class B,
Class C, Class D, or Class E surface areas.
g.Operating VFR at those locations where a
special program is established, or when a pilot
requests, or you suggest and the pilot concurs.
REFERENCE −
F AAO JO 7110.65, Para 4 −4−1, Route Use.
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
F AAO JO 7110.65, Para 7 −5−3, Separation.
F AAO JO 7110.65, Para 7 −6−1, Application.
F AAO JO 7110.65, Para 9 −4−4, Separation Minima.
F AAO JO 7210.3, Chapter 11, Section 1, Terminal VFR Radar
Services.
5−6−2. METHODS
a.Vector aircraft by specifying:
1.Direction of turn, if appropriate, and
magnetic heading to be flown, or
PHRASEOLOGY −
TURN LEFT/RIGHT HEADING (degrees).FLY HEADING (degrees).
FLY PRESENT HEADING.
DEP ART (fix) HEADING (degrees).
2.The number of degrees, in group form, to turn
and the direction of turn, or
PHRASEOLOGY −
TURN (number of degrees) DEGREES LEFT/RIGHT.
3.For NO-GYRO procedures, the type of
vector, direction of turn, and when to stop turn.
PHRASEOLOGY −
THIS WILL BE A NO-GYRO VECTOR,
TURN LEFT/RIGHT.
STOP TURN.
b.When initiating a vector, advise the pilot of the
purpose, and if appropriate, what to expect when
radar navigational guidance is terminated.
PHRASEOLOGY −
VECTOR TO (fix or airway).
VECTOR TO INTERCEPT (name of NAVAID) (specified)
RADIAL.
VECTOR FOR SP ACING.
(if appropriate) EXPECT DIRECT (NAVAID, waypoint,
fix)
VECTOR TO FINAL APPROACH COURSE,
or if the pilot does not have knowledge of the type of
approach,
VECTOR TO (approach name) FINAL APPROACH
COURSE.
NOTE−
Determine optimum routing based on factors such as wind,
weather , traffic, pilot requests, noise abatement, adjacentsector requirement, and letters of agreement.
c.When vectoring or approving course deviations,
assign an altitude to maintain when:
1.The vector or approved deviation is off an
assigned procedure which contains altitude
instructions, i.e., instrument approach, etc.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−6−2 Vectoring2.The previously issued clearance included
crossing restrictions.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−5, Route or Altitude Amendments.
3.The vector or approved deviation is off an
assigned procedure that contains published altitude
restrictions, i.e., SID, STAR, and a clearance to Climb
Via/Descend Via has been issued.
d.When vectoring or approving an aircraft to
deviate off of a procedure that includes published
altitude restrictions, advise the pilot if you intend on
clearing the aircraft to resume the procedure.
PHRASEOLOGY −
FLY HEADING (degrees), MAINTAIN (altitude),
EXPECT TO RESUME (SID, STAR, etc.).
DEVIATION (restrictions if necessary) APPROVED,
MAINTAIN (altitude) EXPECT TO RESUME (SID, STAR,
etc.) AT (NAVAID, fix, waypoint)
NOTE−
After a Climb Via or Descend Via clearance has been
issued, a vector/deviation off of a SID/STAR cancels the
altitude r estrictions on the procedure. The air craft’ s Flight
Management System (FMS) may be unable to process
crossing altitude restrictions once the aircraft leaves the
SID/STAR lateral path. Without an assigned altitude, the
aircraft’ s FMS may revert to leveling off at the altitude set
by the pilot, which may be the SID/STAR’s published top or
bottom altitude.
e.Provide radar navigational guidance until the
aircraft is:
1.Established within the airspace to be
protected for the nonradar route to be flown, or
2.On a heading that will, within a reasonable
distance, intercept the nonradar route to be flown, and
3.Informed of its position unless the aircraft is
RNA V , FMS, or DME equipped and being vectored
toward a VORTAC/TACAN or waypoint and within
the service volume of the NA V AID.
PHRASEOLOGY −
(Position with r espect to course/fix along r oute), RESUME
OWN NAVIGATION, FLY HEADING (degrees). WHEN
ABLE, PROCEED DIRECT (name of fix), RESUME (SID/
STAR/transition/procedure).
REFERENCE −
F AAO JO 7110.65, Chapter 4, Section 1, NAVAID Use Limitations.
F AAO JO 7110.65,Paragraph 4-5-7, Altitude Information
f.Aircraft instructed to resume a procedure which
contains restrictions (SID/STAR, etc.) must beissued/reissued all applicable restrictions or must be
advised to comply with those restrictions.
PHRASEOLOGY −
RESUME (name/SID/transition/STAR), COMPLY WITH
RESTRICTIONS.
PROCEED DIRECT (NAVAID, fix, waypoint) CROSS
(NAVAID, fix, waypoint) AT/AT OR ABOVE/AT OR
BELOW (altitude) CLIMB VIA/DESCEND VIA
(SID/STAR)
EXAMPLE −
“Resume the Mudde One Arrival, comply with
restrictions.”“Cleared direct Luxor, resume the Ksino One arrival,
comply with restrictions.”
“Cleared dir ect HITME, cross HITME at or above one one
thousand, climb via the Boach Five departure.”
g.Aircraft may not be vectored off an Obstacle
Departure Procedure (ODP), or issued an altitude
lower than published altitude on an ODP, until at or
above the MV A/MIA, at which time the ODP is
cancelled.
NOTE−
Once an aircraft has been vectored off an Obstacle
Departure Procedure, the procedur e is cancelled and ATC
cannot clear the aircraft to resume the ODP .
REFERENCE −
P/CG− Obstacle Departure Procedure
h.Aircraft vectored off an RNA V route must be
recleared to the next waypoint or as requested by the
pilot.
i.When flight data processing is available, update
the route of flight in the computer unless an
operational advantage is gained and coordination is
accomplished.
j.Inform the pilot when a vector will take the
aircraft across a previously assigned nonradar route.
PHRASEOLOGY −
EXPECT VECTOR ACROSS (NAVAID radial)(airway/route/course) FOR (purpose).
REFERENCE −
F AAO JO 7110.65, Para 7 −6−1, Application.
5−6−3. VECTORS BELOW MINIMUM
ALTITUDE
Except in en route automated environments in areas
where more than 3 miles separation minima is
required, you may vector a departing IFR aircraft, or
one executing a missed approach, within 40 miles of
the radar antenna and before it reaches the minimum3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−6−3 Vectoringaltitude for IFR operations if separation from
prominent obstacles shown on the radar scope is
applied in accordance with the following:
a.If the flight path is 3 miles or more from the
obstacle and the aircraft is climbing to an altitude at
least 1,000 feet above the obstacle, vector the aircraft
to maintain at least 3 miles separation from the
obstacle until the aircraft reports leaving an altitude
above the obstacle.
b.If the flight path is less than 3 miles from the
obstacle and the aircraft is climbing to an altitude at
least 1,000 feet above the obstacle, vector the aircraft
to increase lateral separation from the obstacle untilthe 3 mile minimum is achieved or until the aircraft
reports leaving an altitude above the obstacle.
REFERENCE −
P/CG T erm − Obstacle.
P/CG Term − Obstruction.
P/CG T erm − Prominent Obstacle.
c.At those locations where diverse vector areas
(DV A) have been established, terminal radarfacilities may vector aircraft below the MV A/MIA
within those areas and along those routes described in
facility directives.
REFERENCE −
FAAO JO 7210.3, Para 3 −9−5, Establishing Diverse V ector Area/s
(DVA).5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−7−1 Speed AdjustmentSection 7. Speed Adjustment
5−7−1. APPLICATION
Keep speed adjustments to the minimum necessary to
achieve or maintain required or desired spacing.
Avoid adjustments requiring alternate decreases and
increases. Terminate speed adjustments when no
longer needed.
NOTE−
It is the pilot’ s responsibility and prerogative to refusespeed adjustment that he/she considers excessive orcontrary to the aircraft’ s operating specifications.
a.Consider the following when applying speed
control:
1.Determine the interval required and the point
at which the interval is to be accomplished.
2.Implement speed adjustment based on the
following principles.
(a)Priority of speed adjustment instructions
is determined by the relative speed and position of the
aircraft involved and the spacing requirement.
(b)Speed adjustments are not achieved
instantaneously. Aircraft configuration, altitudes,
and speed determine the time and distance required toaccomplish the adjustment.
3.Use the following techniques in speed control
situations:
(a)Compensate for compression when
assigning ai r speed adjustment in an in-trail situation
by using one of the following techniques:
(1)Reduce the trailing aircraft first.
(2)Increase the leading aircraft first.
(b)Assign a specific airspeed if required to
maintain spacing.
(c)Allow increased time and distance to
achieve speed adjustments in the following
situations:
(1)Higher altitudes.
(2)Greater speed.
(3)Clean configurations.(d)Ensure that aircraft are allowed to operate
in a clean configuration as long as circumstances
permit.
(e)Keep the number of speed adjustments per
aircraft to the minimum required to achieve andmaintain spacing.
b.Do not assign speed adjustment to aircraft:
1.At or above FL 390 without pilot consent.
2.Executing a published high altitude instru-
ment approach procedure.
3.In a holding pattern.
REFERENCE −
F AAO JO 7110.65, Para 4 −6−4, Holding Instructions.
4.Inside the fi nal approach fix on final or a point
5 miles from the runway, whichever is closer to therunway.
c.At the time approach clearance is issued,
previously issued speed adjustments must be restated
if required.
d.Approach clearances cancel any previously
assigned speed adjustment. Pilots are expected to
make their own speed adjustments to complete the
approach unless the adjustments are restated.
e.If feasible, when issuing speed adjustments to
aircraft cleared along a route or procedure that haspublished speed restrictions, advise aircraft where to
resume published speed.
f.Express speed adjustments in terms of knots
based on indicated airspeed (IAS) in 10 −knot
increments. At or above FL 240, speeds may beexpressed in terms of Mach numbers in 0.01 incre-
ments for turbojet aircraft with Mach meters
(i.e., Mach 0.69, 0.70, 0.71, etc.).
NOTE−
1.Pilots complying with speed adjustment instructions
should maintain a speed within plus or minus 10 knots or0.02 Mach number of the specified speed.
2.When assigning speeds to achieve spacing between
aircraft at different altitudes, consider that ground speedmay vary with altitude. Further speed adjustment may be
necessary to attain the desired spacing.
REFERENCE −
F AAO JO 7110.65, Para 5 −7−2, Methods.
JO 7110.65W 12/10/15
5−7−2 Speed Adjustment5−7−2. METHODS
a.Instruct aircraft to:
1.Maintain present/specific speed.
2.Maintain specified speed or greater/less.
3.Maintain the highest/lowest practical speed.
4.Increase or reduce to a specified speed or by
a specified number of knots.
PHRASEOLOGY −
SAY AIRSPEED.
SAY MACH NUMBER.
MAINTAIN PRESENT SPEED.MAINTAIN (specific speed) KNOTS.
MAINTAIN (specific speed) KNOTS OR GREATER.
DO NOT EXCEED (speed) KNOTS.
MAINTAIN MAXIMUM FORWARD SPEED.
MAINTAIN SLOWEST PRACTICAL SPEED.INCREASE/REDUCE SPEED:
TO (specified speed in knots),
or
TO MACH (Mach number),
or(number of knots) KNOTS.
EXAMPLE −
“Increase speed to Mach point seven two.”
“Reduce speed to two five zero.”“Reduce speed twenty knots.”
“Maintain two eight zero knots.”
“Maintain maximum forward speed.”
NOTE−
1.A pilot operating at or above 10,000 feet MSL on an
assigned speed adjustment greater than 250 knots is
expected to comply with 14 CFR Section 91.117(a) when
cleared below 10,000 feet MSL, within domestic airspace,
without notifying ATC. Pilots are expected to comply with
the other provisions of 14 CFR Section 91.117 withoutnotification.
2.Speed restrictions of 250 knots do not apply to aircraft
operating beyond 12 NM from the coastline within theU.S. Flight Information Region, in offshore Class E
airspace below 10,000 feet MSL. However, in airspaceunderlying a Class B airspace area designated for an
airport, or in a VFR corridor designated through such as
a Class B airspace area, pilots are expected to comply with
the 200 knot speed limit specified in 14 CFR
Section 91.117(c). (See 14 CFR Sections 91.117(c) and
91.703.)
3.The phrases “maintain maximum forward speed” and
“maintain slowest practical speed” are primarily intended
for use when sequencing a group of aircraft. As thesequencing plan develops, it may be necessary to
determine the specific speed and/or make specific speed
assignments.
b.To obtain pilot concurrence for a speed
adjustment at or above FL 390, as required bypara 5−7−1, Application, use the following
phraseology.
PHRASEOLOGY −
(Speed adjustment), IF UNABLE ADVISE.
EXAMPLE −
“Reduce speed to one niner zero, if unable advise.”
c.Simultaneous speed reduction and descent can
be extremely difficult, particularly for turbojet
aircraft. Specifying which action is to be accom-
plished first removes any doubt the pilot may have as
to controller intent or priority . Specify which action is
expected first when combining speed reduction with
a descent clearance.
1.Speed reductions prior to descent.
PHRASEOLOGY −
REDUCE SPEED:
TO (specified speed),
or
(number of knots) KNOTS.
THEN, DESCEND AND MAINTAIN (altitude).
2.Speed reduction following descent.
PHRASEOLOGY −
DESCEND AND MAINTAIN (altitude).
THEN, REDUCE SPEED:
TO (specified speed in knots),
or
JO 7110.65W 12/10/15
5−7−3 Speed AdjustmentTO MACH (Mach number),
or
(number of knots) KNOTS.
NOTE−
When specifying descent prior to speed r eduction, consider
the maximum speed requirements specified in 14 CFR
Section 91.117. It may be necessary for the pilot to level off
temporarily and reduce speed prior to descending below10,000 feet MSL.
d.Specify combined speed/altitude fix crossing
restrictions.
PHRASEOLOGY −
CROSS (fix) AT AND MAINTAIN (altitude) AT (specifiedspeed) KNOTS.
EXAMPLE −
“Cross Robinsville at and maintain six thousand at
two three zero knots.”
REFERENCE −
F AAO JO 7110.65, Para 2 −4−17, Numbers Usage.
F AAO JO 7110.65, Para 4 −5−7, Altitude Information.
e.When issuing speed adjustments to aircraft
cleared on procedures with published speed
restrictions specify the point at which the issuedrestriction begins, ends, or changes the published
restrictions.
PHRASEOLOGY −
CROSS (fix/waypoint) AT (speed).
MAINTAIN (speed) UNTIL (fix/waypoint),
THEN (additional instructions).RESUME PUBLISHED SPEED.
COMPLY WITH SPEED RESTRICTIONS.
EXCEPT (if required)
DELETE SPEED RESTRICTIONS.
CLIMB/DESCEND VIA (SID/STAR name and number)
(transition if required.)
NOTE−
1.Aircraft will meet all published speed r estrictions when
on any route or pr ocedure with published speed r estrictions
regardless of climb via or descend via clearance.
2.Due to variations of aircraft types, Flight Management
Systems, and environmental conditions, ATC should
anticipate that aircraft will begin speed adjustments atvarying locations along cleared routes or procedures that
contain published speed restrictions.
3.Issuing speed adjustments to aircraft flying procedures
with published speed restrictions may impact the pilot’ sability to fly the intended flight profile of the procedure.
EXAMPLE −
1.“Cross Alisa at two two zero knots, then climb via the
TIMMY One departure.”
NOTE−
The aircraft will maintain the ATC assigned speed untilAlisa waypoint and will then comply with the speed
restrictions on the TIMMY One departure
EXAMPLE −
2. “Cross Alisa at one zero thousand, then climb via the
TIMMY One departure, except maintain two two zero
knots.”
NOTE−
The aircraft will maintain the ATC assigned speed of two
two zero knots and will not meet any published speed
restrictions. Aircraft will meet all published altituderestrictions after Alisa.
EXAMPLE −
3. “Maintain two two zero knots until BALTR then resume
published speed.”
NOTE−
The ATC assigned speed assignment of two two zero knots
would apply until BALTR. The aircraft would then comply
with the published speed restrictions.
EXAMPLE −
4. “Descend via the KEPEC Two arrival, except after
NIPZO maintain one eight zero knots.”
NOTE−
The aircraft will comply with all published restrictions.After NIPZO, the aircraft will continue to comply with
altitude r estrictions, but will comply with the ATC assigned
speed adjustment.
REFERENCE −
FAAO JO 7110.65, Para 2417, Numbers Usage
FAAO JO 7110.65, Para 457, Altitude InformationFAAO JO 7110.65, Para 571, Application
5−7−3. MINIMA
When assigning airspeeds, use the following
recommended minima:
a.To aircraft operating between FL 280 and
10,000 feet, a speed not less than 250 knots or the
equivalent Mach number.
NOTE−
1.On a standard day the Mach numbers equivalent to
250 knots CAS (subject to minor variations) are:FL 240−0.6
JO 7110.65W 12/10/15
5−7−4 Speed AdjustmentFL 250−0.61
FL 260−0.62
FL 270−0.64
FL 280−0.65
FL 290−0.66.
2.If a pilot is unable to comply with the speed assignment,
the pilot will advise.
b.When an operational advantage will be
realized, speeds lower than the recommendedminima may be applied.
c.To arrival aircraft operating below 10,000 feet:
1.Turbojet aircraft. A speed not less than
210 knots; except when the aircraft is within 20 flying
miles of the runway threshold of the airport ofintended landing, a speed not less than 170 knots.
2.Reciprocating engine and turboprop aircraft.
A speed not less than 200 knots; except when theaircraft is within 20 flying miles of the runway
threshold of the airport of intended landing, a speed
not less than 150 knots.
d.Departures:
1.Turbojet aircraft. A speed not less than
230 knots.
2.Reciprocating engine and turboprop aircraft.
A speed not less than 150 knots.
e.Helicopters. A speed not less than 60 knots.
REFERENCE −
F AAO JO 7110.65, Para 5 −7−2, Methods.
5−7−4. TERMINATION
Advise aircraft when speed adjustments are no longer
needed.
a.Advise aircraft to “resume normal speed” when
ATC-assigned speed adjustments are no longer
required and no published speed restrictions apply.PHRASEOLOGY −
RESUME NORMAL SPEED.
NOTE−
“Resume normal speed” is only used where there is nounderlying published speed restriction. It does not delete
speed r estrictions on upcoming segments of flight and does
not relieve the pilot of those speed restrictions which areapplicable to 14 CFR Section 91.117.
b.Instruct aircraft to “comply with speed
restrictions” applicable to the charted procedure or
route being flown.
PHRASEOLOGY −
COMPLY WITH SPEED RESTRICTIONS
NOTE−
The phraseology “comply with restrictions” requirescompliance with all altitude and/or speed restrictionsdepicted on the procedure.
REFERENCE −
F AAO JO 7110.65, Para 5-6-2, Methods
c.Advise aircraft to “resume published speed”
when aircraft have been assigned an unpublished
speed and ATC wants aircraft to meet subsequentpublished speed restrictions on the route or
procedure.
PHRASEOLOGY −
RESUME PUBLISHED SPEED
REFERENCE −
F AAO JO 7110.65, Para 4-5-7, Altitude Information
d.Advise aircraft when either A TC assigned speed
adjustments or published speed restrictions are no
longer required.
PHRASEOLOGY −
DELETE SPEED RESTRICTIONS
NOTE−
When deleting published restrictions, ATC must ensure
obstacle clearance until aircraft ar e established on a r oute
where no published r estrictions apply. This does not r elieve
the pilot of those speed restrictions which are applicable to
14 CFR Section 91.117.
REFERENCE −
F AAO JO 7110.65, Para 5-7-1, Application
JO 7110.65W 12/10/15
5−8−1 Radar DeparturesSection 8. Radar Departures
5−8−1. PROCEDURES
Use standard departure routes and channelized
altitudes whenever practical to reduce coordination.Do not, however, assign these routes solely to provide
for possible radar or communication failure.
5−8−2. INITIAL HEADING
a.Before departure, assign the initial heading to be
flown if a departing aircraft is to be vectoredimmediately after takeoff.
PHRASEOLOGY −
FLY RUNWAY HEADING.TURN LEFT/RIGHT, HEADING (degrees).
NOTE−
TERMINAL. A purpose for the heading is not necessary,since pilots operating in a radar environment associate
assigned headings with vectors to their planned route of
flight.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−2, Departure Clearances.
F AAO JO 7110.65, Para 5 −6−3, Vectors Below Minimum Altitude.
b.When conducting simultaneous parallel run-
way departures utilizing RNA V SIDs, advise aircraft
of the initial fix/waypoint on the RNA V route.
PHRASEOLOGY −
RNAV to (fix/waypoint), RUNWAY (number), CLEARED
FOR TAKEOFF .
EXAMPLE −
“RNAV to MP ASS, Runway Two −Six Left, cleared for
takeoff.”
NOTE−
1.TERMINAL. A purpose for an initial waypoint advisory
is not necessary since pilots associate this advisory with theflight path to their planned r oute of flight. Pilots must
immediately advise ATC if a different RNAV SID is entered
in the aircraft FMS.
2.The SID transition is not restated as it is contained in the
ATC clearance.
3.Aircraft cleared via RNAV SIDs designed to begin with
a vector to the initial waypoint are assigned a headingbefore departure.
REFERENCE −
F AAO JO 7110.65, Para 3-9-9, Takeoff ClearanceF AAO JO 7110.65, Para 4-3-2, Departure Clearances
AIM, Para 5 −2−7. Departure Control
5−8−3. SUCCESSIVE OR SIMULTANEOUS
DEPARTURES
TERMINAL
Separate aircraft departing from the same airport/
heliport or adjacent airports/heliports in accordance
with the following minima provided radar identifica-
tion with the aircraft will be established within 1 mile
of the takeoff runway end/helipad and courses will
diverge by 15 degrees or more.
NOTE−
1.F AAO 8260.46, Departure Procedure (DP) Program,
and F AAO 8260.3, United States Standard for TerminalInstrument Procedures (TERPS), Volume 4, establishesguidelines for IFR departure turning procedures which
assumes a climb to 400 feet above the departure end of
runway (DER) elevation before a turn is commenced.TERPS criteria ensures obstacle clearance with a climbgradient of 200 feet per nautical mile from the DER.“Immediately after departure” is considered to be any turn
that provides at least 15 degrees of divergence that
commences no later than 2 miles from the DER.
2.Consider known aircraft performance characteristics
when applying initial separation to successive departingaircraft.
3.When one or both of the departure surfaces is a helipad,
use the takeoff course of the helicopter as a reference,
comparable to the centerline of a runway and the helipadcenter as the threshold.
a.Between aircraft departing the same runway/
helipad or parallel runways/helicopter takeoff
courses separated by less than 2,500 feet − 1 mile if
courses diverge by 15 degrees or more immediately
after departure or 10 degrees or more when both
aircraft are departing the same runway and both areflying an RNA V SID. (See FIG 5 −8−1, FIG 5−8−2,
and FIG 5 −8−3.)
NOTE−
RNAV SIDs specific to this paragraph are those SIDsconstructed with a specific lateral path that begins at the
DER.
JO 7110.65W 12/10/15
5−8−2 Radar DeparturesFIG 5−8−1
Successive Departures
FIG 5−8−2
Simultaneous Departures
FIG 5−8−3
Simultaneous Departures
NOTE−
This procedure does not apply when wake turbulence
separation is required.
REFERENCE −
F AAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures.
F AAO JO 7110.65, Para 3 −9−8, Intersecting Runway/Intersecting
Flight Path Operations.
F AAO JO 7110.65, Para 5 −5−4, Minima.
FAAO JO 7110.65, Para 554, Minima, Subparagraph g.b.Between aircraft departing from diverging
runways:
1.Nonintersecting runways. Authorize simul-
taneous takeof fs if runways diverge by 15 degrees or
more. (See FIG 5−8−4.)
FIG 5−8−4
Nonintersecting Runway Departures
2.Intersecting runways and/or helicopter
takeoff courses which diverge by 15 degrees or
more. Authorize takeoff of a succeeding aircraftwhen the preceding aircraft has passed the point of
runway and/or takeoff course intersection. When
applicable, apply the procedure in para 3 −9−5,
Anticipating Separation. (See FIG 5 −8−5 and
FIG 5−8−6.)
FIG 5−8−5
Intersecting Runway Departures
NOTE−
This procedure does not apply when wake turbulence
separation is required.
REFERENCE −
F AAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
JO 7110.65W 12/10/15
5−8−3 Radar DeparturesFIG 5−8−6
Intersecting Helicopter Course Departures
c.Between aircraft departing in the same direction
from parallel runways/helicopter takeoff courses.
Authorize simultaneous takeoffs if the centerlines/
takeoff courses are separated by at least 2,500 feet and
courses diverge by 15 degrees or more immediatelyafter departure or 10 degrees or more when both
aircraft are flying an RNA V SID. (See FIG 5 −8−7 and
FIG 5−8−8.)
NOTE−
RNAV SIDs specific to this paragraph are those SIDs
constructed with a specific lateral path that begins at the
DER.
FIG 5−8−7
Parallel Runway Departures
FIG 5−8−8
Parallel Helicopter Course Departures
5−8−4. DEPARTURE AND ARRIVAL
TERMINAL. Except as provided in para 5 −8−5,
Departures and Arrivals on Parallel or Nonintersect-
ing Diverging Runways, separate a departing aircraft
from an arriving aircraft on final approach by aminimum of 2 miles if separation will increase to a
minimum of 3 miles (5 miles when 40 miles or more
from the antenna) within 1 minute after takeoff.
NOTE−
1.This procedure permits a departing aircraft to be
released so long as an arriving aircraft is no closer than2 miles from the runway at the time. This separation isdetermined at the time the departing aircraft commences
takeoff roll.
2.Consider the effect surface conditions, such as ice,
snow, and other pr ecipitation, may have on known air craft
performance characteristics, and the influence theseconditions may have on the pilot’ s ability to commence
takeoff roll in a timely manner.
5−8−5. DEPARTURES AND ARRIVALS ON
PARALLEL OR NONINTERSECTING
DIVERGING RUNWAYS
TERMINAL. Authorize simultaneous operations
between an aircraft departing on a runway and an
aircraft on final approach to another parallel or
nonintersecting diverging runway if the departurecourse diverges immediately by at least 30 degrees
from the missed approach course until separation is
applied an d provided one of the following conditions
are met:
NOTE−
When one or both of the takeoff/landing surfaces is ahelipad, consider the helicopter takeoff course as the
runway centerline and the helipad center as the threshold.
JO 7110.65W 12/10/15
5−8−4 Radar Departuresa.When parallel runway thresholds are even, the
runway centerlines are at least 2,500 feet apart.
(See FIG 5−8−9 and FIG 5−8−10.)
FIG 5−8−9
Parallel Thresholds are Even
FIG 5−8−10
Parallel Thresholds are Even
b.When parallel runway thresholds are staggered
and:
1.The arriving aircraft is approaching the
nearer runway: the centerlines are at least 1,000 feetapart and the landing thresholds are staggered at least
500 feet for each 100 feet less than 2,500 the
centerlines are separated. (See FIG 5 −8−11 and
FIG 5−8−12.)FIG 5−8−11
Parallel Thresholds are Staggered
FIG 5−8−12
Parallel Thresholds are Staggered
NOTE−
In the event of a missed appr oach by an air craft requiring
wake turbulence separation behind it, apply the pr ocedures
in Para 3-9-6, Same Runway Separation, Para 3-9-8,
Intersecting Runway/Intersecting Flight Path Operations,
ensure that the lar ger aircraft does not overtake or cross in
front of an aircraft departing from the adjacent parallel
runway.
REFERENCE −
F AAO JO 7110.65, Para 5-5-4, Minima, Subparagraph f.
2.The arriving aircraft is approaching the
farther runway: the runway centerlines separationexceeds 2,500 feet by at least 100 feet for each
JO 7110.65W 12/10/15
5−8−5 Radar Departures500 feet the landing thresholds are staggered.
(See FIG 5−8−13.)
FIG 5−8−13
Parallel Thresholds are Staggered
c.When nonintersecting runways diverge by
15 degrees or more and runway edges do not touch.(See FIG 5−8−14.)FIG 5−8−14
Diverging Nonintersecting Runways
d.When the aircraft on takeoff is a helicopter, hold
the helicopter until visual separation is possible or
apply the separation criteria in subparas a, b, or c.
REFERENCE −
F AAO JO 7110.65, Para 5 −8−4, Departure and Arrival.
JO 7110.65W 12/10/15
5−9−1 Radar ArrivalsSection 9. Radar Arrivals
5−9−1. VECTORS TO FINAL APPROACH
COURSE
Except as provided in para 7−4−2, Vectors for Visual
Approach, vector arriving aircraft to intercept thefinal approach course:
a.At least 2 miles outside the approach gate unless
one of the following exists:
1.When the reported ceiling is at least 500 feet
above the MV A/MIA and the visibility is at least
3 miles (report may be a PIREP if no weather is
reported for the airport), aircraft may be vectored tointercept the final approach course closer than 2 miles
outside the approach gate but no closer than the
approach gate.
2.If specifically requested by the pilot, aircraft
may be vectored to intercept the final approachcourse inside the approach gate but no closer than the
final approach fix.
EXCEPTION. Conditions 1 and 2 above do not
apply to RNA V aircraft being vectored for a GPS or
RNA V approach.
b.Provide a minimum of 1,000 feet vertical
separation between aircraft on opposite base legsunless another form of approved separation is
established during turn-on to final approach.
c.For a precision approach, at an altitude not
above the glideslope/glidepath or below the
minimum glideslope intercept altitude specified onthe approach procedure chart.
d.For a nonprecision approach, at an altitude
which will allow descent in accordance with the
published procedure.
NOTE−
A pilot request for an “evaluation approach,” or a“coupled approach,” or use of a similar term, indicates the
pilot desires the application of subparas a and b.
e.EN ROUTE. The following provisions are
required before an aircraft may be vectored to the
final approach course:
1.The approach gate and a line (solid or
broken), depicting the final approach course starting
at or passing through the approach gate and extendingaway from the airport, be displayed on the radarscope; for a precision approach, the line length must
extend at least the maximum range of the localizer;
for a nonprecision approach, the line length must
extend at least 10NM outside the approach gate; and
2.The maximum range selected on the radar
display is 150 NM; or
3.An adjacent radar display is set at 125 NM or
less, configured for the approach in use, and is
utilized for the vector to the final approach course.
4.If unable to comply with subparas 1, 2, or 3
above, issue the clearance in accordance with
Para 4−8−1, Approach Clearance.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−1, Approach Clearance.
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
5−9−2. FINAL APPROACH COURSE
INTERCEPTION
a.Assign hea dings that will permit final approach
course interception on a track that does not exceed the
interception angles specified in TBL 5 −9−1.
TBL 5−9−1
Approach Course Interception Angle
Distance from interception
point to approach gateMaximum interception
angle
Less than 2 miles or triplesimultaneous approaches in
use20 degrees
2 miles or more 30 degrees (45 degrees for helicopters)
b.If deviations from the final approach course are
observed after initial course interception, apply the
following:
1.Outside the approach gate: apply procedures
in accordance with subpara a, if necessary, vector the
aircraft for another approach.
2.Inside the approach gate: inform the pilot of
the aircraft’s position and ask intentions.
PHRASEOLOGY −
(Ident) (distance) MILE(S) FROM THE AIRPORT,(distance) MILE(S) RIGHT/LEFT OF COURSE, SAYINTENTIONS.
NOTE−
The intent is to provide for a track course intercept anglejudged by the controller to be no greater than specified by
this procedure.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−9−2 Radar ArrivalsREFERENCE −
F AAO JO 7110.65, Chapter 5, Section 9, Radar Arrivals, andSection 10, Radar Appr oaches− Terminal.
c.EN ROUTE. When using a radar scope range
above 125 NM, the controller must solicit and receive
a pilot report that the aircraft is established on thefinal approach course. If the pilot has not reported
established by the final approach gate, inform the
pilot of his/her observed position and ask intentions.
NOTE−
It may be difficult to accurately determine small distances
when using very large range settings.
5−9−3. VECTORS ACROSS FINAL
APPROACH COURSE
Inform the aircraft whenever a vector will take it
across the final approach course and state the reason
for such action.
NOTE−
In the event you are unable to so inform the aircraft, the
pilot is not expected to turn inbound on the final approach
course unless approach clearance has been issued.
PHRASEOLOGY −
EXPECT VECTORS ACROSS FINAL FOR (purpose).
EXAMPLE −
“EXPECT VECTORS ACROSS FINAL FOR SP ACING.”
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
5−9−4. ARRIVAL INSTRUCTIONS
Issue all of the following to an aircraft before it
reaches the approach gate:
a.Position relative to a fix on the final approach
course. If none is portrayed on the radar display or if
none is prescribed in the procedure, issue positioninformation relative to the navigation aid which
provides final approach guidance or relative to the
airport.
b.Vector to intercept the final approach course if
required.
c.Approach clearance except when conducting a
radar approach. Issue approach clearance only after
the aircraft is:1.Established on a segment of a published route
or instrument approach procedure, or s
ee FIG 5−9−1
Example 1.
FIG 5−9−1
Arrival Instructions
JO 7110.65W 12/10/15
5−9−3 Radar ArrivalsEXAMPLE −
1.Aircraft 1 was vectored to the final approach course but
clearance was withheld. It is now at 4,000 feet and
established on a segment of the instrument approach
procedure. “Seven miles from X-RAY. Cleared I −L−S
runway three six approach.” (See FIG 5−9−1.)
2.Aircraft 2 is being vectored to a published segment of
the final approach course, 4 miles from LIMA at 2,000 feet.
The MVA for this area is 2,000 feet. “Four miles fromLIMA. Turn right heading three four zero. Maintain
two thousand until established on the localizer. Cleared
I−L−S runway three six approach.” (See FIG 5−9−1.)
3.Aircraft 3 is being vectored to intercept the final
approach course beyond the approach segments, 5 miles
from Alpha at 5,000 feet. the MVA for this area is 4,000 feet.
“Five miles from Alpha. Turn right heading three threezero. Cross Alpha at or above four thousand. Cleared
I−L−S runway three six approach.” (See FIG 5−9−1.)
4.Aircraft 4 is established on the final approach course
beyond the approach segments, 8 miles from Alpha at6,000 feet. The MVA for this area is 4,000 feet. “Eight miles
from Alpha. Cross Alpha at or above four thousand.
Cleared I−L−S runway three six approach.”
(See FIG 5−9−1.)
2.Assigned an altitude to maintain until the
aircraft is established on a segment of a published
route or instrument approach procedure.FIG 5−9−2
Arrival Instruction s
EXAMPLE −
The aircraft is being vectored to the intermediate fix
FORRE for an RNAV approach. “Seven miles fromFOORE, cleared direct FORRE, cr oss FORRE at or above
four thousand, cleared RNAV runway one eightapproach.”
NOTE−
1.The altitude assigned must assure IFR obstruction
clearance from the point at which the approach clearance
is issued until established on a segment of a published r oute
or instrument approach procedure.
2.If the altitude assignment is VFR-on-top, it is
conceivable that the pilot may elect to remain high until
arrival over the final approach fix which may require thepilot to circle to descend so as to cross the final approach
fix at an altitude that would permit landing.
3.Aircraft being vectored to the intermediate fix in
FIG 5−9−2 must meet all the provisions described in
subpara 4 −8−1h2.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−9−4 Radar Arrivalsd.Instructions to do one of the following:
NOTE−
The principal purpose of this paragraph is to ensure thatfrequency changes are made prior to passing the finalapproach fix. However, at times it will be desirable to r etain
an aircraft on the approach control frequency to provide a
single-frequency approach or other radar services. Whenthis occurs, it will be necessary to relay tower clearancesor instructions to preclude changing frequencies prior tolanding or approach termination.
1.Monitor local control frequency, reporting to
the tower when over the approach fix.
2.Contact the tower on local control frequency.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−8, Communications Release.
3.Contact the final controller on the appropriate
frequency if radar service will be provided on final on
a different frequency.
REFERENCE −
F AAO JO 7110.65, Para 5 −10−8, Final Controller Changeover.
4.When radar is used to establish the final
approach fix, inform the pilot that after being advised
that he/she is over the fix he/she is to contact the tower
on local control frequency.
EXAMPLE −
“Three miles from final approach fix. Turn left heading
zero one zero. Maintain two thousand until established onthe localizer. Cleared I −L−S runway three six approach. I
will advise when over the fix.”
“Over final approach fix. Contact tower one one eight
point one.”
NOTE−
ARSR may be used for establishment of initial approachand intermediate approach fixes only. ASR must be used to
establish the final approach fix.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −9−7, Simultaneous Independent
Appr oaches− Dual & T riple.
e.Where a T erminal Arrival Area (TAA) has been
established to support RNA V approaches, inform the
aircraft of its position relative to the appropriate IAF
and issue the approach clearance. (See FIG 5−9−3.)
EXAMPLE −
1.Aircraft 1: The aircraft is in the straight in area of the
TAA. “Seven miles from CENTR, Cleared R −NAV Runway
One Eight Approach.”2.Aircraft 2: The aircraft is in the left base area of the TAA.
“One five miles from LEFTT, Cleared R-NAV Runway One
Eight Approach.”
3.Aircraft 3: The aircraft is in the right base area of the
TAA. “Four miles from RIGHT, Cleared R-NAV Runway
One Eight Approach.”
FIG 5−9−3
Basic “T” Design
5−9−5. APPROACH SEPARATION
RESPONSIBILITY
a.The radar controller performing the approach
control function is responsible for separation of radar
arrivals unless visual separation is provided by the
tower, or a letter of agreement/facility directiveauthorizes otherwise. Radar final controllers ensure
that established separation is maintained between
aircraft under their control and other aircraftestablished on the same final approach course.
NOTE−
The radar controller may be a controller in an ARTCC, a
terminal facility, or a tower controller when authorized to
perform the approach control function in a terminal area.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−9−5 Radar ArrivalsREFERENCE −
F AAO JO 7110.65, Para 2 −1−19, Wake Turbulence.
F AAO JO 7110.65, Section 5, Radar Separation, Para 5 −5−1,
Application.
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
F AAO JO 7110.65, Para 5 −5−4, Minima.
F AAO JO 7210.3, Para 2 −1−15, Authorization for Separation Services
by Towers.
b.When timed approaches are being conducted,
the radar controller must maintain the radarseparation specified in Para 6 −7−5, Interval Minima,
until the aircraft is observed to have passed the final
approach fix inbound (nonprecision approaches) orthe OM or the fix used in lieu of the outer marker
(precision approaches) and is within 5 miles of the
runway on the final approach course or until visualseparation can be provided by the tower.
REFERENCE −
F AAO JO 7110.65, Para 5 −4−6, Receiving Controller Handoff.
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −9−6, Parallel Dependent Approaches.
F AAO JO 7110.65, Para 6 −7−2, Approach Sequence.
5−9−6. SIMULTANEOUS DEPENDENT
APPROACHES
TERMINAL
a.Apply the following minimum separation when
conducting simultaneous dependent approaches:
1.Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft during turn on.
2.Provide a minimum of 1 mile radar separation
diagonally between successive aircraft on adjacent
final approach courses when runway centerlines are
at least 2,500 feet but no more than 3,600 feet apart.
FIG 5−9−4
Simultaneous Dependent Approaches
EXAMPLE −
In FIG 5−9−4, Aircraft 2 is 1.0 mile from Aircraft 1.
Approved radar separation must be maintained between
Aircraft 1 and Aircraft 3.
3.Provide a minimum of 1.5 miles radar
separation diagonally between successive aircraft on
adjacent final approach courses when runway
centerlines are more than 3,600 feet but no more than
4,300 feet apart.
FIG 5−9−5
Simultaneous Dependent Approaches
5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−9−6 Radar ArrivalsEXAMPLE −
In FIG 5−9−5, Aircraft 2 is 1.5 miles from Aircraft 1, and
Aircraft 3 is 1.5 miles or more from Aircraft 2. Approved
radar separation must be maintained between aircraft on
the same final.
4.Provide a minimum of 2 miles radar
separation diagonally between successive aircraft on
adjacent final approach courses where runway
centerlines are more than 4,300 feet but no more than
9,000 feet apart.
FIG 5−9−6
Simultaneous Dependent Approaches
EXAMPLE −
In FIG 5−9−6, Aircraft 2 is 2 miles from heavy Aircraft 1.
Aircraft 3 is a small aircraft and is 6 miles from Air craft 1.
*The resultant separation between Aircraft 2 and 3 is atleast 4.2 miles.
5.Provide the minimum approved radar separa-
tion between aircraft on the same final approachcourse.
REFERENCE −
F AAO JO 7110.65, Section 5, Radar Separation, Para 5 −5−4 , Minima.
b.The following conditions are required when
applying the minimum radar separation on adjacent
final approach courses allowed in subparagraph a:
NOTE−
1.Simultaneous dependent approaches involving an
RNAV approach may only be conducted when (GPS)
appears in the approach title or a chart note states thatGPS is required.2.Simultaneous dependent approaches may only be
conducted where instrument approach charts specificallyauthorize simultaneous approaches to adjacent runways.
1.Apply this separation standard only after
aircraft are established on the parallel final approach
course.
2.Straight-in landings will be made.
3.Missed approach procedures do not conflict.
4.Aircraft are informed that approaches to both
runways are in use. This information may be pr ovided
through the ATIS.
5.Approach control must have the interphone
capability of communicating directly with the local
controller at locations where separationresponsibility has not been delegated to the tower.
NOTE−
The interphone capability is an integral part of this
procedure when approach control has the sole separationresponsibility.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−5 , Approach Separation Responsibility.
F AAO JO 7210.3, Para 2 −1−15, Authorization for Separation Services
by Towers.
c.Consideration should be given to known factors
that may in any way af fect the safety of the instrument
approach phase of flight, such as surface winddirection and velocity, wind shear alerts/reports,
severe wea ther activity, etc. Closely monitor weather
activity that could impact the final approach course.
Weather conditions in the vicinity of the final
approach course may dictate a change of approach in
use.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2 , Final Approach Course Interception.
5−9−7. SIMULTANEOUS INDEPENDENT
APPROACHES − DUAL & TRIPLE
TERMINAL
a.Apply the following minimum separation when
conducting simultaneous independent approaches:
1.Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft during turn-on to parallel final approach.
NOTE−
1.During triple parallel approaches, no two aircraft will
be assigned the same altitude during turn-on. All
three aircraft will be assigned altitudes which differ by a
minimum of 1,000 feet. Ex ample: 3,000, 4,000, 5,000;
7,000, 8,000, 9,000.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−9−7 Radar Arrivals2.Communications transfer to the tower controller’ s
frequency must be completed prior to losing verticalseparation between aircraft.
2.Dual parallel runway centerlines are at least
3,600 feet apart, or dual parallel runway centerlines
are at least 3,000 feet apart with a 2.5 /C0095 to 3.0 /C0095 offset
approach to either runway and the airport field
elevation is 2,000 feet MSL or less.
NOTE−
Airport field elevation requirement does not apply to dualparallel runways that are 4,300 feet or more apart.
3.Triple parallel approaches may be conducted
under one of the following conditions:
(a)Parallel runway centerlines are at least
3,900 feet apart and the airport field elevation is 2,000
feet MSL or less; or
(b)Parallel runway centerlines are at least
3,000 feet apart, a 2.5 /C0095 to 3.0 /C0095 offset approach to both
outside runways, and the airport field elevation is2,000 feet MSL or less; or
(c)Parallel runway centerlines are at least
3,000 feet apart, a single 2.5 /C0095 to 3.0 /C0095 offset approach
to either outside runway while parallel approaches to
the remaining two runways are separated by at least
3,900 feet, and the airport field elevation is 2,000 feet
MSL or less.
4.Provide the minimum applicable radar
separation between aircraft on the same finalapproach course.
b.A color digital display set to a 4 to 1 (4:1) aspect
ratio (AR) with visual and aural alerts, such as theSTARS final monitor aid (FMA), and a surveillance
update rate at least 4.8 seconds must be used to
monitor approaches where:
1.Dual parallel runway centerlines are at least
3,000 and no more than 4,300 feet apart.
2.Triple parallel runway centerlines are at least
3,000 but less than 5,000 feet apart and the airport
field elevation is 2,000 feet MSL or less.
3.Triple parallel approaches to airports where
the airport field elevation is more than 2,000 feet
MSL require use of the FMA system and an approved
FAA aeronautical study.
NOTE−
FMA is not required to monitor the NTZ for runway
centerlines greater than 4,300 feet for dual runways, and5,000 feet or greater for triple operations.c.FUSION must be discontinued on the FMA
displays and set to a single-sensor, when conducting
final monitoring activities.
REFERENCE −
F AAO JO 7110.65, Para 5 −5−4 , Minima.
d.The following conditions must be met when
conducting dual or triple simultaneous independent
approaches:
NOTE−
Simultaneous independent approaches may only beconducted where instrument approach charts specifically
authorize simultaneous approaches.
REFERENCE −
F AAO JO 7210.3, Para 10-4-6, Simultaneous Approaches
(Dependent/Independent)
1.Straight-in landings will be made.
2.All appropriate communication, navigation,
and surveillance systems are operating normally.
3.Inform aircraft that simultaneous
independent approaches are in use, or when runway
centerlines are less than 4,300 feet PRM approaches
are in use, prior to aircraft departing an outer fix. Thisinformation may be provided through the ATIS.
REFERENCE −
P/CG Term − Precision Runway Monitor (PRM) System.
4.Clear the aircraft to descend to the
appropriate glideslope/glidepath intercept altitudesoon enough to provide a period of level flight to
dissipate excess speed. Provide at least 1 mile of
straight flight prior to the final approach courseintercept.
NOTE−
Not applicable to approaches with RF legs.
5.An NTZ at least 2,000 feet wide is established
an equal distance between extended runway final
approach courses and must be depicted on the
monitor display. The primary responsibility for
navigation on the final approach course rests with the
pilot. Control instructions and information are issued
only to ensure separation between aircraft and to
prevent aircraft from penetrating the NTZ.
6.Monitor all approaches regardless of weather.
Monitor local control frequency to receive any
aircraft transmission. Issue control instructions asnecessary to ensure aircraft do not enter the NTZ.
NOTE−
1.Separate monitor controllers, each with transmit/
receive and override capability on the local controlfrequency, must ensure aircraft do not penetrate the5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−9−8 Radar Arrivalsdepicted NTZ. Facility dir ectives must define r esponsibility
for providing the minimum applicable longitudinalseparation between aircraft on the same final approachcourse.
2.The aircraft is considered the center of the primary
radar return for that aircraft, or, if an FMA or other color
final monitor aid is used, the center of the digitized target
of that aircraft, for the purposes of ensuring an aircraft
does not penetrate the NTZ. The provisions of para 5 −5−2,
Target Separation, apply also.
e.The following procedures must be used by the
final monitor controllers:
1.Instruct the aircraft to return to the correct
final approach course when aircraft are observed to
overshoot the turn-on or to continue on a track which
will penetrate the NTZ.
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACHCOURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO THE FINAL APPROACH COURSE,
orTURN (left/right) AND RETURN TO THE FINALAPPROACH COURSE.
2. Instruct aircraft on the adjacent final
approach course to alter course to avoid the deviating
aircraft when an aircraft is observed penetrating or in
your judgment will penetrate the NTZ.
PHRASEOLOGY −
TRAFFIC ALERT, (call sign), TURN (right/left)
IMMEDIATELY HEADING (degrees), CLIMB ANDMAINTAIN (altitude).
3.Terminate radar monitoring when one of the
following occurs:
(a)Visual separation is applied.
(b)The aircraft reports the approach lights or
runway in sight.
(c)The aircraft is 1 mile or less from the
runway threshold, if procedurally required and
contained in facility directives.
4.Do not inform the aircraft when radar
monitoring is terminated.
5.Do not apply the provisions of Paragraph
5-13-1, Monitor on PAR Equipment, for simultan-
eous independent approaches.
f.Consideration should be given to known factors
that may in any way af fect the safety of the instrument
approach phase of flight when simultaneousindependent approaches are being conducted to
parallel runways. Factors include, but are not limited
to, wind direction/velocity, windshear alerts/reports,
severe weather activity, etc. Closely monitor weather
activity that could impact the final approach course.Weather conditions in the vicinity of the final
approach course may dictate a change of approach in
use.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−13 , Radar Service Termination.
F AAO JO 7110.65, Para 5 −9−2 , Final Approach Course Interception.
5−9−8. SIMULTANEOUS INDEPENDENT
CLOSE PARALLEL APPROACHES –PRECI-
SION RUNWAY MONITOR (PRM)APPROACHES
TERMINAL
a.PRM approaches may only be conducted when
charted in the approach title, and where instrument
approach charts specifically authorize simultaneous
approaches.
REFERENCE −
P/CG- Precision Runway Monitor (PRM) System
P/CG-Simultaneous Close Parallel Approaches
b.PRM approaches must be assigned when
conducting instrument approaches to dual and triple
parallel runways with runway centerlines separatedby less than 4,300 feet.
c.Provide a minimum of 1,000 feet vertical or a
minimum of 3 miles radar separation between aircraft
during turn-on to parallel or offset final approach.
NOTE−
Communications transfer to the tower controller’ sfrequency must be completed prior to losing verticalseparation between aircraft.
d.Provide the minimum applicable radar separa-
tion between aircraft on the same final approachcourse.
REFERENCE −
F AAO JO 7110.65, Para 5 −5−4 , Minima.
e.The following conditions must be met when
conducting dual and triple PRM approaches:
1.Straight-in landings will be made.
2.All appropriate communication, navigation,
and surveillance systems are operating normally.
3.Inform aircraft that PRM approaches are in
use prior to aircraft departing an outer fix. This
information may be provided through the ATIS.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−9−9 Radar Arrivals4.Clear the aircraft to descend to the
appropriate glideslope/glidepath intercept altitude
soon enough to provide a period of level flight to
dissipate excess speed. Provide at least 1 mile of
straight flight prior to the final approach courseintercept.
NOTE−
Not applicable to approaches with RF legs.
5.An NTZ at least 2,000 feet wide is established
an equal distance between extended runway finalapproach courses and must be depicted on the
monitor display. The primary responsibility for
navigation on the final approach course rests with the
pilot. Control instructions and information are issued
only to ensure separation between aircraft and to
prevent aircraft from penetrating the NTZ.
6.Monitor all approaches regardless of weather.
Monitor local control frequency to receive any
aircraft transmission. Issue control instructions as
necessary to ensure aircraft do not enter the NTZ.
7.Separate monitor controllers, each with
transmit/receive and override capability on the local
control frequency, must ensure aircraft do notpenetrate the depicted NTZ. Facility directives must
define the responsibility for providing the minimum
applicable longitudinal separation between aircrafton the same final approach course.
NOTE−
The aircraft is considered the center of the digitized targetfor the purposes of ensuring an aircraft does not penetratethe NTZ.
f.The following procedures must be used by the
final monitor controllers:
1.Provide position information to an aircraft
that is (left/right) of the depicted final approach
course centerline, and in your judgment is continuing
on a track that may penetrate the NTZ.
PHRASEOLOGY −
(Aircraft call sign) I SHOW YOU (left/right) OF THE
FINAL APPROACH COURSE.
2.Instruct the aircraft to return immediately to
the correct final approach course when aircraft are
observed to overshoot the turn-on or continue on a
track which will penetrate the NTZ.
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY ANDRETURN TO THE FINAL APPROACH COURSE.or
TURN (left/right) AND RETURN TO THE FINALAPPROACH COURSE.
3.Instruct aircraft on the adjacent final
approach course to alter course to avoid the deviating
aircraft when an aircraft is observed penetrating or in
your judgment will penetrate the NTZ.
NOTE−
An instruction that may include a descent to avoid thedeviating aircraft should only be used when there is noother r easonable option available to the contr oller. In such
a case, the descent must not put the aircraft below the MVA.
PHRASEOLOGY −
TRAFFIC ALERT, (call sign), TURN (left/right)IMMEDIATELY HEADING (DEGREES), CLIMB ANDMAINTAIN (altitude).
4.Terminate radar monitoring when one of the
following occurs:
(a)Visual separation is applied.
(b)The aircraft reports the approach lights or
runway in sight.
(c)The aircraft is 1 mile or less from the
runway threshold, if procedurally required, and
contained in facility directives.
5.Do not inform the aircraft when radar
monitoring is terminated.
6.Do not apply the provisions of Paragraph
5-13-1, Monitor on PAR Equipment, for PRM
approaches.
g.Consideration should be given to known factors
that may in any way af fect the safety of the instrument
approach phase of flight when PRM approaches arebeing conducted to parallel runways. Factors include,
but are not limited to, wind direction/velocity,
windshear alerts/reports, severe weather activity, etc.
Closely monitor weather activity that could impact
the final approach course. Weather conditions in the
vicinity of the final approach course may dictate achange of the approach in use.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−13 , Radar Service Termination.
F AAO JO 7110.65, Para 5 −9−2 , Final Approach Course Interception.
5−9−9. SIMULTANEOUS OFFSET
INSTRUMENT APPROACHES (SOIA) − HIGH
UPDATE RADAR
TERMINAL
a.Simultaneous offset independent approaches
(SOIA) may be conducted at FAA designated5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−9−10 Radar Arrivalsairports that have an authorization issued by the
Director, Operations -Headquarters, AJT-2, in co-
ordination with AFS with parallel runways that have
centerlines separated by less than 3,000 feet with one
final approach course offset by 2.5 to 3.0 degreesusing a high update rate surveillance system with a
1.0−second radar update; and
1.Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft during turn −on to final approaches.
NOTE−
Communications transfer to the tower controller’ sfrequency must be completed prior to losing verticalseparation between aircraft.
2.Provide the minimum applicable radar
separation between aircraft on the same final
approach course.
3.Provide the minimum applicable radar
separation between the trailing offset aircraft of a
leading SOIA pair and the lead straight-in aircraft inthe subsequent SOIA pair when the parallel runways
have centerlines separated by less than 2,500 feet.
REFERENCE −
F AAO JO 7110.65, Para 5 −5−4 , Minima.
b.The following conditions are required when
applying the minimum separation between lead
straight-in and offset trailing approaches with
glideslope courses or vertical navigation authorized
in subparagraph a above:
1.Straight−in landings will be made.
2.All appropriate communication, navigation,
and surveillance systems are operating normally.
3.Inform aircraft that PRM approaches are in
use prior to aircraft departing an outer fix. This
information may be provided through the ATIS.
4.Clear the aircraft to descend to the
appropriate glideslope/glidepath intercept altitude
soon enough to provide a period of level flight to
dissipate excess speed. Provide at least 1 mile ofstraight flight prior to the final approach course
intercept.
NOTE−
Not applicable to approaches with RF legs.
5.A No Transgression Zone (NTZ) at least
2,000 feet wide is established an equal distance
between extended runway final approach courses and
must be depicted on the monitor display. The NTZbegins prior to the point where adjacent inbound
aircraft first lose vertical separation and extends to a
point coincident with the location of the offset
approach MAP. The primary responsibility for
navigation on the final approach course rests with the
pilot. Control instructions and information are issued
only to ensure separation between aircraft and to
prevent aircraft from penetrating the NTZ.
6.Monitor all approaches regardless of weather.
Monitor local control frequency to receive any
aircraft transmission. Issue control instructions as
necessary to ensure aircraft do not enter the NTZ.
7.Separate monitor controllers, each with
transmit/receive and override capability on the local
control frequency, must ensure aircraft do not
penetrate the depicted NTZ. Facility directives mustdefine the responsibility for providing the minimum
applicable longitudinal separation between aircraft
on the same final approach course and the minimumapplicable longitudinal separation between the
trailing offset aircraft of a leading SOIA pair and the
lead straight in aircraft in the subsequent SOIA pairwhen the parallel runways have centerlines separated
by less than 2,500 feet.
NOTE−
The aircraft is considered the center of the digitized targetfor that aircraft for the purposes of ensuring an aircraft
does not penetrate the NTZ.
c.The following procedures must be used by the
final monitor controllers:
1.Provide position information to an aircraft
that is (left/right) of the depicted final approach
course centerline, and in your judgment is continuing
on a track that may penetrate the NTZ.
PHRASEOLOGY −
(Aircraft call sign) I SHOW YOU (left/right) OF THE
FINAL APPROACH COURSE.
2.Instruct the aircraft to return immediately to
the correct final approach course when aircraft are
observed to overshoot the turn −on or continue on a
track which will penetrate the NTZ.
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY ANDRETURN TO FINAL APPROACH COURSE.
or
TURN (left/right) AND RETURN TO THE FINALAPPROACH COURSE.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−9−11 Radar Arrivals3.Instruct aircraft on the adjacent final
approach course to alter course to avoid the deviating
aircraft when an aircraft is observed penetrating or in
your judgment will penetrate the NTZ.
NOTE−
An instruction that may include a descent to avoid the
deviating aircraft should only be used when there is no
other r easonable option available to the contr oller. In such
a case, the descent must not put the aircraft below the MVA.
PHRASEOLOGY −
TRAFFIC ALERT, (call sign), TURN (left/right)
IMMEDIATELY HEADING (DEGREES), CLIMB ANDMAINTAIN (altitude).
4.Terminate radar monitoring when one of the
following occurs:
(a)The lead straight in aircraft passes the end
of the NTZ nearest the runway threshold.
(b)The trailing offset aircraft passes the end
of the NTZ nearest the runway threshold and has
reported the lead straight in aircraft in sight.
(c)The aircraft begins the visual segment of
the approach.
5.Do not inform the aircraft when radar
monitoring is terminated.
6.Do not apply the provisions of paragraph
5-13-1, Monitor on PAR Equipment, for simultan-
eous approaches.
d.Advise the pilot of the trailing offset aircraft of
traffic on the adjacent lead straight-in approachcourse, if that traffic will be a factor in the visual
segment of the approach. The provisions of
Paragraphs 7-2-1, Visual Separation, subparagrapha2, concerning visual separation between aircraft
being provided by the tower must not be applied to
aircraft conducting SOIAs.
NOTE−
Once advised, the pilot is authorized to continue past theoffset approach MAP if all of the following conditions aremet: The pilot has the straight-in approach traffic in sight
and expects the traffic to remain in sight; the pilot advises
ATC that the traffic is in sight; and the pilot has the runwayenvironment in sight. Otherwise, it is the pilot’ sresponsibility to execute a missed approach at the offsetapproach MAP .
e.Ensure that the trailing offset aircraft is
positioned to facilitate the flight crew’s ability to see
the lead straight in traffic from the nominal
clear-of-clouds point to the offset approach MAP sothat the flight crew can remain separated from that
traffic visually from the offset approach MAP to the
runway threshold.
NOTE−
After accepting a clearance for an offset PRM approach,pilots must remain on the offset approach course until
passing the offset approach MAP prior to alignment with
the runway centerline. Between the offset approach MAPand the runway threshold, the pilot of the offset approachaircraft assumes visual separation responsibility from theaircraft on the straight-in approach, which means
maneuvering the air craft as necessary to avoid the straight
in approach traffic until landing, and providing waketurbulence avoidance, if necessary.
f.In the visual segment between the offset
approach MAP and the runway threshold, if the pilot
of the trailing offset aircraft loses visual contact with
the lead straight-in traffic, the pilot must advise ATC
as soon as practical and follow the published missed
approach procedure. If necessary, issue alternatemissed approach instructions.
g.Wake turbulence requirements between aircraft
on adjacent final approach courses inside the offset
approach MAP are as follows (standard in-trail wake
separation must be applied between aircraft on thesame approach course):
1.When runways are at least 2,500 feet apart,
there are no wake turbulence requirements between
aircraft on adjacent final approach courses.
2.For runways less than 2,500 feet apart,
whenever the ceiling is greater than or equal to500 feet above the MV A, wake vortex spacing
between aircraft on adjacent final approach courses
need not be applied.
3.For runways less than 2,500 feet apart,
whenever the ceiling is less than 500 feet above the
MV A, wake vortex spacing between aircraft on
adjacent final approach courses, as described in Para
5−5−4, Minima, must be applied unless acceptable
mitigating techniques and operational procedures
have been documented and verified by an AFS safety
assessment and authorized by the Director, Opera-
tions-Headquarters, AJT-2. The wake turbulence
mitigation techniques employed will be based oneach airport’s specific runway geometry and
meteorological conditions and implemented through
local facility directives.
4.Issue all applicable wake turbulence
advisories.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−9−12 Radar ArrivalsREFERENCE −
F AAO JO 8260.49, Para 13.0, Wake Turbulence Requirements.FAAO JO 7210.3, Para 10 −4−6, Simultaneous Independent
Approaches.
F AAO JO 7110.65, Para 2 −1−20 , Wake Turbulence Cautionary
Advisories.
F AAO JO 7110.65, Para 5 −5−4 , Minima.
h.Consideration should be given to known factors
that may in any way af fect the safety of the instrument
approach phase of flight when conducting SOIA toparallel runways. Factors include but are not limited
to wind direction/velocity, wind −shear alerts/reports,
severe weather activity, etc. Closely monitor weatheractivity that could impact the final approach course.
Weather conditions in the vicinity of the final
approach course may dictate a change of the approach
in use.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−13 , Radar Service Termination.
F AAO JO 7110.65, Para 5 −9−2 , Final Approach Course Interception.
5−9−10. SIMULTANEOUS INDEPENDENT
APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINAL
MONITORS
a.Simultaneous independent approaches to
widely-spaced parallel runways may only be
conducted where instrument approach charts spe-
cifically authorize simultaneous approaches.
b.Apply the following minimum separation when
conducting simultaneous independent approaches to
runway centerlines that are separated by more than
9,000 feet with a field elevation at or below 5,000 feet
MSL, or 9,200 feet between runway centerlines with
a field elevation above 5,000 feet MSL:
1.Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation betweenaircraft:
(a)during turn-on to parallel final approach,
or
(b)conducting an RNA V (RNP) approach
that contains a Radius-to-Fix (RF) leg and an aircraft
conducting a straight-in ILS/RNA V with vertical
guidance/GLS or another RNA V (RNP) approach
with an RF leg until both aircraft are established on
their respective approach procedures. Ensure dual
RNA V (RNP) approaches that contain RF legs are
limited to aircraft approaching from opposite
downwinds or base legs and all approach pairingsmust be conducted so that the approach courses do not
overlap.
REFERENCE −
F AAO JO 7210.3, Paragraph 10-4-7, Simultaneous
Widely-Spaced Parallel Operations
2.Provide the minimum applicable radar
separation between aircraft on the same final
approach course.
REFERENCE −
F AAO JO 7110.65, para 5-5-4, Minima.
c.The following conditions are required when
applying the minimum separation on widely −spaced
parallel courses allowed in subpara b:
1.Straight-in landings will be made.
2.The approach system, radar, and appropriate
frequencies are operating normally.
3.Inform aircraft that simultaneous approaches
are in use prior to aircraft departing an outer fix. This
information may be provided through the ATIS.
4.Clear an aircraft to descend to the appropriate
glideslope/glidepath intercept altitude soon enough
to provide a period of level flight to dissipate excess
speed. Provide at least 1 mile of straight flight priorto the final approach course intercept.
NOTE−
Not applicable to approaches with RF legs.
5.Separate final and local controllers are
required for each final. Aircraft on the final must be
on the appropriate final controller frequency for that
runway.
6.Transfer of communication and monitor
responsibility to the tower controller’s frequency
must be specified in a facility directive and/or Letterof Agreement.
d.The following procedures must be used by the
final approach controllers:
NOTE−
There is no requirement for establishment of a NTZ.
1.Instruct the aircraft to return to the correct
final approach course when that aircraft is observedto overshoot the turn-on or continue on a track which
deviates from the final approach course in the
direction of the adjacent approach course.
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY ANDRETURN TO THE FINAL APPROACH COURSE,3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−9−13 Radar Arrivalsor
TURN (left/right) AND RETURN TO THE FINALAPPROACH COURSE.
2.Instruct aircraft on adjacent final approach
course to alter course to avoid the deviating aircraftwhen an aircraft is observed, or in the controller’s
judgment, has deviated from the final approach
course in the direction of the adjacent approachcourse.
PHRASEOLOGY −
TRAFFIC ALERT, (call sign), TURN (left/right)IMMEDIATELY HEADING (degrees), CLIMB ANDMAINTAIN (altitude)
3.Do not inform the aircraft when radar
monitoring is terminated.
e.Consideration should be given to known factors
that may in any way af fect the safety of the instrument
approach phase of flight when simultaneous
approaches are being conducted to parallel runways.
Factors include, but are not limited to, wind
direction/velocity, wind-shear alerts/reports, severeweather activity, etc. Closely monitor weather
activity that could impact the final approach course.
Weather conditions in the vicinity of the final
approach course may dictate a change of approach in
use.
REFERENCE −
F AAO JO 7110.65, Para 5-9-2, Final Approach Course Interception.
5−9−11. TRANSITIONAL PROCEDURE
When aircraft are conducting simultaneous
dependent, independent, or any approaches allowing
for reduced separation, and one of the aircraftexecutes a go-around or has its approach clearance
terminated and prior to losing the approved reduced
separation, control instructions must be expeditiously
issued to increase separation between the applicable
aircraft. These control instructions must establish
approved separation (for example, altitude and/orlateral separation via divergence). In addition, wake
turbulence cautionary advisories must be issued in
accordance with FAAO JO 7110.65, Paragraph
2-1-20, Wake Turbulence Cautionary Advisories. 5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−10−1 Radar Approaches − TerminalSection 10. Radar Approaches − Terminal
5−10−1. APPLICATION
a.Provide radar approaches in accordance with
standard or special instrument approach procedures.
b.A radar approach may be given to any aircraft
upon request and may be of fered to aircraft in distress
regardless of weather conditions or to expeditetraffic.
NOTE−
Acceptance of a radar approach by a pilot does not waive
the prescribed weather minima for the airport or for theparticular aircraft operator concerned. The pilot isresponsible for determining if the approach and landing
are authorized under the existing weather minima.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−2. APPROACH INFORMATION
a.Issue the following information to an aircraft
that will conduct a radar approach. Current approach
information contained in the ATIS broadcast may be
omitted if the pilot states the appropriate ATIS
broadcast code. All items listed below, except for
subpara 3 may be omitted after the first approach ifrepeated approaches are made and no change has
occurred. T ransmissions with aircraft in this phase of
the approach should occur approximately everyminute.
REFERENCE −
F AAO JO 7110.65, Para 4 −7−10, Approach Information.
1.Altimeter setting.
2.If available, ceiling and visibility if the
ceiling at the airport of intended landing is reported
below 1,000 feet or below the highest circlingminimum, whichever is greater, or if the visibility is
less than 3 miles. Advise pilots when weather
information is available via the Automated WeatherObserving System (AWOS)/Automated Surface
Observing System (ASOS) and, if requested, issue
the appropriate frequency.
NOTE−
Automated weather observing systems may be set to
provide one minute updates. This one minute data may be
useful to the pilot for possible weather trends. Controllers
provide service based solely on official weather, i.e., hourly
and special observations.3.Issue any known changes classified as special
weather observations as soon as possible. Special
weather observations need not be issued after they are
included in the A TIS broadcast and the pilot states the
appropriate ATIS broadcast code.
4.Pertinent information on known airport
conditions if they are considered necessary to the safe
operation of the aircraft concerned.
5.Lost communication procedures as specified
in para 5−10−4, Lost Communications.
b.Before starting final approach:
NOTE−
1.ASR approach procedures may be prescribed for
specific runways, for an airport/heliport, and for
helicopters only to a “point-in-space,“ i.e., a MAP from
which a helicopter must be able to proceed to the landingarea by visual reference to a prescribed surface route.
2.Occasionally, helicopter P AR appr oaches are available
to runways where conventional P AR approaches have been
established. In those instances where the two P AR
approaches serve the same runway, the helicopterapproach will have a steeper glide slope and a lowerdecision height. By the controllers designating the
approach to be flown, the helicopter pilot understands
which of the two approaches he/she has been vectored forand which set of minima apply.
1.Inform the aircraft of the type of approach,
runway, airport, heliport, or other point, as
appropriate, to which the approach will be made.
Specify the airport name when the approach is to a
secondary airport.
PHRASEOLOGY −
THIS WILL BE A P −A−R/SUR VEILLANCE APPROACH
TO:
RUNWAY (runway number),
or
(airport name) AIRPORT, RUNWAY (runway number),
or
(airport name) AIRPORT/HELIPORT.
THIS WILL BE A COPTER P −A−R APPROACH TO:
RUNWAY (runway number),
JO 7110.65W 12/10/15
5−10−2 Radar Approaches − Terminalor
(airport name) AIRPORT, RUNWAY (runway number),
or
(airport name) AIRPORT/HELIPORT.
2.For surveillance approaches, specify the
location of the MAP in relation to the runway/airport/
heliport.
PHRASEOLOGY −
MISSED APPROACH POINT IS (distance) MILE(S)FROM RUNWAY/AIRPORT/HELIPORT,
or for a point-in-space approach,
A MISSED APPROACH POINT (distance) MILE(S)
(direction from landing area) OF (airport name)AIRPORT/HELIPORT.
EXAMPLE −
Helicopter point-in-space approach:
“Army copter Zulu Two, this will be a surveillance
approach to a missed appr oach point, three point five miles
south of Creedon Heliport.”
REFERENCE −
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
c.Inform an aircraft making an approach to an
airport not served by a tower that no traffic or landing
runway information is available for that airport.
PHRASEOLOGY −
NO TRAFFIC OR LANDING RUNWAY INFORMATION
AVAILABLE FOR THE AIRPORT.
REFERENCE −
F AAO JO 7110.65, Para 2 −7−2, Altimeter Setting Issuance Below
Lowest Usable FL.F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
5−10−3. NO-GYRO APPROACH
When an aircraft will make a no-gyro surveillance or
a PAR approach:
a.Before issuing a vector, inform the aircraft of
the type of approach.
PHRASEOLOGY −
THIS WILL BE A NO-GYRO SURVEILLANCE/P −A−R
APPROACH.
b.Instruct the aircraft when to start and stop turn.PHRASEOLOGY −
TURN LEFT/RIGHT. STOP TURN.
c.After turn on to final approach has been made
and prior to the aircraft reaching the approach gate,
instruct the aircraft to make half-standard rate turns.
PHRASEOLOGY −
MAKE HALF-STANDARD RATE TURNS.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−4. LOST COMMUNICATIONS
When weather reports indicate that an aircraft will
likely encounter IFR weather conditions during the
approach, take the following action as soon as
possible after establishing radar identification andradio communications (may be omitted after the first
approach when successive approaches are made and
the instructions remain the same):
NOTE−
Air traffic contr ol facilities at U.S. Army and U.S. Air Force
installations are not r equired to transmit lost communica-
tions instructions to military aircraft. All military facilities
will issue specific lost communications instructions to civil
aircraft when required.
a.If lost communications instructions will require
the aircraft to fly on an unpublished route, issue anappropriate altitude to the pilot. If the lost
communications instructions are the same for both
pattern and final, the pattern/vector controller mustissue both. Advise the pilot that if radio communica-
tions are lost for a specified time interval (not more
than 1 minute) on vector to final approach, 15 seconds
on a surveillance final approach, or 5 seconds on a
PAR final approach to:
1.Attempt contact on a secondary or a tower
frequency.
2.Proceed in accordance with visual flight rules
if possible.
3.Proceed with an approved nonradar
approach, or execute the specific lost communica-
tions procedure for the radar approach being used.
NOTE−
The approved procedures are those published on the F AAForms 8260 or applicable military document.
JO 7110.65W 12/10/15
5−10−3 Radar Approaches − TerminalPHRASEOLOGY −
IF NO TRANSMISSIONS ARE RECEIVED FOR (timeinterval) IN THE P ATTERN OR FIVE/FIFTEENSECONDS ON FINAL APPROACH, ATTEMPT
CONTACT ON (frequency), AND
if the possibility exists,PROCEED VFR. IF UNABLE:
if approved,
PROCEED WITH (nonradar approach), MAINTAIN
(altitude) UNTIL ESTABLISHED ON/OVER FIX/
NAVAID/APPROACH PROCEDURE,
or
(alternative instructions).
PHRASEOLOGY −
USN. For ACLS operations using Mode I, IA, and II,
IF NO TRANSMISSIONS ARE RECEIVED FOR
FIVE SECONDS AFTER LOSS OF DATA LINK,ATTEMPT CONTACT ON (frequency), AND
if the possibility exists,
PROCEED VFR. IF UNABLE:
if approved,
PROCEED WITH (nonradar approach), MAINTAIN
(altitude) UNTIL ESTABLISHED ON/OVER FIX/NAVAID/APPROACH PROCEDURE,
or
(alternative instructions).
b.If the final approach lost communications
instructions are changed, differ from those for the
pattern, or are not issued by the pattern controller,they must be issued by the final controller.
c.If the pilot states that he/she cannot accept a lost
communications procedure due to weather condi-tions or other reasons, request the pilot’s intention.
NOTE−
The pilot is responsible for determining the adequacy of
lost communications procedures with respect to aircraft
performance, equipment capability, or reported weather.REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −10−2, Approach Information.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−5. RADAR CONTACT LOST
If radar contact is lost during an approach and the
aircraft has not started final approach, clear the
aircraft to an appropriate NA V AID/fix for an
instrument approach.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −10−14, Final Approach Abnormalities.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−6. LANDING CHECK
USA/USN. Advise the pilot to perform landing
check while the aircraft is on downwind leg and intime to complete it before turning base leg. If an
incomplete pattern is used, issue this before handoff
to the final controller for a PAR approach, or beforestarting descent on final approach for surveillance
approach.
PHRASEOLOGY −
PERFORM LANDING CHECK.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−7. POSITION INFORMATION
Inform the aircraft of its position at least once before
starting final approach.
PHRASEOLOGY −
(Number) MILES (direction) OF (airport name)
AIRPORT,
or
(number) MILES (direction) OF (airport name) AIRPORT
ON DOWNWIND/BASE LEG.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−8. FINAL CONTROLLER
CHANGEOVER
When instructing the aircraft to change frequency for
final approach guidance, include the name of the
facility.
PHRASEOLOGY −
CONTACT (name of facility) FINAL CONTROLLER ON
(frequency).
JO 7110.65W 12/10/15
5−10−4 Radar Approaches − TerminalREFERENCE −
F AAO JO 7110.65, Para 2 −1−17, Radio Communications Transfer.
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −9−4, Arrival Instructions.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−9. COMMUNICATIONS CHECK
On initial contact with the final controller, ask the
aircraft for a communication check.
PHRASEOLOGY −
(Aircraft call sign), (name of facility) FINAL
CONTROLLER. HOW DO YOU HEAR ME?
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−10. TRANSMISSION
ACKNOWLEDGMENT
After contact has been established with the final
controller and while on the final approach course,
instruct the aircraft not to acknowledge further
transmissions.
PHRASEOLOGY −
DO NOT ACKNOWLEDGE FURTHER TRANS-MISSIONS.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−11. MISSED APPROACH
Before an aircraft starts final descent for a full stop
landing and weather reports indicate that any portion
of the final approach will be conducted in IFR
conditions, issue a specific missed approachprocedure approved for the radar approach being
conducted.
PHRASEOLOGY −
YOUR MISSED APPROACH PROCEDURE IS (missed
approach procedure).
NOTE−
1.The specific missed approach pr ocedure is published on
FAA Form 8260 −4 or applicable military document.
2.USAF . At locations where missed approach instruc-
tions are published in base flying regulations, controllers
need not issue missed approach instructions to locally
assigned/attached aircraft.REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−12. LOW APPROACH AND TOUCH-
AND-GO
Before an aircraft which plans to execute a low
approach or touch-and-go begins final descent, issue
appropriate departure instructions to be followed
upon completion of the approach. Climb-outinstructions must include a specific heading and
altitude except when the aircraft will maintain VFR
and contact the tower.
PHRASEOLOGY −
AFTER COMPLETING LOW APPROACH/T OUCH AND
GO:
CLIMB AND MAINTAIN (altitude).
TURN (right or left) HEADING (degrees)/FLY RUNWAY
HEADING,
or
MAINTAIN VFR, CONTACT TOWER,
or
(other instructions as appropriate).
NOTE−
This may be omitted after th e first approach if instructions
remain the same.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−13. TOWER CLEARANCE
a.When an aircraft is on final approach to an
airport served by a tower, obtain a clearance to land,
touch-and-go, or make low approach. Issue theclearance and the surface wind to the aircraft.
b.If the clearance is not obtained or is canceled,
inform the aircraft and issue alternative instructions.
PHRASEOLOGY −
TOWER CLEARANCE CANCELED/NOT RECEIVED(alternative instructions).
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
JO 7110.65W 12/10/15
5−10−5 Radar Approaches − Terminal5−10−14. FINAL APPROACH
ABNORMALITIES
Instruct the aircraft if runway environment not in
sight, execute a missed approach if previously given;
or climb to or maintain a specified altitude and fly aspecified course whenever the completion of a safe
approach is questionable because one or more of the
following conditions exists. The conditions insubparas a, b, and c do not apply after the aircraft
passes decision height on a PAR approach.
EXAMPLE −
Typical reasons for issuing missed approach instructions:
“Radar contact lost.”
“Too high/low for safe approach.”“Too far right/left for safe approach.”
REFERENCE −
F AAO JO 7110.65, Para 5 −12−7, Position Advisories.
a.Safety limits are exceeded or radical target
deviations are observed.
b.Position or identification of the aircraft is in
doubt.
c.Radar contact is lost or a malfunctioning radar
is suspected.
PHRASEOLOGY −
(Reason) IF RUNWAY/APPROACH LIGHTS/RUNWAY
LIGHTS NOT IN SIGHT, EXECUTE MISSED
APPROACH/(alternative instructions).
NOTE−
If the pilot requests, approval may be granted to proceedwith the approach via ILS or another navigationalaid/approach aid.
REFERENCE −
F AAO JO 7110.65, Para 5 −10−5, Radar Contact Lost.
d.Airport conditions or traffic preclude approach
completion.
PHRASEOLOGY −
EXECUTE MISSED APPROACH/(alternative instruc-tions), (reason).REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
5−10−15. MILITARY SINGLE FREQUENCY
APPROACHES
a.Utilize single frequency approach procedures
as contained in a letter of agreement.
b.Do not require a frequency change from aircraft
on a single frequency approach after the approach has
begun unless:
1.Landing or low approach has been
completed.
2.The aircraft is in visual flight rules (VFR)
conditions during daylight hours.
3.The pilot requests the frequency change.
4.An emergency situation exists.
5.The aircraft is cleared for a visual approach.
6.The pilot cancels instrument flight rules
(IFR).
c.Accomplish the following steps to complete
communications transfer on single frequencyapproaches after completion of a handoff:
1.Transferring controller: Position transmitter
selectors to preclude further transmissions on the
special use frequencies.
2.Receiving controller: Position transmitter
and receiver selectors to enable communications on
the special use frequencies.
3.Do not require or expect the flight to check on
frequency unless an actual frequency change istransmitted to the pilot.
JO 7110.65W 12/10/15
5−11−1 Surveillance Approaches − TerminalSection 11. Surveillance Approaches − Terminal
5−11−1. ALTITUDE INFORMATION
Provide recommended altitudes on final approach if
the pilot requests. If recommended altitudes arerequested, inform the pilot that recommended
altitudes which are at or above the published MDA
will be given for each mile on final.
REFERENCE −
F AAO JO 7210.3, Para 10 −5−7, Recommended Altitudes for
Surveillance Approaches.F AAO JO 7110.65, Para 5 −11−5, Final Approach Guidance.
PHRASEOLOGY −
RECOMMENDED ALTITUDES WILL BE PROVIDEDFOR EACH MILE ON FINAL TO MINIMUM DESCENT
ALTITUDE/CIRCLING MINIMUM DESCENT
ALTITUDE.
5−11−2. VISUAL REFERENCE REPORT
Aircraft may be requested to report the runway,
approach/runway lights, or airport in sight. Heli-
copters making a “point-in-space” approach may be
requested to report when able to proceed to the
landing area by visual reference to a prescribedsurface route.
PHRASEOLOGY −
REPORT (runway, approach/runway lights or airport) INSIGHT.
REPORT WHEN ABLE TO PROCEED VISUALLY TO
AIRPORT/HELIPORT.
5−11−3. DESCENT NOTIFICATION
a.Issue advance notice of where descent will
begin and issue the straight-in MDA prior to issuing
final descent for the approaches.
NOTE−
The point at which descent to the minimum descent altitude
is authorized is the final approach fix unless an altitudelimiting stepdown-fix is prescribed.
b.When it is determined that the surveillance
approach will terminate in a circle to land maneuver,
request the aircraft approach category from the pilot.
After receiving the aircraft approach category,
provide him/her with the applicable circling MDAprior to issuing final descent for the approach.NOTE−
Pilots are normally expected to furnish the aircraftapproach category to the controller when it is determinedthat the surveillance approach will terminate in a circle to
land maneuver. If this information is not voluntarily given,
solicit the aircraft approach category from the pilot, andthen issue him/her the applicable circling MDA.
PHRASEOLOGY −
PREPARE TO DESCEND IN (number) MILE(S).
for straight-in approaches,
MINIMUM DESCENT ALTITUDE (altitude).
for circling approaches,
REQUEST YOUR AIRCRAFT APPROACH CATEGORY.
(Upon receipt of aircraft approach category),PUBLISHED CIRCLING MINIMUM DESCENT
ALTITUDE (altitude).
5−11−4. DESCENT INSTRUCTIONS
When an aircraft reaches the descent point, issue one
of the following as appropriate:
REFERENCE −
F AAO JO 7110.65, Para 5 −12−10, Elevation Failure.
a.Unless a descent restriction exists, advise the
aircraft to descend to the MDA.
PHRASEOLOGY −
(Number) MILES FROM RUNWAY/AIRPORT/HELIPORT. DESCEND TO YOUR MINIMUM DESCENT
ALTITUDE.
b.When a descent restriction exists, specify the
prescribed restriction altitude. When the aircraft has
passed the altitude limiting point, advise to continue
descent to MDA.
PHRASEOLOGY −
(Number) MILES FROM RUNWAY/AIRPORT/HELIPORT. DESCEND AND MAINTAIN (restriction
altitude).
DESCEND TO YOUR MINIMUM DESCENT AL TITUDE.
5−11−5. FINAL APPROACH GUIDANCE
a.Issue course guidance, inform the aircraft when
it is on course, and frequently inform the aircraft of
any deviation from course. Transmissions with
aircraft on surveillance final approach should occurapproximately every 15 seconds.
JO 7110.65W 12/10/15
5−11−2 Surveillance Approaches − TerminalPHRASEOLOGY −
HEADING (heading),
ON COURSE,
or
SLIGHTLY/WELL LEFT/RIGHT OF COURSE.
NOTE−
Controllers should not key the radio transmittercontinuously during radar approaches to preclude alengthy communications block. The decision on how often
transmitters are unkeyed is the controller’ s prerogative.
b.Issue trend information, as required, to indicate
target position with respect to the extended runway
centerline and to describe the target movement as
appropriate corrections are issued. T rend information
may be modified by the terms “RAPIDLY” and“SLOWLY” as appropriate.
EXAMPLE −
“Going left/right of course.”
“Left/right of course and holding/correcting.”
c.Inform the aircraft of its distance from the
runway, airport/heliport, or MAP, as appropriate,each mile on final.
PHRASEOLOGY −
(Number) MILE(S) FROM RUNWAY/AIRPORT/
HELIPORT OR MISSED APPROACH POINT.
d.Recommended altitudes must be furnished, if
requested, in accordance with para 5 −11−1, Altitude
Information.
PHRASEOLOGY −
If requested,
ALTITUDE SHOULD BE (altitude).
5−11−6. APPROACH GUIDANCE
TERMINATION
a.Discontinue surveillance approach guidance
when:
1.Requested by the pilot.
2.In your opinion, continuation of a safe
approach to the MAP is questionable.
3.The aircraft is over the MAP.
b.Surveillance approach guidance may be
discontinued when the pilot reports the runway or
approach/runway lights in sight or if a “point-in-space” approach, he/she reports able to proceed to
the landing area by visual reference to a prescribed
surface route.
c.When approach guidance is discontinued in
accordance with subpara a and the aircraft hasreported the runway or approach/runway lights in
sight, advise the aircraft of its position and to proceed
visually.
PHRASEOLOGY −
(Distance) MILE(S) FROM RUNWAY/AIRPORT/
HELIPORT,
or
OVER MISSED APPROACH POINT.
PROCEED VISUALLY (additional instructions/clearance
as required.)
d.When approach guidance is discontinued in
accordance with subpara a above and the aircraft has
not reported the runway or approach/runway lights insight, advise the aircraft of its position and to execute
a missed approach unless the runway or approach/
runway lights are in sight or, if a “point-in-space”approach, unless able to proceed visually.
PHRASEOLOGY −
(Distance) MILE(S) FROM RUNWAY,
or
OVER MISSED APPROACH POINT.
IF RUNWAY,
or
APPROACH/RUNWAY LIGHTS NOT IN SIGHT,
EXECUTE MISSED APPROACH/(missed approach
instructions). (Additional instructions/clearance, asrequired.)
(Distance and direction) FROM AIRPORT/HELIPORT/
MISSED APPROACH POINT.
IF UNABLE TO PROCEED VISUALLY, EXECUTE
MISSED APPROACH. (Additional instructions/clear-ance, if required.)
NOTE−
Terminal instrument approach procedures and flight
inspection criteria r equire establishment of a MAP for each
procedure including the point to which satisfactory radarguidance can be provided.
JO 7110.65W 12/10/15
5−12−1 PAR Approaches − TerminalSection 12. PAR Approaches − Terminal
5−12−1. GLIDEPATH NOTIFICATION
Inform the aircraft when it is approaching glidepath
(approximately 10 to 30 seconds before final
descent).
PHRASEOLOGY −
APPROACHING GLIDEP ATH.
5−12−2. DECISION HEIGHT (DH)
NOTIFICATION
Provide the DH to any pilot who requests it.
PHRASEOLOGY −
DECISION HEIGHT (number of feet).
5−12−3. DESCENT INSTRUCTION
When an aircraft reaches the point where final
descent is to start, instruct it to begin descent.
PHRASEOLOGY −
BEGIN DESCENT.
5−12−4. GLIDEPATH AND COURSE
INFORMATION
a.Issue course guidance and inform the aircraft
when it is on glidepath and on course, and frequently
inform the aircraft of any deviation from glidepath or
course. T ransmissions with aircraft on precision final
approach should occur approximately every
5 seconds.
PHRASEOLOGY −
HEADING (heading).
ON GLIDEP ATH.
ON COURSE,
or
SLIGHTLY/WELL ABOVE/BELOW GLIDEP ATH.
SLIGHTLY/WELL LEFT/RIGHT OF COURSE.
NOTE−
Controllers should not key the radio transmittercontinuously during radar approaches to preclude alengthy communications block. The decision on how often
transmitters are unkeyed is the controller’ s prerogative.b.Issue trend information as required, to indicate
target position with respect to the azimuth and
elevation cursors and to describe target movement as
appropriate corrections are issued. T rend information
may be modified by the terms “RAPIDLY” or“SLOWLY ,” as appropriate.
EXAMPLE −
“Going above/below glidepath.”“Going right/left of course.”“Above/below glidepath and coming down/up.”
“Above/below glidepath and holding.”
“Left/right of course and holding/correcting.”
REFERENCE −
F AAO JO 7110.65, Para 5 −12−7, Position Advisories.
F AAO JO 7110.65, Para 5 −13−3, Monitor Information.
5−12−5. DISTANCE FROM TOUCHDOWN
Inform the aircraft of its distance from touchdown at
least once each mile on final approach.
PHRASEOLOGY −
(Number of miles) MILES FROM TOUCHDOWN.
5−12−6. DECISION HEIGHT
Inform the aircraft when it reaches the published
decision height.
PHRASEOLOGY −
AT DECISION HEIGHT.
5−12−7. POSITION ADVISORIES
a.Continue to provide glidepath and course
information prescribed in para 5 −12−4, Glidepath
and Course Information, subparas a and b, until theaircraft passes over threshold.
NOTE−
Glidepath and course information pr ovided below decision
height is advisory only. 14 CFR Section 91.175 outlines
pilot responsibilities for descent below decision height.
b.Inform the aircraft when it is passing over the
approach lights.
PHRASEOLOGY −
OVER APPROACH LIGHTS.
c.Inform the aircraft when it is passing over the
landing threshold and inform it of its position withrespect to the final approach course.
JO 7110.65W 12/10/15
5−12−2 PAR Approaches − TerminalPHRASEOLOGY −
OVER LANDING THRESHOLD, (position with respect to
course).
REFERENCE −
F AAO JO 7110.65, Para 5 −10−14, Final Approach Abnormalities.
5−12−8. APPROACH GUIDANCE
TERMINATION
a.Discontinue precision approach guidance
when:
1.Requested by the pilot.
2.In your opinion, continuation of a safe
approach to the landing threshold is questionable.
3.The aircraft passes over landing threshold.
4.The pilot reports the runway/approach lights
in sight and requests to or advises that he/she will
proceed visually.
NOTE−
A pilot’ s report of “runway in sight” or “visual” is not a
request to proceed visually.
b.When precision approach guidance is discon-
tinued in accordance with subpara a, advise theaircraft of its position and to proceed visually.
PHRASEOLOGY −
(Distance) MILE(S) FROM TOUCHDOWN, PROCEEDVISUALLY (additional instructions/clearance asrequired).
c.After a pilot has reported the runway/approach
lights in sight and requested to or advised that he/she
will proceed visually, and has been instructed toproceed visually, all PAR approach procedures must
be discontinued.
d.Continue to monitor final approach and
frequency. Pilots must remain on final controller’s
frequency until touchdown or otherwise instructed.
REFERENCE −
F AAO JO 7110.65, Para 5 −10−14, Final Approach Abnormalities.
5−12−9. COMMUNICATION TRANSFER
Issue communications transfer instructions.
PHRASEOLOGY −
CONTACT (terminal control function) (frequency, ifrequired) AFTER LANDING.NOTE−
Communications transfer instructions should be delayedslightly until the aircraft is on the landing roll-out topreclude diversion of the pilot’ s attention during transition
and touchdown.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−17, Radio Communications Transfer.
5−12−10. ELEVATION FAILURE
a.If the elevation portion of PAR equipment fails
during a precision approach:
1.Discontinue PAR instructions and tell the
aircraft to take over visually or if unable, to execute
a missed approach. If the aircraft executes a missed
approach, apply subpara 2 below.
PHRASEOLOGY −
NO GLIDEP ATH INFORMATION AVAILABLE. IFRUNWAY, APPROACH/RUNWAY LIGHTS, NOT INSIGHT, EXECUTE MISSED APPROACH/(alternativeinstructions).
2.If a surveillance approach, ASR or PAR
without glide slope, is established for the samerunway, inform the aircraft that a surveillance
approach can be given. Use ASR or the azimuth
portion of the PAR to conduct the approach and apply
Chapter 5, Radar, Section 11, Surve illance
Approaches − Terminal. When the PAR azimuth is
used, inform the pilot that mileage information willbe from touchdown, and at those runways where
specific minima have been established for PAR
without glideslope, inform the pilot that the PARazimuth will be used for the approach.
EXAMPLE −
1.Approach information when P AR azimuth used:
“This will be a surveillance approach to runway three six.
Mileages will be from touchdown.”
or
“This will be a surveillance approach to runway three sixusing P−A−R azimuth. Mileages will be from touchdown.”
2.Descent Instructions:
“Five miles from touchdown, descend to your minimum
descent altitude/minimum altitude.”
REFERENCE −
F AAO JO 7110.65, Para 5 −10−2, Approach Information.
F AAO JO 7110.65, Para 5 −11−4, Descent Instructions.
b.If the elevation portion of the PAR eq uipment is
inoperative before starting a precision approach,
apply subpara a2.
JO 7110.65W 12/10/15
5−12−3 PAR Approaches − Terminal5−12−11. SURVEILLANCE UNUSABLE
PAR approaches may be conducted when the ASR is
unusable provided a nonradar instrument approach
will position the aircraft over a navigational aid orDME fix within the precision radar coverage, or an
adjacent radar facility can provide a direct radar
handoff to the PAR controller.NOTE−
The display of the NAVAID or DME fix in accordance with
para 5−3−2, Primary Radar Identification Methods, is not
required provided the NAVAID or DME fix can be
correlated on a P AR scope.
JO 7110.65W 12/10/15
5−13−1 Use of PAR for Approach Monitoring − TerminalSection 13. Use of PAR for Approach
Monitoring − Terminal
5−13−1. MONITOR ON PAR EQUIPMENT
USAF not applicable. Aircraft conducting precision
or nonprecision approaches must be monitored byPAR equipment if the PAR final approach course
coincides with the NA V AID final approach course
from the final approach fix to the runway and one ofthe following conditions exists:
NOTE−
1.The provisions of this section do not apply to monitoring
simultaneous approaches.
2.This procedure is used in P AR facilities operated by the
F AA and other military services at joint-use civil/militarylocations and military installations during the operational
hours of the P AR.
a.The reported weather is below basic VFR
minima.
b.USA Not applicable. At night.
c.Upon request of the pilot.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−7, Simultaneous Independent
Appr oaches− Dual & T riple.
5−13−2. MONITOR AVAILABILITY
a.Inform the aircraft of the frequency on which
monitoring information will be transmitted if it will
not be the same as the communication frequency usedfor the approach.
PHRASEOLOGY −
RADAR MONITORING ON LOCALIZER VOICE(frequency),
and if applicable,
CONTACT (terminal control function) (frequency, if
required) AFTER LANDING.
b.If the approach is not monitored, inform the
aircraft that radar monitoring is not available.
PHRASEOLOGY −
RADAR MONITORING NOT AVAILABLE.
c.If conditions prevent continued monitor after
the aircraft is on final approach, advise the pilot. Statethe reason and issue alternate procedures as
appropriate.PHRASEOLOGY −
(Reason), RADAR MONITORING NOT AVAILABLE,(alternative instructions).
NOTE−
Approach monitoring is a vita l service, but during the
approach, the contr oller acts primarily as a safety observer
and does not actually guide the aircraft. Loss of the radarmonitoring capability (and thus availability) is no reasonto terminate an otherwise good instrument approach.Advise the pilot that radar contact has been lost (or other
reason as appropriate), that radar monitoring is not
available, and of actions for the pilot to take in eitherproceeding with or br eaking off the appr oach; i.e., contact
tower, remain on P AR frequency, etc.
5−13−3. MONITOR INFORMATION
When approaches are monitored, take the following
action:
a.Advise the pilot executing a nonprecision
approach that glidepath advisories are not provided.
Do this prior to the pilot beginning the final descent.
PHRASEOLOGY −
GLIDEP ATH ADVISORIES WILL NOT BE PROVIDED.
b.Inform the aircraft when passing the final
approach fix (nonprecision approaches) or whenpassing the outer marker or the fix used in lieu of the
outer marker (precision approaches).
PHRASEOLOGY −
P ASSING (FIX).
c.Advise the pilot of glidepath trend information
(precision approaches) and course trend information
to indicate target position and movement with respectto the elevation or azimuth cursor when the aircraft
target corresponds to a position of well above/below
the glidepath or well left/right of course andwhenever the aircraft exceeds the radar safety limits.
Repeat if no correction is observed.
EXAMPLE −
Course trend information:
“(Ident), well right/left of P −A−R course, drifting further
right/left.”
Glidepath trend information:
“(Ident), well above/below P −A−R glidepath.”
REFERENCE −
F AAO JO 7110.65, Para 5 −12−4, Glidepath and Course Information.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
5−13−2 Use of PAR for Approach Monitoring − Terminald.If, after repeated advisories, the aircraft is
observed proceeding outside the safety limits or a
radical target deviation is observed, advise the
aircraft if unable to proceed visually, to execute a
missed approach. Issue a specific altitude andheading if a procedure other than the published
missed approach is to be executed.PHRASEOLOGY −
(Position with respect to course or glidepath). IF NOTVISUAL, ADVISE YOU EXECUTE MISSED APPROACH
(alternative instructions).
e.Provide monitor information until the aircraft is
over the landing threshold or commences a circling
approach.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
5−14−1 Automation − En RouteSection 14. Automation − En Route
5−14−1. CONFLICT ALERT (CA) AND
MODE C INTRUDER (MCI) ALERT
a.When a CA or MCI alert is displayed, evaluate
the reason for the alert without delay and take
appropriate action.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−6, Safety Alert.
b.If another controller is involved in the alert,
initiate coordination to ensure an effective course of
action. Coordination is not required when immediate
action is dictated.
c.Suppressing/Inhibiting CA/MCI alert.
1.The controller may suppress the display of a
CA/MCI alert from a control position with the
application of one of the following suppress/inhibitcomputer functions:
(a)The Conflict Suppress (CO) function may
be used to suppress the CA/MCI display between
specific aircraft for a specific alert.
NOTE−
See NAS −MD−678 for the EARTS conflict suppress
message.
(b)The Group Suppression (SG) function
must be applied exclusively to inhibit the displaying
of alerts among military aircraft engaged in special
military operations where standard en route separa-tion criteria does not apply.
NOTE−
Special military operations where the SG function wouldtypically apply involve those activities where militaryaircraft routinely operate in proximities to each other that
are less than standard en route separation criteria; i.e., air
refueling operations, ADC practice intercept operations,
etc.
2.The computer entry of a message suppressing
a CA/MCI alert constitutes acknowledgment for the
alert and signifies that appropriate action has or will
be taken.3.The CA/MCI alert may not be suppressed or
inhibited at or for another control position without
being coordinated.
5−14−2. EN ROUTE MINIMUM SAFE
ALTITUDE WARNING (E-MSAW)
a.When an E-MSAW alert is displayed, immedi-
ately analyze the situation and take the appropriate
action to resolve the alert.
NOTE−
Caution should be exercised when issuing a clearance to an
aircraft in reaction to an E-MSAW alert to ensure that
adjacent MIA areas are not a factor.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−6, Safety Alert.
b.The controller may suppress the display of an
E-MSAW alert from his/her control position with theapplication of one of the following suppress/inhibit
computer functions:
1.The specific alert suppression message may
be used to inhibit the E-MSAW alerting display on asingle flight for a specific alert.
2.The indefinite alert suppression message
must be used exclusively to inhibit the display of
E-MSAW alerts on aircraft known to be flying at analtitude that will activate the alert feature of one or
more MIA areas within an ARTCC.
NOTE−
1.The indefinite alert suppression message will remain in
effect for the duration of the r eferenced flight’ s active status
within the ARTCC unless modified by controller action.
2.The indefinite alert suppression message would
typically apply to military flights with clearance to flylow-level type routes that r outinely requir e altitudes below
established minimum IFR altitudes.
c.The computer entry of a message suppressing or
inhibiting E-MSAW alerts constitutes acknowledg-
ment for the alert and indicates that appropriate action
has or will be taken to resolve the situation.
JO 7110.65W 12/10/15
5−14−2 Automation − En Route5−14−3. COMPUTER ENTRY OF FLIGHT
PLAN INFORMATION
a.Altitude
1.The altitude field(s) of the data block must
always reflect the current status of the aircraft unless
otherwise specified in an appropriate facility
directive.
NOTE−
As it applies to altitude, the current status of the aircraft,
for the transferring controller, indicates the clearance
given by air traffic control, dir ectly to and read back by an
aircraft. This ensures the aircraft has received the
clearance and is expected to comply with the instructions.
The current status of the aircraft, for the receiving
controller, indicates the specific verbally coordinated
altitude, if that differs from the altitude coordinated by
automated means.
2.Assigned and Interim altitude information
must not be modified outside of the controller’s area
of jurisdiction unless verbally coordinated or
specified in a Letter of Agreement or Facility
Directive.
3.Whenever an aircraft is cleared to maintain an
altitude different from that in the flight plan database,
enter into the computer one of the following:
(a)The new assigned altitude if the aircraft
will (climb or descend to and) maintain the new
altitude, or
(b)An interim altitude if the aircraft will
(climb or descend to and) maintain the new altitude
for a short period of time and subsequently be
recleared to the altitude in the flight plan database or
a new altitude or a new interim altitude, or
(c)A Local Interim Altitude (LIA), entered
by the transferring controller when the assigned
altitude differs from the coordinated altitude unless
verbally coordinated or specified in a Letter of
Agreement or Facility Directive.
NOTE−
A facility directive may be published, in accordance with
JO 7210.3, Paragraph 8-2-7, Waiver to Interim Altitude
Requirements, deleting the interim altitude computer entry
requirements of subpara 3(b).
b.Flight Plan Route Data
This information must not be modified outside of the
controller’s area of jurisdiction unless verballycoordinated or specified in a Letter of Agreement or
Facility Directive.
5−14−4. ENTRY OF REPORTED ALTITUDE
Whenever Mode C altitude information is either not
available or is unreliable, enter reported altitudes into
the computer as follows:
NOTE−
Altitude updates are r equired to assure maximum accuracy
in applying slant range correction formulas.
a.When an aircraft reaches the assigned altitude.
b.When an aircraft at an assigned altitude is issued
a clearance to climb or descend.
c.A minimum of each 10,000 feet during climb to
or descent from FL 180 and above.
5−14−5. SELECTED ALTITUDE LIMITS
The display of Mode C tar gets and limited data blocks
is necessary for application of Merging Target
Procedures. Sectors must ensure the display of
Mode C targets and data blocks by entering
appropriate altitude limits and display filters to
include, as a minimum, the altitude stratum of thesector plus:
a.1,200 feet above the highest and below the
lowest altitude or flight level of the sector where
1,000 feet vertical separation is applicable; and
b.2,200 feet above the highest and below the
lowest flight level of the sector where 2,000 feetvertical separation is applicable.
NOTE−
1.The data block, for purposes of this paragraph, must
contain the Mode C altitude and call sign or beacon code
at a minimum.
2.Exception to these requir ements may be authorized for
specific altitudes in certain ARTCC sectors if defined inappropriate facility directives and approved by the
En Route and Oceanic Operations Area Director.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−2, Alignment Accuracy Check.
5−14−6. SECTOR ELIGIBILITY
The use of the OK function is allowed to override
sector eligibility only when one of the followingconditions is met:
a.Prior coordination is effected.
JO 7110.65W 12/10/15
5−14−3 Automation − En Routeb.The flight is within the control jurisdiction of
the sector.
5−14−7. COAST TRACKS
Do not use coast tracks in the application of either
radar or nonradar separation criteria.
5−14−8. CONTROLLER INITIATED COAST
TRACKS
a.Initiate coast tracks only in Flight Plan Aided
Tracking (FLAT) mode, except “free” coast tracking
may be used as a reminder that aircraft without
corresponding computer-stored flight plan informa-tion are under your control.
NOTE−
1.To ensure tracks are started in FLAT mode, perform a
start track function at the aircraft’ s most current reportedposition, then immediately “force” the track into coast
tracking by performing another start function with “CT”
option in field 64. Making amendments to the stored route
with trackball entry when the aircraft is rerouted, andrepositioning the data block to coincide with the aircraft’ s
position reports are methods of maintaining a coast track
in FLAT mode.
EBUS does not have the capability to initiate coast
tracks .
b.Prior to initiating a coast track, ensure that a
departure message or progress report corresponding
with the aircraft’s current position is entered into the
computer.
c.As soon as practicable after the aircraft is in
radar surveillance, initiate action to cause radartracking to begin on the aircraft.
5−14−9. ERAM COMPUTER ENTRY OF
HOLD INFORMATION
a.When an aircraft is issued holding instructions,
the delay is ATC initiated, and the EFC is other than
“no delay expected:”1.Enter a hold message.
2.Maintain a paired track.
3.Enter an EFC time via a hold message, the
Hold Data Menu, or the Hold View.
4.Enter non-published holding instructions via
a hold message or the Hold Data Menu .
NOTE−
The ERAM hold message allows automatic calculation and
reporting of aggregate delays.
b.Unless otherwise specified in a facility
directive, verbally coordinate non-published holding
instructions when handing off an aircraft in hold
status to another ERAM sector.
c.An EFC time entered into the Hold Data Menu,
Hold View, or the hold message constitutes
coordination of the EFC between ERAM sectors.
REFERENCE −
F AAO JO 7210.3, Para 8-2-9, ERAM Hold Information Facility
Directive Requirements
5−14−10. ERAM VISUAL INDICATOR OF
SPECIAL ACTIVITY AIRSPACE (SAA)
STATUS
Sector controllers shall ensure the situation display
accurately reflects the status of all SAAs that impact
their area of control responsibility. When “SAA
DOWN” is displayed in the Outage View, manually
create visual indicators on the situation display to
reflect changes to airspace status.
NOTE−
The “SAA DOWN” message in the Outage V iew means that
SAA status is no longer being updated. The status of each
SAA at the time of the failure, whether “on” or “off”, will
continue to be displayed. Status changes will not be
automatically updated on the display until the outage is
resolved.
JO 7110.65W 12/10/15
5−15−1 Common Automated Radar Terminal Systems (CARTS) & Standard Terminal Automation
Replacement System (ST ARS)−TerminalSection 15. Common Automated Radar
Terminal Systems (CARTS) & Standard
Terminal Automation Replacement System
(STARS) −Terminal
5−15−1. APPLICATION
CARTS/STARS may be used for identifying aircraft
assigned a discrete beacon code, maintaining identity
of targets, and performing handoffs of these targets
between controllers. All procedures for the terminal
domain related to air traffic control services using
CARTS or STARS apply to the FUSION target.
5−15−2. RESPONSIBILITY
This equipment does not relieve the controller of the
responsibility to ensure proper identification, main-
tenance of identity, handoff of the correct target
associated with the alphanumeric data, and separa-tion of aircraft.
5−15−3. FUNCTIONAL USE
In addition to other uses specified herein, terminal
automation may be used for the following functions:
a.Tracking.
b.Tagging.
c.Handoff.
d.Altitude information.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−23, Altitude Filters.
e.Coordination.
f.Ground speed.
g.Identification.
5−15−4. SYSTEM REQUIREMENTS
Use terminal automation systems as follows:
NOTE−
Locally developed pr ocedures, operating instructions, and
training material are required because of differences inequipment capability. Such locally developed procedures
must be supplemental to those contained in this section and
must be designed to make maximum use of the ARTSequipment.a.Inform all appropriate positions before termin-
ating or reinstating use of the terminal automation
system at a control position. When terminating the
use of terminal automation systems, all pertinent
flight data of that position must be transferred orterminated.
b.Inform other interfaced facilities of scheduled
and unscheduled shutdowns.
c.Initiate a track/tag on all aircraft to the
maximum extent possible. As a minimum, aircraftidentification should be entered, and automated
handoff functions should be used.
d.Assigned altitude, if displayed, must be kept
current at all times. Climb and descent arrows, where
available, must be used to indicate other than level
flight.
e.When operating in FUSION mode, the assigned
or pilot reported altitude must be displayed and kept
current when the aircraft is in level flight.
f.The automatic altitude readout of an aircraft
under another controller’s jurisdiction may be usedfor vertical separation purposes without verbal
coordination provided:
1.Operation is conducted using single-site
radar coverage or when operating in FUSION mode.
2.Prearranged coordination procedures are
contained in a facility directive in accordance with
para 5−4−10, Prearranged Coordination, and
FAAO 7210.3, para 3 −7−7, Prearranged Coordi-
nation.
3.Do not use Mode C to effect vertical
separation within a Mosaic radar configuration.
5−15−5. INFORMATION DISPLAYED
a.Two-letter ICAO designators or three-letter
designators, as appropriate, must be used unlessprogram limitations dictate the use of a single letter
alpha prefix.
b.Use of the inhibit/select functions to remove
displayed information no longer required must be in
JO 7110.65W 12/10/15
5−15−2 Common Automated Radar Terminal Systems (CARTS) & Standard Terminal Automation
Replacement System (ST ARS)−Terminalaccordance with local directives, which should
ensure maximum required use of the equipment.
c.Information displayed must be in accordance
with national orders and specified in local directives.
5−15−6. CA/MCI
a.When a CA or MCI alert is displayed, evaluate
the reason for the alert without delay and take
appropriate action.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−6, Safety Alert.
b.If another controller is involved in the alert,
initiate coordination to ensure an effective course of
action. Coordination is not required when immediate
action is dictated.
c.Suppressing/Inhibiting CA/MCI alert.
1.The suppress function may be used to
suppress the display of a specific CA/MCI alert.
2.The inhibit function must only be used to
inhibit the display of CA for aircraft routinely
engaged in operations where approved separation
criteria do not apply.
NOTE−
Examples of operations where approved separationcriteria do not apply are ADC practice inter cept operations
and air shows.
3.Computer entry of a message suppressing a
CA/MCI alert constitutes acknowledgment for thealert and signifies that appropriate action has or will
be taken.
4.CA/MCI alert may not be suppressed or
inhibited at or for another control position without
being coordinated.
5−15−7. INHIBITING MINIMUM SAFE
ALTITUDE WARNING (MSAW)
a.Inhibit MSAW processing of VFR aircraft and
aircraft that cancel instrument flight rules (IFR) flight
plans unless the pilot specifically requests otherwise.
REFERENCE −
F AAO JO 7110.65, Para 10 −2−7, VFR Aircraft in Weather Difficulty.
F AAO JO 7110.65, Para 10 −2−8, Radar Assistance to VFR Aircraft in
Weather Difficulty.
b.A low altitude alert may be suppressed from the
control position. Computer entry of the suppress
message constitutes an acknowledgment for the alert
and indicates that appropriate action has or will be
taken.
5−15−8. TRACK SUSPEND FUNCTION
Use the track suspend function only when data block
overlap in holding patterns or in proximity of the final
approach create an unworkable situation. If necessary
to suspend tracks, those which are not displaying
automatic altitude readouts must be suspended. If the
condition still exists, those displaying automaticaltitude readouts may then be suspended.
JO 7110.65W 12/10/15
6−1−1 GeneralChapter 6. Nonradar
Section 1. General
6−1−1. DISTANCE
Use mileage−based (DME and/or ATD) procedures and
minima only when direct pilot/controller communi-cations are maintained.
6−1−2. NONRECEIPT OF POSITION
REPORT
When a position report affecting separation is not
received, take action to obtain the report no later than
5 minutes after the aircraft was estimated over the fix.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−7, IFR Military Training Routes.
6−1−3. DUPLICATE POSITION REPORTS
Do not require an aircraft to make the same position
report to more than one facility.
6−1−4. ADJACENT AIRPORT OPERATION
TERMINAL
WAKE TURBULENCE APPLICATION
The ATC facility having control jurisdiction at
adjacent airports must separate arriving or departingIFR aircraft on a course that will cross the flight path
of an aircraft requiring wake turbulence separation in
accordance with the following:
a.Heavy, lar ge, or small behind super − 3 minutes.
b.Heavy, large, or small behind heavy − 2
minutes.
c.Small behind B757 - 2 minutes.FIG 6−1−1
Adjacent Airport Operation −− Arrival
FIG 6−1−2
Adjacent Airport Operation −− Departure
6−1−5. ARRIVAL MINIMA
TERMINAL
WAKE TURBULENCE APPLICATION
a.Separate IFR aircraft landing behind an arriving
aircraft to the same runway:
1.Behind super:
(a)Heavy or large − 3 minutes.
(b)Small − 4 minutes.
2.Behind heavy:
(a)Heavy or large − 2 minutes.
(b)Small − 3 minutes.
3.Small behind B757 − 3 minutes.
b.Separate IFR aircraft landing behind an arriving
aircraft to a parallel runway separated by less than
JO 7110.65W 12/10/15
6−1−2 General2,500 feet, or a crossing runway if projected flight
paths will cross:
1.Heavy, large, or small behind super − 3
minutes.
2.Heavy, large, or small behind heavy − 2
minutes.
3.Small behind B757 − 2 minutes.FIG 6−1−3
Arrival Minima Landing Behind an Arriving
Aircraft Requiring Wake Turbulence Separation
JO 7110.65W 12/10/15
6−2−1 Initial Separation of Successive Departing AircraftSection 2. Initial Separation of Successive
Departing Aircraft
6−2−1. MINIMA ON DIVERGING COURSES
Separate aircraft that will fly courses diverging by
45 degrees or more after departing the same oradjacent airports by use of one of the following
minima:
NOTE−
1.Consider known aircraft performance characteristics
when applying initial separation to successive departing
aircraft.
2.When one or both of the departure surfaces is a helipad,
use the takeoff course of the helicopter as a reference,
comparable to the centerline of a runway and the helipadcenter as the threshold.
a.When aircraft will fly diverging courses:
1.Immediately after takeoff − 1 minute until
courses diverge. (See FIG 6−2−1.)
FIG 6−2−1
Minima on Diverging Courses
2.Within 5 minutes after takeoff − 2 minutes
until courses diverge. (See FIG 6−2−2.)
FIG 6−2−2
Minima on Diverging Courses
3.Within 13 miles DME/ATD after takeoff −
3 miles until courses diverge. (See FIG 6−2−3.)
FIG 6−2−3
Minima on Diverging Courses
JO 7110.65W 12/10/15
6−2−2 Initial Separation of Successive Departing Aircraftb.TERMINAL .Between aircraft departing in the
same direction from different runways whose
centerlines are parallel and separated by at least
3,500 feet, authorize simultaneous takeoffs when the
aircraft will fly diverging courses immediately aftertakeoff. (See FIG 6−2−4.)
FIG 6−2−4
Minima on Diverging Courses
c.TERMINAL. Between aircraft that will fly
diverging courses immediately after takeoff fromdiverging runways: (See FIG 6−2−5.)
1.Nonintersecting runways. Authorize simul-
taneous takeoffs when either of the following
conditions exist:
(a)The runways diverge by 30 degrees or
more.
(b)The distance between runway centerlines
at and beyond the points where takeoffs begin is at
least:
(1)2,000 feet and the runways diverge by
15 to 29 degrees inclusive.
(2)3,500 feet and the runways diverge by
less than 15 degrees.FIG 6−2−5
Minima on Diverging Courses
2.Intersecting runways. Authorize takeoff of a
succeeding aircraft when the preceding aircraft has
passed the point of runway intersection, and
(a)The runways diverge by 30 degrees or
more. (See FIG 6−2−6.)
FIG 6−2−6
Minima on Diverging Courses
JO 7110.65W 12/10/15
6−2−3 Initial Separation of Successive Departing Aircraft(b)The runways diverge by 15 to 29 degrees
inclusive and the preceding aircraft has commenced
a turn. (See FIG 6−2−7.)
FIG 6−2−7
Minima on Diverging Courses
6−2−2. MINIMA ON SAME COURSE
Separate aircraft that will fly the same course when
the following aircraft will climb through the altitude
assigned to the leading aircraft by using a minimum
of 3 minutes until the following aircraft passes
through the assigned altitude of the leading aircraft;
or 5 miles between DME equipped aircraft; RNA V
equipped aircraft using A TD; and between DME and
ATD aircraft provided the DME aircraft is either10,000 feet or below or outside of 10 miles from the
DME NA V AID. (See FIG 6−2−8 and FIG 6−2−9.)
FIG 6−2−8
Minima on Same Course
FIG 6−2−9
Minima on Same Course
JO 7110.65W 12/10/15
6−3−1 Initial Separation of Departing and Arriving AircraftSection 3. Initial Separation of Departing
and Arriving Aircraft
6−3−1. SEPARATION MINIMA
a.Separate a departing aircraft from an arriving
aircraft making an instrument approach to the sameairport by using one of the following minima until
vertical or lateral separation is achieved:
b.TERMINAL. When takeoff direction differs by
at least 45 degrees from the reciprocal of the finalapproach course, the departing aircraft takes off
before the arriving aircraft leaves a fix inbound not
less than 4 miles from the airport.
c.TERMINAL. When takeoff direction is other
than in subpara a, the departing aircraft takes off so
that it is established on a course diverging by at least
45 degrees from the reciprocal of the final approachcourse before the arriving aircraft leaves a fix
inbound not less than 4 miles from the airport.
d.TERMINAL .When the absence of an appropri-
ate fix precludes the application of subparas b or c and
at airports where approach control service is not
provided, the separation in subparas e or f must be
applied.
e.When takeoff direction differs by at least
45 degrees from the reciprocal of the final approach
course, the departing aircraft takes off 3 minutes
before the arriving aircraft is estimated at the airport.
(See FIG 6−3−1.)
FIG 6−3−1
Separation Minima
f.When takeoff direction is other than in
subpara d, the departing aircraft takes off so that it is
established on a course diverging by at least
45 degrees from the reciprocal of the final approach
course 5 minutes before the arriving aircraft is
estimated at the airport or before it starts procedure
turn. (See FIG 6−3−2 and FIG 6−3−3.)
FIG 6−3−2
Separation Minima
FIG 6−3−3
Separation Minima
JO 7110.65W 12/10/15
6−4−1 Longitudinal SeparationSection 4. Longitudinal Separation
6−4−1. APPLICATION
Separate aircraft longitudinally by requiring them to
do one of the following, as appropriate:
a.Depart at a specified time.
b.Arrive at a fix at a specified time.
PHRASEOLOGY −
CROSS (fix) AT OR BEFORE (time).
CROSS (fix) AT OR AFTER (time).
c.Hold at a fix until a specified time.
d.Change altitude at a specified time or fix.
REFERENCE −
F AAO JO 7110.65, Para 4 −5−7, Altitude Information.
6−4−2. MINIMA ON SAME, CONVERGING,
OR CROSSING COURSES
Separate aircraft on the same, converging, or crossing
courses by an interval expressed in time or distance,
using the following minima:
a.When the leading aircraft maintains a speed at
least 44 knots faster than the following aircraft −
5 miles between DME equipped aircraft; RNA V
equipped aircraft using A TD; and between DME and
ATD aircraft provided the DME aircraft is either
10,000 feet or below or outside of 10 miles from the
DME NA V AID, or 3 minutes between other aircraft
if, in either case, one of the following conditions is
met:1.A departing aircraft follows a preceding
aircraft which has taken off from the same or adjacent
airport. (See FIG 6−4−1.)
FIG 6−4−1
Minima on Same Course
44 Knots or More Separation
2.A departing aircraft follows a preceding
en route aircraft which has reported over a fix serving
the departure airport. (See FIG 6−4−2.)
FIG 6−4−2
Minima on Converging Courses
44 Knots or More Separation
JO 7110.65W 12/10/15
6−4−2 Longitudinal Separation3.An en route aircraft follows a preceding en
route aircraft which has reported over the same fix.
(See FIG 6−4−3.)
FIG 6−4−3
Minima on Crossing Courses
44 Knots or More Separation
b.When the leading aircraft maintains a speed at
least 22 knots faster than the following aircraft −
10 miles between DME equipped aircraft; RNA V
equipped aircraft using A TD; and between DME and
ATD aircraft provided the DME aircraft is either
10,000 feet or below or outside of 10 miles from the
DME NA V AID; or 5 minutes between other aircraft
if, in either case, one of the following conditions
exists:
1.A departing aircraft follows a preceding
aircraft which has taken off from the same or anadjacent airport. (See FIG 6−4−4.)
FIG 6−4−4
Minima on Same Course
22 Knots or More Separation
2.A departing aircraft follows a preceding
en route aircraft which has reported over a fix serving
the departure airport. (See FIG 6−4−5.)
FIG 6−4−5
Minima on Converging Courses
22 Knots or More Separation
3.An en route aircraft follows a preceding
en route aircraft which has reported over the same fix.
(See FIG 6−4−6.)
FIG 6−4−6
Minima on Crossing Courses
22 Knots or More Separation
JO 7110.65W 12/10/15
6−4−3 Longitudinal Separationc.When an aircraft is climbing or descending
through the altitude of another aircraft:
1.Between DME equipped aircraft; RNA V
equipped aircraft using A TD; and between DME and
ATD aircraft provided the DME aircraft is either
10,000 feet or below or outside of 10 miles from the
DME NA V AID − 10 miles, if the descending aircraft
is leading or the climbing aircraft is following.
(See FIG 6−4−7 and FIG 6−4−8.)
FIG 6−4−7
Descending Through Another Aircraft’s
Altitude DME Separation
FIG 6−4−8
Climbing Through Another Aircraft’s
Altitude DME Separation
2.Between other aircraft − 5 minutes , if all of the
following conditions are met:
(See FIG 6−4−9 and FIG 6−4−10.)
(a)The descending aircraft is leading or
climbing aircraft is following.
(b)The aircraft are separated by not more
than 4,000 feet when the altitude change started.
(c)The change is started within 10 minutes
after a following aircraft reports over a fix reportedover by the leading aircraft or has acknowledged a
clearance specifying the time to cross the same fix.3.Between RNA V aircraft that are operating
along an RNA V route that is eight miles or less in
width−10 miles provided the following conditions
are met:
(a)The descending aircraft is leading or the
climbing aircraft is following.
(b)The aircraft were separated by not more
than 4,000 feet when the altitude change started.
FIG 6−4−9
Descending Through Another
Aircraft’s Altitude Timed Separation
FIG 6−4−10
Climbing Through Another
Aircraft’s Altitude Timed Separation
JO 7110.65W 12/10/15
6−4−4 Longitudinal Separationd.When the conditions of subparas a, b, or c
cannot be met − 20 miles between DME equipped
aircraft; RNA V equipped aircraft using ATD; and
between DME and ATD aircraft provided the DME
aircraft is either 10,000 feet or below or outside of10 miles from the DME NA V AID; or 10 minutes
between other aircraft.
(See FIG 6−4−11, FIG 6 −4−12, FIG 6 −4−13,
FIG 6−4−14, FIG 6 −4−15, and FIG 6−4−16.)
FIG 6−4−11
Minima for Same Course Separation
FIG 6−4−12
Minima for Crossing Courses Separation
FIG 6−4−13
Minima for Same Course Separation
FIG 6−4−14
Minima for Crossing Courses Separation
FIG 6−4−15
Climbing Through Another
Aircraft’s Altitude Separation
FIG 6−4−16
Descending Through Another
Aircraft’s Altitude Separation
JO 7110.65W 12/10/15
6−4−5 Longitudinal Separatione.Between aircraft, when one aircraft is using
DME/ATD and the other is not − 30 miles if both the
following conditions are met:
(See FIG 6−4−17 and FIG 6−4−18.)
FIG 6−4−17
Minima for Same Course Separation
FIG 6−4−18
Minima for Crossing Courses Separation
1.The aircraft using DME/ATD derives dis-
tance information by reference to the same NA V AID
or waypoint over which the aircraft not using
DME/ATD has reported.
2.The aircraft not using DME/ATD is within
15 minutes of the NA V AID.
6−4−3. MINIMA ON OPPOSITE COURSES
Separate aircraft traveling opposite courses by
assigning different altitudes consistent with the
approved vertical separation from 10 minutes before,
until 10 minutes after they are estimated to pass.
Vertical separation may be discontinued after one of
the following conditions is met: (See FIG 6−4−19.)FIG 6−4−19
Minima for Opposite Courses Separation
NOTE−
RNAV route segments that have been expanded in the
proximity to reference facilities for slant-range effect arenot to be considered “expanded” for purposes of applyingseparation criteria in this paragraph.
a.Both aircraft have reported passing NA V AIDs,
DME fixes, or waypoints indicating they have passed
each other. (See FIG 6−4−20.)
FIG 6−4−20
Minima for Opposite Courses Separation
NOTE−
It is not intended to limit application of this pr ocedure only
to aircraft operating in opposite directions along the sameairway or radial. This procedure may also be applied toaircraft established on diver ging airways or radials of the
same NAVAID.
b.Both aircraft have reported passing the same
intersection/waypoint and they are at least 3 minutes
apart.
c.Two RNA V aircraft have reported passing the
same position and are at least 8 miles apart if
operating along a route that is 8 miles or less in width;
or 18 miles apart if operating along an expanded
route; except that 30 miles must be applied if
operating along that portion of any route segment
JO 7110.65W 12/10/15
6−4−6 Longitudinal Separationdefined by a navigation station requiring extended
usable distance limitations beyond 130 miles.
d.An aircraft utilizing RNA V and an aircraft
utilizing VOR have reported passing the same
position and the RNA V aircraft is at least 4 miles
beyond the reported position when operating along a
route that is 8 miles or less in width; 9 miles beyond
the point when operating along an expanded route;
except that 15 miles must be applied if operating
along that portion of any route segment defined by a
navigation station requiring extended usable distance
limitation beyond 130 miles; or 3 minutes apart
whichever is greater.
NOTE−
Except for GNSS-equipped air craft /G, /L, /S, and /V , not on
a random impromptu r oute, Paragraph 5-5-1, Application,
requires radar separation be provided to RNAV aircraftoperating at and below FL450 on Q routes or random
RNAV routes, excluding oceanic airspace.
6−4−4. SEPARATION BY PILOTS
When pilots of aircraft on the same course in directradio communication with each other concur, you
may authorize the following aircraft to maintain
longitudinal separation of 10 minutes; or 20 miles
between DME equipped aircraft; RNA V equipped
aircraft using ATD; and between DME and ATDaircraft provided the DME aircraft is either
10,000 feet or below or outside of 10 miles from the
DME NA V AID.
PHRASEOLOGY −
MAINTAIN AT LEAST ONE ZERO MINUTES/
TWO ZERO MILES SEP ARATION FROM (ident).
6−4−5. RNAV AIRCRAFT ALONG VOR
AIRWAYS/ROUTES
Advise the pilot to use DME distances when applying
DME separation to an RNA V aircraft operating along
VOR airways/routes.
PHRASEOLOGY −
USE DME DISTANCES.
NOTE−
ATD derived from area navigation devices having
slant-range correction will not coincide with the direct
DME readout.
JO 7110.65W 12/10/15
6−5−1 Lateral SeparationSection 5. Lateral Separation
6−5−1. SEPARATION METHODS
Separate aircraft by one of the following methods:
a.Clear aircraft on different airways or routes
whose widths or protected airspace do not overlap.
b.Clear aircraft below 18,000 to proceed to and
report over or hold at dif ferent geographical locations
determined visually or by reference to NA V AIDs.
c.Clear aircraft to hold over different fixes whose
holding pattern airspace areas do not overlap each
other or other airspace to be protected.
d.Clear departing aircraft to fly specified
headings which diverge by at least 45 degrees.
6−5−2. MINIMA ON DIVERGING RADIALS
a.Consider separation to exist between aircraft:
1.Established on radials of the same NA V AID
that diverge by at least 15 degrees when either aircraft
is clear of the airspace to be protected for the otheraircraft.
2.With non −VOR/DME based navigational
equipment established on tracks of the samewaypoint that diverge by at least 15 degrees when
either aircraft is clear of the airspace to be protected
for the other aircraft.
FIG 6−5−1
Minima on Diverging Radials
NOTE−
The procedure may be applied to converging as well asdiverging aircraft. (See FIG 6−5−1.) The aircraft depicted
6 miles from the NA VAID/waypoint would require verticalseparation until reaching the 6 −mile point. Reversing
direction, the same aircraft would require verticalseparation before passing the 6 −mile point. Due to the
nature of GPS equipment, issue crossing restrictions in
reference to the next way point, since the pilot receives
tracking “to” data rather than tracking “from” the lastwaypoint.
b.Use TBL 6 −5−1 and TBL 6 −5−2 to determine
the distance required for various divergence angles to
clear the airspace to be protected. For divergence that
falls between two values, use the lesser divergencevalue to obtain the distance.
TBL 6−5−1
Non−DME Diverg ence
Distance Minima
Divergence (Degrees) Distance (NM)
NOTE: This table is for non −DME application only.
TBL 6−5−2
Divergence
Distance Minima
Divergence
(Degrees)Distance (NM)
Below FL 180Fl 180 through
FL 450
NOTE: This table is for DME application and
compensates for DME slant-range error.
JO 7110.65W 12/10/15
6−5−2 Lateral SeparationNOTE−
For altitudes of 3,000 feet or less above the elevation of the
NAVAID, DME slant-range erro r is negligible and the
values in TBL 6 −5−1 may be used.
6−5−3. DME ARC MINIMA
Apply lateral DME separation by requiring aircraft
using DME to fly an arc about a NA V AID at a
specified distance using the following minima:
(See FIG 6−5−2.)
FIG 6−5−2
DME Arc Minima
REFERENCE −
F AAO JO 7110.65, Para 2 −5−2, NAVAID Terms.
a.Between different arcs about a NA V AID
regardless of direction of flight:
1.At 35 miles or less from the NA V AID −
10 miles.
2.More than 35 miles from the NA V AID −
20 miles.
b.Between an arc about a NA V AID and other
airspace to be protected: (See FIG 6−5−3.)
FIG 6−5−3
DME Arc Minima
NOTE−
The other airspace to be protected may be a MOA, aholding pattern, airway or route, ATCAA, Warning Area,Restricted Area, Prohibited Area, etc.
1.At 35 miles or less from the NA V AID −
5 miles .
2.More than 35 miles from the NA V AID −
10 miles.
PHRASEOLOGY −
VIA (number of miles) MILE ARC (direction) OF (name ofDME NAVAID).
6−5−4. MINIMA ALONG OTHER THAN
ESTABLISHED AIRWAYS OR ROUTES
Protect airspace along other than established airways
or routes as follows: (See FIG 6−5−4.)
FIG 6−5−4
Minima Along Other Than
Established Airways or Routes
REFERENCE −
P/CG Term − Airway.
P/CG Term − Route.
a.Direct courses and course changes of 15 degrees
or less:
1.Via NA V AIDs or radials FL 600 and below −
4 miles on each side of the route to a point 51 miles
from the NA V AID, then increasing in width on a4
1/2degree angle to a width of 10 miles on each side
of the route at a distance of 130 miles from the
NA V AID.
2.Via degree-distance fixes for aircraft author-
ized under para 4 −4−3, Degree −Distance Route
Definition for Military Operations.
(a)Below FL 180 − 4 miles on each side of the
route.
JO 7110.65W 12/10/15
6−5−3 Lateral Separation(b)FL 180 to FL 600 inclusive − 10 miles on
each side of the route.
3.Via degree-distance fixes for RNA V flights
above FL 450 − 10 miles on each side of the route.
NOTE−
Except for GNSS-equipped air craft /G, /L, /S, and /V , not on
a random impromptu r oute, Paragraph 5-5-1, Application,
requires radar separation be provided to RNAV aircraftoperating at and below FL450 on Q routes or random
RNAV routes, excluding oceanic airspace.
REFERENCE −
F AAO JO 7110.65, Para 4-4-2, Route Structure Transitions.
F AAO JO 7110.65, Para 5-5-1, Application.P/CG Term - Global Navigation Satellite System (GNSS)[ICAO].
4.GNSS-equipped RNA V aircraft provided
non-radar separation on random RNA V routes must
be cleared via or reported to be established on
point-to-point route segments.
(a)The points must be published NA V AIDs,
waypoints, fixes, or airports recallable from the
aircraft’s navigation database. The points must bedisplayed on controller video maps or depicted on the
controller chart displayed at the control position. The
maximum distance between points must not exceed500 miles.
(b)Protect 4 miles either side of the route
centerline.
(c)Assigned altitudes must be at or above the
highest MIA along the projected route segment being
flown, including the protected airspace of that route
segment.
(d)When the GNSS aircraft is being provided
radar service and is transitioning to non-radar
airspace, provide clearance direct to the named point
in non-radar airspace in accordance with subpara-graphs a4(a) through (c).
EXAMPLE −
A pilot has filed a point-to-point route from XYZ to ABC at13,000 feet. Departure procedures from the originatingairport place the aircraft a significant distance from XYZ;
however , the aircraft can establish itself along the route
segment from XYZ to ABC. Ascertain when the pilot is
established on the point-to-point route segment and at analtitude, which meets or exceeds the highest MVA/MIAprojected along the route of flight, then issue a clearance.
“Verify when you are established on the XYZ to ABC r oute
segment at or above 6,000 feet.”
REFERENCE −
F AAO JO 7110.65, Para 4-4-2, Route Structure Transitions
F AAO JO 7110.65, Para 5-5-1, Application
b.When course change is 16 degrees through
90 degrees, protect the airspace on the overflown side
beginning at the point where the course changes as
follows: (See FIG 6−5−5.)
FIG 6−5−5
Overflown Side Minima
16 to 90 Degrees
1.Below FL 180 − same as subparas a1 or 2.
2.FL 180 to FL 230 inclusive − 14 miles.
3.Above FL 230 to FL 600 inclusive − 17 miles.
c.When course change is 91 degrees through
180 degrees, protect the airspace on the overflown
side beginning at the point where the course changes
as follows: (See FIG 6−5−6.)
1.Below FL 180 − same as subparas a1 or 2.
2.FL 180 to FL 230 inclusive − 28 miles.
3.Above FL 230 to FL 600 inclusive − 34 miles .
JO 7110.65W 12/10/15
6−5−4 Lateral SeparationFIG 6−5−6
Overflown Side Minima
91 to 180 Degrees
d.After the course changes specified in sub-
paras b or c have been completed and the aircraft is
back on course, the appropriate minima in subpara a
may be used.
6−5−5. RNAV MINIMA − DIVERGING/
CROSSING COURSES
Consider lateral separation to exist when an RNA V
aircraft is beyond the point where the lateral protected
airspace of that aircraft has ceased to overlap the
lateral protected airspace of another by at least: (See FIG 6−5−7 and FIG 6−5−8.)FIG 6−5−7
RNA V Minima
a.When operating along a route that is 8 miles or
less in width − 4 miles.
b.When operating along an expanded route −
9 miles, except that 15 miles must be applied along
that portion of any route segment requiring extended
usable distance limitation beyond 130 miles of the
reference facility.
NOTE−
Except for GNSS-equipped air craft /G, /L, /S, and /V , not on
a random impromptu r oute, Paragraph 5-5-1, Application,
requires radar separation be provided to RNAV aircraft
operating at and below FL450 on Q routes or randomRNAV routes, excluding oceanic airspace.
FIG 6−5−8
RNA V Minima
JO 7110.65W 12/10/15
6−6−1 Vertical SeparationSection 6. Vertical Separation
6−6−1. APPLICATION
Assign an altitude to an aircraft after the aircraft
previously at that altitude has reported leaving thealtitude.
PHRASEOLOGY −
REPORT LEAVING/REACHING (altitude/flight level).
REPORT LEAVING ODD/EVEN ALTITUDES/FLIGHT
LEVELS.
(If aircraft is known to be operating below the lowest
useable flight level),
SAY ALTITUDE.
or
(If aircraft is known to be operating at or above the lowest
useable flight level),
SAY FLIGHT LEVEL.
or
If aircraft’ s position relative to the lowest useable flight
level is unknown),
SAY ALTITUDE OR FLIGHT LEVEL.
NOTE−
Consider known aircraft performance characteristics,pilot furnished and/or Mode C detected information which
indicate that climb/descent will not be consistent with the
rates recommended in the AIM.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−3, Procedural Preference.
F AAO JO 7110.65, Para 4 −5−1, Vertical Separation Minima.
F AAO JO 7110.65, Para 7 −7−3, Separation.
F AAO JO 7110.65, Para 7 −8−3, Separation.
F AAO JO 7110.65, Para 7 −9−4, Separation.6−6−2. EXCEPTIONS
Assign an altitude to an aircraft only after the aircraft
previously at that altitude has reported at or passing
through another altitude separated from the first by
the appropriate minimum when:
a.Severe turbulence is reported.
b.Aircraft are conducting military aerial
refueling.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−13, Military Aerial Refueling.
c.The aircraft previously at the altitude has been:
1.Issued a clearance permitting climb/descent
at pilot’s discretion.
2.Cleared to CRUISE (altitude). However, do
not use Mode C to effect separation with an aircrafton a cruise clearance.
NOTE−
An aircraft assigned a cruise clearance is assigned a blockof airspace from the minimum IFR altitude up to andincluding the assigned cruising altitude, and climb/descent
within the block is at pilot’ s discretion. When the pilot
verbally r eports leaving an altitude in descent, he/she may
not return to that altitude.
REFERENCE −
P/CG Term − Cruise.
6−6−3. SEPARATION BY PILOTS
When pilots of aircraft in direct radio communication
with each other d uring climb and descent concur, you
may authorize the lower aircraft, if climbing, or theupper aircraft, if descending, to maintain vertical
separation.
JO 7110.65W 12/10/15
6−7−1 Timed ApproachesSection 7. Timed Approaches
6−7−1. APPLICATION
Timed approaches using either nonradar procedures
or radar vectors to the final approach course may beused at airports served by a tower if the following
conditions are met:
NOTE−
These procedures require NAVAIDs and standard/specialinstrument approach procedures or adequate radar
coverage which permit an aircraft to:
1.Hold at a fix located on the approach course or to be
radar vectored to the final approach course for astraight-in approach in accordance with the minima
specified in para 6 −7−5, Interval Minima.
2.Proceed in the direction of the airport along the
approach course crossing the holding/approach fix at aspecified altitude if required.
3.Continue descent for an approach to destination
airport.
a.Direct communication is maintained with the
aircraft until the pilot is instructed to contact thetower.
b.If more than one missed approach procedure is
available, none require course reversal.
c.If only one missed approach procedure is
available, the following conditions are met:
1.Course reversal is not required.
2.Reported ceiling and visibility are equal to or
greater than the highest prescribed circling mini-
mums for the instrument approach procedure in use.
NOTE−
Determination of whether or not an existing ceiling meets
minima is accomplished by comparing MDA (MSL) with
ceiling (AGL) plus the airport elevation.
REFERENCE −
F AAO JO 7110.65, Para 6 −7−2, Approach Sequence.
6−7−2. APPROACH SEQUENCE
When an aircraft passes the final approach fix
inbound (nonprecision approach) or the outer marker
or the fix used in lieu of the outer marker inbound(precision approach), issue clearances for a succeed-
ing timed approach in accordance with the following:REFERENCE −
F AAO JO 7110.65, Para 5 −9−5, Approach Separation Responsibility.
F AAO JO 7110.65, Para 6 −7−4, Level Flight Restriction.
F AAO JO 7110.65, Para 6 −7−7, Missed Approaches.
a.Clear the succeeding aircraft for approach, to
descend to the altitude vacated by the preceding
aircraft, and to leave the final approach fix inbound
(nonprecision approach) or the outer marker or the fix
used in lieu of the outer marker inbound (precision
approach) at a specified time; or when using radar to
sequence and position aircraft on the final approach
course, vector aircraft to cross the final approach
fix/outer marker or the fix used in lieu of the outermarker in compliance with para 6 −7−5,
Interval
Minima .
FIG 6−7−1
Timed Approach Procedures
Using ILS and Longitudinal Separation Only
NOTE−
FIG 6−7−1 depicts the application of timed approach
procedures using an ILS and applying longitudinal
separation only. Using an interval of 2 minutes betweensuccessive approaches, the #1 and #2 aircraft have alr eady
passed the outer locator (LOM) on final approach, and the
#3 aircraft has been cleared for approach and to depart the
LOM 2 minutes after the #2 aircraft reported leaving the
LOM inbound on final approach. After aircraft in theapproach sequence depart the holding/approach fix(LOM) inbound, vertical separation is no longer provided
and longitudinal separation is utilized.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−2, Final Approach Course Interception.
JO 7110.65W 12/10/15
6−7−2 Timed Approachesb.If an alternative missed approach procedure is
not available and weather conditions are less than
required by para 6−7−1, Application, subpara c, clear
the succeeding aircraft for an approach when the
preceding aircraft has landed or canceled its IFRflight plan.
FIG 6−7−2
Timed Approach Procedures Using a Bearing on an
NDB and Longitudinal and Vertical Separation
NOTE−
FIG 6−7−2 depicts the application of timed approach
procedures using a holding/appr oach fix on a bearing of an
NDB and applying a combination of longitudinal andvertical separation. The #3 aircraft has been instructed to
descend to 2,000 after the #2 aircraft has reported
departing the holding/approach fix inbound and leaving
2,000 at point A. The #2 aircraft has departed theholding/approach fix inbound at the designated time,maintaining 2,000 until cleared for approach at point A.The #1 aircraft has been sighted, enabling the controller to
issue approach clearance to the #2 aircraft at point A.
c.Release the aircraft to the tower before it reaches
the final approach fix.
6−7−3. SEQUENCE INTERRUPTION
Interrupt the established timed approach sequence if
necessary to allow an aircraft to execute a different
type of approach.
6−7−4. LEVEL FLIGHT RESTRICTION
If the weather report indicates an aircraft will be in
IFR conditions over the final approach fix
(nonprecision approach) or the outer marker or the fix
used in lieu of the outer marker (precision approach)when para 6 −7−2, Approach Sequence, subpara b is
applied, clear the second aircraft for an approach
early enough to allow at least 1 minute of level flight
before crossing the final approach fix/outer marker or
the fix used in lieu of the outer marker.
6−7−5. INTERVAL MINIMA
Use the following time or radar interval as the
minimum interval between successive approaches:
REFERENCE −
F AAO JO 7110.65, Para 5 −9−5, Approach Separation Responsibility.
F AAO JO 7110.65, Para 6 −7−1, Application.
F AAO JO 7110.65, Para 6 −7−2, Approach Sequence.
a.Behind super:
1.Heavy − 3 minutes or 6 miles.
2.Large − 3 minutes or 7 miles.
3.Small − 4 minutes or 8 miles.
b.Behind heavy:
1.Heavy − 2 minutes or 4 miles.
2.Large − 2 minutes or 5 miles.
3.Small − 3 minutes or 6 miles.
c.Small behind B757 − 2 minutes or 4 miles.
d.Increase the interval, as necessary, taking into
account the:
1.Relative speeds of the aircraft concerned.
2.Existing weather conditions.
3.Distance between the approach fix and the
airport.
4.Type of approach being made.
6−7−6. TIME CHECK
Issue a time check to an aircraft before specifying a
time to leave the approach fix inbound unless the
aircraft is vectored to the final approach course.
6−7−7. MISSED APPROACHES
a.If weather conditions are such that an aircraft
will likely miss an approach, issue an alternativemissed approach procedure to the next aircraft.
b.If an aircraft misses an approach, allow the next
aircraft to continue the approach if it has been
assigned an alternative missed approach procedure.
Retain radar control or hold any remaining aircraft at
JO 7110.65W 12/10/15
6−7−3 Timed Approachesassigned altitudes until traffic conditions permit the
issuance of approach clearances.
c.When para 6 −7−2, Approach Sequence, sub-
para b is applied and the first aircraft misses an
approach, retain radar control or clear the second
aircraft to maintain the last assigned altitude(minimum holding altitude) and return to theholding/approach fix to hold until traffic conditions
permit the issuance of approach clearances.
JO 7110.65W 12/10/15
7−1−1 GeneralChapter 7. Visual
Section 1. General
7−1−1. CLASS A AIRSPACE
RESTRICTIONS
Do not apply visual separation or issue VFR or
“VFR-on-top” clearances in Class A airspace.
7−1−2. VFR CONDITIONS
a.You may clear aircraft to maintain “VFR
conditions” if one of the following conditions exists:
1.The pilot of an aircraft on an IFR flight plan
requests a VFR climb/descent.
2.TERMINAL .The clearance will result in
noise abatement benefits where part of the IFR
departure route does not conform to an FAA-approved noise abatement route or altitude.
PHRASEOLOGY −
MAINTAIN VFR CONDITIONS.
MAINTAIN VFR CONDITIONS UNTIL (time or fix).
MAINTAIN VFR CONDITIONS ABOVE/BELOW
(altitude).
CLIMB/DESCEND VFR,
and if required,BETWEEN (altitude) AND (altitude)
or
ABOVE/BELOW (altitude).
b.When, in your judgment, there is reason to
believe that flight in VFR conditions may become
impractical, issue an alternative clearance which will
ensure separation from all other aircraft for whichyou have separation responsibility.
PHRASEOLOGY −
IF UNABLE, (alternative procedure), AND ADVISE.7−1−3. APPROACH CONTROL SERVICE
FOR VFR ARRIVING AIRCRAFT
Issue the following where procedures have been
established for arriving VFR aircraft to contactapproach control for landing information:
a.Wind, runway, and altimeter setting at the
airport of intended landing. This information may be
omitted if contained in the ATIS broadcast and the
pilot states the appropriate ATIS code or if the pilotuses the phrase, “have numbers.”
NOTE−
Pilot use of “have numbers” does not indicate receipt of the
ATIS broadcast.
b.Traffic information on a workload permitting
basis.
c.Time or place at which the aircraft is to contact
the tower on local control frequency for furtherlanding information.
d.An aircraft may be instructed to contact
approach control for landing and traffic information
upon initial contact with the tower.
REFERENCE −
F AAO JO 7110.65, Para 7 −6−1, Application.
F AAO JO 7110.65, Para 7 −6−2, Service Availability.
7−1−4. VISUAL HOLDING OF VFR
AIRCRAFT
TERMINAL
When it becomes necessary to hold VFR aircraft at
visual holding fixes, take the following actions:
a.Clear aircraft to hold at selected, prominent
geographical fixes which can be easily recognized
from the air, preferably those depicted on sectional
charts.
NOTE−
At some locations, VFR checkpoints are depicted on
Sectional Aeronautical and Terminal Area Charts. Inselecting geographical fixes, depicted VFR checkpointsare preferred unless the pilot exhibits a familiarity with the
local area.
REFERENCE −
F AAO JO 7110.65, Para 4 −6−5, Visual Holding Points.
JO 7110.65W 12/10/15
7−1−2 Generalb.Issue traffic information to aircraft cleared to
hold at the same fix.
PHRASEOLOGY −
HOLD AT (location) UNTIL (time or other condition),
TRAFFIC (description) HO LDING AT (fix, altitude if
known),
or
PROCEEDING TO (fix) FROM (direction or fix).
REFERENCE −
F AAO JO 7110.65, Para 7 −6−5, Holding.
JO 7110.65W 12/10/15
7−2−1 Visual SeparationSection 2. Visual Separation
7−2−1. VISUAL SEPARATION
Visual separation may be applied when other
approved separation is assured before and after the
application of visual separation. To ensure that other
separation will exist, consider aircraft performance,wake tur bulence, closure rate, routes of flight, known
weather conditions, and aircraft position. Weather
conditions must allow the aircraft to remain within
sight until other separation exists.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−20, Wake Turbulence Cautionary
Advisories.
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
F AAO JO 7110.65, Para 3 −1−9, Use of Tower Radar Displays.
F AAO JO 7110.65, Para 5 −9−5, Approach Separation Responsibility.
F AAO JO 7110.65, Para 7 −4−1, Visual Approach.
F AAO JO 7110.65, Para 7 −4−2, Vectors for Visual Approach.
F AAO JO 7110.65, Para 7 −4−4, Approaches to Multiple Runways.
P/CG Term − Visual Approach.
P/CG Term − Visual Separation.
a.TERMINAL. V isual separation may be applied
between aircraft up to but not including FL180 under
the following conditions:
1.Tower-applied visual separation.
(a)Maintain communication with at least one
of the aircraft involved or ensure there is an ability to
communicate immediately with applicable military
aircraft as prescribed in Paragraph 3-9-3, Departure
Control Instructions, subparagraph a2.
(b)The tower visually observes the aircraft,
issues timely traffic advisories, and provides visual
separation between the aircraft.
(c)Issue control instructions as necessary to
ensure continued separation between the applicable
aircraft.
(d)Do not apply visual separation between
successive departures when departure routes and/or
aircraft performance preclude maintaining separa-
tion.
(e)The use of tower -applied visual separation
is not authorized when wake turbulence separation is
required.
(f)Adjacent airports with operating ATCTs
are not authorized to apply visual separation between
their traffic and the other ATCT’s traffic.2.Pilot-applied visual separation.
(a)Maintain communication with at least one
of the aircraft involved and ensure there is an ability
to communicate with the other aircraft.
(b)The pilot sees another aircraft and is
instructed to maintain visual separation from the
aircraft as follows:
(1)Tell the pilot about the other aircraft.
Include position, direction, type, and, unless it is
obvious, the other aircraft’s intention.
(2)Obtain acknowledgment from the pilot
that the other aircraft is in sight.
(3)Instruct the pilot to maintain visual
separation from that aircraft.
PHRASEOLOGY −
(ACID), TRAFFIC, (clock position and distance),
(direction) BOUND, (type of aircraft), (intentions and
other relevant information).
If required,
(ACID), REPORT TRAFFIC IN SIGHT or DO YOU HAVE
IT IN SIGHT?
If the pilot reports traffic in sight, or the answer is in the
affirmative,
(ACID), MAINTAIN VISUAL SEP ARATION
NOTE−
Towers must use the procedures contained in Paragraph
3-1-6, Traffic Information, Subparagraph b or c, as
appropriate.
(c)If the pilot reports the traffic in sight and
will maintain visual separation from it (the pilot must
state both), the controller may “approve” the
operation instead of restating the instructions.
PHRASEOLOGY −
(ACID), APPROVED.
NOTE−
Pilot-applied visual separation between aircraft is
achieved when the controller has instructed the pilot to
maintain visual separation and the pilot acknowledgeswith their call sign or when the controller has approved
pilot-initiated visual separation.
REFERENCE −
F AAO JO 7110.65, Para 5-4-5, Transferring Controller Handoff5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
7−2−2 Visual Separation(d)If aircraft are on converging courses,
inform the other aircraft of the traffic and that visual
separation is being applied.
PHRASEOLOGY −
(ACID), TRAFFIC, (clock position and distance),
(direction) BOUND, (type of aircraft), HAS YOU IN
SIGHT AND WILL MAINTAIN VISUAL SEP ARATION.
(e)Advise the pilots if the targets appear
likely to merge.
NOTE−
Issue this advisory in conjunction with the instruction tomaintain visual separation, the advisory to the other
aircraft of the converging course, or thereafter if the
controller subsequently becomes aware that the targets are
merging.
EXAMPLE −
“Targets appear likely to merge.”
(f)Control of aircraft maintaining visual
separation may be transferred to an adjacent
position/sector/facility. Coordination proceduresmust be specified in an LOA or facility directive.
REFERENCE −
F AAO JO 7210.3, Para 4-3-1, Letters of Agreement
b.EN ROUTE. Visual separation may be used up
to but not including FL 180 when the following
conditions are met:
1.Direct communication is maintained with one
of the aircraft involved and there is an ability to
communicate with the other.
2.A pilot sees another aircraft and is instructed
to maintain visual separation from it as follows:
(a)Tell the pilot about the other aircraft
including position, direction, and type. If it is not
obvious, include the other aircraft’s intentions.
REFERENCE −
FAAO JO 7110.65, Para 2 −1−21, T raffic Advisories.
(b)Obtain acknowledgment from the pilot
that the other aircraft is in sight.
(c)Instruct the pilot to maintain visual
separation from that aircraft.
PHRASEOLOGY −
(ACID), TRAFFIC, (clock position and distance),
(direction) BOUND, (type of aircraft), (intentions and
other r elevant information). If r equired, (ACID), REPORT
TRAFFIC IN SIGHT or DO YOU HAVE IT IN SIGHT? If
the pilot reports traffic in sight, or the answer is in the
affirmative, (ACID), MAINTAIN VISUAL SEP ARATION(d)If the pilot reports the traffic in sight and
will maintain visual separation (the pilot must state
both), the controller may “approve” the operation
instead of restating the instructions.
PHRASEOLOGY −
(ACID), APPROVED.
NOTE−
Pilot-applied visual separation between aircraft is
achieved when the controller has instructed the pilot to
maintain visual separation and the pilot acknowledges
with their call sign or when the controller has approved
pilot-initiated visual separation.
(e)Advise the pilot if the targets appear likely
to converge.
(f)If aircraft are on converging courses,
inform the other aircraft of the traffic and that visual
separation is being applied.
PHRASEOLOGY −
(ACID) TRAFFIC, (clock position and distance),(direction) −BOUND, (type of aircraft), ON
CONVERGING COURSE, HAS YOU IN SIGHT AND
WILL MAINTAIN VISUAL SEP ARATION.
REFERENCE −
FAAO JO 7110.65, Para 7 −4−1, Visual Approach.
F AAO JO 71 10.65, Para 7 −4−2, V ectors for Visual Approach.
(g)Advise the pilots if either aircraft is a
heavy.
(h)Issue wake turbulence cautionary
advisories in ac cordance with para 2 −1−20.
c.Nonapproach control towers may be authorized
to provide visual separation between aircraft within
surface areas or designated areas when approved
separation is provided before and after the application
of visual separation. The nonapproach control tower
must apply the procedures contained in subparagraph
a1 or a2, when applying visual separation.
PHRASEOLOGY −
VISUAL SEP ARATION APPROVED BETWEEN (ACID)
AND (ACID),
and for departing aircraft,
(departing/succeeding aircraft) (ACID), RELEASED.
d.If the nonapproach control tower controller
states to the radar controller that they will provide
visual separation between arrivals, departures/ar-
rivals and/or successive departures, and states the call
signs of all aircraft involved, the radar controller can
approve the application of visual separation as
requested.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
7−2−3 Visual SeparationPHRASEOLOGY −
VISUAL SEP ARATION APPROVED and for
departing/succeeding aircraft, (ACIDs) RELEASED
NOTE−
A nonapproach control tower by accepting authorization
for visual separation becomes responsible for ensuring
that separation. Separation of IFR air craft before and after
application of visual separation is an IFR control function
that must be applied by the Appr oach/Departure/En Route
facility. Separation requirements also apply to VFR
aircraft when IFR, Class B, Class C or TRSA separation
services are required.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−1 1, Practice Approaches.
F AAO JO 7110.65, Para 5 −6−1, Application.
F AAO JO 7110.65, Para 7 −4−2, Vectors for Visual Approach.F AAO JO 7110.65, Para 7 −6−1, Application.
F AAO JO 7110.65, Para 7 −7−1, Application.
F AAO JO 7110.65, Para 7 −7−2, Issuance of EFC.
F AAO JO 7110.65, Para 7 −7−3, Separation.
F AAO JO 7110.65, Para 7 −7−4, Helicopter Traffic.
F AAO JO 7110.65, Para 7 −7−5, Altitude Assignments.
F AAO JO 7110.65, Para 7 −7−6, Approach Interval.
F AAO JO 7110.65, Para 7 −7−7, TRSA Departure Information.
F AAO JO 7110.65, Para 7 −8−2, Class C Services.
F AAO JO 7110.65, Para 7 −8−3, Separation.
F AAO JO 7110.65, Para 7 −8−4, Establishing Two −Wa y
Communications.
F AAO JO 7110.65, Para 7 −8−5, Altitude Assignments.
F AAO JO 7110.65, Para 7 −8−6, Exceptions.
F AAO JO 7110.65, Para 7 −9−1, Application.
F AAO JO 7110.65, Para 7 −9−3, Methods.
F AAO JO 7110.65, Para 7 −9−4, Separation.
F AAO JO 7110.65, Para 7 −9−6, Helicopter Traffic.
F AAO JO 7110.65, Para 7 −9−7, Altitude Assignments.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
7−3−1 VFR-On-TopSection 3. VFR-On-Top
7−3−1. VFR-ON-TOP
a.You may clear an aircraft to maintain
“VFR-on-top” if the pilot of an aircraft on an IFRflight plan requests the clearance.
PHRASEOLOGY −
MAINTAIN VFR-ON-TOP .
NOTE−
1.When an aircraft has been cleared to maintain
“VFR-on-top,” the pilot is responsible to fly at anappropriate VFR altitude, comply with VFR visibility and
distance fr om cloud criteria, and to be vigilant so as to see
and avoid other aircraft. The pilot is also responsible tocomply with instrument flight rules applicable to the flight
(e.g., adherence to ATC clearances).
2.Although IFR separation is not applied, controllers
must continue to provide traffic advisories and safety
alerts, and apply merging target procedures to aircraft
operating VFR-on-top.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−6, Safety Alert.
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
F AAO JO 7110.65, Para 5 −1−8, Merging Target Procedures.
F AAO JO 7110.65, Para 7 −1−1, Class A Airspace Restrictions.
AIM, Para 5 −5−13, VFR−on−top.
14 CFR Section 91.157, Special VFR Weather Minimums.14 CFR Section 91.159, VFR Cruising Altitude or Flight Level.
b.You may clear an aircraft to climb through
clouds, smoke, haze, or other meteorological
formations and then to maintain “VFR-on-top” if the
following conditions are met:
1.The pilot requests the clearance.
2.You inform the pilot of the reported height of
the tops of the meteorological formation, or
3.You inform the pilot that no top report is
available.
4.When necessary, you ensure separation from
all other traffic for which you have separationresponsibility by issuing an alternative clearance.
5.When an aircraft is climbing to and reports
reaching “VFR-on-top,” reclear the aircraft to
maintain “VFR-on-top.”PHRASEOLOGY −
CLIMB TO AND REPORT REACHING VFR-ON-TOP ,
and
TOPS REPORTED (altitude),
or
NO TOPS REPORTS.
IF NOT ON TOP AT (altitude), MAINTAIN (altitude), AND
ADVISE.
MAINTAIN VFR-ON-TOP .
c.Do not clear an aircraft to maintain “VFR-on-
top” between sunset and sunrise to separate holding
aircraft from each other or from en route aircraftunless restrictions are applied to ensure the
appropriate IFR vertical separation.
PHRASEOLOGY −
MAINTAIN VFR-ON-TOP AT OR ABOVE/BELOW/BETWEEN (altitudes).
EXAMPLE −
“Maintain VFR-on-top at or above one three thousandfive hundred.”
“Maintain VFR-on-top at or below one two thousand
five hundred.”
“Maintain VFR-on-top at or between six thousand and
one zero thousand.”
d.When, in your judgment, there is reason to
believe that flight in VFR conditions may becomeimpractical, issue an alternative clearance which will
ensure separation from all other aircraft for which
you have separation responsibility.
PHRASEOLOGY −
IF UNABLE, (alternative procedure), AND ADVISE.
REFERENCE −
F AAO JO 7110.65, Para 9 −3−3, VFR-on-top.
JO 7110.65W 12/10/15
7−3−2 VFR-On-Top7−3−2. ALTITUDE FOR DIRECTION OF
FLIGHT
Inform an aircraft maintaining “VFR-on-top” when
a report indicates the pilot is not complying with
14 CFR Section 91.159(a).
NOTE−
As required by 14 CFR Section 91.159(a), the appropriate
VFR altitudes for aircraft (not in a holding pattern of2 minutes or less, or turning) operating more than3,000 feet above the surface to and including 18,000 feetMSL:Magnetic courses 0 −179− odd cardinal altitudes plus
500 feet; e.g., 3,500, 5,500.
Magnetic courses 180 −359− even cardinal altitudes plus
500 feet; e.g., 4,500, 8,500.
PHRASEOLOGY −
VFR-ON-TOP CRUISING LEVELS FOR YOUR
DIRECTION OF FLIGHT ARE:
more than 3,000 feet above the surface to FL 180:ODD/EVEN ALTITUDES/FLIGHT LEVELS PLUS
FIVE HUNDRED FEET.
JO 7110.65W 12/10/15
7−4−1 ApproachesSection 4. Approaches
7−4−1. VISUAL APPROACH
A visual approach is an ATC authorization for an
aircraft on an IFR flight plan to proceed visually to the
airport of intended landing; it is not an instrument
approach procedure. Also, there is no missedapproach segment. An aircraft unable to complete a
visual approach must be handled as any go-around
and appropriate separation must be provided.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−20, Wake Turbulence Cautionary
Advisories.
F AAO JO 7110.65, Para 3 −10−2, Forwarding Approach Information
by Nonapproach Control Facilities.
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
F AAO JO 7110.65, Para 7 −4−4, Approaches to Multiple Runways.
7−4−2. VECTORS FOR VISUAL APPROACH
A vector for a visual approach may be initiated if the
reported ceiling at the airport of intended landing is
at least 500 feet above the MV A/MIA and the
visibility is 3 miles or greater. At airports without
weather reporting service there must be reasonable
assurance (e.g. area weather reports, PIREPs, etc.)that descent and flight to the airport can be made
visually, and the pilot must be informed that weather
information is not available.
PHRASEOLOGY −
(Ident) FLY HEADING OR TURN RIGHT/LEFTHEADING (degrees) VECTOR FOR VISUALAPPROACH TO (airport name).
(If appropriate)
WEATHER NOT AVAILABLE.
NOTE−
At airports where weather information is not available, a
pilot request for a visual approach indicates that descent
and flight to the airport can be made visually and clear ofclouds.
REFERENCE −
F AAO JO 7110.65, Para 5 −9−1, Vectors to Final Approach Course.
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
F AAO JO 7110.65, Para 7 −4−3, Clearance for Visual Approach.
F AAO JO 7110.65, Para 7 −4−4, Approaches to Multiple Runways.
F AAO JO 7110.65, Para 7 −6−7, Sequencing.
F AAO JO 7110.65, Para 7 −7−3, Separation.7−4−3. CLEARANCE FOR VISUAL
APPROACH
ARTCCs and approach controls may clear aircraft for
visual approaches using the following procedures:
NOTE−
Towers may exercise this authority when authorized by aLOA with the facility that provides the IFR service, or bya facility directive at collocated facilities.
a.Controllers may initiate, or pilots may request,
a visual approach even when an aircraft is being
vectored for an instrument approach and the pilot
subsequently reports:
1.The airport or the runway in sight at airports
with operating control towers.
2.The airport in sight at airports without a
control tower.
b.Resolve potential conflicts with all other
aircraft, advise an overtaking aircraft of the distance
to the preceding aircraft and speed difference, andensure that weather conditions at the airport are VFR
or that the pilot has been informed that weather is not
available for the destination airport. Upon pilot
request, advise the pilot of the frequency to receive
weather information where AWOS/ASOS is avail-able.
PHRASEOLOGY −
(Call sign) (control instructions as required) CLEAREDVISUAL APPROACH RUNWAY (number);
or
(Call sign) (control instructions as required) CLEARED
VISUAL APPROACH TO (airport name)
(and if appropriate)
WEATHER NOT AVAILABLE OR VERIFY THAT YOU
HAVE THE (airport) WEATHER.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
c.Clear an aircraft for a visual approach when:
1.The aircraft is number one in the approach
sequence, or
2.The aircraft is to follow a preceding aircraft
and the pilot reports the preceding aircraft in sight andis instructed to follow it, or
JO 7110.65W 12/10/15
7−4−2 ApproachesNOTE−
The pilot need not report the airport/runway in sight.
3.The pilot reports the airport or runway in sight
but not the preceding aircraft. Radar separation must
be maintained until visual separation is provided.
d.All aircraft following a heavy, or a small aircraft
following a B757, must be informed of the airplane
manufacturer and/or model.
EXAMPLE −
“Cessna Three Four Juliet, following a Boeing 757, 12o’clock, six miles.” or
“Cessna Three Four Juliet, following a Seven fifty seven,12 o’clock, six miles.”
REFERENCE −
FAAO JO 7110.65, Para.2 −4−21, Description of Air craft Types.
NOTE−
Visual separation is not authorized when the lead aircraftis a super.
REFERENCE −
F AAO JO 7110.65, Para 7-2-1.
e.Inform the tower of the aircraft’s position prior
to communications transfer at controlled airports.ARTS/STARS functions may be used provided a
facility directive or LOA specifies control and
communication transfer points.
f.In addition to the requirements of para 7 −4−2,
Vectors for Visual Approach, and subparas a, b, c, d,
and e, ensure that the location of the destinationairport is provided when the pilot is asked to report
the destination airport in sight.
g.In those instances where airports are located in
close proximity, also provide the location of the
airport that may cause the confusion.
EXAMPLE −
“Cessna Five Six November, Cleveland Burke Lakefront
Airport is at 12 o’clock, 5 miles. Cleveland HopkinsAirport is at 1 o’clock 12 miles. Report Cleveland Hopkins
in sight.”
REFERENCE −
F AAO JO 7110.65, Para 7 −4−4, Approaches to Multiple Runways.
7−4−4. APPROACHES TO MULTIPLE
RUNWAYS
a.All aircraft must be informed that approaches
are being conducted to parallel, intersecting, orconverging runways. This may be accomplished
through use of the ATIS.
b.When conducting visual approaches to multiple
runways ensure the following:
1.Do not permit the respective aircrafts’
primary radar targets to touch unless visualseparation is being applied.
2.When the aircraft flight paths intersect,
ensure approved separation is maintained until visual
separation is provided.
c.In addition to the requirements in para 7−2−1,
Visual Separation, para 7 −4−1, Visual Approach,
para 7−4−2, Vectors for Visual Approach, and
para 7−4−3, Clearance for Visual Approach, the
following conditions apply to visual approaches
being conducted simultaneously to parallel, intersect-
ing, and converging runways, as appropriate:
1.Parallel runways separated by less than 2,500
feet. Unless approved separation is provided by A TC,
an aircraft must report sighting a preceding aircraft
making an approach (instrument or visual) to the
adjacent parallel runway. When an aircraft reportsanother aircraft in sight on the adjacent final approach
course and visual separation is applied, controllers
must advise the succeeding aircraft to maintain visual
separation. However, do not permit a super or heavy
aircraft to overtake another aircraft. Do not permit a
B757 or other large aircraft to overtake a smallaircraft.
2.Parallel runways separated by at least
2,500 feet, but less than 4,300 feet.
(a)Approved separation is provided until the
aircraft are:
(1)Established on a heading or established
on a direct course to a fix or cleared on an RNA V/
instrument approach procedure which will intercept
the extended centerline of the runway at an angle not
greater than 30 degrees, and,
(2)Issued an approach clearance and one
pilot has acknowledged receipt of a visual approach
clearance, and,
(3)The other pilot has acknowledged
receipt of a visual or instrument approach clearance.
NOTE−
1.The intent of the 30 degree intercept angle is to reduce
the potential for overshoots of the extended centerline ofthe runway and pr eclude side-by-side operations with one3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
7−4−3 Approachesor both aircraft in a “belly-up” configuration during the
turn. Aircraft performance, speed, and the number ofdegrees of the turn are factors to be considered whenvectoring aircraft to parallel runways.
2.Variances between heading assigned to intercept the
extended centerline of the runway and aircraft groundtrack are expected due to the effect of wind and coursecorrections after completion of the turn and pilot
acknowledgment of a visual approach clearance.
3.Procedures using Radius-to-Fix legs that intercept final
may be used in lieu of 30-degree intercept provisions
contained in this paragraph.
REFERENCE −
F AA Publication, Pilot’ s Handbook of Aeronautical Knowledge,
Chapter 15 “Effect of Wind.”
(b)Visual approaches may be conducted to
one runway while visual or instrument approaches
are conducted simultaneously to other runways,
provided the conditions of subpara (a) are met.
(c)Provided aircraft flight paths do not
intersect, and when the provisions of subparas (a) and
(b) are met, it is not necessary to apply any other type
of separation with aircraft on the adjacent final
approach course.
3.Parallel runways separated by 4,300 feet or
more.
(a)When aircraft flight paths do not intersect,
visual approaches may be conducted simultaneously,
provided approved separation is maintained until one
of the aircraft has been issued and the pilot hasacknowledged receipt of the visual approach
clearance.
(b)Visual approaches may be conducted to
one runway while visual or instrument approaches
are conducted simultaneously to other runways,
provided the conditions of subpara (a) are met.
(c)Provided the aircraft flight paths do not
intersect, when the provisions of subparas (a) and (b)
are met, it is not necessary to apply any other type ofseparation with aircraft on the adjacent final approach
course.
(d)Each aircraft must either be assigned a
heading or established on a direct course to a fix or
cleared on an RNA V/instrument approach procedure
which will allow the aircraft to intercept the extended
centerline of the runway at an angle not greater than
30 degrees.NOTE−
1.The intent of the 30 degree intercept angle is to reduce
the potential for overshoots of the extended centerline ofthe runway and pr eclude side-by-side operations with one
or both aircraft in a “belly-up” configuration during the
turn. Aircraft performance, speed, and the number ofdegrees of the turn are factors to be considered whenvectoring aircraft to parallel runways.
2.Variances between heading assigned to intercept the
extended centerline of the runway and aircraft groundtrack are expected due to the effect of wind and coursecorrections after completion of the turn and pilot
acknowledgment of a visual approach clearance.
3.Procedures using Radius-to-Fix legs that intercept final
may be used in lieu of 30-degree intercept provisions
contained in this paragraph.
REFERENCE −
F AA Publication, Pilot’ s Handbook of Aeronautical Knowledge,
Chapter 15 “Effect of Wind.”
4.Intersecting and converging runways. Visual
approaches may be conducted simultaneously withvisual or instrument approaches to other runways,
provided:
(a)Approved separation is maintained until
the aircraft conducting the visual approach has been
issued, and the pilot has acknowledged receipt of, the
visual approach clearance.
(b)When aircraft flight paths intersect,
approved separation must be maintained until visual
separation is provided.
NOTE−
Although simultaneous approaches may be conducted tointersecting runways, staggered approaches may benecessary to meet the airport separation requirements
specified in Para 3 −10−4, Intersecting Runway/Intersect-
ing Flight Path Separation.
REFERENCE −
F AAO 7110.79, Charted Visual Flight Procedures.
F AAO JO 7110.65, Para 7 −4−5, Charted Visual Flight Procedures
(CVFP). USA/USN Not Applicable.
F AAO JO 7110.65, Para 7 −7−3, Separation.
7−4−5. CHARTED VISUAL FLIGHT
PROCEDURES (CVFP). USA/USN NOT
APPLICABLE
Clear an aircraft for a CVFP only when the following
conditions are met:
a.There is an operating control tower.
b.The published name of the CVFP and the
landing runway are specified in the approach
clearance, the reported ceiling at the airport of5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
7−4−4 Approachesintended landing is at least 500 feet above the
MV A/MIA, and the visibility is 3 miles or more,
unless higher minimums are published for the
particular CVFP.
c.When using parallel or intersecting/converging
runways, the criteria specified in Para 7 −4−4,
Approaches to Multiple Runways, are applied.
d.An aircraft not following another aircraft on the
approach reports sighting a charted visual landmark,
or reports sighting a preceding aircraft landing on the
same runway and has been instructed to follow thataircraft.
PHRASEOLOGY −
(Ident) CLEARED (name of CVFP) APPROACH.
7−4−6. CONTACT APPROACH
Clear an aircraft for a contact approach only if the
following conditions are met:
a.The pilot has requested it.
NOTE−
When executing a contact approach, the pilot is
responsible for maintaining the required flight visibility,cloud clearance, and terrain/obstruction clearance.Unless otherwise restricted, the pilot may find it necessary
to descend, climb, and/or fly a circuitous route to the
airport to maintain cloud clearance and/or terrain/
obstruction clearance. It is not in any way intended thatcontrollers will initiate or suggest a contact approach to a
pilot.
b.The reported ground visibility is at least
1 statute mile.c.A standard or special instrument approach
procedure has been published and is functioning for
the airport of intended landing.
d.Approved separation is applied between
aircraft so cleared and other IFR or SVFR aircraft.
When applying vertical separation, do not assign a
fixed altitude but clear the aircraft at or below an
altitude which is at least 1,000 feet below any IFR
traffic but not below the minimum safe altitudeprescribed in 14 CFR Section 91.119.
NOTE−
14 CFR Section 91.119 specifies the minimum safe altitudeto be flown:
(a) Anywhere.(b) Over congested areas.
(c) Other than congested areas. To provide for an
emergency landing in the event of power failure andwithout undue hazard to persons or property on thesurface.
(d) Helicopters. May be operated at less than the
minimums prescribed in paras (b) and (c) above if the
operation is conducted without hazard to persons orproperty on the surface.
e.An alternative clearance is issued when weather
conditions are such that a contact approach may be
impracticable.
PHRASEOLOGY −
CLEARED CONTACT APPROACH,
And if required,
AT OR BELOW (altitude) (routing).
IF NOT POSSIBLE, (alternative procedures), AND
ADVISE.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
7−5−1 Special VFR (SVFR)Section 5. Special VFR (SVFR)
7−5−1. AUTHORIZATION
a.SVFR operations in weather conditions less
than basic VFR minima are authorized:
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
1.At any location not prohibited by 14 CFR
Part 91, Appendix D or when an exemption to
14 CFR Part 91 has been granted and an associated
LOA established. 14 CFR Part 91 does not prohibitSVFR helicopter operations.
2.Only within the lateral boundaries of Class B,
Class C, Class D, or Class E surface areas, below
10,000 feet MSL.
3.Only when requested by the pilot.
4.On the basis of weather conditions reported at
the airport of intended landing/departure.
REFERENCE −
F AAO JO 7110.65, Para 7 −5−6, Climb to VFR.
F AAO JO 7110.65, Para 7 −5−7, Ground Visibility Below One Mile.
5.When weather conditions are not reported at
the airport of intended landing/departure and the pilotadvises that VFR cannot be maintained and requests
SVFR.
PHRASEOLOGY −
CLEARED TO ENTER/OUT OF/THROUGH, (name)SURF ACE AREA
and if required,
(direction) OF (name) AIRPORT (specified routing),
and
MAINT AIN SPECIAL V −F−R CONDITIONS,
and if required,
AT OR BELOW (altitude below 10,000 feet MSL)
or as applicable under an exemption from 14 CFR
Part 91,
CLEARED FOR (coded arrival or departure procedure)
ARRIVAL/DEP ARTURE, (additional instructions as
required).
REFERENCE −
F AAO JO 7110.65, Para 2 −4−22, Airspace Classes.b.SVFR operations may be authorized for aircraft
operating in or transiting a Class B, Class C, Class D,
or Class E surface area when the primary airport is
reporting VFR but the pilot advises that basic VFR
cannot be maintained.
NOTE−
The basic requirements for issuance of a SVFR clearancein subpara a apply with the obvious exception that weather
conditions at the controlling airport are not required to be
less than basic VFR minima.
7−5−2. PRIORITY
a.SVFR flights may be approved only if arriving
and departing IFR aircraft are not delayed.
EXAMPLE −
1.A SVFR aircraft has been cleared to enter a Class B,
Class C, Class D, or Class E surface area and subsequently
an IFR aircraft is ready to depart or is in position to begin
an approach. Less overall delay might accrue to the IFRaircraft if the SVFR aircraft is allowed to proceed to theairport and land, rather than leave, a Class B, Class C,
Class D, or Class E surface area or be repositioned to
provide IFR priority.
2.A SVFR aircraft is number one for takeoff and located
in such a position that the number two aircraft, an IFRflight, cannot taxi past to gain access to the runway. Lessoverall delay might accrue to the IFR aircraft by r eleasing
the SVFR departure rather than by having the air craft taxi
down the runway to a turnoff point so the IFR air craft could
be released first.
NOTE−
The priority afforded IFR aircraft over SVFR aircraft is notintended to be so rigidly applied that inefficient use ofairspace results. The controller has the prerogative of
permitting completion of a SVFR operation already in
progress when an IFR aircraft becomes a factor if betteroverall efficiency will result.
b.Inform an aircraft of the anticipated delay when
a SVFR clearance cannot be granted because of IFR
traffic. Do not issue an EFC or expected departure
time.
PHRASEOLOGY −
EXPECT (number) MINUTES DELAY, (additionalinstructions as necessary).
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 5 −6−1, Application.
JO 7110.65W 12/10/15
7−5−2 Special VFR (SVFR)7−5−3. SEPARATION
a.Apply non-radar or visual separation between:
1.SVFR fixed wing aircraft.
2.SVFR fixed-wing aircraft and SVFR
Helicopters.
3.SVFR fixed-wing aircraft and IFR aircraft.
NOTE−
1.Vertical separation is authorized between SVFR fixed
wing aircraft and IFR aircraft as prescribed in F AAJO 7110.65, Paragraph 7-5-4 Altitude Assignments
2.Due to the r equir ements for SVFR fixed-wing air craft to
maintain 1-mile flight visibility and to remain clear of
clouds, radar separation is not authorized during SVFRfixed-wing operations. Radar vectors are authorized, asprescribed in para 5-6-1, Application, subparagraph f, to
expedite the entrance, exit, and transition of SVFR
fixed-wing aircraft through the appropriate surface area.
REFERENCE −
F AAO JO 7110.65, Chapter 6, Nonradar
F AAO JO 7110.65, para 7-2-1 Visual SeparationF AAO JO 7110.65, para 7-5-4 Altitude Assignment
b.Apply non-radar, visual, or IFR radar
separation between:
1.SVFR Helicopters.
2.SVFR Helicopters and IFR aircraft.
NOTE−
1.Vertical separation is authorized between SVFR
helicopters and IFR aircraft as prescribed in F AA
JO 7110.65, Paragraph 7-5-4 Altitude Assignments
2.Radar separation as prescribed in Chapter 5 may be
applied pr ovided that the facility conducting the operation
is authorized to provide radar separation services in
accordance with F AAO 7210.3, paragraph 10-5-3,
Functional Use of Certified Tower Radar Displays(CTRD), subparagraph b5, and subparagraph d. Facilities
that are not delegated airspace or separation responsibil-
ity must use CTRDs in accordance with F AAO 7110.65,paragraph 3-1-9, Use of Tower Radar Displays,subparagraph b.
c.Alternate SVFR helicopter separation minima
may be established when warranted by the volume
and/or complexity of local helicopter operations.
Alternate SVFR helicopter separation minima mustbe established with an LOA with the helicopter
operator which must specify, as a minimum, that
SVFR helicopters are to maintain visual reference tothe surface and adhere to the following aircraft
separation minima:
1.Between a SVFR helicopter and an arriving
or departing IFR aircraft:
(a)
1/2 mile. If the IFR aircraft is less than
1 mile from the landing airport.
(b)1 mile. If the IFR aircraft is 1 mile or
more from the airport.
2.1 mile between SVFR helicopters. This
separation may be reduced to 200 feet if:
(a)Both helicopters are departing simultan-
eously on courses that diverge by at least 30 degreesand:
(1)The tower can determine this separation
by reference to surface markings; or
(2)One of the departing helicopters is
instructed to remain at least 200 feet from the other.
NOTE−
1.Vertical separation is authorized between SVFR
helicopters and IFR aircraft as prescribed in F AAO7110.65, 7-5-4, Altitude Assignments.
2.Radar separation as prescribed in Chapter 5 may be
applied pr ovided that the facility conducting the operation
is authorized to provide radar separation services in
accordance with F AAO 7210.3, paragraph 10-5-3,Functional Use of Certified Tower Radar Displays
(CTRD), subparagraph b5, and subparagraph d. Facilities
that are not delegated airspace or separation responsibil-
ity must use CTRDs in accordance with F AAO 7110.65,
paragraph 3-1-9, Use of Tower Radar Displays,
subparagraph b.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, para 7-2-1, Visual SeparationF AAO JO 7110.65, para 7-5-4 Altitude Separation
F AAO JO 7110.65, Chapter 6, Nonradar
F AAO JO 7210.3, para 10-5-3, Functional Use of Certified TowerRadar Displays
7−5−4. ALTITUDE ASSIGNMENT
Do not assign a fixed altitude when applying vertical
separation, but clear the SVFR aircraft at or below an
altitude which is at least 500 feet below anyconflicting IFR traffic but not below the MSA
prescribed in 14 CFR Section 91.119.
PHRASEOLOGY −
MAINTAIN SPECIAL V −F−R CONDITIONS AT OR
BELOW (altitude).
NOTE−
1.SVFR aircraft are not assigned fixed altitudes to
JO 7110.65W 12/10/15
7−5−3 Special VFR (SVFR)maintain because of the clearance from clouds
requirement.
2.The MSAs are:
(a) Over congested areas, an altitude at least 1,000 feet
above the highest obstacle, and
(b) Over other than congested areas, an altitude at least
500 feet above the surface.
(c) Helicopters may be operated at less than the
minimum altitudes prescribed in (a) and (b) above.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 5 −6−1, Application.
14 CFR Section 91.119, Minimum Safe Altitudes: General.
7−5−5. LOCAL OPERATIONS
a.Authorize local SVFR operations for a specified
period (series of landings and takeoffs, etc.) uponrequest if the aircraft can be recalled when traffic or
weather conditions require. Where warranted, LOAs
may be consummated.
PHRASEOLOGY −
LOCAL SPECIAL V −F−R OPERATIONS IN THE
IMMEDIATE VICINITY OF (name) AIRPORT AREAUTHORIZED UNTIL (time). MAINTAIN SPECIALV−F−R CONDITIONS.
REFERENCE −
FAAO JO 7210.3, Para 4 −3−2, Appr opriate Subjects.
b.Control facilities may also authorize an FSS to
transmit SVFR clearances so that only one aircraft at
a time operates in the Class B, Class C, Class D, or
Class E surface areas unless pilots agree that theywill maintain visual separation with other aircraft
operating in the Class B, Class C, Class D, or Class E
surface areas. Such authorization concerning visualseparation by pilots must be contained in a LOA
between the control facility and the FSS.
REFERENCE −
FAAO JO 7210.3, Para 4 −3−3, Developing LOA.
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
7−5−6. CLIMB TO VFR
Authorize an aircraft to climb to VFR upon request if
the only weather limitation is restricted visibility.
PHRASEOLOGY −
CLIMB TO V −F−R WITHIN (name) SURF ACE
AREA/WITHIN (a specified distance) MILES FROM
(airport name) AIRPORT, MAINTAIN SPECIAL V −F−R
CONDITIONS UNTIL REACHING V −F−R.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 2 −4−22, Airspace Classes.
F AAO JO 7110.65, Para 7 −5−1, Authorization.7−5−7. GROUND VISIBILITY BELOW ONE
MILE
14 CFR Part 91 does not prohibit helicopter SVFR
flight when the visibility is less than 1 mile. Treat
requests for SVFR fixed wing operations as follows
when the ground visibility is officially reported at anairport as less than 1 mile:
a.Inform departing aircraft that ground visibility
is less than 1 mile and that a clearance cannot be
issued.
b.Inform arriving aircraft, operating outside of a
Class B, Class C, Class D, or Class E surface area, that
ground visibility is less than 1 mile and that, unless an
emergency exists, a clearance cannot be issued.
c.Inform arriving aircraft, operating VFR/SVFR
within a Class B, Class C, Class D, or Class E surface
area, that ground visibility is less than 1 mile andrequest the pilot to advise intentions.
PHRASEOLOGY −
(Name of airport) VISIBILITY LESS THAN ONE MILE.
ADVISE INTENTIONS.
NOTE−
Clear an aircraft to land at an airport with an operatingcontrol tower, traffic permitting, if the pilot reports theairport in sight. The pilot is responsible to continue to theairport or exit the surface area. 14 CFR Section 91.157
prohibits VFR aircraft (other than helicopters) from
landing at any airport within a surface area when groundvisibility is less than 1 mile. A pilot could inadvertentlyencounter conditions that are below SVFR minimums after
entering a surface area due to rapidly changing weather.
The pilot is best suited to determine the action to be taken
since pilots operating under SVFR between sunrise andsunset are not required to be instrument rated, and thepossibility exists that flight visibility may not be the sameas ground visibility. 14 CFR Section 91.3 authorizes a pilot
encountering an inflight emergency requiring immediate
action to deviate from any rule of 14 CFR Part 91 to theextent required to meet that emer gency. Flight into adverse
weather conditions may require the pilot to execute theemergency authority granted in 14 CFR Section 91.3 and
continue inbound to land.
d.Authorize scheduled air carrier aircraft in the
U.S. to conduct operations if ground visibility is notless than
1/2 statute mile.
NOTE−
14 CFR Part 121 permits landing or takeoff by domesticscheduled air carriers where a local surface restriction to
visibility is not less than 1/2 statute mile, pr ovided all turns
after takeoff or before landing and all flights beyond1 statute mile from the airport boundary can be
JO 7110.65W 12/10/15
7−5−4 Special VFR (SVFR)accomplished above or outside the area so restricted. The
pilot is solely responsible for determining if the nature ofthe visibility restriction will permit compliance with theprovisions of 14 CFR Part 121.
e.Clear an aircraft to fly through the Class B,
Class C, Class D, or Class E surface area if the
aircraft reports flight visibility is at least 1 statute
mile.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 7 −5−1, Authorization.
7−5−8. FLIGHT VISIBILITY BELOW ONE
MILE
Treat requests for SVFR fixed-wing operations as
follows when weather conditions are not reported atan airport and the pilot advises the flight visibility is
less than 1 mile:
NOTE−
14 CFR Part 91 prescribes the visibility for basic VFR and
SVFR operations as the official reported ground visibility
at airports where provided and landing or takeoff “flight
visibility” where there is no official reported groundvisibility.
a.Inform departing aircraft that a clearance cannot
be issued.
b.Inform arriving aircraft operating outside of a
Class B, Class C, Class D or Class E surface area thata clearance cannot be issued unless an emergency
exists.
c.Request the intentions of an arriving aircraft
operating within a Class B, Class C, Class D, orClass E surface area.
NOTE−
Clear an aircraft to land at an airport with an operatingcontrol tower, traffic permitting, if the pilot reports the
airport in sight. The pilot is responsible to continue to the
airport or exit the surface area. 14 CFR Section 91.157prohibits VFR aircraft (other than helicopters) fromlanding at any airport within a surface area when flightvisibility is less than 1 mile. A pilot could inadvertently
encounter conditions that are below SVFR minimums after
entering a surface area due to rapidly changing weather.The pilot is best suited to determine the action to be takensince pilots operating under SVFR between sunrise andsunset are not required to be instrument rated, and the
possibility exists that flight visibility may not be the same
as ground visibility. 14 CFR Section 91.3 authorizes a pilot
encountering an inflight emergency requiring immediateaction to deviate from any rule of 14 CFR Part 91 to theextent required to meet that emer gency. Flight into adverse
weather conditions may require the pilot to execute the
emergency authority granted in 14 CFR Section 91.3 andcontinue inbound to land.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
JO 7110.65W 12/10/15
7−6−1 Basic Radar Service to VFR Aircraft − TerminalSection 6. Basic Radar Service
to VFR Aircraft − Terminal
7−6−1. APPLICATION
a.Basic radar services for VFR aircraft must
include:
1.Safety alerts.
2.Traffic advisories.
3.Limited radar vectoring when requested by
the pilot.
4.Sequencing at locations where procedures
have been established for this purpose and/or whencovered by a LOA.
b.Apply the procedures contained in para 7 −1−3,
Approach Control Service for VFR Arriving Aircraft,
when arriving VFR aircraft are handled by approachcontrol and provide vectoring service in accordance
with Chapter 5, Radar , Section 7, Speed Adjustment,
in addition to the radar services prescribed inpara 5−6−1, Application, and para 5 −6−2, Methods.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−16, Surface Areas.
F AAO JO 7110.65, Para 7 −6−1, Application.
F AAO JO 7210.3, Chapter 11, Section 1, Terminal VFR RadarServices.
AIM, Para 4 −1−18, Terminal Radar Services for VFR Aircraft.
7−6−2. SERVICE AVAILABILITY
a.Inform aircraft on initial contact whenever this
service cannot be provided because of radar outageand apply para 7 −1−3, Approach Control Service for
VFR Arriving Aircraft.
b.Provide the service, to the extent possible using
an available frequency, if an aircraft desires theservice but cannot communicate on the appropriate
frequencies. Aircraft which do not desire radar
service may be fitted into the landing sequence by the
tower. Coordination of these aircraft must be
accomplished with the approach control unless a
facility directive/LOA prescribes otherwise. Nonpar-
ticipating aircraft must, to the extent possible, be
given the same landing sequence they would have
received had they been sequenced by radar vectors.
c.Radar sequencing to the primary airport, when
local procedures have been developed, must be
provided unless the pilot states that the service is notrequested. Arriving aircraft are assumed to want
radar service unless the pilot states “Negative radar
service,” or makes a similar comment.
7−6−3. INITIAL CONTACT
An aircraft sighted by the local controller at the time
of first radio contact may be positioned in the landing
sequence after coordination with approach control.
7−6−4. IDENTIFICATION
Identify the aircraft before taking action to position it
in the approach sequence.
7−6−5. HOLDING
Hold VFR aircraft over the initial reporting fix or a fix
near the airport when holding is required to establish
an approach sequence.
REFERENCE −
F AAO JO 7110.65, Para 7 −1−4, Visual Holding of VFR Aircraft.
7−6−6. APPROACH SEQUENCE
Do not assign landing sequence numbers, when
establishing aircraft in the approach sequence, unless
this responsibility has been delegated in a LOA or
facility directive.
NOTE−
The landing sequence is ordinarily established by thetower.
7−6−7. SEQUENCING
a.Establish radar contact before instructing a VFR
aircraft to enter the traffic pattern at a specified point
or vectoring the aircraft to a position in the approachsequence. Inform the pilot of the aircraft to follow
when the integrity of the approach sequence is
dependent on following a preceding aircraft. Ensure
visual contact is established with the aircraft to follow
and provide instruction to follow that aircraft.
PHRASEOLOGY −
FOLLOW (description) (position, if necessary).
b.Direct a VFR aircraft to a point near the airport
to hold when a position is not available in the
approach sequence for the runway in use. The aircraft
JO 7110.65W 12/10/15
7−6−2 Basic Radar Service to VFR Aircraft − Terminalmay be vectored to another runway after coordination
with the tower.
c.Apply the following procedures to a VFR
aircraft being radar sequenced:
1.The provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g.
2.When parallel runways are less than 2,500
feet apart, do not permit a super or heavy aircraft to
overtake any aircraft, nor a B757 or other large
aircraft to overtake a small aircraft established on
final within the facility’s area of responsibility.
7−6−8. CONTROL TRANSFER
a.Inform the tower of the aircraft’s position and
then instruct the pilot to contact the tower.
b.The aircraft may be instructed to contact the
tower prior to the tower being advised of the aircraft’s
position provided:
1.The tower advises the aircraft is in sight, and
2.Space is available in the landing sequence.
c.Instruct the pilot to contact the tower at the
appropriate point when the approach controlARTS/STARS track data is being displayed on the
tower’s BRITE/DBRITE/TDW display, the aircraft
is tagged by ARTS/STARS, and a facility directivespecifies change of communications and control
jurisdiction points.
NOTE−
The point at which an aircraft is instructed to contact thetower is determined by prior coordination between the
tower and approach control and will vary, depending on
the runway in use, weather, etc. The transfer ofcommunications or dinarily occurs at least 5 miles from the
runway. The point for the transfer of communicationsshould be a sufficient distance from the airport to permit
the tower to properly sequence the aircraft, but not at a
distance that could derogate the provision of radar trafficinformation service.7−6−9. ABANDONED APPROACH
Instruct the aircraft to change to approach control for
sequencing when an aircraft, under tower control,abandons the approach and coordination with
approach control reveals no immediate space in the
approach sequence.
7−6−10. VFR DEPARTURE INFORMATION
Inform departing VFR aircraft who request radar
traffic advisories when to contact departure control
and the frequency to use. Provide traffic advisories in
accordance with para 2 −1−21, Traffic Advisories,
after the departure is radar identified.
NOTE−
Departing aircraft desiring traffic information areexpected to r equest the service and to state their proposed
direction of flight upon initial contact with ground control.
7−6−11. TERMINATION OF SERVICE
Basic radar services should be provided to the extent
possible, workload permitting. Terminate radar
service to aircraft landing at airports other than those
where sequencing service is provided at a sufficientdistance from the airport to permit the pilot to change
to the appropriate frequency for traffic and airport
information.
PHRASEOLOGY −
RADAR SERVICE TERMINATED, SQUAWK ONE TWO
ZERO ZERO,
or
SQUAWK VFR,
thenCHANGE TO ADVISORY FREQUENCY APPROVED,
or
CONTACT (frequency identification),
or
FREQUENCY CHANGE APPROVED.
JO 7110.65W 12/10/15
7−6−3 Basic Radar Service to VFR Aircraft − Terminal7−6−12. SERVICE PROVIDED WHEN
TOWER IS INOPERATIVE
a.Provide the following services during hours
when the tower is not in operation:
1.Wind direction and velocity.
NOTE−
Issue information provided from the FSS or WSO.Otherwise, inform the pilot that wind information is notavailable.2.Traffic information.
3.Inform aircraft when radar service is
terminated.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−13, Radar Service Termination.
b.Do not assign landing sequence.
JO 7110.65W 12/10/15
7−7−1 Terminal Radar Service Area (TRSA) − TerminalSection 7. Terminal Radar Service
Area (TRSA) − Terminal
7−7−1. APPLICATION
Apply TRSA procedures within the designated
TRSA in addition to the basic services described in
Chapter 7, Visual, Section 6, Basic Radar Service to
VFR Aircraft − Terminal.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−7−2. ISSUANCE OF EFC
Inform the pilot when to expect further clearance
when VFR aircraft are held either inside or outside the
TRSA.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−7−3. SEPARATION
Separate VFR aircraft from VFR/IFR aircraft by any
one of the following:
a.Visual separation, as specified in para 7 −2−1,
Visual Separation, para 7 −4−2, Vectors for Visual
Approach, and para 7 −6−7, Sequencing.
NOTE−
Issue wake turbulence cautionary advisories in accor-
dance with para 2 −1−20, Wake Turbulence Cautionary
Advisories.
b.500 feet vertical separation.
c.Target resolution, except when ISR is being
displayed.
NOTE−
Apply the provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g, when wake turbulence separation
is required.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−7−4. HELICOPTER TRAFFIC
Helicopters need not be separated from other
helicopters. Traffic information must be exchanged,
as necessary.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.7−7−5. ALTITUDE ASSIGNMENTS
a.Altitude information contained in a clearance,
instruction, or advisory to VFR aircraft must meet
MV A, MSA, or minimum IFR altitude criteria.
REFERENCE −
F AAO JO 7110.65, Para 4 −5−2, Flight Direction.
F AAO JO 7110.65, Para 4 −5−3, Exceptions.
F AAO JO 7110.65, Para 4 −5−6, Minimum En Route Altitudes.
b.If required, issue altitude assignments, consis-
tent with the provisions of 14 CFR Section 91.119.
NOTE−
The MSAs are:
1.Over congested areas, an altitude at least 1,000 feet
above the highest obstacle; and
2.Over other than congested areas, an altitude at least
500 feet above the surface.
c.When necessary to assign an altitude for
separation purposes to VFR aircraft contrary to14 CFR Section 91.159, advise the aircraft to resume
altitudes appropriate for the direction of flight when
the altitude assignment is no longer needed forseparation or when leaving the TRSA.
PHRASEOLOGY −
RESUME APPROPRIATE VFR ALTITUDES.
REFERENCE −
F AAO JO 7110.65, Para 4 −8−1 1, Practice Approaches.
F AAO JO 7110.65, Para 5 −6−1, Application.
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−7−6. APPROACH INTERVAL
The tower must specify the approach interval.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−7−7. TRSA DEPARTURE INFORMATION
a.At controlled airports within the TRSA, inform
a departing aircraft proposing to operate within theTRSA when to contact departure control and the
frequency to use. If the aircraft is properly equipped,
ground control or clearance delivery must issue theappropriate beacon code.
JO 7110.65W 12/10/15
7−7−2 Terminal Radar Service Area (TRSA) − TerminalNOTE−
Departing aircraft are assumed to want TRSA serviceunless the pilot states, “negative TRSA service,” or makes
a similar comment. Pilots are expected to inform the
controller of intended destination and/or route of flight and
altitude.
b.Provide separation until the aircraft leaves the
TRSA.
c.Inform VFR participating aircraft when leaving
the TRSA.
PHRASEOLOGY −
LEAVING THE (name) TRSA,
and as appropriate,
RESUME OWN NAVIGATION, REMAIN THIS
FREQUENCY FOR TRAFFIC ADVISORIES, RADARSERVICE TERMINATED, SQUAWK ONE TWO ZEROZERO.d.Aircraft departing satellite controlled airports
that will penetrate the TRSA should be provided the
same service as those aircraft departing the primary
airport. Procedures for handling this situation must be
covered in a letter of agreement or facility directives,
as appropriate.
e.Procedures for handling aircraft departing
uncontrolled satellite airports must be advertised in a
facility bulletin and service provided accordingly.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
JO 7110.65W 12/10/15
7−8−1 Class C Service − TerminalSection 8. Class C Service − Terminal
7−8−1. APPLICATION
Apply Class C service procedures within the
designated Class C airspace and the associated outer
area. Class C services are designed to keep ATC
informed of all aircraft within Class C airspace, not
to exclude operations. Two-way radio communica-tions and operational transponder are normally
required for operations within Class C airspace, but
operations without radio communications ortransponder can be conducted by LOA, facility
directive, or special arrangement with Class C
airspace controlling facility.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
14 CFR Section 91.215, ATC Transponder and Altitude ReportingEquipment and Use.
7−8−2. CLASS C SERVICES
a.Class C services include the following:
1.Sequencing of all aircraft to the primary
airport.
2.Standard IFR services to IFR aircraft.
3.Separation, traffic advisories, and safety
alerts between IFR and VFR aircraft.
4.Mandatory traffic advisories and safety alerts
between VFR aircraft.
b.Provide Class C services to all aircraft operating
within Class C airspace.
c.Provide Class C services to all participating
aircraft in the outer area.
d.Aircraft should not normally be held. However,
if holding is necessary, inform the pilot of theexpected length of delay.
e.When a radar outage occurs, advise aircraft that
Class C services are not available and, if appropriate,
when to contact the tower.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.7−8−3. SEPARATION
Separate VFR aircraft from IFR aircraft by any one of
the following:
a.Visual separation as specified in para 7 −2−1,
Visual Separation, para 7 −4−2, Vectors for Visual
Approach, and para 7 −6−7, Sequencing.
NOTE−
Issue wake turbulence cautionary advisories in accord-ance with para 2 −1−20, Wake Turbulence Cautionary
Advisories.
b.500 feet vertical separation;
c.Target resolution, except when ISR is being
displayed.
NOTE−
Apply the provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g, when wake turbulence separation
is required.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−8−4. ESTABLISHING TWO-WAY
COMMUNICATIONS
Class C service requires pilots to establish two-way
radio communications before entering Class C
airspace. If the controller responds to a radio callwith, “(a/c call sign) standby ,” radio communications
have been established and the pilot can enter Class C
airspace. If workload or traffic conditions preventimmediate provision of Class C services, inform the
pilot to remain outside Class C airspace until
conditions permit the services to be provided.
PHRASEOLOGY −
(A/c call sign) REMAIN OUTSIDE CHARLIE AIRSP ACE
AND STANDBY.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
JO 7110.65W 12/10/15
7−8−2 Class C Service − Terminal7−8−5. ALTITUDE ASSIGNMENTS
a.When necessary to assign altitudes to VFR
aircraft, assign altitudes that meet the MV A, MSA, or
minimum IFR altitude criteria.
b.Aircraft assigned al titudes whi ch are contrary to
14 CFR Section 91.159 must be advised to resume
altitudes appropriate for the direction of flight when
the altitude is no longer needed for separation, when
leaving the outer area, or when terminating Class Cservice.
PHRASEOLOGY −
RESUME APPROPRIATE VFR ALTITUDES.
REFERENCE −
F AAO JO 7110.65, Para 7 −2−1, Visual Separation.
7−8−6. EXCEPTIONS
a.VFR helicopters need not be separated from
IFR helicopters. Traf fic information and safety alerts
must be issued as appropriate.
b.Hot air balloons need not be separated from IFR
aircraft. Traf fic information and safety alerts must be
issued as appropriate.7−8−7. ADJACENT AIRPORT OPERATIONS
a.Aircraft that will penetrate Class C airspace
after departing controlled airports within or adjacentto Class C airspace must be provided the same
services as those aircraft departing the primary
airport. Procedures for handling this situation must be
covered in a LOA or a facility directive, as
appropriate.
b.Aircraft departing uncontrolled airports within
Class C airspace must be handled using proceduresadvertised in a Letter to Airmen.
7−8−8. TERMINATION OF SERVICE
Unless aircraft are landing at secondary airports or
have requested termination of service while in the
outer area, provide services until the aircraft departsthe associated outer area. Terminate Class C service
to aircraft landing at other than the primary airport at
a sufficient distance from the airport to allow the pilot
to change to the appropriate frequency for traffic and
airport information.
PHRASEOLOGY −
CHANGE TO ADVISORY FREQUENCY APPROVED,
or
CONTACT (facility identification).
JO 7110.65W 12/10/15
7−9−1 Class B Service Area − TerminalSection 9. Class B Service Area − Terminal
7−9−1. APPLICATION
Apply Class B services and procedures within the
designated Class B airspace.
a.No person may operate an aircraft within
Class B airspace unless:
1.The aircraft has an operable two-way radio
capable of communications with ATC on appropriate
frequencies for that Class B airspace.
2.The aircraft is equipped with the applicable
operating transponder and automatic altitude report-
ing equipment specified in para (a) of 14 CFRSection 91.215, except as provided in para (d) of that
section.
7−9−2. VFR AIRCRAFT IN CLASS B
AIRSPACE
a.VFR aircraft must obtain an ATC clearance to
operate in Class B airspace.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−18, Operational Requests.
F AAO JO 7110.65, Para 2 −4−22, Airspace Classes.
PHRASEOLOGY −
CLEARED THROUGH/TO ENTER/OUT OF BRAVOAIRSP ACE,
and as appropriate,
VIA (route). MAINTAIN (altitude) WHILE IN BRAVO
AIRSP ACE.
or
CLEARED AS REQUESTED.
(Additional instructions, as necessary.)
REMAIN OUTSIDE BRAVO AIRSP ACE. (When
necessary, reason and/or additional instructions.)
NOTE−
1.Assignment of radar headings, routes, or altitudes is
based on the pr ovision that a pilot operating in accor dance
with VFR is expected to advise ATC if compliance willcause violation of any part of the CFR.
2.Separation and sequencing for VFR aircraft is
dependent upon radar. Efforts should be made to segr egateVFR traffic from IFR traffic flows when a radar outage
occurs.
b.Approve/deny requests from VFR aircraft to
operate in Class B airspace based on workload,
operational limitations and traffic conditions.
c.Inform the pilot when to expect further
clearance when VFR aircraft are held either inside or
outside Class B airspace.
d.Inform VFR aircraft when leaving Class B
airspace.
PHRASEOLOGY −
LEAVING (name) BRAVO AIRSP ACE,
and as appropriate,
RESUME OWN NAVIGATION, REMAIN THIS
FREQUENCY FOR TRAFFIC ADVISORIES, RADARSERVICE TERMINATED, SQUAWK ONE TWO ZERO
ZERO.
7−9−3. METHODS
a.To the extent practical, clear large turbine
engine-powered airplanes to/from the primary airport
using altitudes and routes that avoid VFR corridors
and airspace below the Class B airspace floor where
VFR aircraft are operating.
NOTE−
Pilots operating in accordance with VFR are expected toadvise ATC if compliance with assigned altitudes,headings, or routes will cause violation of any part of the
CFR.
b.Vector aircraft to remain in Class B airspace
after entry. Inform the aircraft when leaving and
reentering Class B airspace if it becomes necessary to
extend the flight path outside Class B airspace for
spacing.
NOTE−
14 CFR Section 91.131 states that “Unless otherwise
authorized by A TC, each person operating a large turbine
engine-powered airplane to or from a primary airport forwhich a Class B airspace area is designated must operate
at or above the designated floors of the Class B airspace
area while within the lateral limits of that area.” Such
authorization should be the exception rather than the rule.
REFERENCE −
F AAO JO 7110.65, Para 5 −1−10, Deviation Advisories.
JO 7110.65W 12/10/15
7−9−2 Class B Service Area − Terminalc.Aircraft departing controlled airports within
Class B airspace will be provided the same services
as those aircraft departing the primary airport.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−18, Operational Requests.
7−9−4. SEPARATION
a.Standard IFR services to IFR aircraft.
b.VFR aircraft must be separated from VFR/IFR
aircraft/ helicopter/rotorcraft that weigh more than
19,000 pounds and turbojets by no less than:
1.1 1/2 miles separation, or
NOTE−
When ISR is being displayed, discontinue 1 1/2−NM
separation.
2.500 feet vertical separation, or
NOTE−
Apply the provisions of paragraph 5 −5−4, Minima, when
wake turbulence separation is required.
3.Visual separation, as specified in
paragraph 7 −2−1, Visual Separation,
paragraph 7 −4−2, Vectors for Visual Approach, and
paragraph 7 −6−7, Sequencing.
NOTE−
Issue wake turbulence cautionary advisories in accor-
dance with paragraph 2 −1−20, Wake Turbulence
Cautionary Advisories.
c.For the application of Class Bravo airspace
separation requirements, the V-22 Osprey must be
treated as a helicopter/rotorcraft.
d.VFR aircraft must be separated from all
VFR/IFR aircraft which weigh 19,000 pounds or less
by a minimum of:
1.Target resolution, except when ISR is being
displayed, or
2.500 feet vertical separation, or
NOTE−
1.Apply the provisions of para 5 −5−4, Minima, when
wake turbulence separation is required.
2.Aircraft weighing 19,000 pounds or less include all
aircraft in SRS Categories I and II plus G73, STAR, S601,
BE30, SW3, B190 and C212.
3.Visual separation, as specified in para 7 −2−1,
Visual Separation, para 7 −4−2, Vectors for Visual
Approach, and para 7 −6−7, Sequencing.NOTE−
Issue wake turbulence cautionary advisories in accor-dance with para 2 −1−20, Wake Turbulence Cautionary
Advisories.
REFERENCE −
P/CG Term − Lateral Separation.
P/CG Term − Radar Separation.
P/CG Term − Target Resolution.
P/CG Term − Visual Separation.
7−9−5. TRAFFIC ADVISORIES
a.Provide mandatory traffic advisories and safety
alerts, between all aircraft.
b.Apply mer ging target procedures in accordance
with para 5 −1−8, Merging Target Procedures.
7−9−6. HELICOPTER TRAFFIC
VFR helicopters need not be separated from VFR or
IFR helicopters. Traffic advisories and safety alertsmust be issued as appropriate.
7−9−7. ALTITUDE ASSIGNMENTS
a.Altitude information contained in a clearance,
instruction, or advisory to VFR aircraft must meetMV A, MSA, or minimum IFR altitude criteria.
b.Issue altitude assignments, if required, consis-
tent with the provisions of 14 CFR Section 91.119.
NOTE−
The MSAs are:
1.Over congested areas, an altitude at least 1,000 feet
above the highest obstacle,
2.Over other than congested areas, an altitude at least
500 feet above the surface.
REFERENCE −
F AAO JO 7110.65, Para 4 −5−2, Flight Direction.
F AAO JO 7110.65, Para 4 −5−3, Exceptions.
F AAO JO 7110.65, Para 4 −5−6, Minimum En Route Altitudes.
c.Aircraft assigned altitudes which are contrary to
14 CFR Section 91.159 must be advised to resume
altitudes appropriate for the direction of flight when
the altitude assignment is no longer required or whenleaving Class B airspace.
PHRASEOLOGY −
RESUME APPROPRIATE VFR ALTITUDES.
7−9−8. APPROACH INTERVAL
The tower must specify the approach interval.
JO 7110.65W 12/10/15
8−1−1 GeneralChapter 8. Offshore/Oceanic Procedures
Section 1. General
8−1−1. ATC SERVICE
Provide air traffic control service in oceanic
controlled airspace in accordance with the procedures
in this chapter except when other procedures/minima
are prescribed in a directive or a letter of agreement.
REFERENCE −
F AAO JO 7110.65, Procedural Letters of Agreement, Para 1 −1−9.
8−1−2. OPERATIONS IN OFFSHORE
AIRSPACE AREAS
Provide air traffic control service in of fshore airspace
areas in accordance with procedures and minima inthis chapter. For those situations not covered by this
chapter, the provisions in this Order must apply.
8−1−3. VFR FLIGHT PLANS
VFR flights in Oceanic FIRs may be conducted in
meteorological conditions equal to or greater thanthose specified in 14 CFR Section 91.155, Basic VFR
weather minimums. Operations on a VFR flight plan
are permitted only between sunrise and sunset andonly within:
a.Miami, Houston, and San Juan Oceanic Control
Areas (CTAs) below FL 180.
b.Within the Oakland FIR when operating less
than 100 NM seaward from the shoreline withincontrolled airspace.
c.All Oceanic FIR airspace below the Oceanic
CTAs.
8−1−4. TYPES OF SEPARATION
Separation must consist of at least one of the
following:
a.Vertical separation;
b.Horizontal separation, either;
1.Longitudinal; or
2.Lateral;
c.Composite separation;d.Radar separation, as specified in Chapter 5,
Radar, where radar coverage is adequate.
8−1−5. ALTIMETER SETTING
Within oceanic control areas, unless directed and/or
charted otherwise, altitude assignment must be based
on flight levels and a standard altimeter setting of
29.92 inches Hg.
8−1−6. RECEIPT OF POSITION REPORTS
When a position report affecting separation is not
received, take action to obtain the report no later than
10 minutes after the control estimate, unless
otherwise specified.
8−1−7. OCEANIC ERROR REPORT
PROCEDURES
FAAO 7110.82 establishes procedures for reporting
Gross Navigation Errors (GNE), height errors,
time(longitudinal) errors, intervention, and Special
Area of Operations (SAO) verification in oceanic
airspace. This data is needed for risk modeling
activities to support separation standard reductions.
8−1−8. USE OF CONTROL ESTIMATES
Control estimates are the estimated position of
aircraft, with reference to time as determined by theATC automation system in use or calculated by the
controller using known wind patterns, previous
aircraft transit times, pilot progress reports, and pilot
estimates. These estimates may be updated through
the receipt of automated position reports and/or
manually updated by the controller . Control estimates
must be used when applying time −based separation
minima.
8−1−9.RVSM OPERATIONS
Controller responsibilities for non −RVSM aircraft
operating in RVSM airspace must include but not be
limited to the following:
a.Ensure non −RVSM aircraft are not permitted in
RVSM airspace unless they meet the criteria of
JO 7110.65W 12/10/15
8−1−2 Generalexcepted aircraft and are previously approved by the
operations supervisor/CIC.
b.In addition to those aircraft listed in Chapter 2,
Section 1, Paragraph 2-1-28 RVSM Operations in this
order, the following aircraft operating within oceanic
airspace or transiting to/from oceanic airspace are
excepted:
1.Aircraft being initially delivered to the State
of Registry or Operator;
2.Aircraft that was formerly RVSM approved
but has experienced an equipment failure and is being
flown to a maintenance facility for repair in order tomeet RVSM requirements and/or obtain approval;3.Aircraft being utilized for mercy or
humanitarian purposes;
4.Within the Oakland, Anchorage, and Arctic
FIR’s, an aircraft transporting a spare engine
mounted under the wing.
(a)These exceptions are accommodated on a
workload or traffic-permitting basis.
(b)All other requirements contained in
paragraph 2-1-28 are applicable to this section.
REFERENCE −
F AAO JO 7110.65, Para 2-1-28, RVSM Operations
JO 7110.65W 12/10/15
8−2−1 CoordinationSection 2. Coordination
8−2−1. GENERAL
ARTCCs must:
a.Forward to appropriate ATS facilities, as a flight
progresses, current flight plan and control
information.
b.Coordinate flight plan and control information
in sufficient time to permit the receiving facility to
analyze the data and to effect any necessaryadditional coordination. This may be specified in a
letter of agreement.
c.Coordinate with adjacent ATS facilities when
airspace to be protected will overlap the common
boundary.
d.Forward revisions of estimates of 3 minutes or
more to the appropriate ATS facility.
e.Coordinate with adjacent facilities on IFR and
VFR flights to ensure the continuation of appropriate
air traffic services.
8−2−2. TRANSFER OF CONTROL AND
COMMUNICATIONS
a.Only one air traffic control unit must control an
aircraft at any given time.
b.The control of an aircraft must be transferred
from one control unit to another at the time the aircraftis estimated to cross the control boundary or at such
other point or time agreed upon by the two units.
c.The transferring unit must forward to the
accepting unit any changed flight plan or control data
which are pertinent to the transfer.
d.The accepting unit must notify the transferring
unit if it is unable to accept control under the terms
specified, or it must specify the changes or conditions
required so that the aircraft can be accepted.
e.The accepting unit must not alter the clearance
of an aircraft that has not yet reached the transfer of
control point without the prior approval of thetransferring unit.
f.Where nonradar separation minima are being
applied, the transfer of air-ground communications
with an aircraft must be made 5 minutes before the
time at which the aircraft is estimated to reach the
boundary unless otherwise agreed to by the control
and/or communication units concerned.
8−2−3. AIR TRAFFIC SERVICES
INTERFACILITY DATA COMMUNICATIONS(AIDC)
Where interfacility data communications capability
has been implemented, its use for ATC coordinationshould be accomplished in accordance with regional
Interface Control Documents, and supported by
letters of agreement between the facilities concerned.
JO 7110.65W 12/10/15
8−3−1 Longitudinal SeparationSection 3. Longitudinal Separation
8−3−1. APPLICATION
a.Longitudinal separation must be applied so that
the spacing between the estimated positions of theaircraft being separated is never less than a prescribed
minimum.
NOTE−
Consider separation to exist when the estimated positionsof the aircraft being separated are never less than aprescribed minimum.
b.In situations where one aircraft requires a
different time −based longitudinal standard than
another, apply the larger of the two standards between
the aircraft concerned.
c.Longitudinal separation expressed in distance
may be applied as prescribed in Chapter 6, Nonradar.
d.In situations where an update to a control
estimate indicates that the minimum being applied no
longer exists, controllers must ensure that separation
is reestablished. Issue traffic information as
necessary.
8−3−2. SEPARATION METHODS
a.For the purpose of application of longitudinal
separation, the terms same track must be considered
identical to same course , reciprocal tracks must be
considered identical to reciprocal courses , and
crossing tracks , must be considered identical to
crossing courses .
NOTE−
Refer to para 1 −2−2, Course Definitions.
b.Separate aircraft longitudinally in accordance
with the following:
1. Same track. Ensure that the estimated
spacing between aircraft is not less than theapplicable minimum required. (See FIG 8−3−1.)FIG 8−3−1
Same Courses
2. Crossing tracks. Ensure that the estimated
spacing at the point of intersection is not less than the
applicable minimum required. (See FIG 8−3−2.)
FIG 8−3−2
Crossing Courses
JO 7110.65W 12/10/15
8−3−2 Longitudinal Separation3. Reciprocal tracks:
(a)Ensure that aircraft are vertically separ-
ated for a time interval equal to the applicableminimum required before and after the aircraft are
estimated to pass. (See FIG 8−3−3.)
FIG 8−3−3
Reciprocal Courses
(b)Vertical separation may be discontinued
after one of the following conditions are met:
(1)Both aircraft have reported passing a
significant point and the aircraft are separated by at
least the applicable minimum required for the samedirection longitudinal spacing; (See FIG 8−3−4.) or
FIG 8−3−4
Vertical Separation
(2)Both aircraft have reported passing
ground-based NA V AIDs or DME fixes indicating
that they have passed each other.
8−3−3. MACH NUMBER TECHNIQUE
The use of Mach number technique allows for the
application of reduced longitudinal separation
minima. The following conditions must be met when
the Mach number technique is being applied:
a. Aircraft Types: Turbojet aircraft only.b. Routes:
1.The aircraft follow the same track or
continuously diverging tracks, and
2.The aircraft concerned have reported over a
common point; or
3.If the aircraft have not reported over a
common point, the appropriate time interval beingapplied between aircraft exists and will exist at the
common point; or,
4.If a common point does not exist, the
appropriate time interval being applied between
aircraft exists and will exist at significant points along
each track.
c. Altitudes: The aircraft concerned are in level,
climbing or descending flight.
d. Mach Number Assignment:
1.A Mach number (or, when appropriate, a
range of Mach numbers) must be issued to eachaircraft unless otherwise prescribed on the basis of
ICAO regional agreement.
NOTE−
1.The application of Mach number technique requires
pilots to strictly adhere to the last assigned Mach number(or range of Mach numbers), even during climbs and
descents, unless revised by ATC. Turbojet aircraft must
request ATC approval before making any changes. If it isessential to make an immediate temporary change in theMach number (e.g., due to turbulence), ATC must benotified as soon as possible that such a change has been
made.
2.When it is necessary to issue crossing restrictions to
ensure the appropriate time interval, it may be impossiblefor an aircraft to comply with both the clearance to meet the
crossing restrictions and the clearance to maintain a
single, specific Mach number.
REFERENCE −
ICAO DOC 9426 −AN/924, Part II, Section 2, Para 2.3.4, Para 2.4.7,
and Para 2.5.3.
EXAMPLE −
“Maintain Mach point eight four or greater.”“Maintain Mach point eight three or less.”“Maintain Mach point eight two or greater; do not exceed
Mach point eight four.”
e. Longitudinal Minima:
When the Mach number technique is applied,
minimum longitudinal separation must be:
1.10 minutes , provided that:
(a)The preceding aircraft maintains a Mach
number equal to, or greater than that maintained by
the following aircraft; or
JO 7110.65W 12/10/15
8−3−3 Longitudinal Separation(b)When the following aircraft is faster than
the preceding aircraft, at least 10 minutes exists until
another form of separation is achieved; or
2.Between 9 and 5 minutes inclusive, provided
that the preceding aircraft is maintaining a Mach
number greater than the following aircraft in
accordance with the following:
(a)9 minutes , if the preceding aircraft is
Mach 0.02 faster than the following aircraft;
(b)8 minutes , if the preceding aircraft is
Mach 0.03 faster than the following aircraft;
(c)7 minutes , if the preceding aircraft is
Mach 0.04 faster than the following aircraft;(d)6 minutes , if the preceding aircraft is
Mach 0.05 faster than the following aircraft;
(e)5 minutes , if the preceding aircraft is
Mach 0.06 faster than the following aircraft.
NOTE−
A “rule−of−thumb” may be applied to assist in providing
the required estimated spacing over the oceanic exit pointwhen either conflict pr obe is not in use or when requested
by another facility. This rule −of−thumb can be stated as
follows: For each 600 NM in distance between the entry
and exit points of the area where the Mach Number
Technique is used, add 1 minute for each 0.01 difference in
Mach number for the two air craft concerned to compensate
for the fact that the second aircraft is overtaking the firstaircraft. (See TBL 8 −3−1.)
TBL 8−3−1
Application of the Mach Number Technique When the Following Aircraft is Faster
Distance to Fly and Separation (in Minutes) Required at Entry Point
Difference in
Mach001−600 NM 601−1200 NM 1201−1800 NM 1801−2400 NM 2401−3000 NM
0.01 .......... 11 12 13 14 15
0.02 .......... 12 14 16 18 20
0.03 .......... 13 16 19 22 25
0.04 .......... 14 18 22 26 30
0.05 .......... 15 20 25 30 35
0.06 .......... 16 22 28 34 40
0.07 .......... 17 24 31 38 45
0.08 .......... 18 26 34 42 50
0.09 .......... 19 28 37 46 55
0.10 .......... 20 30 40 50 60
JO 7110.65W 12/10/15
8−4−1 Lateral SeparationSection 4. Lateral Separation
8−4−1. APPLICATION
Separate aircraft by assigning different flight paths
whose widths or protected airspace do not overlap.
Within that portion of the Gulf of Mexico Low
Offshore airspace, use 12 NM between aircraft whose
flight paths are defined by published Grid System
waypoints.
NOTE−
1.The Grid System is defined as those waypoints
contained within the Gulf of Mexico Low Offshor e airspace
and published on the IFR Vertical Flight Reference Chart.
2.Lateral separation minima is contained in:
Section 7, North Atlantic ICAO Region.
Section 8, Caribbean ICAO Region.Section 9, Pacific ICAO Region.
Section 10, North American ICAO Region −
Arctic CTA.
8−4−2. SEPARATION METHODS
Lateral separation exists for:
a. Nonintersecting flight paths:
1.When the required distance is maintained
between the flight paths; or (See FIG 8−4−1.)
FIG 8−4−1
Separation Methods
2.When reduced route protected airspace is
applicable, and the protected airspace of the flight
paths do not overlap; or (See FIG 8−4−2.)
FIG 8−4−2
Separation Methods
3.When aircraft are crossing an oceanic
boundary and are entering an airspace with a larger
lateral minimum than the airspace being exited; and
(a)The smaller separation exists at the
boundary; and
(b)Flight paths diverge by 15 /C0095 or more until
the larger minimum is established. (See FIG 8−4−3.)
FIG 8−4−3
Separation Methods
JO 7110.65W 12/10/15
8−4−2 Lateral Separationb.Intersecting flight paths with constant and same
width protected airspace when either aircraft is at or
beyond a distance equal to the applicable lateral
separation minimum measured perpendicular to the
flight path of the other aircraft. (See FIG 8−4−4.)
FIG 8−4−4
Separation Methods
c.Intersecting flight paths with constant but
different width protected airspace when either
aircraft is at or beyond a distance equal to the sum of
the protected airspace of both flight paths measured
perpendicular to the flight path of the other aircraft.
(See FIG 8−4−5.)
FIG 8−4−5
Separation Methods
d.Intersecting flight paths with variable width
protected airspace when either aircraft is at or beyond
a distance equal to the sum of the protected airspace
of both flight paths measured perpendicular to the
flight path of the other aircraft. Measure protectedairspace for each aircraft perpendicular to its flight
path at the first point or the last point, as applicable,
of protected airspace overlap.
NOTE−
In FIG 8−4−5, the protected airspace for westbound
flight A is distance “a” (50 miles), and for southwestbound
flight B, distance “b” (10 miles). Therefore, the sum ofdistances “a” and “b”; i.e., the protected airspace ofAircrafts A and B, establishes the lateral separationminimum (60 miles) applicable for either flight relevant to
the other.
FIG 8−4−6
Separation Methods
NOTE−
(See FIG 8−4−6.) At the first point of protected airspace
overlap, the protected airspace for westbound flight A is
distance “a” (50 miles), and for southbound flight B,distance “b” (40 miles). The sum of distances “a” and “b”
(90 miles) establishes the lateral separation minimumapplicable in this example for either flight as it appr oaches
the intersection. For example, Aircraft B should be
vertically separated from Aircraft A by the time it reachespoint “p.”
JO 7110.65W 12/10/15
8−4−3 Lateral SeparationFIG 8−4−7
Separation Methods
NOTE−
(See FIG 8 −4−7.) Distance “a” (50 miles) and “b”
(30 miles) are determined at the last point of protectedairspace overlap. The sum of the distances “a” and “b”(80 miles) establishes the lateral separation minimaapplicable for either flight after it passes beyond the
intersection. For example, Aircraft B could be cleared to,
or through, Aircraft A’ s altitude after passing point “r.”
8−4−3. REDUCTION OF ROUTE
PROTECTED AIRSPACE
When routes have been satisfactorily flight checked
and notice has been given to users, reduction in route
protected airspace may be made as follows:
a.Below FL 240, reduce the width of the protected
airspace to 5 miles on each side of the route centerline
to a distance of 57.14 miles from the NA V AID, then
increasing in width on a 5 /C0095 angle from the route
centerline, measured at the NA V AID, to the
maximum width allowable within the lateral minima;
for example, 50 miles of protected airspace on each
side of centerline; i.e., a lateral minimum of
100 miles. (See FIG 8−4−8.)FIG 8−4−8
Reduction of Route Protected Airspace
b.At and above FL 240, reduce the width of the
protected airspace to 10 miles on each side of the
route centerline to a distance of 1 14.29 miles from the
NAVAID, then increasing in width on a 5 /C0095 angle from
the route centerline, as measured at the NA V AID, to
the maximum width allowable within the lateral
minima; for example, 60 miles of protected airspaceon each side of the centerline; i.e., a lateral separation
minimum of 120 miles. (See FIG 8−4−9.)
FIG 8−4−9
Reduction of Route Protected Airspace
JO 7110.65W 12/10/15
8−4−4 Lateral Separation8−4−4. TRACK SEPARATION
Apply track separation between aircraft by requiring
aircraft to fly specified tracks or radials and with
specified spacings as follows:
a.Same NAVAID:
1.VOR/VORTAC/TACAN. Consider separa-
tion to exist between aircraft established on radials of
the same NA VAID that diverge by at least 15 degrees
when either aircraft is clear of the airspace to be
protected for the other aircraft. Use TBL 8 −4−1 to
determine the flight distance required for various
divergence angles and altitudes to clear the airspace
to be protected. (See FIG 8−4−10.)
TBL 8−4−1
Divergence-Distance Minima
VOR/VORTAC/TACAN
Distance (mile)
Divergence (degrees)FL 230 and
belowFl 240
through
FL 450
15−25 17 18
26−35 11 13
36−90 8 11
Note: This table compensates for DME slant range
error.
FIG 8−4−10
Track Separation VOR
2.NDB:
(a)Consider separation to exist between
aircraft established on tracks of the same NA V AID
that diverge by at least 30 degrees and one aircraft isat least 15 miles from the NA V AID. This separation
must not be used when one or both aircraft are
inbound to the aid unless the distance of the aircraft
from the facility can be readily determined by
reference to the NA V AID. Use TBL 8 −4−2 to
determine the flight distance required for various
divergence angles to clear the airspace to be
protected. For divergence that falls betweentwo values, use the lesser value to obtain the distance.
(See FIG 8−4−11.)
TBL 8−4−2
Divergence-Distance Minima (NDB)
Distance (mile)
Divergence (degrees)FL 230 and
belowFL 240
through
FL 450
Note: This table compensates for DME slant range
error.
FIG 8−4−11
Track Separation NDB
JO 7110.65W 12/10/15
8−4−5 Lateral Separation(b)Clear aircraft navigating on NDB facilit-
ies in accordance with para 2 −5−2, NA V AID Terms.
b. Different NA V AIDs: Separate aircraft using
different navigation aids by assigning tracks so that
their protected airspace does not overlap.
(See FIG 8−4−12.)
FIG 8−4−12
Track Separation
Different NA V AIDs
c. Dead Reckoning (DR):
1.Consider separation to exist between aircraft
established on tracks that diverge by at least
45 degrees when one aircraft is at least 15 miles from
the point of intersection of the tracks. This point may
be determined either visually or by reference to a
ground−based navigation aid. (See FIG 8−4−13.)
FIG 8−4−13
Track Separation
Dead Reckoning
JO 7110.65W 12/10/15
8−5−1 Offshore/Oceanic Transition ProceduresSection 5. Offshore/Oceanic Transition Procedures
8−5−1. ALTITUDE/FLIGHT LEVEL
TRANSITION
When vertical separation is applied between aircraft
crossing the offshore/oceanic airspace boundary
below FL 180, control action must be taken to ensure
that differences between the standard altimeter
setting (QNE) and local altimeter setting (QNH) do
not compromise separation. (See FIG 8−5−1.)
FIG 8−5−1
Standard and Local Altimeter Setting Differences
8−5−2. COURSE DIVERGENCE
When aircraft are entering oceanic airspace,
separation will exist in oceanic airspace when:
a.Aircraft are established on courses that diverge
by at least 15 degrees until oceanic lateral separation
is established, andb.The aircraft are horizontally radar separated and
separation is increasing at the edge of known radar
coverage.
8−5−3. OPPOSITE DIRECTION
When transitioning from an offshore airspace area to
oceanic airspace, an aircraft may climb throughopposite direction oceanic traffic provided vertical
separation above that traffic is established:
a.Before the outbound crosses the offshore/
oceanic boundary; and
b.15 minutes before the aircraft are estimated to
pass. (See FIG 8−5−2.)
FIG 8−5−2
Transitioning From Offshore to Oceanic Airspace
Opposite Direction
JO 7110.65W 12/10/15
8−5−2 Offshore/Oceanic Transition Procedures8−5−4. SAME DIRECTION
When transitioning from an offshore airspace area to
oceanic airspace or while within oceanic airspace,
apply 5 minutes minimum separation when afollowing aircraft on the same course is climbing
through the altitude of the preceding aircraft if the
following conditions are met:
a.The preceding aircraft is level at the assigned
altitude and is maintaining a speed equal to or greater
than the following aircraft; and
b.The minimum of 5 minutes is maintained
between the preceding and following aircraft; and
c.The following aircraft is separated by not more
than 4,000 feet from the preceding aircraft when theclimb clearance is issued; and
d.The following aircraft commences climb within
10 minutes after passing:
1.An exact reporting point (DME fix or
intersection formed from NA V AIDs) which thepreceding aircraft has reported; or
2.A radar observed position over which the
preceding aircraft has been observed; and
e.The following aircraft is in direct
communication with air traffic control until verticalseparation is established. (See FIG 8−5−3.)
FIG 8−5−3
Transitioning From Offshore to Oceanic Airspace
Same Direction
8−5−5. RADAR IDENTIFICATION
APPLICATION
Radar separation standards may be applied between
radar identified aircraft and another aircraft not yet
identified that is in transit from oceanic airspace or
non-radar offshore airspace into an area of known
radar coverage where radar separation is applied
provided:
a.Direct radio communications is maintained
with one of the aircraft involved and there is an ability
to communicate with the other;
b.The transiting aircraft is RNA V equipped;
c.The performance of the radar/system is
adequate;
REFERENCE −
F AA Order JO 7110.65, Para 5-1-1, Presentation and Equipment
Performance
d.Flight data on the aircraft that has not been radar
identified indicate that it is equipped with a standard
transponder and there is no known information that
the transponder is not operating;
e.Radar separation standards are maintained
between the radar identified aircraft and any otherobserved targets until the transitioning aircraft is
radar identified or non-radar separation is estab-
lished;
f.The facility has identified areas of known radar
coverage, incorporated those areas into facilitystandard operating procedures (SOP), and provided
training to the controllers.
g.This procedure is also applicable to aircraft in
transit from oceanic airspace into Guam Control Area
(CTA), San Juan CTA and Honolulu CTA radarcoverage areas.
h.EXCEPTION: This procedure is not authorized
if there is insufficient time for the controller to
establish other approved separation in the event of a
delay or inability to establish radar identification ofthe transiting aircraft taking into consideration
factors such as aircraft performance characteristics,
type, and speed; weather, traffic conditions;workload; frequency congestion; etc.
REFERENCE −
F AAO JO 7110.65, Para 2-2-6,IFR Flight Progreass Data,Subpara2-2-6.b.
F AAO JO 7110.65, Para8-1-8, use of Control Estimates
JO 7110.65W 12/10/15
8−6−1 Separation from Airspace ReservationsSection 6. Separation from Airspace Reservations
8−6−1. TEMPORARY STATIONARY
AIRSPACE RESERVATIONS
Separate aircraft from a temporary stationary
reservation by one of two methods:
a. Laterally: Clear aircraft so that the protected
airspace along the route of flight does not overlap the
geographical area of the stationary reservation.
(See FIG 8−6−1.)
FIG 8−6−1
Temporary Stationary Airspace Reservations
Lateral Separation
b. Vertically: Clear aircraft so that vertical
separation exists while the aircraft is within a
geographical area defined as the stationary reserva-tion plus a buffer around the perimeter equivalent to
one-half the lateral separation minimum.
(See FIG 8−6−2.)FIG 8−6−2
Temporary Stationary Airspace Reservations
Vertical Separation
8−6−2. REFUSAL OF AVOIDANCE
CLEARANCE
If a pilot refuses to accep t a clearance to avoid a
reservation, inform him/her of the potential hazard,
advise him/her that services will not be provided
while the flight is within the reservation and, ifpossible, inform the appropriate using agency.
8−6−3. TEMPORARY MOVING AIRSPACE
RESERVATIONS
Separate aircraft from a temporary moving airspace
reservation by one of the following methods:
a. Laterally: Clear aircraft so that the protected
airspace along the route of flight does not overlap the
(time-dependent) geographical area of the movingairspace reservation.
b. Longitudinally: Clear aircraft so that the
appropriate longitudinal minimum exists ahead of the
first or behind the last aircraft operating within the
reservation.
c. Vertically: Clear aircraft so that vertical
separation exists while the aircraft is within a(time-dependent) geographical area defined as the
moving airspace reservation plus a buffer around the
perimeter e quivalent to one-half the lateral separation
minimum.
JO 7110.65W 12/10/15
8−7−1 North Atlantic ICAO RegionSection 7. North Atlantic ICAO Region
8−7−1. APPLICATION
Provide air traffic control services in the North
Atlantic ICAO Region with the procedures andminima contained in this section except when noted
otherwise.
8−7−2. VERTICAL SEPARATION
Provide vertical separation in accordance with
Chapter 4, IFR, Section 5, Altitude Assignment and
Verification.
8−7−3. LONGITUDINAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 3, L ongitudinal Separation,
apply the following:
a. Supersonic flight:
1.10 minutes provided that:
(a)both aircraft are in level flight at the same
Mach number or the aircraft are of the same type and
are both operating in cruise climb, and one of the
following;
(1)The aircraft concerned have reported
over a common point; or,
(2)If the aircraft have not reported over a
common point, the appropriate time interval beingapplied between aircraft exists and will exist at the
common point; or,
(3)If a common point does not exist, the
appropriate time interval being applied between
aircraft exists and will exist at significant points along
each track.
2.15 minutes between aircraft in supersonic
flight not covered in subpara a1 above.
b.Turbojet operations (subsonic flight) :
1.Apply the prescribed minima in accordance
with para 8 −3−3, Mach Number Technique; or
2.Where tracks diverge from the common point
and the following aircraft is maintaining a greaterMach Number than the preceding aircraft:(a)At least 10 minutes longitudinal separa-
tion exists at the point where the tracks diverge; and
(b)At least 5 minutes longitudinal separation
will exist where minimum lateral separation is
achieved (whichever is estimated to occur first) ;
(1)At or before the next significant point
(normally within ten degrees of longitude alongtrack(s)), or
(2)Within 90 minutes of the time the
following aircraft passes the common point, or
(3)Within 600 NM of the common point.
3.Apply 15 minutes between all other turbojet
aircraft.
c.Nonturbojet operations:
1.Apply
20 minutes between aircraft operating
in the West Atlantic Route System (WATRS), or
2.Apply 30 minutes between aircraft operating
outside of the WATRS.
NOTE−
The WATRS area is defined as beginning at a point
27/C009500’N/77 /C009500’W direct to 20 /C009500’N/67 /C009500’W direct to
18/C009500’N/62 /C009500’W direct to 18 /C009500’N/60 /C009500’W direct to
38/C009530’N/60 /C009500’W direct to 38 /C009530’N/69 /C009515’W, thence
counterclockwise along the New York Oceanic CTA/FIR
boundary to the Miami Oceanic CTA/FIR boundary,
thence southbound along the Miami Oceanic CTA/FIRboundary to the point of beginning.
d.Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
1.The ITP climb or descent has been requested
by the pilot;
2.The aircraft identification of each reference
aircraft in the ITP request exactly matches the Item 7
- aircraft identification of the corresponding aircraft’s
filed flight plan;
3.The reported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or more;
4.Both the ITP aircraft and reference aircraft
are either on:
(a)same identical tracks and any turn at a
waypoint shall be limited to less than 45 degrees; or5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−7−2 North Atlantic ICAO Region(b)same tracks with no turns permitted that
degrade required separation during the ITP.
NOTE−
Same identical tracks are where the angular difference is
zero degrees.
5.No speed or route change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
6.The altitude difference between the ITP
aircraft and any reference aircraft shall be 2000 ft or
less;
7.No instruction to amend speed, altitude or
route shall be issued to any reference aircraft until the
ITP climb or descent is completed;
8.The maximum closing speed between the ITP
aircraft and each reference aircraft shall be Mach
0.06; and
9.The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
NOTE−
ATOP is designed to check for the above criteria prior to
allowing the minima to be provided.
e.Minima based on distance using Automatic
Dependent Surveillance – Contract (ADS-C):
1.Apply the minima as specified in TBL 8-7-1
between aircraft on the same track within airspace
designated for Required Navigation Performance
(RNP), provided:
(a)Direct controller/pilot communication via
voice or Controller Pilot Data Link Communications
(CPDLC) is established, and
(b)The required ADS-C periodic reports are
maintained and monitored by an automated flight
data processor (for example, Ocean21).
FIG 8−7−1
ADS−C Criteria
Minima RNPMaximum ADS-C
Periodic Reporting
Interval
50 NM 10 27 minutes
50 NM 4 32 minutes
30 NM 4 10 minutes2.Aircraft on reciprocal tracks may be cleared
to climb or descend to or through the altitude(s)
occupied by another aircraft provided:
(a)An ADS-C position report on at least one
of the aircraft has been received beyond the passing
point, and
(b)The aircraft have passed each other by the
applicable separation minimum.
NOTE−
Ocean21 has been designed to check for the above cri teria
prior to allowing the minima to be provided.
3.When an ADS-C periodic or waypoint
change event report is overdue by 3 minutes , the
controller must take action to obtain an ADS-Creport.
4.If no report is received within 6 minutes of the
time the original report was due, the controller musttake action to apply another form of separation.
8−7−4. LATERAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 4, Lateral Separation, apply the
following:
a.30 NM to RNP-4 approved aircraft operating
within airspace designated for RNP-4 when direct
controller/pilot communications, via voice or
Controller Pilot Data Link Communications(CPDLC), and the required ADS-C contracts are
maintained and monitored by an automated flight
data processor (e.g., Ocean21).
b.50 NM between Required Navigation Perform-
ance (RNP 4 or RNP 10) approved aircraft which:
1.Operate on routes or in areas within WA TRS,
the San Juan CTA/FIR or the Atlantic portion of theMiami Oceanic CTA/FIR; or
2.Operate in the New York Oceanic CTA/FIR
outside of WATRS.
NOTE−
This reduced lateral separation must not be used if
track−keeping capability of the aircraft has been reduced
for any reason.
c.60 NM or 1 degree latitude between:
1.Supersonic aircraft operating above FL 275.
2.Aircraft which meet the MNPS and which:
(a)Operate within MNPS airspace; or3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
8−7−3 North Atlantic ICAO Region(b)Are in transit to or from MNPS airspace;
or
(c)Operate for part of their flight within,
above, or below MNPS airspace .
NOTE−
This reduced lateral separation must not be used if
track−keeping capability of the aircraft has been reduced
for any reason.
d.90 NM or 1 and 1/2 degrees latitude between
aircraft not approved for RNP 4 or RNP 10 andwhich:
1.Operate on routes or in areas within WA TRS,
the San Juan CTA/FIR or the Atlantic portion of the
Miami CTA/FIR;
2.Operate between points in the U.S. or
Canada, and Bermuda;
3.Operate west of 55 /C0095 West between the U.S.,
Canada, or Bermuda and points in the CaribbeanICAO Region.
e.120 NM or 2 degrees latitude between aircraft
not covered by subparas a, c or d above.
NOTE−
Tracks may be spaced with reference to their difference inlatitude, provided that in any interval of 10 degrees oflongitude the change in latitude of at least one of the tracksdoes not exceed 3 degrees when operating south of
58/C0095North.
8−7−5. PROCEDURES FOR WEATHER
DEVIATIONS IN NORTH ATLANTIC (NAT)
AIRSPACE
Aircraft must request an ATC clearance to deviate.
Since aircraft will not fly into known areas of
weather, weather deviation requests should takepriority over routine requests. If there is no traffic in
the horizontal dimension, ATC must issue clearance
to deviate from track; or if there is conflicting trafficin the horizontal dimension, ATC separates aircraft
by establishing vertical separation. If there is
conflicting traffic and ATC is unable to establish therequired separation, ATC must:
a.Advise the pilot unable to issue clearance for
requested deviation;
b.Advise the pilot of conflicting traffic; and
c.Request pilot’s intentions.
PHRASEOLOGY −
UNABLE (requested deviation), TRAFFIC IS (call sign,position, altitude, direction), ADVISE INTENTIONS.
NOTE−
1.The pilot will advise ATC of intentions by the most
expeditious means available.
2.In the event that pilot/controller communications
cannot be established or a revised ATC clearance is notavailable, pilots will follow the procedures outlined in the
Regional Supplementary Procedures, ICAO Doc. 7030.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−8−1 Caribbean ICAO RegionSection 8. Caribbean ICAO Region
8−8−1. APPLICATION
Provide air traffic control services in the Caribbean
ICAO Region with the procedures and minima
contained in this section except when noted
otherwise.
8−8−2. VERTICAL SEPARATION
Provide vertical separation in accordance with
Chapter 4, IFR, Section 5, Altitude Assignment and
Verification.
8−8−3. LONGITUDINAL SEPARATION
Provide longitudinal separation between aircraft as
follows:
a.Supersonic flight:
1.10 minutes provided both aircraft are in level
flight at the same Mach number or the aircraft are ofthe same type and are both operating in cruise climb,
and one of the following;
(a)Both aircraft have reported over a
common point; or,
(b)If both aircraft have not reported over a
common point, the appropriate time interval being
applied between aircraft exists and will exist at thecommon point; or,
(c)If a common point does not exist, the
appropriate time interval being applied between
aircraft exists and will exist at significant points along
each track.
2.15 minutes between all other aircraft.
b.Turbojet operations at or above FL 200 in the
Miami Oceanic, Houston Oceanic and San JuanCTAs/FIRs and all altitudes in the West Atlantic
Route System (WATRS) and New York Oceanic
CTA/FIR (subsonic flight) :
1.Apply the prescribed minima in accordance
with para 8 −3−3, Mach Number Technique; or
2.In the New York CTA/FIR, where tracks
diverge from the common point and the followingaircraft is maintaining a greater Mach number than
the preceding aircraft:(a)At least 10 minutes longitudinal separa-
tion exists at the point where the tracks diverge; and
(b)At least 5 minutes longitudinal separation
will exist where minimum lateral separation isachieved (whichever is estimated to occur first) ;
(1)At or before the next significant point
(normally within ten degrees of longitude along
track(s)), or
(2)Within 90 minutes of the time the
following aircraft passes the common point, or
(3)Within 600 NM of the common point; or
3.Apply 15 minutes between all other turbojet
aircraft.
c.Turbojet operations below FL 200 (subsonic
flight)
:
Apply 20 minutes between turbojet aircraft operating
below FL 200 in the San Juan Oceanic (outside the
WATRS area) , Miami Oceanic and Houston Oceanic
CTAs/FIRs.
d.Nonturbojet operations.
1.Apply 20 minutes between aircraft operating
in the WATRS; or
2.Apply 20 minutes between aircraft operating
below FL 200 in the Miami Oceanic, Houston
Oceanic and San Juan CTAs/FIRs; or
3.Apply 30 minutes between aircraft operating
outside of the WATRS in the New York CTA/FIR.
NOTE−
The WATRS area is defined as beginning at a point
27/C009500’N/77 /C009500’W direct to 20 /C009500’N/67 /C009500’W direct to
18/C009500’N/62 /C009500’W direct to 18 /C009500’N/60 /C009500’W direct to
38/C009530’N/60 /C009500’W direct to 38 /C009530’N/69 /C009515’W, thence
counterclockwise along the New York Oceanic CTA/FIR
boundary to the Miami Oceanic CTA/FIR boundary,thence southbound along the Miami Oceanic CTA/FIRboundary to the point of beginning.
e.Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
1.The ITP climb or descent has been requested
by the pilot;5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−8−2 Caribbean ICAO Region2.The aircraft identification of each reference
aircraft in the ITP request exactly matches the Item 7
- aircraft identification of the corresponding aircraft’s
filed flight plan;
3.The reported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or more;
4.Both the ITP aircraft and reference aircraft
are either on:
(a)same identical tracks and any turn at a
waypoint shall be limited to less than 45 degrees; or
(b)same tracks with no turns permitted that
degrade required separation during the ITP.
NOTE−
Same identical tracks are where the angular difference is
zero degrees.
5.No speed or route change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
6.The altitude difference between the ITP
aircraft and any reference aircraft shall be 2000 ft or
less;
7.No instruction to amend speed, altitude or
route shall be issued to any reference aircraft until the
ITP climb or descent is completed;
8.The maximum closing speed between the ITP
aircraft and each reference aircraft shall be Mach
0.06; and
9.The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
NOTE−
ATOP is designed to check for the above criteria prior to
allowing the minima to be provided.
f.Minima based on distance using Automatic
Dependent Surveillance – Contract (ADS-C):
1.Apply the minima as specified in TBL 8-8-1
between aircraft on the same track within airspace
designated for Required Navigation Performance(RNP), provided:
(a)Direct controller/pilot communication via
voice or Controller Pilot Data Link Communications
(CPDLC) is established, and
(b)The required ADS-C periodic reports are
maintained and monitored by an automated flight
data processor (for example, Ocean21).FIG 8−8−1
ADS−C Criteria
Minima RNPMaximum ADS-C
Periodic Reporting
Interval
50 NM 10 27 minutes
50 NM 4 32 minutes
30 NM 4 10 minutes
2.Aircraft on reciprocal tracks may be cleared
to climb or descend to or through the altitude(s)
occupied by another aircraft provided:
(a)An ADS-C position report on at least one
of the aircraft has been received beyond the passing
point, and
(b)The aircraft have passed each other by the
applicable separation minimum.
NOTE−
Ocean21 has been designed to check for the above criteria
prior to allowing the minima to be provided.
3.When an ADS-C periodic or waypoint
change event report is overdue by 3 minutes , the
controller must take action to obtain an ADS-C
report.
4.If no report is received within 6 minutes of the
time the original report was due, the controller must
take action to apply another form of separation.
8−8−4. LATERAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 4, Lateral Separation, apply the
following:
a.30 NM to RNP-4 approved aircraft operating
within airspace designated for RNP-4 when direct
controller/pilot communications, via voice or Con-
troller Pilot Data Link Communications (CPDLC),
and the required ADS-C contracts are maintained and
monitored by an automated flight data processor(e.g., Ocean21).
b.50 NM between Required Navigation Perform-
ance (RNP 4 or RNP 10) approved aircraft which:
1.Operate on routes or in areas within WA TRS,
the San Juan CTA/FIR or the Atlantic portion of theMiami Oceanic CTA/FIR; or
2.Operate in the New York Oceanic CTA/FIR
outside of WATRS; or3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
8−8−3 Caribbean ICAO Region3.Operate in the Houston Oceanic CTA/FIR or
the Gulf of Mexico portion of the Miami CTA/FIR.
NOTE−
This reduced lateral separation must not be used if
track−keeping capability of the aircraft has been reduced
for any reason.
c.60 NM between:
1.Supersonic aircraft operating above FL 275
within the New York oceanic CTA/FIR.
2.Supersonic aircraft operating at or above
FL 450 not covered in subpara 1 above.
3.Aircraft which meet the MNPS and which:
(a)Operate within MNPS airspace; or
(b)Are in transit to or from MNPS airspace;
or
(c)Operate for part of their flight within,
above, or below MNPS airspace.
NOTE−
This reduced lateral separation must not be used if
track−keeping capability of the aircraft has been reduced
for any reason.
d.90 NM between aircraft not approved for RNP 4
or RNP 10 and which:1.Operate within WATRS ; or
2.Operate west of 55 /C0095 West between the U.S.,
Canada, or Bermuda and points in the CaribbeanICAO Region.
e.100 NM between aircraft operating west of
55/C0095West not covered by subparas a, c or d above.
f.120 NM between aircraft operating east of
55/C0095West.
8−8−5. VFR CLIMB AND DESCENT
a.In the Houston, Miami, and San Juan CTAs, IFR
flights may be cleared to climb and descend in VFR
conditions only:
1.When requested by the pilot; and
2.Between sunrise and sunset.
b.Apply the following when the flight is cleared:
1.If there is a possibility that VFR conditions
may become impractical, issue alternative
instructions.
2.Issue traffic information to aircraft that are
not separated in accordance with the minima in this
section.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−9−1 Pacific ICAO RegionSection 9. Pacific ICAO Region
8−9−1. APPLICATION
Provide air traffic control services in the Pacific
ICAO Region with the procedures and minima
contained in this section except when notedotherwise.
8−9−2. VERTICAL SEPARATION
Provide vertical separation in accordance with
Chapter 4, IFR, Section 5, Altitude Assignment and
Verification, except when aircraft operate within
airspace where composite separation and procedures
are authorized, apply the minima specified in
para 8−9−5, Composite Separation Minima .
8−9−3. LONGITUDINAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 3, L ongitudinal Separation,
apply the following:
a.Minima based on time:
1.15 minutes between aircraft; or
2.10 minutes between turbojet aircraft whether
in level, climbing or descending flight, provided that
the aircraft concerned follow the same track or
continuously diverging tracks until some other formof separation is provided; or
3.The prescribed minima in accordance with
para 8−3−3, Mach Number Technique.
4.Reciprocal track aircraft − Where lateral
separation is not provided, vertical separation mustbe provided at least 10 minutes before and after the
time the aircraft are estimated to pass or are estimated
to have passed.
b.Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
1.The ITP climb or descent has been requested
by the pilot;
2.The aircraft identification of each reference
aircraft in the ITP request exactly matches the Item 7- aircraft identification of the corresponding aircraft’s
filed flight plan;
3.The reported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or more;
4.Both the ITP aircraft and reference aircraft
are either on:
(a)Same identical tracks and any turn at a
waypoint shall be limited to less than 45 degrees; or
(b)same tracks with no turns permitted that
degrade required separation during the ITP.
NOTE−
Same identical tracks are where the angular difference is
zero degrees.
5.No speed or route change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
6.The altitude difference between the ITP
aircraft and any reference aircraft shall be 2000 ft or
less;
7.No instruction to amend speed, altitude or
route shall be issued to any reference aircraft until the
ITP climb or descent is completed;
8.The maximum closing speed between the ITP
aircraft and each reference aircraft shall be Mach
0.06; and
9.The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
NOTE−
ATOP is designed to check for the above criteria prior to
allowing the minima to be provided.
c.Minima based on distance using Automatic
Dependent Surveillance − Contract (ADS −C):
1.Apply the minima as specified in TBL 8 −9−1,
ADS−C Criteria, between aircraft on the same track
within airspace designated for Required NavigationPerformance (RNP), provided:
(a)Direct controller/pilot communication via
voice or Controller Pil ot Data Link Communications
(CPDLC) is established, and
(b)The required ADS −C periodic reports are
maintained and monitored by an automated flight
data processor (e.g., Ocean21);5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−9−2 Pacific ICAO RegionTBL 8−9−1
ADS−C Criteria
Minima RNP Maximum ADS −C
Periodic Reporting
Interval
50 NM 10 27 minutes
50 NM 4 32 minutes
30 NM 4 14 minutes
2.Aircraft on reciprocal tracks may be cleared
to climb or descend to or through the altitude(s)
occupied by another aircraft provided that:
(a)An ADS−C position report on at least one
of the aircraft has been received beyond the passingpoint, and
(b)The aircraft have passed each other by the
applicable separation minimum.
NOTE−
Ocean21 has been designed to check for the above criteria
prior to allowing the minima to be provided.
3.When an ADS −C periodic or waypoint
change event report is overdue by 3 minutes , the
controller must take action to obtain an ADS −C
report.
4.If no report is received within 6 minutes of the
time the original report was due, the controller musttake action to apply another form of separation.
d.Minima based on distance without ADS−C:
1.Apply 50 NM between aircraft cruising,
climbing or descending on the same track or
reciprocal track that meet the requirements for and
are operating within airspace designated for RNP −10
operations provided:
(a)Direct controller/pilot communication via
voice or CPDLC is maintained; and
(b)Separation is established by ensuring that
at least 50 NM longitudinal separation minima exists
between aircraft positions as reported by reference to
the same waypoint.
(1)Same track aircraft − whenever pos-
sible ahead of both; or
(2)Reciprocal track aircraft − provided
that it has been positively established that the aircraft
have passed each other.2.Distance verification must be obtained from
each aircraft at least every 24 minutes to verify that
separation is maintained.
3.If an aircraft fails to report its position within
3 minutes after the expected time, the controller must
take action to establish communication. If commu-
nication is not established within 8 minutes after the
time the report should have been received, the
controller must take action to apply another form of
separation.
NOTE−
When same track aircraft are at, or are expected to reduce
to, the minima, speed contr ol techniques should be applied
in order to maintain the required separation.
e.Minima based on DME/RNA V:
Apply the following DME/RNA V minima in
Control 1234H, Control 1487H and the Norton
Sound High Control areas to turbojet aircraft
established on or transitioning to the North Pacific(NOPAC) Route System.
1.30 NM between aircraft when DME reports or
radar observations are used to establish the distance,
otherwise at least 40 NM based on RNA V must be
applied; and
2.Unless both aircraft are radar identified, both
aircraft must provide DME/RNA V distance reports
via direct voice that indicates the appropriate
separation exists; and
3.Application of DME/RNA V separation
without direct voice communications may not
continue for more than 90 minutes; and
4.The preceding aircraft is assigned the same
or greater Mach number than the following aircraft;
and
5.Both aircraft must be advised of the other
aircraft involved, including the distance relative to
the flights.
EXAMPLE −
“Maintain Mach point eight four, same direction traffic,twelve o’clock, three five miles.”
REFERENCE −
F AAO JO 7110.65, Para 2 −1−21, Traffic Advisories.
8−9−4. LATERAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 4, Lateral Separation, apply the
following:3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
8−9−3 Pacific ICAO Regiona.Within areas where Required Navigation
Performance 10 (RNP −10) separation and proced-
ures are authorized, apply 50 NM to RNP −10
approved aircraft.
b.Apply 30 NM to RNP−4 approved aircraft
operating within airspace designated for RNP −4
when direct controller/pilot communications, via
voice or Controller Pilot Data Link Communications
(CPDLC), and the required ADS −C contracts are
maintained and monitored by an automated flight
data processor (e.g., Ocean21).
c.When aircraft operate within airspace where
composite separation and procedures are authorized,
apply the minimum specified in para 8 −9−5,
Composite Separation Minima .
d.Apply 100 NM to aircraft not covered by
subparas a, b or c.
8−9−5. COMPOSITE SEPARATION MINIMA
Provide composite separation within the Central East
Pacific (CEP) and North Pacific (NOPAC) composite
route systems and where designated by facilitydirective in the Pacific Organized Track System
(PACOTS) at and above FL 290 as follows:
a.1,000 feet vertical separation; and
b.50 NM lateral separation.
8−9−6. COMPOSITE SEPARATION
ALTITUDE ASSIGNMENT
a.Aircraft operating at or above FL 300 in a
composite route system may be cleared at even flight
levels. Additionally, aircraft may be cleared at evenflight levels while joining, crossing, or leaving a
composite route system provided such aircraft
leaving the system are cleared to an appropriate odd
cardinal flight level when noncomposite vertical or
lateral separation is achieved.
b.Aircraft (operating at or above FL 300) leaving
a composite route system at an even cardinal flight
level do not have to be assigned an odd cardinal flight
level provided:
1.The aircraft is being provided radar service;
and2.The aircraft will be cleared for descent and
approach to an airport within the facility’s domestic
FIR; and
3.There is an operational advantage.
c.Aircraft operating on unidirectional routes or
traffic flows may be assigned altitudes other than the
appropriate altitude for direction of flight provided
that 2,000 feet vertical separation is maintained
between aircraft operating on the same route.
8−9−7. COMPOSITE SEPARATION
APPLICATION
Provide composite separation in the CEP and the
North Pacific (NOPAC) composite route systems and
where designated by facility directive in the PacificOrganized Track System (PACOTS) as follows:
a.Clear an aircraft to join an outer route of the
composite route system at other than the normal entry
point provided:
1.Longitudinal or noncomposite vertical sepa-
ration exists between that aircraft and any other
aircraft on that route; and
2.Composite separation exists between that
aircraft and any other aircraft on the next adjacentroute.
b.Clear an aircraft to leave an outer route of the
composite route system at other than the normal exit
point provided its course diverges so that lateral
spacing from the route system increases until
noncomposite separation exists between that aircraft
and any other aircraft in the composite route system.
c.Clear an aircraft to change from one route to an
adjacent route within the composite route system
provided:
1.Longitudinal or noncomposite vertical sepa-
ration is maintained between that aircraft and any
other aircraft on the route being vacated until that
aircraft is established on the route to which it isproceeding; and
2.Longitudinal or noncomposite vertical sepa-
ration exists between that aircraft and any other
aircraft on the route to which that aircraft isproceeding; and
3.Composite separation exists between that
aircraft and any other aircraft on the next adjacent
route.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−9−4 Pacific ICAO Regiond.Clear an aircraft to cross the composite route
system provided longitudinal or noncomposite
vertical or lateral separation exists between that
aircraft and any other aircraft in the composite route
system.
e.Clear aircraft to transition to or from the
composite route system from an Oceanic TransitionRoute (OTR) provided:
1.The OTR is charted on aeronautical charts;
and
2.Composite separation is maintained between
that aircraft and any other aircraft within the
composite route system; and
NOTE−
An aircraft is within the confines of a composite routesystem when the air craft joins or crosses the outer route of
the composite route system or passes a composite routeentry point.
3.Composite separation is maintained between
that aircraft and any other aircraft on adjacent OTRs.
f.Clear an aircraft to change altitude on a route if
noncomposite separation exists between that aircraft
and others operating on that route regardless of other
aircraft operating on adjacent routes in the system.
Pilot’s discretion climbs and descents are notauthorized when applying composite separation.
NOTE−
Although composite separation is not applied betweenaircraft on different tracks at FL 280 and FL 290, this
paragraph applies to climbs and descents between FL 280and altitudes within the composite altitude stratum
(FL 300 and above).
8−9−8. PROCEDURES FOR WEATHER
DEVIATIONS AND OTHER
CONTINGENCIES IN OCEANICCONTROLLED AIRSPACE
Aircraft must request an ATC clearance to deviate.
Since aircraft will not fly into known areas of
weather, weather deviation requests should take
priority over routine requests. If there is no traffic inthe horizontal dimension, ATC must issue clearance
to deviate from track; or if there is conflicting traffic
in the horizontal dimension, ATC separates aircraftby establishing vertical separation. If there is
conflicting traffic and ATC is unable to establish
approved separation, ATC must:
a.Advise the pilot unable to issue clearance for
requested deviation;
b.Advise the pilot of conflicting traffic; and
c.Request pilot’s intentions.
PHRASEOLOGY −
UNABLE (requested deviation), TRAFFIC IS (call sign,position, altitude, direction), SAY INTENTIONS.
NOTE−
1.The pilot will advise ATC of intentions by the most
expeditious means available.
2.In the event that pilot/controller communications
cannot be established or a revised AT clearance is not
available, pilots will follow the procedures outlined in the
Regional Supplementary Pr ocedur es, ICAO Doc 7030 and
Chart Supplements.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
8−10−1 North American ICAO RegionSection 10. North American ICAO Region
8−10−1. APPLICATION
Provide air traffic control services in the North
American ICAO Region with the procedures andminima contained in this section.
8−10−2. VERTICAL SEPARATION
Provide vertical separation in accordance with:
a.Chapter 4, IFR, Section 5, Altitude Assignment
and Verification; and
b.Facility directives depicting the transition
between flight levels and metric altitudes.
8−10−3. LONGITUDINAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 3, L ongitudinal Separation,
apply the following:
a.Minima based on time:
1.15 minutes between turbojet aircraft.
2.The prescribed minima in accordance with
Paragraph 8 −3−3, Mach Number Technique.
3.20 minutes between other aircraft.
b.Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
1.The ITP climb or descent has been requested
by the pilot;
2.The aircraft identification of each reference
aircraft in the ITP request exactly matches the Item 7
- aircraft identification of the corresponding aircraft’s
filed flight plan;
3.The reported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or more;
4.Both the ITP aircraft and reference aircraft
are either on:
(a)same identical tracks and any turn at a
waypoint shall be limited to less than 45 degrees; or(b)same tracks with no turns permitted that
degrade required separation during the ITP.
NOTE−
Same identical tracks are where the angular difference is
zero degrees.
5.No speed or route change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
6.The altitude difference between the ITP
aircraft and any reference aircraft shall be 2000 ft or
less;
7.No instruction to amend speed, altitude or
route shall be issued to any reference aircraft until the
ITP climb or descent is completed;
8.The maximum closing speed between the ITP
aircraft and each reference aircraft shall be Mach
0.06; and
9.The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
NOTE−
ATOP is designed to check for the above criteria prior to
allowing the minima to be provided.
c.Minima based on distance using Automatic
Dependent Surveillance – Contract (ADS-C) in the
Anchorage Oceanic and Anchorage ContinentalCTAs only:
NOTE−
The minima described in this paragraph are not applicable
within airspace in the Anchorage Arctic CTA.
1.Apply the minima as specified in TBL 8-10-1
between aircraft on the same track within airspace in
the Anchorage Oceanic and Anchorage Continental
CTAs designated for Required Navigation
Performance (RNP), provided:
(a)Direct controller/pilot communication via
voice or Controller Pil ot Data Link Communications
(CPDLC) is established, and
(b)The required ADS-C periodic reports are
maintained and monitored by an automated flightdata processor (for example, Ocean21).5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
8−10−2 North American ICAO RegionTBL 8−10−1
ADS−C Criteria
Minima RNP Maximum ADS −C
Periodic Reporting
Interval
50 NM 10 27 minutes
50 NM 4 32 minutes
30 NM 4 10 minutes
2.Aircraft on reciprocal tracks in the
Anchorage Oceanic and Anchorage ContinentalCTAs may be cleared to climb or descend to or
through the altitude(s) occupied by another aircraft
provided:
(a)(a) An ADS-C position report on at least
one of the aircraft has been received beyond the
passing point, and
(b)(b) The aircraft have passed each other by
the applicable separation minimum.
NOTE−
Ocean21 has been designed to check for the above criteria
prior to allowing the minima to be provided.
3.When an ADS-C periodic or waypoint
change event report is overdue by 3 minutes , thecontroller must take action to obtain an ADS-C
report.
4.If no report is received within 6 minutes of the
time the original report was due, the controller musttake action to apply another form of separation.
8−10−4. LATERAL SEPARATION
In accordance with Chapter 8, Offshore/ Oceanic
Procedures, Section 4, Lateral Separation, apply the
following:
a.50 NM to RNP−10 approved aircraft within
areas where RNP −10 separation and procedures are
authorized,
b.30 NM to RNP−4 approved aircraft operating
within the Anchorage Oceanic CTA and AnchorageContinental CTA when direct controller/pilot
communications, via voice or Controller Pilot Data
Link Communications (CPDLC), and the required
ADS−C contracts are maintained and monitored by
an automated flight data processor (for example,Ocean21).
NOTE−
The minimum described in subparagraph b is notapplicable within airspace in the Anchorage Arctic CTA.
c.90 NM to aircraft not covered by subparagraphs
a or b.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
9−1−1 GeneralChapter 9. Special Flights
Section 1. General
9−1−1. GENERAL
Provide aircraft engaged in the flight inspection of
NA V AIDs with maximum assistance. Unless other-
wise agreed to, maintain direct contact with the pilotand exchange information regarding known traffic in
the area and his/her intentions.
NOTE−
1.Many flight inspections are accomplished using
automatic recording equipment, and an uninterruptedflight is necessary for successful completion of the mission.
The workload for the limited number of aircraft engaged in
these activities requires strict adherence to a schedule.
2.Flight inspection operations which require special
participation of ground personnel, specific communica-
tions, or radar operation capabilities are considered to
require special handling. Th ese flights are coordinated
with appropriate facilities before departure.
REFERENCE −
F AAO 8200.1, United States Standard Flight Inspection Manual.
F AAO 8240.41, Flight Inspection/Air T raffic On−Site Coor dination
Requirements.
9−1−2. SPECIAL HANDLING
a.Clear the aircraft according to pilot request as
soon as practicable. Do not ask the pilot to deviate
from his/her planned action except to preclude an
emergency situation.
REFERENCE −
F AAO 8240.41, Flight Inspection/Air T raffic On−Site Coor dination
Requirements, Appendix 1, describes certain flight inspection
maneuvers in detail.
b.Issue radar advisories to the flight inspection
aircraft where adequate coverage exists and to the
extent permitted by workload.
c.Suggest flight path adjustments, as required, for
any aircraft which will enter or penetrate an area in
which a flight inspection function is being performed.
d.Provide special handling, as required, to FAA
aircraft conducting flight inspections using the call
sign “Flight Check.” The call sign “Flight Check (Nr)
recorded” indicates automated flight inspections are
in progress in terminal areas.NOTE−
1.FAA flight inspection aircraft will file flight plans using
the call sign “FLIGHT CHECK” during flight inspections
or when inbound to conduct flight inspections. Flight plan
remarks may indicate type NAVAID inspection to be
accomplished; e.g. “FC OKC P .”
2.Authorized non-F AA Service Providers conducting
Flight Validation activities use the call sign “FLIGHT
VAL.” Although these activities are similar to Flight
Inspection activities, no additional priority is granted with
this call sign.
9−1−3. FLIGHT CHECK AIRCRAFT
a.Provide special handling, as required, to
expedite flight inspection of NA V AIDs and RADAR
by flight check aircraft.
NOTE−
Certain flight inspection maneuvers require operations inclose proximity to the surface. These maneuvers can onlybe performed during daylight visual meteorological
conditions. Preplanned automatic flight places the
following limitations on the capability of the pilot to adhere
to normal ATC clearances:
1.Route of flight − orbital from 6 nautical miles to a
maximum of 40 nautical miles from the facility depending
on the type of inspection. During commissioning flight
checks all SIDs, STARs, airways, DME fixes, andapproaches must be flown.
2.Altitude assignment − from 1,000 feet above the
antenna site up to the minimum en route altitude (MEA).
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO 8240.41, Flight Inspection/Air T raffic On−Site Coor dination
Requirements, Appendix 1, describes certain flight inspection
maneuvers in detail.
b.Avoid changes in the route or altitude from that
filed by the pilot in the initial flight plan.
c.Do not impose air traffic control delays in the
flight except to preclude emergency situations.
d.Do not change the previously assigned discrete
beacon code of special radar accuracy flight check
aircraft.
REFERENCE −
FAAO JO 7210.3, Para 7 −1−2, Special Radar Accuracy Checks.
FAAO JO 7210.3, Para 10 −5−4, ASR Performance Checks.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
9−2−1 Special OperationsSection 2. Special Operations
9−2−1. AIRCRAFT CARRYING
DANGEROUS MATERIALS
a.Provide the following special handling to
military aircraft or military contracted aircraft
carrying dangerous materials when:
1.The words “dangerous cargo,” or “inert
devices,” or both are contained in the remarks section
of the filed flight plan, or
NOTE−
1.Certain types of military flights carrying dangerous
materials require strict adherence to military regulations
and flight planning along carefully selected routes. These
flights must avoid heavily populated areas.
2.“Inert devices” are devices containing no dangerous
materials but closely resembl ing nuclear or explosive items
that are classified as dangerous and could be easily
mistaken for their dangerous counterparts.
2.The pilot uses these words in radio
communication.
b.If it becomes necessary to issue a clearance to
amend the route/altitude, advise the pilot:
1.Of the proposed change, and
2.The amount of delay to expect if it is
necessary to maintain the present route/altitude.
c.When it becomes necessary for the pilot to
refuse a clearance amending his/her route/altitude,
he/she will advise if the traffic delay is acceptable or
if an alternate route/altitude is desired. In such cases,offer all possible assistance.
d.When the aircraft is provided an en route
descent, do not vector the aircraft from the plannedroute unless the pilot concurs.
e.Use special patterns and routings in areas where
they have been developed for these flights. If special
patterns and routings have not been developed,
employ normal procedures.
9−2−2. CELESTIAL NAVIGATION TRAINING
EN ROUTE
a.Approve flight plans specifying celestial
navigation only when it is requested for USAF orUSN aircraft.NOTE−
An ATC clearance must be obtained by the pilot beforediscontinuing conventional navigation to begin celestialnavigation training. The pilot will advise when discontinu-
ing celestial navigation and resuming conventional
navigation. Celestial navigation training will be conducted
within 30 NM of the route centerline specified in theen route clearance unless otherwise authorized by ATC.During celestial navigation training, the pilot will advise
ATC before initiating any heading changes which exceed
20 degrees.
b.Within conterminous U.S. airspace, limit
celestial navigation training to tra nsponder-equipped
aircraft within areas of ARTCC radar coverage.
c.Prior to control transfer, ensure that the
receiving controller is informed of the nature of the
celestial navigation training leg.
REFERENCE −
F AAO JO 7110.65, Para 2 −2−6, IFR Flight Progress Data.
9−2−3. DEPARTMENT OF ENERGY (DOE)
SPECIAL FLIGHTS
a.Provide notification of possible route or altitude
changes as far in advance as possible for “RAC”flights. The pilot will indicate if the proposed change
is acceptable or if alternate routing or altitude will be
requested.
NOTE−
DOE contracts for civil pilots to operate public aircraft totransport radioactive or high explosive materials withinthe conterminous U.S. These flights operate on an IFRflight plan but principally during daylight hours and VFR
conditions. These flights require flight along carefully
selected routes and, in some instances, pilots will refuseclearances that require reroute or altitude changes thatwould derogate their objective.
b.EN ROUTE. Approve pilot requests to leave
center frequency for operational purposes as traffic
conditions permit.
c.Notify a supervisor in the event any of the
following occurs with “RAC” aircraft:
1.Loss of radio contact.
2.Loss of radar contact.
3.The flight is overdue at the destination.
JO 7110.65W 12/10/15
9−2−2 Special Operationsd.If you receive information that a “RAC” aircraft
is involved in an accident, secure as much
information as possible, particularly with respect to
location, and immediately notify the ARTCC
supervisory traffic management coordinator −in−
charge.
NOTE−
There is a possibility of an explosive or radiation hazard of
an “RAC” aircraft involved in an accident.
9−2−4. EXPERIMENTAL AIRCRAFT
OPERATIONS
a.When notified that an experimental aircraft
requires special handling:
NOTE−
14 CFR Section 91.319(d)(3) requires that each personoperating an air craft with an experimental certificate must
notify the control tower of the experimental nature of the
aircraft when operating into or out of airports with
operating control towers.
1.Clear the aircraft according to pilot requests
as traffic permits and if not contrary to ATCprocedures.
2.Once approved, do not ask the pilot to deviate
from a planned action except to preclude an
emergency situation.
b.At locations where volume or complexity of
experimental aircraft operations warrant, a letter of
agreement may be consummated between the facility
and operator.
9−2−5. FAA RESEARCH AND
DEVELOPMENT FLIGHTS
When coordinated in advance and traffic permits,
approve requests for special flight procedures from
aircraft participating in FAA research and develop-
ment test activities. These special procedures must be
applied to participating aircraft/vehicles.
NOTE−
Special flight procedures for F AA research and develop-ment test activities must be approved by the facility air
traffic manager prior to their use.
REFERENCE −
FAAO JO 7210.3, Para 5 −2−4, Research and Development Flights.9−2−6. FLYNET
Provide expeditious handling for U.S. Government,
civil or military aircraft using the code name“FLYNET.” Relay the code name as an element in the
remarks position of the flight plan.
NOTE−
The code name “FLYNET” indicates that an aircraft istransporting a nuclear emergency team or a disastercontrol team to the location of a potential or actual nuclear
accident or an accident involving chemical agents or
hazardous materials. It is in the public interest that they
reach their destination as rapidly as possible.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7610.4, Para 12 −4−1, “FLYNET” Flights, Nuclear
Emergency Teams.
9−2−7. IFR MILITARY TRAINING ROUTES
a.Except for aircraft operating in the same altitude
reservation, clear aircraft into an MTR provided
separation w ill be applied between successive aircraft
unless otherwise covered in a letter of agreement
between the military scheduling activity and the
concerned ATC facility.
PHRASEOLOGY −
CLEARED INTO IR (designator).MAINTAIN (altitude),
or
MAINTAIN IR (designator) ALTITUDE(S),
or
MAINTAIN AT OR BELOW (altitude),
or
CRUISE (altitude),
and if required,CROSS (fix) AT OR LATER THAN (time).
b.Unless otherwise covered in a letter of
agreement between the military scheduling activityand the concerned FAA facility, clear aircraft to exit
an MTR.
PHRASEOLOGY −
CLEARED TO (destination/clearance limit) FROM IR
(designator/exit fix) VIA (route).MAINTAIN (altitude).
JO 7110.65W 12/10/15
9−2−3 Special Operationsc.If the provisions of subpara a above cannot be
accomplished, MTRs may be designated for MARSA
operations. To preclude an inadvertent compromise
of MARSA standards by ATC, appropriate MARSA
application for such routes must be covered in a letter
of agreement with the military scheduling activity.
Establish separation between aircraft as soon as
practicable after operation on the designatedMARSA route is ended.
NOTE−
For designated MARSA routes, the military assumesresponsibility for separation for MTR aircraft that havepassed the primary/alternate entry fix until separation is
established by ATC after operations on the MARSA route
are completed.
d.The lateral airspace to be protected along an
MTR is the designated width of the route.
e.Prior to an aircraft entering an MTR, request the
pilot’s estimate for the route’s exit/alternate exit fix,
the pilot’s requested altitude after exiting and, if
applicable, the number of reentries on a StrategicTraining Range (STR).
PHRASEOLOGY −
(Call sign) VERIFY YOUR EXIT FIX ESTIMATE ANDREQUESTED ALTITUDE AFTER EXIT,
and if applicable,
THE NUMBER OF REENTRIES.
f.Forward estimates for exit/alternate exit fixes,
requested altitude after exit, and, if applicable, the
number of reentries on the STR.
g.Apply the procedures of para 6 −1−2, Nonre-
ceipt of Position Report, based upon the pilot’s
estimate for the route exit fix.
h.Clearance may be issued to amend or restrict
operations on a route for A TC considerations. Where
a route has been designated MARSA in accordance
with subpara c, ATC must not amend or restrictoperations in such a manner as to compromise
MARSA provisions.
NOTE−
When MARSA is provided through route scheduling andcircumstances prevent the pilot from entering the route
within established time limits, it must be the responsibility
of the pilot to inform the ATC facility and advise his/herintentions.i.If an aircraft on an IR experiences a two-way
radio communications failure and you are unable to
determine if the aircraft is proceeding VFR in
accordance with 14 CFR Section 91.185(b) or the
aircraft has not been positively radar identified:
1.Provide separation to the destination airport
based on the aircraft complying with the following:
(a)Maintain to the exit/alternate exit fix the
higher of the following altitudes:
(1)The minimum IFR altitude for each of
the remaining route segment(s) remaining on the
route.
(2)The highest altitude assigned in the last
ATC clearance.
(b)Depart the exit/alternate exit fix at the
appropriate altitude specified in subpara (a) above,
then climb/descend to the altitude filed in the flight
plan for the remainder of the flight, or
NOTE−
In the event of a two-way communications failure, ATC will
be based on the following anticipated pilot action at the exit
fix. Unless otherwise covered in a letter of agreement, and
if the pilot is unable to comply with the VFR provisions of14 CFR Section 91.185/FLIP IFR Supplement, the pilotwill exercise his/her emergency authority, squawk
transponder Code 7700 , depart the exit/alternate exit fix
and climb/descend (continuing to squawk 7700) to the
altitude filed in the flight plan. Subsequent transponderoperations will be in accordance with para 10 −4−4,
Communications Failure. Air traffic controller action from
the exit fix is as prescribed in para 10 −1−1, Emergency
Determinations.
(c)Proceed in accordance with the lost
communication procedure contained in letters of
agreement.
2.Continue to monitor the last ATC assigned
discrete code.
NOTE−
Pilots who experience a two-way radio failure will adjust
their transponder to Code 7700 during climb/descent to
altitude fi led for the next leg of the flight plan; then change
to Code 7600 for a period of 15 minutes. At the end of each
15−minute period, he/she will squawk 7700 for a period of
1 minute; all other times he/she will squawk 7600.
j.Impose delays, if needed, to eliminate conflict
with nonparticipating IFR aircraft when necessary to
preclude denial of IR usage. Advise the pilot of the
expected length and reason for delay.
JO 7110.65W 12/10/15
9−2−4 Special Operations9−2−8. INTERCEPTOR OPERATIONS
Provide maximum assistance to expedite the
movement of interceptor aircraft on active air defense
(scrambles) missions until the unknown aircraft is
identified in accordance with the policies andprocedures published in FAAO JO 7610.4, Special
Operations.
NOTE−
The F AA and the military have mutually agreed to theimplementation of policies and procedures for control of
air defense interceptor operations. Effective coordination
and cooperation between F AA and the military at all levels
are essential if policy objectives are to be met.
a.The ADCF initiating the SCRAMBLE must
identify the mission as an active air defense mission.
b.ATC services must be used for active air defense
missions insofar as the circumstances and situation
permits.
c.Upon request, the ATC facility must expedite
transfer of the control jurisdiction of the interceptors
to the requesting ADCF.
9−2−9. SPECIAL INTEREST SITES
a.Immediately relay any reports or information
regarding unusual aircraft activities in the vicinity of
special interest sites such as nuclear power plants,power plants, dams, refineries, etc., to supervisory/
CIC personnel.
NOTE−
Air traffic controllers have no responsibilities to monitor or
observe aircraft in the vicinity of special interest sitesunless directed by supervisory/CIC personnel.
9−2−10. WASHINGTON, DC, SPECIAL
FLIGHT RULES AREA (DC SFRA)/ATCSECURITY SERVICES
Provide ATC security serv ices at locations where
procedures are required for tracking aircraft in
security services airspace. ATC security services aredesigned to support the national security mission of
the FAA and other agencies. Two −way radio
communications, flight planning, and an operational
transponder on an assigned code are required for
operations in the designated area.
a.When the assigned code is observed, advise the
aircraft to proceed on course/as requested but toremain outside of Class B, C, and/or D airspace as
appropriate.
PHRASEOLOGY −
(ACID) TRANSPONDER OBSERVED PROCEED ONCOURSE/AS REQUESTED; REMAIN OUTSIDE (class)AIRSP ACE.
1.Maintain continuous security tracking of
VFR aircraft operating in the designated area to assistsecurity forces in situational awareness. Immediately
report all instances of loss of radio communication or
the inability to conduct security tracking of an aircraft
to the front line manager (FLM)/CIC and wait for
instructions.
2.Basic separation services to aircraft, for
example, IFR, SVFR, Class B, Class C, TRSA, do not
apply to ATC security tracking.
3.Aircraft with operating transponders, but
without operating Mode C (altitude), require specific
authorization from ATC to operate in the SFRA. ATC
must coordinate with the Domestic Events Network(DEN) before approval.
4.Aircraft flying too low for radar coverage
must be instructed to report landing or exiting the
SFRA. Keep flight progress strips on these aircraft
until pilot reports landing or exiting the SFRA. If aflight progress strip does not exist for the aircraft,
record the call sign, transponder code, entry point (for
example, north, northeast, east), and time of entryinto the SFRA.
PHRASEOLOGY −
(Call sign), REPORT LANDING OR LEAVING THE
SFRA.
5.United States military, law enforcement, and
aeromedical flights are exempt from filing flight
plans.
b.Establishing two −way Communications.
1.Pilots must establish two −way radio
communications with ATC prior to entering the
security service area. Responding to a radio call with,
“(a/c call sign) standby,” establishes radiocommunications and the pilot may enter the area,
provided all other security requirements have been
satisfied.
2.Aircraft requesting security services should
not normally be held. However, if holding isnecessary or workload/traffic conditions prevent
immediate provision of ATC security services,
inform the pilot to remain outside the designated area
JO 7110.65W 12/10/15
9−2−5 Special Operationsuntil conditions permit the provision of ATC security
services. Inform the pilot of the expected length of
delay.
PHRASEOLOGY −
(A/C call sign) REMAIN OUTSIDE OF THE (location)
AND STANDBY. EXPECT (time) MINUTES DELAY.
c.Termination of Service.
1.If the aircraft is not landing within the
designated area, provide security services until the
aircraft exits the area and then advise the aircraft to
squawk VFR and that frequency change is approved.
PHRASEOLOGY −
SQUAWK VFR, FREQUENCY CHANGE APPROVED.
or CONTACT (facility identification).
2.When an aircraft is landing at an airport inside
the area, instruct the pilot to remain on the assigned
transponder code until after landing.
PHRASEOLOGY −
(ACID) REMAIN ON YOUR ASSIGNED TRANSPONDER
CODE UNTIL YOU LAND, FREQUENCY CHANGE
APPROVED.
3.Using approved handoff functionality, trans-
fer the data blocks of all security tracked aircraft that
will enter another sector/position for coordination of
aircraft information/location. Upon acceptance of the
transferred information, instruct the pilot to contact
the next sector/positions’ frequency.
9−2−11. SECURITY NOTICE (SECNOT)
Upon receiving notification of a SECNOT, the
controller must forward all information on the subject
aircraft to the FLM/CIC. If information is not known,
broadcast call sign on all frequencies and advise the
FLM/CIC of the response.
REFERENCE −
P/CG Term − Security Notice.
F AAO JO 7210.3, Chapter 19, Section 9, Security Notice (SECNOT).
9−2−12. LAW ENFORCEMENT
OPERATIONS BY CIVIL AND MILITARYORGANIZATIONS
a.Law enforcement alerts.
1.Aircraft lookouts must not be distributed
outside the FAA.REFERENCE −
F AAO 1600.29, Law Enforcement Alert Message System.F AAO JO 7210.3, Para 2 −7−7, Cooperation W ith Law Enforcement
Agencies.
2.Stolen aircraft alerts, including stolen aircraft
summaries, may be distributed outside the FAA to:
airport offices, air carriers, fixed base operators, and
law enforcement agencies.
3.Upon receipt of know ledge concerning an
aircraft for which a current law enforcement alert
message is held, do the following:
(a)Forward any information on the aircraft to
El Paso Intelligence Center (EPIC) and the requester
when specified in the message.
(b)Immediately notify the cognizant
Transportation Security Administration office by the
most rapid means.
(c)DO NOT TAKE ANY OTHER ACTION
AFFECTING THE AIRCRAFT, CARGO, CREW,
OR PASSENGERS NOT NORMALLY RELATEDTO JOB RESPONSIBILITIES.
b.Special law enforcement operations.
1.Special law enforcement operations include
inflight identification, surveillance, interdiction andpursuit activities performed in accordance with
official civil and/or military mission responsibilities.
2.To facilitate accomplishment of these special
missions, exemptions from specified parts of Title 14
of the Code of Federal Regulations have been granted
to designated departments and agencies. However, itis each organization’s responsibility to apprise ATC
of their intent to operate under an authorized
exemption before initiating actual operations.
REFERENCE −
FAAO JO 7210.3, Para 18 −3−1, Authorizations and Exemptions from
Title 14, Code of Federal Regulations (14 CFR).
3.Additionally, some departments and agencies
that perform special missi ons have been assigned
coded identifiers to permit them to apprise ATC of
ongoing mission activities and solicit special air
traffic assistance.
REFERENCE −
F AAO 7110.67, Special Aircraft Operations by Law
Enforcement/Military Organizations.
NOTE−
As specified in para 2 −1−4, Operational Priority, priority
of handling for aircraft operating with coded identifiers
will be the same as that afforded to SAR air craft performing
a SAR mission.
JO 7110.65W 12/10/15
9−2−6 Special Operationsc.Assistance to law enforcement aircraft opera-
tions.
1.Provide the maximum assistance possible to
law enforcement aircraft, when requested, in helping
them locate suspect aircraft.
2.Communicate with law enforcement aircraft,
when possible and if requested, on a frequency notpaired with your normal communications frequen-
cies.
3.Do not allow assistance to law enforcement
aircraft to violate any required separation minima.
4.Do not assist VFR law enforcement aircraft in
any way that will create a situation which, in your
judgment, places the aircraft in unsafe proximity to
terrain or other aircraft.
9−2−13. MILITARY AERIAL REFUELING
Authorize aircraft to conduct aerial refueling along
published or special tracks at their flight plan altitude,
unless otherwise requested.
PHRASEOLOGY −
CLEARED TO CONDUCT REFUELING ALONG(number) TRACK,
or
FROM (fix) TO (fix) ,
and
MAINTAIN REFUELING LEVEL (altitude),
or
MAINTAIN (altitude),
or
COMMENCING AT (altitude), DESCENDING TO
(altitude).
NOTE−
1.During aerial r efueling, tanker aircraft are r esponsible
for receiver air craft communication with A TC and for their
navigation along the track.
2.Aerial refueling airspace is not sterilized airspace and
other air craft may transit this airspace pr ovided vertical or
lateral separation is provided from refueling aircraft.
3.MARSA begins between the tanker and receiver when
the tanker and receiver(s) have entered the air refuelingairspace and the tanker advises ATC that he/she is
accepting MARSA.
4.MARSA ends between the tanker and r eceiver when the
tanker advises ATC that the tanker and r eceiver aircraft are
vertically positioned within the air refueling airspace and
ATC advises MARSA is terminated.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−1 1, Use of MARSA.
F AAO JO 7110.65, Para 5 −5−8, Additional Separation for Formation
Flights.
F AAO JO 7610.4, Chapter 10, Aerial Refueling.
a.Provide radar assistance to the rendezvous for
participating aircraft:
1.When requested, and
2.By providing vertical separation prior to
MARSA declaration.
b.Do not request receiver aircraft that have been
cleared to conduct air refueling and have departed the
ARIP to:
1.Make code changes when less than 5 miles
from the tanker.
2.Squawk standby when less than 1 mile or
more than 3 miles from the tanker.
NOTE−
Requests for receiver aircraft to make code changes during
air refueling diverts the receiver pilot’ s attention during acritical phase of flight.
c.When issuing an initial air refueling clearance,
you may request a receiver to squawk standby when
the receiver reaches a point 3 miles from the tanker.
NOTE−
1.Receiver aircraft will squawk normal when separation
from the tanker is greater than 3 miles.
2.Once rendezvous is completed, heading and altitude
assignments may be made with the tanker concurr ence with
MARSA remaining in effect.
3.Upon rendezvous completion, the tanker must keep
receiver air craft within 3 miles of the tanker until MARSA
is terminated.
d.After MARSA has been declared, you should
avoid issuing course or altitude changes prior torendezvous.
NOTE−
Altitude or course changes issued will automatically voidMARSA.
e.Do not use the altitude vacated during the
refueling operation until the refueling aircraft has
reported reaching the next IFR altitude.
JO 7110.65W 12/10/15
9−2−7 Special OperationsREFERENCE −
F AAO JO 7110.65, Para 6 −6−2, Exceptions.
f.Approve requests by the tanker pilot for vectors
or alternative routes or altitudes as follows:
1.Furnish vectors or alternative altitudes at any
time.
2.Furnish nonradar routes only after the
refueling aircraft have passed the ARCP.
NOTE−
1.To meet a training requirement that aerial refueling be
accomplished in a nonradar environment, the military has
requested that vectors be furnished only upon request.
2.The tanker commander is responsible for coordinating
all inflight requests with other aircraft in the refueling
mission before submission of such requests to the center.
3.Normally, aircraft conducting aerial refueling opera-
tions will utilize at least three consecutive altitudes.
g.Unless a vector or alternative route has been
furnished, clear the aircraft to depart the refueling
track at a navigational reference point or egress fix.
h.Request an aircraft to report the ARIP, ARCP, or
egress fix as necessary.
PHRASEOLOGY −
REPORT:
A−R−I−P,
or
A−R−C−P,
or
EGRESS FIX.
i.Expect the following procedures in addition to
those required by the appropriate parts of Title 14 ofthe Code of Federal Regulations in the event of
two-way communications failure:
1.The tanker will depart the track from the
highest altitude in the block.
2.The receiver will depart the track from the
lowest altitude in the block.
3.Aircraft will squawk 7600 for at least
2 minutes prior to departing the track.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−14, Military Operations Above FL 600.9−2−14. MILITARY OPERATIONS ABOVE
FL 600
Control aircraft operating above FL 600 using the
following procedures:
a.Flight plans involving supersonic flight are
required 16 hours in advance of proposed departure
times for processing and approval by the ARTCCs
concerned. The originating ARTCC, where the flight
plan is first filed, may waive the 16 −hour advance
filing requirement.
b.The route of flight must be defined by at least
one high altitude fix within each ARTCC areawithout regard to the distance between fixes.
Additionally, the entry and exit points of turns of
90 degrees or more will be designated.
c.Elapsed times from takeoff to the first fix in each
ARTCC area must be included in the route of flight.
d.The ARTCC which originates the flight plan
must forward departure times to all ARTCCs
responsible for processing the flight plan.
e.Approval of the flight plan indicates approval of
both route and flight levels (if stated) includingoperations below FL 600 (aerial refueling).
PHRASEOLOGY −
CLEARED AS FILED VIA ROUTE AND FLIGHT
LEVELS.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−13, Military Aerial Refueling.
f.Separation. Use the following as minima in lieu
of the corresponding type of separation prescribed in:
NOTE−
The primary method described to provide separationbetween two supersonic aircraft is to descend the aircraftat the lower FL and provide vertical separation since theaircraft at the higher FL may not be able to climb rapidly
enough to establish the required separation. Another
aspect which should be considered is that supersonicaircraft during turns, either programmed or as the result of
vectors, will lose a few thousand feet. V ectoring supersonic
aircraft seri ously affects the range and mission objectives.
Radar separation is the preferred method of separating a
subsonic aircraft both from another subsonic aircraft orfrom a supersonic aircraft.
1.Para 4−5−1, Vertical Separation Minima:
5,000 feet.
JO 7110.65W 12/10/15
9−2−8 Special OperationsNOTE−
1.The security requirements of the military services
preclude the transmission of actual altitude information on
the air/ground or landline circuits. A classified document
detailing the plan for ascertaining altitude codes for the
day should be readily available to the controllers at theirpositions of operation.
2.Pilots will report their altitude, using the coded plan,
and intended flight profile on initial contact with each
ARTCC.
2.Para 6−5−4, Minima Along Other Than
Established Airways or Routes: Protect the airspace
25 miles either side of the route centerline. For turns
by supersonic aircraft, protect the airspace 75 mileson the overflown side and 25 miles on the other side.
For turns by subsonic aircraft, protect the airspace
34 miles on the overflown side and 25 miles on theother side.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−3, Abbreviated Departure Clearance.
9−2−15. MILITARY SPECIAL USE
FREQUENCIES
a.Assign special use frequency to:
NOTE−
Special use fr equencies are assigned to ARTCCs in such a
manner that adjacent ARTCCs will not have the samefrequency. They are to be used within the ARTCC areajurisdiction from the established FL base of the highaltitude sectors and above. Each high altitude sector
should have the capability to use the special use fr equency
on a shared basis.
1.USAF, U.S. Navy, and Air National Guard
(ANG) single-pilot jet aircraft formations operatingat night or in instrument weather conditions.
Formations of five or more USAF aircraft deploying
either to a continental U.S. staging base or nonstop to
an overseas location are authorized to use special use
frequencies at any time. Normally these deployments
will be conducted within an altitude reservation.
2.U−2 and B−57 (pressure suit flights) aircraft
at all altitudes/FLs except where terminal operations
require the assignment of other frequencies.NOTE−
Aerial r efueling operations may r equire that aircraft leave
the special use frequency for communications with thetanker. This will occur when the r eceiver is approximately
200 miles from the ARCP . The tanker aircraft will remain
on the ARTCC assigned frequency and will relayclearances to the receiver as r equired. An alternate means
of communications between the tanker and receiver is HFradio.
3.All aircraft during supersonic flight.
NOTE−
Pilots are expected to r equest assignment of the special use
frequency in the remarks section of the flight plan or before
entering supersonic flight. B −57 aircraft engaged in
pressure suit operations will use the static call sign KITEand flights will normally be conducted from Dover,Eielson, Ellington, Hickman, Howard, Kirtland, andMcClellan Air Force Bases.
4.E−3A AWACS mission crews when opera-
tions are being conducted as an MRU in accordance
with appropriate letters of agreement.
b.The special use frequency may be assigned as
“backup” for the high-altitude sector when directcommunications are essential because of a potential
emergency control situation.
c.Do not assign the special use frequency to the
aircraft in subpara a1 above, when they will operate
in airspace assigned for special military operations.
9−2−16. AVOIDANCE OF AREAS OF
NUCLEAR RADIATION
a.Advise pilots whenever their proposed flight
path will traverse a reported or forecasted area of
hazardous radiation and reroute the aircraft whenrequested by the pilot.
REFERENCE −
FAAO JO 7610.4, Para 4 −4−4, Avoidance of Hazardous Radiation
Areas.
b.Inform pilots when an airfield of intended
landing lies within a reported or forecasted area ofhazardous radiation and request the pilot to advise
his/her intentions.
9−2−17. SAMP
Provide special handling to U.S. Government and
military aircraft engaged in aerial sampling missions
(atmosphere sampling for nuclear, chemical, or
JO 7110.65W 12/10/15
9−2−9 Special Operationshazardous material contamination). Honor inflight
clearance requests for altitude and route changes to
the maximum extent possible. Other IFR aircraft may
be recleared so that requests by SAMPLER aircraft
are honored. Separation standards as outlined in thisorder must be applied in all cases.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
F AAO JO 7110.65, Para 2 −4−20, Aircraft Identification.
FAAO JO 7610.4, Para 4 −4−4, Avoidance of Hazardous Radiation
Areas.
9−2−18. AWACS/NORAD SPECIAL
FLIGHTS
Do not delay E −3 AWACS aircraft identified as
“AWACS/NORAD Special” flights. The following
control actions are acceptable while expediting these
aircraft to the destination orbit.
a.En route altitude changes +/– 2,000 feet from the
requested flight level.
b.Radar vectors or minor route changes that do
not impede progress towards the destination orbit.
NOTE−
NORAD has a r equirement to position E −3 AWACS air craft
at selected locations on a time-critical basis. To the extent
possible these flights will utilize routes to the destination
orbit that have been pr ecoor dinated with the impacted ATC
facilities. To identify these flights, the words “AWACS/NORAD SPECIAL” will be included as the first item in the
remarks section of the flight plan.
9−2−19. WEATHER RECONNAISSANCE
FLIGHTS
TEAL and NOAA mission aircraft fly reconnais-
sance flights to gather meteorological data on winter
storms, (NWSOP missions), hurricanes and tropical
cyclones (NHOP missions). The routes and timing of
these flights are determined by movement of the
storm areas and not by traffic flows.
a.When a dropsonde release time is received from
a TEAL or NOAA mission aircraft, workload and
priorities permitting, controllers must advise the
mission aircraft of any traffic estimated to passthrough the area of the drop at altitudes below that of
the mission aircraft. This traffic advisory must
include:
1.Altitude.
2.Direction of flight.3.ETA at the point closest to drop area (or at the
fix/intersection where drop will occur).
NOTE−
A dropsonde is a 14 −inch long cardboard cylinder about
2.75 inches in diameter, that weighs approximately14 ounces (400 grams), and has a parachute attached.
When released from the aircraft it will fall at a rate of
approximately 2,500 feet per minute. Controllers shouldrecognize that a dropsonde released at FL 310 will be afactor for traffic at FL 210 four minutes later. It is theaircraft commanders responsibility to delay release of
dropsondes if traffic is a factor. Aircraft commanders will
delay release of dropsondes based solely upon traffic asissued by ATC.
b.When advised that an airborne TEAL or NOAA
aircraft is requesting a clearance via CARCAH, issue
the clearance in accordance with Chapter 4, IFR,Section 2, Clearances.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−1, Clearance Items.
F AAO JO 7110.65, Para 4 −2−2, Clearance Prefix.
F AAO JO 7110.65, Para 4 −2−3, Delivery Instructions.
c.If a TEAL or NOAA mission aircraft must be
contacted but is out of VHF, UHF, and HF radiorange, advise the supervisory traffic management
coordinator −in−charge.
REFERENCE −
FAAO JO 7210.3, Para 5 −3−6, Weather Reconnaissance Flights.
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.
9−2−20. EVASIVE ACTION MANEUVER
Approve a pilot request to conduct an evasive action
maneuver only on the basis of a permissible trafficsituation. Specify the following items, as necessary,
when issuing approval:
NOTE−
The “evasive action” maneuver is performed by abomber/fighter bomber aircraft at or above FL 250 along
a 60 NM long segment of the flight plan route overlying a
RBS or other site and includes:
1.Flying a zigzag pattern on both the left and right side
of the flight plan route centerline. Altitude deviations aremade in conjunction with the lateral maneuvering.
2.Lateral deviations from the route centerline will not
normally exceed 12 miles. Altitude variations must not
exceed plus or minus 1,000 feet of the assigned flight level;
i.e., confined within a 2,000 foot block.
a.Specific route segment on which the maneuver
will take place.
b.Distance of maximum route deviation from the
centerline in miles.
c.Altitude.
JO 7110.65W 12/10/15
9−2−10 Special OperationsPHRASEOLOGY −
CLEARED TO CONDUCT EVASIVE ACTION MANEUVER FROM (fix) TO (fix),
and
(number of miles) EITHER SIDE OF CENTERLINE,
and
MAINTAIN (altitude) THROUGH (altitude),
and
COMPLETE MANEUVER AT (fix) AT (altitude).
9−2−21. NONSTANDARD FORMATION/
CELL OPERATIONS
Occasionally the military is required to operate in a
nonstandard cell formation and controllers should be
knowledgeable of the various tactics employed andthe procedures used.
REFERENCE −
F AAO JO 7610.4, Chapter 12, Section 12, Formation Flight.
a.Formation le aders are responsible for obtaining
ATC approval to conduct nonstandard formation/celloperations.
b.When nonstandard formation/cell operations
have been approved, controllers must assign
sufficient altitudes to allow intra-cell vertical spacing
of 500 feet between each aircraft in the formation.
c.Control nonstandard formation/cell operations
on the basis that MARSA is applicable between the
participating aircraft until they establish approvedseparation which is acknowledged by ATC.
d.Apply approved separation criteria between the
approved nonstandard formation/cell envelope and
nonparticipating aircraft.
e.Clear aircraft operating in a nonstandard
formation/cell to the breakup fix as the clearancelimit. Forward data pertaining to route or altitude
beyond the breakup point to the center concerned as
a part of the routine flight plan information.f.EN ROUTE. If the breakup occurs in your area,
issue appropriate clearances to authorize transition
from formation to individual routes or altitudes. If a
breakup cannot be approved, issue an appropriate
clearance for the flight to continue as a formation.
9−2−22. OPEN SKIES TREATY AIRCRAFT
a.OPEN SKIES aircraft will be identified by the
call sign “OSY” (OPEN SKIES) followed by the
flight number and a one −letter mission suffix.
EXAMPLE −
OSY123D
Mission suffixes:*F = Observation Flights (Priority).*D = Demonstration Flights (Priority).*T = Transit Flights (Nonpriority).
NOTE−
1.Observation/Demonstration flights are conducted
under rigid guidelines outlined in the Treaty of OPENSKIES that govern sensor usage, maximum flightdistances, altitudes and priorities.
2.Transit flights are for the sole purpose of moving an
OPEN SKIES aircraft from airport to airport in
preparation for an actual OPEN SKIES “F” or “D”
mission.
b.Provide priority and special handling to
expedite the movement of an OPEN SKIES
observation or demonstration flight.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority, subpara n.
FAAO JO 7210.3, Para 5 −3−7, OPEN S KIES Tr eaty Aircraft.
Treaty on OPEN SKIES, Treaty Document, 102 −37.
c.OPEN SKIES (F and D) Treaty aircraft, while
maintaining compliance with ATC procedures, must
have priority over activities in special use airspace
(SUA) and must be allowed to transit such airspace as
filed after appropriate and timely coordination has
been accomplished between the using agency and
controlling agency. A letter of agreement is requiredbetween the using agency and the controlling agency
for Open Skies F and D aircraft to transit active SUA.
When Open Skies F and D aircraft transit SUA, anATC facility must provide approved separation
services at all times.
REFERENCE −
F AAO JO 7110.65, Para 9-3-4 Transiting Active SUA/ATCAA
1.F and D T reaty flights transiting SUA will be
handled in the following manner:
(a)The ATC facility controlling the F and D
Treaty flight must advise the using/scheduling
JO 7110.65W 12/10/15
9−2−11 Special Operationsagency or appropriate ATC facility upon initial
notification and when the aircraft is 15 minutes from
the SUA boundary; and
(1)For SUA that has an ATC facility
providing services to the area, provide approved
separation. If the ATC facility is unable to provide
approved separation from the activities in the SUA,
the using agency must confirm that all operations in
the SUA have ceased.
(2)For SUA not associated with an ATC
facility, the using/scheduling agency must return the
SUA to the controlling agency and confirm that all
operations in the SUA have ceased.
(b)If the controlling facility/using agency is
unable to confirm that all conflicting activities in the
SUA have ceased, the OPEN SKIES aircraft must not
be permitted access to the SUA.2.Return SUA to the using agency, if
appropriate, within (15) minutes after the F and D
Treaty aircraft clears the SUA.
d.Clear the aircraft according to the filed flight
plan.
1.Do not ask the pilot to deviate from the
planned action or route of flight except to preclude an
emergency situation or other higher priority aircraft.
2.Do not impose air traffic control delays
except to preclude emergency situations or other
higher priority aircraft.
NOTE−
If for reasons of flight safety the route or altitude must be
changed, r eturn the aircraft to the filed flight plan route as
soon as practical .
JO 7110.65W 12/10/15
9−3−1 Special Use, ATC −Assigned Airspace, and Stationary ALTRVsSection 3. Special Use, ATC −Assigned Airspace, and
Stationary ALTRVs
9−3−1. APPLICATION
Apply the procedures in this section to aircraft
operating in proximity to special use, ATC-assignedairspace (ATCAA), and stationary ALTRVs unless
the airspace is designated an alert area/controlled
firing area or one of the following conditions exist:
NOTE−
These procedures are not applicable to Alert Areas orControlled Firing Areas.
REFERENCE −
P/CG Term − Special Use Airspace.
a.The pilot informs you that permission has been
obtained from the using agency to operate in theairspace.
b.The using agency informs you they have given
permission for the aircraft to operate in the airspace.
NOTE−
Using agency permission may be relayed to the pilot.
c.The restricted/warning area, MOA, ATCAA, or
stationary ALTRV has been released to the
controlling agency.
d.The aircraft is on an approved ALTRV , unless
the airspace area in question is an ATCAA.
NOTE−
Mission project officers are responsible for obtainingapproval for ALTRV operations within prohibited/
restricted/warning areas, MOAs, and stationary ALTRVs.
REFERENCE −
F AAO JO 7110.65, Para 9 −3−4, Transiting Active SUA/ATCAA.
e.Operations in special use airspace and
stationary ALTRVs located in offshore/oceanic
airspace will be conducted in accordance with the
procedures in Chapter 8, Offshore/OceanicProcedures.
9−3−2. SEPARATION MINIMA
Unless clearance of nonparticipating aircraft in/
through/adjacent to a prohibited/restricted/ warningarea/MOA/ATCAA/stationary ALTRV is provided
for in a letter of agreement (LOA) or letter of
procedure (LOP), separate nonparticipating aircraftfrom active special use airspace, ATCAAs, and
stationary ALTRVs by the following minima:a.Assign an altitude consistent with para 4-5-2,
Flight Direction, and 4-5-3, Exceptions, which is at
least 500 feet (above FL 290-1000 feet) above/below
the upper/lower limit of the prohibited/ restricted/
warning area/MOA/ ATCAA/stationary ALTRV .
REFERENCE −
F AAO JO 7210.3, Para 2-1-17, Prohibited/Restricted Areas andStationary ALTRVs
b.Provide radar separation of 3 miles (FL 600 and
above - 6 miles) from the special use airspace,
ATCAA, or stationary ALTRV peripheral boundary.
c.Clear aircraft on airways or routes whose widths
or protected airspace do not overlap the peripheralboundary.
d.Exception. Some prohibited/restricted/
warning areas are established for security reasons or
to contain hazardous activities not involving aircraft
operations. Where facility management has
identified these areas as outlined in FAA Order
JO 7210.3, Facility Operation and Administration,vector aircraft to remain clear of the peripheral
boundary.
NOTE−
Nonparticipating air craft r efers to those aircraft for which
you have separation responsibility and which have notbeen authorized by the using agency to operate in/through
the special use airspace, ATCAA, or stationary ALTRV inquestion. VFR traffic is no t prohibited from transiting
stationary ALTRVs.
9−3−3. VFR-ON-TOP
If the aircraft’s route, track, or altitude may cause it
to enter an active Prohibited/Restricted/Warning
Area, MOA, or ATCAA:
a.Inform the pilot to conduct flight “VFR −on−
top” at least 500 feet above the upper limit or below
the lower limit of the airspace (subject to para 7−3−1,
VFR−on−top); or
PHRASEOLOGY −
MAINTAIN VFR-ON-TOP AT LEAST 500 FEET
ABOVE/BELOW (upper/lower limit of airspace) ACROSS
(name or number of airspace) BETWEEN (fix) AND (fix);
and if the airspace is an ATCAA,
(name of ATCAA) IS ATC ASSIGNED AIRSP ACE.
JO 7110.65W 12/10/15
9−3−2 Special Use, ATC −Assigned Airspace, and Stationary ALTRVsREFERENCE −
F AAO JO 7110.65, Para 7 −1−1, Class A Airspace Restrictions.
b.Clear the aircraft via a routing which provides
approved separation from the airspace.
c.Exception: Some Prohibited/Restricted Areas
are established for security reasons or to contain
hazardous activities not involving aircraft operations.
The addition of 500 (or 1,000) feet to the upper/lowerlimit of these Prohibited/Restricted Areas is not
required if the areas have been identified by facility
management.
REFERENCE −
FAAO JO 7210.3, Para 2 −1−17, Pr ohibited/Restricted Areas.
9−3−4. TRANSITING ACTIVE SUA/ATCAA
If a LOA/LOP has been coordinated with the UsingAgency and permission has been granted to transit the
area:
a.Comply with the instruction/clearances issued
by the Using Agency and provide the applicableseparation minima between aircraft when two or
more aircraft are transiting the area; or
NOTE−
Some Using Agencies are also air tra ffic control facilities.
b.If unable to comply with instructions/clear-
ances, clear the aircraft in accordance with
para 9−3−2, Separation Minima.
NOTE−
The F AA has no jurisdictional authority over the use ofnonjoint use prohibited/restricted/warning area airspace;
therefore, clearance cannot be issued for flight therein
without the appropriate approval.
JO 7110.65W 12/10/15
9−4−1 Fuel DumpingSection 4. Fuel Dumping
9−4−1. INFORMATION REQUIREMENTS
When information is received that an aircraft plans to
dump fuel, determine the route and altitude it will fly
and the weather conditions in which the operation
will be conducted.
9−4−2. ROUTING
Except when it is dumping fuel for emergency
reasons, an aircraft in either VFR or IFR conditionsmay be requested to fly a different route.
9−4−3. ALTITUDE ASSIGNMENT
If an aircraft is dumping fuel in IFR conditions, assign
an altitude at least 2,000 feet above the highest
obstacle within 5 miles of the route or pattern beingflown.
9−4−4. SEPARATION MINIMA
Separate known aircraft from the aircraft dumping
fuel as follows:
a.IFR aircraft by one of the following:
1.1,000 feet above it; or in accordance with
para 4−5−1, Vertical Separation Minima, whichever
is greater.2.2,000 feet below it.
3.5 miles radar.
4.5 miles laterally.
b.VFR radar-identified aircraft by 5 miles and in
accordance with para 5 −6−1, Application.
9−4−5. INFORMATION DISSEMINATION
a.If you are in contact with an aircraft when it
starts dumping fuel, inform other controllers and
facilities which might be concerned. Facilities
concerned must broadcast an advisory on appropriate
radio frequencies at 3 −minute intervals until the
dumping stops.
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT.
FUEL DUMPING IN PROGRESS OVER (location) AT
(altitude) BY (type aircraft) (flight direction).
b.Broadcast a terminating advisory when the fuel
dumping operation is completed.
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT.FUEL DUMPING OVER (location) TERMINATED.
JO 7110.65W 12/10/15
9−5−1 Jettisoning of External StoresSection 5. Jettisoning of External Stores
9−5−1. JETTISONING OF EXTERNAL
STORES
At locations where a drop area has been established
for radar assistance in jettisoning of external stores,
provide vectoring service upon request to:
NOTE−
1.Where required, a mutually satisfactory drop area for
the jettisoning of external stores will be determined byradar-equipped towers and centers in cooperation with the
local USAF units, Air Division, or civil operators and civil
aircraft companies concerned.2.F AA and Headquarters, USAF , have agreed to allow
F AA facilities to vector USAF , Air Force Reserve, andAir National Guard aircraft for jettisoning of all external
stores; i.e., tip tanks, JATO racks, special weapons, etc.
Any similar vectoring service given to civil operators andcivil aircraft companies operating Air Force type aircraft
requires written agreement between the F AA and the user
to relieve the F AA of possible liability. The regionalcounsel’ s office acts for F AA in executing this agreement.
a.USAF, ANG, and Air Force Reserve aircraft at
any time.
b.Civil operators and civil aircraft when a written
agreement is in effect for your location.
JO 7110.65W 12/10/15
9−6−1 Unmanned Free BalloonsSection 6. Unmanned Free Balloons
9−6−1. APPLICATION
FIG 9−6−1
Shapes of 11 Million Cubic Feet Balloon
at Various Altitudes
Apply the following procedures, as appropriate,
when unmanned free balloons are within airspace for
which you have control jurisdiction:
NOTE−
These procedures apply to unmanned free balloons thatcarry payloads as described in 14 CFR Sec-tion 101.1(a)(4). Payloads may weigh severalhundred pounds and the physical shape of the balloons
change at various altitudes/flight levels. (See FIG 9−6−1.)
Balloon and payload ascend at an average rate of 400 feet
a minute. Over the descent area, the payload is normallyreleased from the balloon and descends by parachute at a
minimum rate of 1,000 feet a minute. The balloon is
normally deflated automatically when the payload is
released. The operator is r equired to advise ATC 1 hour in
advance of descent in accordance with 14 CFRSection 101.39.
a.Post the balloon flight on flight progress strips
along the planned trajectory and revise routing as
tracking/position reports require.
NOTE−
The prelaunch notice information should be posted onflight progress strips for planning and operational
purposes.
b.Radar flight follow balloons to the extent that
equipment capabilities permit. If radar flight
following is not possible, tracking should beattempted by communication with the “chase plane,”
telephone contact with the operator, pilot, or ground
observation reports.
NOTE−
Some operators have equipped their balloons withtransponder beacons in addition to a radar reflectiondevice or material r equired by 14 CFR Section 101.35, but
at cruise altitude, the balloon’ s communications equipment
and transponder, if so equipped, are operated intermit-
tently to conserve battery energy.
c.With pilot concurrence, provide separation
between aircraft and balloons when you are satisfied
that the balloon information is sufficiently reliable to
provide the service. Do not attempt to separate
aircraft from the balloon by using vertical separation
unless you have accurate balloon altitude informa-
tion.
d.Provide traffic advisories to all affected aircraft
during initial contact specifying the balloon’s known
or estimated position, direction of movement, and
altitude as “unknown” or “reported,” as appropriate.
NOTE−
Unless ATC requires otherwise, operators of unmannedfree balloons are required to monitor the course of theballoon and r ecord its position at least every two hours. As
required in 14 CFR Section 101.39a, balloon position
reports are not forwarded by the operator unless r equested
by ATC.
PHRASEOLOGY −
UNMANNED FREE BALLOON OVER (name of location),
or
ESTIMATED OVER (name of location), MOVING
(direction of movement).
LAST REPORTED ALTITUDE AT (altitude as r eported by
the operator or determined from pilot report),
or
ALTITUDE UNKNOWN.
e.To transfer flight following responsibility of
balloons between facilities or between controllers,
forward the following information when available:
REFERENCE −
14 CFR Section 101.37, Notice Requirements.
14 CFR Section 101.39, Balloon Position Reports.
JO 7110.65W 12/10/15
9−6−2 Unmanned Free Balloons1.Identification and type; e.g., Flight 804
Balloon.
2.Last known position and altitude.
3.General direction of movement and speed.
4.ETA over facility boundary, sector boundary,
or other point if believed to be reasonably accurate.
5.Other pertinent information.
6.If in radar contact, physically point out the
target to the receiving controller.
7.The name and the telephone number of the
location where tracking is being accomplished.
REFERENCE −
F AAO JO 7110.65, Para 9 −6−2, Derelict Balloons.
9−6−2. DERELICT BALLOONS
Balloons become derelict when a moored balloon
slips its mooring and becomes a hazard to air
navigation or when an unmanned free balloon flight
cannot be terminated as planned. When this occurs:
a.In the case of a moored balloon which has
slipped its moorings, issue traffic advisories.
b.In the case of an unmanned free balloon, flight
follow the balloon and, to the extent possible, provide
aircraft under your control separation from the
balloon.
c.Forward balloon position information received
from pilot reports or derived from radar returns to
your supervisor for further dissemination.d.If radar contact with the balloon is lost,
broadcast an advisory to all aircraft operating in the
airspace af fected by the derelict balloon at 10 −minute
intervals continuing until the derelict balloon is no
longer a factor.
PHRASEOLOGY −
ADVISORY TO ALL AIRCRAFT.
DERELICT BALLOON REPORTED IN THE VICINITY
OF (location),
or
ESTIMATED IN VICINITY OF (location),
or
REPORTED OVER (location),
or
RADAR REPORTED OVER (location).
LAST REPORTED ALTITUDE/FLIGHT LEVEL AT
(altitude/flight level as reported by operator or pilot
report),
or
ALTITUDE/FLIGHT LEVEL UNKNOWN.
e.Transfer flight following responsibility as
outlined in para 9 −6−1, Application, subpara e.
REFERENCE −
FAAO JO 7210.3, Para 18 −5−2, Derelict Balloons/Objects.
JO 7110.65W 12/10/15
9−7−1 Parachute OperationsSection 7. Parachute Operations
9−7−1. COORDINATION
Coordinate any pertinent information prior to and at
the end of each parachute jump or series of jumpswhich begins or ends in your area of jurisdiction with
other affected ATC facilities/sectors.
NOTE−
14 CFR Section 105.15 prescribes the informationrequired from each person requesting authorization or
submitting notification for nonemergency parachute
jumping activity.
REFERENCE −
F AAO JO 7210.3, Para 18 −4−1, Nonemer gency Parachute Jump
Operations.
14 CFR Part 105, Parachute Operations.
9−7−2. CLASS A, CLASS B, AND CLASS C
AIRSPACE
a.Authorize parachute operations only within
airspace designated for the jumping activity.
b.Separate aircraft, other than those participating
in the jump operation, from the airspace authorizedfor the jumping activity.
c.Impose, as necessary, any conditions and
restrictions which in your judgment would promote
the safety of the operation.
REFERENCE −
14 CFR Section 105.25, Parachute Operations in Designated
Airspace.
9−7−3. CLASS D AIRSPACE
TERMINAL
Handle requests to conduct jump operations in or into
Class D airspace in which there is a functioning
control tower as follows:
a.Authorize parachute jumping with respect to
known or observed traffic.b.Issue advisory information to the jump aircraft
and to nonparticipating aircraft as necessary for the
safe conduct of the jump operation.
9−7−4. OTHER CONTROL AIRSPACE
Handle notifications to conduct jump operations in
other Class E airspace as follows:
a.Issue a traffic advisory to the jump aircraft
before the jump. Include aircraft type, altitude, and
direction of flight of all known traffic which willtransit the airspace within which the jump will be
conducted.
NOTE−
14 CFR Section 105.13, Radio Equipment and Use
Requirements, prescribes that, except when otherwise
authorized by ATC, parachute jumping is not allowed in or
into Class E airspace unless radio communications havebeen established between the aircraft and the F AA ATCfacility having jurisdiction over the affected airspace of the
first intended exit altitude at least 5 minutes before the
jumping activity is to begin for the purpose of receivinginformation in the aircraft about known air traffic in thevicinity of the jump aircraft.
b.Issue advisories to all known aircraft which will
transit the airspace within which the jump operations
will be conducted. Advisories must consist of the
location, time, duration, and altitude from which the
jump will be made.
c.When time or numbers of aircraft make
individual transmissions impractical, advisories to
nonparticipating aircraft may be broadcast on
appropriate control frequencies, or when available,the ATIS broadcast.
d.When requested by the pilot and to the extent
possible, assist nonparticipating aircraft to avoid the
airspace within which the jump will be conducted.
JO 7110.65W 12/10/15
9−8−1 Unidentified Flying Object (UFO) ReportsSection 8. Unidentified Flying Object (UFO) Reports
9−8−1. GENERAL
a.Persons wanting to report UFO/unexplained
phenomena activity should contact a UFO/unexplained phenomena reporting data collectioncenter, such as the National UFO Reporting Center,
etc.
b.If concern is expressed that life or property
might be endangered, report the activity to the locallaw enforcement department.
JO 7110.65W 12/10/15
10−1−1 GeneralChapter 10. Emergencies
Section 1. General
10−1−1. EMERGENCY DETERMINATIONS
a.An emergency can be either a Distress or an
Urgency condition as defined in the “Pilot/Controller
Glossary.”
b.A pilot who encounters a Distress condition
should declare an emergency by beginning the initial
communication with the word “Mayday,” preferably
repeated three times. For an Urgency condition, the
word “Pan-Pan” should be used in the same manner.
c.If the words “Mayday” or “Pan-Pan” are not
used and you are in doubt that a situation constitutes
an emergency or potential emergency, handle it as
though it were an emergency.
d.Because of the infinite variety of possible
emergency situations, specific procedures cannot be
prescribed. However, when you believe an emer-
gency exists or is imminent, select and pursue acourse of action which appears to be most appropriate
under the circumstances and which most nearly
conforms to the instructions in this manual.
REFERENCE −
F AAO JO 7110.65, Para 9 −2−7, IFR Military Training Routes.
10−1−2. OBTAINING INFORMATION
Obtain enough information to handle the emergency
intelligently. Base your decision as to what type of
assistance is needed on information and requestsreceived from the pilot because he/she is authorized
by 14 CFR Part 91 to determine a course of action.
10−1−3. PROVIDING ASSISTANCE
Provide maximum assistance to aircraft in distress.
Enlist the services of available radar facilities
operated by the FAA, the military services, and theFederal Communications Commission, as well as
their emergency services and facilities, when the pilot
requests or when you deem necessary.
REFERENCE −
F AAO JO 7110.65, Para 2 −1−4, Operational Priority.10−1−4. RESPONSIBILITY
a.If you are in communication with an aircraft in
distress, handle the emergency and coordinate and
direct the activities of assisting facilities. Transferthis responsibility to another facility only when you
feel better handling of the emergency will result.
b.When you receive information about an aircraft
in distress, forward detailed data to the center inwhose area the emergency exists.
NOTE−
1.Centers serve as the central points for collecting
information, for coordinating with SAR, and forconducting a communications search by distributing any
necessary ALNOTs concerning:
a.Overdue or missing IFR aircraft.
b.Aircraft in an emergency situation occurring in
their respective area.
c.Aircraft on a combination VFR/IFR or an airfiled
IFR flight plan and 30 minutes have passed since the pilot
requested IFR clearance and neither communication norradar contact can be established with it. For SAR purposes,
these aircraft are treated the same as IFR aircraft.
d.Overdue or missing aircraft which have been
authorized to operate in a ccordance with special VFR
clearances.
2.Notifying the center about a VFR aircraft emergency
allows pr ovision of IFR separation if considered necessary.
REFERENCE −
F AAO JO 7110.65, Para 10 −2−5, Emergency Situations.
F AAO JO 7110.65, Para 10 −3−2, Information to be Forwarded to
ARTCC.
F AAO JO 7110.65, Para 10 −3−3, Information to be Forwarded to
RCC.
c.If the aircraft involved is operated by a foreign
air carrier, notify the center serving the departure or
destination point, when either point is within the U.S.,
for relay to the operator of the aircraft.
d.The ARTCC must be responsible for receiving
and relaying all pertinent ELT signal information to
the appropriate authorities.
REFERENCE −
F AAO JO 7110.65, Para 10 −2−10, Emergency Locator Transmitter
(ELT) Signals.
JO 7110.65W 12/10/15
10−1−2 Generale.When consideration is given to the need to
escort an aircraft in distress, evaluate the close
formation required by both aircraft. Special consider-
ation should be given if the maneuver takes the
aircraft through the clouds.
f.Before a determination is made to have an
aircraft in distress be escorted by another aircraft, ask
the pilots if they are familiar with and capable of
formation flight.
1.Do not allow aircraft to join up in formation
during emergency conditions, unless:
(a)The pilots involved are familiar with and
capable of formation flight.
(b)They can communicate with one another,
and have visual contact with each other.
2.If there is a need for aircraft that are not
designated as search and rescue aircraft to get closerto one another than radar separation standards allow,
the maneuver must be accomplished, visually, by the
aircraft involved.
10−1−5. COORDINATION
Coordinate ef forts to the extent possible to assist any
aircraft believed overdue, lost, or in emergency
status.
10−1−6. AIRPORT GROUND EMERGENCY
TERMINAL
a.When an emergency occurs on the airport
proper, control other air and ground traffic to avoid
conflicts in the area where the emergency is beinghandled. This also applies when routes within the
airport proper are required for movement of local
emergency equipment going to or from an emer gency
which occurs outside the airport proper.NOTE−
Aircraft operated in proximity to accident or otheremergency or disaster locations may cause hindrances toairborne and surface rescue or relief operations.
Congestion, distraction or other effects, such as wake
turbulence from nearby airplanes and helicopters, couldprevent or delay proper execution of these operations.
REFERENCE −
F AAO JO 7210.3, Chapter 19, Temporary Flight Restrictions.
14 CFR Section 91.137, Temporary Flight Restrictions.
b.Workload permitting, monitor the progress of
emergency vehicles responding to a situation. If
necessary, provide available information to assistresponders in finding the accident/incident scene.
10−1−7. INFLIGHT EMERGENCIES
INVOLVING MILITARY FIGHTER-TYPEAIRCRAFT
a.The design and complexity of military
fighter-type aircraft places an extremely high
workload on the pilot during an inflight emergency.
The pilot’s full attention is required to maintaincontrol of the aircraft. Therefore, radio frequency and
transponder code changes should be avoided and
radio transmissions held to a minimum, especiallywhen the aircraft experiencing the emergency is at
low altitude.
b.Pilots of military fighter −type aircraft, nor-
mally single engine, experiencing or anticipating loss
of engine power or control may execute a flameout
pattern in an emergency situation. Circumstances
may dictate that the pilot, depending on the positionand nature of the emergency, modify the pattern
based on actual emergency recovery requirements.
c.Military airfields with an assigned flying
mission may conduct practice emergency ap-proaches. Participating units maintain specific
procedures for conducting these operations.
REFERENCE −
F AAO JO 7110.65, Para 3 −10−13, Simulated Flameout (SFO)
Approaches/Emergency Landing Pattern (ELP) Operations/Practice
Precautionary Approaches.
JO 7110.65W 12/10/15
10−2−1 Emergency AssistanceSection 2. Emergency Assistance
10−2−1. INFORMATION REQUIREMENTS
a.Start assistance as soon as enough information
has been obtained upon which to act. Information
requirements will vary, depending on the existing
situation. Minimum required information for inflight
emergencies is:
NOTE−
In the event of an ELT signal see para 10−2−10, Emer gency
Locator Transmitter (ELT) Signals.
1.Aircraft identification and type.
2.Nature of the emergency.
3.Pilot’s desires.
b.After initiating action, obtain the following
items or any other pertinent information from the
pilot or aircraft operator, as necessary:
NOTE−
Normally, do not request this information from militaryfighter-type aircraft that are at low altitudes (i.e., onapproach, immediately after departure, on a low levelroute, etc.). However, request the position of an aircraft
that is not visually sighted or displayed on radar if the
location is not given by the pilot.
1.Aircraft altitude.
2.Fuel remaining in time.
3.Pilot reported weather.
4.Pilot capability for IFR flight.
5.Time and place of last known position.
6.Heading since last known position.
7.Airspeed.
8.Navigation equipment capability.
9.NA V AID signals received.
10.Visible landmarks.
11.Aircraft color.
12.Number of people on board.
13.Point of departure and destination.
14.Emergency equipment on board.10−2−2. FREQUENCY CHANGES
Although 121.5 MHz and 243.0 MHz are emer gency
frequencies, it might be best to keep the aircraft on the
initial contact frequency. Change frequencies only
when there is a valid reason.
10−2−3. AIRCRAFT ORIENTATION
Orientate an aircraft by the means most appropriate
to the circumstances. Recognized methods include:
a.Radar.
b.NA V AIDs.
c.Pilotage.
d.Sighting by other aircraft.
10−2−4. ALTITUDE CHANGE FOR
IMPROVED RECEPTION
When you consider it necessary and if weather and
circumstances permit, recommend that the aircraft
maintain or increase altitude to improvecommunications or radar.
NOTE−
Aircraft with high-bypass turbofan engines (such as B747)
encountering volcanic ash clouds have experienced total
loss of power to all engines. Damage to engines due to
volcanic ash ingestion increases as engine power isincreased, therefore, climb while in the ash cloud is to beavoided where terrain permits.
REFERENCE −
AIM, Para 7−5−9, Flight Operations in Volcanic Ash.
10−2−5. EMERGENCY SITUATIONS
Consider that an aircraft emer gency exists and inform
the RCC or ARTCC when any of the following exist:
NOTE−
USAF facilities are only required to notify the ARTCC.
a.An emergency is declared by either:
1.The pilot.
2.Facility personnel.
3.Officials responsible for the operation of the
aircraft.
b.There is unexpected loss of radar contact and
radio communications with any IFR or VFR aircraft.
JO 7110.65W 12/10/15
10−2−2 Emergency Assistancec.Reports indicate it has made a forced landing, is
about to do so, or its operating efficiency is so
impaired that a forced landing will be necessary.
d.Reports indicate the crew has abandoned the
aircraft or is about to do so.
e.An emergency transponder code is displayed or
reported.
NOTE−
EN ROUTE. ERAM: Code 7700 causes an emergency
indicator to blink in the data block.
f.Intercept or escort aircraft services are required.
g.The need for ground rescue appears likely.
h.An Emergency Locator Transmitter (ELT)
signal is heard or reported.
REFERENCE −
F AAO JO 7110.65, Para 10 −1−3 , Providing Assistance.
F AAO JO 7110.65, Para 10 −2−10 , Emergency Locator Transmitter
(ELT) Signals.
10−2−6. HIJACKED AIRCRAFT
Hijack attempts or actual events are a matter of
national security and require special handling. Policy
and procedures for hijack situations are detailed in
FAAO JO 7610.4, Special Operations. FAAO
JO 7610.4 describes reporting requirements, air crew
procedures, air traffic procedures and escort or
interceptor procedures for hijack situations.
REFERENCE −
F AAO JO 7610.4, Chapter 7, Hijacked/Suspicious Aircraft Reporting
and Procedures.
F AAO JO 7110.65, Para 5 −2−13 , Code Monitor.
10−2−7. VFR AIRCRAFT IN WEATHER
DIFFICULTY
a.If VFR aircraft requests assistance when it
encounters or is about to encounter IFR weather
conditions, determine the facility best able to provide
service. If a frequency change is necessary , advise the
pilot of the reason for the change, and request the
aircraft contact the appropriate control facility.
Inform that facility of the situation. If the aircraft isunable to communicate with the control facility, relay
information and clearances.
b.The following must be accomplished on a
Mode C equipped VFR aircraft which is in
emergency but no longer requires the assignment of
Code 7700 :1.TERMINAL. Assign a beacon code that will
permit terminal minimum safe altitude warning
(MSAW) alarm processing.
2.EN ROUTE. An appropriate keyboard entry
must be made to ensure en route MSAW (EMSAW)
alarm processing.
10−2−8. RADAR ASSISTANCE TO VFR
AIRCRAFT IN WEATHER DIFFICULTY
a.If a VFR aircraft requests radar assistance when
it encounters or is about to encounter IFR weather
conditions, ask th e pilot if he/she is qualified for and
capable of conducting IFR flight.
b.If the pilot states he/she is qualified for and
capable of IFR flight, request him/her to file an IFRflight plan and then issue clearance to destination
airport, as appropriate.
c.If the pilot states he/she is not qualified for or not
capable of conducting IFR flight, or if he/she refuses
to file an IFR flight plan, take whichever of the
following actions is appropriate:
1.Inform the pilot of airports where VFR
conditions are reported, provide other available
pertinent weather information, and ask if he/she will
elect to conduct VFR flight to such an airport.
2.If the action in subpara 1 above is not feasible
or the pilot declines to conduct VFR flight to another
airport, provide radar assistance if the pilot:
(a)Declares an emergency.
(b)Refuses to declare an emergency and you
have determined the exact nature of the radar services
the pilot desires.
3.If the aircraft has already encountered IFR
conditions, inform the pilot of the appropriate
terrain/obstacle clearance minimum altitude. If theaircraft is below appropriate terrain/obstacle clear-
ance minimum altitude and sufficiently accurate
position information has been received or radaridentification is established, furnish a heading or
radial on which to climb to reach appropriate
terrain/obstacle clearance minimum altitude.
d.The following must be accomplished on a
Mode C equipped VFR aircraft which is in
emergency but no longer requires the assignment of
Code 7700 :
JO 7110.65W 12/10/15
10−2−3 Emergency Assistance1.TERMINAL. Assign a beacon code that will
permit terminal minimum safe altitude warning
(MSAW) alarm processing.
2.EN ROUTE. An appropriate keyboard entry
must be made to ensure en route MSAW (EMSAW)
alarm processing.
10−2−9. RADAR ASSISTANCE
TECHNIQUES
Use the following techniques to the extent possible
when you provide radar assistance to a pilot notqualified to operate in IFR conditions:
a.Avoid radio frequency changes except when
necessary to provide a clear communicationschannel.
b.Make turns while the aircraft is in VFR
conditions so it will be in a position to fly a straightcourse while in IFR conditions.
c.Have pilot lower gear and slow aircraft to
approach speed while in VFR conditions.
d.Avoid requiring a climb or descent while in a
turn if in IFR conditions.
e.Avoid abrupt maneuvers.
f.Vector aircraft to VFR conditions.
g.The following must be accomplished on a
Mode C equipped VFR aircraft which is inemergency but no longer requires the assignment of
Code 7700 :
1.TERMINAL. Assign a beacon code that will
permit terminal minimum safe altitude warning
(MSAW) alarm processing.
2.EN ROUTE. An appropriate keyboard entry
must be made to ensure en route MSAW (EMSAW)
alarm processing.
10−2−10. EMERGENCY LOCATOR
TRANSMITTER (ELT) SIGNALS
When an ELT signal is heard or reported:
a.EN ROUTE. Notify the Rescue Coordination
Center (RCC).
NOTE−
FAA Form 7210 −8, ELT INCIDENT, contains standar dized
format for coordination with the RCC.REFERENCE −
FAAO JO 7210.3, Para 9 −3−1, F AA Form 7210 −8, ELT Incident.
b.TERMINAL. Notify the ARTCC which will
coordinate with the RCC.
NOTE−
1.Operational ground testing of emergency locator
transmitters (ELTs) has been authorized during the first
5 minutes of each hour. To avoid confusing the tests with an
actual alarm, the testing is restricted to no more than three
audio sweeps.
2.Controllers can expect pilots to r eport aircraft position
and time the signal was first heard, aircraft position and
time the signal was last heard, aircraft position atmaximum signal strength, flight altitude, and frequency of
the emergency signal (121.5/243.0). (See AIM,
Para 6−2−5, Emergency Locator Transmitter (ELT).)
c.TERMINAL. Attempt to obtain fixes or
bearings on the signal.
d.Solicit the assistance of other aircraft known to
be operating in the signal area.
e.TERMINAL. Forward fixes or bearings and any
other pertinent information to the ARTCC.
NOTE−
Fix information in relation to a VOR or VORTAC (radial-distance) facilitates accurate ELT plotting by RCC andshould be provided when possible.
f.EN ROUTE. When the ELT signal strength
indicates the signal may be emanating fromsomewhere on an airport or vicinity thereof, notify
the on-site technical operations personnel and the
Regional Operations Center (ROC) for their actions.This action is in addition to the above.
g.TERMINAL. When the ELT signal strength
indicates the signal may be emanating from
somewhere on the airport or vicinity thereof, notifythe on-site technical operations personnel and the
ARTCC for their action. This action is in addition to
the above.
h.Air traffic personnel must not leave their
required duty stations to locate an ELT signal source.
NOTE−
Portable handcarried receivers assigned to air trafficfacilities (where no technical operations personnel areavailable) may be loaned to responsible airport personnel
or local authorities to assist in locating the ELT signal
source.
i.EN ROUTE. Notify the RCC and the ROC if
signal source is located/terminated.
JO 7110.65W 12/10/15
10−2−4 Emergency Assistancej.TERMINAL. Notify the ARTCC if signal
source is located/terminated.
REFERENCE −
F AAO JO 7110.65, Para 10 −1−4, Responsibility.
F AAO JO 7110.65, Para 10 −2−1, Information Requirements.
10−2−11. AIRCRAFT BOMB THREATS
a.When information is received from any source
that a bomb has been placed on, in, or near an aircraft
for the purpose of damaging or destroying such
aircraft, notify your supervisor or the facility airtraffic manager. If the threat is general in nature,
handle it as a “Suspicious Activity.” When the threat
is targeted against a specific aircraft and you are incontact with the suspect aircraft, take the following
actions as appropriate:
REFERENCE −
F AAO JO 7610.4, Chapter 7, Hijacked/Suspicious Aircraft Reportingand Procedures.
1.Advise the pilot of the threat.
2.Inform the pilot that technical assistance can
be obtained from an FAA aviation explosives expert.
NOTE−
An F AA aviation explosive expert is on call at all times and
may be contacted by calling the F AA OperationsCenter, Washington, DC, Area Code 202 −267−3333,
ETN 521−0111, or DSN 851 −3750. Technical advice can
be relayed to assist civil or military air crews in their search
for a bomb and in determining what precautionary action
to take if one is found.
3.Ask the pilot if he/she desires to climb or
descend to an altitude that would equalize or reduce
the outside air pressure/existing cabin air pressure
differential. Issue or relay an appropriate clearance
considering MEA, MOCA, MRA, and weather.
NOTE−
Equalizing existing cabin air pressure with outside airpressure is a key step which the pilot may wish to take tominimize the damage potential of a bomb.
4.Handle the aircraft as an emergency and/or
provide the most expeditious handling possible withrespect to the safety of other aircraft, ground
facilities, and personnel.
NOTE−
Emergency handling is discr etionary and should be based
on the situation. With certain types of threats, plans maycall for a low-key action or response.
5.Issue or relay clearances to a new destination
if requested.6.When a pilot requests technical assistance or
if it is apparent that a pilot may need such assistance,
do NOT suggest what actions the pilot should take
concerning a bomb, but obtain the following
information and notify your supervisor who willcontact the FAA aviation explosives expert:
NOTE−
This information is needed by the F AA aviation explosivesexpert so that he/she can assess the situation and make
immediate recommendations to the pilot. The aviation
explosives expert may not be familiar with all militaryaircraft configurations but he/she can offer technicalassistance which would be beneficial to the pilot.
(a)Type, series, and model of the aircraft.
(b)Precise location/description of the bomb
device if known.
(c)Other details which may be pertinent.
NOTE−
The following details may be of significance if known, but
it is not intended that the pilot should disturb a suspected
bomb/bomb container to ascertain the information: Thealtitude or time set for the bomb to explode, type ofdetonating a ction (bar ometric, time, anti-handling, r emote
radio transmitter), power source (battery, electrical,
mechanical), type of initiator (blasting cap, flash bulb,
chemical), and the type of explosive/incendiary charge(dynamite, black powder, chemical).
b.When a bomb threat involves an aircraft on the
ground and you are in contact with the suspect
aircraft, take the following actions in addition to those
discussed in the preceding paragraphs which may be
appropriate:
1.If the aircraft is at an airport where tower
control or FSS advisory service is not available, or if
the pilot ignores the threat at any airport, recommendthat takeoff be delayed until the pilot or aircraft
operator establishes that a bomb is not aboard in
accordance with 14 CFR Part 121. If the pilot insists
on taking off and in your opinion the operation will
not adversely affect other traffic, issue or relay an
ATC clearance.
REFERENCE −
14 CFR Section 121.538, Airplane Security.
2.Advise the aircraft to remain as far away from
other aircraft and facilities as possible, to clear the
runway, if appropriate, and to taxi to an isolated ordesignated search area. When it is impractical or if the
pilot takes an alternative action; e.g., parking and
off-loading immediately, advise other aircraft to
JO 7110.65W 12/10/15
10−2−5 Emergency Assistanceremain clear of the suspect aircraft by at least
100 yards if able.
NOTE−
Passenger deplaning may be of paramount importance and
must be considered before the aircraft is parked or moved
away from service areas. The decision to use ramp facilities
rests with the pilot, aircraft operator/airport manager.
c.If you are unable to inform the suspect aircraft
of a bomb threat or if you lose contact with the
aircraft, advise your supervisor and relay pertinentdetails to other sectors or facilities as deemed
necessary.
d.When a pilot reports the discovery of a bomb or
suspected bomb on an aircraft which is airborne or on
the ground, determine the pilot’s intentions and
comply with his/her requests in so far as possible.Take all of the actions discussed in the preceding
paragraphs which may be appropriate under the
existing circumstances.
e.The handling of aircraft when a hijacker has or
is suspected of having a bomb requires special
considerations. Be responsive to the pilot’s requests
and notify supervisory personnel. Apply hijackingprocedures and of fer assistance to the pilot according
to the preceding paragraphs, if needed.
10−2−12. EXPLOSIVE DETECTION K −9
TEAMS
Take the following actions should you receive an
aircraft request for the location of the nearest
explosive detection K −9 team.
REFERENCE −
FAAO JO 7210.3, Para 2 −1−11, Explosives Detection K −9 Teams.
a.Obtain the aircraft identification and position
and advise your supervisor of the pilot request.
b.When you receive the nearest location of the
explosive detection K −9 team, relay the information
to the pilot.
c.If the aircraft wishes to divert to the airport
location provided, obtain an estimated arrival time
from the pilot and advise your supervisor.
10−2−13. MANPADS ALERT
When a threat or attack from Man −Portable Air
Defense Systems (MANPADS) is determined to be
real, notify and advise aircraft as follows:a.Do not withhold landing clearance. To the
extent possible, issue information on MANPADS
threats, confirmed attacks, or post −event activities in
time for it to be useful to the pilot. The pilot or parent
company will determine the pilot’s actions.
b.MANPADS information will be disseminated
via the ATIS and/or controller −to−pilot
transmissions.
c.Disseminate via controller −to−pilot transmis-
sion until the appropriate MANPADS information isbroadcast via the ATIS and pilots indicate they have
received the appropriate ATIS code. MANPADS
information will include nature and location of threat
or incident, whether reported or observed and by
whom, time (if known), and when transmitting to an
individual aircraft, a request for pilot’s intentions.
PHRASEOLOGY −
ATTENTION (aircraft identification), MANP ADS ALERT.
EXERCISE EXTREME CAUTION. MANP ADS THREAT/ATTACK/POST −EVENT ACTIVITY OBSERVED/
REPORTED BY (reporting agency) (location) AT (time, if
known). (When transmitting to an individual aircraft) SAY
INTENTIONS.
EXAMPLE −
“Attention Eastern Four Seventeen, MANP ADS alert.
Exercise extreme caution. MANP ADS threat reported byTSA, LaGuardia vicinity. Say intentions.” “Attention all aircraft, MANP ADS alert. Exercise extreme
caution. MANP ADS post−event activity observed by tower
south of airport at two −one−zero−zero Zulu.”
d.Report MANPADS threat/attack/post–event
activity via the ATIS and/or controller–to–pilot
transmissions until notified otherwise by the
Domestic Events Network (DEN) Air Traffic
Security Coordinator (ATSC).
REFERENCE −
F AAO JO 7110.65, Para 2 −9−3, Content.
FAAO JO 7210.3, Para 2 −1−9, Handling MANP ADS Incidents.
F AAO JO 7610.4, para 16-1-3, Responsibilities.
10−2−14. UNAUTHORIZED LASER
ILLUMINATION OF AIRCRAFT
a.When a laser event is reported to an air traffic
facility, broadcast on all appropriate frequencies a
general caution warning every five minutes for20 minutes following the last report.
PHRASEOLOGY −
UNAUTHORIZED LASER ILLUMINATION EVENT,(location), (altitude).
b.Terminal facilities must include reported
unauthorized laser illumination events on the ATIS5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
10−2−6 Emergency Assistancebroadcast for one hour following the last report.
Include the time, location, altitude, color, and
direction of the laser as reported by the pilot.
NOTE−
All personnel can expect aircrews to regard lasers as aninflight emergency and may take evasive action to avoidlaser ill umination. Additionally, other aircraft may r equest
clearance to avoid the area.
REFERENCE −
F AAO JO 7110.65, Para 2 −9−3, Content.
FAAO JO 7210.3, Para 2 −1−27, Reporting Unauthorized Laser
Illumination of Aircraft.
10−2−15. EMERGENCY AIRPORT
RECOMMENDATION
a.Consider the following factors when recom-
mending an emergency airport:
1.Remaining fuel in relation to airport
distances.
2.Weather conditions.
NOTE−
Depending on the nature of the emer gency, certain weather
phenomena may deserve weighted consideration when
recommending an airport; e.g., a pilot may elect to flyfarther to land at an airport with VFR instead of IFRconditions.
3.Airport conditions.
4.NA V AID status.
5.Aircraft type.
6.Pilot’s qualifications.
7.Vectoring or homing capability to the
emergency airport.
b.Consideration to the provisions of subpara a and
para 10−2−16, Guidance to Emergency Airport, must
be used in conjunction with the information derivedfrom any automated emergency airport information
source.
10−2−16. GUIDANCE TO EMERGENCY
AIRPORT
a.When necessary, use any of the following for
guidance to the airport:
1.Radar.
2.Following another aircraft.
3.NA V AIDs.4.Pilotage by landmarks.
5.Compass headings.
b.Consideration to the provisions of
para 10−2−15, Emergency Airport Recommenda-
tion, must be used in conjunction with the
information derived from any automated emergency
airport information source.
10−2−17. EMERGENCY OBSTRUCTION
VIDEO MAP (EOVM)
a.The EOVM is intended to facilitate advisory
service to an aircraft in an emergency situation
wherein an appropriate terrain/obstacle clearance
minimum altitude cannot be maintained. It must only
be used and the service provided under the following
conditions:
1.The pilot has declared an emergency, or
2.The controller has determined that an
emergency condition exists or is imminent because of
the pilot’s inability to maintain an appropriate
terrain/obstacle clearance minimum altitude.
NOTE−
Appropriate terrain/obstacle clearance minimum altitudes
may be defined as Minimum IFR Altitude (MIA), MinimumEn Route Altitude (MEA), Minimum Obstruction Clear-ance Altitude (MOCA), or Minimum Vectoring Altitude
(MVA).
b.When providing emergency vectoring service,
the controller must advise the pilot that any headings
issued are emergency advisories intended only todirect the aircraft toward and over an area of lower
terrain/obstacle elevation.
NOTE−
Altitudes and obstructions depicted on the EOVM are theactual altitudes and locations of the obstacle/terrain andcontain no lateral or vertical buffers for obstructionclearance.
REFERENCE −
FAAO JO 7210.3, Para 3 −9−4, Emer gency Obstruction Video Map
(EOVM).
10−2−18. VOLCANIC ASH
a.If a volcanic ash cloud is known or forecast to
be present:
1.Relay all information available to pilots to
ensure that they are aware of the ash cloud’s position
and altitude(s).
2.Suggest appropriate reroutes to avoid the area
of known or forecast ash clouds.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
10−2−7 Emergency AssistanceNOTE−
Volcanic ash clouds are not normally detected by airborne
or air traffic radar systems.
b.If advised by an aircraft that it has entered a
volcanic ash cloud and indicates that a distress
situation exists:
1.Consider the aircraft to be in an emergency
situation.
2.Do not initiate any climb clearances to
turbine−powered aircraft until the aircraft has exited
the ash cloud.
3.Do not attempt to provide escape vectors
without pilot concurrence.
NOTE−
1.The recommended escape maneuver is to r everse course
and begin a descent (if terrain permits). However, it is thepilot’ s responsibility to determine the safest escape routefrom the ash cloud.
2.Controllers should be aware of the possibility of
complete loss of power to any turbine −powered aircraft
that encounters an ash cloud.
REFERENCE −
F AAO JO 7110.65, Para 10 −2−4, Altitude Change for Improved
Reception.
AIM, Para 7 −5−9, Flight Operations in Volcanic Ash.
10−2−19. REPORTING DEATH, ILLNESS,
OR OTHER PUBLIC HEALTH RISK ON
BOARD AIRCRAFT
a.If an air traffic controller receives a report of the
death of person, an illness, and/or other public health
risk obtain the following information and notify theoperations manager in charge (OMIC)/front line
manager (FLM)/controller-in-charge (CIC) as soon
as possible.
1.Call sign.
2.Number of suspected cases of illness on
board.
3.Nature of the illnesses or other public health
risk, if known.
4.Number of persons on board.
5.Number of deaths, if applicable.
6.Pilot’s intent (for example, continue to
destination or divert).
7.Any request for assistance (for example,
needing emergency medical services to meet the
aircraft at arrival).
b.The OMIC/FLM/CIC must relay the informa-
tion to the DEN as soon as possible.
NOTE−
1.If the ATC facility is not actively monitoring the DEN or
does not have a dedicated line to the DEN, they must call
into the DEN directly via (202) 493-4170.
2.Except in extraordinary circumstances, such as a
situation requiring ATC intervention, follow-on coordina-
tion regarding the incident will not involve ATC
frequencies.
3.The initial report to a U.S. ATC facility may be passed
from a prior ATC facility along the route of flight.
REFERENCE −
F AAO JO 7210.3, Para 2-1-29, REPORTING DEATH, ILLNESS, OR
OTHER PUBLIC HEALTH RISK ON BOARD AIRCRAFT5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
10−3−1 Overdue AircraftSection 3. Overdue Aircraft
10−3−1. OVERDUE AIRCRAFT/OTHER
SITUATIONS
a.Consider an aircraft to be overdue and initiate
the procedures stated in this section to issue an
ALNOT when neither communications nor radarcontact can be established and 30 minutes have
passed since:
NOTE−
The procedures in this section also apply to an aircraftreferred to as “missing” or “unreported.”
1.Its ETA over a specified or compulsory
reporting point or at a clearance limit in your area.
2.Its clearance void time.
3.A VFR or IFR aircraft arriving at an airport
not served by an air traffic control tower or flight
service station fails to cancel a flight plan afterreceiving instructions on how to cancel.
NOTE−
If you have reason to believe that an aircraft is overdueprior to 30 minutes, take the appropriate action
immediately.
b.Consider an aircraft to be in an emergency
status and initiate ALNOT procedures in this section
immediately when there is an abnormal simultaneous
loss of radar and communications with an IFR aircraft
or VFR/SVFR aircraft receiving flight followingservices. This situation may be applicable to an
aircraft operating in a non-radar environment and an
unexpected/abnormal loss of communications oc-curs.
c.The ARTCC in whose area the aircraft is
reported as overdue, missing or lost will make these
determinations and takes any subsequent actionrequired.
d.If you have reason to believe that an aircraft is
overdue prior to 30 minutes, take the appropriate
action immediately.
e.The center in whose area the aircraft is first
unreported or overdue will make these determina-
tions and takes any subsequent action required.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−4, Departure Restrictions, Clearance
Void Times, Hold for Release, and Release Times.10−3−2. INFORMATION TO BE
FORWARDED TO ARTCC
TERMINAL
When an aircraft is considered to be in emergency
status that may require SAR procedures, or an IFR
aircraft is overdue, the terminal facility must alert the
appropriate ARTCC and forward the following
information, as available:
a.Flight plan, including color of aircraft, if
known.
b.Time of last transmission received, by whom,
and frequency used.
c.Last position report and how determined.
d.Aircraft beacon code.
e.Number of persons on board.
f.Fuel status.
g.Facility working aircraft and frequency.
h.Last known position, how determined, time,
estimated present position, and maximum range of
flight of the aircraft based on remaining fuel andairspeed.
i.Position of other aircraft near aircraft’s route of
flight, when requested.
j.Whether or not an ELT signal has been heard or
reported in the vicinity of the last known position.
k.Other pertinent information.
REFERENCE −
F AAO JO 7110.65, Para 10 −1−4, Responsibility.
F AAO JO 7110.65, Para 10 −2−5, Emergency Situations.
NOTE−
FSSs serve as the central points for collecting and
disseminating information on an overdue or missingaircraft which is not on an IFR flight plan. Non −FSS ATC
facilities that receive telephone calls or other inquiriesregarding these flights must refer these calls and inquiries
to the appropriate AFSS/FSS.
10−3−3. INFORMATION TO BE
FORWARDED TO RCC
EN ROUTE
When an aircraft is considered to be in emergency
status or an IFR aircraft is overdue, the ARTCC must
JO 7110.65W 12/10/15
10−3−2 Overdue Aircraftalert the RCC and forward the following information,
as available:
a.Facility and person calling.
b.Flight plan, including color of aircraft, if
known.
c.Time of last transmission received, by whom,
and frequency used.
d.Last position report and how determined.
e.Aircraft beacon code.
f.Action taken by reporting facility and proposed
action.
g.Number of persons on board.
h.Fuel status.
i.Facility working aircraft and frequency.
j.Last known position, how determined, time,
estimated present position, and maximum range of
flight of the aircraft based on remaining fuel andairspeed.
k.Position of other aircraft near aircraft’s route of
flight, when requested.
l.Whether or not an ELT signal has been heard or
reported in the vicinity of the last known position.
m.Other pertinent information.
REFERENCE −
F AAO JO 7110.65, Para 10 −1−4, Responsibility.
F AAO JO 7110.65, Para 10 −2−5, Emergency Situations.
NOTE−
FSSs serve as the central points for collecting anddisseminating information on an overdue or missingaircraft which is not on an IFR flight plan. Non −FSS ATC
facilities that receive telephone calls or other inquiries
regarding these flights must refer these calls and inquiries
to the appropriate FSS.
10−3−4. ALNOT
EN ROUTE
a.In addition to routing to the regional office
operations center for the area in which the facility islocated, issue an ALNOT to all centers and Area B
circuits, generally 50 miles on either side of the route
of flight from the last reported position to destination.
Include the original or amended flight plan, as
appropriate, and the last known position of the
aircraft. At the recommendation of the RCC or at yourdiscretion, the ALNOT may be issued to cover the
maximum range of the aircraft.
NOTE−
1.An ALNOT must be issued before the RCC can begin
search and rescue procedures.
2.Flight plan information on military air craft is available
at the FSS serving as a tie-in station for the departure or
destination airport. F AA tie-in stations for airports in thecontinental U.S. are listed in F AAO JO 7350.8, Location
Identifiers. In the West Flight Services Area Office, tie −in
stations are listed in service area publications entitled,“Flight Plan Routing and Airport Search Directory.” For
flights with overseas departure points, the information is
available through the destination FSS or the appropriateIFSS.
b.Upon receipt of an INREQ or ALNOT, check
the position records to determine whether the aircraft
has contacted your facility. Notify the originator ofthe results or status of this check within one hour of
the time the alert was received. Retain the alert in an
active status, and immediately notify the originator of
subsequent contact, until cancellation is received.
c.Include pertinent information in the ALNOT
that will aid the RCC and SAR Teams in conducting
the SAR mission. When known, include:
1.Last known position.
2.Time.
3.Aircraft beacon code.
d.When information is obtained not previously
contained in the ALNOT, issue an amended ALNOT
to update information that will assist the SAR
providers.
10−3−5. RESPONSIBILITY TRANSFER TO
RCC
EN ROUTE
Transfer responsibility for further search to the RCC
when one of the following occurs:
a.Thirty minutes have elapsed after the estimated
aircraft fuel exhaustion time.
b.The aircraft has not been located within one
hour after ALNOT issuance.
c.The ALNOT search has been completed with
negative results.
JO 7110.65W 12/10/15
10−3−3 Overdue Aircraft10−3−6. LAST KNOWN POSITION DETERM-
INATION
a.To assist the RCC and SAR Teams in the
conduct of the SAR mission, provide the mostaccurate latitude and longitude available to the FAA
using en route and terminal radar sensor data near the
aircraft’s last known position.
b.If necessary to prevent an undue delay, utilize
any available method to determine the initial latitude
and longitude. Follow-up as soon as possible with a
formal latitude and longitude using the appropriateterminal or en route facility data extraction tools.
c.If available, solicit the assistance of otheraircraft known to be operating near the aircraft in
distress.
d.Forward this information to the RCC or the
ARTCC as appropriate.
10−3−7. ALNOT CANCELLATION
EN ROUTE
a.When
directed by the RCC, cancel the
ALNOT when the aircraft is located or the search
is abandoned.
b.Include pertinent information in the
cancellation that will aid the RCC, SAR Teams, and
FAA SAR management to include the location wherethe aircraft or wreckage was found.
JO 7110.65W 12/10/15
10−4−1 Control ActionsSection 4. Control Actions
10−4−1. TRAFFIC RESTRICTIONS
IFR traffic which could be affected by an overdue or
unreported aircraft must be restricted or suspendedunless radar separation is used. The facility
responsible must restrict or suspend IFR traffic for a
period of 30 minutes following the applicable time
listed in subparas a thru e:
a.The time at which approach clearance was
delivered to the pilot.
b.The EFC time delivered to the pilot.
c.The arrival time over the NA V AID serving the
destination airport.
d.The current estimate, either the control
facility’s or the pilot’s, whichever is later, at:
1.The appropriate en route NA VAID or fix, and
2.The NA V AID serving the destination airport.
e.The release time and, if issued, the clearance
void time.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−4, Departure Restrictions, Clearance
Void Times, Hold for Release, and Release Times.
10−4−2. LIGHTING REQUIREMENTS
a.EN ROUTE. At nontower or non −FSS loca-
tions, request the airport management to light all
runway lights, approach lights, and all other required
airport lighting systems for at least 30 minutes before
the ETA of the unreported aircraft until the aircraft
has been located or for 30 minutes after its fuel supplyis estimated to be exhausted.
b.TERMINAL. Operate runway lights, approach
lights, and all other required airport lighting systems
for at least 30 minutes before the ETA of the
unreported aircraft until the aircraft has been located
or for 30 minutes after its fuel supply is estimated to
be exhausted.
REFERENCE −
F AAO JO 7110.65, Para 3 −4−1, Emergency Lighting.10−4−3. TRAFFIC RESUMPTION
After the 30 −minute traffic suspension period has
expired, resume normal air traffic control if theoperators or pilots of other aircraft concur. This
concurrence must be maintained for a period of
30 minutes after the suspension period has expired.
REFERENCE −
F AAO JO 7110.65, Para 4 −3−4, Departure Restrictions, Clearance
Void Times, Hold for Release, and Release Times.
10−4−4. COMMUNICATIONS FAILURE
Take the following actions, as appropriate, if
two-way radio communications are lost with anaircraft:
NOTE−
1.When an IFR aircraft experiences two-way radio
communications failure, air traffic control is based onanticipated pilot actions. Pilot procedures and recom −
mended practices are set forth in the AIM, CFRs, andpertinent military regulations.
2.Should the pilot of an aircraft equipped with a coded
radar beacon transponder experience a loss of two-wayradio capability, the pilot can be expected to adjust the
transponder to reply on Mode 3/A Code 7600 .
a.In the event of lost communications with an
aircraft under your control jurisdiction use all
appropriate means available to reestablish commu-nications with the aircraft. These may include, but not
be limited to, emergency frequencies, NA VAIDs that
are equipped with voice capability, FSS, Aeronauti −
cal Radio Incorporated (ARINC), etc.
NOTE−
1.ARINC is a commercial communications corporation
which designs, constructs, operates, leases or otherwiseengages in radio activities serving the aviation community.
ARINC has the capability of relaying information to/from
subscribing aircraft throughout the country.
2.Aircraft communications addressing and reporting
system (ACARS) or selective calling (SELCAL) may be
utilized to reestablish radio communications with suitably
equipped aircraft. ACARS can be accessed by contactingthe San Francisco ARINC communications center, watch
supervisor , at 925 −294−8297 and 800 −621−0140. Pr ovide
ARINC the aircraft call sign, approximate location, andcontact instructions. In order to utilize the SELCAL system,
the SELCAL code for the subject aircraft must be known.
If the SELCAL code is not contained in the remarks section
of the flight plan, contact the pertinent air carrier dispatch
JO 7110.65W 12/10/15
10−4−2 Control Actionsoffice to determine the code. Then contact the
San Francisco ARINC communications center, watchsupervisor , at 925 −294−8297 and 800 −621−0140. Pr ovide
ARINC the aircraft call sign, SELCAL code, approximate
location, and contact instructions.
b.Broadcast clearances through any available
means of communications including the voice feature
of NA V AIDs.
NOTE−
1.Some UHF equipped aircraft have VHF navigation
equipment and can receive 121.5 MHz.
2.“Any available means” includes the use of FSS and
ARINC.
REFERENCE −
F AAO JO 7110.65, Para 4 −2−2, Clearance Prefix.
c.Attempt to re-establish communication by
having the aircraft use its transponder or make turns
to acknowledge clearances and answer questions.
Request any of the following in using thetransponder:
1.Request the aircraft to reply Mode 3/A
“IDENT.”2.Request the aircraft to reply on Code 7600 or
if already on Code 7600 , the appropriate stratum
code.
3.Request the aircraft to change to “stand-by”
for sufficient time for you to be sure that the lack of
a target is the result of the requested action.
PHRASEOLOGY −
REPLY NOT RECEIVED, (appropriate instructions).
(Action) OBSERVED, (additional instructions/informa-
tion if necessary) .
d.Broadcast a clearance for the aircraft to proceed
to its filed alternate airport at the MEA if the aircraft
operator concurs.
REFERENCE −
F AAO JO 7110.65, Para 5 −2−8, Radio Failure.
F AAO JO 7110.65, Para 9 −2−7, IFR Military Training Routes.
e.If radio communications have not been (re)
established with the aircraft after 5 minutes, consider
the aircraft’s or pilot’s activity to be suspicious and
report it to the FLM/CIC per FAA Order JO 7610.4,Chapter 7, Hijacked/Suspicious Aircraft Reporting
and Procedures, and Paragraph 2 −1−25f, Supervisory
Notification, of this order.
JO 7110.65W 12/10/15
10−5−1 Miscellaneous OperationsSection 5. Miscellaneous Operations
10−5−1. EXPLOSIVE CARGO
TERMINAL
When you receive informa tion that an emergency
landing will be made with explosive cargo aboard,
inform the pilot of the safest or least congested airport
areas. Relay the explosive cargo information to:a.The emergency equipment crew.
b.The airport management.
c.The appropriate military agencies, when
requested by the pilot.
JO 7110.65W 12/10/15
10−6−1 Oceanic Emergency ProceduresSection 6. Oceanic Emergency Procedures
10−6−1. APPLICATION
The procedures in this section are to be used solely in
oceanic airspace.
10−6−2. PHASES OF EMERGENCY
Emergency phases are described as follows:
a.Uncertainty phase (INCERFA). When there is
concern about the safety of an aircraft or itsoccupants, an INCERFA exists:
1.When communication from an aircraft has
not been received within 30 minutes after the time a
communication should have been received or afterthe time an unsuccessful attempt to establish
communication with such aircraft was first made,
whichever is earlier; or
2.When an aircraft fails to arrive within
30 minutes after the time of arrival last estimated by
the pilot or by the ATC units, whichever is later.
b.Alert phase (ALERFA). When there is
apprehension about the safety of an aircraft and its
occupants, an ALERFA exists:
1.Following the uncertainty phase when
subsequent attempts to establish communications
with the aircraft, or inquiries to other relevant sources
have failed to reveal any information about theaircraft; or
2.When information has been received which
indicates that the operating efficiency of the aircraft
has been impaired but not to the extent that a forcedlanding is likely; or
3.When communication from an aircraft has
not been received within 60 minutes after the time acommunication should have been received or after
the time an unsuccessful attempt to establish
communication with such aircraft was first made,whichever is earlier.
c.Distress phase (DETRESFA). When there is
reasonable certainty that the aircraft and its occupants
are threatened by grave and imminent danger, aDETRESFA exists:1.Following the alert phase when further
attempts to establish communications with the
aircraft and more widespread inquiries are
unsuccessful; or
2.When the fuel on board is considered to be
exhausted or to be insuf ficient for the aircraft to reach
safety; or
3.When information is received which indi-
cates that the operating efficiency of the aircraft has
been impaired to the extent that a forced landing islikely; or
4.When information is received or it is
reasonably certain that the aircraft is about to make or
has made a forced landing.
10−6−3. ALERTING SERVICE AND
SPECIAL ASSISTANCE
a.Provide alerting service to:
1.All aircraft receiving ATC service;
2.All other aircraft which have filed a flight
plan or which are otherwise known to the ATC unit;
and
3.Any aircraft known or believed to be the
subject of unlawful interference.
b.When alerting service is required, the responsi-
bility for coordinating such service must, unless
otherwise established by letter of agreement, restwith the facility serving the FIR or CTA:
1.Within which the aircraft was flying at the
time of last air-ground radio contact; or
2.Which the aircraft was about to enter if the
last air-ground contact was established at or close to
the boundary; or
3.Within which the point of destination is
located if the aircraft:
(a)Was not equipped with suitable two-way
radio communications equipment; or
(b)Was not under obligation to transmit
position reports.
REFERENCE −
F AAO JO 7110.65, Chapter 8, Section 2, Coordination.
JO 7110.65W 12/10/15
10−6−2 Oceanic Emergency Proceduresc.The responsible Area Control Center (ACC)
must serve as the control point for:
1.Collecting all information relevant to a state
of emergency of an aircraft;
2.Forwarding that information to the appropri-
ate RCC; and
3.Coordinating with other facilities concerned.
d.The responsibility of the ACC to provide
alerting service for military aircraft may be waived
upon a written or recorded request from a militaryagency. In this case, the military request must state
that the military agency assumes full responsibility
for their aircraft while the aircraft are operating in theoceanic airspace.
e.Responsibility to provide alerting service for
flight operations conducted under the “due regard” or
“operational” prerogative of military aircraft is
assumed by the military. When “due regard”
operations are scheduled to end with aircraft filedunder ICAO procedures, the ACC may, if specified in
a letter of agreement, assume responsibility for
alerting service at proposed time filed.
f.In the event of INCERFA, ALERFA, or
DETRESFA, notify the following:
1.When practicable, the aircraft operator.
2.The appropriate RCC.
3.Aeronautical stations having en route com-
munications guard responsibilities at the point of
departure, along or adjacent to the route of flight, and
at the destination.
4.ACCs having jurisdiction over the proposed
route of flight from the last reported position to the
destination airport.
g.INCERFA, ALERFA, and DETRESFA mes-
sages must include the following information, if
available, in the order listed:
1.INCERFA, ALERFA, or DETRESFA
according to the phase of the emergency.
2.Agency and person originating the message.
3.Nature of the emergency.
4.Significant flight plan information.5.The air traffic unit which made the last radio
contact, the time, and the frequency used.
6.The aircraft’s last position report, how it was
received, and what facility received it.
7.Color and distinctive marks of aircraft.
8.Any action taken by reporting office.
9.Other pertinent remarks.
h.An INCERFA phase ends with the receipt of
any information or position report on the aircraft.
Cancel the INCERFA by a message addressed to the
same stations as the INCERFA message.
1.An ALERFA ends when:
(a)Evidence exists that would ease apprehen-
sion about the safety of the aircraft and its occupants;
or
(b)The concerned aircraft lands. Cancel the
ALERFA message by a message addressed to the
same stations as the ALERFA message.
2.A DETRESFA ends when the:
(a)Aircraft successfully lands; or
(b)RCC advises of a successful rescue; or
(c)RCC advises of termination of SAR
activities. Cancel the DETRESFA by a message
addressed to the same stations as the DETRESFAmessage.
i.
A separate chronological record should be kept
on each ALERFA and DETRESFA together with achart which displays the projected route of the
aircraft, position reports received, route of
interceptor aircraft, and other pertinent information.
10−6−4. INFLIGHT CONTINGENCIES
a.If an aircraft over water requests weather, sea
conditions, ditching information, and/or assistance
from surface vessels, or if the controller feels that this
information may be necessary for aircraft safety, it
should be requested from the RCC. Also, an
appropriate AMVER SURPIC should be asked for if
requested by the aircraft or deemed beneficial by
control personnel.
NOTE−
The AMVER Center can deliver, in a matter of minutes, a
SURPIC of vessels in the area of a SAR incident, including
their predicted positions and their characteristics.
JO 7110.65W 12/10/15
10−6−3 Oceanic Emergency Proceduresb.In all cases of aircraft ditching, the airspace
required for SAR operations must be determined by
the RCC. The ACC must block that airspace until the
RCC advises the airspace is no longer required. An
International Notice to Airmen (NOTAM) must beissued describing the airspace affected.
c.The following actions will be taken in the event
an aircraft must make an emergency descent:
1.In the event an aircraft requests an emer gency
descent:
(a)Issue a clearance to the requested altitude
if approved separation can be provided.
(b)Advise the aircraft of the traffic, and
request its intentions if traffic prevents an
unrestricted descent.
PHRASEOLOGY −
ATC ADVISES (aircraft identification) UNABLE TOAPPROVE UNRESTRICTED DESCENT.
TRAFFIC (traffic information).
REQUEST INTENTIONS.
2.In the event an aircraft is making or will make
an emergency descent without a clearance:
(a)Advise other aircraft of the emergency
descent.
PHRASEOLOGY −
ATC ADVISES (aircraft identification/all aircraft) BE
ALERT FOR EMERGENCY DESCENT IN THE VICINITY
OF (latitude/longitude) FROM (altitude/FL) TO(altitude/FL).
(b)Advise other aircraft when the emer gency
descent is complete.
PHRASEOLOGY −
(Aircraft identification/all aircraft) EMERGENCYDESCENT AT (location) COMPLETED.
3.Upon notification that an aircraft is making an
emergency descent through other traffic, take action
immediately to safeguard all aircraft concerned.
4.When appropriate, broadcast by ATC com-
munications, by radio navigation aids, and/or through
aeronautical communication stations/services anemergency message to all aircraft in the vicinity of the
descending aircraft. Include the following informa-
tion:
(a)Location of emergency descent.
(b)Direction of flight.(c)Type aircraft.
(d)Route if appropriate.
(e)Altitude vacated.
(f)Other information.
EXAMPLE −
“Attention all air craft in the vicinity of Tr out, a northbound
D−C Ten on A −T−S Route Alfa Seven Hundr ed is making an
emergency descent from flight level three three zero.”(Repeat as you deem appropriate.)
5.If traffic conditions permit, provide traffic
information to the affected aircraft.
6.Immediately after an emer gency broadcast or
traffic information has been made, issue appropriate
clearances or instructions, as necessary, to all aircraft
involved.
10−6−5. SERVICES TO RESCUE AIRCRAFT
a.Provide IFR separation between the SAR and
the aircraft in distress, except when visual or radar
contact has been established by the search and rescue
aircraft and the pilots of both aircraft concur, IFR
separation may be discontinued.
b.Clear the SAR aircraft to a fixed clearance limit
rather than to the aircraft in distress, which is amoving fix. Issue route clearances that are consistent
with that of the distressed aircraft.
c.Advise the rescue aircraft, as soon as
practicable, of any factors that could adversely af fect
its mission; e.g., unfavorable weather conditions,anticipated problems, the possibility of not being able
to approve an IFR descent through en route traffic,
etc.
d.Advise the appropriate rescue agency of all
pertinent information as it develops.
e.Forward immediately any information about the
action being taken by the RCC, other organizations,
or aircraft to the aircraft concerned.
f.Advise the aircraft operator of the current status
of the SAR operation as soon as practicable.
g.Since prompt, correct, and complete informa-
tion is the key to successful rescue operations, ensure
that this information is swiftly and smoothly supplied
to those organizations actively engaged in rescue
operations.
JO 7110.65W 12/10/15
10−7−1 Ground Missile EmergenciesSection 7. Ground Missile Emergencies
10−7−1. INFORMATION RELAY
When you receive information concerning a ground
missile emergency, notify other concerned facilitiesand take action to have alerting advisories issued by:
a.EN ROUTE. Air carrier company radio sta-
tions for each VFR company aircraft which is or will
be operating in the vicinity of the emergency.
b.EN ROUTE. FSSs adjacent to the emergency
location.
c.TERMINAL. Relay all information concerning
a ground missile emergency to the ARTCC within
whose area the emergency exists and disseminate asa NOTAM.
REFERENCE −
P/CG Term − Notice to Airmen.
10−7−2. IFR AND SVFR MINIMA
Reroute IFR and SVFR aircraft as necessary to avoid
the emergency location by one of the followingminima, or by greater minima when suggested by the
notifying official:
a.Lateral separation − 1 mile between the
emergency location and either of the following:
1.An aircraft under radar control and the
emergency location which can be accurately
determined by reference to the radar scope.2.The airspace to be protected for the route
being flown.
b.Vertical separation − 6,000 feet above the
surface over the emergency location.
10−7−3. VFR MINIMA
Advise all known VFR aircraft which are, or will be,
operating in the vicinity of a ground missileemergency, to avoid the emer gency location by 1 mile
laterally or 6,000 feet vertically, or by a greater
distance or altitude, when suggested by the notifying
official.
10−7−4. SMOKE COLUMN AVOIDANCE
Advise all aircraft to avoid any observed smoke
columns in the vicinity of a ground missileemergency.
10−7−5. EXTENDED NOTIFICATION
EN ROUTE
When reports indicate that an emergency will exist
for an extended period of time, a Notice to Airmen
may be issued.
JO 7110.65W 12/10/15
11−1−1 GeneralChapter 11. Traffic Management Procedures
Section 1. General
11−1−1. DUTY RESPONSIBILITY
a.The mission of the traffic management system
is to balance air traffic demand with system capacity
to ensure the maximum efficient utilization of the
NAS.
b.TBFM must be used to the maximum extent
feasible in preference to miles-in-trail initiatives.
NOTE−
The benefits of TBFM are best realized through the
coordinated effort of all facilities supporting Performance
Based Navigation procedures or Traffic Management
Initiatives (TMIs).
c.It is recognized that the ATCS is integral in the
execution of the traffic management mission.
NOTE−
Complete details of traffic management initiatives andprograms can be found in F AAO JO 7210.3, FacilityOperation and Administration.
11−1−2. DUTIES AND RESPONSIBILITIES
a.Supervisory Traf fic Management Coordinator −
in−Charge (STMCIC) must:
1.Ensure an operational briefing is conducted at
least once during the day and evening shifts.
Participants must include, at a minimum, theSTMCIC, Front Line Manager-in-Charge
(FLMIC)/Controller-in-C harge (CIC) and other
interested personnel as designated by facility
management. Discussions at the meeting should
include meteorological conditions (present and
forecasted), staffing, equipment status, runways inuse, Airport Arrival Rate (AAR)/Metering
Parameters and Traffic Management Initiatives
(TMIs) (present and anticipated).
2.Assume responsibility for TMC duties when
not staffed.
3.Ensure that TMIs are carried out by personnel
providing traffic management services.
4.Where authorized, perform EDST data
entries to keep the activation status of designated
EDST Airspace Configuration Elements current.5.Perform assigned actions in the event of an
EDST outage or degradation, in accordance with the
requirements of FAA Order 7210.3, Facility
Operation and Administration, and as designated by
facility directive.
6.Ensure changes to restrictions/metering are
implemented in a timely manner.
b.FLM/CIC must:
1.Keep the TMU and affected sectors apprised
of situations or circumstances that may cause
congestion or delays.
2.Coordinate with the TMU and personnel
providing air traffic services to develop appropriate
TMIs for sectors and airports in their area of
responsibility.
3.Continuously review TMIs affecting their
area of responsibility and coordinate with TMU for
extensions, revisions, or cancellations.
4.Ensure that TMIs are carried out by personnel
providing air traffic services.
5.Where authorized, perform data entries to
keep the activation status of designated EDST
Airspace Configuration Elements current.
6.Perform assigned actions in the event of an
EDST outage or degradation, in accordance with the
requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.
7.Ensure changes to TMIs
are implemented in
a timely manner.
c.Personnel providing air traffic services must:
1.Ensure that TMIs are enforced within their
area of responsibility. TMIs do not have priority over
maintaining:
(a)Separation of aircraft.
(b)Procedural integrity of the sector.
2.Keep the FLM/CIC an d TMU apprised of
situations or circumstances that may cause conges-
tion or delays.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
11−1−2 General3.Continuously review TMIs affecting their
area of responsibility and coordinate with FLM/CIC
and TMU for extensions, revisions, or cancellations.
4.Where authorized, perform data entries to
keep the activation status of designated EDST
Airspace Configuration Elements current.
5.Perform assigned actions in the event of an
EDST outage or degradation, in accordance with the
requirements of FAA Order 7210.3, Facility
Operation and Administration, and as designated byfacility directive.
d.ARTCCs, unless otherwise coordinated, must:
1.Support TBFM operations and monitor
TBFM equipment to improve situational awareness
for a system approach to TMIs.
2.Monitor arrival flow for potential metering
actions/changes and, if necessary, initiate
coordination with all facilities to discuss the changeto the metering plan.
e.TRACONs, unless otherwise coordinated,
must:
1.Support TBFM operations and monitor
TBFM equipment to improve situational awareness
for a system approach to TMIs.
2.Monitor arrival flow for potential metering
actions/changes and, if necessary, initiatecoordination with all facilities to discuss the change
to the metering plan.
3.Schedule internal departures in accordance
with specific written procedures and agreements
developed with overlying ARTCCs and adjacent
facilities.
f.ATCTs, unless otherwise coordinated, must:
1.Monitor TBFM equipment to improve
situational awareness for a system approach to TMIs.2.Release aircraft, when CFR is in effect, so
they are airborne within a window that extends from
2 minutes prior and ends 1 minute after the assigned
time.
NOTE−
Coordination may be verbal, electronic, or written.
11−1−3. TIME BASED FLOW
MANAGEMENT (TBFM)
During periods of metering, personnel providing air
traffic services must:
a.Display TBFM schedule information on the
main display monitor (MDM).
b.Comply with TBFM-generated metering times
within +/- 1 minute.
1.If TBFM-generated metering time accuracy
within +/- 1 minute cannot be used for specific
aircraft due to significant jumps in the delaycountdown timer (DCT), other TMIs may be used
between those aircraft such as miles-in-trail (MIT) or
minutes-in-trail (MINIT) to assist in delay absorption
until stability resumes.
2.An exception to the requirement to comply
within +/- 1 minute may be authorized for certain
ARTCC sectors if explicitly defined in an appropriatefacility directive.
c.When compliance is not possible, coordinate
with FLM/CIC, personnel providing traffic
management services, and adjacent facilities/sectors
as appropriate.
NOTE−
TBFM accuracy of generated metering times is pr edicated
on several factors, including vectoring outside of TBFM
route conformance boundaries (route recovery logic),
certain trajectory ground speed calculations, and when
TMU resequences a specific flight or flight list. Cautionshould be used in these situations to minimize impact onsurrounding sector traffic an d complexity levels, flight
efficiencies, and user preferences.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
12−1−1 General ControlChapter 12. Canadian Airspace Procedures
Section 1. General Control
12−1−1. APPLICATION
Where control responsibility within Canadian
airspace has been formally delegated to the FAA bythe Transport Canada Aviation Group, apply basic
FAA procedures except for the Canadian procedures
contained in this chapter.
NOTE−
In 1985, the U.S. and Canada established an agreement
recognizing the inherent safety of the ATC procedures
exercised by the other country. This agreement permits the
use of ATC pr ocedures of one country when that country is
exercising ATC in the airspace over the territory of theother country insofar as they are not inconsistent with, or
repugnant to, the laws and regulations or unique
operational requirements of the country over whoseterritory such airspace is located. Accordingly, thischapter was revised to include only those Canadianprocedures that must be used because of a Canadian
regulatory or unique operational requirement.
12−1−2. AIRSPACE CLASSIFICATION
a. Class A airspace. Controlled airspace within
which only IFR flights are permitted. Airspace
designated from the base of all controlled high levelairspace up to and including FL 600.
b. Class B airspace. Controlled airspace within
which only IFR and Controlled VFR (CVFR) flights
are permitted. Includes all controlled low levelairspace above 12,500 feet ASL or at and above the
minimum en route IFR altitude, (whichever is higher)
up to but not including 18,000 feet ASL. ATCprocedures pertinent to IFR flights must be applied to
CVFR aircraft.
NOTE−
The CVFR pilot is responsible to maintain VFR flight andvisual reference to the ground at all times.
c. Class C airspace. Controlled airspace within
which both IFR and VFR flights are permitted, but
VFR flights require a clearance from ATC to enter.d. Class D airspace. Controlled airspace within
which both IFR and VFR flights are permitted, but
VFR flights do not require a clearance from ATC to
enter, however, they must establish two −way
communications with the appropriate ATC agencyprior to entering the airspace.
e. Class E airspace. Airspace within which both
IFR and VFR flights are permitted, but for VFR flight
there are no special requirements.
f. Class F airspace. Airspace of defined dimen-
sions within which activities must be confined
because of their nature, or within which limitations
are imposed upon aircraft operations that are not apart of those activities, or both. Special use airspace
may be classified as Class F advisory or Class F
restricted.
g. Class G airspace. Uncontrolled airspace
within which ATC has neither the authority nor
responsibility for exercising control over air traffic.
12−1−3. ONE THOUSAND −ON−TOP
Clear an aircraft to maintain “at least 1,000 feet-on-
top” in lieu of “VFR −on−top,” provided:
a.The pilot requests it.
NOTE−
It is the pilot’ s responsibility to ensure that the requested
operation can be conducted at least 1,000 feet above all
cloud, haze, smoke, or other formation, with a flightvisibility of 3 miles or more. A pilot’ s request can beconsidered as confirmation that conditions are adequate.
b.The pilot will not operate within Class A or
Class B airspace.
12−1−4. SEPARATION
Apply a lateral, longitudinal, or vertical separation
minimum between aircraft operating in accordance
with an IFR or CVFR clearance, regardless of the
weather conditions.
JO 7110.65W 12/10/15
12−1−2 General Control12−1−5. DEPARTURE CLEARANCE/
COMMUNICATION FAILURE
Base controller action regarding radio failures in
Canadian airspace on the requirement for pilots to
comply with Canadian Airspace Regulations, whichare similar to 14 CFR Section 91.185; however, the
following major difference must be considered when
planning control actions. Except when issuedalternate radio failure instructions by ATC, pilots will
adhere to the following: If flying a turbine-powered
(turboprop or turbojet) aircraft and cleared ondeparture to a point other than the destination,
proceed to the destination airport in accordance with
the flight plan, maintaining the last assigned altitude
or flight level or the minimum en route IFR altitude,
whichever is higher, until 10 minutes beyond thepoint specified in the clearance (clearance limit), and
then proceed at altitude(s) or flight level(s) filed in the
flight plan. When the aircraft will enter U.S. airspace
within 10 minutes after passing the clearance limit,
the climb to the flight planned border crossing
altitude is to be commenced at the estimated time ofcrossing the Canada/U.S. boundary.12−1−6. PARACHUTE JUMPING
Do not authorize parachute jumping without prior
permission from the appropriate Canadian authority.
NOTE−
Canadian regulations require written authority from theMinistry of Transport.
12−1−7. SPECIAL VFR (SVFR)
NOTE−
Pilots do not have to be IFR qualified to fly SVFR at night,
nor does the aircraft have to be equipped for IFR flight.
a.Within a control zone where there is an airport
controller on duty, approve or refuse a pilot’s request
for SVFR on the basis of current or anticipated IFRtraffic only. If approved, specify the period of time
during which SVFR flight is permitted.
b.Within a control zone where there is no airport
controller on duty, authorize or refuse an aircraft’s
request for SVFR on the basis of:
1.Current or anticipated IFR traffic, and
2.Official ceiling and visibility reports.
c.Canadian SVFR weather minimums for:
1.Aircraft other than helicopters. Flight visi-
bility (ground visibility when reported) 1 mile.
2.Helicopters. Flight visibility (ground visi-
bility when available) 1/2 mile.
JO 7110.65W 12/10/15
13−1−1 ERAM Decision Support Tools (EDST)Chapter 13. Decision Support Tools
Section 1. ERAM Decision Support Tools
(EDST)
13−1−1. DESCRIPTION
EDST is used by the sector team in performing its
strategic planning responsibilities. EDST uses flight
plan data, forecast winds, aircraft performance
characteristics, and track data to derive expected
aircraft trajectories, and to predict conflicts betweenaircraft and between aircraft and special use or
designated airspace. It also provides trial planning
and enhanced flight data management capabilities.Under ERAM, the EDST capabilities constitute the
initial En Route decision support tools.
13−1−2. CONFLICT DETECTION AND
RESOLUTION
a.Actively scan EDST information for predicted
aircraft-to-aircraft and aircraft-to-airspace alerts.
b.When a conflict probe alert is displayed,
evaluate the alert and take appropriate action as early
as practical, in accordance with duty priorities.
c.Prioritize the evaluation and resolution of
conflict probe alerts to ensure the safe, expeditious,
and efficient flow of air traffic.
NOTE−
Conflict probe alerts are based on standard radar
separation. Conflict probe does not account for instances
in which greater separation may be needed (e.g.,
non-standard formations, A380) or where reduced
separation is permitted (e.g., 3mile airspace).
d.When a conflict probe alert is displayed and
when sector priorities permit, give consideration to
the following in determining a solution:
1.Solutions that involve direct routing, altitude
changes, removal of a flight direction constraint
(i.e., inappropriate altitude for direction of flight),and/or removal of a static restriction for one or more
pertinent aircraft.
2.Impact on surrounding sector traffic and
complexity levels, flight efficiencies, and user
preferences.e.When the Stop Probe feature is activated for an
aircraft, conflict probe for that aircraft shall be
restarted before transfer of control, unless otherwise
coordinated.
NOTE−
The requirement in paragraph 13-1-2e does not apply to
aircraft entering a non EDST facility.
13−1−3. TRIAL PLANNING
When EDST is operational at the sector and when
sector priorities permit, use the trial plan capability to
evaluate:
a.Solutions to predicted conflicts.
b.The feasibility of granting user requests.
c.The feasibility of removing a flight direction
constraint (i.e., inappropriate altitude for direction of
flight) for an aircraft.
d.The feasibility of removing a static restriction
for an aircraft.
13−1−4. CONFLICT PROBE-BASED
CLEARANCES
When the results of a trial plan based upon a user
request indicate the absence of alerts, every effortshould be made to grant the user request, unless the
change is likely to adversely affect operations at
another sector.
13−1−5. THE AIRCRAFT LIST (ACL),
DEPARTURE LIST (DL) AND FLIGHT DATAMANAGEMENT
a.The ACL must be used as the sector team’s
primary source of flight data.
b.Actively scan EDST to identify automated
notifications that require sector team action.
c.When an ACL or DL entry has a Remarks
indication, the Remarks field of the flight plan mustbe reviewed. Changes to the Remarks field must also
be reviewed.
JO 7110.65W 12/10/15
13−1−2 ERAM Decision Support Tools (EDST)d.Highlighting an entry on the ACL or DL must
be used to indicate the flight requires an action or
special attention.
e.The Special Posting Area (SPA) should be used
to group aircraft that have special significance
(e.g., aircraft to be sequenced, air refueling missions,
formations).
f.Sector teams shall post flight progress strips for
any non-radar flights.
g.A flight progress strip shall be posted for any
flight plan not contained in the EAS.
h.Sector teams shall post any flight progress
strip(s) that are deemed necessary for safe or ef ficient
operations. The sector team shall comply with all
applicable facility directives to maintain posted flight
progress strips.
i.The Drop Track Delete option shall be used in
accordance with facility directives.
13−1−6. MANUAL COORDINATION AND
THE COORDINATION MENU
a.Where automated coordination with a facility is
not available (e.g., an international facility, a VFR
tower), use the Coordination Menu or a flightprogress strip to annotate manual coordination status,
in accordance with facility directives.
b.When the Coordination Menu is used and the
flight plan is subsequently changed, remove the
yellow coding from the Coordination Indicator after
any appropriate action has been taken.
13−1−7. HOLDING
For flights in hold, use the ERAM Hold Data
Menu/Hold View, the EDST Hold Annotations
Menu, a flight progress strip, or a facility approved
worksheet, to annotate holding instructions, in
accordance with facility directives.
13−1−8. RECORDING OF CONTROL DATA
a.All control information not otherwise recorded
via automation recordings or voice recordings must
be manually recorded using approved methods.
b.When a point out has been approved, remove
the yellow color coding on the ACL.
c.When the ACL or DL Free Text Area is used to
enter control information, authorized abbreviations
must be used. You may use:
1.The clearance abbreviations authorized in
TBL 13−1−1.
TBL 13−1−1
Clearance Abbreviations
Abbreviation Meaning
A Cleared to airport (point of intended landing)
B Center clearance delivered
C ATC clears (when clearance relayed through non −ATC facility)
CAF Cleared as filed
D Cleared to depart from the fix
F Cleared to the fix
H Cleared to hold and instructions issued
N Clearance not delivered
O Cleared to the outer marker
PD Cleared to climb/descend at pilot’s discretion
Q Cleared to fly specified sectors of a NA V AID defined in terms of courses, bearings, radials,
or quadrants within a designated radius
T Cleared through (for landing and takeoff through intermediate point)
V Cleared over the fix
X Cleared to cross (airway, route, radial) at (point)
Z Tower jurisdiction
JO 7110.65W 12/10/15
13−1−3 ERAM Decision Support Tools (EDST)2.The miscellaneous abbreviations authorized
in TBL 13 −1−2.
3.The EDST equivalents for control informa-
tion symbols authorized in TBL 13-1-3.
4.Plain language markings when it will aid in
understanding information.
5.Locally approved abbreviations.d.When the ACL or DL Free Text Area is used to
enter control information, the Free Text Area must
remain open and visible. When no longer relevant,
the information entered into the Free Text Area must
be updated or deleted.
e.Control information entered in the Free Text
Area must be used for reference purposes only.
NOTE−
Information entered into the Free Text Area does not passon handoff and, if necessary, must be coordinated.
TBL 13−1−2
Miscellaneous Abbreviations
Abbreviation Meaning
BC Back course approach
CT Contact approach
FA Final approach
FMS Flight management system approach
GPS GPS approach
I Initial approach
ILS ILS approach
MA Missed approach
NDB Nondirectional radio beacon approach
OTP VFR conditions −on−top
PA Precision approach
PT Procedure turn
RA Resolution advisory (Pilot −reported TCAS event)
RH Runway heading
RNA V Area navigation approach
RP Report immediately upon passing (fix/altitude)
RX Report crossing
SA Surveillance approach
SI Straight−in approach
TA TACAN approach
TL Turn left
TR Turn right
VA Visual approach
VR VOR approach5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
13−1−4 ERAM Decision Support Tools (EDST)TBL 13−1−3
EDST Equivalents for Control Information Symbols
Abbreviation Meaning
T dir Depart (direction if specified)
↑ Climb and maintain
↓ Descend and maintain
CR Cruise
AT At
X Cross
M Maintain
/airwayJoin or intercept (airway, jet route,
track, or course)
= While in controlled airspace
WICA While in control area
dir ECA Enter control area
dir OOCA Out of control area
dir ESACleared to enter surface area.
Indicated direction of flight by
appropriate compass letter(s)
TSA altThrough surface area and altitude
indicated direction of flight by
appropriate compass letter(s).
Maintain special VFR conditions(altitude if appropriate) while insurface area
250 KAircraft requested to adjust speed to250 knots
−20 KAircraft requested to reduce speed
20 knots
+30 KAircraft requested to increase speed30 knots
SVFRLocal Special VFR operations in thevicinity of (name) airport are
authorized until (time). Maintain
special VFR conditions (altitude ifappropriate)
B4 Before
AF After or Past
/ Until
*instructions *Alternate instructions
REST Restriction
AOB At or Below
AOA At or AboveAbbreviation Meaning
− From−to (route, time, etc.)
(Alt)B(Alt)Indicates a block altitude assignment.
Altitudes are inclusive, and the first
altitude must be lower than the
second (Example 310B370)
V timeClearance void if aircraft not off
ground by time
CL Pilot canceled flight plan
+info+Information or revised information
forwarded
**alt**Other than assigned altitude reported
Example: **50**
ARC mi. dir. DME arc of VORTAC or TACAN
C freq.Contact (facility) or (freq.), (time, fix,
or altitude if appropriate). Insert
frequency only when it is other than
standard
R Radar contact
R alt Requested altitude
R/ Radar service terminated
RX Radar Contact Lost
RV Radar vector
RVX Pilot resumed own navigation
HO Handoff completed
E Emergency
W Warning
PPoint out initiated. Indicate the
appropriate facility, sector, or
position.
FUEL Minimum fuel
EFC time Expect further clearance at (time)
− fix Direct to fix
FRC Full route clearance
IAF Initial approach fix
NORDO No Radio
PT Procedure turn
RLS Release
REQ Request
SI Straight in3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
13−1−5 ERAM Decision Support Tools (EDST)13−1−9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION
a.The EDST Inappropriate Altitude for Direction
of Flight (IAFDOF) feature must be used in the
automatic mode (i.e., IAFDOF Manual must remaindeselected) unless otherwise authorized in a facility
directive.
b.Completion of any required coordination for
IAFDOF must be acknowledged on the ACL byremoving the IAFDOF coding.
c.Completion of appropriate coordination for an
Unsuccessful T ransmission Message (UTM) must be
acknowledged on the ACL by removing the UTMcoding.
d.Issuance of the Expect Departure Clearance
Time (EDCT) to the pilot or other control facility
must be acknowledged on the DL by removing theEDCT coding.
e.IAFDOF, UTM, or EDCT coding must be
acknowledged only after the appropriate action has
been completed.
f.The first sector which displays Embedded Route
Text (ERT) coding must issue and send/acknowledge
the route prior to initiating a hand-off unless verbally
coordinated or as specified in appropriate facility
directives. Do not send/acknowledge ERT coding
unless the sector has track control for the flight or it
has been otherwise coordinated.
g.Route Action Notifications (RAN) such as ATC
preferred routes or route processing errors must be
amended at the first control position that displays the
RAN unless verbally coordinated or as specified in
appropriate facility directives. Do not remove RAN
coding unless the sector has track control or it has
been otherwise coordinated.
13−1−10. CURRENCY OF TRAJECTORY
INFORMATION
a.The sector team shall perform automation
entries in a timely manner.
NOTE−
1. Conflict pr obe accuracy r equires timely updates of data
used to model each flight’ s trajectory. If this data is notcurrent, the aircraft entries and notification of probe
results for surr ounding sectors and facilities, as well as the
subject sector, may be misleading.
2.Data used to model an individual aircraft’ s trajectory
includes route of flight, assigned and interim altitudes,application/removal of an adapted restriction for that
flight, and aircraft type.
b.An exception to the requirement to enter or
update interim altitudes may be authorized for certain
ARTCC sectors if explicitly defined in an appropriatefacility directive.
NOTE−
Conflict probe accuracy in assigning alert notification isdependent upon entry/ update of a flight’ s interim altitude.
13−1−11. DELAY REPORTING
a.Adhere to all applicable delay reporting
directives.
b.Delay information shall be recorded. Delay
information may be automatically recorded via use of
the EDST Hold Annotations Menu, ERAM HoldData Menu, ERAM Hold View, or manually on flight
progress strips or facility-approved worksheets, in
accordance with the facility-defined standard.
c.When using the Hold Annotation Menu to
automatically record delay information, the hold
annotations shall be deleted when the aircraft is
cleared from holding.
NOTE−
When using EDST hold annotations, delay information
cannot be accurately recorded unless the annotations aredeleted when the aircraft is cleared from holding. Whenusing the ERAM Hold Data Menu or Hold View, delays are
automatically recorded when the aircraft is cleared out of
hold.
13−1−12. OVERDUE AIRCRAFT
Upon receipt of the overdue aircraft notification take
appropriate actions set forth in Chapter 10, Section 3,
Overdue aircraft.
NOTE−
ESDT overdue aircraft notification is based on radar track
data. Updating an aircraft’ s route of fight will remove theoverdue aircraft notification.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
13−1−6 ERAM Decision Support Tools (EDST)13−1−13. USE OF GRAPHICS PLAN
DISPLAY (GPD)
a.Graphic depictions of flight trajectories may be
used only to aid in situational awareness and strategic
planning.
b.Do not use trajectory −based positions as a
substitute for radar track position.
c.Do not use trajectory −based altitude in lieu of
Mode C for altitude confirmation.
d.Do not use the GPD for radar identification,
position information, transfer of radar identification,radar separation, correlation, or pointouts.
13−1−14. FORECAST WINDS
In the event that current forecast wind data are not
available, continue use of conflict probe and trial
planning with appropriate recognition that alert and
trajectory data may be affected.
13−1−15. INTERFACILITY CONNECTIVITY
In the event of a loss of connectivity to an adjacent
ERAM facility, continue use of EDST with
appropriate recognition that alert data may be
affected.13−1−16. SURVEILLANCE AND FLIGHT
DATA OUTAGES
In the event of a surveillance or flight data outage,
electronic flight data may be used to support
situational awareness while the facility transitions to
alternate automation capabilities or non radar
procedures.
13−1−17. AIRSPACE CONFIGURATION
ELEMENTS
a.Airspace Configuration Elements are:
1.Special Activity Airspace (SAA).
2.Airport Stream Filters (ASF).
3.Adapted restrictions.
b.Where assigned as a sector responsibility by
facility directive, the sector team shall update
Airspace Configuration Elements to reflect current
status.
NOTE−
Unless otherwise covered in an LOA or facility directive,
activating or scheduling the SAA in the Airspace Status
View does NOT constitute coordination for activation of
airspace.
c.For Airspace Configuration Elements desig-
nated as a sector responsibility, notify the operational
supervisor when the status of an Airspace Configura-
tion Element has been modified.
JO 7110.65W 12/10/15
13−2−1 Ocean21 − OceanicSection 2. Ocean21 − Oceanic
The following procedures are applicable to the
operation of the Ocean21 Oceanic Air Traf fic Control
(ATC) System.
13−2−1. DESCRIPTION
a.The Ocean21 ATC System is utilized in
designated en route/oceanic airspace. Ocean21includes both surveillance and flight data processing,
which provides the controllers with automated
decision support tools to establish, monitor andmaintain separation between aircraft, and aircraft to
airspace and terrain.
b.Ocean21 capabilities include:
1.MEARTS based radar surveillance
processing.
2.Conflict Prediction and Reporting.
3.Automatic Dependent Surveillance −
Broadcast (ADS−B).
4.Automatic Dependent Surveillance −
Contract (ADS −C).
5.Controller Pilot Data Link Communications
(CPDLC).
6.ATS Interfacility Data Communications
(AIDC).
7.Additional Decision Support Tools used
primarily for situational awareness.
8.Electronic Flight Data including Electronic
Flight Strips.
13−2−2. CONFLICT DETECTION AND
RESOLUTION
The controller must use the most accurate informa-
tion available to initiate, monitor, and maintain
separation.
a.Apply the following procedures in airspace
where conflict probe is being utilized as a decisionsupport tool:
1.Conflict Probe Results.
(a)Controllers must assume that the conflict
probe separation calculations are accurate.(b)Unless otherwise prescribed in sub-
para a3, controllers must utilize the results from
conflict probe to initiate and maintain the prescribed
separation minima.
2.Conflict Resolution.
(a)When a controller is alerted to a conflict,
which will occur in his/her sector, take the
appropriate action to resolve the conflict.
(b)The controller responsible for resolving a
conflict must evaluate the alert and take appropriate
action as early as practical, in accordance with dutypriorities, alert priority, and operational
considerations.
(c)Unless otherwise specified in facility
directives, the controller must take immediate action
to resolve any “red” conflicts.
3.Overriding Conflict Probe.
(a)Controllers must not override conflict
probe except for the following situations:
(1)The application of a separation standard
not recognized by conflict probe listed in sub-
para a8(a), or as identified by facility directive.
(2)When action has been taken to resolve
the identified conflict and separation has been
ensured, or
(3)
Control responsibility has been dele-
gated to another sector or facility, or
(4)Other situations as specified in facility
directives.
(b)Controllers must continue to ensure that
separation is maintained until the overridden conflict
is resolved.
4.Use of Probe when Issuing Clearances. Uti-
lize conflict probe results when issuing a clearance to
ensure that any potential conflict has been given
thorough consideration.
5.Use of Probe when Accepting Manual
Transfers. Prior to manually accepting an aircraft
transfer from an external facility ensure that the
coordinated flight profile is accurately entered,
conflict probe initiated and, if necessary, action istaken to resolve any potential conflicts.
JO 7110.65W 12/10/15
13−2−2 Ocean21 − Oceanic6.Trial Probe. The controller can utilize trial
probe to assess whether there are any potential
conflicts with a proposed clearance or when
performing manual coordination.
NOTE−
Once initiated, trial probe does not take into account any
changes made to the pr oposed profile or to any other flight
profile in the system. It is an assessment by conflict probeof the current situation at the time the controller enters the
trial probe. A trial probe does not alleviate the controllerfrom performing a conflict probe when issuing a clearance
or accepting a transfer.
7.System Unable to Perform Conflict Probe for
a Specific Aircraft.
(a)If a flight’s profile becomes corrupted,
conflict probe may not be able to correctly monitor
separation for that flight. T ake the necessary steps to
correct an aircraft’s flight plan when conflict probecould not be performed.
(b)In addition, after verifying flight plan data
accuracy, utilize other decision support tools toestablish and maintain the appropriate separation
minima until such time that conflict probe can be
utilized.
8.Conflict Probe Limitations.
(a)Conflict Probe does not support the
following separation minima:
(1)Subpara 8 −4−2a2 − Nonintersecting
paths.
(2)Subpara 8 −4−2d − Intersecting flight
paths with variable width protected airspace.
(3)Subpara 8 −4−3a − Reduction of Route
Protected Airspace, below FL 240.
(4)Subpara 8 −4−3b − Reduction of Route
Protected Airspace, at and above FL 240.
(5)Subpara 8 −4−4a1 − Same NA V AID:
VOR/VORTAC/TACAN.
(6)Subpara 8 −4−4a2 − Same NA V AID:
NDB.
(7)Subpara 8 −4−4c − Dead Reckoning.
(8)Para 8−5−4 − Same Direction.
(9)Para 8−8−5 − VFR Climb and Descent.b.
Additional Decision Support Tools: These
support tools include: range/bearing, time of passing,
intercept angle, the aircraft situation display (ASD)
and electronic flight data.
1.The results provided by these additional
decision support/controller tools can be used by the
controller for maintaining situational awareness andmonitoring flight profile information, and for
establishing and maintaining separation standards
not supported by probe, or when probe is unavailable.
2.Under no circumstances must the controller
utilize any of the additional decision support tools to
override probe results when the applicable separation
standard is supported by probe and none of the other
conditions for overriding probe apply.
13−2−3. INFORMATION MANAGEMENT
a.Currency of Informati on: The sector team is
responsible for ensuring that manually entered data is
accurate and timely. Ensure that nonconformantmessages are handled in a timely manner and that the
flight’s profile is updated as necessary.
NOTE−
Conflict probe accuracy requires timely updates of data
used to model each flight’ s trajectory. If this data is notcurrent, the aircraft flight profile and probe results may be
misleading.
b.Data Block Management.
1.Ensure that the data block reflects the most
current flight information and controller appliedindicators as specified in facility directives.
2.Ensure that appropriate and timely action is
taken when a special condition code is indicated in the
data block.
c.Electronic Flight Strip Management.
1.Electronic flight strips must be maintained in
accordance with facility directives and the following:
(a)Annotations. Ensure that annotations are
kept up to date.
(b)Reduced Separation Flags. Ensure the
flags listed below are selected appropriately for each
flight:
(1)M− Mach Number Technique (MNT).
(2)R− Reduced MNT.
JO 7110.65W 12/10/15
13−2−3 Ocean21 − Oceanic(3)D− Distance−based longitudinal.
(4)W−Reduced V ertical Separation Mini-
mum (RVSM).
(c)Degraded RNP. Select when an aircraft
has notified ATC of a reduction in navigation
capability that affects the applicable separationminima.
(d)Restrictions. Ensure restrictions accu-
rately reflect the cleared profile.
d.Queue Management.
1.Manage all sector and coordination queues in
accordance with the appropriate message priority and
the controller’s priority of duties.
2.In accordance with facility directives, ensure
that the messages directed to the error queue areprocessed in a timely manner.
e.Window/List Management.
1.Ensure that the situation display window title
bar is not obscured by other windows and/or lists.
NOTE−
The title bar changes color to denote when priority
information on the ASD is being obscured or is out of view.
2.In accordance with facility directives, ensure
that designated windows and/or lists are displayed at
all times.
13−2−4. CONTROLLER PILOT DATA LINK
COMMUNICATIONS (CPDLC)
a.Means of communication.
1.When CPDLC is available and CPDLC
connected aircraft are operating outside of VHF
coverage, CPDLC must be used as the primary means
of communication.
2.V oice communications may be utilized for
CPDLC aircraft when it will provide an operationaladvantage and/or when workload or equipment
capabilities demand.
3.When CPDLC is being utilized, a voice
backup must exist (e.g., HF, SATCOM, Third party).
4.When a pilot communicates via CPDLC, the
response should be via CPDLC.
5.To the extent possible, the CPDLC message
set should be used in lieu of free text messages.NOTE−
The use of the CPDLC message set ensures the pr oper
“closure” of CPDLC exchanges.
b.Transfer of Communications to the Next
Facility.
1.When the receiving facility is capable of
CPDLC communications, the data link transfer is
automatic and is accomplished within facilityadapted parameters.
2.When a receiving facility is not CPDLC
capable, the transfer of communications must bemade in accordance with local directives and Letters
of Agreement (LOAs).
c.Abnormal conditions.
1.If any portion of the automated transfer fails,
the controller should attempt to initiate the transfer
manually. If unable to complete the data link transfer,
the controller should advise the pilot to log on to the
next facility and send an End Service (EOS) message.
2.If CPDLC fails, voice communications must
be utilized until CPDLC connections can be
reestablished.
3.If the CPDLC connection is lost on a specific
aircraft, the controller should send a connection
request me ssage (CR1) or advise the pilot via backup
communications to log on again.
4.If CPDLC service is to be canceled, the
controller must advise the pilot as early as possible to
facilitate a smooth transition to voice communica-
tions. W orkload permitting, the controller should also
advise the pilot of the reason for the termination ofdata link.
5.When there is uncerta inty that a clearance
was delivered to an ai rcraft via CPDLC, the controller
must continue to protect the airspace associated with
the clearance until an appropriate operational
response is received from the flight crew. If anexpected operational response to a clearance is not
received, the controller will initiate appropriate
action to ensure that the clearance was received by the
flight crew. On initial voice contact with aircraft
preface the message with the following:
PHRASEOLOGY −
(Call Sign) CPDLC Failure, (message).
JO 7110.65W 12/10/15
13−2−4 Ocean21 − Oceanic13−2−5. COORDINATION
In addition to the requirements set forth in Chapter 8,
Offshore/Oceanic Procedures, Section 2, Coordina-tion, automated coordination must constitute
complete coordination between Ocean21 sectors,
both internally and between sectors across adjacentOcean21 facilities, except:
a.When the aircraft is in conflict with another in
the receiving sector, orb.When otherwise specified in facility directives
or LOA.
13−2−6. TEAM RESPONSIBILITIES −
MULTIPLE PERSON OPERATION
a.When operating in a multiple controller
operation at a workstation, ensure all ATC tasks arecompleted according to their priority of duties.
b.Multiple controller operation must be accom-
plished according to facility directives.
JO 7110.65W 12/10/15
Appendix A −1 Standard Operating Practice (SOP) for the Transfer of Position ResponsibilityAppendix A. Standard Operating Practice (SOP) for
the Transfer of Position Responsibility
1. PURPOSE
This appendix prescribes the method and step −by−
step process for conducting a position relief briefing
and transferring position responsibility from onespecialist to another.
2. DISCUSSION
a.In all operational facilities, the increase in
traffic density and the need for the expeditious
movement of traffic without compromising safetyhave emphasized the importance of the position relief
process.
b.The contents, methods, and practices used for
position relief and briefings vary among personnel,and pertinent information is often forgotten or
incompletely covered. Major problems occur
whenever there is a heavy reliance upon memory,unsupported by routines or systematic reminders.
This SOP addresses the complete task of transferring
position responsibility and the associated reliefbriefing.
c.Position relief unavoidably provides workload
for specialists at the time of relief. The intent of this
SOP is to make the transfer of position responsibilitytake place smoothly and to en sure a com plete transfer
of information with a minimum amount of workload.
The method takes advantage of a self −briefing
concept in which the relieving specialist obtains
needed status information by reading from the Status
Information Area/s to begin the relief process. Up to
the moment information related to the control of
aircraft or vehicular movements requires verbalexchanges between specialists during the relief
process. The method also specifies the moment when
the transfer of position responsibility occurs.d.In the final part of the relief process, the
specialist being relieved monitors and reviews the
position to ensure that nothing has been overlooked
or incorrectly displayed and that the transfer of
position responsibility occurred with a completebriefing.
3. TERMSThe following terms are important for a complete
understanding of this SOP:
a.Status Information Area (SIA). Manual or
automatic displays of the current status of positionrelated equipment and operational conditions or
procedures.
b.Written Notes. Manually recorded items of
information kept at designated locations on the
position of operation. They may be an element of the
Status Information Area/s.
c.Checklist. An ordered listing of items to be
covered during a position relief.
4. PRECAUTIONS
a.Specialists involved in the position relief
process should not rush or be influenced to rush.
b.During position operation, each item of status
information which is or may be an operational factor
for the relieving specialist should be recorded as soon
as it is operationally feasible so that it will not be
forgotten or incorrectly recorded.
c.Extra care should be taken when more than one
specialist relieves or is being relieved from a position
at the same time; e.g., combining or decombining
positions. Such simultaneous reliefs should be
approached with caution.5/26/16 JO 7110.65W CHG 1
JO 7110.65W 12/10/15
Appendix A −2 Standard Operating Practice (SOP) for the Transfer of Position Responsibility5. RESPONSIBILITIES
a.The specialist being relieved must be
responsible for ensuring that any pertinent status
information of which he/she is aware is relayed to the
relieving specialist and is either:
1.Accurately displayed in the Status
Information Area/s for which he/she has
responsibility, or
2.Relayed to the position having responsibility
for accurately displaying the status information.
b.The relieving specialist must be responsible for
ensuring that, prior to accepting responsibility for the
position, any unresolved questions pertaining to theoperation of the position are resolved.c.The relieving specialist and the specialist being
relieved must share equal responsibility for the
completeness and accuracy of the position relief
briefing.
d.The specialists engaged in a position relief must
conduct the relief process at the position beingrelieved unless other procedures have been
established and authorized by the facility air traffic
manager.
NOTE−
The “sharing” of this responsibility means that the
specialist being r elieved is obligated to provide a complete,
accurate briefing and the relieving specialist is obligatedto ensure that a briefing takes place and is to his/her totalsatisfaction.
6. STEP−BY−STEP PROCESS
a. PREVIEW THE POSITION
Relieving Specialist Specialist Being Relieved
1.Follow checklist and review the Status Information
Area(s).
NOTE−
This sub-step may be replaced by an authorized pre −position briefing pr ovided an equivalent review of checklist items is
accomplished.
2.Observe position equipment, operational situation, and
the work environment.
3.Listen to voice communications and observe other
operational actions.
4.Observe current and pending aircraft and vehicular
traffic and correlate with flight and other movement
information.
5.Indicate to the specialist being relieved that the position
has been previewed and that the verbal briefing may begin.
NOTE−
Substeps 6a2, 3, and 4 may be conducted concurrently or in any order.3/15/07 7110.65R CHG 2JO 7110.65W CHG 1 5/26/16
JO 7110.65W 12/10/15
Appendix A −3 Standard Operating Practice (SOP) for the Transfer of Position Responsibilityb. VERBAL BRIEFING
Relieving Specialist Specialist Being Relieved
1.Brief the relieving specialist on the abnormal status of
items not listed on the Status Information Area(s) as well as
on any items of special interest calling for verbal
explanation or additional discussion.
2.Brief on traffic if applicable.
3.Brief communication status of all known aircraft.
4.Ask questions necessary to ensure a complete
understanding of the operational situation.
5.Completely answer any questions asked.
c. ASSUMPTION OF POSITION RESPONSIBILITY
Relieving Specialist Specialist Being Relieved
1.Make a statement or otherwise indicate to the specialist
being relieved that position responsibility has been
assumed.
2.Release the position to the relieving specialist and
mentally note the time.
d. REVIEW THE POSITION
Relieving Specialist Specialist Being Relieved
1.Check, verify, and update the information obtained in
steps 6a and b.
2.Check position equipment in accordance with existing
directives.
3.Review checklist, Status Information Area/s, written
notes, and other prescribed sources of information and
advise the relieving specialist of known omissions, updates,
or inaccuracies.
4.Observe overall position operation to determine if
assistance is needed.
5.If assistance is needed, provide or summon it as
appropriate.
6.Advise the appropriate position regarding known Status
Information Area(s) omissions, updates, or inaccuracies.
7.Sign-on the relieving specialist with the time as noted in
step 6c2.
8.Sign off the position in accordance with existing
directives or otherwise indicate that the relief process is
complete.5/26/16 JO 7110.65W CHG 1
Pilot/Controller Glossary 5/26/16
PCG−1PILOT/CONTROLLER
GLOSSARY
PURPOSE
a.This Glossary was compiled to promote a common understanding of the terms used in the Air Traffic
Control system. It includes those terms which are intended for pilot/controller communications. Those termsmost frequently used in pilot/controller communications are printed in bold italics . The definitions are primarily
defined in an operational sense applicable to both users and operators of the National Airspace System. Use ofthe Glossary will preclude any misunderstandings concerning the system’s design, function, and purpose.
b.Because of the international nature of flying, terms used in the Lexicon, published by the International
Civil Aviation Organization (ICAO), are included when they differ from FAA definitions. These terms arefollowed by “[ICAO].” For the reader’s convenience, there are also cross references to related terms in other parts
of the Glossary and to other documents, such as the Code of Federal Regulations (CFR) and the AeronauticalInformation Manual (AIM).
c.This Glossary will be revised, as necessary, to maintain a common understanding of the system.
EXPLANATION OF CHANGES
d.Terms Added:
ATC SURVEILLANCE SOURCE
CHART SUPPLEMENT U.S.
COLD TEMPERATURE COMPENSATION
GROUND BASED AUGMENTATION SYSTEM (GBAS)
GROUND BASED AUGMENTATION SYSTEM (GBAS) LANDING SYSTEM (GLS)
TIME BASED FLOW MANAGEMENT (TBFM)
WIDE AREA MULTILATERATION (WAM)
e.Terms Deleted:
AIRPORT/FACILITY DIRECTORY (A/FD)
EN ROUTE FLIGHT ADVISORY SERVICE
FLIGHT WATCH
OCEANIC DISPLAY AND PLANNING SYSTEM (ODAPS)
REMOTE AIRPORT ADVISORY (RAA)
SUPER HIGH FREQUENCY
TRAFFIC MANAGEMENT ADVISOR (TMA)
f.Terms Modified:
ADVISORY SERVICE
A VIATION WEATHER SERVICE
BRAKING ACTION
DISTANCE MEASURING EQUIPMENT
DME FIX
FLIGHT SERVICE STATION (FSS)
ICING
LOCAL AIRPORT ADVISORY (LAA)
RADAR CONTACT
RADAR CONTACT LOST
Pilot/Controller Glossary 5/26/16
PCG−2SCHEDULED TIME OF ARRIV AL (STA)
UNFROZEN
g.Editorial/format changes were made where necessary. Revision bars were not used due to the insignificant
nature of the changes.
Pilot/Controller Glossary12/10/15
PCG A−1A
AAI−
(See ARRIVAL AIRCRAFT INTERVAL.)
AAR−
(See AIRPORT ARRIVAL RATE.)
ABBREVIATED IFR FLIGHT PLANS − An
authorization by A TC requiring pilots to submit only
that information needed for the purpose of ATC. Itincludes only a small portion of the usual IFR flightplan information. In certain instances, this may beonly aircraft identification, location, and pilotrequest. Other information may be requested ifneeded by ATC for separation/control purposes. It isfrequently used by aircraft which are airborne anddesire an instrument approach or by aircraft which are
on the ground and desire a climb to VFR-on-top.
(See VFR-ON-TOP.)
(Refer to AIM.)
ABEAM− An aircraft is “abeam” a fix, point, or
object when that fix, point, or object is approximately
90 degrees to the right or left of the aircraft track.Abeam indicates a general position rather than aprecise point.
ABORT− To terminate a preplanned aircraft
maneuver; e.g., an aborted takeoff.
ACC [ICAO] −
(See ICAO term AREA CONTROL CENTER.)
ACCELERATE-STOP DISTANCE AV AILABLE −
The runway plus stopway length declared availableand suitable for the acceleration and deceleration ofan airplane aborting a takeoff.
ACCELERATE-STOP DISTANCE A V AILABLE
[ICAO]− The length of the take-off run available plus
the length of the stopway if provided.
ACDO−
(See AIR CARRIER DISTRICT OFFICE.)
ACKNOWLEDGE − Let me know that you have
received and understood this message.
ACL−
(See AIRCRAFT LIST.)
ACLS−
(See AUTOMATIC CARRIER LANDING
SYSTEM.)ACLT−
(See ACTUAL CALCULATED LANDING TIME.)
ACROBATIC FLIGHT − An intentional maneuver
involving an abrupt change in an aircraft’ s attitude, an
abnormal attitude, or abnormal a cceleration not
necessary for normal flight.
(See ICAO term ACROBATIC FLIGHT.)
(Refer to 14 CFR Part 91.)
ACROBATIC FLIGHT [ICAO] − Maneuvers inten-
tionally performed by an aircraft involving an abrupt
change in its attitude, an abnormal attitude, or anabnormal variation in speed.
ACTIVE RUNWAY −
(See RUNWAY IN USE/ACTIVE RUNWAY/DUTY
RUNWAY.)
ACTUAL CALCULATED LANDING TIME −
ACLT is a flight’s frozen calculated landing time. Anactual time determined at freeze calculated landingtime (FCLT) or meter list display interval (MLDI) for
the adapted vertex for each arrival aircraft based uponrunway configuration, airport acceptance rate, airportarrival delay period, and other metered arrivalaircraft. This time is either the vertex time of arrival(VTA) of the aircraft or the tentative calculatedlanding time (TCLT)/ACLT of the previous aircraftplus the arrival aircraft interval (AAI), whichever islater. This time will not be updated in response to the
aircraft’s progress.
ACTUAL NA VIGATION PERFORMANCE
(ANP)−
(See REQUIRED NAVIGATION
PERFORMANCE.)
ADDITIONAL SERVICES − Advisory information
provided by A TC which includes but is not limited to
the following:
a.Traffic advisories.
b.Vectors, when requested by the pilot, to assist
aircraft receiving traffic advisories to avoid observed
traffic.
c.Altitude deviation information of 300 feet or
more from an assigned altitude as observed on averified (reading correctly) automatic altitudereadout (Mode C).
d.Advisories that traffic is no longer a factor.
Pilot/Controller Glossary 12/10/15
PCG A−2e.Weather and chaff information.
f.Weather assistance.
g.Bird activity information.
h.Holding pattern surveillance. Additional ser-
vices are provided to the extent possible contingentonly upon the controller’s capability to fit them intothe performance of higher priority duties and on thebasis of limitations of the radar, volume of traffic,frequency congestion, and controller workload. Thecontroller has complete discretion for determining if
he/she is able to provide or continue to provide aservice in a particular case. The controller’s reasonnot to provide or continue to provide a service in aparticular case is not subject to question by the pilotand need not be made known to him/her.
(See TRAFFIC ADVISORIES.)
(Refer to AIM.)
ADF−
(See AUTOMATIC DIRECTION FINDER.)
ADIZ−
(See AIR DEFENSE IDENTIFICATION ZONE.)
ADLY−
(See ARRIVAL DELAY.)
ADMINISTRATOR − The Federal Aviation Admin-
istrator or any person to whom he/she has delegatedhis/her authority in the matter concerned.
ADR−
(See AIRPORT DEPARTURE RATE.)
ADS [ICAO] −
(See ICAO term AUTOMATIC DEPENDENT
SURVEILLANCE.)
ADS−B−
(See AUTOMATIC DEPENDENT
SURVEILLANCE −BROADCAST.)
ADS−C−
(See AUTOMATIC DEPENDENT
SURVEILLANCE −CONTRACT.)
ADVISE INTENTIONS − Tell me what you plan to
do.
ADVISORY − Advice and information provided to
assist pilots in the safe conduct of flight and aircraft
movement.
(See ADVISORY SERVICE.)ADVISORY FREQUENCY − The appropriate fre-
quency to be used for Airport Advisory Service.
(See LOCAL AIRPORT ADVISORY.)
(See UNICOM.)
(Refer to ADVISORY CIRCULAR NO. 90-42.)
(Refer to AIM.)
ADVISORY SERVICE − Advice and information
provided by a facility to assist pilots in the safeconduct of flight and aircraft movement.
(See ADDITIONAL SERVICES.)
(See LOCAL AIRPORT ADVISORY.)
(See RADAR ADVISORY.)
(See SAFETY ALERT.)
(See TRAFFIC ADVISORIES.)
(Refer to AIM.)
AERIAL REFUELING − A procedure used by the
military to transfer fuel from one aircraft to anotherduring flight.
(Refer to VFR/IFR Wall Planning Charts.)
AERODROME − A defined area on land or water
(including any buildings, installations and equip-ment) intended to be used either wholly or in part for
the arrival, departure, and movement of aircraft.
AERODROME BEACON [ICAO] − Aeronautical
beacon used to indicate the location of an aerodrome
from the air.
AERODROME CONTROL SER VICE [ICAO] − Air
traffic control service for aerodrome traffic.
AERODROME CONTROL TOWER [ICAO] − A
unit established to provide air traffic control serviceto aerodrome traffic.
AERODROME ELEV ATION [ICAO] − The eleva-
tion of the highest point of the landing area.
AERODROME TRAFFIC CIRCUIT [ICAO] − The
specified path to be flown by aircraft operating in the
vicinity of an aerodrome.
AERONAUTICAL BEACON − A visual NA V AID
displaying flashes of white and/or colored light toindicate the location of an airport, a heliport, alandmark, a certain point of a Federal airway inmountainous terrain, or an obstruction.
(See AIRPORT ROTATING BEACON.)
(Refer to AIM.)
AERONAUTICAL CHART − A map used in air
navigation containing all or part of the following:topographic featur es, hazards and obstructions,Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−3navigation aids, navigation routes, designated
airspace, and airports. Commonly used aeronauticalcharts are:
a.Sectional Aeronautical Charts (1:500,000) −
Designed for visual navigation of slow or mediumspeed aircraft. Topographic information on thesecharts features the portrayal of relief and a judiciousselection of visual check points for VFR flight.Aeronautical information includes visual and radioaids to navigation, airports, controlled airspace,restricted areas, obstructions, and related data.
b.VFR Terminal Area Charts (1:250,000) −
Depict Class B airspace which provides for thecontrol or segregation of all the aircraft within ClassB airspace. The chart depicts topographic informa-tion and aeronautical information which includesvisual and radio aids to navigation, airports,
controlled airspace, restricted areas, obstructions,and related data.
c.En Route Low Altitude Charts − Provide
aeronautical information for en route instrumentnavigation (IFR) in the low altitude stratum.Information includes the portrayal of airways, limitsof controlled airspace, position identification andfrequencies of radio aids, selected airports, minimum
en route and minimum obstruction clearancealtitudes, airway distances, reporting points, re-stricted areas, and related data. Area charts, which are
a part of this series, furnish terminal data at a largerscale in congested areas.
d.En Route High Altitude Charts − Provide
aeronautical information for en route instrumentnavigation (IFR) in the high altitude stratum.Information includes the portrayal of jet routes,identification and frequencies of radio aids, selectedairports, distances, time zones, special use airspace,and related information.
e.Instrument Approach Procedures (IAP) Charts −
Portray the aeronautical data which is required toexecute an instrument approach to an airport. Thesecharts depict the procedures, including all relateddata, and the airport diagram. Each procedure isdesignated for use with a specific type of electronicnavigation system including NDB, TACAN, VOR,ILS RNA V and GLS. These charts are identified bythe type of navigational aid(s)/equipment required toprovide final approach guidance.f.Instrument Departure Procedure (DP) Charts −
Designed to expedite clearance delivery and tofacilitate transition between takeoff and en routeoperations. Each DP is presented as a separate chartand may serve a single airport or more than oneairport in a given geographical location.
g.Standard Terminal Arrival (STAR) Charts −
Designed to expedite air traffic control arrivalprocedures and to facilitate transition between enroute and instrument approach operations. EachSTAR procedure is presented as a separate chart andmay serve a single airport or more than one airport ina given geographical location.
h.Airport Taxi Charts − Designed to expedite the
efficient and safe flow of ground traffic at an airport.
These charts are identified by the official airportname; e.g., Ronald Reagan Washington NationalAirport.
(See ICAO term AERONAUTICAL CHART.)
AERONAUTICAL CHAR T [ICAO] − A representa-
tion of a portion of the earth, its culture and relief,specifically designated to meet the requirements ofair navigation.
AERONAUTICAL INFORMATION MANUAL
(AIM)− A primary FAA publication whose purpose
is to instruct airmen about operating in the NationalAirspace System of the U.S. It provides basic flightinformation, ATC Procedures and general instruc-tional information concerning health, medical facts,factors affecting flight safety, accident and hazardreporting, and types of aeronautical charts and theiruse.
AERONAUTICAL INFORMATION PUBLICA-
TION (AIP) [ICAO] − A publication issued by or with
the authority of a State and containing aeronauticalinformation of a lasting character essential to airnavigation.
(See CHART SUPPLEMENT U.S.)
AFFIRMA TIVE− Yes.
AFIS−
(See AUTOMATIC FLIGHT INFORMATION
SERVICE − ALASKA FSSs ONLY.)
AFP−
(See AIRSPACE FLOW PROGRAM.)
AIM−
(See AERONAUTICAL INFORMATION
MANUAL.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−4AIP [ICAO] −
(See ICAO term AERONAUTICAL
INFORMATION PUBLICATION.)
AIR CARRIER DISTRICT OFFICE − An FAA field
office serving an assigned geographical area, staffedwith Flight Standards personnel serving the aviationindustry and the general public on matters related tothe certification and operation of scheduled aircarriers and other large aircraft operations.
AIR DEFENSE EMERGENCY − A military emer-
gency condition declared by a designated authority.This condition exists when an attack upon thecontinental U.S., Alaska, Canada, or U.S. installa-tions in Greenland by hostile aircraft or missiles isconsidered probable, is imminent, or is taking place.
(Refer to AIM.)
AIR DEFENSE IDENTIFICA TION ZONE (ADIZ) −
The area of airspace over land or water, extendingupward from the surface, within which the readyidentification, the location, and the control of aircraft
are required in the interest of national security.
a.Domestic Air Defense Identification Zone. An
ADIZ within the United States along an international
boundary of the United States.
b.Coastal Air Defense Identification Zone. An
ADIZ over the coastal waters of the United States.
c.Distant Early Warning Identification Zone
(DEWIZ). An ADIZ over the coastal waters of theState of Alaska.
d.Land−Based Air Defense Identification Zone.
An ADIZ over U.S. metropolitan areas, which isactivated and deactivated as needed, with dimen-sions, activation dates and other relevant information
disseminated via NOTAM.
Note: ADIZ locations and operating and flight plan
requirements for civil aircraft operations are speci-
fied in 14 CFR Part 99.
(Refer to AIM.)
AIR NA VIGATION FACILITY − Any facility used
in, available for use in, or designed for use in, aid ofair navigation, including landing areas, lights, anyapparatus or equipment for disseminating weatherinformation, for signaling, for radio-directionalfinding, or for radio or other electrical communica-tion, and any other structure or mechanism having asimilar purpose for guiding or controlling flight in the
air or the landing and takeoff of aircraft.
(See NAVIGATIONAL AID.)AIR ROUTE SURVEILLANCE RADAR − Air route
traffic control center (ARTCC) radar used primarilyto detect and display an aircraft’s position while enroute between terminal areas. The ARSR enablescontrollers to provide radar air traffic control service
when aircraft are within the ARSR coverage. In some
instances, ARSR may enable an ARTCC to provideterminal radar services similar to but usually morelimited than those provided by a radar approachcontrol.
AIR ROUTE TRAFFIC CONTROL CENTER − A
facility established to provide air traffic controlservice to aircraft operating on IFR flight planswithin controlled airspace and principally during theen route phase of flight. When equipment capabilitiesand controller workload permit, certain advisory/as-sistance services may be provided to VFR aircraft.
(See EN ROUTE AIR TRAFFIC CONTROL
SERVICES.)
(Refer to AIM.)
AIR TAXI − Used to describe a helicopter/VTOL
aircraft movement conducted above the surface butnormally not above 100 feet AGL. The aircraft mayproceed either via hover taxi or flight at speeds more
than 20 knots. The pilot is solely responsible forselecting a safe airspeed/altitude for the operationbeing conducted.
(See HOVER TAXI.)
(Refer to AIM.)
AIR TRAFFIC − Aircraft operating in the air or on an
airport surface, exclusive of loading ramps andparking areas.
(See ICAO term AIR TRAFFIC.)
AIR TRAFFIC [ICAO] − All aircraft in flight or
operating on the maneuvering area of an aerodrome.
AIR TRAFFIC CLEARANCE − An authorization by
air traffic control for the purpose of preventingcollision between known aircraft, for an aircraft toproceed under specified traffic conditions withincontrolled airspace. The pilot-in-command of anaircraft may not deviate from the provisions of avisual flight rules (VFR) or instrument flight rules(IFR) air traffic clearance except in an emergency orunless an amended clearance has been obtained.Additionally, the pilot may request a differentclearance from that which has been issued by airtraffic control (ATC) if information available to thepilot makes another course of action more practicable
or if aircraft equipment limitations or companyPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−5procedures forbid compliance with the clearance
issued. Pilots may also request clarification oramendment, as appropriate, any time a clearance isnot fully understood, or considered unacceptablebecause of safety of flight. Controllers should, insuch instances and to the extent of operationalpracticality and safety, honor the pilot’s request.14 CFR Part 91.3(a) states: “The pilot in commandof an aircraft is directly responsible for, and is thefinal authority as to, the operation of that aircraft.”THE PILOT IS RESPONSIBLE TO REQUEST ANAMENDED CLEARANCE if ATC issues aclearance that would cause a pilot to deviate from arule or regulation, or in the pilot’s opinion, wouldplace the aircraft in jeopardy.
(See ATC INSTRUCTIONS.)
(See ICAO term AIR TRAFFIC CONTROL
CLEARANCE.)
AIR TRAFFIC CONTROL − A service operated by
appropriate authority to promote the safe, orderly and
expeditious flow of air traffic.
(See ICAO term AIR TRAFFIC CONTROL
SERVICE.)
AIR TRAFFIC CONTROL CLEARANCE [ICAO] −
Authorization for an aircraft to proceed underconditions specified by an air traffic control unit.
Note 1: For convenience, the term air traf fic control
clearance is frequently abbreviated to clearancewhen used in appropriate contexts.
Note 2: The abbreviated term clearance may be
prefixed by the words taxi, takeoff, departure, enroute, approach or landing to indicate the particular
portion of flight to which the air traffic control clear-
ance relates.
AIR TRAFFIC CONTROL SER VICE−
(See AIR TRAFFIC CONTROL.)
AIR TRAFFIC CONTROL SERVICE [ICAO] − A
service provided for the purpose of:
a.Preventing collisions:
1.Between aircraft; and
2.On the maneuvering area between aircraft
and obstructions.
b.Expediting and maintaining an orderly flow of
air traffic.AIR TRAFFIC CONTROL SPECIALIST − A person
authorized to provide air traffic control service.
(See AIR TRAFFIC CONTROL.)
(See FLIGHT SERVICE STATION.)(See ICAO term CONTROLLER.)
AIR TRAFFIC CONTROL SYSTEM COMMAND
CENTER (ATCSCC) − An Air Traffic Tactical
Operations facility responsible for monitoring andmanaging the flow of air traffic throughout the NAS,
producing a safe, orderly, and expeditious flow oftraffic while minimizing delays. The followingfunctions are located at the ATCSCC:
a.Central Altitude Reservation Function
(CARF). Responsible for coordinating, planning,and approving special user requirements under theAltitude Reservation (ALTRV) concept.
(See ALTITUDE RESERVATION.)
b.Airport Reservation Office (ARO).
Responsible for approving IFR flights at designatedhigh density traffic airports (John F. Kennedy,LaGuardia, and Ronald Reagan WashingtonNational) during specified hours.
(Refer to 14 CFR Part 93.)
(See CHART SUPPLEMENT U.S.)
c.U.S. Notice to Airmen (NOTAM) Office.
Responsible for collecting, maintaining, and distrib-uting NOTAMs for the U.S. civilian and military, aswell as international aviation communities.
(See NOTICE TO AIRMEN.)
d.Weather Unit. Monitor all aspects of weather
for the U.S. that might affect aviation including cloud
cover, visibility, winds, precipitation, thunderstorms,
icing, turbulence, and more. Provide forecasts based
on observations and on discussions with meteorolo-gists from various National Weather Service offices,FAA facilities, airlines, and private weather services.
AIR TRAFFIC SERVICE − A generic term meaning:
a.Flight Information Service.
b.Alerting Service.
c.Air Traffic Advisory Service.
d.Air Traffic Control Service:
1.Area Control Service,
2.Approach Control Service, or
3.Airport Control Service.
AIR TRAFFIC SERVICE (ATS) ROUTES − The
term “ATS Route” is a generic term that includes“VOR Federal airways,” “colored Federal airways,”5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−6“jet routes,” and “RNA V routes.” The term “ATS
route” does not replace these more familiar routenames, but serves only as an overall title when listing
the types of routes that comprise the United Statesroute structure.
AIRBORNE − An aircraft is considered airborne
when all parts of the aircraft are off the ground.
AIRBORNE DELAY − Amount of delay to be
encountered in airborne holding.
AIRCRAFT − Device(s) that are used or intended to
be used for flight in the air , and when used in air traffic
control terminology, may include the flight crew.
(See ICAO term AIRCRAFT.)
AIRCRAFT [ICAO] − Any machine that can derive
support in the atmosphere from the reactions of the air
other than the reactions of the air against the earth’ssurface.
AIRCRAFT APPROACH CATEGORY − A
grouping of aircraft based on a speed of 1.3 times the
stall speed in the landing configuration at maximumgross landing weight. An aircraft must fit in only one
category. If it is necessary to maneuver at speeds inexcess of the upper limit of a speed range for acategory, the minimums for the category for thatspeed must be used. For example, an aircraft whichfalls in Category A, but is circling to land at a speedin excess of 91 knots, must use the approachCategory B minimums when circling to land. Thecategories are as follows:
a.Category A − Speed less than 91 knots.
b.Category B − Speed 91 knots or more but less
than 121 knots.
c.Category C − Speed 121 knots or more but less
than 141 knots.
d.Category D − Speed 141 knots or more but less
than 166 knots.
e.Category E − Speed 166 knots or more.
(Refer to 14 CFR Part 97.)
AIRCRAFT CLASSES − For the purposes of Wake
Turbulence Separation Minima, ATC classifiesaircraft as Super, Heavy, Lar ge, and Small as follows:
a.Super. The Airbus A-380-800 (A388) and the
Antonov An-225 (A225) are classified as super.
b.Heavy− Aircraft capable of takeoff weights of
300,000 pounds or more whether or not they areoperating at this weight during a particular phase of
flight.
c.Large− Aircraft of more than 41,000 pounds,
maximum certificated takeoff weight, up to but notincluding 300,000 pounds.
d.Small− Aircraft of 41,000 pounds or less
maximum certificated takeoff weight.
(Refer to AIM.)
AIRCRAFT CO NFLICT− Predicted conflict, within
EDST of two aircraft, or between aircraft andairspace. A Red alert is used for conflicts when thepredicted minimum separation is 5 nautical miles orless. A Yellow alert is used when the predictedminimum separation is between 5 and approximately
12 nautical miles. A Blue alert is used for conflictsbetween an aircraft and predefined airspace.
(See EN ROUTE DECISION SUPPORT
TOOL .)
AIRCRAFT LIST (ACL) − A view available with
EDST that lists aircraft currently in or predicted to be
in a particular sector’s airspace. The view containstextual flight data information in line format and may
be sorted into various orders based on the specificneeds of the sector team.
(See EN ROUTE DECISION SUPPORT
TOOL .)
AIRCRAFT SURGE L AUNCH AND
RECOVERY − Procedures used at USAF bases to
provide increased launch and recovery rates ininstrument flight rules conditions. ASLAR is basedon:
a.Reduced separation between aircraft which is
based on time or distance. Standard arrival separation
applies between participants including multipleflights until the DRAG point. The DRAG point is apublished location on an ASLAR approach whereaircraft landing second in a formation slows to apredetermined airspeed. The DRAG point is thereference point at which MARSA applies asexpanding elements effect separation within a flightor between subsequent participating flights.
b.ASLAR procedures shall be covered in a Letter
of Agreement between the responsible USAFmilitary ATC facility and the concerned FederalAviation Administration facility. Initial ApproachFix spacing requirements are normally addressed asa minimum.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−7AIRMEN’S METEOROLOGICAL
INFORMA TION−
(See AIRMET.)
AIRMET − In-flight weather advisories issued only
to amend the area forecast concerning weatherphenomena which are of operational interest to allaircraft and potentially hazardous to aircraft havinglimited capability because of lack of equipment,instrumentation, or pilot qualifications. AIRMETsconcern weather of less severity than that covered by
SIGMETs or Convective SIGMETs. AIRMETscover moderate icing, moderate turbulence, sustained
winds of 30 knots or more at the surface, widespread
areas of ceilings less than 1,000 feet and/or visibilityless than 3 miles, and extensive mountainobscurement.
(See AWW.)
(See CONVECTIVE SIGMET.)
(See CWA.)
(See SIGMET.)
(Refer to AIM.)
AIRPORT − An area on land or water that is used or
intended to be used for the landing and takeoff ofaircraft and includes its buildings and facilities, ifany.
AIRPORT ADVISOR Y AREA− The area within ten
miles of an airport without a control tower or wherethe tower is not in operation, and on which a FlightService Station is located.
(See LOCAL AIRPORT ADVISORY.)
(Refer to AIM.)
AIRPORT ARRIV AL RATE (AAR) − A dynamic
input parameter specifying the number of arrivingaircraft which an airport or airspace can accept fromthe ARTCC per hour. The AAR is used to calculatethe desired interval between successive arrivalaircraft.
AIRPORT DEPAR TURE RATE (ADR)− A dynamic
parameter specifying the number of aircraft whichcan depart an airport and the airspace can accept perhour.
AIRPORT ELEV ATION − The highest point of an
airport’s usable runways measured in feet from mean
sea level.
(See TOUCHDOWN ZONE ELEVATION.)
(See ICAO term AERODROME ELEVATION.)AIRPORT LIGHTING − Various lighting aids that
may be installed on an airport. Types of airport
lighting include:
a.Approach Light System (ALS) − An airport
lighting facility which provides visual guidance tolanding aircraft by radiating light beams in adirectional pattern by which the pilot aligns theaircraft with the extended centerline of the runway on
his/her final approach for landing. Condenser-Discharge Sequential Flashing Lights/SequencedFlashing Lights may be installed in conjunction with
the ALS at some airports. Types of Approach LightSystems are:
1.ALSF-1− Approach Light System with
Sequenced Flashing Lights in ILS Cat-I configura-tion.
2.ALSF-2− Approach Light System with
Sequenced Flashing Lights in ILS Cat-II configura-tion. The ALSF-2 may operate as an SSALR whenweather conditions permit.
3.SSALF− Simplified Short Approach Light
System with Sequenced Flashing Lights.
4.SSALR− Simplified Short Approach Light
System with Runway Alignment Indicator Lights.
5.MALSF− Medium Intensity Approach Light
System with Sequenced Flashing Lights.
6.MALSR− Medium Intensity Approach Light
System with Runway Alignment Indicator Lights.
7.RLLS− Runway Lead-in Light System
Consists of one or more series of flashing lightsinstalled at or near ground level that provides positive
visual guidance along an approach path, eithercurving or straight, where special problems exist with
hazardous terrain, obstructions, or noise abatementprocedures.
8.RAIL− Runway Alignment Indicator Lights −
Sequenced Flashing Lights which are installed onlyin combination with other light systems.
9.ODALS− Omnidirectional Approach Light-
ing System consists of seven omnidirectionalflashing lights located in the approach area of anonprecision runway. Five lights are located on therunway centerline extended with the first lightlocated 300 feet from the threshold and extending atequal intervals up to 1,500 feet from the threshold.The other two lights are located, one on each side ofthe runway threshold, at a lateral distance of 40 feetfrom the runway edge, or 75 feet from the runway5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−8edge when installed on a runway equipped with a
V ASI.
(Refer to FAAO JO 6850.2, VISUAL GUIDANCE
LIGHTING SYSTEMS.)
b.Runway Lights/Runway Edge Lights − Lights
having a prescribed angle of emission used to definethe lateral limits of a runway. Runway lights areuniformly spaced at intervals of approximately 200feet, and the intensity may be controlled or preset.
c.Touchdown Zone Lighting − Two rows of
transverse light bars located symmetrically about the
runway centerline normally at 100 foot intervals. The
basic system extends 3,000 feet along the runway.
d.Runway Centerline Lighting − Flush centerline
lights spaced at 50-foot intervals beginning 75 feetfrom the landing threshold and extending to within 75
feet of the opposite end of the runway.
e.Threshold Lights − Fixed green lights arranged
symmetrically left and right of the runway centerline,
identifying the runway threshold.
f.Runway End Identifier Lights (REIL) − Two
synchronized flashing lights, one on each side of the
runway threshold, which provide rapid and positiveidentification of the approach end of a particularrunway.
g.Visual Approach Slope Indicator (V ASI) − An
airport lighting facility providing vertical visualapproach slope guidance to aircraft during approachto landing by radiating a directional pattern of highintensity red and white focused light beams whichindicate to the pilot that he/she is “on path” if he/she
sees red/white, “above path” if white/white, and“below path” if red/red. Some airports serving largeaircraft have three-bar V ASIs which provide twovisual glide paths to the same runway.
h.Precision Approach Path Indicator (P API)− An
airport lighting facility, similar to V ASI, providingvertical approach slope guidance to aircraft duringapproach to landing. PAPIs consist of a single row of
either two or four lights, normally installed on the left
side of the runway, and have an ef fective visual range
of about 5 miles during the day and up to 20 miles atnight. PAPIs radiate a directional pattern of highintensity red and white focused light beams whichindicate that the pilot is “on path” if the pilot sees an
equal number of white lights and red lights, withwhite to the left of the red; “above path” if the pilotsees more white than red lights; and “below path” ifthe pilot sees more red than white lights.i.Boundary Lights− Lights defining the perimeter
of an airport or landing area.
(Refer to AIM.)
AIRPORT MARKING AIDS − Markings used on
runway and taxiway surfaces to identify a specificrunway, a runway threshold, a centerline, a hold line,
etc. A runway should be marked in accordance withits present usage such as:
a.Visual.
b.Nonprecision instrument.
c.Precision instrument.
(Refer to AIM.)
AIRPORT REFERENCE POINT (ARP) − The
approximate geometric center of all usable runwaysurfaces.
AIRPORT RESERV ATION OFFICE − Office
responsible for monitoring the operation of slotcontrolled airports. It receives and processes requests
for unscheduled operations at slot controlled airports.
AIRPORT ROTATING BEACON − A visual
NA V AID operated at many airports. At civil airports,alternating white and green flashes indicate thelocation of the airport. At military airports, thebeacons flash alternately white and green, but aredifferentiated from civil beacons by dualpeaked (two
quick) white flashes between the green flashes.
(See INSTRUMENT FLIGHT RULES.)
(See SPECIAL VFR OPERATIONS.)
(See ICAO term AERODROME BEACON.)(Refer to AIM.)
AIRPORT STREAM FILTER (ASF) − An on/off
filter that allows the conflict notification function tobe inhibited for arrival streams into single or multipleairports to prevent nuisance alerts.
AIRPORT SURFACE DETECTION EQUIPMENT
(ASDE)− Surveillance equipment specifically de-
signed to detect aircraft, vehicular traffic, and otherobjects, on the surface of an airport, and to present the
image on a tower display. Used to augment visualobservation by tower personnel of aircraft and/orvehicular movements on runways and taxiways.There are three ASDE systems deployed in the NAS:
a.ASDE−3− a Surface Movement Radar.
b.ASDE−X− a system that uses a X −band Surface
Movement Radar and multilateration. Data fromthese two sources are f used and presented on a digital
display.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−9c.ASDE−3X− an ASDE −X system that uses the
ASDE−3 Surface Movement Radar.
AIRPORT SURVEILLANCE RADAR − Approach
control radar used to detect and display an aircraft’sposition in the terminal area. ASR provides range and
azimuth information but does not provide elevationdata. Coverage of the ASR can extend up to 60 miles.
AIRPORT TAXI CHARTS −
(See AERONAUTICAL CHART.)
AIRPORT TRAFFIC CONTROL SERVICE − A
service provided by a control tower for aircraftoperating on the movement area and in the vicinity of
an airport.
(See MOVEMENT AREA.)
(See TOWER.)(See ICAO term AERODROME CONTROL
SERVICE.)
AIRPORT TRAFFIC CONTROL T OWER−
(See TOWER.)
AIRSPACE CONFLICT − Predicted conflict of an
aircraft and active Special Activity Airspace (SAA).
AIRSPACE FLOW PROGRAM (AFP) − AFP is a
Traffic Management (TM) process administered bythe Air Traffic Control System Command Center(ATCSCC) where aircraft are assigned an ExpectDeparture Clearance Time (EDCT) in order tomanage capacity and demand for a specific area of the
National Airspace System (NAS). The purpose of theprogram is to mitigate the effects of en routeconstraints. It is a flexible program and may beimplemented in various forms depending upon theneeds of the air traffic system.
AIRSPACE HIERARCHY − Within the airspace
classes, there is a hierarchy and, in the event of anoverlap of airspace: Class A preempts Class B, Class
B preempts Class C, Class C preempts Class D, Class
D preempts Class E, and Class E preempts Class G.
AIRSPEED − The speed of an aircraft relative to its
surrounding air mass. The unqualified term“airspeed” means one of the following:
a.Indicated Airspeed − The speed shown on the
aircraft airspeed indicator. This is the speed used inpilot/controller communications under the generalterm “airspeed.”
(Refer to 14 CFR Part 1.)b.True Airspeed − The airspeed of an aircraft
relative to undisturbed air. Used primarily in flightplanning and en route portion of flight. When used in
pilot/controller communications, it is referred to as“true airspeed” and not shortened to “airspeed.”
AIRSTART − The starting of an aircraft engine while
the aircraft is airborne, preceded by engine shutdownduring training flights or by actual engine failure.
AIRWAY − A Class E airspace area established in the
form of a corridor, the centerline of which is definedby radio navigational aids.
(See FEDERAL AIRWAYS.)
(See ICAO term AIRWAY.)
(Refer to 14 CFR Part 71.)
(Refer to AIM.)
AIRWAY [ICAO] − A control area or portion thereof
established in the form of corridor equipped withradio navigational aids.
AIRWAY BEACON − Used to mark airway segments
in remote mountain areas. The light flashes MorseCode to identify the beacon site.
(Refer to AIM.)
AIT−
(See AUTOMATED INFORMATION
TRANSFER.)
ALERFA (Alert Phase) [ICAO] − A situation wherein
apprehension exists as to the safety of an aircraft and
its occupants.
ALERT− A notification to a position that there
is an aircraft-to-aircraft or aircraft-to-airspaceconflict, as detected by Automated ProblemDetection (APD).
ALERT AREA −
(See SPECIAL USE AIRSPACE.)
ALERT NOTICE − A request originated by a flight
service station (FSS) or an air route traffic controlcenter (ARTCC) for an extensive communicationsearch for overdue, unreported, or missing aircraft.
ALERTING SER VICE− A service provided to notify
appropriate organizations regarding aircraft in needof search and rescue aid and assist such or ganizations
as required.
ALNOT−
(See ALERT NOTICE.)
ALONG−TRACK DIST ANCE (A TD) − The distance
measured from a point-in-space by systems using5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−10area navigation reference capabilities that are not
subject to slant range errors.
ALPHANUMERIC DISPLAY − Letters and numer-
als used to show identification, altitude, beacon code,
and other information concerning a target on a radardisplay.
(See AUTOMATED RADAR TERMINAL
SYSTEMS.)
ALTERNATE AERODROME [ICAO] − An aero-
drome to which an aircraft may proceed when itbecomes either impossible or inadvisable to proceed
to or to land at the aerodrome of intended landing.
Note: The aerodrome from which a flight departs
may also be an en-route or a destination alternateaerodrome for the flight.
ALTERNATE AIRPORT − An airport at which an
aircraft may land if a landing at the intended airportbecomes inadvisable.
(See ICAO term ALTERNATE AERODROME.)
ALTIMETER SETTING − The barometric pressure
reading used to adjust a pressure altimeter forvariations in existing atmospheric pressure or to thestandard altimeter setting (29.92).
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
ALTITUDE − The height of a level, point, or object
measured in feet Above Ground Level (AGL) or from
Mean Sea Level (MSL).
(See FLIGHT LEVEL.)
a.MSL Altitude − Altitude expressed in feet
measured from mean sea level.
b.AGL Altitude − Altitude expressed in feet
measured above ground level.
c.Indicated Altitude− The altitude as shown by an
altimeter. On a pressure or barometric altimeter it isaltitude as shown uncorrected for instrument errorand uncompensated for variation from standardatmospheric conditions.
(See ICAO term ALTITUDE.)
ALTITUDE [ICAO]− The vertical distance of a level,
a point or an object considered as a point, measuredfrom mean sea level (MSL).
ALTITUDE READOUT − An aircraft’s altitude,
transmitted via the Mode C transponder feature, thatis visually displayed in 100-foot increments on a
radar scope having readout capability.
(See ALPHANUMERIC DISPLAY.)
(See AUTOMATED RADAR TERMINAL
SYSTEMS.)
(Refer to AIM.)
ALTITUDE RESERV ATION − Airspace utilization
under prescribed conditions normally employed for
the mass movement of aircraft or other special userrequirements which cannot otherwise beaccomplished. ALTRVs are approved by theappropriate FAA facility.
(See AIR TRAFFIC CONTROL SYSTEM
COMMAND CENTER.)
ALTITUDE RESTRICTION − An altitude or alti-
tudes, stated in the order flown, which are to bemaintained until reaching a specific point or time.Altitude restrictions may be issued by ATC due totraffic, terrain, or other airspace considerations.
ALTITUDE RESTRICTIONS ARE CANCELED −
Adherence to previously imposed altitude restric-tions is no longer required during a climb or descent.
ALTRV−
(See ALTITUDE RESERVATION.)
AMVER−
(See AUTOMATED MUTUAL-ASSISTANCE
VESSEL RESCUE SYSTEM.)
APB−
(See AUTOMATED PROBLEM DETECTION
BOUNDARY.)
APD−
(See AUTOMATED PROBLEM DETECTION.)
APDIA−
(See AUTOMATED PROBLEM DETECTION
INHIBITED AREA.)
APPROACH CLEARANCE − Authorization by
ATC for a pilot to conduct an instrument approach.The type of instrument approach for which aclearance and other pertinent information is provided
in the approach clearance when required.
(See CLEARED APPROACH.)
(See INSTRUMENT APPROACH
PROCEDURE.)
(Refer to AIM.)
(Refer to 14 CFR Part 91.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−11APPROACH CONTROL FACILITY − A terminal
ATC facility that provides approach control service ina terminal area.
(See APPROACH CONTROL SERVICE.)
(See RADAR APPROACH CONTROL
FACILITY.)
APPROACH CONTROL SERVICE − Air traffic
control service provided by an approach controlfacility for arriving and departing VFR/IFR aircraftand, on occasion, en route aircraft. At some airportsnot served by an approach control facility, theARTCC provides limited approach control service.
(See ICAO term APPROACH CONTROL
SERVICE.)
(Refer to AIM.)
APPROACH CONTROL SERVICE [ICAO] − Air
traffic control service for arriving or departingcontrolled flights.
APPROACH GATE − An imaginary point used
within ATC as a basis for vectoring aircraft to thefinal approach course. The gate will be establishedalong the final approach course 1 mile from the final
approach fix on the side away from the airport andwill be no closer than 5 miles from the landingthreshold.
APPROACH HOLD AREA − The locations on
taxiways in the approach or departure areas of arunway designated to protect landing or departingaircraft. These locations are identified by signs andmarkings.
APPROACH LIGHT SYSTEM −
(See AIRPORT LIGHTING.)
APPROACH SEQUENCE − The order in which
aircraft are positioned while on approach or awaiting
approach clearance.
(See LANDING SEQUENCE.)
(See ICAO term APPROACH SEQUENCE.)
APPROACH SEQUENCE [ICAO] − The order in
which two or more aircraft are cleared to approach to
land at the aerodrome.
APPROACH SPEED − The recommended speed
contained in aircraft manuals used by pilots whenmaking an approach to landing. This speed will vary
for different segments of an approach as well as foraircraft weight and configuration.APPROACH WITH VERTICAL GUIDANCE
(APV)– A term used to describe RNA V approachprocedures that provide lateral and vertical guidance
but do not meet the requirements to be considered aprecision approach.
APPROPRIATE ATS AUTHORITY [ICAO] − The
relevant authority designated by the State responsible
for providing air traffic services in the airspaceconcerned. In the United States, the “appropriate ATS
authority” is the Program Director for Air TrafficPlanning and Procedures, ATP-1.
APPROPRIATE AUTHORITY −
a.Regarding flight over the high seas: the relevant
authority is the State of Registry.
b.Regarding flight over other than the high seas:
the relevant authority is the State having sovereigntyover the territory being overflown.
APPROPRIATE OBSTACLE CLEARANCE
MINIMUM AL TITUDE− Any of the following:
(See MINIMUM EN ROUTE IFR ALTITUDE.)
(See MINIMUM IFR ALTITUDE.)
(See MINIMUM OBSTRUCTION CLEARANCE
ALTITUDE.)
(See MINIMUM VECTORING ALTITUDE.)
APPROPRIATE TERRAIN CLEARANCE
MINIMUM AL TITUDE− Any of the following:
(See MINIMUM EN ROUTE IFR ALTITUDE.)
(See MINIMUM IFR ALTITUDE.)
(See MINIMUM OBSTRUCTION CLEARANCE
ALTITUDE.)
(See MINIMUM VECTORING ALTITUDE.)
APRON− A defined area on an airport or heliport
intended to accommodate aircraft for purposes ofloading or unloading passengers or cargo, refueling,parking, or maintenance. With regard to seaplanes, a
ramp is used for access to the apron from the water.
(See ICAO term APRON.)
APRON [ICAO] − A defined area, on a land
aerodrome, intended to accommodate aircraft forpurposes of loading or unloading passengers, mail or
cargo, refueling, parking or maintenance.
ARC− The track over the ground of an aircraft flying
at a constant distance from a navigational aid byreference to distance measuring equipment (DME).
AREA CONTROL CENTER [ICAO] − An air traffic
control facility primarily responsible for ATCservices being provided IFR aircraft during the en5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−12route phase of flight. The U.S. equivalent facility is
an air route traffic control center (ARTCC).
AREA NA VIGATION (RNA V) − A method of
navigation which permits aircraft operation on anydesired flight path within the coverage of ground − or
space−based navigation aids or within the limits of
the capability of self-contained aids, or a combination
of these.
Note: Area navigation includes performance −
based navigation as well as other operations thatdo not meet the definition of performance −based
navigation.
AREA NA VIGATION (RNA V) APPROACH
CONFIGURATION:
a.STANDARD T − An RNA V approach whose
design allows direct flight to any one of three initialapproach fixes (IAF) and eliminates the need forprocedure turns. The standard design is to align theprocedure on the extended centerline with the missed
approach point (MAP) at the runway threshold, thefinal approach fix (FAF), and the initial approach/intermediate fix (IAF/IF). The other two IAFs will be
established perpendicular to the IF.
b.MODIFIED T − An RNA V approach design for
single or multiple runways where terrain oroperational constraints do not allow for the standardT. The “T” may be modified by increasing ordecreasing the angle from the corner IAF(s) to the IF
or by eliminating one or both corner IAFs.
c.STANDARD I − An RNA V approach design for
a single runway with both corner IAFs eliminated.Course reversal or radar vectoring may be required at
busy terminals with multiple runways.
d.TERMINAL ARRIV AL AREA (TAA) − The
TAA is controlled airspace established in conjunctionwith the Standard or Modified T and I RNA Vapproach configurations. In the standard TAA, thereare three areas: straight-in, left base, and right base.The arc boundaries of the three areas of the TAA arepublished portions of the approach and allow aircraft
to transition from the en route structure direct to thenearest IAF. TAAs will also eliminate or reduce
feeder routes, departure extensions, and procedure
turns or course reversal.
1.STRAIGHT-IN AREA − A 30NM arc
centered on the IF bounded by a straight lineextending through the IF perpendicular to theintermediate course.2.LEFT BASE AREA − A 30NM arc centered
on the right corner IAF. The area shares a boundarywith the straight-in area except that it extends out for
30NM from the IAF and is bounded on the other sideby a line extending from the IF through the FAF to thearc.
3.RIGHT BASE AREA − A 30NM arc centered
on the left corner IAF. The area shares a boundarywith the straight-in area except that it extends out for
30NM from the IAF and is bounded on the other sideby a line extending from the IF through the FAF to thearc.
AREA NA VIGATION (RNA V) GLOBAL
POSITIONING SYSTEM (GPS) PRECISIONRUNW AY MONITORING (PRM) APPROACH – AGPS approach, which requires vertical guidance,used in lieu of an ILS PRM approach to conductapproaches to parallel runways whose extendedcenterlines are separated by less than 4,300 feet andat least 3,000 feet, where simultaneous close parallelapproaches are permitted. Also used in lieu of an ILSPRM and/or LDA PRM approach to conductSimultaneous Offset Instrument Approach (SOIA)operations.
ARINC− An acronym for Aeronautical Radio, Inc.,
a corporation largely owned by a group of airlines.ARINC is licensed by the FCC as an aeronauticalstation and contracted by the FAA to providecommunications support for air traffic control andmeteorological services in portions of internationalairspace.
ARMY A VIATION FLIGHT INFORMATION
BULLETIN − A bulletin that provides air operation
data covering Army, National Guard, and ArmyReserve aviation activities.
ARO−
(See AIRPORT RESERVATION OFFICE.)
ARRESTING SYSTEM − A safety device consisting
of two major components, namely, engaging orcatching devices and energy absorption devices forthe purpose of arresting both tailhook and/ornontailhook-equipped aircraft. It is used to preventaircraft from overrunning runways when the aircraftcannot be stopped after landing or during abortedtakeoff. Arresting systems have various names; e.g.,arresting gear, hook device, wire barrier cable.
(See ABORT.)
(Refer to AIM.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−13ARRIVAL AIRCRAFT INTERV AL − An internally
generated program in hundredths of minutes basedupon the AAR. AAI is the desired optimum intervalbetween successive arrival aircraft over the vertex.
ARRIVAL CENTER − The ARTCC having jurisdic-
tion for the impacted airport.
ARRIVAL DELAY − A parameter which specifies a
period of time in which no aircraft will be metered for
arrival at the specified airport.
ARRIVAL SECTOR − An operational control sector
containing one or more meter fixes.
ARRIV AL SECTOR ADVISORY LIST − An
ordered list of data on arrivals displayed at thePVD/MDM of the sector which controls the meterfix.
ARRIVAL SEQUENCING PROGRAM − The auto-
mated program designed to assist in sequencingaircraft destined for the same airport.
ARRIVAL TIME− The time an aircraft touches down
on arrival.
ARSR−
(See AIR ROUTE SURVEILLANCE RADAR.)
ARTCC−
(See AIR ROUTE TRAFFIC CONTROL
CENTER.)
ARTS−
(See AUTOMATED RADAR TERMINAL
SYSTEMS.)
ASDA−
(See ACCELERATE-STOP DISTANCE
AVAILABLE.)
ASDA [ICAO] −
(See ICAO Term ACCELERATE-STOP
DISTANCE AVAILABLE.)
ASDE−
(See AIRPORT SURFACE DETECTION
EQUIPMENT.)
ASF−
(See AIRPORT STREAM FILTER.)
ASLAR−
(See AIRCRAFT SURGE LAUNCH AND
RECOVERY.)
ASP−
(See ARRIVAL SEQUENCING PROGRAM.)ASR−
(See AIRPORT SURVEILLANCE RADAR.)
ASR APPROACH −
(See SURVEILLANCE APPROACH.)
ASSOCIATED − A radar target displaying a data
block with flight identification and altitudeinformation.
(See UNASSOCIATED.)
ATC−
(See AIR TRAFFIC CONTROL.)
ATC ADVISES − Used to prefix a message of
noncontrol information when it is relayed to anaircraft by other than an air traffic controller.
(See ADVISORY.)
ATC ASSIGNED AIRSPACE − Airspace of defined
vertical/lateral limits, assigned by ATC, for thepurpose of providing air traffic segregation betweenthe specified activities being conducted within theassigned airspace and other IFR air traffic.DME FIX
(See SPECIAL USE AIRSPACE.)
ATC CLEARANCE −
(See AIR TRAFFIC CLEARANCE.)
ATC CLEARS − Used to prefix an ATC clearance
when it is relayed to an aircraft by other than an airtraffic controller.
ATC INSTRUCTIONS − Directives issued by air
traffic control for the purpose of requiring a pilot totake specific actions; e.g., “Turn left heading two five
zero,” “Go around,” “Clear the runway.”
(Refer to 14 CFR Part 91.)
ATC PREFERRED ROUTE NOTIFICATION −
EDST notification to the appropriate controller of the
need to determine if an ATC preferred route needs to
be applied, based on destination airport.
(See ROUTE ACTION NOTIFICATION.)
(See EN ROUTE DECISION SUPPORT
TOOL .)
ATC PREFERRED ROUTES − Preferred routes that
are not automatically applied by Host.
ATC REQUESTS − Used to prefix an ATC request
when it is relayed to an aircraft by other than an airtraffic controller.
ATC SECURITY SERVICES − Communications
and security tracking provided by an ATC facility insupport of the DHS, the DOD, or other Federalsecurity elements in the interest of national security.5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−14Such security services are only applicable within
designated areas. ATC security services do notinclude ATC basic radar services or flight following.
ATC SECURITY SERVICES POSITION − The
position responsible for providing ATC securityservices as defined. This position does not provideATC, IFR separation, or VFR flight followingservices, but is responsible for providing securityservices in an area comprising airspace assigned toone or more ATC operating sectors. This positionmay be combined with control positions.
ATC SECURITY TRACKING − The continuous
tracking of aircraft movement by an ATC facility insupport of the DHS, the DOD, or other securityelements for national security using radar (i.e., radar
tracking) or other means (e.g., manual tracking)without providing basic radar services (includingtraffic advisories) or other ATC services not definedin this section.
ATC SURVEILLANCE SOURCE– Used by ATC
for establishing identification, control and separation
using a target depicted on an air traffic control
facility’s video display that has met the relevant
safety standards for operational use and received
from one, or a combination, of the following
surveillance sources:
a. Radar (See RADAR)
b. ADS-B (See AUTOMATIC DEPENDENT
SURVEILLANCE −BROADCAST.)
c. WAM (See WIDE AREA MULTILATERATION)
(See INTERROGATOR.)
(See TRANSPONDER.)
(See ICAO term RADAR.)
(Refer to AIM.)
ATCAA−
(See ATC ASSIGNED AIRSPACE.)
ATCRBS −
(See RADAR.)
ATCSCC −
(See AIR TRAFFIC CONTROL SYSTEM
COMMAND CENTER.)
ATCT−
(See TOWER.)
ATD−
(See ALONG −TRACK DISTANCE.)ATIS−
(See AUTOMATIC TERMINAL INFORMATION
SERVICE.)
ATIS [ICAO] −
(See ICAO Term AUTOMATIC TERMINAL
INFORMATION SERVICE.)
ATS ROUTE [ICAO] − A specified route designed for
channeling the flow of traffic as necessary for theprovision of air traffic services.
Note: The term “ATS Route” is used to mean vari-
ously, airway, advisory route, controlled or
uncontrolled route, arrival or departure, etc.
ATTENTION ALL USERS PAGE (AAUP)- The
AAUP provides the pilot with additional information
relative to conducting a specific operation, forexample, PRM approaches and RNA V departures.
AUTOLAND APPROACH −An autoland system
aids by providing control of aircraft systems duringa precision instrument approach to at least decisionaltitude and possibly all the way to touchdown, aswell as in some cases, through the landing rollout.The autoland system is a sub-system of the autopilotsystem from which control surface managementoccurs. The aircraft autopilot sends instructions to the
autoland system and monitors the autoland systemperformance and integrity during its execution.
AUTOMATED INFORMATION TRANSFER − A
precoordinated process, specifically defined infacility directives, during which a transfer of altitude
control and/or radar identification is accomplishedwithout verbal coordination between controllersusing information communicated in a full data block.
AUTOMATED MUTUAL-ASSISTANCE VESSEL
RESCUE SYSTEM − A facility which can deliver, in
a matter of minutes, a surface picture (SURPIC) ofvessels in the area of a potential or actual search and
rescue incident, including their predicted positionsand their characteristics.
(See FAAO JO 7110.65, Para 10 −6−4, INFLIGHT
CONTINGENCIES.)
AUTOMATED PROBLEM DETECTION (APD) −
An Automation Processing capability that comparestrajectories in order to predict conflicts.
AUTOMATED PROBLEM DETECTION
BOUNDARY (APB) − The adapted distance beyond
a facilities boundary defining the airspace withinwhich EDST performs conflict detection.
(See EN ROUTE DECISION SUPPORT TOOL.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG A−15AUTOMATED PROBLEM DETECTION IN-
HIBITED AREA (APDIA) − Airspace surrounding a
terminal area within which APD is inhibited for allflights within that airspace.
AUTOMATED RADAR TERMINAL SYSTEMS
(ARTS)− A generic term for several tracking systems
included in the Terminal Automation Systems (TAS).
ARTS plus a suffix roman numeral denotes a majormodification to that system.
a.ARTS IIIA. The Radar Tracking and Beacon
Tracking Level (RT&BTL) of the modular,
programmable automated radar terminal system.ARTS IIIA detects, tracks, and predicts primary aswell as secondary radar-derived aircraft targets. Thismore sophisticated computer-driven system up-grades the existing ARTS III system by providingimproved tracking, continuous data recording, andfail-soft capabilities.
b.Common ARTS. Includes ARTS IIE, ARTS
IIIE; and ARTS IIIE with ACD (see DTAS) whichcombines functionalities of the previous ARTSsystems.
AUTOMATED WEATHER SYSTEM − Any of the
automated weather sensor platforms that collectweather data at airports and disseminate the weatherinformation via radio and/or landline. The systemscurrently consist of the Automated Surface Observ-ing System (ASOS), Automated Weather SensorSystem (AWSS) and Automated Weather Observa-tion System (AWOS).
AUTOMATED UNICOM − Provides completely
automated weather, radio check capability and airport
advisory information on an Automated UNICOMsystem. These systems offer a variety of features,typically selectable by microphone clicks, on theUNICOM frequency. Availability will be publishedin the Chart Supplement U.S. and approach charts.
AUTOMATIC ALTITUDE REPORT −
(See ALTITUDE READOUT.)
AUTOMATIC ALTITUDE REPORTING − That
function of a transponder which responds to Mode C
interrogations by transmitting the aircraft’s altitudein 100-foot increments.
AUTOMATIC CARRIER LANDING SYSTEM −
U.S. Navy final approach equipment consisting ofprecision tracking radar coupled to a computer datalink to provide continuous information to the aircraft,monitoring capability to the pilot, and a backup
approach system.
AUTOMATIC DEPENDENT SURVEILLANCE
(ADS) [ICAO] − A surveillance technique in which
aircraft automatically provide, via a data link, dataderived from on −board navigation and position
fixing systems, including aircraft identification, four
dimensional position and additional data asappropriate.
AUTOMATIC DEPENDENT SUR VEILLANCE −
BROADCAST (ADS-B) − A surveillance system in
which an aircraft or vehicle to be detected is fittedwith cooperative equipment in the form of a data link
transmitter. The aircraft or vehicle periodicallybroadcasts its GPS −derived position and other
information such as velocity over the data link, which
is received by a ground −based transmitter/receiver
(transceiver) for processing and display at an airtraffic control facility.
(See GLOBAL POSITIONING SYSTEM.)
(See GROUND −BASED TRANSCEIVER.)
AUTOMATIC DEPENDENT SUR VEILLANCE −
CONTRACT (ADS −C)− A data link position
reporting system, controlled by a ground station, that
establishes contracts with an aircraft’s avionics thatoccur automatically whenever specific events occur,or specific time intervals are reached.
AUTOMATIC DEPENDENT SURVEILLANCE-
REBROADCAST (ADS-R) is a datalink translationfunction of the ADS −B ground system required to
accommodate the two separate operating frequencies
(978 MHz and 1090 ES). The ADS −B system
receives the ADS −B messages transmitted on one
frequency and ADS −R translates and reformats the
information for rebroadcast and use on the otherfrequency. This allows ADS −B In equipped aircraft
to see nearby ADS −B Out traffic regardless of the
operating link of the other aircraft. Aircraft operating
on the same ADS −B frequency exchange information
directly and do not require the ADS −R translation
function.
AUTOMATIC DIRECTION FINDER − An aircraft
radio navigation system which senses and indicatesthe direction to a L/MF nondirectional radio beacon(NDB) ground transmitter. Direction is indicated tothe pilot as a magnetic bearing or as a relative bearingto the longitudinal axis of the aircraft depending onthe type of indicator installed in the aircraft. In certainapplications, such as military, ADF operations may5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG A−16be based on airborne and ground transmitters in the
VHF/UHF frequency spectrum.
(See BEARING.)
(See NONDIRECTIONAL BEACON.)
AUTOMATIC FLIGHT INFORMATION
SERVICE (AFIS) − ALASKA FSSs ONLY − The
continuous broadcast of recorded non −control
information at airports in Alaska where a FSSprovides local airport advisory service. The AFISbroadcast automates the repetitive transmission ofessential but routine information such as weather,wind, altimeter, favored runway, breaking action,airport NOTAMs, and other applicable information.The information is continuously broadcast over adiscrete VHF radio frequency (usually the ASOS/AWSS/AWOS frequency.)
AUTOMATIC TERMINAL INFORMATION
SERVICE − The continuous broadcast of recorded
noncontrol information in selected terminal areas. Its
purpose is to improve controller effectiveness and to
relieve frequency congestion by automating therepetitive transmission of essential but routineinformation; e.g., “Los Angeles information Alfa.One three zero zero Coordinated Universal Time.Weather, measured ceiling two thousand overcast,visibility three, haze, smoke, temperature seven one,
dew point five seven, wind two five zero at five,altimeter two niner niner six. I-L-S Runway T wo Five
Left approach in use, Runway Two Five Right closed,advise you have Alfa.”
(See ICAO term AUTOMATIC TERMINAL
INFORMATION SERVICE.)
(Refer to AIM.)
AUTOMATIC TERMINAL INFORMATION
SERVICE [ICAO]− The provision of current, routine
information to arriving and departing aircraft bymeans of continuous and repetitive broadcasts
throughout the day or a specified portion of the day.
AUTOROTA TION− A rotorcraft flight condition in
which the lifting rotor is driven entirely by action ofthe air when the rotorcraft is in motion.
a.Autorotative Landing/Touchdown Autorota-
tion. Used by a pilot to indicate that the landing willbe made without applying power to the rotor.
b.Low Level Autorotation. Commences at an
altitude well below the traffic pattern, usually below100 feet AGL and is used primarily for tacticalmilitary training.
c.180 degrees Autorotation. Initiated from a
downwind heading and is commenced well inside the
normal traffic pattern. “Go around” may not bepossible during the latter part of this maneuver.
A V AILABLE LANDING DISTANCE (ALD) − The
portion of a runway available for landing and roll-out
for aircraft cleared for LAHSO. This distance ismeasured from the landing threshold to thehold-short point.
A VIATION WEATHER SERVICE − A service
provided by the National W eather Service (NWS) and
FAA which collects and disseminates pertinentweather information for pilots, aircraft operators, and
ATC. Available aviation weather reports andforecasts are displayed at each NWS office and FAA
FSS.
(See TRANSCRIBED WEATHER BROADCAST.)
(See WEATHER ADVISORY.)
(Refer to AIM.)
AWW−
(See SEVERE WEATHER FORECAST
ALERTS.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG B−1B
BACK-TAXI − A term used by air traffic controllers
to taxi an aircraft on the runway opposite to the traffic
flow. The aircraft may be instructed to back-taxi tothe beginning of the runway or at some point beforereaching the runway end for the purpose of departure
or to exit the runway.
BASE LEG −
(See TRAFFIC PATTERN.)
BEACON −
(See AERONAUTICAL BEACON.)
(See AIRPORT ROTATING BEACON.)
(See AIRWAY BEACON.)
(See MARKER BEACON.)(See NONDIRECTIONAL BEACON.)
(See RADAR.)
BEARING − The horizontal direction to or from any
point, usually measured clockwise from true north,magnetic north, or some other reference pointthrough 360 degrees.
(See NONDIRECTIONAL BEACON.)
BELOW MINIMUMS − Weather conditions below
the minimums prescribed by regulation for theparticular action involved; e.g., landing minimums,takeoff minimums.
BLAST FENCE − A barrier that is used to divert or
dissipate jet or propeller blast.
BLAST PAD − A surface adjacent to the ends of a
runway provided to reduce the erosive effect of jetblast and propeller wash.
BLIND SPEED − The rate of departure or closing of
a target relative to the radar antenna at whichcancellation of the primary radar target by movingtarget indicator (MTI) circuits in the radar equipmentcauses a reduction or complete loss of signal.
(See ICAO term BLIND VELOCITY.)
BLIND SPOT − An area from which radio
transmissions and/or radar echoes cannot bereceived. The term is also used to describe portionsof the airport not visible from the control tower.
BLIND TRANSMISSION −
(See TRANSMITTING IN THE BLIND.)BLIND VELOCITY [ICAO] − The radial velocity of
a moving target such that the target is not seen onprimary radars fitted with certain forms of fixed echo
suppression.
BLIND ZONE−
(See BLIND SPOT.)
BLOCKED − Phraseology used to indicate that a
radio transmission has been distorted or interrupteddue to multiple simultaneous radio transmissions.
BOTTOM ALTITUDE– In reference to published
altitude restrictions on a STAR or STAR runwaytransition, the lowest altitude authorized.
BOUNDARY LIGHTS−
(See AIRPORT LIGHTING.)
BRAKING ACTION (GOOD, MEDIUM, POOR,
OR NIL) − A report of conditions on the airport
movement area providing a pilot with a degree/qual-
ity of braking that he/she might expect. Brakingaction is reported in terms of good, fair , poor, or nil.
Effective October 1, 2016, Braking Action will be
categorized in the following terms: Good, Good to
Medium, Medium, Medium to Poor, Poor, and Nil.
(See RUNWAY CONDITION READING.)
BRAKING ACTION ADVISORIES − When tower
controllers have received runway braking actionreports which include the terms “fair,” “poor,” or“nil,” or whenever weather conditions are conducive
to deteriorating or rapidly changing runway brakingconditions, the tower will include on the ATISbroadcast the statement, “Braking action advisories
are in effect” on the ATIS broadcast. During the time
braking action advisories are in ef fect, ATC will issue
the latest braking action report for the runway in use
to each arriving and departing aircraft. Pilots should
be prepared for deteriorating braking conditions and
should req uest current runway condition information
if not volunteered by controllers. Pilots should also
be prepared to provide a descriptive runway
condition report to controllers after landing.
Effective October 1, 2016, the term “fair” will be
replaced with “medium”.
BREAKOUT − A technique to direct aircraft out of
the approach stream. In the context of simultaneous(independent) parallel operations, a breakout is used5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG B−2to direct threatened aircraft away from a deviating
aircraft.
BROADCAST − Transmission of information for
which an acknowledgement is not expected.
(See ICAO term BROADCAST.)BROADCAST [ICAO]− A transmission of informa-
tion relating to air navigation that is not addressed toa specific station or stations.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG C−1C
CALCULATED LANDING TIME − A term that may
be used in place of tentative or actual calculatedlanding time, whichever applies.
CALL FOR RELEASE − Wherein the overlying
ARTCC requires a terminal facility to initiate verbal
coordination to secure ARTCC approval for releaseof a departure into the en route environment.
CALL UP − Initial voice contact between a facility
and an aircraft, using the identification of the unitbeing called and the unit initiating the call.
(Refer to AIM.)
CANADIAN MINIMUM NA VIGATION PERFOR-
MANCE SPECIFICATION AIRSPACE − That
portion of Canadian domestic airspace within whichMNPS separation may be applied.
CARDINAL ALTITUDES − “Odd” or “Even”
thousand-foot altitudes or flight levels; e.g., 5,000,6,000, 7,000, FL 250, FL 260, FL 270.
(See ALTITUDE.)
(See FLIGHT LEVEL.)
CARDINAL FLIGHT LEVELS −
(See CARDINAL ALTITUDES.)
CAT−
(See CLEAR-AIR TURBULENCE.)
CATCH POINT − A fix/waypoint that serves as a
transition point from the high altitude waypointnavigation structure to an arrival procedure (STAR)or the low altitude ground −based navigation
structure.
CEILING − The heights above the earth’s surface of
the lowest layer of clouds or obscuring phenomenathat is reported as “broken,” “overcast,” or“obscuration,” and not classified as “thin” or“partial.”
(See ICAO term CEILING.)
CEILING [ICAO] − The height above the ground or
water of the base of the lowest layer of cloud below6,000 meters (20,000 feet) covering more than halfthe sky.
CENRAP −
(See CENTER RADAR ARTS
PRESENTATION/PROCESSING.)CENRAP-PLUS −
(See CENTER RADAR ARTS
PRESENTATION/PROCESSING-PLUS.)
CENTER −
(See AIR ROUTE TRAFFIC CONTROL
CENTER.)
CENTER’S AREA − The specified airspace within
which an air route traffic control center (ARTCC)provides air traffic control and advisory service.
(See AIR ROUTE TRAFFIC CONTROL
CENTER.)
(Refer to AIM.)
CENTER RADAR ARTS PRESENTATION/
PROCESSING − A computer program developed to
provide a back-up system for airport surveillanceradar in the event of a failure or malfunction. Theprogram uses air route traffic control center radar for
the processing and presentation of data on the ARTSIIA or IIIA displays.
CENTER RADAR ARTS PRESENTATION/
PROCESSING-PLUS − A computer program
developed to provide a back-up system for airportsurveillance radar in the event of a terminal secondary
radar system failure. The program uses a combinationof Air Route Traffic Control Center Radar andterminal airport surveillance radar primary targetsdisplayed simultaneously for the processing andpresentation of data on the ARTS IIA or IIIAdisplays.
CENTER TRACON AUTOMATION SYSTEM
(CTAS)− A computerized set of programs designed
to aid Air Route Traffic Control Centers andTRACONs in the management and control of airtraffic.
CENTER WEATHER ADVISORY − An unsched-
uled weather advisory issued by Center WeatherService Unit meteorologists for ATC use to alertpilots of existing or anticipated adverse weatherconditions within the next 2 hours. A CWA maymodify or redefine a SIGMET.
(See AWW.)
(See AIRMET.)(See CONVECTIVE SIGMET.)(See SIGMET.)
(Refer to AIM.)
Pilot/Controller Glossary 12/10/15
PCG C−2CENTRAL EAST PACIFIC− An organized route
system between the U.S. West Coast and Hawaii.
CEP−
(See CENTRAL EAST PACIFIC.)
CERAP−
(See COMBINED CENTER-RAPCON.)
CERTIFIED TOWER RADAR DISPLAY (CTRD)−
A FAA radar display certified for use in the NAS.
CFR−
(See CALL FOR RELEASE.)
CHAFF− Thin, narrow metallic reflectors of various
lengths and frequency responses, used to reflect radar
energy. These reflectors when dropped from aircraftand allowed to drift downward result in large targetson the radar display.
CHART SUPPLEMENT U.S. − A publication
designed primarily as a pilot’s operational manual
containing all airports, seaplane bases, and heliports
open to the public including communications data,
navigational facilities, and certain special notices and
procedures. This publication is issued in seven
volumes according to geographical area.
CHARTED VFR FLYWAYS − Charted VFR Fly-
ways are flight paths recommended for use to bypass
areas heavily traversed by large turbine-poweredaircraft. Pilot compliance with recommendedflyways and associated altitudes is strictly voluntary.
VFR Flyway Planning charts are published on theback of existing VFR Terminal Area charts.
CHARTED VISUAL FLIGHT PROCEDURE
APPROACH − An approach conducted while
operating on an instrument flight rules (IFR) flightplan which authorizes the pilot of an aircraft toproceed visually and clear of clouds to the airport via
visual landmarks and other information depicted ona charted visual flight procedure. This approach mustbe authorized and under the control of the appropriate
air traffic control facility. Weather minimumsrequired are depicted on the chart.
CHASE− An aircraft flown in proximity to another
aircraft normally to observe its performance duringtraining or testing.
CHASE AIRCRAFT −
(See CHASE.)
CIRCLE-TO-LAND MANEUVER − A maneuver
initiated by the pilot to align the aircraft with arunway for landing when a straight-in landing from
an instrument approach is not possible or is notdesirable. At tower controlled airports, this maneuver
is made only after ATC authorization has beenobtained and the pilot has established required visual
reference to the airport.
(See CIRCLE TO RUNWAY.)
(See LANDING MINIMUMS.)(Refer to AIM.)
CIRCLE TO RUNWAY (RUNWAY NUMBER) −
Used by ATC to inform the pilot that he/she mustcircle to land because the runway in use is other than
the runway aligned with the instrument approachprocedure. When the direction of the circlingmaneuver in relation to the airport/runway isrequired, the controller will state the direction (eightcardinal compass points) and specify a left or rightdownwind or base leg as appropriate; e.g., “ClearedVOR Runway Three Six Approach circle to RunwayTwo Two,” or “Circle northwest of the airport for aright downwind to Runway Two Two.”
(See CIRCLE-TO-LAND MANEUVER.)
(See LANDING MINIMUMS.)(Refer to AIM.)
CIRCLING APPROACH −
(See CIRCLE-TO-LAND MANEUVER.)
CIRCLING MANEUVER −
(See CIRCLE-TO-LAND MANEUVER.)
CIRCLING MINIMA −
(See LANDING MINIMUMS.)
CLASS A AIRSPACE −
(See CONTROLLED AIRSPACE.)
CLASS B AIRSPACE −
(See CONTROLLED AIRSPACE.)
CLASS C AIRSPACE −
(See CONTROLLED AIRSPACE.)
CLASS D AIRSPACE −
(See CONTROLLED AIRSPACE.)
CLASS E AIRSPACE −
(See CONTROLLED AIRSPACE.)
CLASS G AIRSPACE − That airspace not designated
as Class A, B, C, D or E.
CLEAR AIR TURBULENCE (CAT) − Turbulence
encountered in air where no clouds are present. Thisterm is commonly applied to high-level turbulencePilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG C−3associated with wind shear. CA T is often encountered
in the vicinity of the jet stream.
(See WIND SHEAR.)
(See JET STREAM.)
CLEAR OF THE RUNWAY −
a.Taxiing aircraft, which is approaching a
runway, is clear of the runway when all parts of theaircraft are held short of the applicable runwayholding position marking.
b.A pilot or controller may consider an aircraft,
which is exiting or crossing a runway, to be clear ofthe runway when all parts of the aircraft are beyondthe runway edge and there are no restrictions to itscontinued movement beyond the applicable runwayholding position marking.
c.Pilots and controllers shall exercise good
judgement to ensure that adequate separation existsbetween all aircraft on runways and taxiways atairports with inadequate runway edge lines orholding position markings.
CLEARANCE −
(See AIR TRAFFIC CLEARANCE.)
CLEARANCE LIMIT− The fix, point, or location to
which an aircraft is cleared when issued an air traffic
clearance.
(See ICAO term CLEARANCE LIMIT.)
CLEARANCE LIMIT [ICAO] − The point to which
an aircraft is granted an air traffic control clearance.
CLEARANCE VOID IF NOT OFF BY (TIME) −
Used by ATC to advise an aircraft that the departureclearance is automatically canceled if takeoff is not
made prior to a specified time. The pilot must obtain
a new clearance or cancel his/her IFR flight plan if notoff by the specified time.
(See ICAO term CLEARANCE VOID TIME.)
CLEARANCE VOID TIME [ICAO] − A time
specified by an air traffic control unit at which aclearance ceases to be valid unless the aircraftconcerned has already taken action to complytherewith.
CLEARED APPROACH − ATC authorization for an
aircraft to execute any standard or special instrumentapproach procedure for that airport. Normally, anaircraft will be cleared for a specific instrument
approach procedure.
(See CLEARED (Type of) APPROACH.)
(See INSTRUMENT APPROACH
PROCEDURE.)
(Refer to 14 CFR Part 91.)(Refer to AIM.)
CLEARED (T ype of) APPROACH − ATC authoriza-
tion for an aircraft to execute a specific instrument
approach procedure to an airport; e.g., “Cleared ILS
Runway Three Six Approach.”
(See APPROACH CLEARANCE.)
(See INSTRUMENT APPROACH
PROCEDURE.)
(Refer to 14 CFR Part 91.)(Refer to AIM.)
CLEARED AS FILED− Means the aircraft is cleared
to proceed in accordance with the route of flight filedin the flight plan. This clearance does not include thealtitude, DP, or DP Transition.
(See REQUEST FULL ROUTE CLEARANCE.)
(Refer to AIM.)
CLEARED FOR TAKEOFF − ATC authorization
for an aircraft to depart. It is predicated on knowntraffic and known physical airport conditions.
CLEARED FOR THE OPTION − ATC authoriza-
tion for an aircraft to make a touch-and-go, lowapproach, missed approach, stop and go, or full stoplanding at the discretion of the pilot. It is normallyused in training so that an instructor can evaluate astudent’s performance under changing situations.
(See OPTION APPROACH.)
(Refer to AIM.)
CLEARED THROUGH − ATC authorization for an
aircraft to make intermediate stops at specifiedairports without refiling a flight plan while en routeto the clearance limit.
CLEARED TO LAND − ATC authorization for an
aircraft to land. It is predicated on known traffic andknown physical airport conditions.
CLEARWAY − An area beyond the takeoff runway
under the control of airport authorities within whichterrain or fixed obstacles may not extend abovespecified limits. These areas may be required forcertain turbine-powered operations and the size andupward slope of the clearway will differ depending on
when the aircraft was certificated.
(Refer to 14 CFR Part 1.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG C−4CLIMB TO VFR − ATC authorization for an aircraft
to climb to VFR conditions within Class B, C, D, andE surface areas when the only weather limitation isrestricted visibility. The aircraft must remain clear of
clouds while climbing to VFR.
(See SPECIAL VFR CONDITIONS.)
(Refer to AIM.)
CLIMBOUT − That portion of flight operation
between takeoff and the initial cruising altitude.
CLIMB VIA– An abbreviated ATC clearance that
requires compliance with the procedure lateral path,associated speed restrictions, and altitude restrictions
along the cleared route or procedure.
CLOSE PARALLEL RUNWAYS − Two parallel
runways whose extended centerlines are separated by
less than 4,300 feet and at least 3000 feet (750 feet forSOIA operations) that are authorized to conductsimultaneous independent approach operations.PRM and simultaneous close parallel appear inapproach title. Dual communications, special pilottraining, an Attention All Users Page (AAUP), NTZmonitoring by displays that have aural and visualalerting algorithms are required. A high update ratesurveillance sensor is required for certain runway orapproach course spacing.
CLOSED RUNWAY − A runway that is unusable for
aircraft operations. Only the airport management/military operations office can close a runway.
CLOSED TRAFFIC − Successive operations involv-
ing takeoffs and landings or low approaches wherethe aircraft does not exit the traffic pattern.
CLOUD− A cloud is a visible accumulation of
minute water droplets and/or ice particles in theatmosphere above the Earth’s surface. Cloud differsfrom ground fog, fog, or ice fog only in that the latter
are, by definition, in contact with the Earth’s surface.
CLT−
(See CALCULATED LANDING TIME.)
CLUTTER − In radar operations, clutter refers to the
reception and visual display of radar returns causedby precipitation, chaff, terrain, numerous aircrafttargets, or other phenomena. Such returns may limitor preclude ATC from providing services based on
radar.
(See CHAFF.)
(See GROUND CLUTTER.)(See PRECIPITATION.)(See TARGET.)(See ICAO term RADAR CLUTTER.)
CMNPS−
(See CANADIAN MINIMUM NAVIGATION
PERFORMANCE SPECIFICATION AIRSPACE.)
COASTAL FIX − A navigation aid or intersection
where an aircraft transitions between the domesticroute structure and the oceanic route structure.
CODES− The number assigned to a particular
multiple pulse reply signal transmitted by atransponder.
(See DISCRETE CODE.)
COLD TEMPERATURE COMPENSATION − An
action on the part of the pilot to adjust an aircraft’s
indicated altitude due to the effect of cold
temperatures on true altitude above terrain versus
aircraft indicated altitude. The amount of
compensation required increases at a greater rate with
a decrease in temperature and increase in height
above the reporting station.
COLLABORATIVE TRAJECTORY OPTIONS
PROGRAM (CTOP)- CTOP is a traffic management
program administered by the Air Traffic ControlSystem Command Center (ATCSCC) that managesdemand through constrained airspace, while consid-ering operator preference with regard to both routeand delay as defined in a Trajectory Options Set(TOS).
COMBINED CENTER-RAPCON − An air traffic
facility which combines the functions of an ARTCCand a radar approach control facility.
(See AIR ROUTE TRAFFIC CONTROL
CENTER.)
(See RADAR APPROACH CONTROL
FACILITY.)
COMMON POINT − A significant point over which
two or more aircraft will report passing or havereported passing before proceeding on the same ordiverging tracks. To establish/maintain longitudinalseparation, a controller may determine a commonpoint not originally in the aircraft’s flight plan andthen clear the aircraft to fly over the point.
(See SIGNIFICANT POINT.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG C−5COMMON POR TION−
(See COMMON ROUTE.)
COMMON ROUTE − That segment of a North
American Route between the inland navigationfacility and the coastal fix.
OR
COMMON ROUTE − Typically the portion of a
RNA V STAR between the en route transition endpoint and the runway transition start point; however,the common route may only consist of a single pointthat joins the en route and runway transitions.
COMMON TRAFFIC ADVISORY FREQUENCY
(CTAF)− A frequency designed for the purpose of
carrying out airport advisory practices whileoperating to or from an airport without an operatingcontrol tower. The CTAF may be a UNICOM,Multicom, FSS, or tower frequency and is identified
in appropriate aeronautical publications.
(See DESIGNATED COMMON TRAFFIC
ADVISORY FREQUENCY (CTAF) AREA.)
(Refer to AC 90-42, Traffic Advisory Practices at
Airports Without Operating Control Towers.)
COMPASS LOCATOR − A low power, low or
medium frequency (L/MF) radio beacon installed atthe site of the outer or middle marker of an instrumentlanding system (ILS). It can be used for navigation at
distances of approximately 15 miles or as authorized
in the approach procedure.
a.Outer Compass Locator (LOM) − A compass
locator installed at the site of the outer marker of aninstrument landing system.
(See OUTER MARKER.)
b.Middle Compass Locator (LMM) − A compass
locator installed at the site of the middle marker of an
instrument landing system.
(See MIDDLE MARKER.)
(See ICAO term LOCATOR.)
COMPASS ROSE − A circle, graduated in degrees,
printed on some charts or marked on the ground at an
airport. It is used as a reference to either true ormagnetic direction.
COMPLY WITH RESTRICTIONS − An ATC
instruction that requires an aircraft being vectoredback onto an arrival or departure procedure to comply
with all altitude and/or speed restrictions depicted on
the procedure. This term may be used in lieu ofrepeating each remaining restriction that appears on
the procedure.
COMPOSITE FL IGHT PLAN − A flight plan which
specifies VFR operation for one portion of flight and
IFR for another portion. It is used primarily inmilitary operations.
(Refer to AIM.)
COMPOSITE ROUTE SYSTEM − An organized
oceanic route structure, incorporating reduced lateral
spacing between routes, in which compositeseparation is authorized.
COMPOSITE SEPARA TION− A method of separat-
ing aircraft in a composite route system where, bymanagement of route and altitude assignments, acombination of half the lateral minimum specified for
the area concerned and half the vertical minimum is
applied.
COMPULSORY REPORTING POINTS − Reporting
points which must be reported to ATC. They aredesignated on aeronautical charts by solid triangles or
filed in a flight plan as fixes selected to define directroutes. These points are geographical locationswhich are defined by navigation aids/fixes. Pilotsshould discontinue position reporting over compul-sory reporting points when informed by ATC thattheir aircraft is in “radar contact.”
CONFIDENCE MANEUVER − A confidence man-
euver consists of one or more turns, a climb ordescent, or other maneuver to determine if the pilotin command (PIC) is able to receive and comply withATC instructions.
CONFLICT ALERT− A function of certain air traffic
control automated systems designed to alert radarcontrollers to existing or pending situations between
tracked targets (known IFR or VFR aircraft) thatrequire his/her immediate attention/action.
(See MODE C INTRUDER ALERT.)
CONFLICT RESOLUTION − The resolution of
potential conflictions between aircraft that are radaridentified and in communication with ATC byensuring that radar targets do not touch. Pertinenttraffic advisories shall be issued when this procedure
is applied.
Note: This procedure shall not be provided utilizing
mosaic radar systems.
CONFORMANCE − The condition established when
an aircraft’s actual position is within the conformanceregion constructed around that aircraft at its position,5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG C−6according to the trajectory associated with the
aircraft’s Current Plan.
CONFORMANCE REGION − A volume, bounded
laterally, vertically, and longitudinally, within whichan aircraft must be at a given time in order to be inconformance with the Current Plan Trajectory for that
aircraft. At a given time, the conformance region isdetermined by the simultaneous application of thelateral, vertical, and longitudinal conformancebounds for the aircraft at the position defined by time
and aircraft’s trajectory.
CONSOLAN − A low frequency, long-distance
NA V AID used principally for transoceanic naviga-tions.
CONTACT −
a.Establish communication with (followed by the
name of the facility and, if appropriate, the frequency
to be used).
b.A flight condition wherein the pilot ascertains
the attitude of his/her aircraft and navigates by visualreference to the surface.
(See CONTACT APPROACH.)
(See RADAR CONTACT.)
CONTACT APPROACH − An approach wherein an
aircraft on an IFR flight plan, having an air trafficcontrol authorization, operating clear of clouds withat least 1 mile flight visibility and a reasonableexpectation of continuing to the destination airport in
those conditions, may deviate from the instrumentapproach procedure and proceed to the destinationairport by visual reference to the surface. Thisapproach will only be authorized when requested bythe pilot and the reported ground visibility at thedestination airport is at least 1 statute mile.
(Refer to AIM.)
CONTAMINATED RUNWAY − A runway is
considered contaminated whenever standing water,ice, snow, slush, frost in any form, heavy rubber, orother substances are present. A runway is contami-nated with respect to rubber deposits or otherfriction-degrading substances when the averagefriction value for any 500-foot segment of the runway
within the ALD fails below the recommendedminimum friction level and the average friction value
in the adjacent 500-foot segments falls below themaintenance planning friction level.CONTERMINOUS U.S. − The 48 adjoining States
and the District of Columbia.
CONTINENTAL UNITED STATES − The 49 States
located on the continent of North America and theDistrict of Columbia.
CONTINUE − When used as a control instruction
should be followed by another word or wordsclarifying what is expected of the pilot. Example:“continue taxi,” “continue descent,” “continueinbound,” etc.
CONTROL AREA [ICAO] − A controlled airspace
extending upwards from a specified limit above theearth.
CONTROL SECTOR − An airspace area of defined
horizontal and vertical dimensions for which acontroller or group of controllers has air trafficcontrol responsibility, normally within an air routetraffic control center or an approach control facility.Sectors are established based on predominant trafficflows, altitude strata, and controller workload.Pilot-communications during operations within asector are normally maintained on discrete frequen-cies assigned to the sector.
(See DISCRETE FREQUENCY.)
CONTROL SLASH − A radar beacon slash repre-
senting the actual position of the associated aircraft.Normally, the control slash is the one closest to theinterrogating radar beacon site. When ARTCC radaris operating in narrowband (digitized) mode, thecontrol slash is converted to a target symbol.
CONTROLLED AIRSPACE − An airspace of
defined dimensions within which air traffic controlservice is provided to IFR flights and to VFR flightsin accordance with the airspace classification.
a.Controlled airspace is a generic term that covers
Class A, Class B, Class C, Class D, and Class Eairspace.
b.Controlled airspace is also that airspace within
which all aircraft operators are subject to certain pilot
qualifications, operating rules, and equipmentrequirements in 14 CFR Part 91 (for specificoperating requirements, please refer to 14 CFRPart 91). For IFR operations in any class of controlled
airspace, a pilot must file an IFR flight plan andreceive an appropriate ATC clearance. Each Class B,
Class C, and Class D airspace area designated for anairport contains at least one primary airport aroundPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG C−7which the airspace is designated (for specific
designations and descriptions of the airspace classes,
please refer to 14 CFR Part 71).
c.Controlled airspace in the United States is
designated as follows:
1.CLASS A − Generally, that airspace from
18,000 feet MSL up to and including FL 600,including the airspace overlying the waters within 12
nautical miles of the coast of the 48 contiguous Statesand Alaska. Unless otherwise authorized, all personsmust operate their aircraft under IFR.
2.CLASS B − Generally, that airspace from the
surface to 10,000 feet MSL surrounding the nation’sbusiest airports in terms of airport operations orpassenger enplanements. The configuration of eachClass B airspace area is individually tailored andconsists of a surface area and two or more layers(some Class B airspaces areas resemble upside-down
wedding cakes), and is designed to contain allpublished instrument procedures once an aircraftenters the airspace. An ATC clearance is required for
all aircraft to operate in the area, and all aircraft thatare so cleared receive separation services within theairspace. The cloud clearance requirement for VFRoperations is “clear of clouds.”
3.CLASS C − Generally, that airspace from the
surface to 4,000 feet above the airport elevation(charted in MSL) surrounding those airports thathave an operational control tower, are serviced by aradar approach control, and that have a certainnumber of IFR operations or passenger enplane-ments. Although the configuration of each Class Carea is individually tailored, the airspace usuallyconsists of a surface area with a 5 nautical mile (NM)
radius, a circle with a 10NM radius that extends no
lower than 1,200 feet up to 4,000 feet above theairport elevation and an outer area that is not charted.
Each person must establish two-way radio commu-nications with the ATC facility providing air trafficservices prior to entering the airspace and thereaftermaintain those communications while within theairspace. VFR aircraft are only separated from IFRaircraft within the airspace.
(See OUTER AREA.)
4.CLASS D − Generally, that airspace from the
surface to 2,500 feet above the airport elevation(charted in MSL) surrounding those airports thathave an operational control tower. The configurationof each Class D airspace area is individually tailoredand when instrument procedures are published, the
airspace will normally be designed to contain theprocedures. Arrival extensions for instrumentapproach procedures may be Class D or Class Eairspace. Unless otherwise authorized, each personmust establish two-way radio communications withthe A TC facility providing air traffic services prior toentering the airspace and thereafter maintain thosecommunications while in the airspace. No separation
services are provided to VFR aircraft.
5.CLASS E − Generally, if the airspace is not
Class A, Class B, Class C, or Class D, and it iscontrolled airspace, it is Class E airspace. Class Eairspace extends upward from either the surface or adesignated altitude to the overlying or adj acent
controlled airspace. When designated as a surfacearea, the airspace will be configured to contain allinstrument procedures. Also in this class are Federal
airways, airspace beginning at either 700 or 1,200feet AGL used to transition to/from the terminal or en
route environment, en route domestic, and offshoreairspace areas designated below 18,000 feet MSL.Unless designated at a lower altitude, Class Eairspace begins at 14,500 MSL over the UnitedStates, including that airspace overlying the waterswithin 12 nautical miles of the coast of the 48contiguous States and Alaska, up to, but notincluding 18,000 feet MSL, and the airspace aboveFL 600.
CONTROLLED AIRSPACE [ICAO] − An airspace
of defined dimensions within which air traffic controlservice is provided to IFR flights and to VFR flightsin accordance with the airspace classification.
Note: Controlled airspace is a generic term which
covers ATS airspace Classes A, B, C, D, and E.
CONTROLLED TIME OF ARRIV AL − Arrival time
assigned during a Traf fic Management Program. This
time may be modified due to adjustments or useroptions.
CONTROLLER −
(See AIR TRAFFIC CONTROL SPECIALIST.)
CONTROLLER [ICAO] − A person authorized to
provide air traffic control services.
CONTROLLER PILOT DATA LINK
COMMUNICATIONS (CPDLC) − A two−way
digital communications system that conveys textualair traffic control messages between controllers andpilots using ground or satellite-based radio relaystations.5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG C−8CONVECTIVE SIGMET − A weather advisory
concerning convective weather significant to thesafety of all aircraft. Convective SIGMETs are issued
for tornadoes, lines of thunderstorms, embeddedthunderstorms of any intensity level, areas ofthunderstorms greater than or equal to VIP level 4with an area coverage of
4/10 (40%) or more, and hail
3/4 inch or greater.
(See AIRMET.)
(See AWW.)(See CWA.)(See SIGMET.)
(Refer to AIM.)
CONVECTIVE SIGNIFICANT METEOROLOG-
ICAL INFORMA TION−
(See CONVECTIVE SIGMET.)
COORDINATES − The intersection of lines of
reference, usually expressed in degrees/minutes/seconds of latitude and longitude, used to determineposition or location.
COORDINATION FIX − The fix in relation to which
facilities will handoff, transfer control of an aircraft,or coordinate flight progress data. For terminalfacilities, it may also serve as a clearance for arriving
aircraft.
COPTER −
(See HELICOPTER.)
CORRECTION − An error has been made in the
transmission and the correct version follows.
COUPLED APPROACH − An instrument approach
performed by the aircraft autopilot, and/or visuallydepicted on the flight director, which is receivingposition inf ormation and/or steering commands from
onboard navigational equipment. In general, coupled
non-precision approaches must be flown manually(autopilot disengaged) at altitudes lower than 50 feet
AGL below the minimum descent altitude, andcoupled precision approaches must be flownmanually (autopilot disengaged) below 50 feet AGL
unless authorized to conduct autoland operations.Coupled instrument approaches are commonly flown
to the allowable IFR weather minima established bythe operator or PIC, or flown VFR for training andsafety.
COURSE −a.The intended direction of flight in the horizontal
plane measured in degrees from north.
b.The ILS localizer signal pattern usually
specified as the front course or the back course.
(See BEARING.)
(See INSTRUMENT LANDING SYSTEM.)(See RADIAL.)
CPDLC−
(See CONTROLLER PILOT DATA LINK
COMMUNICATIONS.)
CPL [ICAO] −
(See ICAO term CURRENT FLIGHT PLAN.)
CRITICAL ENGINE − The engine which, upon
failure, would most adversely affect the performance
or handling qualities of an aircraft.
CROSS (FIX) AT (ALTITUDE) − Used by ATC
when a specific altitude restriction at a specified fixis required.
CROSS (FIX) AT OR ABOVE (AL TITUDE) − Used
by ATC when an altitude restriction at a specified fixis required. It does not prohibit the aircraft from
crossing the fix at a higher altitude than specified;
however, the higher altitude may not be one that will
violate a succeeding altitude restriction or altitudeassignment.
(See ALTITUDE RESTRICTION.)
(Refer to AIM.)
CROSS (FIX) AT OR BELOW (ALTITUDE) −
Used by ATC when a maximum crossing altitude ata specific fix is required. It does not prohibit theaircraft from crossing the fix at a lower altitude;however, it must be at or above the minimum IFRaltitude.
(See ALTITUDE RESTRICTION.)
(See MINIMUM IFR ALTITUDES.)
(Refer to 14 CFR Part 91.)
CROSSWIND −
a.When used concerning the traffic pattern, the
word means “crosswind leg.”
(See TRAFFIC PATTERN.)
b.When used concerning wind conditions, the
word means a wind not parallel to the runway or thepath of an aircraft.
(See CROSSWIND COMPONENT.)
CROSSWIND COMPONENT − The wind compo-
nent measured in knots at 90 degrees to thelongitudinal axis of the runway.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG C−9CRUISE− Used in an ATC clearance to authorize a
pilot to conduct flight at any altitude from theminimum IFR altitude up to and including thealtitude specified in the clearance. The pilot maylevel off at any intermediate altitude within this block
of airspace. Climb/descent within the block is to bemade at the discretion of the pilot. However, once the
pilot starts descent and verbally reports leaving analtitude in the block, he/she may not return to thataltitude without additional ATC clearance. Further, it
is approval for the pilot to proceed to and make anapproach at destination airport and can be used inconjunction with:
a.An airport clearance limit at locations with a
standard/special instrument approach procedure. The
CFRs require that if an instrument letdown to anairport is necessary, the pilot shall make the letdownin accordance with a standard/special instrumentapproach procedure for that airport, or
b.An airport clearance limit at locations that are
within/below/outside controlled airspace and with-out a standard/special instrument approachprocedure. Such a clearance is NOT AUTHORIZA-TION for the pilot to descend under IFR conditionsbelow the applicable minimum IFR altitude nor does
it imply that ATC is exercising control over aircraftin Class G airspace; however, it provides a means forthe aircraft to proceed to destination airport, descend,and land in accordance with applicable CFRsgoverning VFR flight operations. Also, this provides
search and rescue protection until such time as theIFR flight plan is closed.
(See INSTRUMENT APPROACH
PROCEDURE.)
CRUISE CLIMB − A climb technique employed by
aircraft, usually at a constant power setting, resulting
in an increase of altitude as the aircraft weightdecreases.
CRUISING ALTITUDE − An altitude or flight level
maintained during en route level flight. This is aconstant altitude and should not be confused with acruise clearance.
(See ALTITUDE.)
(See ICAO term CRUISING LEVEL.)CRUISING LEVEL −
(See CRUISING ALTITUDE.)
CRUISING LEVEL [ICAO] − A level maintained
during a significant portion of a flight.
CT MESSAGE − An EDCT time generated by the
ATCSCC to regulate traffic at arrival airports.Normally, a CT message is automatically transferred
from the traffic management system computer to theNAS en route computer and appears as an EDCT. Inthe event of a communication failure between thetraffic management system computer and the NAS,the CT message can be manually entered by the TMCat the en route facility.
CTA−
(See CONTROLLED TIME OF ARRIVAL.)
(See ICAO term CONTROL AREA.)
CTAF−
(See COMMON TRAFFIC ADVISORY
FREQUENCY.)
CTAS−
(See CENTER TRACON AUTOMATION
SYSTEM.)
CTOP−
(See COLLABORATIVE TRAJECTORY
OPTIONS PROGRAM)
CTRD−
(See CERTIFIED TOWER RADAR DISPLAY.)
CURRENT FLIGHT PLAN [ICAO] − The flight
plan, including changes, if any, brought about bysubsequent clearances.
CURRENT PLAN − The ATC clearance the aircraft
has received and is expected to fly.
CVFP APPROACH −
(See CHARTED VISUAL FLIGHT PROCEDURE
APPROACH.)
CWA−
(See CENTER WEATHER ADVISORY and
WEATHER ADVISORY.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary12/10/15
PCG D−1D
D-ATIS−
(See DIGITAL-AUTOMATIC TERMINAL
INFORMATION SERVICE .)
DA [ICAO] −
(See ICAO Term DECISION
ALTITUDE/DECISION HEIGHT.)
DAIR−
(See DIRECT ALTITUDE AND IDENTITY
READOUT.)
DANGER AREA [ICAO] − An airspace of defined
dimensions within which activities dangerous to theflight of aircraft may exist at specified times.
Note: The term “Danger Area” is not used in
reference to areas within the United States or any
of its possessions or territories.
DAS−
(See DELAY ASSIGNMENT .)
DATA BLOCK −
(See ALPHANUMERIC DISPLAY.)
DEAD RECKONING − Dead reckoning, as applied
to flying, is the navigation of an airplane solely bymeans of computations based on airspeed, course,heading, wind direction, and speed, groundspeed,and elapsed time.
DECISION ALTITUDE/DECISION HEIGHT
[ICAO Annex 6]- A specified altitude or height (A/H)
in the precision approach at which a missed approachmust be initiated if the required visual reference tocontinue the approach has not been established. 1. Decision altitude (DA) is referenced to mean sealevel and decision height (DH) is referenced to thethreshold elevation. 2. Category II and III minima are expressed as a DHand not a DA. Minima is assessed by reference to aradio altimeter and not a barometric altimeter, which
makes the minima a DH. 3. The required visual reference means that section ofthe visual aids or of the approach area which shouldhave been in view for sufficient time for the pilot tohave made an assessment of the aircraft position andrate of change of position, in relation to the desiredflight path. Decision altitude (DA) - A specified altitude (meansea level (MSL)) on an instrument approach
procedure (ILS, GLS, vertically guided RNA V) atwhich the pilot must decide whether to continue theapproach or initiate an immediate missed approach if
the pilot does not see the required visual references.
DECISION HEIGHT− With respect to the operation
of aircraft, means the height at which a decision must
be made during an ILS or PAR instrument approachto either continue the approach or to execute a missedapproach.
(See ICAO term DECISION
ALTITUDE/DECISION HEIGHT.)
DECODER − The device used to decipher signals
received from ATCRBS transponders to effect theirdisplay as select codes.
(See CODES.)
(See RADAR.)
DEFENSE AREA- Any airspace of the contiguous
United States that is not an ADIZ in which the control
of aircraft is required for reasons of national security.
DEFENSE VISUAL FLIGHT RULES − Rules
applicable to flights within an ADIZ conducted under
the visual flight rules in 14 CFR Part 91.
(See AIR DEFENSE IDENTIFICATION ZONE.)
(Refer to 14 CFR Part 91.)
(Refer to 14 CFR Part 99.)
DELAY ASSIGNMENT (DAS) − Delays are distrib-
uted to aircraft based on the traffic managementprogram parameters. The delay assignment iscalculated in 15 −minute increments and appears as a
table in Traffic Flow Management System (TFMS).
DELAY INDEFINITE (REASON IF KNOWN)
EXPECT FUR THER CLEARANCE (TIME) − Used
by ATC to inform a pilot when an accurate estimateof the delay time and the reason for the delay cannotimmediately be determined; e.g., a disabled aircrafton the runway, terminal or center area saturation,weather below landing minimums, etc.
(See EXPECT FURTHER CLEARANCE (TIME).)
DELAY TIME − The amount of time that the arrival
must lose to cross the meter fix at the assigned meter
fix time. This is the difference between ACLT andVTA.
Pilot/Controller Glossary 12/10/15
PCG D−2DEPARTURE CENTER − The ARTCC having
jurisdiction for the airspace that generates a flight tothe impacted airport.
DEPARTURE CONTROL − A function of an
approach control facility providing air traffic control
service for departing IFR and, under certainconditions, VFR aircraft.
(See APPROACH CONTROL FACILITY.)
(Refer to AIM.)
DEPARTURE SEQUENCING PROGRAM − A
program designed to assist in achieving a specifiedinterval over a common point for departures.
DEPARTURE TIME − The time an aircraft becomes
airborne.
DESCEND VIA– An abbreviated A TC clearance that
requires compliance with a published procedure
lateral path and associated speed restrictions andprovides a pilot-discretion descent to comply withpublished altitude restrictions.
DESCENT SPEED ADJUSTMENTS − Speed decel-
eration calculations made to determine an accurateVTA. These calculations start at the transition pointand use arrival speed segments to the vertex.
DESIGNATED COMMON TRAFFIC ADVISORY
FREQUENCY (CTAF) AREA- In Alaska, inaddition to being designated for the purpose ofcarrying out airport advisory practices whileoperating to or from an airport without an operatingairport traffic control tower, a CTAF may also bedesignated for the purpose of carrying out advisorypractices for operations in and through areas with ahigh volume of VFR traffic.
DESIRED COURSE −
a.True− A predetermined desired course direction
to be followed (measured in degrees from true north).
b.Magnetic − A predetermined desired course
direction to be followed (measured in degrees fromlocal magnetic north).
DESIRED TRACK − The planned or intended track
between two waypoints. It is measured in degreesfrom either magnetic or true north. The i nstantaneous
angle may change from point to point along the great
circle track between waypoints.
DETRESFA (DISTRESS PHASE) [ICAO] − The
code word used to designate an emergency phasewherein there is reasonable certainty that an aircraftand its occupants are threatened by grave and
imminent danger or require immediate assistance.
DEVIA TIONS−
a.A departure from a current clearance, such as an
off course maneuver to avoid weather or turbulence.
b.Where specifically authorized in the CFRs and
requested by the pilot, ATC may permit pilots todeviate from certain regulations.
DH−
(See DECISION HEIGHT.)
DH [ICAO] −
(See ICAO Term DECISION ALTITUDE/
DECISION HEIGHT.)
DIGITAL-AUTOMATIC TERMINAL INFORMA-
TION SERVICE (D-ATIS) − The service provides
text messages to aircraft, airlines, and other usersoutside the standard reception range of conventionalATIS via landline and data link communications tothe cockpit. Also, the service provides a computer −
synthesized voice message that can be transmitted to
all aircraft within range of existing transmitters. TheTerminal Data Link System (TDLS) D-ATISapplication uses weather inputs from local automated
weather sources or manually entered meteorologicaldata together with preprogrammed menus to providestandard information to users. Airports with D-ATIScapability are listed in the Chart Supplement U.S.
DIGITAL T ARGET− A computer −generated symbol
representing an aircraft’s position, based on a primary
return or radar beacon reply, shown on a digitaldisplay.
DIGITAL TERMINAL AUTOMATION SYSTEM
(DTAS)− A system where digital radar and beacon
data is presented on digital displays and theoperational program monitors the system perfor-mance on a real −time basis.
DIGITIZED TARGET − A computer −generated
indication shown on an analog radar display resulting
from a primary radar return or a radar beacon reply.
DIRECT− Straight line flight between two naviga-
tional aids, fixes, points, or any combination thereof.
When used by pilots in describing off-airway routes,points defining direct route segments becomecompulsory reporting points unless the aircraft isunder radar contact.
DIRECTLY BEHIND − An aircraft is considered to
be operating directly behind when it is following thePilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG D−3actual flight path of the lea d aircraft ov er the surface
of the earth except when applying wake turbulenceseparation criteria.
DISCRETE BEACON CODE −
(See DISCRETE CODE.)
DISCRETE CODE − As used in the Air Traffic
Control Radar Beacon System (ATCRBS), any oneof the 4096 selectable Mode 3/A aircraft transpondercodes except those ending in zero zero; e.g., discretecodes: 0010, 1201, 2317, 7777; nondiscrete codes:0100, 1200, 7700. Nondiscrete codes are normallyreserved for radar facilities that are not equipped with
discrete decoding capability and for other purposessuch as emer gencies (7700), VFR aircraft (1200), etc.
(See RADAR.)
(Refer to AIM.)
DISCRETE FREQUENCY − A separate radio
frequency for use in direct pilot-controller commu-nications in air traffic control which reducesfrequency congestion by controlling the number ofaircraft operating on a particular frequency at onetime. Discrete frequencies are normally designatedfor each control sector in en route/terminal ATCfacilities. Discrete frequencies are listed in the Chart
Supplement U.S. and the DOD FLIP IFR En Route
Supplement.
(See CONTROL SECTOR.)
DISPLACED THRESHOLD − A threshold that is
located at a point on the runway other than thedesignated beginning of the runway.
(See THRESHOLD.)
(Refer to AIM.)
DISTANCE MEASURING EQUIPMENT (DME) −
Equipment (airborne and ground) used to measure, in
nautical miles, the slant range distance of an aircraft
from the DME navigational aid.
(See TACAN.)
(See VORTAC.)
DISTRESS − A condition of being threatened by
serious and/or imminent danger and of requiringimmediate assistance.
DIVE BRAKES −
(See SPEED BRAKES.)
DIVERSE VECTOR AREA − In a radar environ-
ment, that area in which a prescribed departure route
is not required as the only suitable route to avoidobstacles. The area in which random radar vectorsbelow the MV A/MIA, established in accordance with
the TERPS criteria for diverse departures, obstaclesand terrain avoidance, may be issued to departingaircraft.
DIVERSION (DVRSN) − Flights that are required to
land at other than their original destination forreasons beyond the control of the pilot/company, e.g.
periods of significant weather.
DME−
(See DISTANCE MEASURING EQUIPMENT.)
DME FIX − A geographical position determined by
reference to a navigational aid which providesdistance and azimuth information. It is defined by aspecific distance in nautical miles and a radial,azimuth, or course (i.e., localizer) in degreesmagnetic from that aid.
(See DISTANCE MEASURING EQUIPMENT.)
(See FIX.)
DME SEPARATION − Spacing of aircraft in terms of
distances (nautical miles) determined by reference to
distance measuring equipment (DME).
(See DISTANCE MEASURING EQUIPMENT.)
DOD FLIP − Department of Defense Flight Informa-
tion Publications used for flight planning, en route,and terminal operations. FLIP is produced by theNational Geospatial −Intelligence Agency (NGA) for
world-wide use. United States Government FlightInformation Publications (en route charts andinstrument approach procedure charts) are incorpo-rated in DOD FLIP for use in the National AirspaceSystem (NAS).
DOMESTIC AIRSPACE − Airspace which overlies
the continental land mass of the United States plusHawaii and U.S. possessions. Domestic airspaceextends to 12 miles offshore.
DOWNBURST − A strong downdraft which induces
an outburst of damaging winds on or near the ground.Damaging winds, either straight or curved, are highly
divergent. The sizes of downbursts vary from 1/2mile or less to more than 10 miles. An intensedownburst often causes widespread damage. Damag-
ing winds, lasting 5 to 30 minutes, could reach speedsas high as 120 knots.
DOWNWIND LEG −
(See TRAFFIC PATTERN.)
DP−
(See INSTRUMENT DEPARTURE PROCEDURE.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG D−4DRAG CHUTE − A parachute device installed on
certain aircraft which is deployed on landing roll toassist in deceleration of the aircraft.
DROP ZONE− Any pre-determined area upon which
parachutists or objects land after making an
intentional parachute jump or drop.
(Refer to 14 CFR §105.3, Definitions)
DSP−
(See DEPARTURE SEQUENCING PROGRAM.)
DT−
(See DELAY TIME.)
DTAS−
(See DIGITAL TERMINAL AUTOMATION
SYSTEM.)
DUE REGARD − A phase of flight wherein an
aircraft commander of a State-operated aircraftassumes responsibility to separate his/her aircraftfrom all other aircraft.
(See also FAAO JO 7110.65, Para 1 −2−1, WORD
MEANINGS.)DUTY RUNWAY −
(See RUNWAY IN USE/ACTIVE RUNWAY/DUTY
RUNWAY.)
DV A−
(See DIVERSE VECTOR AREA.)
DVFR−
(See DEFENSE VISUAL FLIGHT RULES.)
DVFR FLIGHT PLAN − A flight plan filed for a VFR
aircraft which intends to operate in airspace withinwhich the ready identification, location, and controlof aircraft are required in the interest of nationalsecurity.
DVRSN−
(See DIVERSION.)
DYNAMIC − Continuous review, evaluation, and
change to meet demands.
DYNAMIC RESTRICTIONS − Those restrictions
imposed by the local facility on an “as needed” basis
to manage unpredictable fluctuations in trafficdemands.
Pilot/Controller Glossary12/10/15
PCG E−1E
EAS−
(See EN ROUTE AUTOMATION SYSTEM.)
EDCT−
(See EXPECT DEPARTURE CLEARANCE
TIME.)
EDST−
(See EN ROUTE DECISION SUPPORT TOOL)
EFC−
(See EXPECT FURTHER CLEARANCE (TIME).)
ELT−
(See EMERGENCY LOCATOR TRANSMITTER.)
EMERGENCY − A distress or an urgency condition.
EMERGENCY LOCATOR TRANSMITTER − A
radio transmitter attached to the aircraft structurewhich operates from its own power source on121.5 MHz and 243.0 MHz. It aids in locatingdowned aircraft by radiating a downward sweepingaudio tone, 2-4 times per second. It is designed tofunction without human action after an accident.
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
E-MSAW −
(See EN ROUTE MINIMUM SAFE ALTITUDE
WARNING.)
EN ROUTE AIR TRAFFIC CONTROL SER-
VICES− Air traffic control service provided aircraft
on IFR flight plans, generally by centers, when these
aircraft are operating between departure anddestination terminal areas. When equipment, capa-bilities, and controller workload permit, certainadvisory/assistance services may be provided to VFR
aircraft.
(See AIR ROUTE TRAFFIC CONTROL
CENTER.)
(Refer to AIM.)
EN ROUTE AUTOMATION SYSTEM (EAS) − The
complex integrated environment consisting ofsituation display systems, surveillance systems andflight data processing, remote devices, decisionsupport tools, and the related communicationsequipment that form the heart of the automated IFRair traf fic control system. It interfaces with automated
terminal systems and is used in the control of en routeIFR aircraft.
(Refer to AIM.)
EN ROUTE CHARTS −
(See AERONAUTICAL CHART.)
EN ROUTE DECISION SUPPORT TOOL − An
automated tool provided at each Radar Associateposition in selected En Route facilities. This toolutilizes flight and radar data to determine present and
future trajectories for all active and proposal aircraftand provides enhanced automated flight datamanagement.
EN ROUTE DESCENT − Descent from the en route
cruising altitude which takes place along the route of
flight.
EN ROUTE HIGH ALTITUDE CHARTS −
(See AERONAUTICAL CHART.)
EN ROUTE LOW ALTITUDE CHARTS −
(See AERONAUTICAL CHART.)
EN ROUTE MINIMUM SAFE ALTITUDE WARN-
ING− A function of the EAS that aids the controller
by providing an alert when a tracked aircraft is belowor predicted by the computer to go below apredetermined minimum IFR altitude (MIA).
EN ROUTE SPACING PROGRAM (ESP) − A
program designed to assist the exit sector inachieving the required in-trail spacing.
EN ROUTE TRANSITION −
a.Conventional STARs/SIDs. The portion of a
SID/STAR that connects to one or more en routeairway/jet route.
b.RNA V STARs/SIDs. The portion of a STAR
preceding the common route or point, or for a SID the
portion following, that is coded for a specific en routefix, airway or jet route.
ESP−
(See EN ROUTE SPACING PROGRAM.)
ESTABLISHED −To be stable or fixed on a route,
route segment, altitude, heading, etc.5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG E−2ESTIMATED ELAPSED TIME [ICAO] − The
estimated time required to proceed from onesignificant point to another.
(See ICAO Term TOTAL ESTIMATED ELAPSED
TIME.)
ESTIMATED OFF-BLOCK TIME [ICAO] − The
estimated time at which the aircraft will commencemovement associated with departure.
ESTIMATED POSITION ERROR (EPE) −
(See Required Navigation Performance)
ESTIMATED TIME OF ARRIV AL − The time the
flight is estimated to arrive at the gate (scheduledoperators) or the actual runway on times fornonscheduled operators.
ESTIMATED TIME EN ROUTE − The estimated
flying time from departure point to destination(lift-off to touchdown).
ETA−
(See ESTIMATED TIME OF ARRIVAL.)
ETE−
(See ESTIMATED TIME EN ROUTE.)
EXECUTE MISSED APPROACH − Instructions
issued to a pilot making an instrument approachwhich means continue inbound to the missedapproach point and execute the missed approachprocedure as described on the Instrument ApproachProcedure Chart or as previously assigned by ATC.The pilot may climb immediately to the altitudespecified in the missed approach procedure uponmaking a missed approach. No turns should beinitiated prior to reaching the missed approach point.When conducting an ASR or PAR approach, execute
the assigned missed approach procedure immediately
upon recei ving instructions to “execute missed
approach.”
(Refer to AIM.)
EXPECT (AL TITUDE) AT (TIME) or (FIX) − Used
under certain conditions to provide a pilot with analtitude to be used in the event of two-waycommunications failure. It also provides altitudeinformation to assist the pilot in planning.
(Refer to AIM.)
EXPECT DEPARTURE CLEARANCE TIME(EDCT)− The runway release time assigned to an
aircraft in a traffic management program and shownon the flight progress strip as an EDCT.
(See GROUND DELAY PROGRAM.)
EXPECT FURTHER CLEARANCE (TIME) − The
time a pilot can expect to receive clearance beyond a
clearance limit.
EXPECT FURTHER CLEARANCE VIA (AIR-
WAYS, ROUTES OR FIXES) − Used to inform a
pilot of the routing he/she can expect if any part of the
route beyond a short range clearance limit differsfrom that filed.
EXPEDITE − Used by ATC when prompt com-
pliance is required to avoid the development of animminent situation. Expedite climb/descent normal-ly indicates to a pilot that the approximate best rateof climb/descent should be used without requiring an
exceptional change in aircraft handling characteris-tics.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG F−1F
FAF−
(See FINAL APPROACH FIX.)
FAST FILE − An FSS system whereby a pilot files a
flight plan via telephone that is recorded and latertranscribed for transmission to the appropriate airtraffic facility. (Alaska only.)
FAWP− Final Approach Waypoint
FCLT−
(See FREEZE CALCULATED LANDING TIME.)
FEATHERED PROPELLER − A propeller whose
blades have been rotated so that the leading andtrailing edges are nearly parallel with the aircraftflight path to stop or minimize drag and enginerotation. Normally used to indicate shutdown of areciprocating or turboprop engine due to malfunc-tion.
FEDERAL AIRWAYS −
(See LOW ALTITUDE AIRWAY STRUCTURE.)
FEEDER FIX − The fix depicted on Instrument
Approach Procedure Charts which establishes thestarting point of the feeder route.
FEEDER ROUTE − A route depicted on instrument
approach procedure charts to designate routes foraircraft to proceed from the en route structure to theinitial approach fix (IAF).
(See INSTRUMENT APPROACH
PROCEDURE.)
FERRY FLIGHT − A flight for the purpose of:
a.Returning an aircraft to base.
b.Delivering an aircraft from one location to
another.
c.Moving an aircraft to and from a maintenance
base.− Ferry flights, under certain conditions, may be
conducted under terms of a special flight permit.
FIELD ELEV A TION−
(See AIRPORT ELEVATION.)
FILED− Normally used in conjunction with flight
plans, meaning a flight plan has been submitted toATC.
FILED EN ROUTE DELAY − Any of the following
preplanned delays at points/areas along the route offlight which require special flight plan filing and
handling techniques.
a.Terminal Area Delay. A delay within a terminal
area for touch-and-go, low approach, or otherterminal area activity.
b.Special Use Airspace Delay. A delay within a
Military Operations Area, Restricted Area, WarningArea, or ATC Assigned Airspace.
c.Aerial Refueling Delay. A delay within an
Aerial Refueling Track or Anchor.
FILED FLIGHT PLAN − The flight plan as filed with
an ATS unit by the pilot or his/her designatedrepresentative without any subsequent changes orclearances.
FINAL− Commonly used to mean that an aircraft is
on the final approach course or is aligned with alanding area.
(See FINAL APPROACH COURSE.)
(See FINAL APPROACH-IFR.)
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
FINAL APPROACH [ICAO] − That part of an
instrument approach procedure which commences at
the specified final approach fix or point, or wheresuch a fix or point is not specified.
a.At the end of the last procedure turn, base turn
or inbound turn of a racetrack procedure, if specified;
or
b.At the point of interception of the last track
specified in the approach procedure; and ends at apoint in the vicinity of an aerodrome from which:
1.A landing can be made; or
2.A missed approach procedure is initiated.
FINAL APPROACH COURSE − A bearing/radial/
track of an instrument approach leading to a runwayor an extended runway centerline all without regardto distance.
FINAL APPROACH FIX − The fix from which the
final approach (IFR) to an airport is executed andwhich identifies the beginning of the final approachsegment. It is designated on Government charts bythe Maltese Cross symbol for nonprecisionapproaches and the lightning bolt symbol,designating the PFAF, for precision approaches; or
Pilot/Controller Glossary 12/10/15
PCG F−2when ATC directs a lower-than-published
glideslope/path or vertical path intercept altitude, it is
the resultant actual point of the glideslope/path orvertical path intercept.
(See FINAL APPROACH POINT.)
(See GLIDESLOPE INTERCEPT ALTITUDE.)(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
FINAL APPROACH-IFR − The flight path of an
aircraft which is inbound to an airport on a finalinstrument approach course, beginning at the finalapproach fix or point and extending to the airport orthe point where a circle-to-land maneuver or a missedapproach is executed.
(See FINAL APPROACH COURSE.)
(See FINAL APPROACH FIX.)(See FINAL APPROACH POINT.)
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
(See ICAO term FINAL APPROACH.)
FINAL APPROACH POINT − The point, applicable
only to a nonprecision approach with no depictedFAF (such as an on airport VOR), where the aircraftis established inbound on the final approach coursefrom the procedure turn and where the final approach
descent may be commenced. The FAP serves as theFAF and identifies the beginning of the finalapproach segment.
(See FINAL APPROACH FIX.)
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
FINAL APPROACH SEGMENT −
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
FINAL APPROACH SEGMENT [ICAO] − That
segment of an instrument approach procedure inwhich alignment and descent for landing areaccomplished.
FINAL CONTROLLER − The controller providing
information and final approach guidance during PAR
and ASR approaches utilizing radar equipment.
(See RADAR APPROACH.)
FINAL GUARD SERVICE − A value added service
provided in conjunction with LAA/RAA only during
periods of significant and fast changing weatherconditions that may affect landing and takeoffoperations.FINAL MONITOR AID − A high resolution color
display that is equipped with the controller alertsystem hardware/software used to monitor the notransgression zone (NTZ) during simultaneousparallel approach operations. The display includesalert algorithms providing the target predictors, acolor change alert when a target penetrates or ispredicted to penetrate the no transgression zone(NTZ), synthesized voice alerts, and digital mapping.
(See RADAR APPROACH.)
FINAL MONITOR CONTROLLER − Air Traffic
Control Specialist assigned to radar monitor theflight path of aircraft during simultaneous parallel(approach courses spaced less than 9000 feet/9200feet above 5000 feet) and simultaneous close parallel
approach operations. Each runway is assigned a finalmonitor controller during simultaneous parallel andsimultaneous close parallel ILS approaches.
FIR−
(See FLIGHT INFORMATION REGION.)
FIRST TIER CENTER − The ARTCC immediately
adjacent to the impacted center.
FIS−B−
(See FLIGHT INFORMATION
SERVICE −BROADCAST.)
FIX− A geographical position determined by visual
reference to the surface, by reference to one or moreradio NA V AIDs, by celestial plotting, or by anothernavigational device.
FIX BALANCING − A process whereby aircraft are
evenly distributed over several available arrival fixes
reducing delays and controller workload.
FLAG− A warning device incorporated in certain
airborne navigation and flight instruments indicating
that:
a.Instruments are inoperative or otherwise not
operating satisfactorily, or
b.Signal st rength or quality of the received signal
falls below acceptable values.
FLAG ALARM −
(See FLAG.)
FLAMEOUT − An emergency condition caused by a
loss of engine power.
FLAMEOUT PATTERN − An approach normally
conducted by a single-engine military aircraftexperiencing loss or anticipating loss of engine
Pilot/Controller Glossary12/10/15
PCG F−3power or control. The standard overhead approach
starts at a relatively high altitude over a runway(“high key”) followed by a continuous 180 degreeturn to a high, wide position (“low key”) followed by
a continuous 180 degree turn final. The standardstraight-in pattern starts at a point that results in astraight-in approach with a high rate of descent to the
runway. Flameout approaches terminate in the typeapproach requested by the pilot (normally fullstop).
FLIGHT CHECK − A call-sign prefix used by FAA
aircraft engaged in flight inspection/certification ofnavigational aids and flight procedures. The word“recorded” may be added as a suffix; e.g., “FlightCheck 320 recorded” to indicate that an automatedflight inspection is in progress in terminal areas.
(See FLIGHT INSPECTION.)
(Refer to AIM.)
FLIGHT FOLLOWING −
(See TRAFFIC ADVISORIES.)
FLIGHT INFORMATION REGION− An airspace of
defined dimensions within which Flight InformationService and Alerting Service are provided.
a.Flight Information Service. A service provided
for the purpose of giving advice and informationuseful for the safe and efficient conduct of flights.
b.Alerting Service. A service provided to notify
appropriate organizations regarding aircraft in needof search and rescue aid and to assist suchorganizations as required.
FLIGHT INFORMATION SERVICE − A service
provided for the purpose of giving advice andinformation useful for the safe and efficient conductof flights.
FLIGHT INFORMATION SERVICE −
BROADCAST (FIS−B)− A ground broadcast service
provided through the ADS −B Broadcast Services
network over the UAT data link that operates on 978
MHz. The FIS −B system provides pilots and flight
crews of properly equipped aircraft with a cockpitdisplay of certain aviation weather and aeronauticalinformation.FLIGHT INSPECTION − Inflight investigation and
evaluation of a navigational aid to determine whether
it meets established tolerances.
(See FLIGHT CHECK.)
(See NAVIGATIONAL AID.)
FLIGHT LEVEL − A level of constant atmospheric
pressure related to a reference datum of 29.92 inches
of mercury. Each is stated in three digits that representhundreds of feet. For example, flight level (FL) 250represents a barometric altimeter indication of25,000 feet; FL 255, an indication of 25,500 feet.
(See ICAO term FLIGHT LEVEL.)
FLIGHT LEVEL [ICAO] − A surface of constant
atmospheric pressure which is related to a specificpressure datum, 1013.2 hPa (1013.2 mb), and isseparated from other such surfaces by specificpressure intervals.
Note 1: A pressure type altimeter calibrated in
accordance with the standard atmosphere:
a.When set to a QNH altimeter setting, will
indicate altitude;b.When set to a QFE altimeter setting, will
indicate height above the QFE reference datum;and
c.When set to a pressure of 1013.2 hPa
(1013.2 mb), may be used to indicate flight levels.
Note 2: The terms ‘height’ and ‘altitude,’ used in
Note 1 above, indicate altimetric rather thangeometric heights and altitudes.
FLIGHT LINE − A term used to describe the precise
movement of a civil photogrammetric aircraft alonga predetermined course(s) at a predetermined altitudeduring the actual photographic run.
FLIGHT MANAGEMENT SYSTEMS − A comput-
er system that uses a large data base to allow routesto be preprogrammed and fed into the system bymeans of a data loader. The system is constantlyupdated with respect to position accuracy byreference to conventional navigation aids. Thesophisticated program and its associated data baseensures that the most appropriate aids are automati-cally selected during the information update cycle.
FLIGHT MANAGEMENT SYSTEM PROCE-
DURE− An arrival, departure, or approach procedure
developed for use by aircraft with a slant (/) E or slant(/) F equipment suffix.
Pilot/Controller Glossary 12/10/15
PCG F−4FLIGHT PATH − A line, course, or track along which
an aircraft is flying or intended to be flown.
(See COURSE.)
(See TRACK.)
FLIGHT PLAN − Specified information relating to
the intended flight of an aircraft that is filed orally or
in writing with an FSS or an ATC facility.
(See FAST FILE.)
(See FILED.)(Refer to AIM.)
FLIGHT PLAN AREA (FPA) − The geographical
area assigned to a flight service station (FSS) for thepurpose of establishing primary responsibility forservices that may include search and rescue for VFR
aircraft, issuance of NOTAMs, pilot briefings,inflight services, broadcast services, emergencyservices, flight data processing, international opera-tions, and aviation weather services. Largeconsolidated FSS facilities may combine FPAs intolarger areas of responsibility (AOR).
(See FLIGHT SERVICE STATION.)
(See TIE-IN FACILITY .)
FLIGHT RECORDER − A general term applied to
any instrument or device that records informationabout the performance of an aircraft in flight or about
conditions encountered in flight. Flight recordersmay make records of airspeed, outside airtemperature, vertical acceleration, engine RPM,manifold pressure, and other pertinent variables for a
given flight.
(See ICAO term FLIGHT RECORDER.)
FLIGHT RECORDER [ICAO] − Any type of
recorder installed in the aircraft for the purpose ofcomplementing accident/incident investigation.
Note: See Annex 6 Part I, for specifications relating
to flight recorders.
FLIGHT SERVICE STATION (FSS) − An air traffic
facility which provides pilot briefings, flight planprocessing, en route flight advisories, search and
rescue services, and assistance to lost aircraft andaircraft in emergency situations. FSS also relay ATC
clearances, process Notices to Airmen, broadcast
aviation weather and aeronautical information, and
advise Customs and Immigration of transborder
flights. In Alaska, FSS provide Airport Advisory
Services.
(See FLIGHT PLAN AREA.)
(See TIE-IN FACILITY.)FLIGHT STANDARDS DISTRICT OFFICE − An
FAA field office serving an assigned geographicalarea and staffed with Flight Standards personnel who
serve the aviation industry and the general public onmatters relating to the certification and operation ofair carrier and general aviation aircraft. Activitiesinclude general surveillance of operational safety,certification of airmen and aircraft, accidentprevention, investigation, enforcement, etc.
FLIGHT TEST − A flight for the purpose of:
a.Investigating the operation/flight characteris-
tics of an aircraft or aircraft component.
b.Evaluating an applicant for a pilot certificate or
rating.
FLIGHT VISIBILITY −
(See VISIBILITY.)
FLIP−
(See DOD FLIP.)
FLY HEADING (DEGREES) − Informs the pilot of
the heading he/she should fly . The pilot may have to
turn to, or continue on, a specific compass directionin order to comply with the instructions. The pilot isexpected to turn in the shorter direction to the heading
unless otherwise instructed by ATC.
FLY-BY WAYPOINT − A fly-by waypoint requires
the use of turn anticipation to avoid overshoot of thenext flight segment.
FLY-OVER WAYPOINT − A fly-over waypoint
precludes any turn until the waypoint is overflownand is followed by an intercept maneuver of the nextflight segment.
FLY VISUAL TO AIRPORT −
(See PUBLISHED INSTRUMENT APPROACH
PROCEDURE VISUAL SEGMENT.)
FMA−
(See FINAL MONITOR AID.)
FMS−
(See FLIGHT MANAGEMENT SYSTEM.)
FMSP−
(See FLIGHT MANAGEMENT SYSTEM
PROCEDURE.)
FORMATION FLIGHT − More than one aircraft
which, by prior arrangement between the pilots,operate as a single aircraft with regard to navigationand position reporting. Separation between aircraftwithin the formation is the responsibility of the flightPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG F−5leader and the pilots of the other aircraft in the flight.
This includes transition periods when aircraft withinthe formation are maneuvering to attain separationfrom each other to effect individual control andduring join-up and breakaway.
a.A standard formation is one in which a
proximity of no more than 1 mile laterally orlongitudinally and within 100 feet vertically from the
flight leader is maintained by each wingman.
b.Nonstandard formations are those operating
under any of the following conditions:
1.When the flight leader has requested and ATC
has approved other than standard formationdimensions.
2.When operating within an authorized altitude
reservation (ALTRV) or under the provisions of aletter of agreement.
3.When the operations are conducted in
airspace specifically designed for a special activity.
(See ALTITUDE RESERVATION.)
(Refer to 14 CFR Part 91.)
FRC−
(See REQUEST FULL ROUTE CLEARANCE.)
FREEZE/FROZEN − Terms used in referring to
arrivals which have been assigned ACLTs and to thelists in which they are displayed.
FREEZE CALCULATED LANDING TIME − A
dynamic parameter number of minutes prior to themeter fix calculated time of arrival for each aircraftwhen the TCLT is frozen and becomes an ACLT (i.e.,
the VTA is updated and consequently the TCLT ismodified as appropriate until FCLT minutes prior tometer fix calculated time of arrival, at which timeupdating is suspended and an ACLT and a frozenmeter fix crossing time (MFT) is assigned).
FREEZE HORIZON − The time or point at which an
aircraft’s STA becomes fixed and no longer fluctuates
with each radar update. This setting ensures aconstant time for each aircraft, necessary for themetering controller to plan his/her delay technique.This setting can be either in distance from the meterfix or a prescribed flying time to the meter fix.
FREEZE SPEED PARAMETER − A speed adapted
for each aircraft to determine fast and slow aircraft.Fast aircraft freeze on parameter FCLT and slow
aircraft freeze on parameter MLDI.
FRICTION MEASUREMENT − A measurement of
the friction characteristics of the runway pavementsurface using continuous self-watering frictionmeasurement equipment in accordance with thespecifications, procedures and schedules containedin AC 150/5320 −12, Measurement, Construction,
and Maintenance of Skid Resistant Airport Pavement
Surfaces.
FSDO−
(See FLIGHT STANDARDS DISTRICT OFFICE.)
FSPD−
(See FREEZE SPEED PARAMETER.)
FSS−
(See FLIGHT SERVICE STATION.)
FUEL DUMPING − Airborne release of usable fuel.
This does not include the dropping of fuel tanks.
(See JETTISONING OF EXTERNAL STORES.)
FUEL REMAINING − A phrase used by either pilots
or controllers when relating to the fuel remaining onboard until actual fuel exhaustion. When transmitting
such information in response to either a controllerquestion or pilot initiated cautionary advisory to airtraffic control, pilots will state the APPROXIMATENUMBER OF MINUTES the flight can continuewith the fuel remaining. All reserve fuel SHOULDBE INCLUDED in the time stated, as should anallowance for established fuel gauge system error.
FUEL SIPHONING − Unintentional release of fuel
caused by overflow, puncture, loose cap, etc.
FUEL VENTING −
(See FUEL SIPHONING.)
FUSED TARGET-
(See DIGITAL TARGET)
FUSION [STARS/CARTS]- the combination of all
available surveillance sources (airport surveillanceradar [ASR], air route surveillance radar [ARSR],ADS-B, etc.) into the display of a single trackedtarget for air traffic control separation services.FUSION is the equivalent of the currentsingle-sensor radar display. FUSION performance is
characteristic of a single-sensor radar display system.
Terminal areas use mono-pulse secondary surveil-lance radar (ASR 9, Mode S or ASR 11, MSSR).5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary12/10/15
PCG G−1G
GATE HOLD PROCEDURES − Procedures at
selected airports to hold aircraft at the gate or otherground location whenever departure delays exceed or
are anticipated to exceed 15 minutes. The sequencefor departure will be maintained in accordance withinitial call −up unless modified by flow control
restrictions. Pilots should monitor the groundcontrol/clearance delivery frequency for enginestart/taxi advisories or new proposed start/taxi timeif the delay changes.
GBT−
(See GROUND −BASED TRANSCEIVER.)
GCA−
(See GROUND CONTROLLED APPROACH.)
GDP−
(See GROUND DELAY PROGRAM.)
GENERAL A VIATION − That portion of civil
aviation that does not include scheduled orunscheduled air carriers or commercial spaceoperations.
(See ICAO term GENERAL AVIATION.)
GENERAL A VIATION [ICAO] − All civil aviation
operations other than sche duled air services and
nonscheduled air transport operations for remunera-tion or hire.
GEO MAP − The digitized map markings associated
with the ASR-9 Radar System.
GLIDEPATH −
(See GLIDESLOPE.)
GLIDEPATH [ICAO]− A descent profile determined
for vertical guidance during a final approach.
GLIDEPATH INTERCEPT AL TITUDE−
(See GLIDESLOPE INTERCEPT ALTITUDE.)
GLIDESLOPE − Provides vertical guidance for
aircraft during approach and landing. The glideslope/
glidepath is based on the following:
a.Electronic components emitting signals which
provide vertical guidance by reference to airborneinstruments during instrument approaches such asILS orb.Visual ground aids, such as V ASI, which
provide vertical guidance for a VFR approach or forthe visual portion of an instrument approach andlanding.
c.PAR. Used by A TC to inform an aircraft making
a PAR approach of its vertical position (elevation)relative to the descent profile.
(See ICAO term GLIDEPATH.)
GLIDESLOPE INTERCEPT ALTITUDE − The
published minimum altitude to intercept theglideslope in the intermediate segment of aninstrument approach. Government charts use thelightning bolt symbol to identify this intercept point.
This intersection is called the Precise Final Approach
fix (PFAF). ATC directs a higher altitude, theresultant intercept becomes the PFAF.
(See FINAL APPROACH FIX.)
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
GLOBAL NA VIGATION SATELLITE SYSTEM
(GNSS) [ICAO] − GNSS refers collectively to the
worldwide positioning, navigation, and timingdetermination capability available from one or moresatellite constellation in conjunction with a networkof ground stations.
GLOBAL NA VIGATION SATELLITE SYSTEM
MINIMUM EN ROUTE IFR ALTITUDE (GNSSMEA)− The minimum en route IFR altitude on a
published ATS route or route segment which assures
acceptable Global Navigation Sate llite System
reception and meets obstacle clearance requirements.
(Refer to 14 CFR Part 91.)(Refer to 14 CFR Part 95.)
GLOBAL POSITIONING SYSTEM (GPS) −
GPS
refers to the worldwide positioning, navigationand timing determination capability available
from the U.S. satellite constellation. The service
provided by GPS for civil use is defined in theGPS Standard Positioning System PerformanceStandard. GPS is composed of space, control,and user elements.
GNSS [ICAO] −
(See GLOBAL NAVIGATION SATELLITE
SYSTEM .)
Pilot/Controller Glossary 12/10/15
PCG G−2GNSS MEA −
(See GLOBAL NAVIGATION SATELLITE
SYSTEM MINIMUM EN ROUTE IFRALTITUDE.)
GO AHEAD − Proceed with your message. Not to be
used for any other purpose.
GO AROUND − Instructions for a pilot to abandon
his/her approach to landing. Additional instructionsmay follow. Unless otherwise advised by ATC, aVFR aircraft or an aircraft conducting visualapproach should overfly the runway while climbingto traffic pattern altitude and enter the traffic patternvia the crosswind leg. A pilot on an IFR flight planmaking an instrument approach should execute thepublished missed approach procedure or proceed asinstructed by ATC; e.g., “Go around” (additionalinstructions if required).
(See LOW APPROACH.)
(See MISSED APPROACH.)
GPD−
(See GRAPHIC PLAN DISPLAY.)
GPS−
(See GLOBAL POSITIONING SYSTEM.)
GRAPHIC PLAN DISPLAY (GPD) − A view
available with EDST that provides a graphic displayof aircraft, traffic, and notification of predictedconflicts. Graphic routes for Current Plans and TrialPlans are displayed upon controller request.
(See EN ROUTE DECISION SUPPORT TOOL. )
GROSS NA VIGATION ERROR (GNE) − A lateral
deviation from a cleared track, normally in excess of
25 Nautical Miles (NM). More stringent standards(for example, 10NM in some parts of the NorthAtlantic region) may be used in certain regions tosupport reductions in lateral separation.
GROUND BASED AUGMENTATION SYSTEM
(GBAS)– A ground based GNSS station which
provides local differential corrections, integrity
parameters and approach data via VHF data broadcast
to GNSS users to meet real-time performance
requirements for CAT I precision approaches. The
aircraft applies the broadcast data to improve the
accuracy and integrity of its GNSS signals and
computes the deviations to the selected approach. A
single ground station can serve multiple runway ends
up to an approximate radius of 23 NM. GROUND BASED AUGMENTATION SYSTEM
(GBAS) LANDING SYSTEM (GLS)- A type of
precision IAP based on local augmentation of GNSS
data using a single GBAS station to transmit locally
corrected GNSS data, integrity parameters and
approach information. This improves the accuracy of
aircraft GNSS receivers’ signal in space, enabling the
pilot to fly a precision approach with much greater
flexibility, reliability and complexity. The GLS
procedure is published on standard IAP charts,
features the title GLS with the designated runway and
minima as low as 200 feet DA. Future plans are
expected to support Cat II and CAT III operations.
GROUND −BASED TRANSCEIVER (GBT) − The
ground−based transmitter/receiver (transceiver) re-
ceives automatic dependent surveillance −broadcast
messages, which are forwarded to an air trafficcontrol facility for processing and display with other
radar targets on the plan position indicator (radardisplay).
(See AUTOMATIC DEPENDENT
SURVEILLANCE-BROADCAST.)
GROUND CLUTTER − A pattern produced on the
radar scope by ground returns which may degradeother radar returns in the affected area. The effect ofground clutter is minimized by the use of movingtarget indicator (MTI) circuits in the radar equipmentresulting in a radar presentation which displays onlytargets which are in motion.
(See CLUTTER.)
GROUND COMMUNICATION OUTLET (GCO) −
An unstaffed, remotely controlled, ground/groundcommunications facility. Pilots at uncontrolledairports may contact ATC and FSS via VHF to atelephone connection to obtain an instrumentclearance or close a VFR or IFR flight plan. They may
also get an updated weather briefing prior to takeoff.Pilots will use four “key clicks” on the VHF radio tocontact the appropriate ATC facility or six “keyclicks” to contact the FSS. The GCO system isintended to be used only on the ground.
GROUND CONTROLLED APPROACH − A radar
approach system operated from the ground by airtraffic control personnel transmitting instructions tothe pilot by radio. The approach may be conductedwith surveillance radar (ASR) only or with bothsurveillance and precision approach radar (PAR).Usage of the term “GCA” by pilots is discouragedexcept when referring to a GCA facility. Pilots should
specifically request a “PAR” approach when aPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG G−3precision radar approach is desired or request an
“ASR” or “surveillance” approach when a nonpreci-sion radar approach is desired.
(See RADAR APPROACH.)
GROUND DELAY PROGRAM (GDP) − A traffic
management process administered by the ATCSCC;when aircraft are held on the ground. The purpose of
the program is to support the TM mission and limitairborne holding. It is a flexible program and may be
implemented in various forms depending upon theneeds of the AT system. Ground delay programsprovide for equitable assignment of delays to allsystem users.
GROUND SPEED− The speed of an aircraft relativeto the surface of the earth.
GROUND STOP (GS) − The GS is a process that
requires aircraft that meet a specific criteria to remain
on the ground. The criteria may be airport specific,airspace specific, or equipment specific; for example,
all departures to San Francisco, or all departuresentering Yorktown sector, or all Category I and IIaircraft going to Charlotte. GSs normally occur with
little or no warning.
GROUND VISIBILITY −
(See VISIBILITY.)
GS−
(See GROUND STOP.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary12/10/15
PCG H−1H
HAA−
(See HEIGHT ABOVE AIRPORT.)
HAL−
(See HEIGHT ABOVE LANDING.)
HANDOFF − An action taken to transfer the radar
identification of an aircraft from one controller toanother if the aircraft will enter the receivingcontroller’s airspace and radio communications with
the aircraft will be transferred.
HAR−
(See HIGH ALTITUDE REDESIGN .)
HAT−
(See HEIGHT ABOVE TOUCHDOWN.)
HAVE NUMBERS − Used by pilots to inform ATC
that they have received runway, wind, and altimeterinformation only.
HAZARDOUS INFLIGHT WEATHER ADVISO-
RY SERVICE − Continuous r ecorded hazar dous
inflight weather forecasts broadcasted to airbornepilots over selected VOR outlets defined as anHIWAS BROADCAST AREA.
HAZARDOUS WEATHER INFORMATION −
Summary of significant meteorological information(SIGMET/WS), convective significant meteorologi-cal information (convective SIGMET/WST), urgentpilot weather reports (urgent PIREP/UUA), centerweather advisories (CWA), airmen’s meteorologicalinformation (AIRMET/WA) and any other weathersuch as isolated thunderstorms that are rapidlydeveloping and increasing in intensity, or lowceilings and visibilities that are becoming wide-spread which is considered significant and are notincluded in a current hazardous weather advisory.
HEAVY (AIRCRAFT) −
(See AIRCRAFT CLASSES.)
HEIGHT ABOVE AIRPORT − The height of the
Minimum Descent Altitude above the publishedairport elevation. This is published in conjunctionwith circling minimums.
(See MINIMUM DESCENT ALTITUDE.)HEIGHT ABOVE LANDING − The height above a
designated helicopter landing area used for helicopter
instrument approach procedures.
(Refer to 14 CFR Part 97.)
HEIGHT ABOVE TOUCHDOWN − The height of
the Decision Height or Minimum Descent Altitudeabove the highest runway elevation in the touchdown
zone (first 3,000 feet of the runway). HAT ispublished on instrument approach charts in conjunc-
tion with all straight-in minimums.
(See DECISION HEIGHT.)
(See MINIMUM DESCENT ALTITUDE.)
HELICOPTER − A heavier-than-air aircraft sup-
ported in flight chiefly by the reactions of the air onone or more power-driven rotors on substantiallyvertical axes.
HELIPAD − A small, designated area, usually with a
prepared surface, on a heliport, airport, landing/take-
off area, apron/ramp, or movement area used fortakeoff, landing, or parking of helicopters.
HELIPORT − An area of land, water, or structure used
or intended to be used for the landing and takeoff ofhelicopters and includes its buildings and facilities if
any.
HELIPORT REFERENCE POINT (HRP) − The
geographic center of a heliport.
HERTZ− The standard radio equivalent of frequency
in cycles per second of an electromagnetic wave.Kilohertz (kHz) is a frequency of one thousand cycles
per second. Megahertz (MHz) is a frequency of onemillion cycles per second.
HF−
(See HIGH FREQUENCY.)
HF COMMUNICA TIONS−
(See HIGH FREQUENCY COMMUNICATIONS.)
HIGH ALTITUDE REDESIGN (HAR) − A level of
non−restrictive routing (NRR) service for aircraft
that have all waypoints associated with the HARprogram in their flight management systems orRNA V equipage.
HIGH FREQUENCY − The frequency band between
3 and 30 MHz.
(See HIGH FREQUENCY COMMUNICATIONS.)
Pilot/Controller Glossary 12/10/15
PCG H−2HIGH FREQUENCY COMMUNICA TIONS− High
radio frequencies (HF) between 3 and 30 MHz usedfor air-to-ground voice communication in overseasoperations.
HIGH SPEED EXIT −
(See HIGH SPEED TAXIWAY.)
HIGH SPEED TAXIWAY − A long radius taxiway
designed and provided with lighting or marking todefine the path of aircraft, traveling at high speed (up
to 60 knots), from the runway center to a point on thecenter of a taxiway. Also referred to as long radiusexit or turn-off taxiway. The high speed taxiway isdesigned to expedite aircraft turning off the runwayafter landing, thus reducing runway occupancy time.
HIGH SPEED TURNOFF −
(See HIGH SPEED TAXIWAY.)
HIWAS−
(See HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE.)
HIWAS AREA −
(See HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE.)
HIWAS BROADCAST AREA − A geographical area
of responsibility including one or more HIWASoutlet areas assigned to a FSS for hazardous weather
advisory broadcasting.
HIWAS OUTLET AREA − An area defined as a 150
NM radius of a HIWAS outlet, expanded as necessary
to provide coverage.
HOLD FOR RELEASE − Used by ATC to delay an
aircraft for traf fic management reasons; i.e., weather,
traffic volume, etc. Hold for release instructions(including departure delay information) are used toinform a pilot or a controller (either directly or
through an authorized relay) that an IFR departure
clearance is not valid until a release time or additional
instructions have been received.
(See ICAO term HOLDING POINT.)
HOLD IN LIEU OF PROCEDURE TURN − A hold
in lieu of procedure turn shall be established over afinal or intermediate fix when an approach can bemade from a properly aligned holding pattern. Thehold in lieu of procedure turn permits the pilot toalign with the final or intermediate segment of theapproach and/or descend in the holding pattern to analtitude that will permit a normal descent to the final
approach fix altitude. The hold in lieu of procedureturn is a required maneuver (the same as a procedure
turn) unless the aircraft is being radar vectored to thefinal approach course, when “NoPT” is shown on theapproach chart, or when the pilot requests or thecontroller advises the pilot to make a “straight −in”
approach.
HOLD PROCEDURE − A predetermined maneuver
which keeps aircraft within a specified airspace while
awaiting further clearance from air traffic control.Also used during ground operations to keep aircraftwithin a specified area or at a specified point whileawaiting further clearance from air traffic control.
(See HOLDING FIX.)
(Refer to AIM.)
HOLDING FIX − A specified fix identifiable to a
pilot by NA V AIDs or visual reference to the groundused as a reference point in establishing andmaintaining the position of an aircraft while holding.
(See FIX.)
(See VISUAL HOLDING.)(Refer to AIM.)
HOLDING POINT [ICAO] − A specified location,
identified by visual or other means, in the vicinity of
which the position of an aircraft in flight ismaintained in accordance with air traffic controlclearances.
HOLDING PROCEDURE −
(See HOLD PROCEDURE.)
HOLD-SHORT POINT − A point on the runway
beyond which a landing aircraft with a LAHSOclearance is not authorized to proceed. This pointmay be located prior to an intersecting runway,taxiway, predetermined point, or approach/departure
flight path.
HOLD-SHORT POSITION LIGHTS − Flashing
in-pavement white lights located at specifiedhold-short points.
HOLD-SHORT POSITION MARKING − The
painted runway marking located at the hold-shortpoint on all LAHSO runways.
HOLD-SHORT POSITION SIGNS − Red and white
holding position signs located alongside thehold-short point.
Pilot/Controller Glossary12/10/15
PCG H−3HOMING − Flight toward a NA V AID, without
correcting for wind, by adjusting the aircraft heading
to maintain a relative bearing of zero degrees.
(See BEARING.)
(See ICAO term HOMING.)
HOMING [ICAO] − The procedure of using the
direction-finding equipment of one radio station with
the emission of another radio station, where at leastone of the stations is mobile, and whereby the mobilestation proceeds continuously towards the other
station.
HOVER CHECK − Used to describe when a
helicopter/VTOL aircraft requires a stabilized hoverto conduct a performance/power check prior to hover
taxi, air taxi, or takeoff. Altitude of the hover willvary based on the purpose of the check.HOVER T AXI − Used to describe a helicopter/VTOL
aircraft movement conducted above the surface andin ground effect at airspeeds less than approximately20 knots. The actual height may vary, and somehelicopters may require hover taxi above 25 feet AGL
to reduce ground effect turbulence or provideclearance for cargo slingloads.
(See AIR TAXI.)
(See HOVER CHECK.)(Refer to AIM.)
HOW DO YOU HEAR ME? − A question relating to
the quality of the transmission or to determine howwell the transmission is being received.
HZ−
(See HERTZ.)
Pilot/Controller Glossary12/10/15
PCG I−1I
I SAY AGAIN − The message will be repeated.
IAF−
(See INITIAL APPROACH FIX.)
IAP−
(See INSTRUMENT APPROACH
PROCEDURE.)
IAWP− Initial Approach Waypoint
ICAO−
(See ICAO Term INTERNATIONAL CIVIL
AVIATION ORGANIZATION.)
ICING− The accumulation of airframe ice.
Types of icing are:
a.Rime Ice− Rough, milky, opaque ice formed by
the instantaneous freezing of small supercooledwater droplets.
b.Clear Ice − A glossy, clear, or translucent ice
formed by the relatively slow freezing or largesupercooled water droplets.
c.Mixed− A mixture of clear ice and rime ice.
Intensity of icing:
a.Trace− Ice becomes perceptible. Rate of
accumulation is slightly greater than the rate ofsublimation. Deicing/anti-icing equipment is notutilized unless encountered for an extended period of
time (over 1 hour).
b.Light− The rate of accumulation may create a
problem if flight is prolonged in this environment(over 1 hour). Occasional use of deicing/anti-icingequipment removes/prevents accumulation. It doesnot present a problem if the deicing/anti-icingequipment is used.
c.Moderate − The rate of accumulation is such that
even short encounters become potentially hazardousand use of deicing/anti-icing equipment or flightdiversion is necessary.
d.Severe− The rate of ice accumulation is such
that ice protection systems fail to remove the
accumulation of ice, or ice accumulates in locations
not normally prone to icing, such as areas aft of
protected surfaces and any other areas identified bythe manufacturer. Immediate exit from the condition
is necessary.
Note:
Severe icing is aircraft dependent, as are the other
categories of icing intensity. Severe icing may
occur at any ice accumulation rate.
IDENT− A request for a pilot to activate the aircraft
transponder identification feature. This will help thecontroller to confirm an aircraft identity or to identify
an aircraft.
(Refer to AIM.)
IDENT FEATURE − The special feature in the Air
Traffic Control Radar Beacon System (ATCRBS)equipment. It is used to immediately distinguish one
displayed beacon target from other beacon targets.
(See IDENT.)
IF−
(See INTERMEDIATE FIX.)
IFIM−
(See INTERNATIONAL FLIGHT INFORMATION
MANUAL.)
IF NO TRANSMISSION RECEIVED FOR
(TIME)− Used by ATC in radar approaches to prefix
procedures which should be followed by the pilot inevent of lost communications.
(See LOST COMMUNICATIONS.)
IFR−
(See INSTRUMENT FLIGHT RULES.)
IFR AIRCRAFT − An aircraft conducting flight in
accordance with instrument flight rules.
IFR CONDITIONS − Weather conditions below the
minimum for flight under visual flight rules.
(See INSTRUMENT METEOROLOGICAL
CONDITIONS.)
IFR DEPARTURE PROCEDURE −
(See IFR TAKEOFF MINIMUMS AND
DEPARTURE PROCEDURES.)
(Refer to AIM.)
IFR FLIGHT −
(See IFR AIRCRAFT.)
IFR LANDING MINIMUMS −
(See LANDING MINIMUMS.)
IFR MILITARY TRAINING ROUTES (IR) − Routes
used by the Department of Defense and associated5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG I−2Reserve and Air Guard units for the purpose of
conducting low-altitude navigation and tacticaltraining in both IFR and VFR weather conditionsbelow 10,000 feet MSL at airspeeds in excess of 250
knots IAS.
IFR TAKEOFF MINIMUMS AND DEPARTURE
PROCEDURES − Title 14 Code of Federal
Regulations Part 91, prescribes standard takeoff rules
for certain civil users. At some airports, obstructionsor other factors require the establishment ofnonstandard takeoff minimums, departure proce-dures, or both to assist pilots in avoiding obstaclesduring climb to the minimum en route altitude. Those
airports are listed in FAA/DOD Instrument Approach
Procedures (IAPs) Charts under a section entitled“IFR Takeoff Minimums and Departure Procedures.”
The FAA/DOD IAP chart legend illustrates thesymbol used to alert the pilot to nonstandard takeoffminimums and departure procedures. When depart-ing IFR from such airports or from any airports wherethere are no departure procedures, DPs, or ATCfacilities available, pilots should advise ATC of anydeparture limitations. Controllers may query a pilotto determine acceptable departure directions, turns,or headings after takeoff. Pilots should be familiarwith the departure procedures and must assure thattheir aircraft can meet or exceed any specified climbgradients.
IF/IAWP− Intermediate Fix/Initial Approach Way-
point. The waypoint where the final approach course
of a T approach meets the crossbar of the T. Whendesignated (in conjunction with a TAA) thiswaypoint will be used as an IAWP when approaching
the airport from certain directions, and as an IFWPwhen beginning the approach from another IAWP.
IFWP− Intermediate Fix Waypoint
ILS−
(See INSTRUMENT LANDING SYSTEM.)
ILS CATEGORIES − 1. Category I. An ILS approach
procedure which provides for approach to a heightabove touchdown of not less than 200 feet and withrunway visual range of not less than 1,800 feet. −
2. Special Authorization Category I. An ILSapproach procedure which provides for approach toa height above touchdown of not less than 150 feetand with runway visual range of not less than 1,400feet, HUD to DH. 3. Category II. An ILS approachprocedure which provides for approach to a height
above touchdown of not less than 100 feet and withrunway visual range of not less than 1,200 feet (with
autoland or HUD to touchdown and noted onauthorization, RVR 1,000 feet). − 4. Special
Authorization Category II with Reduced Lighting.An ILS approach procedure which provides forapproach to a height above touchdown of not lessthan 100 feet and with runway visual range of not less
than 1,200 feet with autoland or HUD to touchdownand noted on authorization (no touchdown zone andcenterline lighting are required). − 5. Category III:
a.IIIA.−An ILS approach procedure which
provides for approach without a decision heightminimum and with runway visual range of not lessthan 700 feet.
b.IIIB.−An ILS approach procedure which
provides for approach without a decision heightminimum and with runway visual range of not lessthan 150 feet.
c.IIIC.−An ILS approach procedure which
provides for approach without a decision heightminimum and without runway visual rangeminimum.
ILS PRM APPROACH − An instrument landing
system (ILS) approach conducted to parallel runways
whose extended centerlines are separated by less than4,300 feet and at least 3,000 feet where independentclosely spaced approaches are permitted. Also usedin conjunction with an LDA PRM, RNA V PRM orGLS PRM approach to conduct Simultaneous OffsetInstrument Approach (SOIA) operations. NoTransgression Zone (NTZ) monitoring is required to
conduct these approaches. ATC utilizes an enhanceddisplay with alerting and, with certain runwayspacing, a high update rate PRM surveillance sensor.
Use of a secondary monitor frequency, pilot PRMtraining, and publication of an Attention All UsersPage are also required for all PRM approaches.
(Refer to AIM)
IM−
(See INNER MARKER. )
IMC−
(See INSTRUMENT METEOROLOGICAL
CONDITIONS.)
IMMEDIATELY − Used by ATC or pilots when such
action compliance is required to avoid an imminentsituation.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG I−3INCERFA (Uncertainty Phase) [ICAO] − A situation
wherein uncertainty exists as to the safety of anaircraft and its occupants.
INCREASE SPEED TO (SPEED) −
(See SPEED ADJUSTMENT.)
INERTIAL NA VIGATION SYSTEM − An RNA V
system which is a form of self-contained navigation.
(See Area Navigation/RNAV.)
INFLIGHT REFUELING −
(See AERIAL REFUELING.)
INFLIGHT WEATHER ADVISORY −
(See WEATHER ADVISORY.)
INFORMATION REQUEST − A request originated
by an FSS for information concerning an overdueVFR aircraft.
INITIAL APPROACH FIX − The fixes depicted on
instrument approach procedure charts that identifythe beginning of the initial approach segment(s).
(See FIX.)
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
INITIAL APPROACH SEGMENT −
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
INITIAL APPROACH SEGMENT [ICAO] − That
segment of an instrument approach procedurebetween the init ial approach fix and the intermediate
approach fix or, where applicable, the final approachfix or point.
INLAND NA VIGATION FACILITY − A navigation
aid on a North American Route at which the commonroute and/or the noncommon route begins or ends.
INNER MARKER − A marker beacon used with an
ILS (CAT II) precision approach located between themiddle marker and the end of the ILS runway,transmitting a radiation pattern keyed at six dots persecond and indicating to the pilot, both aurally andvisually, that he/she is at the designated decisionheight (DH), normally 100 feet above the touchdown
zone elevation, on the ILS CAT II approach. It alsomarks progress during a CAT III approach.
(See INSTRUMENT LANDING SYSTEM.)
(Refer to AIM.)
INNER MARKER BEACON −
(See INNER MARKER.)INREQ−
(See INFORMATION REQUEST.)
INS−
(See INERTIAL NAVIGATION SYSTEM.)
INSTRUMENT APPROACH −
(See INSTRUMENT APPROACH
PROCEDURE.)
INSTRUMENT APPROACH PROCEDURE − A
series of predetermined maneuvers for the orderlytransfer of an aircraft under instrument flightconditions from the beginning of the initial approach
to a landing or to a point from which a landing maybe made visually. It is prescribed and approved for aspecific airport by competent authority.
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
a.U.S. civil standard instrument approach
procedures are approved by the FAA as prescribedunder 14 CFR Part 97 and are available for publicuse.
b.U.S. military standard instrument approach
procedures are approved and published by theDepartment of Defense.
c.Special instrument approach procedures are
approved by the FAA for individual operators but are
not published in 14 CFR Part 97 for public use.
(See ICAO term INSTRUMENT APPROACH
PROCEDURE.)
INSTRUMENT APPROACH OPERATIONS
[ICAO]* An approach and landing using instruments
for navigation guidance based on an instrumentapproach procedure. There are two methods forexecuting instrument approach operations:
a.A two−dimensional (2D) instrument approach
operation, using lateral navigation guidance only;and
b.A three−dimensional (3D) instrument approach
operation, using both lateral and vertical navigationguidance.
Note: Lateral and vertical navigation guidance
refers to the guidance provided either by:a) a ground −based radio navigation aid; or
b) computer −generated navigation data from
ground−based, space −based, self −contained
navigation aids or a combination of these.
(See ICAO term INSTRUMENT APPROACH
PROCEDURE.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG I−4INSTRUMENT APPROACH PROCEDURE
[ICAO]− A series of predetermined maneuvers by
reference to flight instruments with specifiedprotection from obstacles from the initial approachfix, or where applicable, from the beginning of adefined arrival route to a point from which a landing
can be completed and thereafter, if a landing is notcompleted, to a position at which holding or en route
obstacle clearance criteria apply.
(See ICAO term INSTRUMENT APPROACH
OPERATIONS)
INSTRUMENT APPROACH PROCEDURES
CHARTS −
(See AERONAUTICAL CHART.)
INSTRUMENT DEPARTURE PROCEDURE
(DP)− A preplanned instrument flight rule (IFR)
departure procedure published for pilot use, ingraphic or textual format, that provides obstructionclearance from the terminal area to the appropriate en
route structure. There are two types of DP, ObstacleDeparture Procedure (ODP), printed either textuallyor graphically, and, Standard Instrument Departure(SID), which is always printed graphically.
(See IFR TAKEOFF MINIMUMS AND
DEPARTURE PROCEDURES.)
(See OBSTACLE DEPARTURE PROCEDURES.)(See STANDARD INSTRUMENT DEPARTURES.)(Refer to AIM.)
INSTRUMENT DEPAR TURE PROCEDURE (DP)
CHARTS −
(See AERONAUTICAL CHART.)
INSTRUMENT FLIGHT RULES − Rules governing
the procedures for conducting instrument flight. Alsoa term used by pilots and controllers to indicate typeof flight plan.
(See INSTRUMENT METEOROLOGICAL
CONDITIONS.)
(See VISUAL FLIGHT RULES.)(See VISUAL METEOROLOGICAL
CONDITIONS.)
(See ICAO term INSTRUMENT FLIGHT
RULES.)
(Refer to AIM.)
INSTRUMENT FLIGHT RULES [ICAO] − A set of
rules governing the conduct of flight underinstrument meteorological conditions.
INSTRUMENT LANDING SYSTEM − A precision
instrument approach system which normally consistsof the following electronic components and visual
aids:
a.Localizer.
(See LOCALIZER.)
b.Glideslope.
(See GLIDESLOPE.)
c.Outer Marker.
(See OUTER MARKER.)
d.Middle Marker.
(See MIDDLE MARKER.)
e.Approach Lights.
(See AIRPORT LIGHTING.)
(Refer to 14 CFR Part 91.)(Refer to AIM.)
INSTRUMENT METEOROLOGICAL CONDI-
TIONS− Meteorological conditions expressed in
terms of visibility, distance from cloud, and ceilingless than the minima specified for visual meteorolog-
ical conditions.
(See INSTRUMENT FLIGHT RULES.)
(See VISUAL FLIGHT RULES.)(See VISUAL METEOROLOGICAL
CONDITIONS.)
INSTRUMENT RUNWAY − A runway equipped
with electronic and visual navigation aids for whicha precision or nonprecision approach procedurehaving straight-in landi ng minimums has been
approved.
(See ICAO term INSTRUMENT RUNWAY.)
INSTRUMENT RUNWAY [ICAO] − One of the
following types of runways intended for theoperation of aircraft using instrument approachprocedures:
a.Nonprecision Approach Runway −An instru-
ment runway served by visual aids and a nonvisualaid providing at least directional guidance adequatefor a straight-in approach.
b.Precision Approach Runway, Category I −An
instrument runway served by ILS and visual aidsintended for operations down to 60 m (200 feet)decision height and down to an RVR of the order of800 m.
c.Precision Approach Runway, Category II −An
instrument runway served by ILS and visual aidsintended for operations down to 30 m (100 feet)decision height and down to an RVR of the order of400 m.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG I−5d.Precision Approach Runway , Category III −An
instrument runway served by ILS to and along thesurface of the runway and:
1.Intended for operations down to an RVR of
the order of 200 m (no decision height beingapplicable) using visual aids during the final phase of
landing;
2.Intended for operations down to an RVR of
the order of 50 m (no decision height beingapplicable) using visual aids for taxiing;
3.Intended for operations without reliance on
visual reference for landing or taxiing.
Note 1: See Annex 10 Volume I, Part I, Chapter 3,
for related ILS specifications.
Note 2: Visual aids need not necessarily be
matched to the scale of nonvisual aids provided.The criterion for the selection of visual aids is theconditions in which operations are intended to beconducted.
INTEGRITY − The ability of a system to provide
timely warnings to users when the system should not
be used for navigation.
INTERMEDIATE APPROACH SEGMENT −
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
INTERMEDIATE APPROACH SEGMENT
[ICAO]− That segment of an instrument approach
procedure between either the intermediate approachfix and the final approach fix or point, or between theend of a reversal, race track or dead reckoning trackprocedure and the final approach fix or point, asappropriate.
INTERMEDIATE FIX − The fix that identifies the
beginning of the intermediate approach segment of an
instrument approach procedure. The fix is notnormally identified on the instrument approach chart
as an intermediate fix (IF).
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
INTERMEDIATE LANDING − On the rare occasion
that this option is requested, it should be approved.The departure center, however, must advise theATCSCC so that the appropriate delay is carried over
and assigned at the intermediate airport. Anintermediate landing airport within the arrival center
will not be accepted without coordination with andthe approval of the ATCSCC.INTERNATIONAL AIRPORT − Relating to interna-
tional flight, it means:
a.An airport of entry which has been designated
by the Secretary of Treasury or Commissioner ofCustoms as an international airport for customsservice.
b.A landing rights airport at which specific
permission to land must be obtained from customsauthorities in advance of contemplated use.
c.Airports designated under the Convention on
International Civil Aviation as an airport for use byinternational commercial air transport and/or interna-
tional general aviation.
(See ICAO term INTERNATIONAL AIRPORT.)
(Refer to Chart Supplement U.S .)
(Refer to IFIM.)
INTERNATIONAL AIRPORT [ICAO] − Any airport
designated by the Contracting State in whoseterritory it is situated as an airport of entry anddeparture for international air traffic, where theformalities incident to customs, immigration, publichealth, animal and plant quarantine and similarprocedures are carried out.
INTERNATIONAL CIVIL A VIATION ORGA-
NIZATION [ICAO] − A specialized agency of the
United Nations whose objective is to develop theprinciples and techniques of international airnavigation and to foster planning and development of
international civil air transport.
a.Regions include:
1.African-Indian Ocean Region
2.Caribbean Region
3.European Region
4.Middle East/Asia Region
5.North American Region
6.North Atlantic Region
7.Pacific Region
8.South American Region
INTERNATIONAL FLIGHT INFORMATION
MANUAL − A publication designed primarily as a
pilot’s preflight planning guide for flights intoforeign airspace and for flights returning to the U.S.from foreign locations.
INTERROGATOR − The ground-based surveillance
radar beacon transmitter -receiver, which normally
scans in synchronism with a primary radar,transmitting discrete radio signals which repetitious-5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG I−6ly request all transponders on the mode being used to
reply. The replies received are mixed with theprimary radar returns and displayed on the same plan
position indicator (radar scope). Also, applied to theairborne element of the TACAN/DME system.
(See TRANSPONDER.)
(Refer to AIM.)
INTERSECTING RUNWAYS − Two or more
runways which cross or meet within their lengths.
(See INTERSECTION.)
INTERSECTION −
a.A point defined by any combination of courses,
radials, or bearings of two or more navigational aids.b.Used to describe the point where two runways,
a runway and a taxiway, or two taxiways cross ormeet.
INTERSECTION DEPARTURE − A departure from
any runway intersection except the end of the runway.
(See INTERSECTION.)
INTERSECTION T AKEOFF −
(See INTERSECTION DEPARTURE.)
IR−
(See IFR MILITARY TRAINING ROUTES.)
ISR– Indicates the confidence level of the track
requires 5NM separation. 3NM separation, 1 1/2NM
separation, and target resolution cannot be used.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG J−1J
JAMMING − Electronic or mechanical interference
which may disrupt the display of aircraft on radar orthe transmission/reception of radio communications/
navigation.
JET BLAST − Jet engine exhaust (thrust stream
turbulence).
(See WAKE TURBULENCE.)
JET ROUTE − A route designed to serve aircraft
operations from 18,000 feet MSL up to and including
flight level 450. The routes are referred to as “J”routes with numbering to identify the designatedroute; e.g., J105.
(See Class A AIRSPACE.)
(Refer to 14 CFR Part 71.)JET STREAM − A migrating stream of high-speed
winds present at high altitudes.
JETTISONING OF EXTERNAL STORES − Air-
borne release of external stores; e.g., tiptanks,ordnance.
(See FUEL DUMPING.)
(Refer to 14 CFR Part 91.)
JOINT USE RESTRICTED AREA −
(See RESTRICTED AREA.)
JUMP ZONE− The airspace directly associated with
a Drop Zone. Vertical and horizontal limits may be
locally defined.
Pilot/Controller Glossary12/10/15
PCG K−1K
KNOWN TRAFFIC − With respect to ATC clear-
ances, means aircraft whose altitude, position, andintentions are known to ATC.
Pilot/Controller Glossary12/10/15
PCG L−1L
LAA−
(See LOCAL AIRPORT ADVISORY.)
LAAS−
(See LOW ALTITUDE ALERT SYSTEM.)
LAHSO− An acronym for “Land and Hold Short
Operation.” These operations include landing andholding short of an intersecting runway, a taxiway, apredetermined point, or an approach/departureflightpath.
LAHSO-DRY − Land and hold short operations on
runways that are dry.
LAHSO-WET − Land and hold short operations on
runways that are wet (but not contaminated).
LAND AND HOLD SHORT OPERATIONS −
Operations which include simultaneous takeoffs andlandings and/or simultaneous landings when alanding aircraft is able and is instructed by thecontroller to hold-short of the intersecting runway/taxiway or designated hold-short point. Pilots areexpected to promptly inform the controller if the hold
short clearance cannot be accepted.
(See PARALLEL RUNWAYS.)
(Refer to AIM.)
LANDING AREA − Any locality either on land,
water, or structures, including airports/heliports andintermediate landing fields, which is used, orintended to be used, for the landing and takeoff ofaircraft whether or not facilities are provided for theshelter, servicing, or for receiving or dischargingpassengers or cargo.
(See ICAO term LANDING AREA.)
LANDING AREA [ICAO] − That part of a movement
area intended for the landing or take-off of aircraft.
LANDING DIRECTION INDICATOR − A device
which visually indicates the direction in whichlandings and takeoffs should be made.
(See TETRAHEDRON.)
(Refer to AIM.)LANDING DISTANCE A V AILABLE (LDA) − The
runway length declared available and suitable for alanding airplane.
(See ICAO term LANDING DISTANCE
AVAILABLE.)
LANDING DISTANCE A VAILABLE [ICAO] − The
length of runway which is declared available andsuitable for the ground run of an aeroplane landing.
LANDING MINIMUMS − The minimum visibility
prescribed for landing a civil aircraft while using aninstrument approach procedure. The minimumapplies with other limitations set forth in 14 CFRPart 91 with respect to the Minimum DescentAltitude (MDA) or Decision Height (DH) prescribed
in the instrument approach procedures as follows:
a.Straight-in landing minimums. A statement of
MDA and visibility, or DH and visibility, required for
a straight-in landing on a specified runway, or
b.Circling minimums. A statement of MDA and
visibility required for the circle-to-land maneuver.
Note: Descent below the MDA or DH must meet the
conditions stated in 14 CFR Section 91.175.
(See CIRCLE-TO-LAND MANEUVER.)
(See DECISION HEIGHT.)(See INSTRUMENT APPROACH
PROCEDURE.)
(See MINIMUM DESCENT ALTITUDE.)(See STRAIGHT-IN LANDING.)(See VISIBILITY.)
(Refer to 14 CFR Part 91.)
LANDING ROLL − The distance from the point of
touchdown to the point where the aircraft can bebrought to a stop or exit the runway.
LANDING SEQUENCE − The order in which
aircraft are positioned for landing.
(See APPROACH SEQUENCE.)
LAST ASSIGNED ALTITUDE − The last altitude/
flight level assigned by ATC and acknowledged bythe pilot.
(See MAINTAIN.)
(Refer to 14 CFR Part 91.)
LATERAL NA VIGATION (LNA V)– A function of
area navigation (RNA V) equipment which calculates,
Pilot/Controller Glossary 12/10/15
PCG L−2displays, and provides lateral guidance to a profile or
path.
LATERAL SEPARATION − The lateral spacing of
aircraft at the same altitude by requiring operation on
different routes or in dif ferent geographical locations.
(See SEPARATION.)
LDA−
(See LOCALIZER TYPE DIRECTIONAL AID.)
(See LANDING DISTANCE AVAILABLE.)(See ICAO Term LANDING DISTANCE
AVAILABLE.)
LF−
(See LOW FREQUENCY.)
LIGHTED AIRPORT − An airport where runway and
obstruction lighting is available.
(See AIRPORT LIGHTING.)
(Refer to AIM.)
LIGHT GUN − A handheld directional light signaling
device which emits a brilliant narrow beam of white,
green, or red light as selected by the tower controller.The color and type of light transmitted can be used toapprove or disapprove anticipated pilot actions where
radio communication is not available. The light gunis used for controlling traffic operating in the vicinity
of the airport and on the airport movement area.
(Refer to AIM.)
LIGHT-SPORT AIRCRAFT (LSA)- AnFAA-registered aircraft, other than a helicopter orpowered-lift, that meets certain weight andperformance. Principally it is a single engine aircraft
with a maximum of two seats and weighing no morethan 1,430 pounds if intended for operation on water,
or 1,320 pounds if not. They must be of simple design(fixed landing gear (except if intended for operations
on water or a glider) piston powered,non-pressurized, with a fixed or ground adjustablepropeller), Performance is also limited to a maximum
airspeed in level flight of not more than 120 knotsCAS, have a maximum never-exceed speed of notmore than 120 knots CAS for a glider, and have amaximum stalling speed, without the use oflift-enhancing devices (VS1 ) of not more than45 knots CAS. They may be certificated as eitherExperimental LSA or as a Special LSA aircraft. A
minimum of a sport pilot
certificate is required to
operate light-sport aircraft.” (Refer to 14 CFR Part 1,
§1.1.)LINE UP AND WAIT (LUAW) − Used by ATC to
inform a pilot to taxi onto the departure runway to line
up and wait. It is not authorization for takeoff. It isused when takeoff clearance cannot immediately beissued because of traffic or other reasons.
(See CLEARED FOR TAKEOFF.)
LOCAL AIRPORT ADVISORY (LAA) − A service
available only in Alaska and provided by facilities,
which are located on the landing airport, have adiscrete ground −to−air communication frequency or
the tower frequency when the tower is closed,automated weather reporting with voice broadcast-ing, and a continuous ASOS/AWSS/AWOS datadisplay, other continuous direct reading instruments,or manual observations available to the specialist.
(See AIRPORT ADVISORY AREA.)
LOCAL TRAFFIC − Aircraft operating in the traffic
pattern or within sight of the tower, or aircraft known
to be departing or arriving from flight in local practiceareas, or aircraft executing practice instrumentapproaches at the airport.
(See TRAFFIC PATTERN.)
LOCALIZER − The component of an ILS which
provides course guidance to the runway.
(See INSTRUMENT LANDING SYSTEM.)
(See ICAO term LOCALIZER COURSE.)
(Refer to AIM.)
LOCALIZER COURSE [ICAO] − The locus of
points, in any given horizontal plane, at which theDDM (difference in depth of modulation) is zero.
LOCALIZER OFFSET − An angular offset of the
localizer aligned with 3 /C0095 of the runway alignment.
LOCALIZER TYPE DIRECTIONAL AID − A
localizer with an angular offset that exceeds 3 /C0095. of the
runway alignment used for nonprecision instrumentapproaches with utility and accuracy comparable toa localizer but which are not part of a complete ILS.
(Refer to AIM.)
LOCALIZER TYPE DIRECTIONAL AID (LDA)PRECISION RUNWAY MONITOR (PRM)APPROACH − An approach, which includes a
glidslope, used in conjunction with an ILS PRM,RNA V PRM or GLS PRM approach to an adjacentrunway to conduct Simultaneous Offset InstrumentApproaches (SOIA) to parallel runways whosecenterlines are separated by less than 3,000 feet andPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG L−3at least 750 feet. NTZ monitoring is required to
conduct these approaches.
(See SIMULTANEOUS OFFSET INSTRUMENT
APPROACH (SOIA).)
(Refer to AIM)
LOCALIZER USABLE DISTANCE − The maxi-
mum distance from the localizer transmitter at aspecified altitude, as verified by flight inspection, atwhich reliable course information is continuouslyreceived.
(Refer to AIM.)
LOCATOR [ICAO] − An LM/MF NDB used as an aid
to final approach.
Note: A locator usually has an average radius of
rated coverage of between 18.5 and 46.3 km (10and 25 NM).
LONG RANGE NA VIGA TION−
(See LORAN.)
LONGITUDINAL SEPARATION − The longitudi-
nal spacing of aircraft at the same altitude by aminimum distance expressed in units of time ormiles.
(See SEPARATION.)
(Refer to AIM.)
LORAN− An electronic navigational system by
which hyperbolic lines of position are determined by
measuring the difference in the time of reception ofsynchronized pulse signals from two fixed transmit-ters. Loran A operates in the 1750-1950 kHzfrequency band. Loran C and D operate in the100-110 kHz frequency band. In 2010, the U.S. Coast
Guard terminated all U.S. LORAN-C transmissions.
(Refer to AIM.)
LOST COMMUNICATIONS − Loss of the ability to
communicate by radio. Aircraft are sometimesreferred to as NORDO (No Radio). Standard pilot
procedures are specified in 14 CFR Part 91. Radarcontrollers is sue procedures for pilots to follow in the
event of lost communications during a radar approach
when weather reports indicate that an aircraft willlikely encounter IFR weather conditions during theapproach.
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
LOW ALTITUDE AIRWAY STRUCTURE − The
network of airways serving aircraft operations up tobut not including 18,000 feet MSL.
(See AIRWAY.)
(Refer to AIM.)
LOW ALTITUDE ALERT, CHECK YOUR ALTI-
TUDE IMMEDIATELY −
(See SAFETY ALERT.)
LOW APPROACH − An approach over an airport or
runway following an instrument approach or a VFRapproach including the go-around maneuver wherethe pilot intentionally does not make contact with the
runway.
(Refer to AIM.)
LOW FREQUENCY − The frequency band between
30 and 300 kHz.
(Refer to AIM.)
LPV− A type of approach with vertical guidance
(APV) based on WAAS, published on RNA V (GPS)approach charts. This procedure takes advantage ofthe precise lateral guidance available from WAAS.The minima is published as a decision altitude (DA).
LUAW−
(See LINE UP AND WAIT.)
Pilot/Controller Glossary12/10/15
PCG M−1M
MAA−
(See MAXIMUM AUTHORIZED ALTITUDE.)
MACH NUMBER − The ratio of true airspeed to the
speed of sound; e.g., MACH .82, MACH 1.6.
(See AIRSPEED.)
MACH TECHNIQUE [ICAO] − Describes a control
technique used by air traf fic control whereby turbojet
aircraft operating successively along suitable routesare cleared to maintain appropriate MACH numbersfor a relevant portion of the en route phase of flight.The principle objective is to achieve improvedutilization of the airspace and to ensure thatseparation between successive aircraft does notdecrease below the established minima.
MAHWP − Missed Approach Holding Waypoint
MAINTAIN −
a.Concerning altitude/flight level, the term
means to remain at the altitude/flight level specified.The phrase “climb and” or “descend and” normallyprecedes “maintain” and the altitude assignment;e.g., “descend and maintain 5,000.”
b.Concerning other ATC instructions, the term is
used in its literal sense; e.g., maintain VFR.
MAINTENANCE PLANNING FRICTION
LEVEL− The friction level specified in
AC 150/5320-12, Measurement, Construction, andMaintenance of Skid Resistant Airport PavementSurfaces, which represents the friction value belowwhich the runway pavement surface remainsacceptable for any category or class of aircraftoperations but which is beginning to show signs ofdeterioration. This value will vary depending on theparticular friction measurement equipment used.
MAKE SHORT APPROACH − Used by ATC to
inform a pilot to alter his/her traffic pattern so as tomake a short final approach.
(See TRAFFIC PATTERN.)
MAN PORTABLE AIR DEFENSE SYSTEMS(MANP ADS)− MANPADS are lightweight, shoul-
der−launched, missile systems used to bring down
aircraft and create mass casualties. The potential forMANPADS use against airborne aircraft is real andrequires familiarity with the subject. Terrorists
choose MANPADS because the weapons are lowcost, highly mobile, require minimal set −up time, and
are easy to use and maintain. Although the weaponshave limited range, and their accuracy is affected bypoor visibility and adverse weather, they can be fired
from anywhere on land or from boats where there isunrestricted visibility to the target.
MANDATORY ALTITUDE − An altitude depicted
on an instrument Approach Procedure Chartrequiring the aircraft to maintain altitude at thedepicted value.
MANPADS −
(See MAN PORTABLE AIR DEFENSE
SYSTEMS.)
MAP−
(See MISSED APPROACH POINT.)
MARKER BEACON − An electronic navigation
facility transmitting a 75 MHz vertical fan orboneshaped radiation pattern. Marker beacons areidentified by their modulation frequency and keyingcode, and when received by compatible airborneequipment, indicate to the pilot, both aurally andvisually, that he/she is passing over the facility.
(See INNER MARKER.)
(See MIDDLE MARKER.)
(See OUTER MARKER.)
(Refer to AIM.)
MARSA−
(See MILITARY AUTHORITY ASSUMES
RESPONSIBILITY FOR SEPARATION OF
AIRCRAFT.)
MAWP− Missed Approach Waypoint
MAXIMUM AUTHORIZED ALTITUDE − A pub-
lished altitude representing the maximum usablealtitude or flight level for an airspace structure orroute segment. It is the highest altitude on a Federalairway, jet route, area navigation low or high route,or other direct route for which an MEA is designatedin 14 CFR Part 95 at which adequate reception ofnavigation aid signals is assured.
MAYDAY − The international radiotelephony distress
signal. When repeated three times, it indicates
Pilot/Controller Glossary 12/10/15
PCG M−2imminent and grave danger and that immediate
assistance is requested.
(See PAN-PAN.)
(Refer to AIM.)
MCA−
(See MINIMUM CROSSING ALTITUDE.)
MDA−
(See MINIMUM DESCENT ALTITUDE.)
MEA−
(See MINIMUM EN ROUTE IFR ALTITUDE.)
MEARTS −
(See MICRO-EN ROUTE AUTOMATED RADAR
TRACKING SYSTEM.)
METEOROLOGICAL IMPACT STATEMENT −
An unscheduled planning forecast describingconditions expected to begin within 4 to 12 hourswhich may impact the flow of air traffic in a specific
center’s (ARTCC) area.
METER FIX ARC − A semicircle, equidistant from
a meter fix, usually in low altitude relatively close tothe meter fix, used to help CTAS/HOST calculate ameter time, and determine appropriate sector meterlist assignments for aircraft not on an establishedarrival route or assigned a meter fix.
METER FIX TIME/SLOT TIME − A calculated time
to depart the meter fix in order to cross the vertex atthe ACLT. This time reflects descent speedadjustment and any applicable time that must beabsorbed prior to crossing the meter fix.
METER LIST −
(See ARRIV AL SECTOR ADVISORY LIST.)
METER LIST DISPLAY INTERV AL − A dynamic
parameter which controls the number of minutesprior to the flight plan calculated time of arrival at the
meter fix for each aircraft, at which time the TCLT is
frozen and becomes an ACLT; i.e., the VTA isupdated and consequently the TCLT modified asappropriate until frozen at which time updating issuspended and an ACLT is assigned. When frozen,the flight entry is inserted into the arrival sector’smeter list for display on the sector PVD/MDM.MLDI is used if filed true airspeed is less than orequal to freeze speed parameters (FSPD).
METERING − A method of time-regulating arrival
traffic flow into a terminal area so as not to exceed apredetermined terminal acceptance rate.METERING AIRPORTS − Airports adapted for
metering and for which optimum flight paths aredefined. A maximum of 15 airports may be adapted.
METERING FIX − A fix along an established route
from over which aircraft will be metered prior toentering terminal airspace. Normally, this fix shouldbe established at a distance from the airport whichwill facilitate a profile descent 10,000 feet aboveairport elevation (AAE) or above.
METERING POSITION(S) − Adapted PVDs/
MDMs and associated “D” positions eligible fordisplay of a metering position list. A maximum offour PVDs/MDMs may be adapted.
METERING POSITION LIST − An ordered list of
data on arrivals for a selected metering airportdisplayed on a metering position PVD/MDM.
MFT−
(See METER FIX TIME/SLOT TIME.)
MHA−
(See MINIMUM HOLDING ALTITUDE.)
MIA−
(See MINIMUM IFR ALTITUDES.)
MICROBURST − A small downburst with outbursts
of damaging winds extending 2.5 miles or less. Inspite of its small horizontal scale, an intensemicroburst could induce wind speeds as high as 150knots
(Refer to AIM.)
MICRO-EN ROUTE AUTOMATED RADARTRACKING SYSTEM (MEARTS) − An automated
radar and radar beacon tracking system capable ofemploying both short-range (ASR) and long-range(ARSR) radars. This microcomputer driven systemprovides improved tracking, continuous data record-
ing, and use of full digital radar displays.
MID RVR −
(See VISIBILITY.)
MIDDLE COMPASS LOCATOR −
(See COMPASS LOCATOR.)
MIDDLE MARKER − A marker beacon that defines
a point along the glideslope of an ILS normallylocated at or near the point of decision height (ILSCategory I). It is keyed to transmit alternate dots and
dashes, with the alternate dots and dashes keyed at the
rate of 95 dot/dash combinations per minute on a
Pilot/Controller Glossary12/10/15
PCG M−31300 Hz tone, which is received aurally and visually
by compatible airborne equipment.
(See INSTRUMENT LANDING SYSTEM.)
(See MARKER BEACON.)
(Refer to AIM.)
MILES-IN-TRAIL − A specified distance between
aircraft, normally, in the same stratum associatedwith the same destination or route of flight.
MILITARY AUTHORITY ASSUMES RESPONSI-
BILITY FOR SEPARATION OF AIRCRAFT − A
condition whereby the military services involvedassume responsibility for separation betweenparticipating military aircraft in the A TC system. It is
used only for required IFR operations which arespecified in letters of agreement or other appropriate
FAA or military documents.
MILITARY LANDING ZONE − A landing strip used
exclusively by the military for training. A militarylanding zone does not carry a runway designation.
MILITARY OPERATIONS AREA −
(See SPECIAL USE AIRSPACE.)
MILITARY TRAINING ROUTES − Airspace of
defined vertical and lateral dimensions establishedfor the conduct of military flight training at airspeedsin excess of 250 knots IAS.
(See IFR MILITARY TRAINING ROUTES.)
(See VFR MILITARY TRAINING ROUTES.)
MINIMA −
(See MINIMUMS.)
MINIMUM CROSSING ALTITUDE − The lowest
altitude at certain fixes at which an aircraft must cross
when proceeding in the direction of a higherminimum en route IFR altitude (MEA).
(See MINIMUM EN ROUTE IFR ALTITUDE.)
MINIMUM DESCENT ALTITUDE − The lowest
altitude, expressed in feet above mean sea level, towhich descent is authorized on final approach orduring circle-to-land maneuvering in execution of astandard instrument approach procedure where noelectronic glideslope is provided.
(See NONPRECISION APPROACH
PROCEDURE.)
MINIMUM EN ROUTE IFR ALTITUDE (MEA) −
The lowest published altitude between radio fixeswhich assures acceptable navigational signal cover-
age and meets obstacle clearance requirementsbetween those fixes. The MEA prescribed for aFederal airway or segment thereof, area navigationlow or high route, or other direct route applies to theentire width of the airway , segment, or route between
the radio fixes defining the airway, segment, or route.
(Refer to 14 CFR Part 91.)
(Refer to 14 CFR Part 95.)
(Refer to AIM.)
MINIMUM FRICTION LEVEL − The friction level
specified in AC 150/5320-12, Measurement,Construction, and Maintenance of Skid ResistantAirport Pavement Surfaces, that represents theminimum recommended wet pavement surfacefriction value for any turbojet aircraft engaged inLAHSO. This value will vary with the particularfriction measurement equipment used.
MINIMUM FUEL − Indicates that an aircraft’s fuel
supply has reached a state where, upon reaching thedestination, it can accept little or no delay. This is not
an emergency situation but merely indicates anemergency situation is possible should any unduedelay occur.
(Refer to AIM.)
MINIMUM HOLDING ALTITUDE − The lowest
altitude prescribed for a holding pattern whichassures navigational signal coverage, communica-tions, and meets obstacle clearance requirements.
MINIMUM IFR ALTITUDES (MIA) − Minimum
altitudes for IFR operations as prescribed in 14 CFR
Part 91. These altitudes are published on aeronautical
charts and prescribed in 14 CFR Part 95 for airwaysand routes, and in 14 CFR Part 97 for standardinstrument approach procedures. If no applicableminimum altitude is prescribed in 14 CFR Part 95 or
14 CFR Part 97, the following minimum IFRaltitude applies:
a.In designated mountainous areas, 2,000 feet
above the highest obstacle within a horizontaldistance of 4 nautical miles from the course to beflown; or
b.Other than mountainous areas, 1,000 feet above
the highest obstacle within a horizontal distance of 4nautical miles from the course to be flown; or
Pilot/Controller Glossary 12/10/15
PCG M−4c.As otherwise authorized by the Administrator
or assigned by ATC.
(See MINIMUM CROSSING ALTITUDE.)
(See MINIMUM EN ROUTE IFR ALTITUDE.)(See MINIMUM OBSTRUCTION CLEARANCE
ALTITUDE.)
(See MINIMUM SAFE ALTITUDE.)(See MINIMUM VECTORING ALTITUDE.)(Refer to 14 CFR Part 91.)
MINIMUM NA VIGATION PERFORMANCE
SPECIFICA TION− A set of standards which require
aircraft to have a minimum navigation performancecapability in order to operate in MNPS designatedairspace. In addition, aircraft must be certified bytheir State of Registry for MNPS operation.
MINIMUM NA VIGATION PERFORMANCE
SPECIFICATION AIRSPACE − Designated airspace
in which MNPS procedures are applied betweenMNPS certified and equipped aircraft. Under certainconditions, non-MNPS aircraft can operate inMNPSA. However, standard oceanic separationminima is provided between the non-MNPS aircraft
and other traffic. Currently, the only designatedMNPSA is described as follows:
a.Between FL 285 and FL 420;
b.Between latitudes 27 /C0095N and the North Pole;
c.In the east, the eastern boundaries of the CTAs
Santa Maria Oceanic, Shanwick Oceanic, andReykjavik;
d.In the west, the western boundaries of CTAs
Reykjavik and Gander Oceanic and New YorkOceanic excluding the area west of 60 /C0095W and south
of 38 /C009530’N.
MINIMUM OBSTRUCTION CLEARANCE ALTI-
TUDE (MOCA) − The lowest published altitude in
effect between radio fixes on VOR airways,off-airway routes, or route segments which meets
obstacle clearance requirements for the entire routesegment and which assures acceptable navigationalsignal coverage only within 25 statute (22 nautical)miles of a VOR.
(Refer to 14 CFR Part 91.)
(Refer to 14 CFR Part 95.)MINIMUM RECEPTION ALTITUDE − The lowest
altitude at which an intersection can be determined.
(Refer to 14 CFR Part 95.)
MINIMUM SAFE AL TITUDE−
a.The minimum altitude specified in 14 CFR
Part 91 for various aircraft operations.
b.Altitudes depicted on approach charts which
provide at least 1,000 feet of obstacle clearance foremergency use. These altitudes will be identified as
Minimum Safe Altitudes or Emergency SafeAltitudes and are established as follows:
1.Minimum Safe Altitude (MSA). Altitudes
depicted on approach charts which provide at least
1,000 feet of obstacle clearance within a 25-mileradius of the navigation facility, waypoint, or airport
reference point upon which the MSA is predicated.
MSAs are for emergency use only and do not
necessarily assure acceptable navigational signalcoverage.
(See ICAO term Minimum Sector Altitude.)
2.Emergency Safe Altitude (ESA). Altitudes
depicted on approach charts which provide at least
1,000 feet of obstacle clearance in nonmountainousareas and 2,000 feet of obstacle clearance indesignated mountainous areas within a 100-mileradius of the navigation facility or waypoint used as
the ESA center. These altitudes are normally used
only in military procedures and are identified on
published procedures as “Emergency Safe
Altitudes.”
MINIMUM SAFE ALTITUDE WARNING − A
function of the ARTS III computer that aids thecontroller by alerting him/her when a tracked ModeC equipped aircraft is below or is predicted by thecomputer to go below a predetermined minimum safe
altitude.
(Refer to AIM.)
MINIMUM SECTOR ALTITUDE [ICAO] − The
lowest altitude which may be used under emergency
conditions which will provide a minimum clearanceof 300 m (1,000 feet) above all obstacles located inan area contained within a sector of a circle of 46 km(25 NM) radius centered on a radio aid to navigation.
MINIMUMS − Weather condition requirements
established for a particular operation or type of
Pilot/Controller Glossary12/10/15
PCG M−5operation; e.g., IFR takeoff or landing, alternate
airport for IFR flight plans, VFR flight, etc.
(See IFR CONDITIONS.)
(See IFR TAKEOFF MINIMUMS AND
DEPARTURE PROCEDURES.)
(See LANDING MINIMUMS.)
(See VFR CONDITIONS.)
(Refer to 14 CFR Part 91.)(Refer to AIM.)
MINIMUM VECTORING ALTITUDE (MV A) −
The lowest MSL altitude at which an IFR aircraft will
be vectored by a radar controller, except as otherwiseauthorized for radar approaches, departures, andmissed approaches. The altitude meets IFR obstacleclearance criteria. It may be lower than the published
MEA along an airway or J-route segment. It may beutilized for radar vectoring only upon the controller’s
determination that an adequate radar return is beingreceived from the aircraft being controlled. Chartsdepicting minimum vectoring altitudes are normallyavailable only to the controllers and not to pilots.
(Refer to AIM.)
MINUTES-IN-TRAIL − A specified interval be-
tween aircraft expressed in time. This method wouldmore likely be utilized regardless of altitude.
MIS−
(See METEOROLOGICAL IMPACT
STATEMENT.)
MISSED APPROACH −
a.A maneuver conducted by a pilot when an
instrument approach cannot be completed to alanding. The route of flight and altitude are shown on
instrument approach procedure charts. A pilotexecuting a missed approach prior to the MissedApproach Point (MAP) must continue along the final
approach to the MAP.
b.A term used by the pilot to inform ATC that
he/she is executing the missed approach.
c.At locations where ATC radar service is
provided, the pilot should conform to radar vectorswhen provided by ATC in lieu of the publishedmissed approach procedure.
(See MISSED APPROACH POINT.)
(Refer to AIM.)
MISSED APPROACH POINT − A point prescribed
in each instrument approach procedure at which amissed approach procedure shall be executed if the
required visual reference does not exist.
(See MISSED APPROACH.)
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
MISSED APPROACH PROCEDURE [ICAO] − The
procedure to be followed if the approach cannot becontinued.
MISSED APPROACH SEGMENT −
(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
MLDI−
(See METER LIST DISPLAY INTERVAL.)
MM−
(See MIDDLE MARKER.)
MNPS−
(See MINIMUM NAVIGATION PERFORMANCE
SPECIFICATION.)
MNPSA−
(See MINIMUM NAVIGATION PERFORMANCE −
SPECIFICATION AIRSPACE.)
MOA−
(See MILITARY OPERATIONS AREA.)
MOCA−
(See MINIMUM OBSTRUCTION CLEARANCE
ALTITUDE.)
MODE− The letter or number assigned to a specific
pulse spacing of radio signals transmitted or received
by ground interrogator or airborne transpondercomponents of the Air Traffic Control Radar Beacon
System (ATCRBS). Mode A (military Mode 3) andMode C (altitude reporting) are used in air trafficcontrol.
(See INTERROGATOR.)
(See RADAR.)
(See TRANSPONDER.)
(See ICAO term MODE.)
(Refer to AIM.)
MODE (SSR MODE) [ICAO] − The letter or number
assigned to a specific pulse spacing of theinterrogation signals transmitted by an interrogator.There are 4 modes, A, B, C and D specified in Annex
10, corresponding to four different interrogationpulse spacings.
MODE C INTRUDER ALERT − A function of
certain air traf fic control automated systems designed
to alert radar controllers to existing or pending
Pilot/Controller Glossary 12/10/15
PCG M−6situations between a tracked target (known IFR or
VFR aircraft) and an untracked target (unknown IFR
or VFR aircraft) that requires immediate attention/action.
(See CONFLICT ALERT.)
MONITOR − (When used with communication
transfer) listen on a specific frequency and stand byfor instructions. Under normal circumstances do notestablish communications.
MONITOR ALERT (MA) − A function of the TFMS
that provides traffic management personnel with atool for predicting potential capacity problems inindividual operational sectors. The MA is anindication that traffic management personnel need to
analyze a particular sector for actual activity and todetermine the required action(s), if any, needed tocontrol the demand.
MONITOR ALERT PARAMETER (MAP) − The
number designated for use in monitor alertprocessing by the TFMS. The MAP is designated for
each operational sector for increments of 15 minutes.
MOSAIC/MULTI −SENSOR MODE − Accepts posi-
tional data from multiple radar or ADS −B sites.
Targets are displayed from a single source within aradar sort box according to the hierarchy of thesources assigned.
MOVEMENT AREA − The runways, taxiways, and
other areas of an airport/heliport which are utilizedfor taxiing/hover taxiing, air taxiing, takeoff, andlanding of aircraft, exclusive of loading ramps andparking areas. At those airports/heliports with atower, specific approval for entry onto the movement
area must be obtained from ATC.
(See ICAO term MOVEMENT AREA.)
MOVEMENT AREA [ICAO] − That part of an
aerodrome to be used for the takeoff, landing andtaxiing of aircraft, consisting of the maneuvering area
and the apron(s).
MOVING TARGET INDICATOR − An electronic
device which will permit radar scope presentationonly from targets which are in motion. A partialremedy for ground clutter.
MRA−
(See MINIMUM RECEPTION ALTITUDE.)
MSA−
(See MINIMUM SAFE ALTITUDE.)
MSAW−
(See MINIMUM SAFE ALTITUDE WARNING.)
MTI−
(See MOVING TARGET INDICATOR.)
MTR−
(See MILITARY TRAINING ROUTES.)
MULTICOM − A mobile service not open to public
correspondence used to provide communicationsessential to conduct the activities being performed by
or directed from private aircraft.
MULTIPLE RUNWAYS − The utilization of a
dedicated arrival runway(s) for departures and adedicated departure runway(s) for arrivals whenfeasible to reduce delays and enhance capacity.
MV A−
(See MINIMUM VECTORING ALTITUDE.)
Pilot/Controller Glossary12/10/15
PCG N−1N
NAS−
(See NATIONAL AIRSPACE SYSTEM.)
NATIONAL AIRSPACE SYSTEM − The common
network of U.S. airspace; air navigation facilities,equipment and services, airports or landing areas;aeronautical charts, information and services; rules,regulations and procedures, technical information,and manpower and material. Included are systemcomponents shared jointly with the military.
NATIONAL BEACON CODE ALLOCATION
PLAN AIRSPACE − Airspace over United States
territory located within the North American continent
between Canada and Mexico, including adjacentterritorial waters outward to about boundaries ofoceanic control areas (CTA)/Flight InformationRegions (FIR).
(See FLIGHT INFORMATION REGION.)
NATIONAL FLIGHT DATA CENTER − A facility in
Washington D.C., established by FAA to operate acentral aeronautical information service for thecollection, validation, and dissemination ofaeronautical data in support of the activities ofgovernment, industry, and the aviation community.The information is published in the National FlightData Digest.
(See NATIONAL FLIGHT DATA DIGEST.)
NATIONAL FLIGHT DATA DIGEST − A daily
(except weekends and Federal holidays) publicationof flight information appropriate to aeronauticalcharts, aeronautical publications, Notices to Airmen,
or other media serving the purpose of providingoperational flight data essential to safe and efficientaircraft operations.
NATIONAL SEARCH AND RESCUE PLAN − An
interagency agreement which provides for theeffective utilization of all available facilities in alltypes of search and rescue missions.
NAVAID−
(See NAVIGATIONAL AID.)
NA V AID CLASSES − VOR, VORTAC, and T ACAN
aids are classed according to their operational use.The three classes of NA V AIDs are:
a.T− Terminal.b.L− Low altitude.
c.H− High altitude.
Note: The normal service range for T, L, and H class
aids is found in the AIM. Certain operational
requirements make it necessary to use some of
these aids at greater service ranges thanspecified. Extended range is made possiblethrough flight inspection determinations. Someaids also have lesser service range due to location,
terrain, frequency protection, etc. Restrictions to
service range are listed in Chart Supplement U.S.
NA VIGABLE AIRSPACE − Airspace at and above
the minimum flight altitudes prescribed in the CFRsincluding airspace needed for safe takeoff andlanding.
(Refer to 14 CFR Part 91.)
NA VIGATION REFERENCE SYSTEM (NRS) −
The NRS is a system of waypoints developed for usewithin the United States for flight planning andnavigation without reference to ground basednavigational aids. The NRS waypoints are located in
a grid pattern along defined latitude and longitudelines. The initial use of the NRS will be in the highaltitude environment in conjunction with the HighAltitude Redesign initiative. The NRS waypoints are
intended for use by aircraft capable of point −to−point
navigation.
NA VIGATION SPECIFICATION [ICAO]− A set of
aircraft and flight crew requirements needed tosupport performance −based navigation operations
within a defined airspace. There are two kinds ofnavigation specifications:
a.RNP specification. A navigation specification
based on area navigation that includes therequirement for performance monitoring andalerting, designated by the prefix RNP; e.g., RNP 4,RNP APCH.
b.RNA V specification. A navigation specifica-
tion based on area navigation that does not include the
requirement for performance monitoring and alert-ing, designated by the prefix RNA V; e.g., RNA V 5,RNA V 1.
Note: The Performance −based Navigation Manual
(Doc 9613), Volume II contains detailed guidanceon navigation specifications.5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG N−2NA VIGATIONAL AID − Any visual or electronic
device airborne or on the surface which providespoint-to-point guidance information or position data
to aircraft in flight.
(See AIR NAVIGATION FACILITY.)
NBCAP AIRSPACE −
(See NATIONAL BEACON CODE ALLOCATION
PLAN AIRSPACE.)
NDB−
(See NONDIRECTIONAL BEACON.)
NEGA TIVE− “No,” or “permission not granted,” or
“that is not correct.”
NEGATIVE CONTACT − Used by pilots to inform
ATC that:
a.Previously issued traffic is not in sight. It may
be followed by the pilot’s request for the controller toprovide assistance in avoiding the traffic.
b.They were unable to contact ATC on a
particular frequency.
NFDC−
(See NATIONAL FLIGHT DATA CENTER.)
NFDD−
(See NATIONAL FLIGHT DATA DIGEST.)
NIGHT− The time between the end of evening civil
twilight and the beginning of morning civil twilight,as published in the Air Almanac, converted to localtime.
(See ICAO term NIGHT.)
NIGHT [ICAO] − The hours between the end of
evening civil twilight and the beginning of morningcivil twilight or such other period between sunset and
sunrise as may be specified by the appropriateauthority.
Note: Civil twilight ends in the evening when the
center of the sun’s disk is 6 degrees below the
horizon and begins in the morning when the center
of the sun’s disk is 6 degrees below the horizon.
NO GYRO APPROACH − A radar approach/vector
provided in case of a malfunctioning gyro-compassor directional gyro. Instead of providing the pilotwith headings to be flown, the controller observes the
radar track and issues control instructions “turnright/left” or “stop turn” as appropriate.
(Refer to AIM.)
NO GYRO VECTOR −
(See NO GYRO APPROACH.)NO TRANSGRESSION ZONE (NTZ) − The NTZ is
a 2,000 foot wide zone, located equidistant betweenparallel runway or SOIA final approach courses inwhich flight is normally not allowed.
NONAPPROACH CONTROL TOWER − Author-
izes aircraft to land or takeof f at the airport controlled
by the tower or to transit the Class D airspace. Theprimary function of a nonapproach control tower isthe sequencing of aircraft in the traffic pattern and onthe landing area. Nonapproach control towers alsoseparate aircraft operating under instrument flightrules clearances from approach controls and centers.They provide ground control services to aircraft,vehicles, personnel, and equipment on the airportmovement area.
NONCOMMON ROUTE/POR TION− That segment
of a North American Route between the inlandnavigation facility and a designated North American
terminal.
NONCOMPOSITE SEPARATION − Separation in
accordance with minima other than the compositeseparation minimum specified for the area con-cerned.
NONDIRECTIONAL BEACON − An L/MF or UHF
radio beacon transm itting nondirectional signals
whereby the pilot of an aircraft equipped withdirection finding equipment can determine his/herbearing to or from the radio beacon and “home” on or
track to or from the station. When the radio beacon isinstalled in conjunction with the Instrument LandingSystem marker, it is normally called a CompassLocator.
(See AUTOMATIC DIRECTION FINDER.)
(See COMPASS LOCATOR.)
NONMOVEMENT AREAS − Taxiways and apron
(ramp) areas not under the control of air traffic.
NONPRECISION APPROACH −
(See NONPRECISION APPROACH
PROCEDURE.)
NONPRECISION APPROACH PROCEDURE − A
standard instrument approach procedure in which no
electronic glideslope is provided; e.g., VOR,TACAN, NDB, LOC, ASR, LDA, or SDFapproaches.
NONRADAR − Precedes other terms and generally
means without the use of radar, such as:
a.Nonradar Approach. Used to describe
instrument approaches for which course guidance onPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG N−3final approach is not provided by ground-based
precision or surveillance radar. Radar vectors to thefinal approach course may or may not be provided by
ATC. Examples of nonradar approaches are VOR,NDB, TACAN, ILS, RNA V , and GLS approaches.
(See FINAL APPROACH COURSE.)
(See FINAL APPROACH-IFR.)
(See INSTRUMENT APPROACH
PROCEDURE.)
(See RADAR APPROACH.)
b.Nonradar Approach Control. An ATC facility
providing approach control service without the use of
radar.
(See APPROACH CONTROL FACILITY.)
(See APPROACH CONTROL SERVICE.)
c.Nonradar Arrival. An aircraft arriving at an
airport without radar service or at an airport served by
a radar facility and radar contact has not beenestablished or has been terminated due to a lack ofradar service to the airport.
(See RADAR ARRIVAL.)
(See RADAR SERVICE.)
d.Nonradar Route. A flight path or route over
which the pilot is performing his/her own navigation.
The pilot may be receiving radar separation, radarmonitoring, or other ATC services while on anonradar route.
(See RADAR ROUTE.)
e.Nonradar Separation. The spacing of aircraft in
accordance with established minima without the useof radar; e.g., vertical, lateral, or longitudinalseparation.
(See RADAR SEPARATION.)
(See ICAO term NONRADAR SEPARATION.)
NONRADAR SEPARATION [ICAO] − The
separation used when aircraft position information is
derived from sources other than radar.
NON−RESTRICTIVE ROUTING (NRR) − Portions
of a proposed route of flight where a user can flightplan the most advantageous flight path with norequirement to make reference to ground −based
NA V AIDs.
NOPAC−
(See NORTH PACIFIC.)
NORDO (No Radio) − Aircraft that cannot or do not
communicate by radio when radio communication is
required are referred to as “NORDO.”
(See LOST COMMUNICATIONS.)NORMAL OPERATING ZONE (NOZ) − The NOZ
is the operating zone within which aircraft flightremains during normal independent simultaneousparallel ILS approaches.
NORTH AMERICAN ROUTE − A numerically
coded route preplanned over existing airway androute systems to and from specific coastal fixesserving the North Atlantic. North American Routesconsist of the following:
a.Common Route/Portion. That segment of a
North American Route between the inland navigation
facility and the coastal fix.
b.Noncommon Route/Portion. That segment of a
North American Route between the inland navigation
facility and a designated North American terminal.
c.Inland Navigation Facility. A navigation aid on
a North American Route at which the common routeand/or the noncommon route begins or ends.
d.Coastal Fix. A navigation aid or intersection
where an aircraft transitions between the domesticroute structure and the oceanic route structure.
NORTH AMERICAN ROUTE PROGRAM (NRP)−
The NRP is a set of rules and procedures which aredesigned to increase the flexibility of user flightplanning within published guidelines.
NORTH MARK − A beacon data block sent by the
host computer to be displayed by the ARTS on a 360degree bearing at a locally selected radar azimuth and
distance. The North Mark is used to ensure correctrange/azimuth orientation during periods ofCENRAP.
NORTH PACIFIC − An organized route system
between the Alaskan west coast and Japan.
NOTAM−
(See NOTICE TO AIRMEN.)
NOTAM [ICAO] − A notice containing information
concerning the establishment, condition or change in
any aeronautical facility, service, procedure orhazard, the timely knowledge of which is essential to
personnel concerned with flight operations.
a.I Distribution − Distribution by means of
telecommunication.
b.II Distribution − Distribution by means other
than telecommunications.
NOTICE TO AIRMEN − A notice containing
information (not known sufficiently in advance topublicize by other means) concerning the5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG N−4establishment, condition, or change in any
component (facility, service, or procedure of, orhazard in the National Airspace System) the timelyknowledge of which is essential to personnelconcerned with flight operations.
a.NOTAM(D) − A NOTAM given (in addition to
local dissemination) distant dissemination beyondthe area of responsibility of the Flight ServiceStation. These NOTAMs will be stored and available
until canceled.
b.FDC NOTAM − A NOTAM regulatory in
nature, transmitted by USNOF and given systemwide dissemination.
(See ICAO term NOTAM.)
NOTICES TO AIRMEN PUBLICATION − A
publication issued every 28 days, designed primarily
for the pilot, which contains current NOTAMinformation considered essential to the safety of
flight as well as supplemental data to otheraeronautical publications. The contraction NTAP isused in NOTAM text.
(See NOTICE TO AIRMEN.)
NRR−
(See NON −RESTRICTIVE ROUTING.)
NRS−
(See NAVIGATION REFERENCE SYSTEM.)
NTAP−
(See NOTICES TO AIRMEN PUBLICATION.)
NUMEROUS TARGETS VICINITY (LOCA-
TION)− A traffic advisory issued by ATC to advise
pilots that tar gets on the radar scope are too numerous
to issue individually.
(See TRAFFIC ADVISORIES.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG O−1O
OBST ACLE− An existing object, object of natural
growth, or terrain at a fixed geographical location orwhich may be expected at a fixed location within aprescribed area with reference to which verticalclearance is or must be provided during flightoperation.
OBSTACLE DEP ARTURE PROCEDURE (ODP)−
A preplanned instrument flight rule (IFR) departureprocedure printed for pilot use in textual or graphicform to provide obstruction clearance via the leastonerous route from the terminal area to theappropriate en route structure. ODPs are recom-mended for obstruction clearance and may be flownwithout ATC clearance unless an alternate departureprocedure (SID or radar vector) has been specifically
assigned by ATC.
(See IFR TAKEOFF MINIMUMS AND
DEPARTURE PROCEDURES.)
(See STANDARD INSTRUMENT
DEPARTURES.)
(Refer to AIM.)
OBSTACLE FREE ZONE − The OFZ is a three
dimensional volume of airspace which protects forthe transition of aircraft to and from the runway. TheOFZ clearing standard precludes taxiing and parkedairplanes and object penetrations, except forfrangible NA V AID locations that are fixed byfunction. Additionally, vehicles, equipment, andpersonnel may be authorized by air traffic control toenter the area using the provisions of FAAO JO7110.65, Para 3 −1−5, VEHICLES/EQUIPMENT/
PERSONNEL ON RUNWAYS. The runway OFZand when applicable, the inner-approach OFZ, andthe inner-transitional OFZ, comprise the OFZ.
a.Runway OFZ. The runway OFZ is a defined
volume of airspace centered above the runway. Therunway OFZ is the airspace above a surface whoseelevation at any point is the same as the elevation ofthe nearest point on the runway centerline. Therunway OFZ extends 200 feet beyond each end of the
runway. The width is as follows:
1.For runways serving large airplanes, the
greater of:
(a)400 feet, or(b)180 feet, plus the wingspan of the most
demanding airplane, plus 20 feet per 1,000 feet ofairport elevation.
2.For runways serving only small airplanes:
(a)300 feet for precision instrument run-
ways.
(b)250 feet for other runways serving small
airplanes with approach speeds of 50 knots, or more.
(c)120 feet for other runways serving small
airplanes with approach speeds of less than 50 knots.
b.Inner-approach OFZ. The inner-approach OFZ
is a defined volume of airspace centered on theapproach area. The inner-approach OFZ applies only
to runways with an approach lighting system. Theinner-approach OFZ begins 200 feet from the runway
threshold at the same elevation as the runwaythreshold and extends 200 feet beyond the last lightunit in the approach lighting system. The width of the
inner-approach OFZ is the same as the runway OFZ
and rises at a slope of 50 (horizontal) to 1 (vertical)from the beginning.
c.Inner-transitional OFZ. The inner transitional
surface OFZ is a defined volume of airspace along the
sides of the runway and inner-approach OFZ andapplies only to precision instrument runways. Theinner-transitional surface OFZ slopes 3 (horizontal)to 1 (vertical) out from the edges of the runway OFZand inner-approach OFZ to a height of 150 feet abovethe established airport elevation.
(Refer to AC 150/5300-13, Chapter 3.)
(Refer to FAAO JO 7110.65, Para 3 −1−5,
VEHICLES/EQUIPMENT/PERSONNEL ON
RUNWAYS.)
OBSTRUCTION − Any object/obstacle exceeding
the obstruction standards specified by 14 CFRPart 77, Subpart C.
OBSTRUCTION LIGHT − A light or one of a group
of lights, usually red or white, frequently mounted ona surface structure or natural terrain to warn pilots ofthe presence of an obstruction.
OCEANIC AIRSPACE − Airspace over the oceans of
the world, considered international airspace, whereoceanic separation and procedures per the Interna-tional Civil Aviation Organization are applied.Responsibility for the provisions of air traf fic control
Pilot/Controller Glossary 12/10/15
PCG O−2service in this airspace is delegated to various
countries, based generally upon geographic proxim-ity and the availability of the required resources.
OCEANIC ERROR REPORT − A report filed when
ATC observes an Oceanic Error as defined by
FAAO 7110.82, Reporting Oceanic Errors.
OCEANIC PUBLISHED ROUTE − A route estab-
lished in international airspace and charted ordescribed in flight information publications, such asRoute Charts, DOD Enroute Charts, Chart Supple-ments, NOTAMs, and Track Messages.
OCEANIC TRANSITION ROUTE − An ATS route
established for the purpose of transitioning aircraftto/from an organized track system.
ODP−
(See OBSTACLE DEPARTURE PROCEDURE.)
OFF COURSE − A term used to describe a situation
where an aircraft has reported a position fix or isobserved on radar at a point not on the A TC-approved
route of flight.
OFF-ROUTE VECTOR − A vector by ATC which
takes an aircraft off a previously assigned route.Altitudes assigned by ATC during such vectorsprovide required obstacle clearance.
OFFSET PARA LLEL RUNWAYS − Staggered
runways having centerlines which are parallel.
OFFSHORE/CONTROL AIRSPACE AREA − That
portion of airspace between the U.S. 12 NM limit and
the oceanic CTA/FIR boundary within which airtraffic control is exercised. These areas areestablished to provide air traffic control services.Offshore/Control Airspace Areas may be classifiedas either Class A airspace or Class E airspace.
OFT−
(See OUTER FIX TIME.)
OM−
(See OUTER MARKER.)
ON COURSE −
a.Used to indicate that an aircraft is established on
the route centerline.b.Used by ATC to advise a pilot making a radar
approach that his/her aircraft is lined up on the finalapproach course.
(See ON-COURSE INDICATION.)
ON-COURSE INDICATION − An indication on an
instrument, which provides the pilot a visual meansof determining that the aircraft is located on thecenterline of a given navigational track, or anindication on a radar scope that an aircraft is on agiven track.
ONE-MINUTE WEATHER − The most recent one
minute updated weather broadcast received by a pilot
from an uncontrolled airport ASOS/AWSS/AWOS.
ONER−
(See OCEANIC NAVIGATIONAL ERROR
REPORT.)
OPERA TIONAL−
(See DUE REGARD.)
OPERATIONS SPECIFICATIONS [ICAO] − The
authorizations, conditions and limitations associated
with the air operator certificate and subject to theconditions in the operations manual.
OPPOSITE DIRECTION AIRCRAFT − Aircraft are
operating in opposite directions when:
a.They are following the same track in reciprocal
directions; or
b.Their tracks are parallel and the aircraft are
flying in reciprocal directions; or
c.Their tracks intersect at an angle of more than
135/C0095.
OPTION APPROACH − An approach requested and
conducted by a pilot which will result in either atouch-and-go, missed approach, low approach,stop-and-go, or full stop landing.
(See CLEARED FOR THE OPTION.)
(Refer to AIM.)
ORGANIZED TRACK SYSTEM − A series of ATS
routes which are fixed and charted; i.e., CEP,NOPAC, or flexible and described by NOTAM; i.e.,NAT TRACK MESSAGE.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG O−3OROCA− An off-route altitude which provides
obstruction clearance with a 1,000 foot buffer innonmountainous terrain areas and a 2,000 foot buffer
in designated mountainous areas within the UnitedStates. This altitude may not provide signal coverage
from ground-based navigational aids, air trafficcontrol radar, or communications coverage.
OTR−
(See OCEANIC TRANSITION ROUTE.)
OTS−
(See ORGANIZED TRACK SYSTEM.)
OUT− The conversation is ended and no response is
expected.
OUTER AREA (associated with Class C airspace) −
Nonregulatory airspace surrounding designatedClass C airspace airports wherein A TC provides radar
vectoring and sequencing on a full-time basis for allIFR and participating VFR aircraft. The serviceprovided in the outer area is called Class C servicewhich includes: IFR/IFR −IFR separation; IFR/
VFR−traffic advisories and conflict resolution; and
VFR/VFR −traffic advisories and, as appropriate,
safety alerts. The normal radius will be 20 nauticalmiles with some variations based on site-specificrequirements. The outer area extends outward fromthe primary Class C airspace airport and extends fromthe lower limits of radar/radio coverage up to theceiling of the approach control’s delegated airspaceexcluding the Class C charted area and other airspace
as appropriate.
(See CONFLICT RESOLUTION.)
(See CONTROLLED AIRSPACE.)
OUTER COMPASS LOCATOR −
(See COMPASS LOCATOR.)
OUTER FIX − A general term used within ATC to
describe fixes in the terminal area, other than the final
approach fix. Aircraft are normally cleared to thesefixes by an Air Route Traffic Control Center or anApproach Control Facility. Aircraft are normallycleared from these fixes to the final approach fix orfinal approach course.
OR
OUTER FIX − An adapted fix along the converted
route of flight, prior to the meter fix, for whichcrossing times are calculated and displayed in themetering position list.OUTER FIX ARC − A semicircle, usually about a
50−70 mile radius from a meter fix, usually in high
altitude, which is used by CTAS/HOST to calculateouter fix times and determine appropriate sectormeter list assignments for aircraft on an establishedarrival route that will traverse the arc.
OUTER FIX TIME − A calculated time to depart the
outer fix in order to cross the vertex at the ACLT. The
time reflects descent speed adjustments and anyapplicable delay time that must be absorbed prior tocrossing the meter fix.
OUTER MARKER − A marker beacon at or near the
glideslope intercept altitude of an ILS approach. It iskeyed to transmit two dashes per second on a 400 Hz
tone, which is received aurally and visually bycompatible airborne equipment. The OM is normally
located four to seven miles from the runway threshold
on the extended centerline of the runway.
(See INSTRUMENT LANDING SYSTEM.)
(See MARKER BEACON.)(Refer to AIM.)
OVER− My transmission is ended; I expect a
response.
OVERHEAD MANEUVER − A series of predeter-
mined maneuvers prescribed for aircraft (often information) for entry into the visual flight rules (VFR)
traffic pattern and to proceed to a landing. Anoverhead maneuver is not an instrument flight rules(IFR) approach procedure. An aircraft executing anoverhead maneuver is considered VFR and the IFRflight plan is cancelled when the aircraft reaches the“initial point” on the initial approach portion of themaneuver. The pattern usually specifies thefollowing:
a.The radio contact required of the pilot.
b.The speed to be maintained.
c.An initial approach 3 to 5 miles in length.
d.An elliptical pattern consisting of two 180
degree turns.
e.A break point at which the first 180 degree turn
is started.
f.The direction of turns.
g.Altitude (at least 500 feet above the convention-
al pattern).
h.A “Roll-out” on final approach not less than 1/4
mile from the landing threshold and not less than 300
feet above the ground.
Pilot/Controller Glossary 12/10/15
PCG O−4OVERLYING CENTER − The ARTCC facility that
is responsible for arrival/departure operations at aspecific terminal.
Pilot/Controller Glossary12/10/15
PCG P−1P
P TIME−
(See PROPOSED DEPARTURE TIME.)
P-ACP−
(See PREARRANGED COORDINATION
PROCEDURES.)
PAN-PAN − The international radio-telephony urgen-
cy signal. When repeated three times, indicatesuncertainty or alert followed by the nature of theurgency.
(See MAYDAY.)
(Refer to AIM.)
PAR−
(See PRECISION APPROACH RADAR.)
PAR [ICAO] −
(See ICAO Term PRECISION APPROACH
RADAR.)
PARALLEL ILS APPROACHES − Approaches to
parallel runways by IFR aircraft which, whenestablished inbound toward the airport on theadjacent final approach courses, are radar-separated
by at least 2 miles.
(See FINAL APPROACH COURSE.)
(See SIMULTANEOUS ILS APPROACHES.)
PARALLEL OFFSET ROUTE − A parallel track to
the left or right of the designated or establishedairway/route. Normally associated with Area Navi-gation (RNA V) operations.
(See AREA NAVIGATION.)
PARALLEL RUNWAYS − Two or more runways at
the same airport whose centerlines are parallel. Inaddition to runway number, parallel runways aredesignated as L (left) and R (right) or , if three parallel
runways exist, L (left), C (center), and R (right).
PBCT−
(See PROPOSED BOUNDARY CROSSING
TIME.)
PBN
(See ICAO Term PERFORMANCE −BASED
NAVIGATION.)
PDC−
(See PRE−DEPARTURE CLEARANCE .)PERFORMANCE −BASED NA VIGATION (PBN)
[ICAO]− Area navigation based on performance
requirements for aircraft operating along an ATSroute, on an instrument approach procedure or in adesignated airspace.
Note: Performance requirements are expressed in
navigation specifications (RNAV specification,RNP specification) in terms of accuracy, integrity,continuity, availability, and functionality needed for
the proposed operation in the context of a
particular airspace concept.
PERMANENT ECHO− Radar signals reflected from
fixed objects on the earth’s surface; e.g., buildings,towers, terrain. Permanent echoes are distinguishedfrom “ground clutter” by being definable locationsrather than large areas. Under certain conditions they
may be used to check radar alignment.
PHOTO RECONNAISSANCE − Military activity
that requires locating individual photo targets andnavigating to the targets at a preplanned angle andaltitude. The activity normally requires a lateral route
width of 16 NM and altitude range of 1,500 feet to10,000 feet AGL.
PILOT BRIEFING − A service provided by the FSS
to assist pilots in flight planning. Briefing items mayinclude weather information, NOTAMS, militaryactivities, flow control information, and other itemsas requested.
(Refer to AIM.)
PILOT IN COMMAND − The pilot responsible for
the operation and safety of an aircraft during flighttime.
(Refer to 14 CFR Part 91.)
PILOT WEATHER REPORT − A report of meteoro-
logical phenomena encountered by aircraft in flight.
(Refer to AIM.)
PILOT’S DISCRETION − When used in conjunc-
tion with altitude assignments, means that ATC hasoffered the pilot the option of starting climb ordescent whenever he/she wishes and conducting theclimb or descent at any rate he/she wishes. He/shemay temporarily level off at any intermediatealtitude. However, once he/she has vacated analtitude, he/she may not return to that altitude.
Pilot/Controller Glossary 12/10/15
PCG P−2PIREP−
(See PILOT WEATHER REPORT.)
PITCH POINT − A fix/waypoint that serves as a
transition point from a departure procedure or the low
altitude ground −based navigation structure into the
high altitude waypoint system.
PLANS DISPLAY − A display available in EDST
that provides detailed flight plan and predicted
conflict information in textual format for requestedCurrent Plans and all Trial Plans.
(See EN ROUTE DECISION SUPPORT TOOL)
POFZ−
(See PRECISION OBSTACLE FREE ZONE.)
POINT OUT −
(See RADAR POINT OUT.)
POINT−TO−POINT (PTP) − A level of NRR service
for aircraft that is based on traditional waypoints intheir FMSs or RNA V equipage.
POLAR TRACK STRUCTURE − A system of
organized routes between Iceland and Alaska whichoverlie Canadian MNPS Airspace.
POSITION REPORT − A report over a known
location as transmitted by an aircraft to ATC.
(Refer to AIM.)
POSITION SYMBOL − A computer-generated
indication shown on a radar display to indicate themode of tracking.
POSITIVE CONTROL − The separation of all air
traffic within designated airspace by air trafficcontrol.
PRACTICE INSTRUMENT APPROACH − An
instrument approach procedure conducted by a VFR
or an IFR aircraft for the purpose of pilot training orproficiency demonstrations.
PRE−DEPARTURE CLEARANCE − An application
with the Terminal Data Link System (TDLS) thatprovides clearance information to subscribers,through a service provider, in text to the cockpit orgate printer.PREARRANGED COORDINATION − A standard-
ized procedure which permits an air traf fic controller
to enter the airspace assigned to another air trafficcontroller without verbal coordination. The proce-dures are defined in a facility directive which ensures
approved separation between aircraft.
PREARRANGED COORDINATION PROCE-
DURES− A facility’s standardized procedure that
describes the process by which one controller shallallow an aircraft to penetrate or transit anothercontroller’s airspace in a manner that assuresapproved separation without individual coordination
for each aircraft.
PRECIPITATION − Any or all forms of water
particles (rain, sleet, hail, or snow) that fall from theatmosphere and reach the surface.
PRECIPITATION RADAR WEATHER DE-
SCRIPTIONS − Existing radar systems cannot detect
turbulence. However, there is a direct correlationbetween the degree of turbulence and other weatherfeatures associated with thunderstorms and theweather radar precipitation intensity . Controllers will
issue (where capable) precipitation intensity asobserved by radar when using weather and radarprocessor (WARP) or NAS ground based digitalradars with weather capabilities. When precipitationintensity information is not available, the intensitywill be described as UNKNOWN. When intensitylevels can be determined, they shall be described as:
a.LIGHT (< 30 dBZ)
b.MODERATE (30 to 40 dBZ)
c.HEA VY (> 40 to 50 dBZ)
d.EXTREME (> 50 dBZ)
(Refer to AC 00 −45, Aviation Weather Services.)
PRECISION APPROACH −
(See PRECISION APPROACH PROCEDURE.)
PRECISION APPROACH PROCEDURE − A
standard instrument approach procedure in which an
electronic glideslope/or other type of glidepath isprovided ; e.g., ILS, PAR, and GLS.
(See INSTRUMENT LANDING SYSTEM.)
(See PRECISION APPROACH RADAR.)
Pilot/Controller Glossary12/10/15
PCG P−3PRECISION APPROACH RADAR − Radar equip-
ment in some ATC facilities operated by the FAAand/or the military services at joint-use civil/military
locations and separate military installations to detectand display azimuth, elevation, and range of aircrafton the final approach course to a runway. Thisequipment may be used to monitor certain nonradarapproaches, but is primarily used to conduct aprecision instrument approach (PAR) wherein thecontroller issues guidance instructions to the pilotbased on the aircraft’s position in relation to the final
approach course (azimuth), the glidepath (elevation),
and the distance (range) from the touchdown point onthe runway as displayed on the radar scope.
Note: The abbreviation “PAR” is also used to
denote preferential arrival routes in ARTCC
computers.
(See GLIDEPATH.)
(See PAR.)(See PREFERENTIAL ROUTES.)(See ICAO term PRECISION APPROACH
RADAR.)
(Refer to AIM.)
PRECISION APPROACH RADAR [ICAO] − Pri-
mary radar equipment used to determine the position
of an aircraft during final approach, in terms of lateraland vertical deviations relative to a nominal approachpath, and in range relative to touchdown.
Note: Precision approach radars are designed to
enable pilots of aircraft to be given guidance by
radio communication during the final stages of the
approach to land.
PRECISION OBSTACLE FREE ZONE (POFZ) −
An 800 foot wide by 200 foot long area centered onthe runway centerline adjacent to the thresholddesigned to protect airc raft flying precision
approaches from ground vehicles and other aircraftwhen ceiling is less than 250 feet or visibility is lessthan 3/4 statute mile (or runway visual range below4,000 feet.)
PRECISION RUNWAY MONITOR (PRM)
SYSTEM − Provides air traffic controllers
monitoring the NTZ during simultaneous closeparallel PRM approaches with precision, high update
rate secondary surveillance data. The high update rate
surveillance sensor component of the PRM system is
only required for specific runway or approach courseseparation. The high resolution color monitoringdisplay, Final Monitor Aid (FMA) of the PRMsystem, or other FMA with the same capability,
presents (NTZ) surveillance track data to controllersalong with detailed maps depicting approaches andno transgression zone and is required for allsimultaneous close parallel PRM NTZ monitoringoperations.
(Refer to AIM)
PREDICTIVE WIND SHEAR ALERT SYSTEM(PWS)− A self−contained system used onboard some
aircraft to alert the flight crew to the presence of apotential wind shear. PWS systems typically monitor
3 miles ahead and 25 degrees left and right of theaircraft’s heading at or below 1200’ AGL. Departing
flights may receive a wind shear alert after they startthe takeoff roll and may elect to abort the takeoff.Aircraft on approach receiving an alert may elect togo around or perform a wind shear escape maneuver.
PREFERENTIAL ROUTES − Preferential routes
(PDRs, PARs, and PDARs) are adapted in ARTCCcomputers to accomplish inter/intrafacility controller
coordination and to assure that flight data is posted at
the proper control positions. Locations having a needfor these specific inbound and outbound routesnormally publish such routes in local facilitybulletins, and their use by pilots minimizes flightplan route amendments. When the workload or traffic
situation permits, controllers normally provide radar
vectors or assign requested routes to minimizecircuitous routing. Preferential routes are usuallyconfined to one AR TCC’s area and are referred to by
the following names or acronyms:
a.Preferential Departure Route (PDR). A specific
departure route from an airport or terminal area to an
en route point where there is no further need for flowcontrol. It may be included in an InstrumentDeparture Procedure (DP) or a Preferred IFR Route.
b.Preferential Arrival Route (PAR). A specific
arrival route from an appropriate en route point to an
airport or terminal area. It may be included in aStandard T erminal Arrival (ST AR) or a Preferred IFR
Route. The abbreviation “PAR” is used primarilywithin the ARTCC and should not be confused withthe abbreviation for Precision Approach Radar.
c.Preferential Departure and Arrival Route
(PDAR). A route between two terminals which arewithin or immediately adjacent to one AR TCC’s area.
PDARs are not synonymous with Preferred IFRRoutes but may be listed as such as they doaccomplish essentially the same purpose.
(See PREFERRED IFR ROUTES.)
Pilot/Controller Glossary 12/10/15
PCG P−4PREFERRED IFR ROUTES − Routes established
between busier airports to increase system ef ficiency
and capacity. They normally extend through one ormore ARTCC areas and are designed to achievebalanced traffic flows among high density terminals.
IFR clearances are issued on the basis of these routesexcept when severe weather avoidance procedures orother factors dictate otherwise. Preferred IFR Routesare listed in the Chart Supplement U.S. If a flight is
planned to or from an area having such routes but the
departure or arrival point is not listed in the Chart
Supplement U.S., pilots may use that part of a
Preferred IFR Route which is appropriate for thedeparture or arrival point that is listed. Preferred IFR
Routes are correlated with DPs and STARs and maybe defined by airways, jet routes, direct routesbetween NA V AIDs, Waypoints, NA V AID radials/DME, or any combinations thereof.
(See CENTER’S AREA.)
(See INSTRUMENT DEPARTURE
PROCEDURE.)
(See PREFERENTIAL ROUTES.)
(See STANDARD TERMINAL ARRIVAL.)
(Refer to CHART SUPPLEMENT U.S. )
(Refer to NOTICES TO AIRMEN PUBLICATION.)
PRE-FLIGHT PILOT BRIEFING −
(See PILOT BRIEFING.)
PREVAILING VISIBILITY −
(See VISIBILITY.)
PRIMARY RADAR TARGET − An analog or digital
target, exclusive of a secondary radar target,presented on a radar display.
PRM−
(See ILS PRM APPROACH and PRECISION
RUNWAY MONITOR SYSTEM.)
PROCEDURE TURN − The maneuver prescribed
when it is necessary to reverse direction to establishan aircraft on the intermediate approach segment orfinal approach course. The outbound course,direction of t urn, distance within which the turn must
be completed, and minimum altitude are specified inthe procedure. However, unless otherwise restricted,the point at which the turn may be commenced andthe type and rate of turn are left to the discretion of thepilot.
(See ICAO term PROCEDURE TURN.)
PROCEDURE TURN [ICAO] − A maneuver in
which a turn is made away from a designated trackfollowed by a turn in the opposite direction to permit
the aircraft to intercept and proceed along thereciprocal of the designated track.
Note 1: Procedure turns are designated “left” or
“right” according to the direction of the initial turn.
Note 2: Procedure turns may be designated as
being made either in level flight or while
descending, according to the circumstances ofeach individual approach procedure.
PROCEDURE TURN INBOUND − That point of a
procedure turn maneuver where course reversal hasbeen completed and an aircraft is established inbound
on the intermediate approach segment or finalapproach course. A report of “procedure turninbound” is normally used by ATC as a positionreport for separation purposes.
(See FINAL APPROACH COURSE.)
(See PROCEDURE TURN.)(See SEGMENTS OF AN INSTRUMENT
APPROACH PROCEDURE.)
PROFILE DESCENT − An uninterrupted descent
(except where level flight is required for speedadjustment; e .g., 250 knots at 10,000 feet MSL) from
cruising altitude/level to interception of a glideslopeor to a minimum altitude specified for the initial orintermediate approach segment of a nonprecisioninstrument approach. The profile descent normallyterminates at the approach gate or where theglideslope or other appropriate minimum altitude isintercepted.
PROGRESS REPORT −
(See POSITION REPORT.)
PROGRESSIVE TAXI − Precise taxi instructions
given to a pilot unfamiliar with the airport or issuedin stages as the aircraft proceeds along the taxi route.
PROHIBITED AREA−
(See SPECIAL USE AIRSPACE.)
(See ICAO term PROHIBITED AREA.)
PROHIBITED AREA [ICAO] − An airspace of
defined dimensions, above the land areas or territorial
waters of a State, within which the flight of aircraftis prohibited.
PROMINENT OBSTACLE– An obstacle that meets
one or more of the following conditions:
a.An obstacle which stands out beyond the
adjacent surface of surrounding terrain and immedi-ately projects a noticeable hazard to aircraft in flight.
b.An obstacle, not characterized as low and close
in, whose height is no less than 300 feet above thePilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG P−5departure end of takeoff runway (DER) elevation, is
within 10NM from the DER, and that penetrates that
airport/heliport’s diverse departure obstacle clear-ance surface (OCS).
c.An obstacle beyond 10NM from an airport/heli-
port that requires an obstacle departure procedure(ODP) to ensure obstacle avoidance.
(See OBSTACLE.)
(See OBSTRUCTION.)
PROPOSED BOUNDARY CROSSING TIME −
Each center has a PBCT parameter for each internalairport. Proposed internal flight plans are transmitted
to the adjacent center if the flight time along theproposed route from the departure airport to thecenter boundary is less than or equal to the value ofPBCT or if airport adaptation specifies transmissionregardless of PBCT.
PROPOSED DEPAR TURE TIME − The time that the
aircraft expects to become airborne.
PROTECTED AIRSPACE − The airspace on either
side of an oceanic route/track that is equal to one-half
the lateral separation minimum except wherereduction of protected airspace has been authorized.
PROTECTED SEGMENT- The protected segment is
a segment on the amended TFM route that is to beinhibited from automatic adapted route alteration by
ERAM.
PT−
(See PROCEDURE TURN.)
PTP−
(See POINT −TO−POINT.)
PTS−
(See POLAR TRACK STRUCTURE.)
PUBLISHED INSTRUMENT APPROACH
PROCEDURE VISUAL SEGMENT − A segment on
an IAP chart annotated as “Fly Visual to Airport” or“Fly Visual.” A dashed arrow will indicate the visual
flight path on the profile and plan view with anassociated note on the approximate heading anddistance. The visual segment should be flown as adead reckoning course while maintaining visualconditions.
PUBLISHED ROUTE − A route for which an IFR
altitude has been established and published; e.g.,Federal Airways, Jet Routes, Area NavigationRoutes, Specified Direct Routes.
PWS−
(See PREDICTIVE WIND SHEAR ALERT
SYSTEM.)
Pilot/Controller Glossary12/10/15
PCG Q−1Q
Q ROUTE − ‘Q’ is the designator assigned to
published RNA V routes used by the United States.
QNE− The barometric pressure used for the standard
altimeter setting (29.92 inches Hg.).
QNH− The barometric pressure as reported by a
particular station.
QUADRANT − A quarter part of a circle, centered on
a NA V AID, oriented clockwise from magnetic northas follows: NE quadrant 000-089, SE quadrant
090-179, SW quadrant 180-269, NW quadrant270-359.
QUEUING −
(See STAGING/QUEUING.)
QUICK LOOK − A feature of the EAS and ARTS
which provides the controller the capability todisplay full data blocks of tracked aircraft from other
control positions.
Pilot/Controller Glossary12/10/15
PCG R−1R
RADAR− A device which, by measuring the time
interval between transmission and reception of radio
pulses and correlating the angular orientation of theradiated antenna beam or beams in azimuth and/orelevation, provides information on range, azimuth,and/or elevation of objects in the path of thetransmitted pulses.
a.Primary Radar − A radar system in which a
minute portion of a radio pulse transmitted from a site
is reflected by an object and then received back at thatsite for processing and display at an air traf fic control
facility.
b.Secondary Radar/Radar Beacon (ATCRBS) − A
radar system in which the object to be detected isfitted with cooperative equipment in the form of aradio receiver/transm itter (transponder). Radar
pulses transmitted from the searching transmitter/re-ceiver (interrogator) site are received in thecooperative equipment and used to trigger adistinctive transmission from the transponder. Thisreply transmission, rather than a reflected signal, isthen received back at the transmitter/receiver site forprocessing and display at an air traf fic control facility.
(See INTERROGATOR.)
(See TRANSPONDER.)
(See ICAO term RADAR.)
(Refer to AIM.)
RADAR [ICAO] − A radio detection device which
provides information on range, azimuth and/orelevation of objects.
a.Primary Radar − Radar system which uses
reflected radio signals.
b.Secondary Radar − Radar system wherein a
radio signal transmitted from a radar station initiatesthe transmission of a radio signal from anotherstation.
RADAR ADVISORY − The provision of advice and
information based on radar observations.
(See ADVISORY SERVICE.)
RADAR AL TIMETER −
(See RADIO ALTIMETER.)RADAR APPROACH − An instrument approach
procedure which utilizes Precision Approach Radar(PAR) or Airport Surveillance Radar (ASR).
(See AIRPORT SURVEILLANCE RADAR.)
(See INSTRUMENT APPROACH
PROCEDURE.)
(See PRECISION APPROACH RADAR.)
(See SURVEILLANCE APPROACH.)
(See ICAO term RADAR APPROACH.)(Refer to AIM.)
RADAR APPROACH [ICAO] − An approach,
executed by an aircraft, under the direction of a radar
controller.
RADAR APPROACH CONTROL FACILITY − A
terminal ATC facility that uses radar and nonradarcapabilities to provide approach control services toaircraft arriving, departing, or transiting airspacecontrolled by the facility.
(See APPROACH CONTROL SERVICE.)
a.Provides radar ATC services to aircraft
operating in the vicinity of one or more civil and/ormilitary airports in a terminal area. The facility mayprovide services of a ground controlled approach(GCA); i.e., ASR and PAR approaches. A radarapproach control facility may be operated by FAA,USAF, US Army, USN, USMC, or jointly by FAAand a military service. Specific facility nomencla-tures are used for administrative purposes only andare related to the physical location of the facility andthe operating service generally as follows:
1.Army Radar Approach Control (ARAC)
(Army).
2.Radar Air Traffic Control Facility (RATCF)
(Navy/FAA).
3.Radar Approach Control (RAPCON) (Air
Force/FAA).
4.Terminal Radar Approach Control
(TRACON) (FAA).
5.Air Traffic Control Tower (ATCT) (FAA).
(Only those towers delegated approach controlauthority.)
RADAR ARRIV AL − An aircraft arriving at an
airport served by a radar facility and in radar contact
with the facility.
(See NONRADAR.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG R−2RADAR BEACON −
(See RADAR.)
RADAR CLUTTER [ICAO] − The visual indication
on a radar display of unwanted signals.
RADAR CONTACT −
a.Used by ATC to inform an aircraft that it is
identified using an approved ATC surveillance
source on an air traffic controller’s display and that
radar flight following will be provided until radar
service is terminated. Radar service may also be
provided within the limits of necessity and capability.
When a pilot is informed of “radar contact,” he/sheautomatically discontinues reporting over compuls-ory reporting points.
(See ATC SURVEILLANCE SOURCE.)
(See RADAR CONTACT LOST.)
(See RADAR FLIGHT FOLLOWING.)(See RADAR SERVICE.)(See RADAR SERVICE TERMINATED.)(Refer to AIM.)
b.The term used to inform the controller that the
aircraft is identified and approval is granted for theaircraft to enter the receiving controllers airspace.
(See ICAO term RADAR CONTACT.)
RADAR CONTACT [ICAO] − The situation which
exists when the radar blip or radar position symbol of
a particular aircraft is seen and identified on a radar
display.
RADAR CONT ACT LOST − Used by ATC to inform
a pilot that the surveillance data used to determine the
aircraft’s position is no longer being received, or is no
longer reliable and radar service is no longer beingprovided. The loss may be attributed to severalfactors including the aircraft mer ging with weather or
ground clutter, the aircraft operating below radar line
of sight coverage, the aircraft entering an area of poorradar return, failure of the aircraft’s equipment, or
failure of the surveillance equipment.
(See CLUTTER.)
(See RADAR CONTACT.)
RADAR ENVIRONMENT − An area in which radar
service may be provided.
(See ADDITIONAL SERVICES.)
(See RADAR CONTACT.)(See RADAR SERVICE.)(See TRAFFIC ADVISORIES.)RADAR FLIGHT FOLLOWING − The observation
of the progress of radar identified aircraft, whoseprimary navigation is being provided by the pilot,wherein the controller retains and correlates theaircraft identity with the appropriate target or targetsymbol displayed on the radar scope.
(See RADAR CONTACT.)
(See RADAR SERVICE.)(Refer to AIM.)
RADAR IDENTIFICATION − The process of
ascertaining that an observed radar target is the radar
return from a particular aircraft.
(See RADAR CONTACT.)
(See RADAR SERVICE.)
(See ICAO term RADAR IDENTIFICATION.)
RADAR IDENTIFICATION [ICAO] − The process
of correlating a particular radar blip or radar position
symbol with a specific aircraft.
RADAR IDENTIFIED AIRCRAFT − An aircraft, the
position of which has been correlated with anobserved target or symbol on the radar display.
(See RADAR CONTACT.)
(See RADAR CONTACT LOST.)
RADAR MONIT ORING−
(See RADAR SERVICE.)
RADAR NA VIGATIONAL GUIDANCE −
(See RADAR SERVICE.)
RADAR POINT OUT − An action taken by a
controller to transfer the radar identification of anaircraft to another controller if the aircraft will or may
enter the airspace or protected airspace of anothercontroller and radio communications will not betransferred.
RADAR REQUIRED − A term displayed on charts
and approach plates and included in FDC NOTAMsto alert pilots that segments of either an instrumentapproach procedure or a route are not navigablebecause of either the absence or unusability of aNA V AID. The pilot can expect to be provided radarnavigational guidance while transiting segmentslabeled with this term.
(See RADAR ROUTE.)
(See RADAR SERVICE.)
RADAR ROUTE − A flight path or route over which
an aircraft is vectored. Navigational guidance andaltitude assignments are provided by ATC.
(See FLIGHT PATH.)
(See ROUTE.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG R−3RADAR SEPARA TION−
(See RADAR SERVICE.)
RADAR SER VICE− A term which encompasses one
or more of the following services based on the use of
radar which can be provided by a controller to a pilotof a radar identified aircraft.
a.Radar Monitoring − The radar flight-following
of aircraft, whose primary navigation is beingperformed by the pilot, to observe and note deviations
from its authorized flight path, airway, or route.When being applied specifically to radar monitoringof instrument approaches; i.e., with precisionapproach radar (PAR) or radar monitoring ofsimultaneous ILS,RNA V and GLS approaches, itincludes advice and instructions whenever an aircraft
nears or exceeds the prescribed PAR safety limit orsimultaneous ILS RNA V and GLS no transgressionzone.
(See ADDITIONAL SERVICES.)
(See TRAFFIC ADVISORIES.)
b.Radar Navigational Guidance − Vectoring
aircraft to provide course guidance.
c.Radar Separation − Radar spacing of aircraft in
accordance with established minima.
(See ICAO term RADAR SERVICE.)
RADAR SERVICE [ICAO] − Term used to indicate
a service provided directly by means of radar.
a.Monitoring − The use of radar for the purpose of
providing aircraft with information and advicerelative to significant deviations from nominal flight
path.
b.Separation − The separation used when aircraft
position information is derived from radar sources.
RADAR SERVICE TERMINATED − Used by ATC
to inform a pilot that he/she will no longer beprovided any of the services that could be receivedwhile in radar contact. Radar service is automatically
terminated, and the pilot is not advised in thefollowing cases:
a.An aircraft cancels its IFR flight plan, except
within Class B airspace, Class C airspace, a TRSA,or where Basic Radar service is provided.
b.An aircraft conducting an instrument, visual, or
contact approach has landed or has been instructed tochange to advisory frequency.
c.An arriving VFR aircraft, receiving radar
service to a tower-controlled airport within Class Bairspace, Class C airspace, a TRSA, or where
sequencing service is provided, has landed; or to allother airports, is instructed to change to tower oradvisory frequency.
d.An aircraft completes a radar approach.
RADAR SURVEILLANCE − The radar observation
of a given geographical area for the purpose ofperforming some radar function.
RADAR TRAFFIC ADVISORIES − Advisories
issued to alert pilots to known or observed radartraffic which may affect the intended route of flightof their aircraft.
(See TRAFFIC ADVISORIES.)
RADAR TRAFFIC INFORMATION SER VICE−
(See TRAFFIC ADVISORIES.)
RADAR VECTORING [ICAO] − Provision of
navigational guidance to aircraft in the form ofspecific headings, based on the use of radar.
RADIAL− A magnetic bearing extending from a
VOR/VORTAC/TACAN navigation facility.
RADIO−
a.A device used for communication.
b.Used to refer to a flight service station; e.g.,
“Seattle Radio” is used to call Seattle FSS.
RADIO ALTIMETER − Aircraft equipment which
makes use of the reflection of radio waves from theground to determine the height of the aircraft abovethe surface.
RADIO BEACON −
(See NONDIRECTIONAL BEACON.)
RADIO DETECTION AND RANGING −
(See RADAR.)
RADIO MAGNETIC INDICATOR − An aircraft
navigational instrument coupled with a gyro compass
or similar compass that indicates the direction of aselected NA V AID and indicates bearing with respect
to the heading of the aircraft.
RAIS−
(See REMOTE AIRPORT INFORMATION
SERVICE.)
RAMP−
(See APRON.)
RANDOM ALTITUDE − An altitude inappropriate
for direction of flight and/or not in accordance withFAAO JO 7110.65, Para 4 −5−1, VERTICAL
SEPARATION MINIMA.5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG R−4RANDOM ROUTE − Any route not established or
charted/published or not otherwise available to allusers.
RC−
(See ROAD RECONNAISSANCE.)
RCAG−
(See REMOTE COMMUNICATIONS
AIR/GROUND FACILITY.)
RCC−
(See RESCUE COORDINATION CENTER.)
RCO−
(See REMOTE COMMUNICATIONS OUTLET.)
RCR−
(See RUNWAY CONDITION READING.)
READ BACK − Repeat my message back to me.
RECEIVER AUTONOMOUS INTEGRITY MON-
ITORING (RAIM) − A technique whereby a civil
GNSS receiver/processor determines the integrity ofthe GNSS navigation signals without reference tosensors or non-DoD integrity systems other than thereceiver itself. This determination is achieved by aconsistency check among redundant pseudorangemeasurements.
RECEIVING CONTROLLER − A controller/facility
receiving control of an aircraft from anothercontroller/facility.
RECEIVING FACILITY −
(See RECEIVING CONTROLLER.)
RECONFORMANCE − The automated process of
bringing an aircraft’s Current Plan Trajectory intoconformance with its track.
REDUCE SPEED TO (SPEED) −
(See SPEED ADJUSTMENT.)
REIL−
(See RUNWAY END IDENTIFIER LIGHTS.)
RELEASE TIME − A departure time restriction
issued to a pilot by ATC (either directly or through an
authorized relay) when necessary to separate adeparting aircraft from other traffic.
(See ICAO term RELEASE TIME.)
RELEASE TIME [ICAO] − Time prior to which an
aircraft should be given further clearance or prior towhich it should not proceed in case of radio failure.REMOTE AIRPORT INFORMATION SERVICE
(RAIS)− A temporary service provided by facilities,
which are not located on the landing airport, but have
communication capability and automated weatherreporting available to the pilot at the landing airport.
REMOTE COMMUNICATIONS AIR/GROUND
FACILITY − An unmanned VHF/UHF transmitter/
receiver facility which is used to expand ARTCCair/ground communications coverage and to facilitate
direct contact between pilots and controllers. RCAGfacilities are sometimes not equipped with emergen-cy frequencies 121.5 MHz and 243.0 MHz.
(Refer to AIM.)
REMOTE COMMUNICATIONS OUTLET − An
unmanned communications facility remotely con-trolled by air traffic personnel. RCOs serve FSSs.RTRs serve terminal ATC facilities. An RCO or RTRmay be UHF or VHF and will extend thecommunication range of the air traf fic facility. There
are several classes of RCOs and RTRs. The class isdetermined by the number of transmitters orreceivers. Classes A through G are used primarily for
air/ground purposes. RCO and RTR class Ofacilities are nonprotected outlets subject toundetected and prolonged outages. RCO (O’s) andRTR (O’s) were established for the express purposeof providing ground-to-ground communicationsbetween air traffic control specialists and pilotslocated at a satellite airport for delivering en routeclearances, issuing departure authorizations, andacknowledging instrument flight rules cancellationsor departure/landing times. As a secondary function,they may be used for advisory purposes whenever the
aircraft is below the coverage of the primaryair/ground frequency.
REMOTE TRANSMITTER/RECEIVER −
(See REMOTE COMMUNICATIONS OUTLET.)
REPORT − Used to instruct pilots to advise ATC of
specified information; e.g., “Report passing Hamil-ton VOR.”
REPORTING POINT − A geographical location in
relation to which the position of an aircraft isreported.
(See COMPULSORY REPORTING POINTS.)
(See ICAO term REPORTING POINT.)
(Refer to AIM.)
REPORTING POINT [ICAO] − A specified geo-
graphical location in relation to which the position of
an aircraft can be reported.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG R−5REQUEST FULL ROUTE CLEARANCE − Used
by pilots to request that the entire route of flight beread verbatim in an ATC clearance. Such requestshould be made to precl ude recei ving an ATC
clearance based on the original filed flight plan when
a filed IFR flight plan has been revised by the pilot,company, or operations prior to departure.
REQUIRED NA VIGATION PERFORMANCE
(RNP)– A statement of the navigational performance
necessary for operation within a defined airspace.The following terms are commonly associated withRNP:
a.Required Navigation Performance Level or
Type (RNP-X). A value, in nautical miles (NM), fromthe intended horizontal position within which anaircraft would be at least 95-percent of the total flying
time.
b.Required Navigation Performance (RNP)
Airspace. A generic term designating airspace, route
(s), leg (s), operation (s), or procedure (s) whereminimum required navigational performance (RNP)have been established.
c.Actual Navigation Performance (ANP). A
measure of the current estimated navigational
performance. Also referred to as Estimated PositionError (EPE).
d.Estimated Position Error (EPE). A measure of
the current estimated navigational performance. Alsoreferred to as Actual Navigation Performance (ANP).
e.Lateral Navigation (LNA V). A function of area
navigation (RNA V) equipment which calculates,displays, and provides lateral guidance to a profile or
path.
f.Vertical Navigation (VNA V). A function of area
navigation (RNA V) equipment which calculates,displays, and provides vertical guidance to a profileor path.
RESCUE COORDINATION CENTER − A search
and rescue (SAR) facility equipped and manned tocoordinate and control SAR operations in an areadesignated by the SAR plan. The U.S. Coast Guardand the U.S. Air Force have responsibility for theoperation of RCCs.
(See ICAO term RESCUE CO-ORDINATION
CENTRE.)RESCUE CO-ORDINA TION CENTRE [ICAO] − A
unit responsible for promoting efficient organization
of search and rescue service and for coordinating theconduct of search and rescue operations within asearch and rescue region.
RESOLUTION ADVISORY −A display indication
given to the pilot by the traffic alert and collisionavoidance systems (TCAS II) recommending amaneuver to increase vertical separation relative to an
intruding aircraft. Positive, negative, and verticalspeed limit (VSL) advisories constitute the resolution
advisories. A resolution advisory is also classified as
corrective or preventive
RESTRICTED AREA −
(See SPECIAL USE AIRSPACE.)
(See ICAO term RESTRICTED AREA.)
RESTRICTED AREA [ICAO] − An airspace of
defined dimensions, above the land areas or territorial
waters of a State, within which the flight of aircraftis restricted in accordance with certain specifiedconditions.
RESUME NORMAL SPEED − Used by ATC to
advise a pilot to resume an aircraft’s normal operating
speed. It is issued to terminate a speed adjustmentwhere no published speed restrictions apply. It doesnot delete speed restrictions in published proceduresof upcoming segments of flight. This does not relievethe pilot of those speed restrictions, which areapplicable to 14 CFR Section 91.117.
RESUME OWN NAVIGATION − Used by ATC to
advise a pilot to resume his/her own navigationalresponsibility. It is issued after completion of a radar
vector or when radar contact is lost while the aircraftis being radar vectored.
(See RADAR CONTACT LOST.)
(See RADAR SERVICE TERMINATED.)
RESUME PUBLISHED SPEED- Used by ATC to
advise a pilot to resume published speed restrictionsthat are applicable to a SID, STAR, or otherinstrument procedure. It is issued to terminate a speed
adjustment where speed restrictions are published on
a charted procedure.
RMI−
(See RADIO MAGNETIC INDICATOR.)
RNA V−
(See AREA NAVIGATION (RNAV).)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG R−6RNA V APPROACH − An instrument approach
procedure which relies on aircraft area navigationequipment for navigational guidance.
(See AREA NAVIGATION (RNAV).)
(See INSTRUMENT APPROACH
PROCEDURE.)
ROAD RECONNAISSANCE − Military activity
requiring navigation along roads, railroads, andrivers. Reconnaissance route/route segments areseldom along a straight line and normally require alateral route width of 10 NM to 30 NM and an altitude
range of 500 feet to 10,000 feet AGL.
ROGER − I have received all of your last
transmission. It should not be used to answer aquestion requiring a yes or a no answer.
(See AFFIRMATIVE.)
(See NEGATIVE.)
ROLLOUT RVR −
(See VISIBILITY.)
ROUTE− A defined path, consisting of one or more
courses in a horizontal plane, which aircraft traverseover the surface of the earth.
(See AIRWAY.)
(See JET ROUTE.)(See PUBLISHED ROUTE.)(See UNPUBLISHED ROUTE.)
ROUTE ACTION NOTIFICATION − EDST notifi-
cation that a P AR/PDR/PDAR has been applied to the
flight plan.
(See ATC PREFERRED ROUTE
NOTIFICATION.)
(See EN ROUTE DECISION SUPPORT TOOL)
ROUTE SEGMENT − As used in Air Traf fic Control,
a part of a route that can be defined by twonavigational fixes, two NA V AIDs, or a fix and aNA V AID.
(See FIX.)
(See ROUTE.)(See ICAO term ROUTE SEGMENT.)
ROUTE SEGMENT [ICAO] − A portion of a route to
be flown, as defined by two consecutive significantpoints specified in a flight plan.
RSA−
(See RUNWAY SAFETY AREA.)
RTR−
(See REMOTE TRANSMITTER/RECEIVER.)RUNWAY − A defined rectangular area on a land
airport prepared for the landing and takeoff run ofaircraft along its length. Runways are normallynumbered in relation to their magnetic directionrounded off to the nearest 10 degrees; e.g., Runway1, Runway 25.
(See PARALLEL RUNWAYS.)
(See ICAO term RUNWAY.)
RUNWAY [ICAO] − A defined rectangular area on a
land aerodrome prepared for the landing and take-off
of aircraft.
RUNWAY CENTERLINE LIGHTING −
(See AIRPORT LIGHTING.)
RUNWAY CONDITION READING − Numerical
decelerometer readings relayed by air trafficcontrollers at USAF and certain civil bases for use by
the pilot in determining runway braking action.These readings are routinely relayed only to USAFand Air National Guard Aircraft.
(See BRAKING ACTION.)
RUNWAY END IDENTIFIER LIGHTS −
(See AIRPORT LIGHTING.)
RUNWAY ENTRANC E LIGHTS (REL)—An array
of red lights which include the first light at the holdline followed by a series of evenly spaced lights to the
runway edge aligned with the taxiway centerline, andone additional light at the runway centerline in linewith the last two lights before the runway edge.
RUNWAY GRADIENT − The average slope, mea-
sured in percent, between two ends or points on arunway. Runway gradient is depicted on Government
aerodrome sketches when total runway gradientexceeds 0.3%.
RUNWAY HEADING − The magnetic direction that
corresponds with the runway centerline extended, not
the painted runway number. When cleared to “fly ormaintain runway heading,” pilots are expected to fly
or maintain the heading that corresponds with theextended centerline of the departure runway. Driftcorrection shall not be applied; e.g., Runway 4, actual
magnetic heading of the runway centerline 044, fly044.
RUNWAY IN USE/ACTIVE RUNWAY/DUTY
RUNWAY − Any runway or runways currently being
used for takeoff or landing. When multiple runwaysare used, they are all considered active runways. Inthe metering sense, a selectable adapted item whichspecifies the landing runway configuration orPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG R−7direction of traffic flow. The adapted optimum flight
plan from each transition fix to the vertex isdetermined by the runway configuration for arrivalmetering processing purposes.
RUNWAY LIGHTS −
(See AIRPORT LIGHTING.)
RUNWAY MARKINGS −
(See AIRPORT MARKING AIDS.)
RUNWAY OVERRUN − In military aviation exclu-
sively, a stabilized or paved area beyond the end of a
runway, of the same width as the runway plusshoulders, centered on the extended runwaycenterline.
RUNWAY PROFILE DESCENT − An instrument
flight rules (IFR) air traffic control arrival procedureto a runway published for pilot use in graphic and/ortextual form and may be associated with a STAR.Runway Profile Descents provide routing and maydepict crossing altitudes, speed restrictions, andheadings to be flown from the en route structure to the
point where the pilot will receive clearance for andexecute an instrument approach procedure. ARunway Profile Descent may apply to more than one
runway if so stated on the chart.
(Refer to AIM.)
RUNWAY SAFETY AREA − A defined surface
surrounding the runway prepared, or suitable, forreducing the risk of damage to airplanes in the eventof an undershoot, overshoot, or excursion from therunway. The dimensions of the RSA vary and can be
determined by using the criteria contained withinAC 150/5300-13, Airport Design, Chapter 3.Figure 3−1 in AC 150/5300-13 depicts the RSA. The
design standards dictate that the RSA shall be:
a.Cleared, graded, and have no potentially
hazardous ruts, humps, depressions, or other surface
variations;
b.Drained by grading or storm sewers to prevent
water accumulation;
c.Capable, under dry conditions, of supporting
snow removal equipment, aircraft rescue andfirefighting equipment, and the occasional passage of
aircraft without causing structural damage to theaircraft; and,
d.Free of objects, except for objects that need to
be located in the runway safety area because of theirfunction. These objects shall be constructed on low
impact resistant supports (frangible mounted struc-tures) to the lowest practical height with the frangible
point no higher than 3 inches above grade.
(Refer to AC 150/5300-13, Airport Design,
Chapter 3.)
RUNWAY STATUS LIGHTS (RWSL)
SYSTEM—The RWSL is a system of runway andtaxiway lighting to provide pilots increasedsituational awareness by illuminating runway entrylights (REL) when the runway is unsafe for entry orcrossing, and take-off hold lights (THL) when therunway is unsafe for departure.
RUNWAY TRANSITION −
a.Conventional STARs/SIDs. The portion of a
STAR/SID that serves a particular runway orrunways at an airport.
b.RNA V STARs/SIDs. Defines a path(s) from
the common route to the final point(s) on a STAR. Fora SID, the common route that serves a particularrunway or runways at an airport.
RUNWAY USE PROGRAM − A noise abatement
runway selection plan designed to enhance noiseabatement ef forts with regard to airport communities
for arriving and departing aircraft. These plans aredeveloped into runway use programs and apply to all
turbojet aircraft 12,500 pounds or heavier; turbojetaircraft less than 12,500 pounds are included only ifthe airport proprietor determines that the aircraftcreates a noise problem. Runway use programs arecoordinated with FAA offices, and safety criteriaused in these programs are developed by the Of fice of
Flight Operations. Runway use programs areadministered by the Air Traffic Service as “Formal”or “Informal” programs.
a.Formal Runway Use Program − An approved
noise abatement program which is defined andacknowledged in a Letter of Understanding between
Flight Operations, Air Traffic Service, the airportproprietor, and the users. Once established, participa-
tion in the program is mandatory for aircraft operatorsand pilots as provided for in 14 CFR Section 91.129.
b.Informal Runway Use Program − An approved
noise abatement program which does not require aLetter of Understanding, and participation in theprogram is voluntary for aircraft operators/pilots.
RUNWAY VISIBILITY V ALUE−
(See VISIBILITY.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG R−8RUNWAY VISUAL RANGE −
(See VISIBILITY.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG S−1S
SAA−
(See SPECIAL ACTIVITY AIRSPACE.)
SAFETY ALERT − A safety alert issued by ATC to
aircraft under their control if ATC is aware the aircraft
is at an altitude which, in the controller’s judgment,places the aircraft in unsafe proximity to terrain,obstructions, or other aircraft. The controller maydiscontinue the issuance of further alerts if the pilotadvises he/she is taking action to correct the situation
or has the other aircraft in sight.
a.Terrain/Obstruction Alert− A safety alert issued
by ATC to aircraft under their control if ATC is aware
the aircraft is at an altitude which, in the controller’sjudgment, places the aircraft in unsafe proximity toterrain/obstructions; e.g., “Low Altitude Alert, check
your altitude immediately.”
b.Aircraft Conflict Alert − A safety alert issued by
ATC to aircraft under their control if ATC is aware ofan aircraft that is not under their control at an altitudewhich, in the controlle r’s judgment, places both
aircraft in unsafe proximity to each other. With thealert, ATC will offer the pilot an alternate course ofaction when feasible; e.g., “Traffic Alert, advise youturn right heading zero niner zero or climb to eightthousand immediately.”
Note: The issuance of a safety alert is contingent
upon the capability of the controller to have anawareness of an unsafe condition. The course ofaction provided will be predicated on other trafficunder ATC control. Once the alert is issued, it issolely the pilot’s prerogative to determine what
course of action, if any, he/she will take.
SAFETY LOGIC SYSTEM − A software enhance-
ment to ASDE −3, ASDE −X, and ASDE −3X, that
predicts the path of aircraft landing and/or departing,
and/or vehicular movements on runways. Visual andaural alarms are activated when the safety logicprojects a potential collision. The Airport Movement
Area Safety System (AMASS) is a safety logicsystem enhancement to the ASDE −3. The Safety
Logic System for ASDE −X and ASDE −3X is an
integral part of the software program.
SAFETY LOGIC SYSTEM ALERTS −
a.ALERT− An actual situation involving two real
safety logic tracks (aircraft/aircraft, aircraft/vehicle,or aircraft/other tangible object) that safety logic has
predicted will result in an imminent collision, basedupon the current set of Safety Logic parameters.
b.FALSE ALERT −
1.Alerts generated by one or more false
surface−radar tar gets that the system has interpreted
as real tracks and placed into safety logic.
2.Alerts in which the safety logic software did
not perform correctly, based upon the designspecifications and the current set of Safety Logicparameters.
3.The alert is generated by surface radar tar gets
caused by moderate or greater precipitation.
c.NUISANCE ALERT − An alert in which one or
more of the following is true:
1.The alert is generated by a known situation
that is not considered an unsafe operation, such asLAHSO or other approved operations.
2.The alert is generated by inaccurate secon-
dary radar data received by the Safety Logic System.
3.One or more of the aircraft involved in the
alert is not intending to use a runway (for example,helicopter, pipeline patrol, non −Mode C overflight,
etc.).
d.V ALID NON −ALERT− A situation in which
the safety logic software correctly determines that analert is not required, based upon the designspecifications and the current set of Safety Logicparameters.
e.INV ALID NON −ALERT− A situation in which
the safety logic software did not issue an alert whenan alert was required, based upon the designspecifications.
SAIL BACK − A maneuver during high wind
conditions (usually with power off) where float plane
movement is controlled by water rudders/openingand closing cabin doors.
SAME DIRECTION AIRCRAFT − Aircraft are
operating in the same direction when:
a.They are following the same track in the same
direction; or
b.Their tracks are parallel and the aircraft are
flying in the same direction; or
c.Their tracks intersect at an angle of less than 45
degrees.
Pilot/Controller Glossary 12/10/15
PCG S−2SAR−
(See SEARCH AND RESCUE.)
SAY AGAIN − Used to request a repeat of the last
transmission. Usually specifies transmission orportion thereof not understood or received; e.g., “Say
again all after ABRAM VOR.”
SAY ALTITUDE − Used by ATC to ascertain an
aircraft’s specific altitude/flight level. When theaircraft is climbing or descending, the pilot shouldstate the indicated altitude rounded to the ne arest 100
feet.
SAY HEADING − Used by ATC to request an aircraft
heading. The pilot should state the actual heading ofthe aircraft.
SCHEDULED TIME OF ARRIV AL (STA) − A STA
is the desired time that an aircraft should cross acertain point (landing or metering fix). It takes othertraffic and airspace configuration into account. ASTA time shows the results of the TBFM scheduler
that has calculated an arrival time according toparameters such as optimized spacing, aircraftperformance, and weather.
SDF−
(See SIMPLIFIED DIRECTIONAL FACILITY.)
SEA LANE − A designated portion of water outlined
by visual surface markers for and intended to be usedby aircraft designed to operate on water.
SEARCH AND RESCUE − A service which seeks
missing aircraft and assists those found to be in need
of assistance. It is a cooperative effort using thefacilities and services of available Federal, state andlocal agencies. The U.S. Coast Guard is responsiblefor coordination of search and rescue for the Maritime
Region, and the U.S. Air Force is responsible forsearch and rescue for the Inland Region. Information
pertinent to search and rescue should be passedthrough any air traffic facility or be transmitteddirectly to the Rescue Coordination Center bytelephone.
(See FLIGHT SERVICE STATION.)
(See RESCUE COORDINATION CENTER.)(Refer to AIM.)
SEARCH AND RESCUE FACILITY − A facility
responsible for maintaining and operating a searchand rescue (SAR) service to render aid to persons andproperty in distress. It is any SAR unit, station, NET,
or other operational activity which can be usefullyemployed during an SAR Mission; e.g., a Civil Air
Patrol Wing, or a Coast Guard Station.
(See SEARCH AND RESCUE.)
SECNOT −
(See SECURITY NOTICE.)
SECONDARY RADAR TARGET − A target derived
from a transponder return presented on a radardisplay.
SECTIONAL AERONAUTICAL CHARTS −
(See AERONAUTICAL CHART.)
SECTOR LIST DROP INTERV AL − A parameter
number of minutes after the meter fix time whenarrival aircraft will be deleted from the arrival sector
list.
SECURITY NOTICE (SECNOT) − A SECNOT is a
request originated by the Air Traffic SecurityCoordinator (ATSC) for an extensive communica-tions search for aircraft involved, or suspected ofbeing involved, in a security violation, or areconsidered a security risk. A SECNOT will includethe aircraft identification, search area, and expirationtime. The search area, as defined by the ATSC, could
be a single airport, multiple airports, a radius of anairport or fix, or a route of flight. Once the expiration
time has been reached, the SECNOT is considered tobe cancelled.
SECURITY SERVICES AIRSPACE − Areas
established through the regulatory process or byNOTAM, issued by the Administrator under title 14,CFR, sections 99.7, 91.141, and 91.139, whichspecify that ATC security services are required; i.e.,ADIZ or temporary flight rules areas.
SEE AND A VOID − When weather conditions
permit, pilots operating IFR or VFR are required toobserve and maneuver to avoid other aircraft.Right-of-way rules are contained in 14 CFR Part 91.
SEGMENTED CIRCLE − A system of visual
indicators designed to provide traffic patterninformation at airports without operating controltowers.
(Refer to AIM.)
SEGMENTS OF AN INSTRUMENT APPROACHPROCEDURE − An instrument approach procedure
may have as many as four separate segmentsdepending on how the approach procedure isstructured.
a.Initial Approach − The segment between the
initial approach fix and the intermediate fix or thePilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG S−3point where the aircraft is established on the
intermediate course or final approach course.
(See ICAO term INITIAL APPROACH
SEGMENT.)
b.Intermediate Approach − The segment between
the intermediate fix or point and the final approachfix.
(See ICAO term INTERMEDIATE APPROACH
SEGMENT.)
c.Final Approach − The segment between the final
approach fix or point and the runway, airport, ormissed approach point.
(See ICAO term FINAL APPROACH SEGMENT.)
d.Missed Approach − The segment between the
missed approach point or the point of arrival atdecision height and the missed approach fix at theprescribed altitude.
(Refer to 14 CFR Part 97.)
(See ICAO term MISSED APPROACH
PROCEDURE.)
SEPARATION − In air traffic control, the spacing of
aircraft to achieve their safe and orderly movement in
flight and while landing and taking off.
(See SEPARATION MINIMA.)
(See ICAO term SEPARATION.)
SEPARATION [ICAO] − Spacing between aircraft,
levels or tracks.
SEPARATION MINIMA − The minimum longitudi-
nal, lateral, or vertical distances by which aircraft are
spaced through the application of air traffic controlprocedures.
(See SEPARATION.)
SERVICE − A generic term that designates functions
or assistance available from or rendered by air traffic
control. For example, Class C service would denotethe ATC services provided within a Class C airspacearea.
SEVERE WEATHER A VOIDANCE PLAN − An
approved plan to minimize the affect of severeweather on traffic flows in impacted terminal and/orARTCC areas. SWAP is normally implemented toprovide the least disruption to the ATC system when
flight through portions of airspace is difficult orimpossible due to severe weather.SEVERE WEATHER FORECAST ALERTS −
Preliminary messages issued in order to alert usersthat a Severe Weather Watch Bulletin (WW) is being
issued. These messages define areas of possiblesevere thunderstorms or tornado activity. Themessages are unscheduled and issued as required bythe Storm Prediction Center (SPC) at Norman,Oklahoma.
(See AIRMET.)
(See CONVECTIVE SIGMET.)
(See CWA.)
(See SIGMET.)
SFA−
(See SINGLE FREQUENCY APPROACH.)
SFO−
(See SIMULATED FLAMEOUT.)
SHF−
(See SUPER HIGH FREQUENCY.)
SHORT RANGE CLEARANCE − A clearance
issued to a departing IFR flight which authorizes IFR
flight to a specific fix short of the destination whileair traffic control facilities are coordinating andobtaining the complete clearance.
SHORT TAKEOFF AND LANDING AIRCRAFT −
An aircraft which, at some weight within its approvedoperating weight, is capable of operating from arunway in compliance with the applicable STOLcharacteristics, airworthiness, operations, noise, andpollution standards.
(See VERTICAL TAKEOFF AND LANDING
AIRCRAFT.)
SIAP−
(See STANDARD INSTRUMENT APPROACH
PROCEDURE.)
SID−
(See STANDARD INSTRUMENT DEPARTURE.)
SIDESTEP MANEUVER − A visual maneuver
accomplished by a pilot at the completion of aninstrument approach to permit a straight-in landingon a parallel runway not more than 1,200 feet to eitherside of the runway to which the instrument approachwas conducted.
(Refer to AIM.)
SIGMET − A weather advisory issued concerning
weather significant to the safety of all aircraft.
Pilot/Controller Glossary 12/10/15
PCG S−4SIGMET advisories cover severe and extreme
turbulence, severe icing, and widespread dust orsandstorms that reduce visibility to less than 3 miles.
(See AIRMET.)
(See AWW.)
(See CONVECTIVE SIGMET.)
(See CWA.)
(See ICAO term SIGMET INFORMATION.)
(Refer to AIM.)
SIGMET INFORMATION [ICAO] − Information
issued by a meteorological watch office concerningthe occurrence or expected occurrence of specifieden-route weather phenomena which may affect thesafety of aircraft operations.
SIGNIFICANT METEOROLOGICAL INFOR-
MATION −
(See SIGMET.)
SIGNIFICANT POINT − A point, whether a named
intersection, a NAVAID, a fix derived from aNA V AID(s), or geographical coordinate expressed in
degrees of latitude and longitude, which isestablished for the purpose of providing separation,as a reporting point, or to delineate a route of flight.
SIMPLIFIED DIRECTIONAL FACILITY − A
NA V AID used for nonprecision instrumentapproaches. The final approach course is similar tothat of an ILS localizer except that the SDF coursemay be offset from the runway, generally not morethan 3 degrees, and the course may be wider than the
localizer, resulting in a lower degree of accuracy.
(Refer to AIM.)
SIMULATED FLAMEOUT − A practice approach
by a jet aircraft (normally military) at idle thrust to arunway. The approach may start at a runway (highkey) and may continue on a relatively high and widedownwind leg with a continuous turn to final. Itterminates in landing or low approach. The purposeof this approach is to simulate a flameout.
(See FLAMEOUT.)
SIMULTANEOUS CLOSE PARALLELAPPROACHES- A simultaneous, independentapproach operation permitting ILS/RNA V/GLSapproaches to airports having parallel runwaysseparated by at least 3,000 feet and less than 4300 feet
between centerlines. Aircraft are permitted to passeach other during these simultaneous operations.Integral parts of a total system are radar, NTZmonitoring with enhanced FMA color displays thatinclude aural and visual alerts and predictive aircraft
position software, communications override, ATCprocedures, an Attention All Users Page (AAUP),PRM in the approach name, and appropriate groundbased and airborne equipment. High update ratesurveillance sensor required for certain runway orapproach course separations.
SIMULTANEOUS (CONVERGING)
DEPENDENT APPROACHES-An approachoperation permitting ILS/RNA V/GLS approaches torunways or missed approach courses that intersectwhere required minimum spacing between theaircraft on each final approach course is required.
SIMULTANEOUS (CONVERGING)
INDEPENDENT APPROACHES- An approachoperation permitting ILS/RNA V/GLS approaches tonon-parallel runways where approach proceduredesign maintains the required aircraft spacingthroughout the approach and missed approach andhence the operations may be conductedindependently.
SIMULTANEOUS ILS APPROACHES − An
approach system permitting simultaneous ILSapproaches to airports having parallel runwaysseparated by at least 4,300 feet between centerlines.Integral parts of a total system are ILS, radar,communications, ATC procedures, and appropriateairborne equipment.
(See PARALLEL RUNWAYS.)
(Refer to AIM.)
SIMULTANEOUS OFFSET INSTRUMENT
APPROACH (SOIA) − An instrument landing
system comprised of an ILS PRM, RNA V PRM orGLS PRM approach to one runway and an offsetLDA PRM with glideslope or an RNA V PRM orGLS PRM approach utilizing vertical guidance toanother where parallel runway spaced less than 3,000
feet and at least 750 feet apart. The approach courses
converge by 2.5 to 3 degrees. Simultaneous closeparallel PRM approach procedures apply up to thepoint where the approach course separation becomes
3,000 feet, at the offset MAP. From the offset MAPto the runway threshold, visual separation by theaircraft conducting the offset approach is utilized.
(Refer to AIM)
SIMULTANEOUS (PARALLEL) DEPENDENTAPPROACHES- An approach operation permittingILS/RNA V/GLS approaches to adjacent parallelrunways where prescribed diagonal spacing must be
Pilot/Controller Glossary12/10/15
PCG S−5maintained. Aircraft are not permitted to pass each
other during simultaneous dependent operations.Integral parts of a total system ATC procedures, andappropriate airborne and ground based equipment.
SINGLE DIRECTION ROUTES − Preferred IFR
Routes which are sometimes depicted on highaltitude en route charts and which are normally flown
in one direction only.
(See PREFERRED IFR ROUTES.)
(Refer to CHART SUPPLEMENT U.S.)
SINGLE FREQUENCY APPROACH − A service
provided under a letter of agreement to militarysingle-piloted turbojet aircraft which permits use ofa single UHF frequency during approach for landing.Pilots will not normally be required to changefrequency from the beginning of the approach totouchdown except that pilots conducting an en route
descent are required to change frequency whencontrol is transferred from the air route traf fic control
center to the terminal facility. The abbreviation“SFA” in the DOD FLIP IFR Supplement under“Communications” indicates this service is available
at an aerodrome.
SINGLE-PILOTED AIRCRAFT − A military
turbojet aircraft possessing one set of flight controls,
tandem cockpits, or two sets of flight controls butoperated by one pilot is considered single-piloted byATC when determining the appropriate air trafficservice to be applied.
(See SINGLE FREQUENCY APPROACH.)
SKYSPOTTER − A pilot who has received
specialized training in observing and reportinginflight weather phenomena.
SLASH− A radar beacon reply displayed as an
elongated target.
SLDI−
(See SECTOR LIST DROP INTERVAL.)
SLOT TIME −
(See METER FIX TIME/SLOT TIME.)
SLOW TAXI − To taxi a float plane at low power or
low RPM.
SN−
(See SYSTEM STRATEGIC NAVIGATION.)
SPEAK SLOWER − Used in verbal communications
as a request to reduce speech rate.SPECIAL ACTIVITY AIRSPACE (SAA) − Any
airspace with defined dimensions within the National
Airspace System wherein limitations may beimposed upon aircraft operations. This airspace maybe restricted areas, prohibited areas, militaryoperations areas, air ATC assigned airspace, and any
other designated airspace areas. The dimensions ofthis airspace are programmed into EDST and can bedesignated as either active or inactive by screen entry.
Aircraft trajectories are constantly tested against thedimensions of active areas and alerts issued to theapplicable sectors when violations are predicted.
(See EN ROUTE DECISION SUPPORT TOOL .)
SPECIAL EMERGENCY − A condition of air piracy
or other hostile act by a person(s) aboard an aircraftwhich threatens the safety of the aircraft or itspassengers.
SPECIAL INSTRUMENT APPROACH PROCE-
DURE−
(See INSTRUMENT APPROACH PROCEDURE.)
SPECIAL USE AIRSPACE − Airspace of defined
dimensions identified by an area on the surface of the
earth wherein activities must be confined because oftheir nature and/or wherein limitations may beimposed upon aircraft operations that are not a part of
those activities. Types of special use airspace are:
a.Alert Area− Airspace which may contain a high
volume of pilot training activities or an unusual typeof aerial activity, neither of which is hazardous toaircraft. Alert Areas are depicted on aeronauticalcharts for the information of nonparticipating pilots.All activities within an Alert Area are conducted inaccordance with Federal Aviation Regulations, andpilots of participating aircraft as well as pilotstransiting the area are equally responsible forcollision avoidance.
b.Controlled Firing Area − Airspace wherein
activities are conducted under conditions socontrolled as to eliminate hazards to nonparticipating
aircraft and to ensure the safety of persons andproperty on the ground.
c.Military Operations Area (MOA) − A MOA is
airspace established outside of Class A airspace area
to separate or segregate certain nonhazardousmilitary activities from IFR traffic and to identify for
VFR traffic where these activities are conducted.
(Refer to AIM.)
d.Prohibited Area − Airspace designated under
14 CFR Part 73 within which no person may operate5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG S−6an aircraft without the permission of the using
agency.
(Refer to AIM.)
(Refer to En Route Charts.)
e.Restricted Area − Airspace designated under
14 CFR Part 73, within which the flight of aircraft,while not wholly prohibited, is subject to restriction.Most restricted areas are designated joint use andIFR/VFR operations in the area may be authorized by
the controlling ATC facility when it is not beingutilized by the using agency. Restricted areas aredepicted on en route charts. Where joint use isauthorized, the name of the ATC controlling facilityis also shown.
(Refer to 14 CFR Part 73.)
(Refer to AIM.)
f.Warning Area − A warning area is airspace of
defined dimensions extending from 3 nautical milesoutward from the coast of the United States, thatcontains activity that may be hazar dous to
nonparticipating aircraft. The purpose of suchwarning area is to warn nonparticipating pilots of the
potential danger. A warning area may be located over
domestic or international waters or both.
SPECIAL VFR CONDITIONS − Meteorological
conditions that are less than those required for basicVFR flight in Class B, C, D, or E surface areas andin which some aircraft are permitted flight undervisual flight rules.
(See SPECIAL VFR OPERATIONS.)
(Refer to 14 CFR Part 91.)
SPECIAL VFR FLIGHT [ICAO] − A VFR flight
cleared by air traffic control to operate within ClassB, C, D, and E surface areas in metrologicalconditions below VMC.
SPECIAL VFR OPERATIONS − Aircraft operating
in accordance with clearances within Class B, C, D,and E surface areas in weather conditions less than the
basic VFR weather minima. Such operations must be
requested by the pilot and approved by ATC.
(See SPECIAL VFR CONDITIONS.)
(See ICAO term SPECIAL VFR FLIGHT.)
SPEED−
(See AIRSPEED.)
(See GROUND SPEED.)
SPEED ADJUSTMENT − An A TC procedure used to
request pilots to adjust aircraft speed to a specificvalue for the purpose of providing desired spacing.
Pilots are expected to maintain a speed of plus orminus 10 knots or 0.02 Mach number of the specified
speed. Examples of speed adjustments are:
a.“Increase/reduce speed to Mach point
(number.)”
b.“Increase/reduce speed to (speed in knots)” or
“Increase/reduce speed (number of knots) knots.”
SPEED BRAKES − Moveable aerodynamic devices
on aircraft that reduce airspeed during descent andlanding.
SPEED SEGMENTS − Portions of the arrival route
between the transition point and the vertex along theoptimum flight path for which speeds and altitudesare specified. There is one set of arrival speedsegments adapted from each transition point to eachvertex. Each set may contain up to six segments.
SQUAWK (Mode, Code, Function) − Activate
specific modes/codes/functions on the aircrafttransponder; e.g., “Squawk three/alpha, two one zero
five, low.”
(See TRANSPONDER.)
STA−
(See SCHEDULED TIME OF ARRIVAL.)
STAGING/QUEUING − The placement, integration,
and segregation of departure aircraft in designatedmovement areas of an airport by departure fix, EDCT,
and/or restriction.
STAND BY − Means the controller or pilot must
pause for a few seconds, usually to attend to otherduties of a higher priority. Also means to wait as in“stand by for clearance.” The caller shouldreestablish contact if a delay is lengthy. “Stand by” is
not an approval or denial.
STANDARD INSTRUMENT APPROACH PRO-
CEDURE (SIAP) −
(See INSTRUMENT APPROACH PROCEDURE.)
STANDARD INSTRUMENT DEPAR TURE (SID) −
A preplanned instrument flight rule (IFR) air trafficcontrol (ATC) departure procedure printed forpilot/controller use in graphic form to provideobstacle clearance and a transition from the terminalarea to the appropriate en route structure. SIDs areprimarily designed for system enhancement toexpedite traffic flow and to reduce pilot/controller
Pilot/Controller Glossary12/10/15
PCG S−7workload. ATC clearance must always be received
prior to flying a SID.
(See IFR TAKEOFF MINIMUMS AND
DEPARTURE PROCEDURES.)
(See OBSTACLE DEPARTURE PROCEDURE.)
(Refer to AIM.)
STANDARD RATE TURN − A turn of three degrees
per second.
STANDARD TERMINAL ARRIV AL − A
preplanned instrument flight rule (IFR) air trafficcontrol arrival procedure published for pilot use ingraphic and/or textual form. STARs providetransition from the en route structure to an outer fixor an instrument approach fix/arrival waypoint in theterminal area.
STANDARD TERMINAL ARRIV AL CHARTS −
(See AERONAUTICAL CHART.)
STANDARD TERMINAL AUTOMATION RE-
PLACEMENT SYSTEM (STARS)−
(See DTAS.)
STAR−
(See STANDARD TERMINAL ARRIVAL.)
STATE AIRCRAFT − Aircraft used in military,
customs and police service, in the exclusive serviceof any government, or of any political subdivision,thereof including the government of any state,territory, or possession of the United States or theDistrict of Columbia, but not including anygovernment-owned aircraft engaged in carryingpersons or property for commercial purposes.
STATIC RESTRICTIONS − Those restrictions that
are usually not subject to change, fixed, in place,and/or published.
STATIONARY RESERV ATIONS − Altitude
reservations which encompass activities in a fixedarea. Stationary reservations may include activities,such as special tests of weapons systems orequipment, certain U.S. Navy carrier, fleet, andanti-submarine operations, rocket, missile and drone
operations, and certain aerial refueling or similaroperations.
STEP TAXI − To taxi a float plane at full power or
high RPM.
STEP TURN − A maneuver used to put a float plane
in a planing configuration prior to entering an activesea lane for takeoff. The STEP TURN maneuver
should only be used upon pilot request.
STEPDOWN FIX − A fix permitting additional
descent within a segment of an instrument approachprocedure by identifying a point at which acontrolling obstacle has been safely overflown.
STEREO ROUTE − A routinely used route of flight
established by users and ARTCCs identified by acoded name; e.g., ALPHA 2. These routes minimizeflight plan handling and communications.
STOL AIRCRAFT −
(See SHORT TAKEOFF AND LANDING
AIRCRAFT.)
STOP ALTITUDE SQUAWK − Used by ATC to
inform an aircraft to turn-off the automatic altitudereporting feature of its transponder. It is issued when
the verbally reported altitude varies 300 feet or morefrom the automatic altitude report.
(See ALTITUDE READOUT.)
(See TRANSPONDER.)
STOP AND GO − A procedure wherein an aircraft
will land, make a complete stop on the runway, andthen commence a takeoff from that point.
(See LOW APPROACH.)
(See OPTION APPROACH.)
STOP BURST −
(See STOP STREAM.)
STOP BUZZER −
(See STOP STREAM.)
STOP SQUAWK (Mode or Code) − Used by ATC to
tell the pilot to turn specified functions of the aircraft
transponder off.
(See STOP ALTITUDE SQUAWK.)
(See TRANSPONDER.)
STOP STREAM − Used by ATC to request a pilot to
suspend electronic attack activity.
(See JAMMING.)
STOPOVER FLIGHT PLAN − A flight plan format
which permits in a single submission the filing of asequence of flight plans through interim full-stopdestinations to a final destination.
STOPWAY − An area beyond the takeoff runway no
less wide than the runway and centered upon theextended centerline of the runway, able to support the
airplane during an aborted takeoff, without causingstructural damage to the airplane, and designated by
Pilot/Controller Glossary 12/10/15
PCG S−8the airport authorities for use in decelerating the
airplane during an aborted takeoff.
STRAIGHT-IN APPROACH IFR − An instrument
approach wherein final approach is begun withoutfirst having executed a procedure turn, notnecessarily completed with a straight-in landing ormade to straight-in landing minimums.
(See LANDING MINIMUMS.)
(See STRAIGHT-IN APPROACH VFR.)(See STRAIGHT-IN LANDING.)
STRAIGHT-IN APPROACH VFR − Entry into the
traffic pattern by interception of the extended runway
centerline (final approach course) without executingany other portion of the traffic pattern.
(See TRAFFIC PATTERN.)
STRAIGHT-IN LANDING − A landing made on a
runway aligned within 30 /C0095 of the final approach
course following completion of an instrumentapproach.
(See STRAIGHT-IN APPROACH IFR.)
STRAIGHT-IN LANDING MINIMUMS −
(See LANDING MINIMUMS.)
STRAIGHT-IN MINIMUMS −
(See STRAIGHT-IN LANDING MINIMUMS.)
STRATEGIC PLANNING − Planning whereby
solutions are sought to resolve potential conflicts.
SUBSTITUTE ROUTE − A route assigned to pilots
when any part of an airway or route is unusablebecause of NA V AID status. These routes consist of:
a.Substitute routes which are shown on U.S.
Government charts.
b.Routes defined by ATC as specific NA V AID
radials or courses.
c.Routes defined by ATC as direct to or between
NA V AIDs.
SUNSET AND SUNRISE − The mean solar times of
sunset and sunrise as published in the NauticalAlmanac, converted to local standard time for thelocality concerned. Within Alaska, the end of evening
civil twilight and the beginning of morning civiltwilight, as defined for each locality.SUPPLEMENTAL WEATHER SERVICE
LOCA TION− Airport facilities staffed with contract
personnel who take weather observations andprovide current local weather to pilots via telephoneor radio. (All other services are provided by the parentFSS.)
SUPPS− Refers to ICAO Document 7030 Regional
Supplementary Procedures. SUPPS containprocedures for each ICAO Region which are uniqueto that Region and are not covered in the worldwideprovisions identified in the ICAO Air NavigationPlan. Procedures contained in Chapter 8 are based in
part on those published in SUPPS.
SURFACE AREA − The airspace contained by the
lateral boundary of the Class B, C, D, or E airspacedesignated for an airport that begins at the surface and
extends upward.
SURPIC− A description of surface vessels in the area
of a Search and Rescue incident including theirpredicted positions and their characteristics.
(Refer to FAAO JO 7110.65, Para 10 −6−4,
INFLIGHT CONTINGENCIES.)
SURVEILLANCE APPROACH − An instrument
approach wherein the air traffic controller issuesinstructions, for pilot compliance, based on aircraftposition in relation to the final approach course(azimuth), and the distance (range) from the end ofthe runway as displayed on the controller’s radarscope. The controller will provide recommendedaltitudes on final approach if requested by the pilot.
(Refer to AIM.)
SWAP−
(See SEVERE WEATHER AVOIDANCE PLAN.)
SWSL−
(See SUPPLEMENTAL WEATHER SERVICE
LOCATION.)
SYSTEM STRATEGIC NA VIGATION − Military
activity accomplished by navigating along apreplanned route using internal aircraft systems tomaintain a desired track. This activity normallyrequires a lateral route width of 10 NM and altituderange of 1,000 feet to 6,000 feet AGL with some route
segments that permit terrain following.Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG T−1T
TACAN−
(See TACTICAL AIR NAVIGATION.)
TACAN-ONLY AIRCRAFT − An aircraft, normally
military, possessing TACAN with DME but no VOR
navigational system capability. Clearances mustspecify TACAN or VORTAC fixes and approaches.
TACTICAL AIR NA VIGATION − An ultra-high
frequency electronic rho-theta air navigation aidwhich provides suitably equipped aircraft acontinuous indication of bearing and distance to theTACAN station.
(See VORTAC.)
(Refer to AIM.)
TAILWIND − Any wind more than 90 degrees to the
longitudinal axis of the runway. The magneticdirection of the runway shall be used as the basis for
determining the longitudinal axis.
TAKEOFF AREA −
(See LANDING AREA.)
TAKEOFF DISTANCE A V AILABLE (TODA)– The
takeoff run available plus the length of any remaining
runway or clearway beyond the far end of the takeoff
run available.
(See ICAO term TAKEOFF DISTANCE
AVAILABLE.)
TAKEOFF DIST ANCE A V AILABLE [ICAO] − The
length of the takeoff run available plus the length ofthe clearway, if provided.
TAKEOFF HOLD LIGHTS (THL)– The THL
system is composed of in-pavement lighting in adouble, longitudinal row of lights aligned either side
of the runway centerline. The lights are focusedtoward the arrival end of the runway at the “line upand wait” point, and they extend for 1,500 feet infront of the holding aircraft. Illuminated red lightsindicate to an aircraft in position for takeoff or rolling
that it is unsafe to takeoff because the runway isoccupied or about to be occupied by an aircraft orvehicle.
TAKEOFF ROLL − The process whereby an aircraft
is aligned with the runway centerline and the aircraftis moving with the intent to take of f. For helicopters,this pertains to the act of becoming airborne after
departing a takeoff area.
TAKEOFF RUN A V AILABLE (TORA) – The
runway length declared available and suitable for the
ground run of an airplane taking off.
(See ICAO term TAKEOFF RUN AVAILABLE.)
TAKEOFF RUN A V AILABLE [ICAO] − The length
of runway declared available and suitable for theground run of an aeroplane take-off.
TARGET − The indication shown on an analog
display resulting from a primary radar return or aradar beacon reply.
(See ASSOCIATED.)
(See DIGITAL TARGET.)
(See DIGITIZED RADAR TARGET.)
(See FUSED TARGET)(See PRIMARY RADAR TARGET.)(See RADAR.)(See SECONDARY RADAR TARGET.)
(See TARGET SYMBOL.)
(See ICAO term TARGET.)(See UNASSOCIATED.)
TARGET [ICAO] − In radar:
a.Generally, any discrete object which reflects or
retransmits energy back to the radar equipment.
b.Specifically, an object of radar search or
surveillance.
TARGET RESOLUTION − A process to ensure that
correlated radar targets do not touch. Targetresolution must be applied as follows:
a.Between the edges of two primary targets or the
edges of the ASR-9/11 primary target symbol.
b.Between the end of the beacon control slash and
the edge of a primary target.
c.Between the ends of two beacon control slashes.
Note 1: Mandatory traffic advisories and safety
alerts must be issued when this procedure is used.
Note 2: This procedure must not be used when
utilizing mosaic radar systems or multi −sensor
mode.
TARGET SYMBOL − A computer -generated indica-
tion shown on a radar display resulting from aprimary radar return or a radar beacon reply.
Pilot/Controller Glossary 12/10/15
PCG T−2TARMAC DELAY− The holding of an aircraft on the
ground either before departure or after landing withno opportunity for its passengers to deplane.
TARMAC DELAY AIRCRAFT − An aircraft whose
pilot−in−command has requested to taxi to the ramp,
gate, or alternate deplaning area to comply with theThree−hour T armac Rule.
TARMAC DELAY REQUEST − A request by the
pilot−in−command to taxi to the ramp, gate, or
alternate deplaning location to comply with theThree−hour T armac Rule.
TAS−
(See TERMINAL AUTOMATION SYSTEMS.)
TAWS−
(See TERRAIN AWARENESS WARNING
SYSTEM.)
TAXI− The movement of an airplane under its own
power on the surface of an airport (14 CFRSection 135.100 [Note]). Also, it describes thesurface movement of helicopters equipped withwheels.
(See AIR TAXI.)
(See HOVER TAXI.)
(Refer to 14 CFR Section 135.100.)(Refer to AIM.)
TAXI PATTERNS − Patterns established to illustrate
the desired flow of ground traffic for the differentrunways or airport areas available for use.
TCAS−
(See TRAFFIC ALERT AND COLLISION
AVOIDANCE SYSTEM.)
TCH−
(See THRESHOLD CROSSING HEIGHT.)
TCLT−
(See TENTATIVE CALCULATED LANDING
TIME.)
TDLS−
(See TERMINAL DATA LINK SYSTEM .)
TDZE−
(See TOUCHDOWN ZONE ELEVATION.)
TELEPHONE INFORMATION BRIEFING SER-
VICE− A continuous telephone recording of
meteorological and/or aeronautical information.
(Refer to AIM.)TEMPORARY FLIGHT RESTRICTION (TFR) − A
TFR is a regulatory action issued by the FAA via theU.S. NOTAM System, under the authority of UnitedStates Code, Title 49. TFRs are issued within thesovereign airspace of the United States and itsterritories to restrict certain aircraft from operatingwithin a defined area on a temporary basis to protect
persons or property in the air or on the ground. While
not all inclusive, TFRs may be issued for disaster orhazard situations such as: toxic gas leaks or spills,fumes from flammable agents, aircraft accident/in-cident sites, aviation or ground resources engaged inwildlife suppression, or aircraft relief activitiesfollowing a disaster. TFRs may also be issued insupport of VIP movements; for reasons of nationalsecurity; or when determined necessary for themanagement of air traffic in the vicinity of aerialdemonstrations or major sporting events. NAS users
or other interested parties should contact a FSS forTFR information. Additionally , TFR information can
be found in automated briefings, NOTAM publica-tions, and on the internet at http://www.faa.gov. TheFAA also distributes TFR information to aviationuser groups for further dissemination.
TENTATIVE CALCULA TED LANDING TIME − A
projected time calculated for adapted vertex for each
arrival aircraft based upon runway configuration,airport acceptance rate, airport arrival delay period,and other metered arrival aircraft. This time is eitherthe VTA of the aircraft or the TCLT/ACLT of theprevious aircraft plus the AAI, whichever is later.This time will be updated in response to an aircraft’sprogress and its current relationship to other arrivals.
TERMINAL AREA− A general term used to describe
airspace in which approach control service or airport
traffic control service is provided.
TERMINAL AREA FACILITY − A facility provid-
ing air traffic control service for arriving anddeparting IFR, VFR, Special VFR, and on occasionen route aircraft.
(See APPROACH CONTROL FACILITY.)
(See TOWER.)
TERMINAL AUTOMATION SYSTEMS (TAS) −
TAS is used to identify the numerous automatedtracking systems including ARTS IIE, ARTS IIIA,ARTS IIIE, STARS, and MEARTS.
TERMINAL DATA LINK SYSTEM (TDLS) − A
system that provides Digital Automatic TerminalInformation Service (D −ATIS) both on a specified
Pilot/Controller Glossary12/10/15
PCG T−3radio frequency and also, for subscribers, in a text
message via data link to the cockpit or to a gateprinter. TDLS also provides Pre −departure Clear-
ances (PDC), at selected airports, to subscribers,through a service provider, in text to the cockpit or to
a gate printer. In addition, TDLS will emulate theFlight Data Input/Output (FDIO) information withinthe control tower.
TERMINAL RADAR SERVICE AREA − Airspace
surrounding designated airports wherein ATCprovides radar vectoring, sequencing, and separation
on a full-time basis for all IFR and participating VFR
aircraft. The AIM contains an explanation of TRSA.
TRSAs are depicted on VFR aeronautical charts.Pilot participation is urged but is not mandatory.
TERMINAL VFR RADAR SERVICE − A national
program instituted to extend the terminal radarservices provided instrument flight rules (IFR)aircraft to visual flight rules (VFR) aircraft. Theprogram is divided into four types service referred to
as basic radar service, terminal radar service area(TRSA) service, Class B service and Class C service.
The type of service provided at a particular locationis contained in the Chart Supplement U.S.
a.Basic Radar Service − These services are
provided for VFR aircraft by all commissionedterminal radar facilities. Basic radar service includes
safety alerts, traffic advisories, limited radarvectoring when requested by the pilot, andsequencing at locations where procedures have beenestablished for this purpose and/or when covered bya letter of agreement. The purpose of this service is toadjust the flow of arriving IFR and VFR aircraft into
the traffic pattern in a safe and orderly manner and to
provide traffic advisories to departing VFR aircraft.
b.TRSA Service − This service provides, in
addition to basic radar service, sequencing of all IFR
and participating VFR aircraft to the primary airportand separation between all participating VFRaircraft. The purpose of this service is to provideseparation between all participating VFR aircraft and
all IFR aircraft operating within the area defined as aTRSA.
c.Class C Service − This service provides, in
addition to basic radar service, approved separationbetween IFR and VFR aircraft, and sequencing ofVFR aircraft, and sequencing of VFR arrivals to theprimary airport.d.Class B Service − This service provides, in
addition to basic radar service, approved separationof aircraft based on IFR, VFR, and/or weight, andsequencing of VFR arrivals to the primary airport(s).
(See CONTROLLED AIRSPACE.)
(See TERMINAL RADAR SERVICE AREA.)
(Refer to AIM.)
(Refer to CHART SUPPLEMENT U.S.)
TERMINAL-VERY HIGH FREQUENCY OMNI-
DIRECTIONAL RANGE STA TION− A very high
frequency terminal omnirange station located on ornear an airport and used as an approach aid.
(See NAVIGATIONAL AID.)
(See VOR.)
TERRAIN AWARENESS WARNING SYSTEM
(TAWS)− An on−board, terrain proximity alerting
system providing the aircrew ‘Low Altitudewarnings’ to allow immediate pilot action.
TERRAIN FOLLOWING − The flight of a military
aircraft maintaining a constant AGL altitude abovethe terrain or the highest obstruction. The altitude ofthe aircraft will constantly change with the varyingterrain and/or obstruction.
TETRAHEDRON − A device normally located on
uncontrolled airports and used as a landing direction
indicator. The small end of a tetrahedron points in the
direction of landing. At controlled airports, thetetrahedron, if installed, should be disregardedbecause tower instructions supersede the indicator.
(See SEGMENTED CIRCLE.)
(Refer to AIM.)
TF−
(See TERRAIN FOLLOWING.)
THAT IS CORRECT − The understanding you have
is right.
THREE−HOUR TARMAC RULE– Rule that relates
to Department of T ransportation (DOT) requirements
placed on airlines when tarmac delays are anticipated
to reach 3 hours.
360 OVERHEAD −
(See OVERHEAD MANEUVER.)
THRESHOLD − The beginning of that portion of the
runway usable for landing.
(See AIRPORT LIGHTING.)
(See DISPLACED THRESHOLD.)
THRESHOLD CROSSING HEIGHT − The
theoretical height above the runway threshold at5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG T−4which the aircraft’s glideslope antenna would be if
the aircraft maintains the trajectory established by themean ILS glideslope or the altitude at which thecalculated glidepath of an RNA V or GPS approaches.
(See GLIDESLOPE.)
(See THRESHOLD.)
THRESHOLD LIGHTS −
(See AIRPORT LIGHTING.)
TIBS−
(See TELEPHONE INFORMATION BRIEFING
SERVICE.)
TIE-IN FACILITY– The FSS primarily responsible
for providing FSS services, including telecommu-nications services for landing facilities ornavigational aids located within the boundaries of aflight plan area (FPA). Three-letter identifiers areassigned to each FSS/FPA and are annotated as tie-in
facilities in the Chart Supplement U.S., the Alaska
Supplement, the Pacific Supplement, and FAA Order
JO 7350.8, Location Identifiers. Large consolidatedFSS facilities may have many tie-in facilities or FSSsectors within one facility.
(See FLIGHT PLAN AREA.)
(See FLIGHT SERVICE STATION.)
TIME BASED FLOW MANAGEMENT (TBFM) −
The hardware, software, methods, processes, and
initiatives to manage air traffic flows based on time
to balance air traffic demand with system capacity,
and support the management of PBN. This includes,
but not limited to, Adjacent Center Metering (ACM).
En Route Departure Capability (EDC),
Ground-Interval Management-Spacing (GIM-S),
Integrated Departure/Arrival Capability (IDAC),
Single Center Metering (SCM), Time-Based
Metering (TBM), Time-Based Scheduling (TBS),
and Extended/Coupled Metering.
TIME GROUP − Four digits representing the hour
and minutes from the Coordinated Universal Time(UTC) clock. FAA uses UTC for all operations. Theterm “ZULU” may be used to denote UTC. The word
“local” or the time zone equivalent shall be used todenote local when local time is given during radio and
telephone communications. When written, a timezone designator is used to indicate local time; e.g.“0205M” (Mountain). The local time may be basedon the 24-hour clock system. The day begins at 0000
and ends at 2359.TIS−B−
(See TRAFFIC INFORMATION
SERVICE −BROADCAST.)
TMPA−
(See TRAFFIC MANAGEMENT PROGRAM
ALERT.)
TMU−
(See TRAFFIC MANAGEMENT UNIT.)
TODA−
(See TAKEOFF DISTANCE AVAILABLE.)
(See ICAO term TAKEOFF DISTANCE
AVAILABLE.)
TOI−
(See TRACK OF INTEREST.)
TOP ALTITUDE– In reference to SID published
altitude restrictions the charted “maintain” altitude
contained in the procedure description or assigned by
ATC.
TORA−
(See TAKEOFF RUN AVAILABLE.)
(See ICAO term TAKEOFF RUN AVAILABLE.)
TORCHING − The burning of fuel at the end of an
exhaust pipe or stack of a reciprocating aircraftengine, the result of an excessive richness in the fuel
air mixture.
TOS−
(See TRAJECTORY OPTIONS SET)
TOTAL ESTIMATED ELAPSED TIME [ICAO] −
For IFR flights, the estimated time required fromtake-off to arrive over that designated point, definedby reference to navigation aids, from which it isintended that an instrument approach procedure willbe commenced, or, if no navigation aid is associatedwith the destination aerodrome, to arrive over thedestination aerodrome. For VFR flights, theestimated time required from take-off to arrive overthe destination aerodrome.
(See ICAO term ESTIMATED ELAPSED TIME.)
TOUCH-AND-GO − An operation by an aircraft that
lands and departs on a runway without stopping orexiting the runway.
TOUCH-AND-GO LANDING −
(See TOUCH-AND-GO.)
TOUCHDOWN −
a.The point at which an aircraft first makes
contact with the landing surface.Pilot/Controller Glossary 5/26/16 5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary12/10/15
PCG T−5b.Concerning a precision radar approach (PAR),
it is the point where the glide path intercepts thelanding surface.
(See ICAO term TOUCHDOWN.)
TOUCHDOWN [ICAO] − The point where the
nominal glide path intercepts the runway.
Note: Touchdown as defined above is only a datum
and is not necessarily the actual point at which theaircraft will touch the runway.
TOUCHDOWN RVR −
(See VISIBILITY.)
TOUCHDOWN ZONE − The first 3,000 feet of the
runway beginning at the threshold. The area is usedfor determination of Touchdown Zone Elevation inthe development of straight-in landing minimums forinstrument approaches.
(See ICAO term TOUCHDOWN ZONE.)
TOUCHDOWN ZONE [ICAO] − The portion of a
runway, beyond the threshold, where it is intendedlanding aircraft first contact the runway.
TOUCHDOWN ZONE ELEV ATION − The highest
elevation in the first 3,000 feet of the landing surface.
TDZE is indicated on the instrument approachprocedure chart when straight-in landing minimumsare authorized.
(See TOUCHDOWN ZONE.)
TOUCHDOWN ZONE LIGHTING −
(See AIRPORT LIGHTING.)
TOWER− A terminal facility that uses air/ground
communications, visual signaling, and other devices
to provide ATC services to aircraft operating in thevicinity of an airport or on the movement area.Authorizes aircraft to land or takeoff at the airportcontrolled by the tower or to transit the Class Dairspace area regardless of flight plan or weatherconditions (IFR or VFR). A tower may also provideapproach control services (radar or nonradar).
(See AIRPORT TRAFFIC CONTROL SERVICE.)
(See APPROACH CONTROL FACILITY.)
(See APPROACH CONTROL SERVICE.)
(See MOVEMENT AREA.)
(See TOWER EN ROUTE CONTROL
SERVICE.)
(See ICAO term AERODROME CONTROL
TOWER.)
(Refer to AIM.)TOWER EN ROUTE CONTROL SERVICE − The
control of IFR en route traffic within delegatedairspace between two or more adjacent approachcontrol facilities. This service is designed to expedite
traffic and reduce control and pilot communicationrequirements.
TOWER TO TOWER −
(See TOWER EN ROUTE CONTROL
SERVICE.)
TRACEABLE PRESSURE STANDARD − The
facility station pressure instrument, with certifica-tion/calibration traceable to the National Institute ofStandards and Technol ogy. Traceable pressure
standards may be mercurial barometers, commis-sioned ASOS/AWSS or dual transducer AWOS, orportable pressure standards or DASI.
TRACK− The actual flight path of an aircraft over the
surface of the earth.
(See COURSE.)
(See FLIGHT PATH.)(See ROUTE.)(See ICAO term TRACK.)
TRACK [ICAO] − The projection on the earth’s
surface of the path of an aircraft, the direction ofwhich path at any point is usually expressed indegrees from North (True, Magnetic, or Grid).
TRACK OF INTEREST (TOI) − Displayed data
representing an airborne object that threatens or hasthe potential to threaten North America or NationalSecurity. Indicators may include, but are not limitedto: noncompliance with air traffic control instructions
or aviation regulations; extended loss of communica-tions; unusual transmissions or unusual flightbehavior; unauthorized intrusion into controlledairspace or an ADIZ; noncompliance with issuedflight restrictions/security procedures; or unlawfulinterference with airborne flight crews, up to andincluding hijack. In certain circumstances, an objectmay become a TOI based on specific and credibleintelligence pertaining to that particular aircraft/object, its passengers, or its cargo.
TRACK OF INTEREST RESOLUTION − A TOI
will normally be considered resolved when: theaircraft/object is no longer airborne; the aircraftcomplies with air traffic control instructions, aviation
regulations, and/or issued flight restrictions/securityprocedures; radio contact is re −established and
authorized control of the aircraft is verified; theaircraft is intercepted and intent is verified to be5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG T−6nonthreatening/nonhostile; T OI was identified based
on specific and credible intelligence that was laterdetermined to be invalid or unreliable; or displayeddata is identified and characterized as invalid.
TRAFFIC −
a.A term used by a controller to transfer radar
identification of an aircraft to another controller forthe purpose of coordinating separation action. Trafficis normally issued:
1.In response to a handoff or point out,
2.In anticipation of a handoff or point out, or
3.In conjunction with a request for control of an
aircraft.
b.A term used by ATC to refer to one or more
aircraft.
TRAFFIC ADVISORIES − Advisories issued to alert
pilots to other known or observed air traffic whichmay be in such proximity to the position or intendedroute of flight of their aircraft to warrant theirattention. Such advisories may be based on:
a.Visual observation.
b.Observation of radar identified and nonidenti-
fied aircraft targets on an ATC radar display, or
c.Verbal reports from pilots or other facilities.
Note 1: The word “traffic” followed by additional
information, if known, is used to provide such
advisories; e.g., “T raffic, 2 o’clock, one zero miles,
southbound, eight thousand.”
Note 2: Traffic advisory service will be provided to
the extent possible depending on higher priorityduties of the controller or other limitations; e.g.,radar limitations, volume of traffic, frequency
congestion, or controller workload. Radar/
nonradar traffic advisories do not relieve the pilotof his/her responsibility to see and avoid otheraircraft. Pilots are cautioned that there are manytimes when the controller is not able to give trafficadvisories concerning all traffic in the aircraft’s
proximity; in other words, when a pilot requests or
is receiving traffic advisories, he/she should notassume that all traffic will be issued.
(Refer to AIM.)
TRAFFIC ALERT (aircraft call sign), TURN
(left/right) IMMEDIATELY, (climb/descend) ANDMAINTAIN (altitude).
(See SAFETY ALERT.)
TRAFFIC ALERT AND COLLISION A VOID-ANCE SYSTEM − An airborne collision avoidancesystem based on radar beacon signals which operates
independent of ground-based equipment. TCAS-Igenerates traffic advisories only. TCAS-II generatestraffic advisories, and resolution (collision avoid-ance) advisories in the vertical plane.
TRAFFIC INFORMATION −
(See TRAFFIC ADVISORIES.)
TRAFFIC INFORMATION SERVICE −
BROADCAST (TIS −B)− The broadcast of ATC
derived traffic information to ADS −B equipped
(1090ES or UAT) aircraft. The source of this trafficinformation is derived from ground −based air traffic
surveillance sensors, typically from radar targets.TIS−B service will be available throughout the NAS
where there are both adequate surveillance coverage(radar) and adequate broadcast coverage fromADS−B ground stations. Loss of TIS −B will occur
when an aircraft enters an area not covered by theGBT network. If this occurs in an area with adequate
surveillance coverage (radar), nearby aircraft thatremain within the adequate broadcast coverage(ADS−B) area will view the first aircraft. TIS −B may
continue when an aircraft enters an area withinadequate surveillance coverage (radar); nearbyaircraft that remain within the adequate broadcastcoverage (ADS −B) area will not view the first
aircraft.
TRAFFIC IN SIGHT − Used by pilots to inform a
controller that previously issued traffic is in sight.
(See NEGATIVE CONTACT.)
(See TRAFFIC ADVISORIES.)
TRAFFIC MANAGEMENT PROGRAM ALERT −
A term used in a Notice to Airmen (NOTAM) issued
in conjunction with a special traffic managementprogram to alert pilots to the existence of the program
and to refer them to either the Notices to Airmenpublication or a special traf fic management program
advisory message for program details. The contrac-tion TMPA is used in NOTAM text.
TRAFFIC MANAGEMENT UNIT − The entity in
ARTCCs and designated terminals directly involvedin the active management of facility traffic. Usuallyunder the direct supervision of an assistant managerfor traffic management.
TRAFFIC NO FACTOR − Indicates that the traffic
described in a previously issued traffic advisory is no
factor.
TRAFFIC NO LONGER OBSERVED − Indicates
that the traffic described in a previously issued trafficPilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG T−7advisory is no longer depicted on radar, but may still
be a factor.
TRAFFIC PATTERN − The traffic flow that is
prescribed for aircraft landing at, taxiing on, or taking
off from an airport. The components of a typicaltraffic pattern are upwind leg, crosswind leg,downwind leg, base leg, and final approach.
a.Upwind Leg − A flight path parallel to the
landing runway in the direction of landing.
b.Crosswind Leg − A flight path at right angles to
the landing runway off its upwind end.
c.Downwind Leg − A flight path parallel to the
landing runway in the direction opposite to landing.The downwind leg normally extends between thecrosswind leg and the base leg.
d.Base Leg − A flight path at right angles to the
landing runway off its approach end. The base legnormally extends from the downwind leg to theintersection of the extended runway centerline.
e.Final Approach. A flight path in the direction of
landing along the extended runway centerline. Thefinal approach normally extends from the base leg to
the runway. An aircraft making a straight-in approachVFR is also considered to be on final approach.
(See STRAIGHT-IN APPROACH VFR.)
(See TAXI PATTERNS.)
(See ICAO term AERODROME TRAFFIC
CIRCUIT.)
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
TRAFFIC SITUATION DISPLAY (TSD)− TSD is a
computer system that receives radar track data fromall 20 CONUS ARTCCs, organizes this data into amosaic display , and presents it on a computer screen.
The display allows the traffic management coordina-tor multiple methods of selection and highlighting ofindividual aircraft or groups of aircraft. The user has
the option of superimposing these aircraft positionsover any number of background displays. Thesebackground options include ARTCC boundaries, any
stratum of en route sector boundaries, fixes, airways,
military and other special use airspace, airports, andgeopolitical boundaries. By using the TSD, acoordinator can monitor any number of trafficsituations or the entire systemwide traffic flows.TRAJECTORY − A EDST representation of the path
an aircraft is predicted to fly based upon a CurrentPlan or Trial Plan.
(See EN ROUTE DECISION SUPPORT TOOL.)
TRAJECTORY MODELING − The automated pro-
cess of calculating a trajectory.
TRAJECTORY OPTIONS SET (T OS)- A TOS is an
electronic message, submitted by the operator, that isused by the Collaborative Trajectory OptionsProgram (CTOP) to manage the airspace captured in
the traffic management program. The TOS will allow
the operator to express the route and delay trade-offoptions that they are willing to accept.
TRANSCRIBED WEATHER BROADCAST − A
continuous recording of meteorological and aeronau-
tical information that is broadcast on L/MF and VORfacilities for pilots. (Provided only in Alaska.)
(Refer to AIM.)
TRANSFER OF CONTROL − That action whereby
the responsibility for the separation of an aircraft istransferred from one controller to another.
(See ICAO term TRANSFER OF CONTROL.)
TRANSFER OF CONTROL [ICAO] − Transfer of
responsibility for providing air traf fic control service.
TRANSFERRING CONTROLLER − A controller/
facility transferring control of an aircraft to anothercontroller/facility.
(See ICAO term TRANSFERRING
UNIT/CONTROLLER.)
TRANSFERRING FACILITY −
(See TRANSFERRING CONTROLLER.)
TRANSFERRING U NIT/CONTROLLER [ICAO] −
Air traffic control unit/air traffic controller in theprocess of transferring the responsibility forproviding air traffic control service to an aircraft tothe next air traffic control unit/air traffic controlleralong the route of flight.
Note: See definition of accepting unit/controller.
TRANSITION −
a.The general term that describes the change from
one phase of flight or flight condition to another; e.g.,transition from en route flight to the approach ortransition from instrument flight to visual flight.
b.A published procedure (DP Transition) used to
connect the basic DP to one of several en routeairways/jet routes, or a published procedure (STAR5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG T−8Transition) used to connect one of several en route
airways/jet routes to the basic STAR.
(Refer to DP/STAR Charts.)
TRANSITION POINT − A point at an adapted
number of miles from the vertex at which an arrivalaircraft would normally commence descent from itsen route altitude. This is the first fix adapted on thearrival speed segments.
TRANSITION WAYPOINT − The waypoint that
defines the beginning of a runway or en routetransition on an RNA V SID or STAR.
TRANSITIONAL AIRSPACE − That portion of
controlled airspace wherein aircraft change from one
phase of flight or flight condition to another.
TRANSMISSOMETER − An apparatus used to
determine visibility by measuring the transmission of
light through the atmosphere. It is the measurementsource for determining runway visual range (RVR)and runway visibility value (RVV).
(See VISIBILITY.)
TRANSMITTING IN THE BLIND − A transmis-
sion from one station to other stations incircumstances where two-way communicationcannot be established, but where it is believed that the
called stations may be able to receive thetransmission.
TRANSPONDER − The airborne radar beacon
receiver/transmitter portion of the Air Traf fic Control
Radar Beacon System (ATCRBS) which automati-cally receives radio signals from interrogators on the
ground, and selectively replies with a specific replypulse or pulse group only to those interrogationsbeing received on the mode to which it is set torespond.
(See INTERROGATOR.)
(See ICAO term TRANSPONDER.)(Refer to AIM.)TRANSPONDER [ICAO] − A receiver/transmitter
which will generate a reply signal upon properinterrogation; the interrogation and reply being ondifferent frequencies.
TRANSPONDER CODES −
(See CODES.)
TRANSPONDER OBSERVED − Phraseology used
to inform a VFR pilot the aircraft ’s assigned beacon
code and position have been observed. Specifically,this term conveys to a VFR pilot the transponderreply has been observed and its position correlated for
transit through the designated area.
TRIAL PLAN − A proposed amendment which
utilizes automation to analyze and display potentialconflicts along the predicted trajectory of the selected
aircraft.
TRSA−
(See TERMINAL RADAR SERVICE AREA.)
TSD−
(See TRAFFIC SITUATION DISPLAY.)
TURBOJET AIRCRAFT − An aircraft having a jet
engine in which the energy of the jet operates aturbine which in turn operates the air compressor.
TURBOPROP AIRCRAFT − An aircraft having a jet
engine in which the energy of the jet operates aturbine which drives the propeller.
TURN ANTICIPATION − (maneuver anticipation).
TVOR−
(See TERMINAL-VERY HIGH FREQUENCY
OMNIDIRECTIONAL RANGE STATION.)
TWEB−
(See TRANSCRIBED WEATHER BROADCAST.)
TWO-WAY RADIO COMMUNICATIONS FAIL-
URE−
(See LOST COMMUNICATIONS.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG U−1U
UHF−
(See ULTRAHIGH FREQUENCY.)
ULTRAHIGH FREQUENCY − The frequency band
between 300 and 3,000 MHz. The bank of radiofrequencies used for military air/ground voicecommunications. In some instances this may go aslow as 225 MHz and still be referred to as UHF.
ULTRALIGHT VEHICLE − A single-occupant
aeronautical vehicle operated for sport or recreational
purposes which does not require FAA registration, an
airworthiness certificate, nor pilot certification.Operation of an ultralight vehicle in certain airspacerequires authorization from ATC
(Refer to 14 CFR Part 103.)
UNABLE − Indicates inability to comply with a
specific instruction, request, or clearance.
UNASSOCIATED − A radar target that does not
display a data block with flight identification andaltitude information.
(See ASSOCIATED.)
UNDER THE HOOD − Indicates that the pilot is
using a hood to restrict visibility outside the cockpitwhile simulating instrument flight. An appropriately
rated pilot is required in the other control seat whilethis operation is being conducted.
(Refer to 14 CFR Part 91.)
UNFROZEN − The Scheduled Time of Arrival (STA)
tags, which are still being rescheduled by the time
based flow management (TBFM) calculations. The
aircraft will remain unfrozen until the time thecorresponding estimated time of arrival (ETA) tagpasses the preset freeze horizon for that aircraft’sstream class. At this point the automatic rescheduling
will stop, and the STA becomes “frozen.”
UNICOM − A nongovernment communication facil-
ity which may provide airport information at certainairports. Locations and frequencies of UNICOMs are
shown on aeronautical charts and publications.
(See CHART SUPPLEMENT U.S.)
(Refer to AIM.)UNMANNED AIRCRAFT (UA) - A device used or
intended to be used for flight that has no onboardpilot. This device can be any type of airplane,helicopter, airship, or powered-lift aircraft.Unmanned free balloons, moored balloons, tetheredaircraft, gliders, and unmanned rockets are notconsidered to be a UA.
UNMANNED AIRCRAFT SYSTEM (UAS)- An
unmanned aircraft and its associated elements related
to safe operations, which may include controlstations (ground, ship, or air based), control links,support equipment, payloads, flight terminationsystems, and launch/recovery equipment. It consists
of three elements: unmanned aircraft, control station,and data link.
UNPUBLISHED ROUTE − A route for which no
minimum altitude is published or charted for pilotuse. It may include a direct route between NA V AIDs,
a radial, a radar vector, or a final approach coursebeyond the segments of an instrument approachprocedure.
(See PUBLISHED ROUTE.)
(See ROUTE.)
UNRELIABLE (GPS/WAAS) − An advisory to
pilots indicating the expected level of service of theGPS and/or W AAS may not be available. Pilots must
then determine the adequacy of the signal for desired
use.
UPWIND LEG −
(See TRAFFIC PATTERN.)
URGENCY − A condition of being concerned about
safety and of requiring timely but not immediateassistance; a potential distress condition.
(See ICAO term URGENCY.)
URGENCY [ICAO] − A condition concerning the
safety of an aircraft or other vehicle, or of person onboard or in sight, but which does not requireimmediate assistance.
USAFIB−
(See ARMY AVIATION FLIGHT INFORMATION
BULLETIN.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary12/10/15
PCG V−1V
VASI−
(See VISUAL APPROACH SLOPE INDICATOR.)
VCOA−
(See VISUAL CLIMB OVER AIRPORT.)
VDP−
(See VISUAL DESCENT POINT.)
VECTOR − A heading issued to an aircraft to provide
navigational guidance by radar.
(See ICAO term RADAR VECTORING.)
VERIFY − Request confirmation of information;
e.g., “verify assigned altitude.”
VERIFY SPECIFIC DIRECTION OF TAKEOFF
(OR TURNS AFTER TAKEOFF) − Used by ATC to
ascertain an aircraft’s direction of takeoff and/ordirection of turn after takeoff. It is normally used for
IFR departures from an airport not having a controltower. When direct communication with the pilot isnot possible, the request and information may berelayed through an FSS, dispatcher, or by other
means.
(See IFR TAKEOFF MINIMUMS AND
DEPARTURE PROCEDURES.)
VERTEX − The last fix adapted on the arrival speed
segments. Normally, it will be the outer marker of the
runway in use. However, it may be the actualthreshold or other suitable common point on theapproach path for the particular runway configura-tion.
VERTEX TIME OF ARRIV AL − A calculated time of
aircraft arrival over the adapted vertex for the runway
configuration in use. The time is calculated via theoptimum flight path using adapted speed segments.
VERTICAL NA VIGATION (VNA V)– A function of
area navigation (RNA V) equipment which calculates,
displays, and provides vertical guidance to a profileor path.
VERTICAL SEPARATION − Separation between
aircraft expressed in units of vertical distance.
(See SEPARATION.)
VERTICAL TAKEOFF AND LANDING AIR-CRAFT− Aircraft capable of vertical climbs and/ordescents and of using very short runways or small
areas for takeoff and landings. These aircraft include,
but are not limited to, helicopters.
(See SHORT TAKEOFF AND LANDING
AIRCRAFT.)
VERY HIGH FREQUENCY − The frequency band
between 30 and 300 MHz. Portions of this band, 108
to 118 MHz, are used for certain NA V AIDs; 118 to136 MHz are used for civil air/ground voicecommunications. Other frequencies in this band areused for purposes not related to air traffic control.
VERY HIGH FREQUENCY OMNIDIRECTION-
AL RANGE STA TION−
(See VOR.)
VERY LOW FREQUENCY − The frequency band
between 3 and 30 kHz.
VFR−
(See VISUAL FLIGHT RULES.)
VFR AIRCRAFT − An aircraft conducting flight in
accordance with visual flight rules.
(See VISUAL FLIGHT RULES.)
VFR CONDITIONS − Weather conditions equal to
or better than the minimum for flight under visualflight rules. The term may be used as an ATCclearance/instruction only when:
a.An IFR aircraft requests a climb/descent in
VFR conditions.
b.The clearance will result in noise abatement
benefits where part of the IFR departure route doesnot conform to an FAA approved noise abatementroute or altitude.
c.A pilot has requested a practice instrument
approach and is not on an IFR flight plan.
Note: All pilots receiving this authorization must
comply with the VFR visibility and distance fromcloud criteria in 14 CFR Part 91. Use of the termdoes not relieve controllers of their responsibility to
separate aircraft in Class B and Class C airspace
or TRSAs as required by F AAO JO 71 10.65. When
used as an ATC clearance/instruction, the termmay be abbreviated “VFR;” e.g., “MAINTAINVFR,” “CLIMB/DESCEND VFR,” etc.
VFR FLIGHT −
(See VFR AIRCRAFT.)
Pilot/Controller Glossary 12/10/15
PCG V−2VFR MILITARY TRAINING ROUTES − Routes
used by the Department of Defense and associatedReserve and Air Guard units for the purpose ofconducting low-altitude navigation and tacticaltraining under VFR below 10,000 feet MSL atairspeeds in excess of 250 knots IAS.
VFR NOT RECOMMENDED − An advisory
provided by a flight service station to a pilot duringa preflight or inflight weather briefing that flightunder visual flight rules is not recommended. To begiven when the current and/or forecast weatherconditions are at or below VFR minimums. It doesnot abrogate the pilot’s authority to make his/her owndecision.
VFR-ON-TOP − ATC authorization for an IFR
aircraft to operate in VFR conditions at anyappropriate VFR altitude (as specified in 14 CFR and
as restricted by ATC). A pilot receiving thisauthorization must comply with the VFR visibility,distance from cloud criteria, and the minimum IFRaltitudes specified in 14 CFR Part 91. The use of this
term does not relieve controllers of their responsibil-ity to separate aircraft in Class B and Class C airspace
or TRSAs as required by FAAO JO 7110.65.
VFR TERMINAL AREA CHARTS −
(See AERONAUTICAL CHART.)
VFR WA YPOINT−
(See WAYPOINT.)
VHF−
(See VERY HIGH FREQUENCY.)
VHF OMNIDIRECTIONAL RANGE/TACTICAL
AIR NA VIGA TION−
(See VORTAC.)
VIDEO MAP − An electronically displayed map on
the radar display that may depict data such as airports,heliports, runway centerline extensions, hospitalemergency landing areas, NA V AIDs and fixes,reporting points, airway/route centerlines, bound-aries, handoff points, special use tracks, obstructions,
prominent geographic features, map alignmentindicators, range accuracy marks, minimum vector-ing altitudes.
VISIBILITY − The ability, as determined by
atmospheric conditions and expressed in units ofdistance, to see and identify prominent unlighted
objects by day and prominent lighted objects bynight. V isibility is reported as statute miles, hundreds
of feet or meters.
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
a.Flight Visibility− The average forward horizon-
tal distance, from the cockpit of an aircraft in flight,at which prominent unlighted objects may be seenand identified by day and prominent lighted objectsmay be seen and identified by night.
b.Ground Visibility − Prevailing horizontal visi-
bility near the earth’s surface as reported by theUnited States National Weather Service or anaccredited observer.
c.Prevailing Visibility − The greatest horizontal
visibility equaled or exceeded throughout at least half
the horizon circle which need not necessarily becontinuous.
d.Runway Visibility V alue (RVV) − The visibility
determined for a particular runway by a transmis-someter. A meter provides a continuous indication of
the visibility (reported in miles or fractions of miles)for the runway. RVV is used in lieu of prevailingvisibility in determining minimums for a particularrunway.
e.Runway Visual Range (RVR) − An instrumen-
tally derived value, based on standard calibrations,that represents the horizontal distance a pilot will see
down the runway from the approach end. It is basedon the sighting of either high intensity runway lightsor on the visual contrast of other targets whicheveryields the greater visual range. RVR, in contrast toprevailing or runway visibility, is based on what apilot in a moving aircraft should see looking down the
runway. RVR is horizontal visual range, not slantvisual range. It is based on the measurement of atransmissometer made near the touchdown point ofthe instrument runway and is reported in hundreds offeet. RVR is used in lieu of RVV and/or prevailingvisibility in determining minimums for a particularrunway.
1.Touchdown RVR
− The RVR visibility
readout values obtained from RVR equipmentserving the runway touchdown zone.
2.Mid-RVR
− The RVR readout values obtained
from RVR equipment located midfield of the runway.
Pilot/Controller Glossary12/10/15
PCG V−33.Rollout RVR − The RVR readout values
obtained from RVR equipment located nearest therollout end of the runway.
(See ICAO term FLIGHT VISIBILITY.)
(See ICAO term GROUND VISIBILITY.)
(See ICAO term RUNWAY VISUAL RANGE.)
(See ICAO term VISIBILITY.)
VISIBILITY [ICAO]− The ability, as determined by
atmospheric conditions and expressed in units ofdistance, to see and identify prominent unlightedobjects by day and prominent lighted objects bynight.
a.Flight Visibility −The visibility forward from
the cockpit of an aircraft in flight.
b.Ground Visibility −The visibility at an aero-
drome as reported by an accredited observer.
c.Runway Visual Range [RVR] −The range over
which the pilot of an aircraft on the centerline of arunway can see the runway surface markings or thelights delineating the runway or identifying itscenterline.
VISUAL APPROACH − An approach conducted on
an instrument flight rules (IFR) flight plan whichauthorizes the pilot to proceed visually and clear ofclouds to the airport. The pilot must, at all times, have
either the airport or the preceding aircraft in sight.This approach must be authorized and under thecontrol of the appropriate air traffic control facility.Reported weather at the airport must be ceiling at orabove 1,000 feet and visibility of 3 miles or greater.
(See ICAO term VISUAL APPROACH.)
VISUAL APPROACH [ICAO] − An approach by an
IFR flight when either part or all of an instrumentapproach procedure is not completed and theapproach is executed in visual reference to terrain.
VISUAL APPROACH SLOPE INDICATOR −
(See AIRPORT LIGHTING.)
VISUAL CLIMB OVER AIRPORT (VCOA) − A
departure option for an IFR aircraft, operating invisual meteorological conditions equal to or greaterthan the specified visibility and ceiling, to visuallyconduct climbing turns over the airport to thepublished “climb−to” altitude from which to proceed
with the instrument portion of the departure. VCOAprocedures are developed to avoid obstacles greaterthan 3 statute miles from the departure end of therunway as an alternative to complying with climb
gradients greater than 200 feet per nautical mile.Pilots are responsible to advise ATC as early as
possible of the intent to fly the VCOA option prior to
departure. These textual procedures are published in
the ‘Take−Off Minimums and (Obstacle) Departure
Procedures’ section of the Terminal ProceduresPublications and/or appear as an option on a Graphic
ODP.
(See AIM.)
VISUAL DESCENT POINT − A defined point on the
final approach course of a nonprecision straight-inapproach procedure from which normal descent from
the MDA to the runway touchdown point may becommenced, provided the approach threshold of that
runway, or approach lights, or other markingsidentifiable with the approach end of that runway are
clearly visible to the pilot.
VISUAL FLIGHT RULES − Rules that govern the
procedures for conducting flight under visual
conditions. The term “VFR” is also used in theUnited States to indicate weather conditions that areequal to or greater than minimum VFR requirements.
In addition, it is used by pilots and controllers toindicate type of flight plan.
(See INSTRUMENT FLIGHT RULES.)
(See INSTRUMENT METEOROLOGICAL
CONDITIONS.)
(See VISUAL METEOROLOGICAL
CONDITIONS.)
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
VISUAL HOLDING − The holding of aircraft at
selected, prominent geographical fixes which can be
easily recognized from the air.
(See HOLDING FIX.)
VISUAL METEOROLOGICAL CONDITIONS −
Meteorological conditions expressed in terms ofvisibility, distance from cloud, and ceiling equal to or
better than specified minima.
(See INSTRUMENT FLIGHT RULES.)
(See INSTRUMENT METEOROLOGICAL
CONDITIONS.)
(See VISUAL FLIGHT RULES.)
VISUAL SEGMENT −
(See PUBLISHED INSTRUMENT APPROACH
PROCEDURE VISUAL SEGMENT.)
Pilot/Controller Glossary 12/10/15
PCG V−4VISUAL SEPARATION − A means employed by
ATC to separate aircraft in terminal areas and en routeairspace in the NAS. There are two ways to ef fect this
separation:
a.The tower controller sees the aircraft involved
and issues instructions, as necessary, to ensure thatthe aircraft avoid each other.
b.A pilot sees the other aircraft involved and upon
instructions from the controller provides his/her own
separation by maneuvering his/her aircraft asnecessary to avoid it. This may involve followinganother aircraft or keeping it in sight until it is nolonger a factor.
(See SEE AND AVOID.)
(Refer to 14 CFR Part 91.)
VLF−
(See VERY LOW FREQUENCY.)
VMC−
(See VISUAL METEOROLOGICAL
CONDITIONS.)
VOICE SWIT CHING AND CONTROL SYSTEM −
The VSCS is a computer controlled switching systemthat provides air traffic controllers with all voicecircuits (air to ground and ground to ground)necessary for air traffic control.
(See VOICE SWITCHING AND CONTROL
SYSTEM.)
(Refer to AIM.)
VOR− A ground-based electronic navigation aid
transmitting very high frequency navigation signals,360 degrees in azimuth, oriented from magneticnorth. Used as the basis for navigation in the National
Airspace System. The VOR periodically identifiesitself by Morse Code and may have an additionalvoice identification feature. V oice features may beused by ATC or FSS for transmitting instructions/information to pilots.
(See NAVIGATIONAL AID.)
(Refer to AIM.)
VOR TEST SIGNAL −
(See VOT.)VORTAC − A navigation aid providing VOR
azimuth, TACAN azimuth, and TACAN distancemeasuring equipment (DME) at one site.
(See DISTANCE MEASURING EQUIPMENT.)
(See NAVIGATIONAL AID.)(See TACAN.)(See VOR.)(Refer to AIM.)
VORTICES − Circular patterns of air created by the
movement of an airfoil through the air whengenerating lift. As an airfoil moves through theatmosphere in sustained flight, an area of area of low
pressure is created above it. The air flowing from thehigh pressure area to the low pressure area around and
about the tips of the airfoil tends to roll up into tworapidly rotating vortices, cylindrical in shape. Thesevortices are the most predominant parts of aircraftwake turbulence and their rotational force isdependent upon the wing loading, gross weight, andspeed of the generating aircraft. The vortices frommedium to super aircraft can be of extremely highvelocity and hazardous to smaller aircraft.
(See AIRCRAFT CLASSES.)
(See WAKE TURBULENCE.)
(Refer to AIM.)
VOT− A ground facility which emits a test signal to
check VOR receiver accuracy. Some VOTs areavailable to the user while airborne, and others arelimited to ground use only.
(See CHART SUPPLEMENT U.S.)
(Refer to 14 CFR Part 91.)
(Refer to AIM.)
VR−
(See VFR MILITARY TRAINING ROUTES.)
VSCS−
(See VOICE SWITCHING AND CONTROL
SYSTEM.)
VTA−
(See VERTEX TIME OF ARRIVAL.)
VTOL AIRCRAFT −
(See VERTICAL TAKEOFF AND LANDING
AIRCRAFT.)Pilot/Controller Glossary 5/26/16
Pilot/Controller Glossary12/10/15
PCG W−1W
WA−
(See AIRMET.)
(See WEATHER ADVISORY.)
WAAS−
(See WIDE-AREA AUGMENTATION SYSTEM.)
WAKE TURBULENCE − Phenomena resulting from
the passage of an aircraft through the atmosphere.The term includes vortices, thrust stream turbulence,jet blast, jet wash, propeller wash, and rotor washboth on the ground and in the air.
(See AIRCRAFT CLASSES.)
(See JET BLAST.)
(See VORTICES.)
(Refer to AIM.)
WARNING AREA −
(See SPECIAL USE AIRSPACE.)
WAYPOINT − A predetermined geographical posi-
tion used for route/instrument approach definition,progress reports, published VFR routes, visualreporting points or points for transitioning and/orcircumnavigating controlled and/or special useairspace, that is defined relative to a VORTAC station
or in terms of latitude/longitude coordinates.
WEATHER ADVISORY − In aviation weather
forecast practice, an expression of hazardous weather
conditions not predicted in the area forecast, as theyaffect the operation of air traffic and as prepared bythe NWS.
(See AIRMET.)
(See SIGMET.)
WHEN ABLE −
a.In conjunction with ATC instructions, gives the
pilot the latitude to delay compliance until acondition or event has been reconciled. Unlike “pilot
discretion,” when instructions are prefaced “whenable,” the pilot is expected to seek the firstopportunity to comply.
b.In conjunction with a weather deviation
clearance, requires the pilot to determine when he/she
is clear of weather, then execute ATC instructions.
c.Once a maneuver has been initiated, the pilot is
expected to continue until the specifications of theinstructions have been met. “When able,” should not
be used when expeditious compliance is required.
WIDE-AREA AUGMENTATION SYSTEM
(WAAS)− The W AAS is a satellite navigation system
consisting of the equipment and software whichaugments the GPS Standard Positioning Service(SPS). The WAAS provides enhanced integrity,accuracy, availability, and continuity over and above
GPS SPS. The differential correction functionprovides improved accuracy required for precisionapproach.
WIDE AREA MULTILATERATION (WAM)– A
distributed surveillance technology which may
utilize any combination of signals from Air Traffic
Control Radar Beacon System (ATCRBS) (Modes A
and C) and Mode S transponders, and ADS-B
transmissions. Multiple geographically dispersed
ground sensors measure the time-of-arrival of the
transponder messages. Aircraft position is determ-
ined by joint processing of the time-
difference-of-arrival (TDOA) measurements com-
puted between a reference and the ground stations
measured time-of-arrival.
WILCO− I have received your message, understand
it, and will comply with it.
WIND GRID DISPLAY − A display that presents the
latest forecasted wind data overlaid on a map of theARTCC area. Wind data is automatically entered and
updated periodically by transmissions from theNational Weather Service. Winds at specificaltitudes, along with temperatures and air pressurecan be viewed.
WIND SHEAR− A change in wind speed and/or wind
direction in a short distance resulting in a tearing orshearing ef fect. It can exist in a horizontal or vertical
direction and occasionally in both.
WIND SHEAR ESCAPE– An unplanned abortive
maneuver initiated by the pilot in command (PIC) as
a result of onboard cockpit systems. Wind shearescapes are characterized by maximum thrust climbs
in the low altitude terminal environment until windshear conditions are no longer detected.
WING TIP VORTICES −
(See VORTICES.)5/26/16 Pilot/Controller Glossary
Pilot/Controller Glossary 12/10/15
PCG W−2WORDS TWICE −
a.As a request: “Communication is difficult.
Please say every phrase twice.”
b.As information: “Since communications are
difficult, every phrase in this message will be spoken
twice.”WS−
(See SIGMET.)
(See WEATHER ADVISORY.)
WST−
(See CONVECTIVE SIGMET.)
(See WEATHER ADVISORY.)Pilot/Controller Glossary 5/26/16
05/26/16 JO 7110.65W CHG 1
Index I−1INDEX
[References are to page numbers]
A
ABANDONED APPROACH, 7 −6−2
Abbreviated Departure Clearance, 4 −3−4
Abbreviated Transmissions, 2 −4−2
Abbreviations, 1 −2−3
ACKNOWLEDGEMENT OF AUTOMA TED
NOTIFICATION, 13−1−5
ACL, 13−1−1
Additional Separation for Formation Flights, 5 −5−6
ADJACENT AIRPORT OPERATION, 6 −1−1
ADJACENT AIRPORT OPERATIONS, 7 −8−2
Adjacent Airspace, 5 −5−7
Adjusted Minimum Flight Level, 4 −5−2
Advance Descent Clearance, 4 −7−1
Aerial Refueling, 9 −2−6
Air Defense Exercise Beacon Code Assignment, 5 −2−4
Air Traffic Service (ATS) Routes, 2 −5−1
Air Traffic Services Interfacility Data Communications
(AIDC), 8 −2−1
Airborne Military Flights, 2 −2−4
Aircraft Bomb Threats, 10 −2−4
Aircraft Carrying Dangerous Materials, 9 −2−1
Aircraft Equipment Suffix (Strips), 2 −3−10
Aircraft Identification, 2 −4−8
Aircraft Identity (Strips), 2 −3−9
Aircraft Orientation, 10 −2−1
Aircraft Type (Strips), 2 −3−10
Aircraft T ypes, 2−4−11
Airport Conditions, 3 −3−1, 4−7−5
Airport Ground Emergency, 10 −1−2
Airport Lighting, 3 −4−1
Airport Surface Detection Procedures, 3 −6−1
Radar−Only Mode, 3 −6−2
Airport Traffic Control − Terminal, 3 −1−1
Airspace Classes, 2 −4−11
AIRSPACE CLASSIFICA TION, 12 −1−1
AIT, 5−4−5ALERTING SERVICE AND SPECIAL ASSISTANCE,
10−6−1
Alignment Accuracy Check (Radar), 5 −1−1
ALNOT, 10 −3−2
ALNOT Cancellation, 10 −3−3
ALS Intensity Settings, 3 −4−2
ALSF−2/SSALR, 3 −4−3
Alternative Routes, 4 −4−3
Altimeter Setting (Oceanic), 8 −1−1
ALTIMETER SETTING ISSUANCE BELOW
LOWEST USABLE FL, 2 −7−1
Altimeter Settings, 2 −7−1
Altitude Amendments, 4 −2−1
Altitude and Distance Limitations, 4 −1−1
ALTITUDE ASSIGNMENT, 7 −5−2
Altitude Assignment and Verification, 4 −5−1
Altitude Assignment for Military High Altitude
Instrument Approaches, 4 −8−6
ALTITUDE ASSIGNMENTS, 7 −7−1
ALTITUDE CHANGE FOR IMPROVED
RECEPTION, 10 −2−1
Altitude Confirmation − Mode C, 5 −2−7
Altitude Confirmation − Non−Mode C, 5 −2−7
Altitude Confirmation − Nonradar, 4 −5−8
Altitude Filters (Beacon), 5 −2−9
Altitude for Direction of Flight (IFR), 4 −5−1
Altitude for Direction of Flight (OTP), 7 −3−2
ALTITUDE INFORMATION, 5 −11−1
Altitude Instructions, 4 −5−3
Altitude Restricted Low Approach, 3 −10−8
ALTITUDE/FLIGHT LEVEL TRANSITION, 8 −5−1
ALTRV Clearance, 4 −2−3
ALTRV Information, 2 −2−2
Annotations, 1 −2−3
Anticipated Altitude Changes, 4 −5−8
Anticipating Separation (ATCT − Arrival), 3 −10−7
Anticipating Separation (ATCT − Departure), 3 −9−4
05/26/16 JO 7110.65W CHG 1
Index I−2[References are to page numbers]
Approach Clearance Information, 4 −8−8
Approach Clearance Procedures, 4 −8−1
Approach Control Service for VFR Arriving Aircraft,
7−1−1
APPROACH GUIDANCE TERMINATION, 5 −11−2,
5−12−2
APPROACH INFORMA TION, 5−10−1
Approach Information (Arrivals), 4 −7−4
APPROACH INTERV AL, 7−7−1
Approach Lights, 3 −4−2
Approach Separation Responsibility, 5 −9−4
APPROACH SEQUENCE, 6 −7−1
Approaches to Multiple Runways (Visual), 7 −4−2
Arctic CTA, 8 −10−1
Arresting System Operations, 3 −3−3
Arrival Information, 4 −7−3
Arrival Information by Approach Control Facilities,
4−7−5
Arrival Instructions (Radar), 5 −9−2
ARRIVAL MINIMA, 6 −1−1
Arrival Procedures, 4 −7−1
Arrival Procedures and Separation (ATCT), 3 −10−1
ARRIVAL SEP ARATION, 3 −12−1
ARRIVAL/DEPARTURE RUNWAY VISIBILITY,
2−8−1
Arrivals on Parallel or Nonintersecting Diverging
Runways (Radar), 5 −8−3
ARTS, 5−15−1
ATC Assigned Airspace, 9 −3−1
ATC Service, 2 −1−1
ATIS Application, 2 −9−1
ATIS Content, 2 −9−2
ATIS Procedures, 2 −9−1
Authorized Interruptions, 2 −4−1
Authorized Relays, 2 −4−2
Authorized Transmissions, 2 −4−1
Automated Information Transfer, 5 −4−5
Automated Radar Terminal Systems − Terminal,
5−15−1
Automatic Altitude Reporting, 5 −2−8Automation − En Route, 5 −14−1
Avoidance of Areas of Nuclear Radiation, 9 −2−8
AWACS Special Flights, 9 −2−9
B
Balloons, Unmanned Free, 9 −6−1
Beacon Code for Pressure Suit Flights and Flights
Above FL 600, 5 −2−4
Beacon Code Monitor, 5 −2−5
Beacon Identification Methods, 5 −3−1
Beacon Range Accuracy, 5 −1−2
Beacon Systems, 5 −2−1
Beacon Target Displacement, 5 −5−8
Beacon Termination, 5 −2−8
Below Minima Report by Pilot, 4 −7−4
BIRD ACTIVITY INFORMA TION, 2−1−11
BLUE LIGHTNING EVENTS, 2 −1−13
Braking Action, 3 −3−2
Braking Action Advisories, 3 −3−2
C
Calm Wind Conditions, 2 −6−5
Canadian Airspace Procedures, 12 −1−1
CANCELLATION OF IFR FLIGHT PLAN, 4 −2−4
Cancellation of Takeoff Clearance, 3 −9−12
Caribbean ICAO Region, 8 −8−1
Celestial Navigation Training, 9 −2−1
Charted Visual Flight Procedures, 7 −4−3
Circling Approach, 4 −8−7
CLASS A AIRSPACE, 9 −7−1
Class A Airspace Restrictions, 7 −1−1
CLASS B AIRSP ACE, 9−7−1
Class B Separation, 7 −9−2
Class B Service Area (Terminal), 7 −9−1
CLASS C AIRSP ACE, 9−7−1
Class C Separation, 7 −8−1
Class C Service (Terminal), 7 −8−1
CLASS C SER VICES, 7 −8−1
05/26/16 JO 7110.65W CHG 1
Index I−3[References are to page numbers]
CLASS D AIRSPACE, 9 −7−1
Clearance Beyond Fix, 4 −6−2
Clearance Delivery Instructions, 4 −2−1
Clearance for Visual Approach, 7 −4−1
Clearance Information (Arrivals), 4 −7−1
Clearance Items, 4 −2−1
Clearance Items (Airfile), 4 −2−3
Clearance Limit, 4 −8−6
Clearance Prefix, 4 −2−1
Clearance Relay, 4 −2−1
Clearance Status (Strips), 2 −3−10
Clearance to Holding Fix, 4 −6−1
Clearance Void Times, 4 −3−6
Clearances, 4 −2−1
CLIMB TO VFR, 7 −5−3
Closed Runway Information, 3 −3−1
Closed Traffic, 3 −10−9
Coast Tracks, 5 −14−3
COMMUNICATION TRANSFER, 5 −12−2
COMMUNICATIONS CHECK, 5 −10−4
Communications Failure, 10 −4−1
Communications Release (Approaches), 4 −8−7
COMPOSITE SEPARATION ALTITUDE
ASSIGNMENT, 8 −9−3
COMPOSITE SEPARATION APPLICA TION, 8−9−3
Composite Separation Minima (Oceanic), 8 −9−3
Computer Entry of Assigned Altitude, 5 −14−2
Computer Message Verification, 2 −2−2
Conflict Alert (Host), 5 −14−1
Conflict Alert/Mode C Intruder (MCI) (ARTS), 5 −15−2
CONFLICT DETECTION AND RESOLUTION,
13−1−1, 13−2−1
Constraints Governing Supplements and Procedural
Deviations, 1 −1−2
Contact Approach, 7 −4−4
Control Estimates, 8 −1−1
Control Symbology (Strip), 2 −3−12
CONTROL TRANSFER, 2 −1−7, 7−6−2
Controller Initiated Coast Tracks, 5−14−3Controller Pilot Data Link Communications (CPDLC),
2−4−4, 4−5−4, 13−2−3
Coordinate Use of Airspace, 2 −1−6
Coordination Between Local and Ground Controllers,
3−1−2
Coordination with Receiving Facility (Departures),
4−3−8
Course Definitions, 1 −2−2
COURSE DIVERGENCE, 8 −5−1
CPDLC, 13 −2−3
Crossing Altitude, 4 −1−2
CURRENCY OF TRAJECTORY INFORMATION,
13−1−5
CURRENT SETTINGS, 2 −7−1
CVFP , 7−4−3
D
DECISION HEIGHT, 5 −12−1
DECISION HEIGHT (DH) NOTIFICATION, 5 −12−1
Decision Support T ools, 13−1−1
Degree − Distance Route Definition for Military
Operations, 4 −4−3
Delay Sequencing (Departures), 4 −3−8
Department of Energy Special Flights, 9 −2−1
Departure and Arrival (Radar Separation), 5 −8−3
DEPARTURE CLEARANCE/COMMUNICATION
FAILURE, 12 −1−2
Departure Clearances, 4 −3−1
Departure Control Instructions (ATCT), 3 −9−2
Departure Delay Information (ATCT), 3 −9−1
Departure Information (ATCT), 3 −9−1
Departure Procedures, 4 −3−1
Departure Procedures and Separation (ATCT), 3 −9−1
Departure Restrictions, 4 −3−6
DEPARTURE SEP ARATION, 3 −12−1
Departure Terminology, 4 −3−1
Departures on Parallel or Nonintersecting Diverging
Runways (Radar), 5 −8−3
DERELICT BALLOONS, 9 −6−2
05/26/16 JO 7110.65W CHG 1
Index I−4[References are to page numbers]
DESCENT INSTRUCTION, 5 −12−1
DESCENT INSTRUCTIONS, 5 −11−1
DESCENT NOTIFICATION, 5 −11−1
Deviation Advisories (Protected Airspace), 5 −1−4
DIRECT CLEARANCES, 4 −4−4
Discrete Environment (Beacon), 5 −2−1
Disseminating Weather Information, 2 −6−6
DISTANCE FROM TOUCHDOWN, 5 −12−1
DL, 13−1−1
DME ARC MINIMA, 6 −5−2
DOE, 9−2−1
DUPLICATE POSITION REPORTS, 6 −1−1
Duty Priority, 2 −1−1
E
E−MSAW, 5 −14−1
Edge of Scope, 5 −5−7
Electronic Attack (EA) Activity, 5 −1−2
Electronic Cursor, 5 −1−3
ELEVATION FAILURE, 5 −12−2
ELP Operations, 3 −10−10
ELT, 10−2−3
Emergencies, 10 −1−1
Emergencies Involving Military Fighter −Type Aircraft,
10−1−2
Emergency Airport Recommendation, 10 −2−6
Emergency Assistance, 10 −2−1
Emergency Code Assignment, 5 −2−3
Emergency Control Actions, 10 −4−1
EMERGENCY DETERMINATIONS, 10 −1−1
Emergency Landing Pattern (ELP) Operations, 3 −10−10
Emergency Lighting, 3 −4−1
Emergency Locator Transmitter Signals, 10 −2−3
Emergency Obstruction Video Map, 10 −2−6
Emergency Procedures (Oceanic), 10 −6−1
Emergency Situations, 10 −2−1
Emphasis for Clarity, 2 −4−4
En Route Data Entries (Strips), 2 −3−3En Route Fourth Line Data Block Usage, 5 −4−5
En Route Minimum Safe Altitude Warning, 5 −14−1
En Route Sector Team Responsibilities, 2 −10−1
Entry of Reported Altitude, 5 −14−2
EOVM, 10 −2−6
Equipment on Runways, 3 −1−2
EQUIPMENT USAGE, 3 −6−1
ERAM COMPUTER ENTRY OF HOLD
INFORMATION, 5 −14−3
ERAM Decision Support Tools (EDST), 13 −1−1
Establishing Two −Way Communications (Class D),
3−1−6
ESTABLISHING TWO-WAY COMMUNICATIONS,
7−8−1
Evasive Action Maneuvers, 9 −2−9
EXCEPTIONS, 4 −1−1
Expeditious Compliance, 2 −1−3
Experimental Aircraft Operations, 9 −2−2
Explosive Car go, 10−5−1
Explosive Detection K −9 Teams, 10 −2−5
EXTENDED NOTIFICA TION, 10 −7−1
F
FAA Research and Development Flights, 9 −2−2
Facility Identification, 2 −4−8
Failed Transponder in Class A Airspace, 5 −2−6
Failure to Display Assigned Beacon Code, 5 −2−5
False or Deceptive Communications, 2 −4−2
Far Field Monitor (FFM) Remote Status Unit, 3 −3−4
FINAL APPROACH ABNORMALITIES, 5 −10−5
Final Approach Course Interception, 5 −9−1
FINAL APPROACH GUIDANCE, 5 −11−1
Final Approach Obstacle Clearance Surfaces (OCS),
3−7−5
FINAL CONTROLLER CHANGEOVER, 5 −10−3
Fix Use, 4 −1−2
Flight Check Aircraft, 9 −1−1
Flight Direction Exceptions, 4 −5−1
05/26/16 JO 7110.65W CHG 1
Index I−5[References are to page numbers]
Flight Plans and Control Information, 2 −2−1
Flight Progress Strips, 2 −3−1
FLIGHT VISIBILITY BELOW ONE MILE, 7 −5−4
FLYNET, 9 −2−2
FORECAST WINDS, 13 −1−6
Formation Flight Additional Separation, 5 −5−6
Formation Flights, 2 −1−6
Forward Departure Delay Information, 4 −3−8
Forwarding Amended and UTM Data, 2 −2−3
Forwarding Approach Information by Nonapproach
Control Facilities, 3 −10−1
Forwarding Departure T imes, 4−3−8
Forwarding Flight Plan Data Between U.S. ARTCCs
and Canadian ACCs, 2 −2−4
Forwarding Information, 2 −2−1
Forwarding VFR Data, 2 −2−1
Fuel Dumping, 9 −4−1
Function Code Assignments, 5 −2−2
FUNCTIONAL USE, 5 −15−1
FURNISH RVR/RVV VALUES, 2 −8−1
G
General Control, 2 −1−1
GLIDEPATH AND COURSE INFORMA TION, 5−12−1
GLIDEPATH NOTIFICATION, 5 −12−1
GPD, 13−1−6
Ground Missile Emergencies, 10 −7−1
Ground Operations, 3 −7−4
GROUND OPERATIONS RELATED TO
THREE/FOUR −HOUR TARMAC RULE, 3 −1−6
Ground Operations When Volcanic Ash is Present,
3−1−6
Ground Stop, 4 −3−8
Ground Traffic Movement, 3 −7−1
GROUND VISIBILITY BELOW ONE MILE, 7 −5−3
GUIDANCE TO EMERGENCY AIRPORT, 10 −2−6
H
Helicopter Arrival Separation, 3 −11−3Helicopter Departure Separation, 3 −11−2
Helicopter Landing Clearance, 3 −11−4
Helicopter Operations, 3 −11−1
Helicopter Takeoff Clearance, 3 −11−1
HELICOPTER TRAFFIC, 7 −7−1, 7−9−2
High Intensity Runway Lights, 3 −4−4
High Speed Turnoff Lights, 3 −4−5
Hijacked Aircraft, 10 −2−2
HIRL, 3−4−4
HIRL Associated with MALSR, 3 −4−4
HIRL Changes Affecting RVR, 3−4−4
HIWAS, 2 −6−1
Hold for Release, 4 −3−6
HOLDING, 13 −1−2
Holding Aircraft, 4 −6−1
Holding Delays, 4 −6−2
Holding Flight Path Deviation, 4 −6−3
Holding Instructions, 4 −6−3
Holding Pattern Surveillance, 5 −1−4
Holding Points (Visual), 4 −6−3
I
ICAO Phonetics, 2 −4−5
IDENTIFICA TION, 3−6−1
IFR, 4−1−1
IFR − VFR Flights, 4 −2−3
IFR AND SVFR MINIMA, 10 −7−1
IFR Flight Progress Data, 2 −2−1
IFR to VFR Flight Plan Change, 2 −2−1
ILS Protection/Critical Areas (Holding), 4 −6−3
INFLIGHT CONTINGENCIES, 10 −6−2
Inflight Deviations from Transponder/Mode C
Requirements Between 10,000 Feet and 18,000Feet, 5−2−8
Inflight Equipment Malfunctions, 2 −1−4
INFORMATION DISPLA YED, 5−15−1
05/26/16 JO 7110.65W CHG 1
Index I−6[References are to page numbers]
INFORMATION USAGE, 3 −6−1
Inhibiting Minimum Safe Altitude Warning (ARTS),
5−15−2
Initial Heading, 5 −8−1
Inoperative Interrogator, 5 −2−6
INOPERATIVE OR MALFUNCTIONING ADS-B
TRANSMITTER, 5 −2−9
Inoperative/Malfunctioning Transponder, 5 −2−5
Interceptor Operations, 9 −2−4
Interfacility Automated Information Transfer, 5 −4−5
INTERFACILITY CONNECTIVITY, 13 −1−6
Interphone Message Format, 2 −4−3
Interphone Message Termination, 2 −4−4
Interphone Transmission Priorities, 2 −4−2
Intersecting Runway Separation (Arrival), 3 −10−3
Intersecting Runway Separation (Departure), 3 −9−7
INTERVAL MINIMA, 6 −7−2
ISSUANCE OF EFC, 7 −7−1
J
Jettisoning of External Stores, 9 −5−1
K
K−9 Teams, 10 −2−5
L
Landing Area Condition, 3 −3−1
LANDING CHECK, 5 −10−3
Landing Clearance, 3 −10−6
Landing Clearance Without Visual Observation, 3 −10−7
Landing Information (ATCT), 3 −10−1
LAST KNOWN POSITION DETERMINATION,
10−3−3
Lateral Separation (Nonradar), 6 −5−1
Lateral Separation (Oceanic), 8 −4−1
Law Enforcement Operations by Civil and Military
Organizations, 9 −2−5LEVEL FLIGHT RESTRICTION, 6 −7−2
Light Signals (ATCT), 3 −2−1
LIGHTING REQUIREMENTS, 10 −4−1
Line Up and W ait (LUAW), 3 −9−2
LOCAL OPERA TIONS, 7 −5−3
LONGITUDINAL SEPARA TION, 8−7−1
Longitudinal Separation (Nonradar), 6 −4−1
Longitudinal Separation (Oceanic), 8 −3−1
LOST COMMUNICATIONS, 5 −10−2
Low Approach, 4 −8−9
LOW APPROACH AND TOUCH-AND-GO, 5 −10−4
Low Level Wind Shear/Microburst Advisories, 3 −1−3
Lowest Usable Flight Level, 4 −5−2
M
Mach Number Technique, 8 −3−2
Malfunctioning Interrogator, 5 −2−6
MALSR/ODALS, 3 −4−2
Man−Portable Air Defense Systems (MANPADS) Alert,
10−2−5
MANPADS ALERT, 10 −2−5
MANUAL COORDINATION AND THE URET
COORDINATION MENU, 13 −1−2
Manual Input of Computer Assigned Beacon Codes,
2−2−2
Medium Intensity Runway Lights, 3 −4−4
Merging Target Procedures, 5 −1−3
Military DVFR Departures, 2 −2−1
Military Operations above FL 600, 9 −2−7
Military Procedures, 2 −1−6
Military Single Frequency Approaches, 5 −10−5
Military Special Use Frequencies, 9 −2−8
Military Training Routes, 9 −2−2
Military Turbojet En Route Descent, 4 −7−2
MINIMA ALONG OTHER THAN ESTABLISHED
AIRWAYS OR ROUTES, 6 −5−2
MINIMA ON DIVERGING COURSES, 6 −2−1
MINIMA ON OPPOSITE COURSES, 6 −4−5
MINIMA ON SAME COURSE, 6 −2−3
05/26/16 JO 7110.65W CHG 1
Index I−7[References are to page numbers]
MINIMA ON SAME, CONVERGING, OR CROSSING
COURSES, 6 −4−1
Minimum En Route Altitudes, 4 −5−2
Minimum Fuel, 2 −1−4
MIRL, 3−4−4
Miscellaneous Operations, 10 −5−1
Missed Approach, 4 −8−7
Missed Approach (Radar Approach), 5 −10−4
MISSED APPROACHES, 6 −7−2
Mixed Environment (Beacon), 5 −2−1
Mode C Intruder Alert (Host), 5 −14−1
MONITOR AVAILABILITY, 5 −13−1
MONITOR INFORMA TION, 5−13−1
MONITOR ON PAR EQUIPMENT, 5 −13−1
Monitoring Radios, 2 −4−1
MSAW, 5 −15−2
N
NAT, 8−7−3
NAVAID Fixes, 2 −5−2
NAVAID Malfunctions, 2 −1−5
NAVAID Terms, 2 −5−1
NAVAID Use Limitations, 4 −1−1
No−Gyro Approach, 5 −10−2
Nondiscrete Environment (Beacon), 5 −2−1
NONINTERSECTING CONVERGING RUNWAY
OPERATIONS, 3 −9−9
Nonradar, 6 −1−1
Nonradar Initial Separation of Departing and Arriving
Aircraft, 6 −3−1
Nonradar Initial Separation of Successive Departing
Aircraft, 6 −2−1
Nonradar Timed Approaches, 6 −7−1
NONRECEIPT OF POSITION REPORT, 6 −1−1
Nonstandard Formation/Cell Operations, 9 −2−10
NORAD Special Flights, 9 −2−9
North American ICAO Region, 8 −10−1
North American Route Program (NRP), 2 −2−5
North Atlantic ICAO Region, 8 −7−1Notes, 1−2−2
Number Clarification, 2 −4−7
Numbers Usage, 2 −4−5
O
Observed Abnormalities, 3 −1−5
Obstruction Lights, 3 −4−5
Ocean21 − Oceanic, 13 −2−1
Ocean21 ATC System, 13 −2−1
Oceanic Coordination, 8 −2−1
Oceanic Data Entries, 2 −3−5
Oceanic Navigational Error Reporting (ONER)
Procedures, 8 −1−1
Oceanic Procedures, 8 −1−1
Oceanic Separation, 8 −1−1
Oceanic Transition Procedures, 8 −5−1
Oceanic VFR Flight Plans, 8 −1−1
Offshore Procedures, 8 −1−1
Offshore Transition Procedures, 8 −5−1
ONE THOUSAND −ON−TOP, 12−1−1
Open Skies Treaty Aircraft, 9 −2−10
Operational Priority, 2 −1−2
Operational Requests, 2 −1−9
OPERATIONS IN OFFSHORE AIRSPACE AREAS,
8−1−1
OPPOSITE DIRECTION, 8 −5−1
OVERDUE AIRCRAFT, 10 −3−1, 13−1−5
Overhead Maneuver, 3 −10−9
P
Pacific ICAO Region, 8 −9−1
PAR Approaches − Terminal, 5 −12−1
PARACHUTE JUMPING, 12 −1−2
Parachute Operations, 9 −7−1
Parallel Dependent ILS/MLS Approaches, 5 −9−5
Passing or Diverging, 5 −5−5
Personnel on Runways, 3 −1−2
05/26/16 JO 7110.65W CHG 1
Index I−8[References are to page numbers]
PHASES OF EMERGENCY, 10 −6−1
Pilot Acknowledgment/Read Back, 2 −4−1
PILOT DEVIATION NOTIFICATION, 2 −1−12
PIREP Information, 2 −6−1
Point Out, 5 −4−4
POSITION ADVISORIES, 5 −12−1
Position Determination (Airports), 3 −1−2
POSITION INFORMA TION, 5−10−3
Position Information (Radar), 5 −3−2
Position Report (Oceanic), 8 −1−1
Position Reporting (Radar), 5 −1−4
Position Responsibilities, 2 −10−1
Practice Approaches, 4 −8−8
Practice Precautionary Approaches, 3 −10−10
Prearranged Coordination, 5 −4−5
Precision Approach Critical Area, 3 −7−4
Precision Approach Path Indicators (PAPI), 3−4−1
Precision Obstacle Free Zone (POFZ), 3 −7−5
Preventive Control (Airports), 3 −1−1
PRIMARY HOST OUTAGES, 13 −1−6
Primary Radar Identification Methods, 5 −3−1
Priority Interruptions, 2 −4−3
Procedural Letters of Agreement, 1 −1−2
Procedural Preference, 2 −1−1
PROCEDURES FOR WEATHER DEVIATIONS IN
NORTH ATLANTIC (NA T) AIRSPACE, 8 −7−3
PROVIDE SER VICE, 3−1−1
Q
Questionable Identification, 5 −3−2
R
Radar Approaches − Terminal, 5 −10−1
Radar Arrivals, 5 −9−1
RADAR ASSISTANCE TECHNIQUES, 10 −2−3
RADAR ASSISTANCE TO VFR AIRCRAFT IN
WEATHER DIFFICULTY, 10 −2−2Radar Beacon Changes for Military Aircraft, 4 −7−2
Radar Beacon Code Changes, 5 −2−2
RADAR CONTACT LOST, 5 −10−3
Radar Departures, 5 −8−1
Radar Fix Posting, 5 −1−4
Radar Identification, 5 −3−1
RADAR IDENTIFICATION APPLICA TION, 8−5−2
Radar Identification Status, 5 −3−2
Radar Presentation and Equipment Performance, 5 −1−1
Radar Separation, 5 −5−1
Radar Separation Application, 5 −5−1
Radar Separation Minima, 5 −5−2
Radar Separation Vertical Application, 5 −5−5
Radar Service Limitations, 5 −1−3
Radar Service Termination, 5 −1−4
Radar Use, 5 −1−1
Radar−Only Mode, 3 −6−2
Radio and Interphone Communications, 2 −4−1
Radio Communications, 2 −1−7, 2−4−1
Radio Failure (Beacon), 5 −2−3
Radio Frequency Changes for Military Aircraft, 4 −7−2
Radio Message Format, 2 −4−2
Receiver−Only Acknowledgment (ATCT), 3 −2−1
Receiving Controller Handoff, 5 −4−3
Recording Information, 2 −2−1
RECORDING OF CONTROL DATA, 13 −1−2
Reduced Vertical Separation Minimum (RVSM),
2−1−12
Reduction of Route Protected Airspace (Oceanic),
8−4−3
References, 1 −2−3
REFUSAL OF AVOIDANCE CLEARANCE, 8 −6−1
REIL, 3−4−1
Relayed Approach Clearance, 4 −8−6
Release Times, 4 −3−6
REPORTING DEATH, ILLNESS, OR OTHER
PUBLIC HEALTH RISK ON BOARD
AIRCRAFT, 10 −2−7
Reporting Essential Flight Information, 2 −1−5
Reporting Weather Conditions, 2 −6−5
05/26/16 JO 7110.65W CHG 1
Index I−9[References are to page numbers]
Responsibility Transfer to RCC, 10 −3−2
RNAV AIRCRAFT ALONG VOR
AIRWAYS/ROUTES, 6 −4−6
RNAV MINIMA − DIVERGING/CROSSING
COURSES, 6 −5−4
Rotating Beacon, 3 −4−5
Route Amendments, 4 −2−1
Route and NAVAID Description, 2 −5−1
Route Assignment, 4 −4−1
Route Structure Transitions, 4 −4−2
Route Use, 4 −4−1
Routes in Class G Airspace, 4 −4−3
Runway Centerline Lights, 3 −4−4
Runway Edge Lights, 3 −4−3
Runway End Identifier Lights, 3 −4−1
Runway Exiting, 3 −10−8
Runway Proximity, 3 −7−4
Runway Selection, 3 −5−1
RUNWAY STA TUS LIGHTS (RWSL), 3 −4−5
RVR/RVV, 2 −8−1
RVSM, 2−1−12
RWSL, 3−4−5
S
Safety Alert, 2 −1−3
SAFETY LOGIC ALERT RESPONSES, 3 −6−1
Safety Management System (SMS), 1 −1−3
SAME DIRECTION, 8 −5−2
Same Runway Separation (Arrival), 3 −10−2
Same Runway Separation (Departure), 3 −9−4
SAR, 10−3−1
SAR Information to be Forwarded to ARTCC, 10 −3−1
SAR Information to be Forwarded to RCC, 10 −3−1
Sea Lane Operations, 3 −12−1
Search and Rescue, 10 −3−1
Sector Eligibility, 5 −14−2
Security Notice (SECNOT), 9 −2−5
Selected Altitude Limits, 5 −14−2SELECTION, 3 −5−1
SEPARATION BY PILOTS, 6 −4−6, 6−6−1
Separation from Airspace Reservations, 8 −6−1
Separation from Obstructions, 5 −5−7
SEPARATION METHODS, 6 −5−1
SEPARATION MINIMA, 6 −3−1
SEQUENCE INTERRUPTION, 6 −7−2
Sequence/Spacing Application, 3 −8−1
Sequenced Flashing Lights, 3 −4−2
SEQUENCING, 7 −6−1
SERVICE PROVIDED WHEN TOWER IS
INOPERATIVE, 7 −6−3
SERVICES TO RESCUE AIRCRAFT, 10 −6−3
SFA, 4−7−1
Side−Step Maneuver, 4 −8−7
Simulated Flameout (SFO) Approaches, 3 −10−10
Simultaneous Approach and Runway Edge Light
Operation, 3 −4−4
Simultaneous Departures (Radar), 5 −8−1
SIMULTANEOUS INDEPENDENT APPROACHES
TO WIDELY-SPACED PARALLEL RUNWAYS
WITHOUT FINAL MONIT ORS, 5−9−12
Simultaneous Independent Dual ILS/MLS Approaches
− High Update Radar, 5 −9−8
Simultaneous Independent ILS/MLS Approaches −
Dual & Triple, 5 −9−6
Simultaneous Landings or Takeoffs (Helicopter),
3−11−3
Simultaneous Offset Instrument Approaches (SOIA) −
High Update Radar, 5 −9−9
Simultaneous Opposite Direction Operation, 3 −8−2
Simultaneous Same Direction Operation, 3 −8−1
Single Frequency Approaches, 4 −7−1
SMOKE COLUMN A VOIDANCE, 10 −7−1
Spacing and Sequencing (ATCT), 3 −8−1
Special Flights, 9 −1−1
SPECIAL HANDLING, 9 −1−1
Special Interest Sites, 9 −2−4
Special Operations, 9 −2−1
Special Use Airspace, 9 −3−1
05/26/16 JO 7110.65W CHG 1
Index I−10[References are to page numbers]
Special VFR, 7 −5−1
SPECIAL VFR (SVFR), 12 −1−2
Specifying Altitude (Approaches), 4 −8−6
Speed Adjustment, 5 −7−1
Speed Adjustment Minima, 5 −7−3
Speed Adjustment Termination, 5 −7−4
Standby or Low Sensitivity Operation, 5 −2−5
STOL Runways, 3 −5−1
Stop−and−Go Low Approach, 3 −8−1
Successive Departures (Radar), 5 −8−1
SUPERVISORY NOTIFICA TION, 2−1−11
Surface Area Restrictions, 3 −1−5
Surface Areas, 2 −1−7
Surveillance Approaches − Terminal, 5 −11−1
SURVEILLANCE UNUSABLE, 5 −12−3
SVFR, 7−5−1, 12−1−2
Switching ILS/MLS Runways, 4 −7−6
SYSTEM REQUIREMENTS, 5 −15−1
T
Tailwind Components, 3 −5−1
Takeoff Clearance, 3 −9−11
Target Markers, 5 −3−3
Target Resolution, 5 −5−2
Target Separation, 5 −5−1
TAXI AND GROUND MOVEMENT OPERATION,
3−11−1
Taxi and Ground Movement Operations, 3 −7−2
Taxi and Ground Movement Procedures, 3 −7−1
Taxiway Lights, 3 −4−5
TBFM, 11 −1−2
TCAS RESOLUTION ADVISORIES, 2 −1−12
TEAM RESPONSIBILITIES − MULTIPLE PERSON
OPERATION, 13 −2−4
Teletype Flight Data Format − U.S. ARTCCs −
Canadian ACCs, 2 −2−4
Temporary Moving Airspace Reservations, 8 −6−1
Temporary Stationary Airspace Reservations, 8 −6−1Terminal Automation Systems Identification Methods,
5−3−2
Terminal Data Entries (Strips), 2 −3−6
Terminal Radar Service Area, 7 −7−1
Terminal Radar/Nonradar Team Position
Responsibilities, 2 −10−2
TERMINATION OF SERVICE, 7 −6−2
TERMINOLOGY, 2 −8−1
Terms of Reference, 1 −2−1
Terrain Awareness Warning System (TAWS) Alerts,
2−1−13
THE AIRCRAFT LIST (ACL), DEPARTURE LIST
(DL) AND FLIGHT DATA MANAGEMENT,13−1−1
Through Clearances, 4 −2−3
TIME BASED FLOW MANAGEMENT (TBFM),
11−1−2
TIME CHECK, 6 −7−2
Timely Information (ATCT), 3 −3−1
Touch−and−Go Approach, 4 −8−9
Touch−and−Go Low Approach, 3 −8−1
Touchdown Zone Lights, 3 −4−4
TOWER CLEARANCE, 5 −10−4
Tower Team Position Responsibilities, 2 −10−4
Track Separation (Oceanic), 8 −4−4
Track Suspend Function (ARTS), 5 −15−2
Traffic Advisories, 2 −1−
Traffic Information (Airports), 3 −1−2
Traffic Management Procedures, 11 −1−1
TRAFFIC RESTRICTIONS, 10 −4−1
TRANSFER OF CONTROL AND
COMMUNICA TIONS, 8 −2−1
Transfer of Jurisdiction, 4 −7−4
Transfer of Position (SOP), Appendix A −1
TRANSFER OF POSITION RESPONSIBILITY,
2−1−11
Transfer of Radar Identification, 5 −4−1
Transfer of Radar Identification − Methods, 5 −4−1
Transfer of Radar Identification − Terms, 5−4−1
Transfer of Radar Identification − Traffic, 5 −4−2
Transferring Controller Handoff, 5 −4−2
05/26/16 JO 7110.65W CHG 1
Index I−11[References are to page numbers]
TRANSITING ACTIVE SUA/ATCAA, 9 −3−2
TRANSITIONAL PROCEDURE, 5 −9−13
TRANSMISSION ACKNOWLEDGMENT, 5 −10−4
Transmit Proposed Flight Plan, 2 −2−3
TRIAL PLANNING, 13 −1−1
TRSA, 7−7−1
TRSA DEPARTURE INFORMA TION, 7−7−1
TRSA Separation, 7 −7−1
U
Unauthorized Laser Illumination of Aircraft, 2 −9−2,
10−2−5
Unidentified Flying Object (UFO) Reports, 9 −8−1
Unmanned Free Balloons, 9 −6−1
Unmonitored NAVAIDs (Holding), 4 −6−3
Unsafe Runway Information, 3 −3−1
URET AIRSPACE CONFIGURATION ELEMENTS,
13−1−6
URET−BASED CLEARANCES, 13 −1−1
USAF/USN Undergraduate Pilots (Strips), 2 −3−10
Use of Active Runways, 3 −1−1
USE OF GRAPHICS PLAN DISPLAY (GPD), 13 −1−6
Use of MARSA, 2 −1−5
Use of PAR for Approach Monitoring − Terminal,
5−13−1
Use of Tower Radar Displays, 3 −1−5
User Request Evaluation Tool (URET), 13 −1−1
V
Validation of Mode C Readout, 5 −2−6
VASI, 3−4−1
Vectoring, 5 −6−1
Vectors Across Final Approach Course, 5 −9−2
Vectors Below Minimum Altitude, 5 −6−2
Vectors for Visual Approach, 7 −4−1
Vectors to Final Approach Course, 5 −9−1
Vehicles on Runways, 3 −1−2
Vertical Application Exceptions, 5 −5−5Vertical Separation (Nonradar), 6 −6−1
Vertical Separation Minima, 4 −5−1
VFR − IFR Flights, 4 −2−3
VFR AIRCRAFT IN CLASS B AIRSPACE, 7 −9−1
VFR Aircraft in Weather Difficulty, 10 −2−2
VFR Basic Radar Service (Terminal), 7 −6−1
VFR CLIMB AND DESCENT, 8 −8−3
VFR Code Assignments, 5 −2−3
VFR Conditions, 7 −1−1
VFR DEPARTURE INFORMA TION, 7−6−2
VFR MINIMA, 10 −7−1
VFR Release of IFR Departure, 4 −3−8
VFR−on−top, 7−3−1
VFR−on−top (NAVAID Use), 4 −1−2
Visual, 7−1−1
Visual Approach Slope Indicators, 3 −4−1
Visual Approaches, 7 −4−1
Visual Holding of VFR Aircraft, 7 −1−1
VISUAL REFERENCE REPORT, 5 −11−1
VISUAL SEPARA TION, 7−2−1
Visual Signals (ATCT), 3 −2−1
Visually Scanning Runways, 3 −1−6
Volcanic Ash, 10 −2−6
W
Wake Turbulence, 2 −1−9
Wake Turbulence Cautionary Advisories, 2 −1−9
Wake Turbulence Separation for Intersection
Departures, 3 −9−6
Warning Signal (ATCT), 3 −2−1
Washington, DC, Special Flight Rules Area (DC
SFRA), 9 −2−4
Weather and Chaff Services, 2 −6−2
Weather Deviations, 8 −9−4
Weather Deviations in North Atlantic (NAT) Airspace,
8−7−3
Weather Familiarization, 2 −6−1
Weather Information, 2 −6−1
05/26/16 JO 7110.65W CHG 1
Index I−12[References are to page numbers]
Weather Information (Arrivals), 4 −7−3
Weather Reconnaissance Flights, 9 −2−9
WHEELS DOWN CHECK, 2 −1−11Withholding Landing Clearance, 3 −10−8
Word Meanings, 1 −2−1
Words and Phrases (Communications), 2 −4−4
Federal Aviation
AdministrationJO 7110.65W
12/10/15
Initiated By: AJV −0
Vice President, Mission Support ServicesBRIEFING GUIDE
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL A VIATION ADMINISTRATION
12/10/15 JO 7110.65W
Briefing Guide BG−2Table of Contents
Paragraph
NumberTitle Page
1-1-7 DELIVERY DATES .............................................. BG-5
1-2-6 ABBREVIA TIONS ............................................... BG-6, 23,
2-1-6 SAFETY ALERT ................................................. BG-23, 29
2-1-19 WAKE TURBULENCE ............................................ BG-30
2-1-20 WAKE TURBULENCE CAUTIONARY ADVISORIES .................. BG-30
2-2-11 FORWARDING AMENDED AND UTM DATA ........................ BG-6
2-3-8 AIRCRAFT EQUIPMENT SUFFIX .................................. BG-34
2-4-14 WORDS AND PHRASES .......................................... BG-30
2-4-21 DESCRIPTION OF AIRCRAFT TYPES .............................. BG-30
2-6-2 HAZARDOUS INFLIGHT WEATHER ADVISORY SERVICE (HIWAS) . . . BG-6
2-10-1 EN ROUTE SECTOR TEAM POSITION RESPONSIBILITIES ........... B G −6
3-3-5 BRAKING ACTION ADVISORIES ................................. B G −30
3-7-3 GROUND OPERATIONS .......................................... B G −30
3-9-6 SAME RUNWAY SEPARATION .................................... B G −35
3-9-7 WAKE TURBULENCE SEPARATION FOR INTERSECTI ON DEPARTURES BG −35
3-9-8 INTERSECTING RUNWAY/INTERSECTING FLIGHT PATH OPERATIONS BG −35
3-9-9 NONINTERSECTING CONVERGING RUNWAYOPERATIONS ......... B G −35,
3-10-3 SAME RUNWAY SEPARATION .................................... B G −35
3-10-4 INTERSECTING RUNWAY/INTERSECTING FLIGHT PATH OPERATIONS BG −35
3-10-10 ALTITUDE RESTRICTED LOW APPROACH ........................ B G −30
4-3-2 DEPARTURE CLEARANCE ....................................... B G −55
4−5−3 EXCEPTIONS ................................................... B G −6
4−6−3 DELAYS ....................................................... B G −6
4−8−1 APPROACH CLEARANCE ........................................ B G −55
4−8−11 PRACTICE APPROACHES ........................................ B G −30,
5−1−6 SERVICE LIMITATIONS .......................................... B G −6
5−2−2 DISCRETE ENVIRONMENT ...................................... B G −6
5−2−13 CODE MONITOR ................................................ B G −23
5−2−17 V ALIDATION OF MODE C READOUT .............................. B G −6, 23
5−3−3 BEACON IDENTIFICATION METHODS ............................ B G −6
5−3−8 TARGET MARKERS ............................................. B G −6
5−4−2 TERMS ........................................................ B G −74
5−4−3 METHODS ..................................................... B G −6
5−4−5 TRANSFERRING CONTROLLER HANDOFF ........................ B G −6
12/10/15 JO 7110.65W
Briefing Guide BG−35−4−6 RECEIVING CONTROLLER HANDOFF ............................. B G −23
5−4−7 POINT OUT .................................................... B G −6
5−4−11 EN ROUTE FOURTH LINE DATA BLOCK USAGE .................... B G −6
5−5−2 TARGET SEPARATION ........................................... B G −23
5−5−4 MINIMA ....................................................... B G −6, 23,
5−5−7 PASSING OR DIVERGING ........................................ B G −30
5−5−9 SEPARATION FROM OBSTRUCTIONS ............................. B G −6
5−5−10 ADJACENT AIRSPACE ........................................... B G −6
5−5−11 EDGE OF SCOPE ................................................ B G −6
5−6−1 APPLICATION .................................................. B G −74
5−6−2 METHODS ..................................................... B G −6
5−8−3 SUCCESSIVE OR SIMULTANEOUS DEPARTURES ................... B G −35
5−8−5 DEPARTURES AND ARRIV ALS ON PARALLEL OR NONINTERSECTING
DIVERGING RUNWAYS .......................................... B G −35
5−9−6 SIMULTANEOUS INDEPENDENT APPROACHES .................... B G −74
5−9−7 SIMULTANEOUS INDEPENDENT APPROACHES −DUAL AND TRIPLE BG −76
5−9−8 SIMULTANEOUS INDEPENDENT CLOSE PARALLEL APPROACHES −
HIGH UPDATE RADAR .......................................... B G −79
5−9−9 SIMLUTANEOUS INDEPENDENT CLOSE PARALLEL APPROACHES −
HIGH UPDATE RADAR NOT REQUIRES ........................... B G −79
5−9−10 SIMULTANEOUS OFFSET INSTRUME NT APPROACHES (SOIA) HIGH
UPDATE RADAR ................................................ B G −79
5−9−11 SIMULTANEOUS INDEPENDENT APPROACHES TO WIDELY SPACED
PARALLEL RUNWAYS WITHOUT FINAL MONITORS ................BG−79
5−9−11 TRANSITIONAL PROCEDURES ................................... B G −87
5−14−1 CONFLICE ALERT (CA) AND MODE C INTRUDER (MCI)
ALERT ......................................................... B G −6
5−14−3 COMPUTER ENTRY OF ASSIGNED ALTITUDE ..................... B G −6
5−14−5 SELECTED ALTITUDE LIMITS .................................... B G −6
5−14−8 CONTROLLER INITIATED COAST TRACKS ........................ B G −15
5−14−9 ERAM COMPUTER ENTRIES OF HOLD INFORMATION .............. B G −6
5−14−10 ERAM VISUAL INDICATOR OF SPECIAL ACTIVITY AIRSPACE (SAA)
S A T U S ......................................................... B G −6
5−15−1 APPLICATION .................................................. B G −23
Chapter 5,
Section 16TPX−42−TERMINAL ............................................. B G −23
6−1−4 ADJACENT AIRPORT OPERATION ................................ B G −35
6−1−5 ARRIV AL MINIMA .............................................. B G −35
6−7−5 ARRIV AL MINIMA .............................................. B G −35
7−2−1 VISUAL SEPARATION ........................................... B G −30
7−3−1 VFR −ON−T O P .................................................. B G −73
12/10/15 JO 7110.65W
Briefing Guide BG−47−4−3 CLEARANCE FOR VISUAL APPROACH ............................ B G −35
7−4−4 APPROACHES TO MULTIPLE RUNWAYS .......................... B G −35
7−6−1 BASIC RADAR SERVICE TO VFR AIRCRAFT ....................... B G −23
7−6−7 SEQUENCING .................................................. B G −35
7−7−3 SEPARATION ................................................... B G −23
7−8−3 SEPARATION ................................................... B G −23
7−9−4 SEPARATION ................................................... B G −23
8−1−7 OCEANIC NA VIGATIONAL ERROR REPORTING (ONER) PROCEDURES BG −28
10−2−5 EMERGENCY SITUATIONS ...................................... B G −6
10−6−5 SERVICES TO RESCUE AIRCRAFT ................................ B G −73
11−1−2 DUTIES AND RESPONSIBILITIES ................................. B G −6
13−1−1 DESCRIPTION .................................................. B G −6
13−1−2 CONFLICT DETECTION AND RESOLUTION ........................ B G −6
13−1−3 TRAIL PLANNING .............................................. B G −6
13−1−4 URET −BASED CLEARANCES ..................................... B G −6
13−1−5 THE AIRCRAFT LIST (ACL), DEPARTURE LIST (DL), AND FLIGHT DATA
MANAGEMENT .................................................BG−6
13−1−6 MANUAL COORDINATION AND THE COORDINATION
MENU ......................................................... B G −6
13−1−7 HOLDING ...................................................... B G −6
13−1−8 RECORDING OF CONTROL DATA ................................. B G −6
13−1−9 ACKNOWLEDGMENT OF AUTOMATED NOTIFICATION ............. B G −6
13−1−10 CURRENCY OF TRAJECTOR INFORMATION ....................... B G −6
13−1−11 DELAY REPORTING ............................................. B G −6
13−1−12 OVERDUE AIRCRAFT ........................................... B G −6
13−1−14 FORCAST WINDS ............................................... B G −6
13−1−15 INTERFACILITY CONNECTIVITY ................................. B G −6
13−1−16 PRIMARY RDP/FDP ............................................. B G −6
13−1−17 URET AIRSPACE CONFIGURATION ELEMENTS .................... B G −6
12/10/15 JO 7110.65W
Briefing Guide BG−51. PARAGRAPH NUMBER AND TITLE: 1-1-7. DELIVERY DATES
2. BACKGROUND: Headquarters, Air Force Flight Standards Agency (AFFSA), is the office of primary
responsibility for Air Force air traffic control operations. Subordinate units throughout the country, and those
overseas, informed personnel at HQ AFFSA that their units/flights had not received the most recent publication
and that the contact information listed in the order appeared to be incorrect. After reviewing the information inthe order, it was determined that the information was incorrect and HQ AFFSA requested a document change
proposal to provide these facilities with the correct address/information to obtain late orders/publication. This
change will resolve the potential of facilities not ha ving current publications available for reference and
reduces/eliminates a potential impact on flight safety.
3. CHANGE:
OLD
NEW
1-1-7. DELIVERY DATES 1-1-7. DELIVERY DATES
Title through b No Change
OLD
TBL 1-1-2
Military Distribution Contacts
Military
HeadquartersDSN Commercial
U.S. ArmyUSAASA656-4868 (703) 806-4868
U.S. Air ForceContact Local
*NGA Customer
Account Represent-
ative
U.S. Navy
CNO (N885F)664-7727 (703) 604-7727
* NGA – National Geospatial/Intelligence Agency
NEW
TBL 1-1-2
Military Distribution Contacts
MilitaryHeadquartersDSN Commercial
U.S. ArmyUSAASA656-4868 (703) 806-4868
U.S. Air ForceHQ AFFSA884-5509 (405) 734-5509
U.S. NavyCNO (N980A)224−2638 (703) 614 −2638
12/10/15 JO 7110.65W
Briefing Guide BG−61. PARAGRAPH NUMBER AND TITLE:
1-2-6. ABBREVIATIONS
2-2-11. FORWARDING AMENDED AND UTM DATA2-6-2. HAZARDOUS INFLIGHT WEATHER ADVISORY SERVICE (HIWAS)2-10-1. EN ROUTE SECTOR TEAM POSITION RESPONSIBILITIES
4-5-3. EXCEPTIONS
4-6-3. DELAYS5-1-6. SERVICE LIMITATIONS5-2-2. DISCRETE ENVIRONMENT
5-2-17. V ALIDATION OF MODE C READOUT
5-3-3. BEACON IDENTIFICATION METHODS5-3-8. TARGET MARKERS5-4-3. METHODS5-4-5. TRANSERRING CONTROLLER HANDOFF
5-4-7. POINT OUT
5-4-11. EN ROUTE FOURTH LINE DATA BLOCK USAGE5-5-4. MINIMA5-5-9. SEPARATION FROM OBSTRUCTIONS
5-5-10. ADJACENT AIRSPACE
5-5-11. EDGE OF SCOPE5-6-2. METHODS5-14-1. CONFLICT ALERT (CA) AND MODE C INTRUDER (MCI) ALERT
5-14-3. COMPUTER ENTRY OF ASSIGNED ALTITUDE
5-14-5. SELECTED ALTITUDE LIMITS5-14-8. CONTROLLER INITIATED COAST TRACKS5-14-9. ERAM COMPUTER ENTRIES OF HOLD INFORMATION
5-14-10. ERAM VISUAL INDICATOR OF SPECIAL ACTIVITY AIRSPACE (SSA) STATUS
10-2-5. EMERGENCY SITUATIONS11-1-2. DUTIES AND RESPONSIBILITIES13-1-1. DESCRIPTION 13-1-2. CONFLICT DETECTION AND RESOLUTION
13-1-3. TRIAL PLANNING
13-1-4. URET −BASED CLEARANCES
13-1-5. THE AIRCRAFT LIST (ACL), DEPARTURE (DL), AND FLIGHT DATA MANAGEMENT13-1-6. MANUAL COORDINATION AND THE COORDINATION MENU
13-1-7. HOLDING
13-1-8. RECORDING OF CONTROL DATA13-1-9. ACKNOWLEDGEMENT OF AUTOMATED NOTIFICATION13-1-10. CURRENCY OF TRAJECTORY INFORMATION
13-1-11. DELAY REPORTING
13-1-12. OVERDUE AIRCRAFT13-1-14. FORCAST WINDS13-1-15. INTERFACILITY CONNECTIVITY13-1-16. PRIMARY RDP/FDP OUTAGES
13-1-17. URET AIRSPACE CONFIGURATION ELEMENTS
2. BACKGROUND: Several years ago the F AA began replacing the En Route legacy computer system known
as Host, with a new NextGen enabling system known as En Route Automation Modernization (ERAM). The
installation of ERAM was accomplished using a waterfall implementation process over the span of many years.
During this transition period the guidance for air traffic control services operating under ERAM was found inFAA Order JO 71 10.311. Now that the transition nears completion, FAA Order 71 10.311C is being incorporated
12/10/15 JO 7110.65W
Briefing Guide BG−7into FAA Order JO 7110.65. During this process certain outdated terms that are no longer used in the field were
identified. The decision was made to use this opportunity to update the handbook by eliminating or amending the
outdated terminology.
3. CHANGE:
OLD NEW
1-2-6. ABBREVIATIONS 1-2-6. ABBREVIATIONS
Add Automation Embedded Route Text (AERT)
Add Enhanced Backup Surveillance System (EBUS)
Add En Route Decision Support Tool (EDST)
Add Enhanced Limited Data Block (ELDB)
Add En Route Automation Modernization (ERAM)
Add Full Data Block (FDB)
Add Surveillance Data Processing (SDP)
Direct Access Radar Channel (DARC) Delete
Host Embedded Route Text (HERT) Delete
Radar Data Processing (RDP) Delete
User Request Evaluation Tool (URET) Delete
OLD NEW
2-2-11. FORWARDING AMENDED AND
UTM DATA2-2-11. FORWARDING AMENDED AND
UTM DATA
Title through d No Change
Add e. EN ROUTE. When a controller receives a
UTM notification to an FDIO only facility, they
must effect manual coordination for the flight
plan data. In addition, the contr oller must verify
the flight plan data to the receiving facility
within three minutes of the transfer of control
point estimate.
Add NOTE−
FDIO only facilities are facilities with FDIO but
without ARTS or STARS.
OLD NEW
2-6-2. HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE (HIWAS)2-6-2. HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE (HIWAS)
Title through c No Change
Add d. EN ROUTE . ERAM. Controllers must
electronically acknowledge hazardous weather
information messages after appropriate action
has been taken.
Add NOTE−
EN ROUTE. While hazardous weather information is
commonly distributed via the SIGMET View, it is
possible to receive the information via the GI View.
12/10/15 JO 7110.65W
Briefing Guide BG−8OLD NEW
2-10-1. EN ROUTE SECTOR TEAM
POSITION RESPONSIBILITIES2-10-1. EN ROUTE SECTOR TEAM
POSITION RESPONSIBILITIES
Title through c1(f) No Change
(g) Scan radar display. Correlate with flight
progress strip information or User Request
Evaluation Tool (URET) data, as applicable.(g) Scan radar display. Correlate with flight
progress strip information or EDST data, as
applicable.
c1(h) No Change
(i) Ensure strip marking and/or URET entries
are completed on instructions or clearances you
issue or receive.(i) Ensure strip marking and/or electronic
flight data entries are completed on instructions or
clearances you issue or receive.
c1(j) through c1(k) No Change
Add (l) At ERAM facilities, ensure the situation
display accurately reflects the status of all SAAs
that impact their area of control responsibility.
c2 through c2a No Change
(b) At URET facilities , use URET information
to plan, organize, and expedite the flow of traffic.(b) Where available , use EDST to plan,
organize, and expedite the flow of traffic.
c2(c) through c2(h) No Change
(i) Scan flight progress strips and/or URET
data. Correlate with radar data.(i) Scan flight progress strips and/or EDST
data. Correlate with radar data.
(j) Manage flight progress strips and/or URET
flight data.(j) Manage flight progress strips and/or
electronic flight data.
c2(k) No Change
(l) As appropriate, ensure strip marking and/or
URET entries are completed on instructions issued
or received, and record instructions issued orreceived by the radar position when aware of them.(l) As appropriate, ensure strip marking and/or
EDST
data entries are completed on instructions
issued or received, and record instructions issued or
received by the radar position when aware of them.
c2(m) No Change
(n) Where authorized, perform URET data
entries to keep the activation status of designated
URET Airspace Configuration Elements current.(n) Where authorized, perform EDST data
entries to keep the activation status of designated
Airspace Configuration Elements current.
Add (o) At ERAM facilities, scan the radar
associate display for electronically distributed
information, evalua te the information, and take
action as appropriate.
c3 through c4(c) No Change
(d) Ensure flight data processing equipment is
operational, except for URET capabilities.(d) Ensure flight data processing equipment is
operational, except for EDST capabilities.
12/10/15 JO 7110.65W
Briefing Guide BG−9OLD NEW
4-5-3. EXCEPTIONS 4-5-3. EXCEPTIONS
Title through a2 No Change
NOTE−
Those en r oute facilities using host software that pr ovides
capability for passing interim altitude shall include the
specific operations and procedures for use of this
procedure in a letter of agreement between the
appropriate facilities.Delete
OLD NEW
4-6-3. DELAYS 4-6-3. DELAYS
Title through b1 No Change
Add REFERENCE −
FAAO7110.65, Para 5-14-9, ERAM Computer Entry of Hold
Information
OLD NEW
5-1-6. SERVICE LIMITATIONS 5-1-6. SERVICE LIMITATIONS
Title through a3 No Change
b. EN ROUTE. When the position symbol
associated with the full data block falls more than
one history behind the actual aircraft target or thereis no target symbol displayed, the Mode C
information in the full
data block must not be used
for the purpose of determining separation.b. EN ROUTE. When the position symbol
associated with the data block falls more than one
history behind the actual aircraft tar get or there is no
target symbol displayed, the Mode C information in
the data block must not be used for the purpose of
determining separation.
OLD NEW
5-2-2. DISCRETE ENVIRONMENT 5-2-2. DISCRETE ENVIRONMENT
Title through NOTE 1 No Change
2. When an IFR aircraft, or a VFR aircraft that has been
assigned a beacon code by the hos t computer and whose
flight plan will terminate in another facility’ s area,
cancels ATC service or does not activate the flight plan,
send a remove strips (RS) message on that aircraft via
host keyboard, the FDIO keyboard, or call via service F .2. When an IFR aircraft, or a VFR aircraft that has been
assigned a beacon code by the ARTCC computer and
whose flight plan will terminate in another facility’ s area,
cancels ATC service or does not activate the flight plan,
ensure that appropriate action is taken to remove strips
(RS message) on that aircraft.
OLD NEW
5-3-3. BEACON IDENTIFICATION
METHODS5-3-3. BEACON IDENTIFICATION
METHODS
Title through c No Change
d. EN ROUTE. During narrowband operations , an
aircraft may be considered identified when the full
data block is automatically associated with thebeacon target symbol of an aircraft that is
squawking a discrete code assigned by the
computer.d. EN ROUTE. A
n aircraft may be considered
identified when the full data block is automatically
associated with the beacon target symbol of anaircraft that is squawking a discrete code assigned
by the computer.
Add
NOTE−
Paired LDBs in ERAM do not display a beacon code.
12/10/15 JO 7110.65W
Briefing Guide BG−10OLD NEW
5-3-8. TARGET MARKERS 5-3-8. TARGET MARKERS
EN ROUTE No Change
Retain data blocks that are associated with the
appropriate target symbol in order to maintain
continuous identity of aircraft. Retain the data block
until the aircraft has exited the sector or delegated
airspace, and all potential conflicts have beenresolved; including an aircraft that is a point out.
The data block shall display flight identification and
altitude information, as a minimum. The displayedaltitude may be assigned, interim, or reported.No Change
Add ERAM: When you have separation responsibil-
ity for an aircraft and a paired track exists,
display a full data block (FDB).
OLD NEW
5-4-3. METHODS 5-4-3. METHODS
a1 through a3 No Change
NOTE−
EN ROUTE . Interfacility handoff capabilities are
available that can be manually initiated and accepted
when operating on the backup RDP while FDP is
available. The backup RDP by itself does not have the
capabilities for interfacility handoffs. Therefore,
handoffs between facilities must be made via landline
voice communications when operating with the backup
RDP only.NOTE−
Automated handoff capabilities are only available when
FDP is operational.
a4 through b3 No Change
NOTE−
1. When physically pointing to the target, you do not
have to state the aircraft position.NOTE−
When physically pointing to the target, you do not have
to state the aircraft position.
2. Those en route facilities using host software that
provides capability for passing interim altitude shall
include the specific operations and pr ocedures for use of
this procedure in a LOA between the appropriate
facilities.Delete
OLD NEW
5-4-5. TRANSFERRING CONTROLLER
HANDOFF5-4-5. TRANSFERRING CONTROLLER
HANDOFF
Title through b No Change
NOTE−
Those en r oute facilities using host software that pr ovides
capability for passing interim altitude shall include the
specific operations and pr ocedures for use of this pr oced-
ure in a LOA between the appropriate facilities.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−11OLD NEW
5-4-7. POINT OUT 5-4-7. POINT OUT
Title through a2 No Change
NOTE−
Those en route facilities using HOST software that
provides capability for passing interim altitude shall
include the specific operations and pr ocedures for use of
this procedure in a LOA between the appropriate
facilities.Delete
OLD NEW
5-4-11 EN ROUTE FOURTH LINE DATA
BLOCK USAGE5-4-11 EN ROUTE FOURTH LINE DATA
BLOCK USAGE
a. The en route fourth line data block must be used
to forward only the specified control information
listed below. Any additional control information
must be forwarded via other communication
methods. En route fourth line data block f ree text
area may be used by individual sector teams for
recording any additional information the team
deems appropriate for managing the sector, butmust be removed prior to initiation of identification
transfer.a. The fourth line of the data block must be
displayed. When used for forwarding control
information, only the specified messages listed in
this section may be used. Any additional control
information must be forwarded via other
communications methods. F ree text may be used by
individual sector teams for recording information
the team deems appropriate for managing thesector, but must be removed prior to initiation of
identification transfer.
REFERENCE −
REFERENCE −
F AAO JO 7110.65, Para 5 −4−5, Transferring Controller Handoff,
subpara b.REFERENCE −
F AAO JO 7110.65, Para 5 −4−5, Transferring Controller Handoff,
subpara b.FAAO JO 7110.65, Para 5 −4−8, Automated Information Transfer
(AIT).
FAAO JO 7110.65, Para 5 −4−9, Interfacility Automated
Information Transfer.
b through k EXAMPLE No Change
l. The acceptance of a handoff by the receiving
controller must constitute receipt of the information
contained within the en route fourth line data block.
It is the responsibility of the receiving controller to
advise the transferring controller if any information
is not understood, or needs to be revised.l. The acceptance of a handoff by the receiving
controller must constitute receipt of the information
contained within the en route fourth line data block.
This information must not be modified outside
of the controller’s area of jurisdiction unless
verbally coordinated or specified in a Letter of
Agreement or Facility Directive . It is the
responsibility of the receiving controller to advisethe transferring controller if any information is not
understood, or needs to be revised.
OLD
NEW
5-5-4. MINIMA 5-5-4. MINIMA
Title through b No Change
c. Stage A/DARC , Terminal Mosaic/
Multi-Sensor Modec. EBUS, Terminal Mosaic/Multi-Sensor Mode
NOTE through c2 No Change
3. For areas meeting all of the following
conditions:3. Facility directives may specify 3 miles for
areas meeting all of the following conditions:
c3(a) through c3(c) No Change
12/10/15 JO 7110.65W
Briefing Guide BG−12(d) Below FL 180 (d) Up to and including FL 230.
(e) Facility directives specifically define the
area where the separation can be applied. Facility
directives may specify 3 miles.(e) Facility directives specifically define the
area where the separation can be applied and define
the requirements for displaying the area on the
controller’s display.
REFERENCE −
F AAO JO 7210.3, Para 8-2-1, Single Site Coverage Stage A
Operations.
F AAO JO 7210.3, Para 11-8-15, Single Site Coverage ATTSREFERENCE −
F AAO JO 7210.3, Para 8-2-1, Three Mile Airspace Operations
F AAO JO 7210.3, Para 11-8-15, Single Site Coverage ATTS
Operations
c4(a) through c4(d) No Change
Add d. ERAM:
Add 1. Below FL 600- 5 miles.
Add 2. At or above FL 600- 10 miles
Add 3. Below FL 230 where all the following
conditions are met – 3 miles:
Add (a) Significant operational advantages can
be obtained.
Add (b) Within 40 miles of the preferred sensor,
and within the 3 NM separation area.
Add (c) The preferred sensor is providing
reliable beacon targets.
Add (d) Facility dir ectives specifically define the
3 NM separation area.
Add (e) The 3 NM separation area is displayable
on the video map.
Add (f) Involved aircraft are displayed using the
3 NM target symbol.
Add 4. When transitioning from terminal to en
route control, 3 miles increasing to 5 miles or
greater, provided:
Add (a) The aircraft are on diverging
routes/courses, and/or
Add (b) The leading aircraft is and will remain
faster than the following aircraft; and
Add (c) Separation constantly increasing and the
first center controller will establish 5 NM or
other appropriate form of separation prior to
the aircraft departing the first center sector; and
Add (d) The procedure is covered by a letter of
agreement between the facilities involved and
limited to specified routes and/or
sectors/positions.
Add REFERENCE −
FAAO JO 7210.3, Para 8-2-1, Three Mile Airspace Operations
FAAO JO 7210.3, Para 11-8-15, Single Site Coverage ATTS
Operations
d and e Reletter to e and f
12/10/15 JO 7110.65W
Briefing Guide BG−13OLD NEW
5-5-9. SEPARATION FROM
OBSTRUCTIONS5-5-9. SEPARATION FROM
OBSTRUCTIONS
a. Except in En Route Stage A/DARC or Stage
A/EDARC, s eparate aircraft from obstructions
depicted on the radar display by the followingminima:a. TERMINAL
. Separate aircraft from
obstructions depicted on the radar display by the
following minima:
a1 and a2 No Change
b. Except in En Route Stage A/DARC or Stage
A/EDARC, vertical separation of aircraft above an
obstruction depicted on the radar display may bediscontinued after the aircraft has passed it.b. TERMINAL.
Vertical separation of aircraft
above an obstruction depicted on the radar display
may be discontinued after the aircraft has passed it.
c. Stage A/DARC or Stage A/EDARC, a pply the
radar separation minima specified in para 5-5-4,
Minima, subpara b1.c. EAS. Apply the radar separation minima
specified in Para 5-5-4, Minima.
OLD NEW
5-5-10. ADJACENT AIRSPACE 5-5-10. ADJACENT AIRSPACE
Title through a2 No Change
3. En route Stage A/DARC or Stage A/EDARC: 3. EAS:
b1 and b2 No Change
3. En route Stage A/DARC or Stage A/EDARC: 3. EAS:
OLD NEW
5-5-11. EDGE OF SCOPE 5-5-11. EDGE OF SCOPE
Title through b No Change
c. En route Stage A/DARC or Stage A/EDARC: c. EAS:
OLD NEW
5-6-2. METHODS 5-6-2. METHODS
a through g No Change
h. During stage A operation , update the route of
flight in the computer unless an operational
advantage is gained and coordination isaccomplished.h. When flight data processing is available,
update the route of flight in the computer unless an
operational advantage is gained and coordination is
accomplished.
OLD NEW
5-14-1. CONFLICT ALERT (CA) AND
MODE C INTRUDER (MCI) ALERT5-14-1. CONFLICT ALERT (CA) AND
MODE C INTRUDER (MCI) ALERT
Title through a No Change
NOTE−
DARC does not have CA/MCI alert capability.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−14OLD NEW
5-14-3. COMPUTER ENTRY OF ASSIGNED
ALTITUDE5-14-3. COMPUTER ENTRY OF FLIGHT
PLAN INFORMATION
The data block must always reflect the current
status of the aircraft unless otherwise specified in a
facility directive. Whenever an aircraft is cleared to
maintain an altitude different from that in the flight
plan database, enter into the computer one of the
following:Delete
NOTE−
A facility directive may be published deleting the interim
altitude computer entry requirements of subpara b. The
directive would apply to those conditions where heavy
traffic or sector complexity preclude meeting these entry
requirements.Delete
REFERENCE −
FAAO JO 7210.3, Para 8 −2−7, Waiver to Interim Altitude
Requirements.Delete
Add a. Altitude
Add 1. The altitude field(s) of the data block must
always reflect the current status of the aircraft
unless otherwise specified in an appropriate
facility directive.
Add NOTE−
As it applies to altitude, the current status of the
aircraft, for the transferring controller, indicates the
clearance given by air traffic control, directly to and
read back by an aircraft. This ensures the aircraft has
received the clearance and is expected to comply with
the instructions. The current status of the aircraft, for
the receiving controller, indicates the specific verbally
coordinated altitude, if that differs from the altitude
coordinated by automated means.
Add 2. Assigned and Interim altitude information
must not be modified outside of the controller’s
area of jurisdiction unless verbally coordinated
or specified in a Letter of Agreement or Facility
Directive .
Add 3. Whenever an aircraft is cleared to
maintain an altitude different from that in the
flight plan database, enter into the computer one
of the following:
a. The new assigned altitude if the aircraft will
(climb or descend to and) maintain the new altitude,
or(a) The new assigned altitude if the aircraft will
(climb or descend to and) maintain the new altitude,
or
b. An interim altitude if the aircraft will (climb or
descend to and) maintain the new altitude for a short
period of time and subsequently be recleared to the
altitude in the flight plan database or a new altitude
or a new interim altitude.(b) An interim altitude if the aircraft will
(climb or descend to and) maintain the new altitude
for a short period of time and subsequently berecleared to the altitude in the flight plan database
or a new altitude or a new interim altitude , or
12/10/15 JO 7110.65W
Briefing Guide BG−15NOTE−
Use of the interim altitude function will ensure that the
data block reflects the actual status of the aircraft and
eliminate superfluous altitude updates.Delete
Add (c) A Local Interim Altitude (LIA), entered
by the transferring controller when the assigned
altitude differs from the coordinated altitude
unless verbally coordinated or specified in a
Letter of Agreement or Facility Directive.
Add NOTE−
A facility directive may be published, in accordance
with JO 7210.3, Paragraph 8-2-7, Waiver to Interim
Altitude Requirements, deleting the interim altitude
computer entry requirements of subpara 3(b).
Add b. Flight Plan Route Data
Add This information must not be modified outside
of the controller’s area of jurisdiction unless
verbally coordinated or specified in a Letter of
Agreement or Facility Directive .
OLD NEW
5-14-5. SELECTED ALTITUDE LIMITS 5-14-5. SELECTED ALTITUDE LIMITS
Title through a No Change
b. 2,200 feet above the highest and below the
lowest flight level of the sector where 2,000 feet
vertical separation is applicable.No Change
NOTE−
1. The data block, for purposes of this paragraph, must
contain the beacon code and Mode C altitude at a
minimum.NOTE−
1. The data block, for purposes of this paragraph, must
contain the Mode C altitude and call sign or beacon
code at a minimum.
OLD NEW
5-14-8. CONTROLLER INITIATED COAST
TRACKS5-14-8. CONTROLLER INITIATED COAST
TRACKS
Title through a NOTE 1 No Change
2. DARC does not have the capability to initiate
coast tracks2. EBUS does not have the capability to initiate
coast tracks
b. Prior to initiating a coast track, ensure the
following :b. Prior to initiating a coast track, ensure that a
departure message or progress report
corresponding with the aircraft’s current
position is entered into the computer.
1. A departure message or progress report
corresponding with the aircraft’s current position is
entered into the computer.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−162. The track being started is within the Posted
Time Update Interval (PTUI) of the aircraft’s
Computer-estimated position and the Flight Plan
Track Position Difference (FTPD) distance of the
aircraft’s flight plan route.Delete
NOTE−
FTPD is an automation parameter, normally set to
15_miles, that is compared with the tracked target’ s
perpendicular distance from the stor ed flight plan route.
If the track is within the parameter miles, it is eligible for
“FLAT tracking.” PTUI is an automation parameter,
normally set to 3 minutes, that is compared against the
difference between the calculated time of arrival and the
actual time of arrival over a fix. If the difference is gr eater
than PTUI, the flight plan’ s stored data will be revised
and fix-time update messages will be generated.Delete
OLD NEW
Add 5-14-9. ERAM COMPUTER ENTRY OF
HOLD INFORMATION
Add a. When an aircraft is issued holding
instructions, the delay is ATC initiated, and the
EFC is other than “no delay expected:”
Add 1. Enter a hold message.
Add 2. Maintain a paired track.
Add 3. Enter an EFC time via a hold message, the
Hold Data Menu, or the Hold View.
Add 4. Enter non-published holding instructions
via a hold message or the Hold Data Menu .
Add NOTE−
The ERAM hold message allows automatic calculation
and reporting of aggregate delays.
Add b. Unless otherwise specified in a facility
directive, verbally coordinate non-published
holding instructions when handing off an
aircraft in hold status to another ERAM sector.
Add c. An EFC time entered into the Hold Data
Menu, Hold View, or the hold message
constitutes coordination of the EFC between
ERAM sectors.
Add REFERENCE −
FAAO JO 7210.3, Para 8-2-9, ERAM Hold Information Facility
Directive Requirements
12/10/15 JO 7110.65W
Briefing Guide BG−17OLD NEW
Add 5-14-10. ERAM VISUAL INDICATOR OF
SPECIAL ACTIVITY AIRSPACE (SAA)
STATUS
Add Sector controllers shall ensure the situation
display accurately reflects the status of all SAAs
that impact their area of control responsibility.
When “SAA DOWN” is displayed in the Outage
View, manually create visual indicators on the
situation display to reflect changes to airspace
status.
Add NOTE−
The “SAA DOWN” message in the Outage View means
that SAA status is no longer being updated. The status
of each SAA at the time of the failure, whether “on” or
“off”, will continue to be displayed. Status changes will
not be automatically updated on the display until the
outage is resolved.
OLD NEW
10-2-5. EMERGENCY SITUATIONS 10-2-5. EMERGENCY SITUATIONS
Title through e No Change
NOTE−
EN ROUTE. During Stage A operation, Code 7700
causes EMRG to blink in field E of the data block.NOTE−
EN ROUTE. ERAM: Code 7700 causes an emergency
indicator to blink in the data block.
OLD NEW
11-1-2. DUTIES AND RESPONSIBILITIES 11-1-2. DUTIES AND RESPONSIBILITIES
Title through a3 No Change
4. Where authorized, perform URET data entries
to keep the activation status of designated URET
Airspace Configuration Elements current.4. Where authorized, perform EDST data entries
to keep the activation status of designated EDST
Airspace Configuration Elements current.
5. Perform assigned actions in the event of a
URET outage or degradation, in accordance with
the requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.5. Perform assigned actions in the event of an
EDST outage or degradation, in accordance with
the requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.
a6 through b4 No Change
5. Where authorized, perform URET
data entries
to keep the activation status of designated URET
Airspace Configuration Elements current.5. Where authorized, perform data entries to keep
the activation status of designated EDST Airspace
Configuration Elements current.
6. Perform assigned actions in the event of a
URET outage or degradation, in accordance with
the requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.6. Perform assigned actions in the event of an
EDST outage or degradation, in accordance with
the requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.
b7 through c3 No Change
12/10/15 JO 7110.65W
Briefing Guide BG−184. Where authorized, perform URET data entries
to keep the activation status of designated URET
Airspace Configuration Elements current.4. Where authorized, perform data entries to keep
the activation status of designated EDST Airspace
Configuration Elements current.
5. Perform assigned actions in the event of a
URET outage or degradation, in accordance with
the requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.5. Perform assigned actions in the event of an
EDST outage or degradation, in accordance with
the requirements of FAA Order 7210.3, FacilityOperation and Administration, and as designated by
facility directive.
OLD
NEW
CHAPTER 13. DECISION SUPPORT TOOLS No Change
Section 1. User Request Evaluation Tool (URET) Section 1. ERAM Decision Support Tools
(EDST)
13-1-1. DESCRIPTION 13-1-1. DESCRIPTION
URET is an en route decision support tool that is
used by the sector team in performing its strategic
planning responsibilities. URET uses flight plan
data, forecast winds, aircraft performance
characteristics, and track data to derive expectedaircraft trajectories, and to predict conflicts
between aircraft and between aircraft and special
use or designated airspace. It also provides trial
planning and enhanced flight data management
capabilities.EDST
is used by the sector team in performing its
strategic planning responsibilities. EDST uses
flight plan data, forecast winds, aircraft
performance characteristics, and track data to
derive expected aircraft trajectories, and to predictconflicts between aircraft and between aircraft and
special use or designated airspace. It also provides
trial planning and enhanced flight data management
capabilities. Under ERAM, the EDST
capabilities constitute the initial En Route
decision support tools.
OLD NEW
13-1-2. CONFLICT DETECTION AND
RESOLUTION13-1-2. CONFLICT DETECTION AND
RESOLUTION
a. Actively scan URET information for predicted
aircraft-to-aircraft and aircraft-to-airspace alerts.a. Actively scan EDST information for predicted
aircraft-to-aircraft and aircraft-to-airspace alerts.
b. When a URET alert is displayed, evaluate the
alert and take appropriate action as early as
practical, in accordance with duty priorities.b. When a conflict probe alert is displayed,
evaluate the alert and take appropriate action as
early as practical, in accordance with dutypriorities.
c. Prioritize the evaluation and resolution of
URET
alerts to ensure the safe, expeditious, and
efficient flow of air traffic.c. Prioritize the evaluation and resolution of
conflict probe alerts to ensure the safe, expeditious,
and efficient flow of air traffic.
NOTE−
URET alerts are based on radar separation standards.
Caution should be used when situations include
nonstandard formations.NOTE−
Conflict probe alerts are based on standard radar
separation. Conflict probe does not account for
instances in which greater separation may be needed
(e.g., non-standard formations, A380) or where
reduced separation is permitted (e.g., 3mile airspace).
d. When a URET alert is displayed and when
sector priorities permit, give consideration to the
following in determining a solution:d. When a conflict probe alert is displayed and
when sector priorities permit, give consideration to
the following in determining a solution:
d1 and d2 No Change
12/10/15 JO 7110.65W
Briefing Guide BG−19e. When the URET Stop Probe feature is activated
for an aircraft, C onflict P robe for that aircraft shall
be restarted before transfer of control, unlessotherwise coordinated.e. When the Stop Probe feature is activated for an
aircraft, c
onflict probe for that aircraft shall be
restarted before transfer of control, unlessotherwise coordinated.
NOTE−
The requir ement in paragraph 13-1-2e does not apply to
aircraft entering a non-URET facility.NOTE−
The requir ement in paragraph 13-1-2e does not apply to
aircraft entering a non EDST facility.
OLD NEW
13-1-3. TRIAL PLANNING 13-1-3. TRIAL PLANNING
When URET is operational at the sector and when
sector priorities permit, use the trial plan capability
to evaluate:When EDST is operational at the sector and when
sector priorities permit, use the trial plan capability
to evaluate:
OLD NEW
13-1-4. URET -BASED CLEARANCES 13-1-4. CONFLICT PROBE -BASED
CLEARANCES
When the results of a trial plan based upon a user
request indicate the absence of alerts, every effort
should be made to grant the user request, unless the
change is likely to adversely affect operations at
another sector.No Change
OLD NEW
13-1-5. THE AIRCRAFT LIST (ACL),
DEPARTURE LIST (DL), AND FLIGHT
DATA MANAGEMENT13-1-5. THE AIRCRAFT LIST (ACL),
DEPARTURE LIST (DL), AND FLIGHT
DATA MANAGEMENT
Title through a No Change
b. Actively scan URET to identify automated
notifications that require sector team action.b. Actively scan EDST to identify automated
notifications that require sector team action.
c through e No Change
f. When URET is operational, s ector teams shall
post flight progress strips for any non-radar flights.f. Sector teams shall post flight progress strips for
any non-radar flights.
g. When URET is operational, a flight progress
strip shall be posted for any flight plan not
contained in the Host Computer System .g. A flight progress strip shall be posted for any
flight plan not contained in the EAS .
h. When URET is operational, s ector teams shall
post any flight progress strip(s) that are deemed
necessary for safe or efficient operations. Thesector team shall comply with all applicable facility
directives to maintain posted flight progress strips.h. S
ector teams shall post any flight progress
strip(s) that are deemed necessary for safe or
efficient operations. The sector team shall complywith all applicable facility directives to maintain
posted flight progress strips.
i. The URET
Drop Track Delete option shall be
used in accordance with facility directives.i. The Drop Track Delete option shall be used in
accordance with facility directives.
12/10/15 JO 7110.65W
Briefing Guide BG−20OLD NEW
13-1-6. MANUAL COORDINATION AND
THE URET COORDINATION MENU13-1-6. MANUAL COORDINATION AND
THE COORDINATION MENU
a. Where automated coordination with a facility is
not available (e.g., an international facility, a VFR
tower), use the URET Coordination Menu or a
flight progress strip to annotate manual
coordination status, in accordance with facility
directives.a. Where automated coordination with a facility is
not available (e.g., an international facility, a VFR
tower), use the Coordination Menu or a flightprogress strip to annotate manual coordination
status, in accordance with facility directives.
b. When the URET
Coordination Menu is used
and the flight plan is subsequently changed, remove
the yellow coding from the Coordination Indicatorafter any appropriate action has been taken.b. When the Coordination Menu is used and the
flight plan is subsequently changed, remove the
yellow coding from the Coordination Indicatorafter any appropriate action has been taken.
OLD
NEW
13-1-7. HOLDING 13-1-7. HOLDING
For flights in hold, use URET Hold Annotations,
Hold D ata Menu, Hold View, a flight progress strip,
or a facility approved worksheet to annotate holding
instructions, in accordance with facility directives.For flights in hold, use the ERAM Hold Data
Menu/Hold View, the EDST Hold Annotations
Menu, a flight progress strip, or a facility approved
worksheet, to annotate holding instructions, in
accordance with facility directives.
OLD NEW
13-1-8. RECORDING OF CONTROL DATA 13-1-8. RECORDING OF CONTROL DATA
a and b No Change
c. When the URET Free Text Area is used to enter
control information, authorized abbreviations shall
be used. You may use:c. When the ACL or DL Free T ext Area is used to
enter control information, authorized abbreviations
must be used. You may use:
c1 and c2 No Change
3. The URET equivalents for control
information symbols authorized in TBL 13-1-3.3. The EDST equivalents for control
information symbols authorized in TBL 13-1-3.
c4 and c5 No Change
d. When the URET Free T ext Area is used to enter
control information, the Free Text Area shall
remain open and visible. When no longer relevant,the information entered into the Free Text Area
shall be updated or deleted.d. When the ACL or DL
Free Text Area is used
to enter control information, the Free Text Area
must remain open and visible. When no longerrelevant, the information entered into the Free Text
Area must be updated or deleted.
e through TBL 13-1-2 No Change
TBL 13-1-3
URET Equivalents for Control Information
SymbolsTBL 13-1-3
EDST Equivalents for Control Information
Symbols
12/10/15 JO 7110.65W
Briefing Guide BG−21OLD NEW
13-1-9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION13-1-9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION
a. The URET Inappropriate Altitude for Direction
of Flight (IAFDOF) feature shall be used in the
automatic mode (i.e., IAF DOF Manual shall remain
deselected) unless otherwise authorized in a facility
directive.a. The EDST Inappropriate Altitude for Direction
of Flight (IAFDOF) feature must be used in the
automatic mode (i.e., IAFDOF Manual must
remain deselected) unless otherwise authorized in
a facility directive.
b. Completion of any required coordination for
IAFDOF shall be acknowledged on the ACL by
removing the IAFDOF coding.b. Completion of any required coordination for
IAFDOF must be acknowledged on the ACL by
removing the IAFDOF coding.
c. Completion of appropriate coordination for an
Unsuccessful Transmission Message (UTM) shall
be acknowledged on the ACL by removing the
UTM coding.c. Completion of appropriate coordination for an
Unsuccessful Transmission Message (UTM) must
be acknowledged on the ACL by removing the
UTM coding.
d. Issuance of the Expect Departure Clearance
Time (EDCT) to the pilot or other control facility
shall be acknowledged on the DL by removing the
EDCT coding.d. Issuance of the Expect Departure Clearance
Time (EDCT) to the pilot or other control facility
must be acknowledged on the DL by removing the
EDCT coding.
e. IAFDOF, UTM, or EDCT coding shall be
acknowledged only after the appropriate action has
been completed.e. IAFDOF, UTM, or EDCT coding must be
acknowledged only after the appropriate action has
been completed.
OLD NEW
13-1-10. CURRENCY OF TRAJECTORY
INFORMATION13-1-10. CURRENCY OF TRAJECTORY
INFORMATION
Title through b No Change
NOTE−
URET accuracy in assigning alert notification is
dependent upon entry/update of a flight’ s interim
altitude.NOTE−
Conflict probe accuracy in assigning alert notification is
dependent upon entry/update of a flight’ s interim
altitude.
OLD NEW
13-1-11. DELAY REPORTING 13-1-11. DELAY REPORTING
a. Adhere to all applicable delay reporting
directives while URET is operational.a. Adhere to all applicable delay reporting
directives.
b. Delay information shall be recorded. Delay
information may be automatically recorded via use
of the URET Hold Annotations Menu, or manually
on flight progress strips or facility-approved
worksheets, in accordance with the facility-defined
standard.b. Delay information shall be recorded. Delay
information may be automatically recorded via use
of the EDST Hold Annotations Menu , ERAM
Hold Data Menu, ERAM Hold View , or manually
on flight progress strips or facility-approved
worksheets, in accordance with the facility-defined
standard.
12/10/15 JO 7110.65W
Briefing Guide BG−22c. When using URET to automatically record
delay information, the URET hold annotations shall
be deleted when the aircraft is cleared from holding.c. When using the Hold Annotation Menu to
automatically record delay information, the hold
annotations shall be deleted when the aircraft iscleared from holding.
NOTE−
Delay information cannot be accurately r ecorded unless
URET annotations are deleted when the aircraft is
cleared from holding.NOTE−
When using EDST hold annotations, d elay information
cannot be accurately r ecorded unless the annotations are
deleted when the aircraft is cleared from holding. When
using the ERAM Hold Data Menu or Hold View , delays
are automatically recorded when the aircraft is cleared
out of hold .
OLD NEW
13-1-12. OVERDUE AIRCRAFT 13-1-12. OVERDUE AIRCRAFT
Upon receipt of the URET overdue aircraft
notification take appropriate actions set forth in
Chapter 10, Section 3, Overdue aircraft.Upon receipt of the overdue aircraft notification
take appropriate actions set forth in Chapter 10,
Section 3, Overdue aircraft.
NOTE−
URET overdue aircraft notification is based on radar
track data. Updating an aircraft’ s route of fight will
remove the overdue aircraft notification.NOTE−
EDST overdue aircraft notification is based on radar
track data. Updating an aircraft’ s route of fight will
remove the overdue aircraft notification.
OLD NEW
13-1-14. FORECAST WINDS 13-1-14. FORECAST WINDS
In the event that current forecast wind data are not
available, continue use of with appropriate
recognition that alert and trajectory data may be
affected.In the event that current forecast wind data are not
available, continue use of conflict probe and trial
planning with appropriate recognition that alert
and trajectory data may be affected.
OLD NEW
13-1-15. INTERFACILITY CONNECTIVITY 13-1-15. INTERFACILITY CONNECTIVITY
In the event of a loss of connectivity to a
neighboring URET system , continue use of URET
with appropriate recognition that alert data may be
affected.In the event of a loss of connectivity to an adjacent
ERAM facility , continue use of EDST with
appropriate recognition that alert data may be
affected.
OLD NEW
13-1-16. PRIMARY HOST OUTAGES 13-1-16. SURVEILLANCE AND FLIGHT
DATA OUTAGES
In the event of a primary HOST outage, URET data
may be used to support situational awareness while
the facility transitions to the backup RDP
capabilities or non radar procedures.In the event of a surveillance or flight data outage,
electronic flight data may be used to support
situational awareness while the facility transitions
to alternate automation capabilities or non radar
procedures.
NOTE−
Without primary system input, URET data cannot be
updated and becomes stale.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−23OLD NEW
13-1-17. URET AIRSPACE
CONFIGURATION ELEMENTS13-1-17. AIRSPACE CONFIGURATION
ELEMENTS
a. URET Airspace Configuration Elements are: a. Airspace Configuration Elements are:
a1 through a2 No Change
3. URET a dapted restrictions. 3. Adapted restrictions.
b. Where assigned as a sector responsibility by
facility directive, the sector team shall update
URET Airspace Configuration Elements to reflect
current status.b. Where assigned as a sector responsibility by
facility directive, the sector team shall update
Airspace Configuration Elements to reflect current
status.
Add NOTE−
Unless otherwise covered in an LOA or facility
directive, activating or scheduling the SAA in the
Airspace Status V iew does NOT constitute coordination
for activation of airspace .
c. For Airspace Configuration Elements
designated as a sector responsibility, notify the
operational supervisor when the status of anAirspace Configuration Element has been modified
in URET
.c. For Airspace Configuration Elements
designated as a sector responsibility, notify the
operational supervisor when the status of anAirspace Configuration Element has been
modified.
1. PARAGRAPH NUMBER AND TITLE:
1-2-6. ABBREVIATIONS2-1-6. SAFETY ALERTS5-2-13. CODE MONITOR5-2-17. V ALIDATION OF MODE C
5-4-6. RECEIVING CONTROLLER HANDOFF
5-5-2. TARGET SEPARATION 5-5-4. MINIMA5-15-1. APPLICATION
Chapter 5, Section 16. TPX-42
7-6-1. BASIC RADAR SERVICE TO VFR AIRCRAFT 7-7-3. SEPARATION 7-8-3. SEPARATION
7-9-4. SEPARATION
2. BACKGROUND: Terminal areas use mono-pulse secondary surveillance radar (ASR 9, Mode S and
ASR-11 Beacon System). FUSION utilizes all available surveillance sources (airport surveillance radar (ASR),
air route surveillance radar (ARSR), ADS-B, etc.) to display a single tracked target for air traffic controlseparation services. FUSION performance characteristics is equivalent to the current single-sensor radar display
system. The performance of this system will be used as the baseline radar system to ensure minimal degradation
of current separation operations within the NAS. The Surveillance and Broadcast Services Air Traffic CHIWorkgroup was established to ensure functional standardization and usability of multiple surveillance sourcesintegration in both terminal and en route domains. A recently signed Safety Risk Management Document(SRMD) addendum supports and authorizes 3NM ADS-B to ADS-B and ADS-B to Radar separation when
operating in Fusion mode. Facilities may determine the necessity of the use of ADS-B CHI in airspace where the
only surveillance source is being provided by ADS-B based upon the number of equipped aircraft and affected
operations.
12/10/15 JO 7110.65W
Briefing Guide BG−243. CHANGE:
OLD NEW
1−2−6. ABBREVIATIONS 1 −2−6. ABBREVIA TIONS
Programmable Indicator Data Processor (PIDP) Delete
OLD NEW
2-1-6. SAFETY ALERTS 2-1-6. SAFETY ALERTS
Title through NOTE 1 No Change
2. Recognition of situations of unsafe proximity may
result from MSAW/E −MSAW/LAAS , automatic altitude
readouts, Conflict/Mode C Intruder Alert, observations
on a P AR scope, or pilot reports.2. Recognition of situations of unsafe proximity may
result from MSAW/E −MSAW, automatic altitude
readouts, Conflict/Mode C Intruder Alert, observations
on a P AR scope, or pilot reports.
OLD NEW
5-2-13. CODE MONITOR 5-2-13. CODE MONITOR
Title through REFERENCE No Change
NOTE−
In addition to alphanumeric and control symbology
processing enhancements, the MEARTS, STARS, and the
TPX−42 systems are equipped with automatic beacon
decoders. Therefore, in facilities where the automaticbeacon decoders are providing the control slash video,
there is no requirement to have the nonautomated
decoding equipment operating simultaneously.NOTE−
In addition to alphanumeric and control symbology
processing enhancements, the MEARTS and
STARS
systems are equipped with automatic beacon decoders.Therefore, in facilities where the automatic beacondecoders are pr oviding the control slash video, there is no
requirement to have the non −
automated decoding
equipment operating simultaneously.
OLD NEW
5-2-17. V ALIDATION OF MODE C
READOUT5-2-17. V ALIDATION OF MODE C
READOUT
Ensure that Mode C altitude readouts are valid after
accepting an interfacility handoff, initial track start,
track start from coast/suspend tabular list, missing,
or unreasonable Mode C readouts. For TPX -42 and
equivalent systems ensure that altitude readout is
valid immediately after identification.
(TCDD-/BANS- equipped tower cabs are not
required to validate Mode C readouts afterreceiving interfacility handoffs from TRACONs
according to the procedures in p
ara 5-4-3, Methods,
subpara a4.)Ensure that Mode C altitude readouts are valid after
accepting an interfacility handoff, initial track start,
track start from coast/suspend tabular list, missing,
or unreasonable Mode C readouts. When an X is
displayed adjacent to the Mode C, the Mode C
altitude readout must be validated after the X is
no longer displayed in the data block. (CTRD
equipped tower cabs are not required to validate
Mode C readouts after receiving interfacility
handoffs from TRACONs according to the
procedures in Para 5-4-3, Methods, subpara a4.)
OLD NEW
5-4-6. RECEIVING CONTROLLER
HANDOFF5-4-6. RECEIVING CONTROLLER
HANDOFF
Title through f No Change
1. When an automated interfacility handoff
action is initiated and “AMB” or “AM” is displayed
in the full data block, advise the other facility thata disparity exists between the position declared by
their computer and that declared by your
ARTS/PIDP/STARS
system.1. When an automated interfacility handoff
action is initiated and “AMB” or “AM” is displayed
in the full data block, advise the other facility thata disparity exists between the position declared by
their computer and that declared by your system.
12/10/15 JO 7110.65W
Briefing Guide BG−25OLD NEW
5-5-2. TARGET SEPARATION 5-5-2. TARGET SEPARATION
a. Apply radar separation: Apply radar separation:
1. Between the centers of primary radar targets;
however, do not allow a primary target to touch
another primary target or a beacon control slash.a. Between the centers of primary radar targets;
however, do not allow a primary target to touch
another primary target or a beacon control slash.
2. Between the ends of beacon control slashes. b. Between the ends of beacon control slashes.
NOTE−
At TPX−42 sites, the bracket video feature must be
activated to display the beacon control slash.Delete
3. Between the end of a beacon control slash and
the center of a primary target.c. Between the end of a beacon control slash and
the center of a primary target.
4. All−digital displays. Between the centers of
digitized targets. Do not allow digitized targets to
touch.d. All−digital displays. Between the centers of
digitized targets. Do not allow digitized targets to
touch.
REFERENCE −
FAAO JO 7110.65, Para 5 −9−7, Simultaneous Independent ILS/MLS
Appr oaches− Dual & Triple.REFERENCE −
F AAO JO 7110.65, Para 5 −9−7, Simultaneous Independent
Appr oaches− Dual & Triple.
OLD NEW
5-5-4. MINIMA 5-5-4. MINIMA
Title through b2 No Change
Add NOTE−
In the event of an unexpected ISR on one or more
aircraft, the A TCS working that aircraft must transition
from 3-mile to 5-mile separation, or establish some
other form of approved separation (visual or vertical) as
soon as feasible. This action must be timely, but taken
in a reasonable fashion, using the controller’s best
judgment, as not to reduce safety or the integrity of the
traffic situation. For example, if ISR appears when an
aircraft is established on final with another aircraft on
short final, it would be beneficial from a safety
perspective to allow the trailing aircraft to continue the
approach and land rather than terminate a stabilized
approach.
b3 No Change
Add 4. ADS-B may be integrated as an additional
surveillance source when operating in FUSION
mode. The display of ADS-B targets is permitted
and does not require radar reinforcement.
Add NOTE−
ADS-B surveillance must only be used when operating
in FUSION.
12/10/15 JO 7110.65W
Briefing Guide BG−26Add 5. The use of ADS-B only information may be
used to support all radar requirements
associated with any published instrument
procedure that is annotated “Radar Required”.
Add 6. The ADS-B Computer Human Interface
(CHI) may be implemented by facilities on a
sector by sector or facility wide basis when the
determination is made that utilization of the
ADS-B CHI provides an operational advantage
to the controller.
OLD NEW
Section 15. Automated Radar Terminal
Systems (ARTS) − TerminalSection 15. Common Automated Radar
Terminal Systems (C ARTS) & Standard
Terminal Automation Replacement System
(STARS) − Terminal
OLD NEW
5-15-1. APPLICATION 5-15-1. APPLICATION
ARTS/STARS may be used for identifying aircraft
assigned a discrete beacon code, maintaining
identity of tar gets, and performing handof fs of these
targets between controllers.CARTS/STARS may be used for identifying
aircraft assigned a discrete beacon code, maintain-
ing identity of targets, and performing handoffs of
these targets between controllers. All procedures
for the terminal domain related to air traffic
control services using CARTS or STARS apply
to the FUSION target.
NOTE−
USAF/USN. Where PIDP/DAIR equipment is capable of
performing the functions described in this section, it may
be used accordingly.Delete
OLD NEW
Section 16. TPX-42− Terminal Delete
5-16−1. APPLICATION Delete
Each TPX −42 facility shall utilize the equipment to
the maximum extent possible consistent with local
operating conditions.Delete
5-16-2. RESPONSIBILITY Delete
This equipment does not relieve the controller of the
responsibility to ensure proper identification,
maintenance of identity, handoff of the correct radar
beacon tar get associated with numeric data, and the
separation of aircraft.Delete
5-16-3. FUNCTIONAL USE Delete
TPX− 42 may be used for the following functions: Delete
a. Tagging. Delete
b. Altitude information. Delete
REFERENCE −
F AAO JO 7110.65, Para 5 −2−23, Altitude Filters.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−27c. Coordination. Delete
d. Target identity confirmation. Delete
5−16−4. SYSTEM REQUIREMENTS Delete
Use the TPX −42 system as follows: Delete
a. TPX−42 facilities must inform adjacent
facilities of scheduled and unscheduled shutdowns.Delete
b. To the maximum extent practicable, tags should
be utilized for all controlled aircraft.Delete
5−16−5. INFORMATION DEISPLAYED Delete
a. Inhibiting portions of the tag must be in
accordance with facility directives, which must
ensure maximum required use of the equipment.Delete
b. Mode C altitude information must not be
inhibited unless a ground malfunction causes
repeated discrepancies of 300 feet or more between
the automatic altitude readouts and pilot reported
altitudes.Delete
5−16−6. INHIBITING LOW ALTITUDE
ALERT SYSTEM (LAAS)Delete
Assign a beacon code to a VFR aircraft or to an
aircraft that has canceled its IFR flight plan to
inhibit LAAS processing unless the aircraft has
specifically requested LAAS.Delete
OLD NEW
7-6-1. BASIC RADAR SERVICE TO VFR
AIRCRAFT-TERMINAL7-6-1. BASIC RADAR SERVICE TO VFR
AIRCRAFT-TERMINAL
Title through b REFERENCE No Change
c. When ISR is being displayed, target resolution
is prohibited.Delete
OLD NEW
7−7−3. SEPARATION 7 −7−3. SEPARATION
Title through b No Change
c. Target resolution. c. Target resolution , except when ISR is being
displayed.
NOTE−
1. When ISR is being displayed, target resolution is
prohibited.
2. Apply the provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g, when wake turbulenceseparation is required.NOTE−
Apply the provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g, when wake turbulence
separation is required.
12/10/15 JO 7110.65W
Briefing Guide BG−28OLD NEW
7−8−3. SEPARATION 7 −8−3. SEPARATION
Title through b No Change
c. Target resolution. c. Target resolution , except when ISR is being
displayed.
NOTE−
1. When ISR is being displayed, target resolution is
prohibited.
2. Apply the provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g, when wake turbulenceseparation
is required.NOTE−
Apply the provisions of Paragraph 5-5-4, Minima,
subparagraphs f and g, when wake turbulence
separation is required.
OLD NEW
7-9-4. SEPARATION 7-9-4. SEPARATION
Title through b1 No Change
Add NOTE−
When ISR is being displayed, discontinue 1 1/2−NM
separation.
b2 through d No Change
1. Target resolution, or 1. Target resolution, except when ISR is being
displayed, or
NOTE−
When ISR is being displayed, target resolution is
prohibited .Delete
1. PARAGRAPH NUMBER AND TITLE:
1−2−6. ABBREVIA TIONS
8−1−7. OCEANIC NA VIGATIONAL ERROR REPORTING (ONER) PROCEDURES
2. BACKGROUND: FAA JO 7110.65, Para 8-1-7, requires facilities to refer to FAAO 7110.82 for procedures
on how to process Oceanic Navigational Error (ONER) Reports. FAAO 7110.82 was effective June 3, 2009, and
replaced the terminology ONER with Oceanic Error Report.
3. CHANGE:
OLD NEW
1−2−6. ABBREVIA TIONS 1 −2−6. ABBREVIA TIONS
Oceanic Navigational Error Report (ONER) Delete
12/10/15 JO 7110.65W
Briefing Guide BG−29OLD NEW
8−1−7. OCEANIC NA VIGATIONAL ERROR
REPORTING (ONER) PROCEDURES8−1−7. OCEANIC ERROR REPORT
PROCEDURES
FAAO 7110.82, Monitoring of Navigation,
Longitudinal Separation, and Altitude Keeping
Performance in Oceanic Airspace, contains
procedures for reporting and processing
navigational errors observed by ATC radar for
aircraft exiting oceanic airspace.FAAO 7110.82 establishes procedures for
reporting Gross Navigation Errors (GNE),
height errors, time(longitudinal) errors,
intervention, and Special Area of Operations
(SAO) verification in oceanic airspace. This data
is needed for risk modeling activities to support
separation standard reductions.
NOTE−
F AAO 7110.82 establishes procedures for processing
ONER procedures, Oceanic Altitude Deviation Reports,
Erosion of Longitudinal Separation Reports, Letter of
Authorization Verification Reports, and for collecting
system data for analysis. This data is needed for risk
modeling activities to support separation standard
reductions.Delete
1. PARAGRAPH NUMBER AND TITLE: 2−1−6. SAFETY ALERT
2. BACKGROUND: The original phraseology for Safety Alert in the 7110.65A, paragraph 33 read: “(Ident)
Traffic alert, advise you turn right/left heading (degrees) and /or climb/descend to (altitude) immediately”.Paragraph 33, was later changed to 2-1-6, and then modified in FAA JO 7110.65M on 2/2/00, to incorporate“traffic alert” at the beginning of the transmission. The phraseology instructs controllers to give the position ofthe aircraft, while the example omits the position information. A number of controllers are not discerning the
difference between the phraseology and example in paragraph 2-1-6b.
3. CHANGE:
OLD
NEW
2−1−6. SAFETY ALERT 2 −1−6. SAFETY ALERT
Title through b PHRASEOLOGY No Change
EXAMPLE −
“Traffic Alert, Cessna Three Four Juliet, advise you
turn left immediately.”
or“Traffic Alert, Cessna Three-Four Juliet, advise youturn left and climb immediately.”EXAMPLE −
“Traffic Alert, Cessna Three Four Juliet, 12’o clock, 1
mile advise you turn left immediately.”
or“Traffic Alert, Cessna Three-Four Juliet, 12’o clock, 1
mile advise you turn left and climb immediately.”
REFERENCE −
REFERENCE −
F AAO JO 7110.65, Para 5 −14−1, Conflict Alert (CA) and Mode C
Intruder (MCI) Alert.
F AAO JO 7110.65, Para 5 −14−2, En Route Minimum Safe Altitude
Warning (E −MSAW).
F AAO JO 7110.65, Para 5 −15−6, CA/MCI.
F AAO JO 7110.65, Para 5 −2−23, Altitude Filters.REFERENCE −
F AAO JO 7110.65, Para 5 −14−1, Conflict Alert (CA) and Mode C
Intruder (MCI) Alert.F AAO JO 7110.65, Para 5 −14−2, En Route Minimum Safe Altitude
Warning (E −MSAW).
F AAO JO 7110.65, Para 5 −15−6, CA/MCI.
F AAO JO 7110.65, Para 5 −2−23, Altitude Filters.
FAAO JO 7110.65, Para 2-1-21, Traffic Advisories
12/10/15 JO 7110.65W
Briefing Guide BG−301. PARAGRAPH NUMBER AND TITLE:
2-1-19. WAKE TURBULENCE
2-1-20. WAKE TURBULENCE CAUTIONARY ADVISORIES2-4-14. WORDS AND PHRASES2-4-21. DESCRIPTION OF AIRCRAFT TYPES
3-3-5. BRAKING ACTION ADVISORIES
3-7-3. GROUND OPERATIONS3-10-10. ALTITUDE RESTRICTED LOW APPROACH4-8-11. PRACTICE APPROACHES
5-5-7. PASSING OR DIVERGING
7-2-1. VISUAL SEPARATION
2. BACKGROUND: In 2008, the FAA European Organization for the Safety of Air Navigation
(EuroControl), the Joint Aviation Authorities, and the aircraft manufacturer modified existing separation
standards for the Airbus A380-800 (A388) aircraft. The separation standards apply to terminal and enroutefacilities. Although a “J” indicator for the A388 has been identified by ICAO in its October 9, 2006, guidance, the
FAA has not rendered a final determination in support of such an indicator. Accordingly, existing flight data
processing systems and records have not yet been modified to reflect a “J” indicator for the A388 on electronic
flight lists or printed flight progress strips. Studies indicate that wake vortices generated by the A388 may bemore substantial than those of aircraft in the “Hea vy” Aircraft Weight Class, thus requiring the special
designation, “Super” and additional wake turbulence separation during certain segments of flight. The A388
must identify itself as, “Super” in radio communications with air traffic control. Recent analysis of the current
U.S. weight-based wake turbulence categories and associated separation minima has indicated that the Antonov
An225 is more appropriately aligned with the A388 than as a U.S. heavy aircraft.
3. CHANGE:
OLD
NEW
2−1−19. W AKE TURBULENCE 2−1−19. W AKE TURBULENCE
a. Apply wake turbulence procedures to aircraft
operating behind heavy jets/B757s and, where
indicated, to small aircraft behind large aircraft.a. Apply wake turbulence procedures to an
aircraft operating behind another aircraft when
wake turbulence separation is required.
NOTE−
Para 5−5−4, Minima, specifies increased radar separa-
tion for small type aircraft landing behind large, heavy,
or B757 aircraft because of the possible effects of wake
turbulence.NOTE−
Para 5−5−4, Minima, subparagraphs g and h specify
the required radar wake turbulence separations.
Time-based separations are contained in Para 3-9-6,
Same Runway Separation, Para 3-9-7, Wake
Turbulence Separation for Intersection Departures,
Para 3-9-8, Intersecting Runway Separation, Para
3-9-9, Nonintersecting Converging Runway
Operations, Para 3-10-3, Same Runway Separation,
Para 3-10-4, Intersecting Runway Separation, Para
6-1-4, Adjacent Airport Operation, Para 6-1-5, Arrival
Minima, and Para 6-7-5, Interval Minima.
OLD NEW
2−1−20. W AKE TURBULENCE
CAUTIONARY ADVISORIES2−1−20. W AKE TURBULENCE
CAUTIONARY ADVISORIES
a. Issue wake turbulence cautionary advisories ,
including the position, altitude if known, and
direction of flight to aircraft operating behindHeavy or B757
aircraft to :a. Issue wake turbulence cautionary advisories
including the position, altitude if known, and
direction of flight to aircraft operating behind an
aircraft that requires wake turbulence
separation when :
12/10/15 JO 7110.65W
Briefing Guide BG−31REFERENCE −
AC 90-23, Aircraft Wake Turbulence, Pilot Responsibility, Para 12 .REFERENCE −
AC 90−23, Air craft Wake Turbulence, Pilot Responsibility, Para 11.
FAAO JO 7110.65, Para 5-5-4,Minima, Subparagraph g.
1. TERMINAL. VFR aircraft not being radar
vectored but are behind heavy jets or B757s .1. TERMINAL. VFR aircraft not being radar
vectored are behind the larger aircraft .
2. IFR aircraft that accept a visual approach or
visual separation.2. IFR aircraft accept a visual approach or visual
separation.
REFERENCE − No Change
3. TERMINAL. VFR arriving aircraft that have
previously been radar vectored and the vectoring
has been discontinued.3. TERMINAL. VFR arriving aircraft have
previously been radar vectored and the vectoring
has been discontinued.
b. Issue cautionary information to any aircraft if
in your opinion, wake turbulence may have an
adverse effect on it. When traffic is known to be a
heavy aircraft, include the word heavy in the
description.b. Issue cautionary information to any aircraft if
in your opinion, wake turbulence may have an
adverse effect on it. When traffic is known to be
a super aircraft, include the word super in the
description . When traffic is known to be a heavy
aircraft, include the word heavy in the description.
OLD NEW
2-4-14. WORDS AND PHRASES 2-4-14. WORDS AND PHRASES
Title through a No Change
Add b. The word super must be used as part of the
identification in all communications with or
about super aircraft.
b. The word “heavy” must be used as part of the
identification of heavy jet aircraft as follows:c. The word heavy must be used as part of the
identification in all communications with or
about heavy aircraft .
TERMINAL. In all communications with or about
heavy jet aircraft.Delete
EN ROUTE. The use of the word heavy may be
omitted except as follows:Delete
Add d. EN ROUTE. The use of the words super or
heavy may be omitted except as follows:
1. In communications with a terminal facility
about heavy jet operations.1. In communications with a terminal facility
about super or heavy aircraft operations.
2. In communications with or about heavy jet
aircraft with regard to an airport where the en route
center is providing approach control service.2. In communications with or about super or
heavy aircraft with regard to an airport where the en
route center is providing approach control service.
3. In communications with or about heavy jet
aircraft when the separation from a following
aircraft may become less than 5 miles by approved
procedure.3. In communications with or about super or
heavy aircraft when the separation from a following
aircraft may become less than 5 miles by approved
procedure.
4 through EXAMPLE No Change
12/10/15 JO 7110.65W
Briefing Guide BG−32NOTE−
Most airlines will use the word “heavy” following the
company prefix and flight number when establishing
communications or when changing frequencies within a
terminal facility’ s area.NOTE−
Most airlines will use the word “super” or “heavy”
following the company prefix and flight number when
establishing communications or when changing
frequencies within a terminal facility’ s area.
b5 Renumber to e
OLD NEW
2-4-21. DESCRIPTION OF AIRCRAFT
TYPES2-4-21. DESCRIPTION OF AIRCRAFT
TYPES
Except for heavy aircraft, describe aircraft as
follows when issuing traffic information.Except for super and heavy aircraft, describe
aircraft as follows when issuing traffic information.
a through b No Change
1. Manufacturer’s model or designator 1. Manufacturer’s model or type designator.
b2 through c No Change
1. Manufacturer’s model or designator. 1. Manufacturer’s model or type designator.
c2 through EXAMPLE No Change
Add d. When issuing traffic information to aircraft
following a super air craft, specify the word s uper
before the manufacturer’s name and model.
d. When issuing traffic information to aircraft
following a heavy jet , specify the word “heavy”
before the manufacturer’s name and model.e. When issuing traffic information to aircraft
following a heavy aircraft , specify the word heavy
before the manufacturer’s name and model.
EXAMPLE −
“Heavy L-Ten-Eleven.”
“Heavy C-Five .”
“Heavy Boeing Seven Forty-Seven.”EXAMPLE −
“Super A-Three-Eighty” or “Super
A-three-eighty-eight.”
“Heavy C- Seventeen. ”
“Heavy Boeing Seven Forty-Seven.”
OLD NEW
3-3-5. BRAKING ACTION ADVISORIES 3-3-5. BRAKING ACTION ADVISORIES
Title through b No Change
1. Issue the latest braking action report for the
runway in use to each arriving and departing aircraft
early enough to be of benefit to the pilot. Whenpossible, include reports from heavy jet
aircraft
when the arriving or departing aircraft is a heavy.1. Issue the latest braking action report for the
runway in use to each arriving and departing aircraft
early enough to be of benefit to the pilot. Whenpossible, include reports from super or
heavy
aircraft when the arriving or departing aircraft is a
super or heavy .
OLD NEW
3-7-3. GROUND OPERATIONS 373. GROUND OPERATIONS
Title through a No Change
a. Heavy jet aircraft to use greater than normal
taxiing power.a. Super or heavy aircraft to use greater than
normal taxiing power.
12/10/15 JO 7110.65W
Briefing Guide BG−33OLD NEW
3-10-10. ALTITUDE RESTRICTED LOW
APPROACH3-10-10. ALTITUDE RESTRICTED LOW
APPROACH
A low approach with an altitude restriction of not
less than 500 feet above the airport may be
authorized except over an aircraft in takeoff
position or a departure aircraft. Do not clear aircraft
for restricted altitude low approaches overpersonnel unless airport authorities have advised
these personnel that the approaches will be
conducted. Advise the approaching aircraft of thelocation of applicable ground traffic, personnel, or
equipment.No Change
NOTE−
1. The 500 feet r estriction is a minimum. Higher altitudes
should be used when warranted. For example, 1,000 feet
is more appropriate for heavy aircraft operating overunprotected personnel or small aircraft on or near therunway.NOTE−
1. The 500 feet r estriction is a minimum. Higher altitudes
should be used when warranted. For example, 1,000 feet
is more appropriate for super or
heavy air craft operating
over unprotected personnel or small aircraft on or nearthe runway.
OLD NEW
4-8-11. PRACTICE APPROACHES 4-8-11. PRACTICE APPROACHES
Title through a1(b) No Change
2. Where procedures require application of IFR
separation to VFR aircraft practicing instrument
approaches, standard IFR separation in accordance
with Chapter 3, Chapter 4, Chapter 5, Chapter 6,
and Chapter 7 must be provided. Controller
responsibility for separation begins at the point
where the approach clearance becomes effective.
Except for heavy aircraft/B757 , 500 feet vertical
separation may be applied between VFR aircraft
and between a VFR and an IFR aircraft.2. Where procedures require application of IFR
separation to VFR aircraft practicing instrument
approaches, standard IFR separation in accordance
with Chapter 3, Chapter 4, Chapter 5, Chapter 6,
and Chapter 7 must be provided. Controller
responsibility for separation begins at the point
where the approach clearance becomes effective.
Except for super or heavy aircraft, 500 feet vertical
separation may be applied between VFR aircraft
and between a VFR and an IFR aircraft.
OLD NEW
5-5-7. PASSING OR DIVERGING 5-5-7. PASSING OR DIVERGING
Title through a2(b) No Change
3. Although approved separation may be
discontinued, the requirements of Para 5-5-4,
Minima, subparagraphs f and g apply when
operating behind a heavy jet/B757.3. Although approved separation may be
discontinued, the requirements of Para 5-5-4,
Minima, subparagraph g must be applied when
wake turbulence separation is required.
REFERENCE through b4 No Change
5. You have advised the pilots if either aircraft is
classified as a heavy jet/B757 aircraft.5. You have advised the pilots if either aircraft is
classified as a super or heavy aircraft.
6. Although vertical separation may be
discontinued, the requirements of para 5 −5−4,
Minima, subparas f must be applied when operating
behind a heavy jet/B757.6. Although vertical separation may be
discontinued, the requirements of Para 5−5−4,
Minima, subpara graph g must be applied when
wake turbulence separation is required.
12/10/15 JO 7110.65W
Briefing Guide BG−34OLD NEW
7-2-1. VISUAL SEPARATION 7-2-1. VISUAL SEPARATION
Aircraft may be separated by visual means, as
provided in this paragraph, when other approved
separation is assured before and after the
application of visual separation. To ensure that
other separation will exist, consider aircraftperformance, wake turbulence, closure rate, routes
of flight, and known weather conditions. Reported
weather conditions must allow the aircraft to remain
within sight until other separation exists. Do not
apply visual separation between successive depar-
tures when departure routes and/or aircraftperformance preclude maintaining separation.Aircraft may be separated by visual means, as
provided in this paragraph, when other approved
separation is assured before and after the
application of visual separation. To ensure that
other separation will exist, consider aircraftperformance, wake turbulence, closure rate, routes
of flight, and known weather conditions. Reported
weather conditions must allow the aircraft to remain
within sight until other separation exists. Do not
apply visual separation between successive depar-
tures when departure routes and/or aircraftperformance preclude maintaining separation.
Visual separation is not authorized when the
lead aircraft is a super.
1. PARAGRAPH NUMBER AND TITLE: 2-3-8. AIRCRAFT EQUIPMENT SUFFIX
2. BACKGROUND: When the new aircraft equipment suffix table was introduced in 2013, the automation
was designed to translate the NAS equipment suffix of an aircraft that loses Mode C altitude reporting capabilityto a slant H (/H). The automation would also translate the NAS equipment suffix of an aircraft that loses Mode A
beacon reporting capability (loss of transponder) to a /H. This dual assignment of /H produced numerous
interfacility handoff failures in facilities operating on ERAM involving aircraft that had only lost Mode C altitude
reporting. This situation was caused by ERAM interpreting /H as “No T ransponder”, therefore would not process
the handoff if it determined that the aircraft was transmitting a beacon code.
3. CHANGE:
OLD
NEW
2-3-8. AIRCRAFT EQUIPMENT SUFFIX 2-3-8. AIRCRAFT EQUIPMENT SUFFIX
Title through c EXAMPLE No Change
d. Utilize aircraft equipment suffix /H to indicate
“RVSM−capable, no transponder.”d. Utilize aircraft equipment suffix / O to indicate
“RVSM−capable, no transponder.”
NOTE−
/H is for ATC use only. Users are not authorized to file
this suffixNOTE−
/O is for ATC use only. Users are not authorized to file
this suffix
12/10/15 JO 7110.65W
Briefing Guide BG−351. PARAGRAPH NUMBER AND TITLE:
3-9-6. SAME RUNWAY SEPARATION
3-9-7. WAKE TURBULENCE SEPARATION FOR INTERSECTION DEPARTURES3-9-8. INTERSECTING RUNWAY/INTERSECTING FLIGHT PATH OPERATIONS3-9-9. NONINTERSECTING CONVERGING RUNWAY OPERATIONS
3-10-3. SAME RUNWAY SEPARATION
3-10-4. INTERSECTING RUNWAY/INTERSECTING FLIGHT PATH OPERATIONS5-5-4. MINIMA5-8-3. SUCCESSIVE OR SIMULTANEOUS DEPARTURES
5-8-5. DEPARTURES AND ARRIV ALS ON PARALLEL OR NONINTERSECTING DIVERGING
RUNWAYS6-1-4. ADJACENT AIRPORT OPERATION 6-1-5. ARRIV AL MINIMA6-7-5. ARRIV AL MINIMA
7-4-3. CLEARANCE FOR VISUAL APPROACH
7-4-4. APPROACHES TO MULTIPLE RUNWAYS7-6-7. SEQUENCING
2. BACKGROUND: This change revises wake turbulence separation criteria in two separate areas: Super
aircraft, which consists of the Airbus A380-800 and Antonov A225, and the integration of some of the provisions
contained in FAA Order JO 7110.659B, Wake Turbulence Recategorization.
3. CHANGE:
OLD
NEW
3-9-6. SAME RUNWAY SEPARATION 3-9-6. SAME RUNWAY SEPARATION
Title through
WAKE TURBULENCE APPLICATIONNo Change
c. Do not issue clearances which imply or indicate
approval of rolling takeoffs by heavy jet aircraft
except as provided in p ara 3−1−14, Ground
Operations When V olcanic Ash is Present.c. Do not issue clearances which imply or indicate
approval of rolling takeoffs by super or heavy
aircraft except as provided in Para 3−1−14, Ground
Operations When V olcanic Ash is Present.
d. Do not issue clearances to a small aircraft to line
up and wait on the same runway behind a departing
heavy jet aircraft to apply the necessary intervals.d. Do not issue clearances to a small aircraft to line
up and wait on the same runway behind a departing
super or heavy aircraft to apply the necessary
intervals.
REFERENCE −
AC 90−23, Air craft Wake Turbulence.No Change
e. The minima in p ara 5 54, Minima, may be
applied in lieu of the 2 minute requirement in
subpara f . When para 5 54, Minima, are applied,
ensure that the appropriate radar separation exists at
or prior to the time an aircraft becomes airborne
when taking off behind a heavy jet/B757 .e. The minima in Para 5-5-4, Minima,
subparagraph g , may be applied in lieu of the time
interval requirements in subpara graphs f and g .
When Para 5-5-4, Minima, is applied, ensure that
the appropriate radar separation exists at or prior to
the time an aircraft becomes airborne.
NOTE−
The pilot may request additional separation; i.e., 2
minutes vs. 4 miles , but should make this request before
taxiing on the runway.NOTE−
The pilot may request additional separation, but should
make this request before taxiing on the runway.
f. Separate IFR/VFR aircraft taking off behind a
heavy jet/B757 departure by 2 minutes, when
departing:f. Separate IFR/VFR aircraft taking off from the
same runway or a parallel runway separated by
less than 2,500 feet:
12/10/15 JO 7110.65W
Briefing Guide BG−36NOTE−
Takeoff clearance to the following aircraft should not be
issued until 2 minutes after the heavy jet/B757 begins
takeoff roll.NOTE−
Takeoff clearance to the following aircraft should not be
issued until the time interval has passed after the
preceding aircraft begins takeoff roll.
1. The same runway. (See FIG 3 94). 1. Heavy, large, or small behind super − 3
minutes.
FIG 3-9-4
2 Minute SeparationDelete
2. A parallel runway separated by less than 2,500
feet.2. Heavy, large, or small behind heavy − 2
minutes.
g. Separate an aircraft from a heavy jet/B757
when operating on a runway with a displaced
landing threshold if projected flight paths will
cross− 2 minutes when:g. Separate a small aircraft behind a B757 by 2
minutes when departing the same runway .
1. A departure follows a heavy jet/B757 arrival. Delete
2. An arrival follows a heavy jet/B757 departure. Delete
Add FIG 3-9-4
Same Runway Separation
12/10/15 JO 7110.65W
Briefing Guide BG−37h. Air traffic controllers must not approve pilot
requests to deviate from the required wake
turbulence time interval if the preceding aircraft is
a heavy jet/B757.h. Separate aircraft when operating on a
runway with a displaced landing threshold if
projected flight paths will cross when either a
departure follows an arrival or an arrival
follows a departure by the following minima:
Add 1. Heavy, large, or small behind super − 3
minutes.
Add 2. Heavy, large, or small behind heavy − 2
minutes.
Add 3. Small behind B757 − 2 minutes.
i. Separate a small aircraft behind a large aircraft
that has departed or made a low/missed approach
when utilizing opposite direction takeoffs on the
same runway by 3 minutes unless a pilot has
initiated a request to deviate from the 3 −minute
interval. In the latter case, issue a wake turbulence
advisory before clearing the aircraft for takeoff.
Controllers must not initiate or suggest a waiver of
the 3−minute rule.i. Separate an aircraft behind another aircraft
that has departed or made a low/missed
approach when utilizing opposite direction
takeoffs or landings on the same or parallel
runways separated by less than 2,500 feet by the
following minima:
Add 1. Heavy, large, or small behind super − 4
minutes.
Add 2. Heavy, large, or small behind heavy − 3
minutes
NOTE−
A request for takeoff does not initiate a waiver request.Delete
REFERENCE −
F AAO JO 7110.65, Appendix A, Appendix B, and Appendix C,
Aircraft Information.No Change
j. Separate aircraft behind a heavy jet/B757 that
has departed or made a low/missed approach when
utilizing opposite direction takeoffs or landings on
the same or parallel runways separated by less than
2,500 feet − 3 minutes .j. Separate a small aircraft behind a B757 that
has departed or made a low/missed approach
when utilizing opposite direction takeoffs or
landings on the same runway by − 3 minutes.
k. Inform an aircraft when it is necessary to hold
in order to provide the required 3−minute interval.k. Do not approve pilot r equests to deviate from
the required intervals contained in
subparagraphs f through j.
PHRASEOLOGY −
HOLD FOR WAKE TURBULENCE.No Change
REFERENCE −
FAAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures.No Change
Add l. Separate a small aircraft behind a large
aircraft (except B757) that has departed or made
a low/missed approach when utilizing opposite
direction takeoffs on the same runway by 3
minutes unless a pilot has initiated a request to
deviate from the time interval. In the latter case,
issue a wake turbulence cautionary advisory
before clearing the aircraft for takeoff.
Controllers must not initiate or suggest a waiver
of the time interval.
12/10/15 JO 7110.65W
Briefing Guide BG−38Add NOTE−
A request for takeoff does not initiate a waiver request.
Add m. Inform aircraft when it is necessary to hold
in order to provide the required time interval.
OLD NEW
3−9−7. W AKE TURBULENCE SEPARATION
FOR INTERSECTION DEPARTURES3−9−7. W AKE TURBULENCE SEPARATION
FOR INTERSECTION DEPARTURES
a. Apply the following wake turbulence criteria
for intersection departures:No Change
1. Separate a small aircraft taking off from an
intersection on the same runway (same or opposite
direction takeoff) behind a preceding departing
large aircraft by ensuring that the small aircraft does
not start takeoff roll until at least 3 minutes after the
large aircraft has taken off.1. Separate a small aircraft weighing 12,500 lbs.
or less taking off from an intersection on the same
runway (same or opposite direction takeoff) behind
a departing small aircraft weighing more than
12,500 lbs. by ensuring that the aircraft does not
start takeoff roll until at least 3 minutes after the
preceding aircraft has taken off.
2. Separate any aircraft taking off from an
intersection on the same runway (same or opposite
direction takeoff), parallel runways separated by
less than 2,500 feet, and parallel runways separated
by less than 2,500 feet with runway thresholds
offset by 500 feet or more, by ensuring that the
aircraft does not start takeoff roll until at least 3
minutes after a heavy aircraft/B757 has taken off.2. Separate a small aircraft taking off from an
intersection on the same runway (same or opposite
direction takeoff) behind a departing large
aircraft (except B757) by ensuring that the aircraft
does not start takeoff roll until at least 3 minutes
after the preceding aircraft has taken off.
NOTE−
Parallel runways separated by less than 2,500 feet with
runway thr esholds offset by less than 500 feet must apply
para 3−9−6, Same Runway Separation, subpara f.Delete
3. Separate a small aircraft weighing 12,500 lbs.
or less taking off from an intersection on the same
runway (same or opposite direction takeoff) behind
a preceding small aircraft weighing more than
12,500 lbs. by ensuring the following small aircraft
does not start takeoff roll until at least 3 minutes
after the preceding aircraft has taken off.3. Separate a small aircraft taking off from an
intersection on the same runway (same or opposite
direction takeoff) behind a departing B757 by
ensuring that the aircraft does not start takeoff roll
until at least 3 minutes after the preceding aircraft
has taken off.
4. Inform an aircraft when it is necessary to hold
in order to provide the required 3 −minute interval.4. Separate aircraft departing from an
intersection on the same runway (same or
opposite direction takeoff), parallel runways
separated by less than 2,500 feet, and parallel
runways separated by less than 2,500 feet with
the runway thresholds offset by 500 feet or more,
by ensuring that the aircraft does not start
take-off roll until the following intervals exist
after the preceding aircraft has taken off:
Add NOTE−
Apply Para 3-9-6, Same Runway Separation,
subparagraph f to parallel runways separated by less
than 2,500 feet with runway thresholds offset by less
than 500 feet.
12/10/15 JO 7110.65W
Briefing Guide BG−39Add (a) Heavy, large, or small behind super - 4
minutes.
Add (b) Heavy, large, or small behind heavy - 3
minutes.
Add 5. Inform aircraft when it is necessary to hold
in order to provide the required time interval.
PHRASEOLOGY −
HOLD FOR WAKE TURBULENCE.No Change
NOTE−
Aircraft conducting touch-and-go and stop-and-go
operations are considered to be departing from an
intersection.No Change
REFERENCE −
F AAO JO 7110.65, Para 3 −8−2, Touch−and−Go or Stop −and−Go or
Low Approach.No Change
b. The 3−minute interval is not required when: b. The time interval is not required when:
1. A pilot has initiated a request to deviate from
that interval unless the preceding departing aircraft
is a heavy aircraft/B757.1. A pilot has initiated a request to deviate from
the time interval s contained in subparagraph a1
or a2.
NOTE−
A request for takeoff does not initiate a waiver request;
the request for takeoff must be accomplished by a r equest
to deviate from the 3−minute interval.NOTE−
A request for takeoff does not initiate a waiver request;
the request for takeoff must be accomplished by a r equest
to deviate from the time interval.
b2 No Change
3. Successive touch -and-go and stop -and-go
operations are conducted with a small aircraft
following another small aircraft weighing more
than 12,500 lbs. or a large aircraft in the pattern, or
a small aircraft weighing more than 12,500 lbs. or
a large aircraft departing the same runway, provided
the pilot of the small aircraft is maintaining visual
separation/spacing behind the preceding large
aircraft. Issue a wake turbulence cautionary
advisory and the position of the large aircraft.3. Successive touch-and-go or stop-and-go
operations are conducted with any aircraft
following an aircraft in the pattern that requires
wake turbulence separation, or an aircraft
departing the same runway that requires wake
turbulence separation in accordance with
subparagraphs a1, a2, a3, or a4 (except for super
aircraft), provided the pilot is maintaining visual
separation/spacing behind the preceding aircraft.
Issue a wake turbulence cautionary advisory and the
position of the large r aircraft.
EXAMPLE −
“Caution wake turbulence, DC −9 on base leg.”Delete
Add NOTE−
Not authorized with a Super as the lead or departure
aircraft.
Add REFERENCE −
FAAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
FAAO JO 7110.65, Para 7-2-1, Visual Separation
12/10/15 JO 7110.65W
Briefing Guide BG−404. Successive touch-and-go and stop-and-go
operations are conducted with any aircraft
following a heavy aircraft/B757 in the pattern, or
heavy aircraft/B757 departing the same runway,
provided the pilot of the aircraft is maintaining
visual separation/spacing behind the preceding
heavy aircraft/B757. Issue a wake turbulence
cautionary advisory and the position of the heavy
aircraft/B757.Delete
EXAMPLE −
“Caution wake turbulence, heavy Lockheed C5A
departing runway two three.”Delete
5. If action is initiated to reduce the separation
between successive touch-and-go or stop-and-go
operations, apply 3 minutes separation.4. If action is initiated to reduce the separation
between successive touch-and-go or stop-and-go
operations, apply the appropriate separation
contained in subparagraph a1, a2, a3, or a4.
c through c2 No Change
3. Issue a clearance to permit the trailing aircraft
to deviate from course enough to avoid the flight
path of the preceding large departure when applying
subpara b1 or b2.3. Issue a clearance to permit the trailing aircraft
to deviate from course enough to avoid the flight
path of the preceding aircraft when applying
subpara b1 or b2.
OLD NEW
3-9-8. INTERSECTING RUNWAY/
INTERSECTING FLIGHT PATH
OPERATIONS3-9-8. INTERSECTING RUNWAY/
INTERSECTING FLIGHT PATH
OPERATIONS
Title through
WAKE TURBULENCE APPLICATIONNo Change
3. Separate IFR/VFR aircraft taking off behind
a heavy jet/B757 departure by 2 minutes when
departing:3. Separate IFR/VFR aircraft taking off behind
a departing or landing aircraft on an
intersecting runway if flight paths will cross (see
FIG 3-9-7 and FIG 3-9-8), or an aircraft
departing a parallel runway separated by 2,500
feet or more if projected flights will cross (see
FIG 3-9-9):
NOTE−
Takeoff clearance to the following aircraft should not be
issued until 2 minutes after the heavy jet/B757 begins
takeoff roll.NOTE−
Takeoff clearance to the following aircraft should not be
issued until the appropriate time interval has passed
after the preceding aircraft began takeoff roll .
(a) Intersecting runways if projected flight
paths will cross. (See FIG. 3 −9−7.)(a) Heavy, large, or small behind super − 3
minutes.
12/10/15 JO 7110.65W
Briefing Guide BG−41FIG 3−9−7
Intersecting RunwaysDelete
(b) A parallel runway separated by 2,500 feet
or more if projected flight paths will cross. (See FIG
3-9-8)(b) Heavy, large, or small behind heavy − 2
minutes.
Add (c) Small behind B757 − 2 minutes.
Add FIG 3-9-7
Departure Behind Departure on Intersecting
Runway
12/10/15 JO 7110.65W
Briefing Guide BG−42FIG 3-9-8
Parallel RunwayDelete
Add FIG 3-9-8
Departure Behind Arrival on Intersecting Runway
FIG 3-9-9
Departure on Intersecting RunwayDelete
12/10/15 JO 7110.65W
Briefing Guide BG−43Add FIG 3-9-9
Parallel Runway
4. Separate IFR/VFR aircraft departing behind a
landing heavy jet/B757 on a crossing runway if the
departure will fly through the airborne path of the
arrival – 2 minutes. (See FIG 3-9-9)4. Pilot requests to deviate from the required
time intervals must not be approved if the
preceding aircraft requires wake turbulence
separation.
Add REFERENCE −
FAAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
5. Air traffic controllers must not approve pilot
requests to deviate from the required wake
turbulence time interval if the preceding aircraft is
a heavy jet/B757.Delete
REFERENCE −
F AAO JO 7110.65, Para 5 −8−3, Successive or Simultaneous
Departures.
F AAO JO 7110.65, Para 5 −8−5, Departures and Arrivals on Parallel
or Nonintersecting Diverging Runways.Delete
OLD NEW
3-9-9. NONINTERSECTING CONVERGING
RUNWAY OPERATIONS3-9-9. NONINTERSECTING CONVERGING
RUNWAY OPERATIONS
Title through WAKE TURBULENCE
APPLICATIONNo Change
b. Separate IFR/VFR aircraft taking off behind a
heavy jet/B757 departure by 2 minutes when
departing a crossing runway if projected flight paths
will cross. (See FIG 3-9-13).b. Separate IFR/VFR aircraft taking off behind a
departing aircraft on a crossing runway if
projected flight paths will cross (See FIG 3-9-13):
Add 1. Heavy, large, or small behind super − 3
minutes.
Add 2. Heavy, large, or small behind heavy − 2
minutes.
Add 3. Small behind B757 − 2 minutes.
12/10/15 JO 7110.65W
Briefing Guide BG−44FIG 3-9-13
Intersecting Runway SeparationDelete
Add FIG 3-9-13
Intersecting Runway Separation
NOTE−
Takeoff clearance to the following aircraft should not be
issued until 2 minutes after the heavy jet/B757 begins
takeoff roll.NOTE−
Takeoff clearance to the following aircraft should not be
issued until the time interval has passed from when the
preceding aircraft began takeoff roll.
c. Separate IFR/VFR aircraft departing behind a
landing heavy jet/B757 on a crossing runway if the
departure will fly through the airborne path of thearrival-
2 minutes. (See FIG 3-9-14).c. Separate IFR/VFR aircraft departing behind a
landing aircraft on a crossing runway if the
departure will fly through the airborne path of thearrival (See FIG 3-9-14) :
Add 1. Heavy, large, or small behind super − 3
minutes.
Add 2. Heavy, large, or small behind heavy − 2
minutes.
Add 3. Small behind B757 − 2 minutes.
12/10/15 JO 7110.65W
Briefing Guide BG−45FIG 3-9-14
Intersecting Runway SeparationDelete
Add FIG 3-9-14
Intersecting Runway Separation
d. Air traffic controllers must not approve pilot
requests to deviate from the required wake
turbulence time interval if the preceding aircraft is
a heavy jet/B757.d. Do not approve pilot requests to deviate from
the required time interval if the preceding aircraft
requires wake turbulence separation.
REFERENCE −
F AAO JO 7110.65, Para 5-8-3, Successive or Simultaneous
Departures.F AAO JO 7110.65, Para 5-8-5, Departures and Arrivals on Parallel
or Nonintersecting Diverging Runways.REFERENCE −
F AAO JO 7110.65, Para 5-8-3, Successive or Simultaneous
Departures.F AAO JO 7110.65, Para 5-8-5, Departures and Arrivals on Parallel
or Nonintersecting Diverging Runways.
FAAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
12/10/15 JO 7110.65W
Briefing Guide BG−46OLD NEW
3-10-3. SAME RUNWAY SEPARATION 3-10-3. SAME RUNWAY SEPARATION
Title through b No Change
1. The heavy jet/B757 to aircraft landing behind
a departing/arriving heavy jet/ B757 on the same or
parallel runways separated by less than 2,500 feet.1. The super or heavy to aircraft landing behind
a departing/arriving super or heavy on the same or
parallel runways separated by less than 2,500 feet.
2. The large aircraft to a small aircraft landing
behind a departing/arriving large aircraft on the
same or parallel runways separated by less than2,500 feet.2. The B757/
large aircraft to a small aircraft
landing behind a departing/arriving B757/ large
aircraft on the same or parallel runways separatedby less than 2,500 feet.
OLD
NEW
3-10-4. INTERSECTING RUNWAY/
INTERSECTING FLIGHT PATH
SEPARATION3-10-4. INTERSECTING RUNWAY/
INTERSECTING FLIGHT PATH
SEPARATION
Title through
WAKE TURBULENCE APPLICATIONNo Change
c. Separate IFR/VFR aircraft landing behind a
departing heavy jet/B757 on a crossing runway if
the arrival will fly through the airborne path of thedeparture-
2 minutes or the appropriate radar
separation minima. (See FIG 3-10-10 .)c. Separate IFR/VFR aircraft landing behind a
departing aircraft on a crossing runway if the
arrival will fly through the airborne path of thedeparture by
the appropriate radar separation or the
following interval: (See FIG 3-10-10):
Add 1. Heavy, large, or small behind super − 3
minutes.
Add 2. Heavy, large, or small behind heavy − 2
minutes.
Add 3. Small behind B757 − 2 minutes.
d. Issue wake turbulence cautionary advisories,
the position, altitude if known, and direction of
flight of the heavy jet/ B757 to:d. Issue wake turbulence cautionary advisories,
the position, altitude if known, and direction of
flight of the super, heavy , or B757 to:
REFERENCE −
AC 90−23, Air craft Wake Turbulence, Para 12, Pilot Responsibility.REFERENCE −
AC 90−23, Air craft Wake Turbulence, Para 11, Pilot Responsibility.
FIG 3-10-10
Intersecting Runway SeparationNo Change
1. IFR/VFR aircraft landing on crossing
runways behind a departing heavy jet/ B757; if the
arrival flight path will cross the takeoff path behind
the heavy jet/ B757 and behind the heavy jet/B757
rotation point. (See FIG 3 −10−11.)1. All aircraft landing on a crossing runway
behind a departing super or heavy , or a small
aircraft landing on a crossing runway behind a
departing B757, if the arrival flight path will cross
the takeoff path behind the departing aircraft
rotation point. (See FIG 3 −10−11.)
FIG 3-10-11 through EXAMPLE No Change
2. VFR aircraft landing on a crossing runway
behind an arriving heavy jet/ B757 if the arrival
flight path will cross. (See FIG 3-10-12.)2. All VFR aircraft landing on a crossing runway
behind an arriving super or heavy , and VFR small
aircraft landing on a crossing runway behind a
B757 , if the arrival flight path s will cross. (See FIG
3-10-12.)
12/10/15 JO 7110.65W
Briefing Guide BG−47OLD NEW
5-5-4. MINIMA 5-5-4. MINIMA
Title through e No Change
f. Separate aircraft operating directly behind, or
directly behind and less than 1,000 feet below, or
following an aircraft conducting an instrumentapproach by:g.
Separate aircraft operating directly behind or
following an aircraft conducting an instrument
approach by the minima specified and in
accordance with the following:
NOTE−
1. When applying wake turbulence separation criteria,
directly behind means an aircraft is operating within
2,500 feet of the flight path of the leading aircraft over
the surface of the earth .
2. Consider parallel runways less than 2,500 feet apart
as a single runway because of the possible effects of wake
turbulence.NOTE−
Consider parallel runways less than 2,500 feet apart as
a single runway because of the possible effects of wake
turbulence.
1. Heavy behind heavy − 4 miles. 1. When operating within 2,500 feet of the
flight path of the leading aircraft over the
surface of the earth and less than 1,000 feet
below:
Add (a) TERMINAL. Behind super:
Add (1) Heavy - 6 miles.
Add (2) Large - 7 miles.
Add (3) Small - 8 miles.
Add (b) EN ROUTE. Behind super - 5 miles,
unless the super is operating at or below FL240
and below 250 knots, then:
Add (1) Heavy - 6 miles.
Add (2) Large - 7 miles.
Add (3) Small - 8 miles.
Add (c) Behind heavy:
Add (1) Heavy - 4 miles.
Add (2) Large or small - 5 miles.
2. Large/heavy behind B757 − 4 mil es. 2. Separate small aircraft behind a B757 by 4
miles when operating within 2,500 feet of the
flight path of the leading aircraft over the
surface of the earth and/or less than 500 feet
below.
3. Small behind B757 − 5 miles. 3. TERMINAL. When departing parallel
runways separated by less than 2,500 feet, the
2,500 feet requirement in subparagraph 2 is not
required when a small departs the parallel
runway behind a B757. Issue a wake turbulence
cautionary advisory and instructions that will
establish lateral separation in accordance with
subparagraph 2. Do not issue instructions that
will allow the small to pass behind the B757.
12/10/15 JO 7110.65W
Briefing Guide BG−48Add NOTE−
The application of paragraph 5-8-3, Successive or
Simultaneous Departures, satisfies this requirement
when an initial heading is issued with the take-off
clearance.
4. Small/large behind heavy – 5 miles. Delete
g. In addition to subpara f , separate an aircraft
landing behind another aircraft on the same runway,
or one making a touch-and-go, stop-and-go, or lowapproach by ensuring the following minima will
exist at the time the preceding aircraft is over the
landing threshold:h
. In addition to subpara g , separate an aircraft
landing behind another aircraft on the same runway,
or one making a touch-and-go, stop-and-go, or lowapproach by ensuring the following minima will
exist at the time the preceding aircraft is over the
landing threshold:
NOTE−
Consider parallel runways less than 2,500 feet apart as
a single runway because of the possible effects of wake
turbulence.No Change
1. Small behind large − 4 miles . No Change
2. Small behind B757 −5 miles. Delete
3. Small behind heavy − 6 miles. 2. Small behind heavy − 6 miles.
If the landing threshold cannot be determined,
apply the above minima as constant or increasing at
the closest point that can be determined prior to the
landing threshold.No Change
Add i. TERMINAL. When NOWGT is displayed in
an aircraft data block, provide 10 miles
separation behind the preceding aircraft and 10
miles separation to the succeeding aircraft.
h. TERMINAL . 2.5 nautical miles (NM)
separation is authorized between aircraft
established on the final approach course within 10NM of the landing runway when operating in single
sensor slant range mode and aircraft remains within
40 miles of the antenna and:j.
TERMINAL . 2.5 nautical miles (NM) separation
is authorized between aircraft established on the
final approach course within 10 NM of the landingrunway when operating in single sensor slant range
mode and aircraft remains within 40 miles of the
antenna ,
and:
1. The leading aircraft’s weight class is the same
or less than the trailing aircraft;No Change
2. Heavy aircraft and the Boeing 757 are
permitted to participate in the separation reduction
as the trailing aircraft only;2. Super and heavy aircraft are permitted to
participate in the separation reduction as the trailing
aircraft only;
OLD NEW
5-8-3. SUCCESSIVE OR SIMULTANEOUS
DEPARTURES5-8-3. SUCCESSIVE OR SIMULTANEOUS
DEPARTURES
Title through FIG 5-8-3 No Change
NOTE−
This procedure does not apply when a small aircraft is
taking off from an intersection on the same runway
behind a large aircraft or when an aircraft is departing
behind a heavy jet/B757.NOTE−
This procedure does not apply when wake turbulence
separation is required.
12/10/15 JO 7110.65W
Briefing Guide BG−49REFERENCE −
F AAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures.F AAO JO 7110.65, Para 3 −9−8, Intersecting Runway/Intersecting
Flight Path Operations.
F AAO JO 7110.65, Para 5 −5−4, Minima.REFERENCE −
F AAO JO 7110.65, Para 3 −9−7, Wake Turbulence Separation for
Intersection Departures.F AAO JO 7110.65, Para 3 −9−8, Intersecting Runway/Intersecting
Flight Path Operations.
F AAO JO 7110.65, Para 5 −5−4, Minima.
FAAO JO 7110.65, Para 554, Minima, Subparagraph g.
b1 through FIG 5-8-5 No Change
NOTE−
This procedure does not apply when aircraft are de-
parting behind a heavy jet/B757.NOTE−
This procedure does not apply when wake turbulence
separation is required.
Add REFERENCE −
FAAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.
OLD NEW
5-8-5. DEPARTURES AND ARRIV ALS ON
PARALLEL OR NONINTERSECTING
DIVERGING RUNWAYS5-8-5. DEPARTURES AND ARRIV ALS ON
PARALLEL OR NONINTERSECTING
DIVERGING RUNWAYS
Title through b1 No Change
NOTE−
In the event of a missed approach by a heavy jet/B757,
apply the procedures in Para 3-9-6, Same RunwaySeparation, or
Para 3-9-8, Intersecting
Runway/Intersecting Flight Path Operations, ensurethat the heavy jet
does not overtake or cross in front of an
aircraft departing from the adjacent parallel runway.NOTE−
In the event of a missed approach by an aircraft
requiring wake turbulence separation behind it , apply
the procedures in Para 3-9-6, Same Runway Separation,
Para 3-9-8, Intersecting Runway/Intersecting FlightPath Operations, ensure that the larger aircraft
does not
overtake or cr oss in front of an air craft departing from the
adjacent parallel runway.
Add REFERENCE −
FAAO JO 7110.65, Para 5-5-4, Minima, Subparagraph f.
OLD NEW
6-1-4. ADJACENT AIRPORT OPERATION 6-1-4. ADJACENT AIRPORT OPERATION
Title through WAKE TRUBULENCE
APPLICATIONNo Change
The ATC facility providing service to heavy
jets/B757s and having control jurisdiction at
adjacent airports must separate arriving or
departing IFR aircraft on a course that will cross
behind the flight path of a heavy jet/B757 − 2
minutes.The ATC facility having control jurisdiction at
adjacent airports must separate arriving or
departing IFR aircraft on a course that will cross the
flight path of an aircraft requiring wake
turbulence separation in accordance with the
following:
Add a. Heavy, large, or small behind super − 3
minutes.
Add b. Heavy, large, or small behind heavy − 2
minutes.
Add c. Small behind B757 - 2 minutes.
12/10/15 JO 7110.65W
Briefing Guide BG−50OLD
FIG 6−1−1
Adjacent Airport Operation – Arrival
NEW
FIG 6−1−1
Adjacent Airport Operation – Arrival
OLD
FIG 6−1−2
Adjacent Airport Operation – Departure
12/10/15 JO 7110.65W
Briefing Guide BG−51NEW
FIG 6−1−2
Adjacent Airport Operation – Departure
OLD NEW
6-1-5. ARRIV AL MINIMA 6-1-5. ARRIV AL MINIMA
Title through
WAKE TURBULENCE APPLICATIONNo Change
Separate IFR aircraft landing behind an arriving
heavy jet/B757 by 2 minutes when arriving:a. Separate IFR aircraft landing behind an arriving
aircraft to the same runway:
a. The same runway (use 3 minutes for a small
aircraft behind a heavy jet/B757).Delete
b. A parallel runway separated by less than
2,500 feet.Delete
c. A crossing runway if projected flight paths will
cross. (See FIG 6 -1-3.)Delete
Add 1. Behind super:
Add (a) Heavy or large − 3 minutes.
Add (b) Small − 4 minutes.
Add 2. Behind heavy:
Add (a) Heavy or large − 2 minutes.
Add (b) Small − 3 minutes.
Add 3. Small behind B757 − 3 minutes.
Add b. Separate IFR aircraft landing behind an
arriving aircraft to a parallel runway separated
by less than 2,500 feet, or a crossing runway if
projected flight paths will cross:
Add 1. Heavy, large, or small behind super − 3
minutes.
Add 2. Heavy, large, or small behind heavy − 2
minutes.
Add 3. Small behind B757 − 2 minutes.
12/10/15 JO 7110.65W
Briefing Guide BG−52OLD
FIG 6-1-3
Arrival Minima
Landing Behind an Arriving Heavy Jet/B757
NEW
FIG 6-1-3
Arrival Minima Landing Behind an Arriving Aircraft Requiring Wake Turbulence Separation
OLD NEW
6-7-5. INTERV AL MINIMA 6-7-5. INTERV AL MINIMA
Use a 2-minute or a 5-mile radar interval (except for
a small aircraft behind a heavy aircraft: use a
3-minute or a 6-mile radar interval) as the minimum
between successive appro aches and increase the
interval, as necessary, taking into account the:Use the following time or radar interval as the
minimum interval between successive approaches:
NOTE−
Increased separation is required for small aircraft
behind heavy aircraft because of the possible effects of
wake turbulence.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−53REFERENCE −
F AAO JO 7110.65, Para 5 −9−5, Approach Separation
Responsibility.F AAO JO 7110.65, Para 6 −7−1, Application.
F AAO JO 7110.65, Para 6 −7−2, Approach Sequence.No Change
Add a. Behind super:
Add 1. Heavy − 3 minutes or 6 miles.
Add 2. Large − 3 minutes or 7 miles.
Add 3. Small − 4 minutes or 8 miles.
Add b. Behind heavy:
Add 1. Heavy − 2 minutes or 4 miles.
Add 2. Large − 2 minutes or 5 miles.
Add 3. Small − 3 minutes or 6 miles.
Add c. Small behind B757 − 2 minutes or 4 miles.
Add d. Increase the interval, as necessary, taking
into account the:
a through d Renumber d1 through d4
OLD NEW
7-4-3. CLEARANCE FOR VISUAL
APPROACH7-4-3. CLEARANCE FOR VISUAL
APPROACH
Title through c3 No Change
d. All aircraft following a heavy jet/ B757 must be
informed of the airplane manufacturer and/or
model.d. All aircraft following a heavy , or a small
aircraft following a B757 , must be informed of the
airplane manufacturer and/or model.
EXAMPLE −
“Cessna Three Four Juliet, following a Boeing 757, 12
o’clock, six miles.”
or
“Cessna Three Four Juliet, following a Seven fifty
seven, 12 o’clock, six miles.”No Change
REFERENCE −
FAAO JO 7110.65, Para.2 −4−21, Description of Air craft Types.No Change
Add NOTE−
Visual separation is not authorized when the lead air-
craft is a super.
Add REFERENCE −
FAAO JO 7110.65, Para 7-2-1.
OLD NEW
7-4-4. APPROACHES TO MULTIPLE
RUNWAYS7-4-4. APPROACHES TO MULTIPLE
RUNWAYS
Title through b1 No Change
2. When the aircraft flight paths intersect, ensure
another form of approved separation is maintained
until visual separation is provided.2. When the aircraft flight paths intersect, ensure
approved separation is maintained until visual
separation is provided.
c No Change
12/10/15 JO 7110.65W
Briefing Guide BG−541. Parallel runways separated by less than 2,500
feet. Unless standard separation is provided by
ATC, an aircraft must report sighting a precedingaircraft making an approach (instrument or visual)
to the adjacent parallel runway. When an aircraft
reports another aircraft in sight on the adjacent final
approach course and visual separation is applied,
controllers must advise the succeeding aircraft tomaintain visual separation. However, do not permit
a heavy/B757
aircraft to overtake another aircraft.
Do not permit a large aircraft to overtake a smallaircraft.1. Parallel runways separated by less than 2,500
feet. Unless approved separation is provided by
ATC, an aircraft must report sighting a precedingaircraft making an approach (instrument or visual)
to the adjacent parallel runway. When an aircraft
reports another aircraft in sight on the adjacent final
approach course and visual separation is applied,
controllers must advise the succeeding aircraft tomaintain visual separation. However, do not permit
a super or
heavy aircraft to overtake another
aircraft. Do not permit a B757 or other large
aircraft to overtake a small aircraft.
c2 through c4(a) No Change
(b) When aircraft flight paths intersect, another
form of approved separation must be maintained
until visual separation is provided.(b) When aircraft flight paths intersect, approved
separation must be maintained until visual
separation is provided.
OLD NEW
7-6-7. SEQUENCING 7-6-7. SEQUENCING
Title through c1 No Change
2. When parallel runways are less than 2,500 feet
apart, do not permit a heavy jet/B757 to overtake
any aircraft, nor a large aircraft to overtake a smallaircraft established on final within the facility’s area
of responsibility.2. When parallel runways are less than 2,500 feet
apart, do not permit a super
or heavy aircraft to
overtake any aircraft, nor a B757 or other large
aircraft to overtake a small aircraft established on
final within the facility’s area of responsibility.
1. PARAGRAPH NUMBER AND TITLE: 3-9-9. NONINTERSECTING CONVERGING RUNWAY
OPERATIONS
2. BACKGROUND: During development of the Arrival Departure Windows (ADW) tool, it was discovered
that t here are configurations in which FAA Order JO 7110.65, paragraph 399, could safely support independent
operations without an ADW.
3. CHANGE:
OLD NEW
3−9−9. NONINTERSECTING CONVERGING
RUNWAY OPERATIONS3−9−9. NONINTERSECTING CONVERGING
RUNWAY OPERATIONS
Title through d No Change
e. If the extended centerline of a runway crosses
a converging runway or the extended centerline of
a converging runway within 1 NM of either
departure end, apply the provisions of Paragraph
3-9-8, Intersecting Runway/Intersecting Flight
Path Operations. (See FIG 3-9-15)e. If the extended centerline of a runway crosses
a converging runway or the extended centerline of
a converging runway at a distance of 1NM or less
from either departure end, apply the provisions of
Paragraph 3-9-8, Intersecting Runway Separation,
unless : The facility is using aids specified in a
facility directive, (may include, but are not
limited to, Arrival/Departure Window (ADW),
ASDE-X Virtual Runway Intersection Point
(VRIP), cut-off points or automation). (See FIG
3-9-15 and FIG 3-9-16).
12/10/15 JO 7110.65W
Briefing Guide BG−551. PARAGRAPH NUMBER AND TITLE: 432. DEPARTURE CLEARANCES
2. BACKGROUND: In 2012, in response to industry concerns, the Aeronautical Charting Forum (ACF)
formed a work group to improve the understanding and use of Visual Climb Over Airport (VCOA). The VCOA
option provides an alternative means of departure for those aircraft that are unable to achieve the minimum climb
gradient published for the runway and the departure routing. Since the VCOA is a part of the published Obstacle
Departure Procedure (ODP), when the ODP is included in the ATC clearance, pilots have the option of using the
VCOA option without advising ATC. This lack of specificity can pose a safety concern.
3. CHANGE:
OLD NEW
4-3-2. DEPARTURE CLEARANCES 4-3-2. DEPARTURE CLEARANCES
Title through c2 No Change
Add 3. Do not solicit use of the Visual Climb over
Airport (VCOA) option.
Add NOTE−
Pilots will specifically advise ATC of their intent to
use the VCOA option.
c3 and c4 Renumber to c4 and c5
1. PARAGRAPH NUMBER AND TITLE: 4-8-1. APPROACH CLEARANCE
2. BACKGROUND: Confusion exists concerning the issuance of approach clearances in accordance with
FAAO JO 7110.65, Paragraph 4-8-1, Approach Clearance. The FAAO JO 71 10.65 Revision Steering Committee
convened in August 2014 and was asked to review and modify this paragraph in a manner that would eliminate
this confusion as one of the Top 15 document change proposal taskings for FY2015. Separately, a question was
raised by the Air Traffic Proc edures Advisory Committee (ATPAC) about whether controllers are authorized to
assign altitudes below altitudes published on approach charts. This change clarifies that they are, provided there
is an MV A or MIA that allows it, and the aircraft is assigned an altitude to maintain until reaching a point that it isvertically established on the approach.
3. CHANGE:
OLD
NEW
4-8-1. APPROACH CLEARANCE 4-8-1. APPROACH CLEARANCE
Title through a5 PHRASEOLOGY No Change
12/10/15 JO 7110.65W
Briefing Guide BG−56EXAMPLE −
“Cleared Approach.”
“Cleared V-O-R Approach.”
“Cleared V-O-R Runway Three-Six Approach. ”
“Cleared L-D-A Approach.”
“Cleared L-D-A Runway Three-Six Approach.”
“Cleared I-L-S Approach.”
“Cleared Localizer Approach.”
“Cleared Localizer Back Course Runway One-Three
Approach.”
“Cleared RNAV Z Runway Two-Two Approach.”
“Cleared GPS Runway Two Approach.”
“Cleared BRANCH ONE Arrival and RNAV Runway
One-Three Approach.”
“Cleared I-L-S Runway Three-Six Approach,
glideslope unusable.”“Cleared S-D-F Approach.”“Cleared G-L-S Approach.”EXAMPLE −
“Cleared Approach.”
“Cleared (V-O-R/I-L-S/Localizer) Approach.”
“Cleared L-D-A Runway Three-Six Approach.”
“Cleared Localizer Back Course Runway One-ThreeApproach.”
“Cleared (GPS/RNAV Z) Runway Two-Two Ap-
proach.”
“Cleared BRANCH ONE Arrival and (ILS/RNAV)
Runway One-Three Approach.”
“Cleared I-L-S Runway Three-Six Approach,
glideslope unusable.”“Cleared S-D-F Approach.”“Cleared G-L-S Approach.”
NOTE 1
and 2 No Change
3.In some cases, the name of the approach, as
published, is used to identify the approach, even though
a component of the approach aid, other than the localizeron an ILS is inoperative. Where more than one pr ocedure
to the same runway is published on a single chart, each
must adhere to all final approach guidance contained on
that chart, even though each pr ocedure will be treated as
a separate entity when authorized by ATC. The use of
alphabetical identifiers in the approach name with a
letter from the end of the alphabet; for example, X, Y, Z,
such as “HI TACAN Z Rwy 6L or HI TACAN Y Rwy 6L,”
or “RNAV (GPS) Z Rwy 04 or RNAV (GPS) Y Rwy 04,”
denotes multiple straight-in approaches to the same
runway that use the same approach aid. Alphabetical
suffixes with a letter from the beginning of the alphabet;
for example, A, B, C, denote a procedure that does not
meet the criteria for straight-in landing minimums
authorization.3. In some cases, the name of the approach, as
published, is used to identify the approach, even though
a component of the approach aid, other than the localizeron an ILS is inoperative.
Add 4. Where more than one procedure to the same runway
is published on a single chart, each must adhere to all
final approach guidance contained on that chart, even
though each procedure will be treated as a separate
entity when authorized by ATC.
Add 5. The use of alphabetical identifiers in the approach
name with a letter from the end of the alphabet; for
example, X, Y, Z, such as “HI TACAN Z Rwy 6L or
RNAV(GPS) Y Rwy 04”, denotes multiple straight-in
approaches to the same runway that use the same
approach aid.
Add 6. Alphabetical suffixes with a letter from the beginning
of the alphabet; for example, A, B, C, denote a
procedure that does not meet the criteria for straight-in
landing minimums authorization.
12/10/15 JO 7110.65W
Briefing Guide BG−57NOTE 4 Renumber NOTE 7
5.An aircraft which has been cleared to a holding fix
and prior to r eaching that fix is issued a clearance for an
approach, but not issued a revised routing; that is,
“proceed dir ect to....” may be expected to proceed via the
last assigned route, a feeder route (if one is published on
the appr oach chart), and then to commence the appr oach
as published. If, by following the route of flight to the
holding fix, the aircraft would overfly an IAF or the fixassociated\
with the beginning of a feeder route to be
used, the aircraft is expected to commence the approach
using the published feeder route to the IAF or from theIAF as appropriate; that is, the aircraft would not be
expected to overfly and return to the IAF or feeder r oute.8.
An aircraft which has been clear ed to a holding fix and
prior to reaching that fix is issued a clearance for an
approach, but not issued a revised routing; that is,
“proceed dir ect to....” may be expected to proceed via the
last assigned route, a feeder route (if one is published on
the appr oach chart), and then to commence the appr oach
as published. If, by following the route of flight to the
holding fix, the aircraft would overfly an IAF or the fixassociated with the beginning of a feeder route to be used,
the aircraft is expected to commence the approach using
the published feeder route to the IAF or from the IAF asappropriate. The aircraft would not be expected to
overfly and return to the IAF or feeder route.
NOTE 6
Renumber NOTE 9
REFERENCE −
F AAO 8260.3, United States Standard for Terminal Instrument
Procedures (TERPS).No Change
b.For aircraft operating on unpublished routes,
issue the approach clearance only after the aircraft
is: (See FIG 4 -8-1)b.For aircraft operating on unpublished routes,
issue the approach clearance only after the aircraft
is:
FIG 4 -8-1
Approach Clearance ExampleDelete
1.Established on a segment of a published route
or instrument approach procedure, or1.Established on a segment of a published route
or instrument approach procedure, or (See FIG
4-8-1)
EXAMPLE −
Aircraft 1: The aircraft is established on a segment of
a published route at 5,000 feet. “Cleared V-O-R
Runway Three Four Approach.”EXAMPLE −
The aircraft is established on a segment of a published
route at 5,000 feet. “Cleared V-O-R Runway Three
Four Approach.”
12/10/15 JO 7110.65W
Briefing Guide BG−58Add FIG 4-8-1
Approach Clearance Example
2. Assigned an altitude to maintain until the
aircraft is established on a segment of a published
route or instrument approach procedure.2. Assigned an altitude to maintain until the
aircraft is established on a segment of a published
route or instrument approach procedure. ( See FIG
4-8-2.)
EXAMPLE −
Aircraft 2: The aircraft is inbound to the VOR on an
unpublished direct route at 7,000 feet. The minimum
IFR altitude for IFR operations (14 CFR Section
91.177) along this flight path to the VOR is 5,000 feet.
“Cross the Redding V-O-R at or above five thousand,
cleared V-O-R Runway Three Four Approach.”EXAMPLE −
Aircraft 1 is cleared direct LEFTT. The MVA in the
area is 3,000 feet, and the aircraft is at 4,000 feet.
“Cross LEFTT at or above three thousand five hun-
dred, cleared RNAV Runway One Eight Approach.”
Add The MVA in the area is 3,000 feet and Aircraft 2 is at
3,000 feet. “Cleared direct LEFTT direct CENTR,
maintain three thousand until CENTR, cleared
straight-in RNAV Runway One Eight Approach.”
12/10/15 JO 7110.65W
Briefing Guide BG−59Add FIG 4-8-2
Approach Clearance Example
NOTE 1 and 2 No Change
Add 3. An aircraft is not established on an approach until at
or above an altitude published on that segment of the
approach .
Add REFERENCE −
FAAO 8260.3 United States Standard for Terminal Instrument
Procedures (TERPS), Para 10-2
c No Change
d. For RNA V −equipped aircraft operating on
unpublished routes, issue approach clearance for
conventional or RNA V SIAP including approaches
with RF legs only after the aircraft is: (See FIG
4−8−2).d. Intercept angles greater than 90 degrees may
be used when a pr ocedure turn, a hold-in-lieu of
procedure turn pattern, or arrival holding is
depicted and the pilot will execute the
procedure.
1. Established on a heading or course direct to
the IAF at an intercept angle not greater than 90
degrees and is assigned an altitude in accordance
with b2. Radar monitoring is required to the IAF for
RNA V (RNP) approaches when no hold-in-lieu of
procedure turn is executed.Delete
EXAMPLE −
Aircraft 1 can be cleared direct to CENTR. The
intercept angle at that IAF is 90 degrees or less. The
minimum altitude for IFR operations (14 CFR,
section 91.177) along the flight path to the IAF is
3,000 feet. If a hold in lieu of procedure turn pattern is
depicted at an IAF and a TAA is not defined, the
aircraft must be instructed to conduct a straight-in
approach if ATC does not want the pilot to execute a
hold-in-lieu procedure turn. “Cleared direct CENTR,
maintain at or above three thousand until CENTR,
cleared straight-in RNAV Runway One Eight
Approach.”Delete
12/10/15 JO 7110.65W
Briefing Guide BG−602. Established on a heading or course direct to
the IF at an angle not greater than 90 degrees,
provided the following conditions are met:Delete
(a) Assign an altitude in accordance with b2
that will permit a normal descent to the FAF.Delete
NOTE−
Controllers should expect aircraft to descend at ap-
proximately 150-300 feet per nautical mile when ap-
plying guidance in subpara d2(a).Delete
(b) Radar monitoring is provided to the IF. Delete
(c) The SIAP must identify the intermediate fix
with the letters “IF.”Delete
(d) For procedures where an IAF is published,
the pilot is advised to expect clearance to the IF at
least 5 miles from the fix.Delete
EXAMPLE −
“Expect direct CENTR for RNAV Runway One-Eight
Approach.”Delete
3. Established on a heading or course direct to a
fix between the IF and FAF, at an intercept angle not
greater than 30 degrees, and assigned an altitude in
accordance with b2.Delete
EXAMPLE −
Aircraft 1 is more than 5 miles from SHANN. The min-
imum altitude for IFR operations (14 CFR Sec-
tion 91.177) along the flight path to SHANN is 3,000
feet. SHANN is a step down fix between the IF/IAF
(CENTR) and the FAF . To clear Aircraft 1 to SHANN,
ATC must ensure the intercept angle for the intermedi-
ate segment at SHANN is not greater than 30 degrees
and must be cleared to an altitude that will allow a
normal descent to the F AF . “Cleared direct SHANN,
cross SHANN at or above three thousand, cleared
RNAV Runway One-Eight Approach.”Delete
REFERENCE −
F AAO 7110.65, Par 5-6-2, Methods
F AAO 7110.65, Chapter 5, Section 9, Radar ArrivalsDelete
12/10/15 JO 7110.65W
Briefing Guide BG−61FIG 4−8−2
Approach Clearance Example for RNA V AircraftDelete
EXAMPLE −
Aircraft 2 cannot be cleared direct to CENTR unless
the aircraft is allowed to execute the hold-in-lieu-of
procedure turn. The intercept angle at that IF/IAF is
greater than 90 degrees. The minimum altitude for IFR
operations (14 CFR Section 91.177) along the flight
path to the IAF is 3,000 feet. “Cleared direct CENTR,
maintain at or above three thousand until CENTR,
cleared RNAV Runway One Eight approach.” The pilot
is expected to proceed direct CENTR and execute the
hold-in-lieu of procedure turn.
Aircraft 2 can be cleared direct LEFTT. The intercept
angle at that IAF is 90 degrees or less. The minimum
altitude for IFR operations (14 CFR Section 91.177)
along the flight path to the IAF is 3,000 feet. “Cleared
direct LEFTT, maintain at or above three thousand
until LEFTT, cleared RNAV Runway One-Eight Ap-
proach.” The pilot does not have to be cleared for a
straight-in approach since no hold-in-lieu of procedure
turn pattern is depicted at LEFTT.Delete
REFERENCE −
F AAO JO 7110.65, Chapter 5, Section 9, Radar ArrivalsDelete
12/10/15 JO 7110.65W
Briefing Guide BG−62e.For both RNA V and conventional approaches,
intercept angles greater than 90 degrees may be
used when a procedure turn, a hold-in-lieu of
procedure turn pattern, or arrival holding is
depicted and the pilot will execute the procedure. If
a procedure turn, hold-in-lieu of procedure turn, or
arrival holding pattern is depicted and the angle of
intercept is 90 degrees or less, the aircraft must beinstructed to conduct a straight-in approach if ATC
does not want the pilot to execute a procedure turn
or hold-in-lieu of procedure turn. (See FIG 4 −8−3)e. If a procedure turn, hold-in-lieu of procedure
turn, or arrival holding pattern is depicted and the
angle of intercept is 90 degrees or less, the aircraftmust be instructed to conduct a straight-in approach
if ATC does not want the pilot to execute a
procedure turn or hold-in-lieu of procedure turn.
(See FIG 4 −8−3)
PHRASEOLOGY −
CLEARED STRAIGHT-IN (type) APPROACHDelete
NOTE−
1. Restate “cleared straight-in” in the approach
clearance even if the pilot was advised earlier to expect
a straight-in approach.
2. Some approach charts have an arrival holding pattern
depicted at the IAF using a “thin line” holding symbol.
It is charted where holding is fr equently r equired prior to
starting the approach pr ocedure so that detailed holding
instructions are not requir ed. The arrival holding pattern
is not authorized unless assigned by ATC.Delete
EXAMPLE −
“Cleared direct SECND, maintain at or above three
thousand until SECND, cleared straight-in ILS Runway
One-Eight approach.”Delete
REFERENCE −
AIM, Paragraph 5-4-5, Instrument Approach Procedure Charts
AIM, Paragraph 5-4-9, Procedure Turn and Hold-in-Lieu of
Procedure Turn
12/10/15 JO 7110.65W
Briefing Guide BG−63FIG 4−8−3
Approach Clearance Example for RNA V Aircraft
On a Conventional ApproachDelete
EXAMPLE −
Aircraft 1 can be cleared direct to XYZ VORTAC, or
SECND because the intercept angle is 90 degrees or
less.
Aircraft 2 cannot be cleared to XYZ VORTAC because
the intercept angle is greater than 90 degrees.
Aircraft 2 can be cleared to SECND if allowed to ex-
ecute the hold-in-lieu of procedure turn pattern.Delete
f. Clear RNA V −equipped aircraft conducting
RNA V instrument approach procedures that
contain radius to fix (RF) legs:Delete
1. Via published transitions, or Delete
2. In accordance with paragraph d. Delete
3. Do not clear aircraft direct to any waypoint
beginning or within an RF leg.Delete
4. Do not assign fix/waypoint crossing speeds in
excess of charted speed restrictions.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−64NOTE−
1. RNAV approaches (containing RF legs) that
commence at 10,000 feet or above require special
procedures that will be site specific and specified in a
facility directive.
2. An RF leg is defined as a curved segment indicating a
constant radius circular path about a defined turn center
that begins at a waypoint. RF legs may have maximum
airspeeds charted for procedural containment that must
be followed.
3. If an aircraft is vectored off the procedure, expect the
aircraft to request a return to an IAF .Delete
FIG 4−8−4
Radius to Fix (RF) and Track to Fix (TF)Delete
NOTE−
1. The segment between THIRD and FORTH in FIG
4-8-4 is an RF leg
2. The straight segments between waypoints in FIG 4-8-4
are TF legs.Delete
g. Except when applying radar procedures, timed
or visual approaches, clear an aircraft for an
approach to an airport when the preceding aircraft
has landed or canceled IFR flight plan.Delete
h. Where instrument approaches require radar
monitoring and radar services are not available, do
not use the phraseology “cleared approach,” which
allows the pilot his/her choice of instrument
approaches.Delete
i. Where a terminal arrival area (TAA) has been
established to support RNA V approaches, use the
procedures under subpara b1 and b2 above.
(See FIG 4 −8−5.)Delete
12/10/15 JO 7110.65W
Briefing Guide BG−65EXAMPLE −
Aircraft 1: The aircraft has crossed the TAA boundary
and is therefore established on a segment of the
approach. “Cleared R −NAV Runway One Eight
Approach.”
Aircraft 2: The aircraft is inbound to the CHARR IAF
on an unpublished direct route at 7,000 feet. The
minimum IFR altitude for IFR operations (14 CFR
Section 91.177) along this flight path to the IAF is
5,000 feet. “Cleared direct CHARR, maintain at or
above five thousand until entering the TAA, cleared
RNAV Runway One-Eight Approach.”Delete
FIG 4−8−5
Basic “T” and TAA DesignDelete
j. When GPS TESTING NOTAMs are published
and testing is actually occurring, inform pilots
requesting or cleared for a RNA V approach that
GPS may not be available and request intentions.
Do not resume RNA V approach operations until
certain that GPS interference is no longer a factor or
such GPS testing exercise has ceased.Delete
k. During times when pilots report GPS
anomalies, request the pilot’s intentions and/or
clear that aircraft for an alternative approach, if
available and operational. Announce to other
aircraft requesting an RNA V approach that GPS is
reported unavailable and request intentions.Delete
REFERENCE −
F AAO JO 7110.65, Para 2 −1−10, NAVAID Malfunctions.
F AAO JO 7110.65, Para 4 −7−12, Airport Conditions.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−66l. When clearing an aircraft for an RNA V
approach, and a GPS NOTAM is published (a
WAAS NOTAM is not issued), both GPS and
WAAS may become unavailable. Therefore, when
a GPS anomaly is reported, request the pilot’s
intentions.Delete
NOTE−
WAAS UNAVAILABLE NOTAMs are published to
indicate a failure of a WAAS system component.
Airborne GPS/WAAS equipment may revert to GPS −only
operation which satisfies the requirements for basic
RNAV (GPS) approaches to the airport of intended
landing or filed alternate airport, if airborne equipment
is approved for such operations.Delete
Add PHRASEOLOGY −
CLEARED STRAIGHT-IN (type) APPROACH
Add NOTE−
1.Restate “cleared straight-in” in the approach
clearance even if the pilot was advised earlier to expect
a straight-in approach.
2.Some approach charts have an arrival holding
pattern depicted at the IAF using a “thin line” holding
symbol. It is charted where holding is frequently
required prior to starting the approach procedure so
that detailed holding instructions are not required. The
arrival holding pattern is not authorized unless
assigned by ATC.
Add EXAMPLE −
“Cleared direct SECND, maintain at or above three
thousand until SECND, cleared straight-in ILS Run-
way One-Eight approach.”
Add REFERENCE −
AIM, Paragraph 5-4-5, Instrument Approach Procedure Charts
AIM, Paragraph 5-4-9, Procedure Turn and Hold-in-lieu of
Procedure Turn
12/10/15 JO 7110.65W
Briefing Guide BG−67Add FIG 4−8−3
Approach Clearance Example
For Aircraft On a Conventional Approach
Add EXAMPLE −
Aircraft 1 can be cleared direct to XYZ VORTAC, or
SECND because the intercept angle is 90 degrees or
less.
Aircraft 2 cannot be cleared to XYZ VORTAC be-
cause the intercept angle is greater than 90 degrees.
Aircraft 2 can be cleared to SECND if allowed to ex-
ecute the hold-in-lieu of procedure turn pattern.
Add f. Except when applying radar procedures,
timed or visual approaches, clear an aircraft for
an approach to an airport when the preceding
aircraft has landed or canceled IFR flight plan.
Add g.Where instrument approaches require
radar monitoring and radar services are not
available, do not use the phraseology “cleared
approach,” whic h allows the pilot his/her choice
of instrument approaches.
Add RNA V APPLICATION
12/10/15 JO 7110.65W
Briefing Guide BG−68Add h. For RNA V −equipped aircraft operating on
unpublished routes, issue approach clearance
for conventional or RNA V SIAP including
approaches with RF legs only after the aircraft
is: (See FIG 4 −8−4).
Add 1. Established on a heading or course direct to
the IAF at an intercept angle not greater than 90
degrees and is assigned an altitude in accordance
with b2. Radar monitoring is r equired to the IAF
for RNA V (RNP) approaches when no
hold−in−lieu of pr ocedure turn is executed.
Add EXAMPLE −
Aircraft 1 can be cleared direct to CENTR. The
intercept angle at that IAF is 90 degrees or less. The
minimum altitude for IFR operations (14 CFR,
section 91.177) along the flight path to the IAF is
3,000 feet. If a hold in lieu of procedure turn pattern
is depicted at an IAF and a TAA is not defined, the
aircraft must be instructed to conduct a straight-in
approach if ATC does not want the pilot to execute a
hold-in-lieu procedure turn. “Cleared direct CENTR,
maintain at or above three thousand until CENTR,
cleared straight-in RNAV Runway One-Eight
Approach.”
Add 2.Established on a heading or course direct
to the IF at an angle not greater than 90 degr ees,
provided the following conditions are met:
Add (a)Assign an altitude in accordance with
b2 that will permit a normal descent to the FAF.
Add NOTE−
Controllers should expect aircraft to descend at
approximately 150-300 feet per nautical mile when
applying guidance in subpara d2(a).
Add (b)Radar monitoring is provided to the IF.
Add (c)The SIAP must identify the
intermediate fix with the letters “IF .”
Add (d) For procedures where an IAF is
published, the pilot is advised to expect
clearance to the IF at least 5 miles from the fix.
Add EXAMPLE −
“Expect direct CENTR for RNAV Runway One-Eight
Approach.”
Add 3.Established on a heading or course direct
to a fix between the IF and FAF, at an intercept
angle not greater than 30 degrees, and assigned
an altitude in accordance with b2.
12/10/15 JO 7110.65W
Briefing Guide BG−69Add EXAMPLE −
Aircraft 1 is more than 5 miles from SHANN. The
minimum altitude for IFR operations (14 CFR Sec-
tion 91.177) along the flight path to SHANN is 3,000
feet. SHANN is a step down fix between the IF/IAF
(CENTR) and the FAF . To clear Aircraft 1 to
SHANN, ATC must ensure the intercept angle for the
intermediate segment at SHANN is not greater than
30 degrees and must be cleared to an altitude that will
allow a normal descent to the FAF . “Cleared direct
SHANN, cross SHANN at or above three thousand,
cleared RNAV Runway One-Eight Approach.”
Add REFERENCE −
FAAO 7110.65, Par 5-6-2, Methods
FAAO 7110.65, Chapter 5, Section 9, Radar Arrivals
Add FIG 4 -8−4
Approach Clearance Example
For RNA V Aircraft
12/10/15 JO 7110.65W
Briefing Guide BG−70Add EXAMPLE −
Aircraft 2 cannot be cleared direct to CENTR unless
the aircraft is allowed to execute the hold-in-lieu of
procedure turn. The intercept angle at that IF/IAF is
greater than 90 degrees. The minimum altitude for
IFR operations (14 CFR Section 91.177) along the
flight path to the IAF is 3,000 feet. “Cleared direct
CENTR, maintain at or above three thousand until
CENTR, cleared RNAV Runway One-Eight ap-
proach.” The pilot is expected to proceed direct
CENTR and execute the hold-in-lieu of procedure
turn.
Aircraft 2 can be cleared direct LEFTT. The intercept
angle at that IAF is 90 degrees or less. The minimum
altitude for IFR operations (14 CFR Section 91.177)
along the flight path to the IAF is 3,000 feet.
“Cleared direct LEFTT, maintain at or above three
thousand until LEFTT, cleared RNAV Runway
One-Eight Approach.” The pilot does not have to be
cleared for a straight-in approach since no
hold-in-lieu of procedure turn pattern is depicted at
LEFTT.
Add REFERENCE −
FAAO JO 7110.65, Chapter 5, Section 9, Radar Arrivals
Add i. Clear RNA V −equipped aircraft conducting
RNA V instrument approach procedures that
contain radius to fix (RF) legs:
Add 1. Via published transitions, or
Add 2. In accordance with paragraph d.
Add 3. Do not clear air craft direct to any waypoint
beginning or within an RF leg.
Add 4. Do not assign fix/waypoint crossing speeds
in excess of charted speed restrictions.
Add NOTE−
1.RNAV approaches (containing RF legs) that
commence at 10,000 feet or above require special
procedures that will be site specific and specified in a
facility directive.
2.An RF leg is defined as a curved segment indicating
a constant radius circular path about a defined turn
center that begins at a waypoint. RF legs may have
maximum airspeeds charted for procedural
containment that must be followed.
3.If an aircraft is vectored off the procedure, expect
the aircraft to request a return to an IAF .
12/10/15 JO 7110.65W
Briefing Guide BG−71Add FIG 4−8−5
Radius to Fix (RF) and Track to Fix (TF)
Add NOTE−
1.The segment between THIRD and FORTH in FIG
4-8-5 is an RF leg.
2.The straight segments between waypoints in FIG
4-8-5 are TF legs.
Add j.Where a terminal arrival area (TAA) has
been established to support RNA V approaches,
use the procedures under subpara b1 and b2
above. (See FIG 4−8−6.)
Add EXAMPLE −
Aircraft 1: The aircraft has crossed the TAA
boundary and is therefore established on a segment
of the approach. “Cleared R-NAV Runway One-Eight
Approach.”
Aircraft 2: The aircraft is inbound to the CHARR
IAF on an unpublished direct route at 7,000 feet. The
minimum IFR altitude for IFR operations (14 CFR
Section 91.177) along this flight path to the IAF is
5,000 feet. “Cleared direct CHARR, maintain at or
above five thousand until entering the TAA, cleared
RNAV Runway One-Eight Approach.”
12/10/15 JO 7110.65W
Briefing Guide BG−72Add FIG 4−8−6
Basic “T” and TAA Design
Add k. When GPS TESTING NOTAMs are
published and testing is actually occurring,
inform pilots requesting or cleared for a RNA V
approach that GPS may not be available and
request intentions. Do not resume RNA V
approach operations until certain that GPS
interference is no longer a factor or such GPS
testing exercise has ceased.
Add l. During times when pilots report GPS
anomalies, request the pilot’s intentions and/or
clear that aircraft for an alternative approach, if
available and operational. Announce to other
aircraft r equesting an RNA V approach that GPS
is reported unavailable and request intentions.
Add REFERENCE −
FAAO JO 7110.65, Para 2 −1−10, NAV AID Malfunctions.
FAAO JO 7110.65, Para 4 −7−12, Airport Conditions.
Add m. When clearing an aircraft for an RNA V
approach, and a GPS NOTAM is published (a
WAAS NOTAM is not issued), both GPS and
WAAS may become unavailable. Therefore,
when a GPS anomaly is reported, request the
pilot’s intentions.
Add NOTE−
WAAS UNAVAILABLE NOTAMs are published to
indicate a failure of a WAAS system component.
Airborne GPS/WAAS equipment may revert to
GPS−only operation which satisfies the requirements
for basic RNAV (GPS) approaches to the airport of
intended landing or filed alternate airport, if airborne
equipment is approved for such operations.
12/10/15 JO 7110.65W
Briefing Guide BG−731. PARAGRAPH NUMBER AND TITLE:
4-8-11. PRACTICE APPROACHES
7-3-1. VFR-ON-TOP
10-6-5. SERVICES TO RESCUE AIRCRAFT
2. BACKGROUND: FAA Order JO 7110.65 uses several terms when describing aircraft separation applied by
controllers. The use of undefined terms introduces a variety of interpretations and the possibility of altering the
intent of the paragraph. “Standard IFR separation” is not defined in this order and its use may infer that various
standards of separation exist. Guidance for the application of IFR separation is contained in Chapter 3, Chapter 4,
Chapter 5, Chapter 6, and Chapter 7 of this order. Removing extraneous and undefined words reduces the chance
of misinterpretation.
3. CHANGE:
OLD NEW
4-8-11. PRACTICE APPROACHES 4-8-11. PRACTICE APPROACHES
Title through a1(b) No Change
2. Where procedures require application of IFR
separation to VFR aircraft practicing instrument
approaches, standard IFR separation in accordance
with Chapter 3, Chapter 4, Chapter 5, Chapter 6,
and Chapter 7 must be provided. Controller
responsibility for separation begins at the point
where the approach clearance becomes effective.
Except for heavy aircraft/B757, 500 feet verticalseparation may be applied between VFR aircraft
and between a VFR and an IFR aircraft.2. Where procedures require application of IFR
separation to VFR aircraft practicing instrument
approaches, IFR separation in accordance with
Chapter 3, Chapter 4, Chapter 5, Chapter 6, and
Chapter 7 must be provided. Controller
responsibility for separation begins at the point
where the approach clearance becomes effective.
Except for heavy aircraft/B757, 500 feet verticalseparation may be applied between VFR aircraft
and between a VFR and an IFR aircraft.
OLD
NEW
7-3-1. VFR-ON-TOP 7 -3-1. VFR-ON-TOP
Title through NOTE 1. No Change
2. Although standard IFR separation is not applied,
controllers must continue to provide traffic advisories
and safety alerts, and apply merging target pr ocedures to
aircraft operating VFR-on-top.2. Although IFR separation is not applied, controllers
must continue to provide traffic advisories and safety
alerts, and apply merging target procedures to aircraft
operating VFR-on-top.
OLD NEW
10-6-5. SERVICES TO RESCUE AIRCRAFT 10-6-5. SERVICES TO RESCUE AIRCRAFT
a. Provide standard IFR separation between the
SAR and the aircraft in distress, except when visual
or radar contact has been established by the searchand rescue aircraft and the pilots of both aircraft
concur, IFR separation may be discontinued.a. Provide IFR separation between the SAR and
the aircraft in distress, except when visual or radar
contact has been established by the search andrescue aircraft and the pilots of both aircraft concur,
IFR separation may be discontinued.
12/10/15 JO 7110.65W
Briefing Guide BG−741. PARAGRAPH NUMBER AND TITLE: 5−4−2. TERMS
2. BACKGROUND: On February 29, 1996, a change was made to FAA JO 7110.65J, Paragraph 5-4-2c,
TERMS, that defined a point out as a “physical or automated action” taken by a controller in lieu of “an action”
taken by a controller. The background for the change explained this was done only to improve understanding.Upon review of paragraph 5-4-2 it has been determined that the original language of “an action” is preferable and
is consistent with the wording used in the definition of a “handoff” in paragraph 5-4-2a.
3. CHANGE:
OLD
NEW
5−4−2. TERMS 5 −4−2. TERMS
Title through b No Change
c. Point out . A physical or automated action taken
by a controller to transfer the radar identification of
an aircraft to another controller and radiocommunications will not be transferred.c. Point out . An
action taken by a controller to
transfer the radar identification of an aircraft to
another controller and radio communications willnot be transferred.
1. PARAGRAPH NUMBER AND TITLE: 5-6-1. APPLICATION
2. BACKGROUND: With the advent of NextGEN, the number of RNA V equipped aircraft within the NAS has
increased, and RNA V procedures have become the industry standard. Throughout FAA Order JO 71 10.65, there
are several sections that cover the proper handling of RNA V aircraft regarding routing assignments and the ability
to issue amended routes.
3. CHANGE:
OLD NEW
5-6-1. APPLICATION 5-6-1. APPLICATION
Vector aircraft: No Change
a. In controlled airspace for separation, safety,
noise abatement, operational advantage,
confidence maneuver, or when a pilot requests.Allow aircraft operating on an RNA V route to
remain on their own navigation to the extent
possible.a. In controlled airspace for separation, safety,
noise abatement, operational advantage,
confidence maneuver, or when a pilot requests.
1. PARAGRAPH NUMBER AND TITLE: 5−9−6. SIMULT ANEOUS DEPENDENT
APPROACHES
2. BACKGROUND: The Flight Standards Service recently released technical report DOT-FAA- AFS-400-83,
Reduction of Diagonal Separation from 1.5 Nautical Miles (NM) to 1.0 NM for Parallel Dependent Approaches.
The report, generated at the request of Air Traffic, now permits the use of 1 NM radar separation diagonally whenrunway centerlines are separated by at least 2,500 feet but no more than 3,600 feet, and the legacy 1.5 NM radar
separation diagonally will now be required when runway centerlines are separated by more than 3,600 feet but no
more than 4,300 feet. The application of 1 NM or 1.5 NM diagonal minima ensures aircraft remain staggered on
adjacent approaches. This reduces the risk of collision from aircraft inadvertently deviating from the finalapproach path.
12/10/15 JO 7110.65W
Briefing Guide BG−753. CHANGE:
OLD NEW
5−9−6. SIMULT ANEOUS DEPENDENT
APPROACHES5−9−6. SIMULT ANEOUS DEPENDENT
APPROACHES
Title through a1 No Change
Add 2. Provide a minimum of 1 mile radar
separation diagonally between successive
aircraft on adjacent final approach courses
when runway centerlines are at least 2,500 feet
but no more than 3,600 feet apart.
AddFIG 5-9-7
Simultaneous Dependent Approaches
Add EXAMPLE −
In FIG 5−9−7, Aircraft 2 is 1.0 mile from Aircraft 1.
Approved radar separation must be maintained
between Aircraft 1 and Aircraft 3.
2. Provide a minimum of 1.5 miles radar
separation diagonally between successive aircraft
on adjacent final approach courses when runwaycenterlines are at least 2,500
feet but no more than
4,300 feet apart.3. Provide a minimum of 1.5 miles radar
separation diagonally between successive aircraft
on adjacent final approach courses when runwaycenterlines are more than 3,600
feet but no more
than 4,300 feet apart.
12/10/15 JO 7110.65W
Briefing Guide BG−76Add FIG 5-9-8
Simultaneous Dependent Approaches
EXAMPLE −
In FIG 5−9−7, Aircraft 2 is 1.5 miles from Aircraft 1,
and Aircraft 3 is 1.5 miles or more from Aircraft 2.
*The resultant separation between Aircraft 1 and 3 is
at least 2.5 miles.EXAMPLE −
In FIG 5−9−8, Aircraft 2 is 1.5 miles from Aircraft 1,
and Aircraft 3 is 1.5 miles or more from Aircraft 2.
Approved radar separation must be maintained
between aircraft on the same final.
3. Provide a minimum of 2 miles radar
separation diagonally between successive aircraft
on adjacent final approach courses where runwaycenterlines are more than 4,300 feet but no more
than 9,000 feet apart.4
. Provide a minimum of 2 miles radar
separation diagonally between successive aircraft
on adjacent final approach courses where runwaycenterlines are more than 4,300 feet but no more
than 9,000 feet apart.
FIG 5-9-8 Re-Label FIG 5-9-9
EXAMPLE −
In FIG 5−9−8, Aircraft 2 is 2 miles from heavy Aircraft
1. Aircraft 3 is a small aircraft and is 6 miles from
Aircraft 1.*The resultant separation between Aircraft 2and 3 is at least 4.2 miles.EXAMPLE −
In FIG 5−9−9
, Aircraft 2 is 2 miles from heavy Aircraft
1. Aircraft 3 is a small aircraft and is 6 miles from
Aircraft 1. *The resultant separation between Aircraft2 and 3 is at least 4.2 miles.
4. Provide the minimum applicable radar
separation between aircraft on the same final
approach course.5. Provide the minimum approved radar
separation between aircraft on the same final
approach course.
1. PARAGRAPH NUMBER AND TITLE: 5-9-7. SIMULTANEOUS INDEPENDENT APPROACHES −
DUAL & TRIPLE
2. BACKGROUND: The Flight Standards Service (AFS) released DOT-FAA-AFS-450-69, Simultaneous
Independent Close Parallel Approaches - High Update Radar Not Required, in September 2011;DOT-FAA-AFS-400-84, Separation Requirements for S imultaneous Offset Independent Dual Instrument
Approaches - High Update Radar Not Required, in July 2014; and DOT-FAA-AFS-400-85, Separation
Requirements for Triple Simultaneous Independent Close Parallel Approaches - High Update Rate Surveillance
Not Required in September 2014. These three technical reports form the framework for the changes containedwithin this document change proposal accounting for new runway centerline spacing (RCLS) distances when
12/10/15 JO 7110.65W
Briefing Guide BG−77operating with dual parallel runways or triple parallel runways. Additionally, they account for the inclusion of
offset approaches to further reduce the RCLS without the need for high update radars and allows for the removal
of the simultaneous independent close parallel approaches without high update radar paragraph due to theduplicative content.
3. CHANGE:
OLD
NEW
5-9-7. SIMULTANEOUS INDEPENDENT
APPROACHES − DUAL & TRIPLE5-9-7. SIMULTANEOUS INDEPENDENT
APPROACHES − DUAL & TRIPLE
Title through a1 NOTE No Change
2. Dual parallel runway centerlines are at least
4,300 feet apart.2. Dual parallel runway centerlines are at least
3,600 feet apart , or dual parallel runway
centerlines are at least 3,000 feet apart with a
2.5/C0095 to 3.0 /C0095 offset approach to either runway and
the airport field elevation is 2,000 feet MSL or
less.
Add NOTE−
Airport field elevation requirement does not apply to
dual parallel runways that are 4,300 feet or more apart.
3. Triple parallel runway centerlines are at least
5,000 feet apart and the airport field elevation is less
than 1,000 feet MSL.3. Triple parallel approaches may be
conducted under one of the following conditions:
Add (a) Parallel runway centerlines are at least
3,900 feet apart and the airport field elevation is
2,000 feet MSL or less; or
Add (b) Parallel runway centerlines are at least
3,000 feet apart, a 2.5 /C0095 to 3.0 /C0095 offset approach to
both outside runways, and the airport field
elevation is 2,000 feet MSL or less; or
Add (c) Parallel runway centerlines are at least
3,000 feet apart, a single 2.5 /C0095 to 3.0 /C0095 offset
approach to either outside runway while parallel
approaches to the remaining two runways are
separated by at least 3,900 feet, and the airport
field elevation is 2,000 feet MSL or less.
Add 4. Provide the minimum applicable radar
separation between aircraft on the same final
approach course.
4. A high-resolution color monitor with alert
algorithms , such as the final monitor aid or that
required in the precision runway monitor program
must be used to monitor approaches where:b. A color digital display set to a 4 to 1 (4:1)
aspect ratio (AR) with visual and aural alert s,
such as the STARS final monitor aid (FMA), and
a surveillance update rate at least 4.8 seconds
must be used to monitor approaches where:
Add 1. Dual parallel runway centerlines are at
least 3,000 and no more than 4,300 feet apart.
(a) Triple parallel runway centerlines are at
least 4,300 but less than 5,000 feet apart and the
airport field elevation is less than 1,000 feet MSL.2. Triple parallel runway centerlines are at least
3,000 but less than 5,000 feet apart and the airport
field elevation is 2,000 feet MSL or less.
12/10/15 JO 7110.65W
Briefing Guide BG−78(b) Triple parallel approaches to airports
where the airport field elevation is 1,000 feet MSL
or more require the high resolution color monitor
with alert algorithms and an approved FAA
aeronautical study.3. Triple parallel approaches to airports where
the airport field elevation is more than 2,000 feet
MSL require use of the FMA system and an
approved FAA aeronautical study.
Add NOTE−
FMA is not required to monitor the NTZ for runway
centerlines greater than 4,300 feet for dual runways,
and 5,000 feet or greater for triple operations.
Add c. FUSION must be discontinued on the FMA
displays and set to a single-sensor, when
conducting final monitoring activities.
5. Provide the minimum applicable radar
separation between aircraft on the same final
approach course.Delete
REFERENCE −
FAAO JO 7110.65, Para 5 −5−5, Minima.No Change
b. The following conditions are required when
applying the minimum separation on adjacent dual
or triple final approach courses allowed in
subparagraph a : d . The following conditions must be met when
conducting dual or triple simultaneous
independent approaches :
NOTE−
Simultaneous independent approaches may only be
conducted where instrument approach charts
specifically authorize simultaneous approaches to
adjacent runways .NOTE−
Simultaneous independent approaches may only be
conducted where instrument approach charts
specifically authorize simultaneous approaches.
b1 and b2 Re-Letter d1 and d2
3. Inform aircraft that simultaneous independent
approaches are in use prior to aircraft departing an
outer fix. This information may be providedthrough the ATIS.3. Inform aircraft that simultaneous independent
approaches are in use, or when runway centerlines
are less than 4,300 feet PRM approaches are in use,
prior to aircraft departing an outer fix. This
information may be provided through the ATIS.
Add REFERENCE −
P/CG Term − Precision Runway Monitor (PRM) System.
b4 Reletter d4
Add NOTE−
Not applicable to approaches with RF legs.
b5 through c1 Re-Letter d5 through e1
PHRASEOLOGY − No Change
2. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in the
controller’s judgment will penetrate the NTZ.2. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in your
judgment will penetrate the NTZ.
12/10/15 JO 7110.65W
Briefing Guide BG−791. PARAGRAPH NUMBER AND TITLE:
5-9-8. SIMULTANEOUS INDEPENDENT CLOSE PARALLEL APPROACHES-HIGH UPDATE RADAR
5-9-9. SIMULTANEOUS INDEPENDENT CLOSE PARALLEL APPROACHES − HIGH UPDATE
RADAR NOT REQUIRED5-9-10. SIMULTANEOUS OFFSET INSTRUMENT APPROACHES (SOIA) −HIGH UPDATE RADAR
5-9-11. SIMULTANEOUS INDEPENDENT APPROACHES TO WIDELY −SPACED PARALLEL RUN-
WAYS WITHOUT FINAL MONITORS
2. BACKGROUND: The Flight Standards Service (AFS) released DOT-FAA-AFS-450-69, Simultaneous
Independent Close Parallel Approaches - High Update Radar Not Required, in September 2011;DOT-FAA-AFS-400-84, Separation Requirements for S imultaneous Offset Independent Dual Instrument
Approaches - High Update Radar Not Required, in July 2014; and DOT-FAA-AFS-400-85, Separation
Requirements for Triple Simultaneous Independent Close Parallel Approaches - High Update Radar
Surveillance Not Required in September 2014. These three technical reports form the framework for the changes
to the ATC order concerning parallel dual and triple operations. Additionally, they account for the inclusion of
offset approaches to further reduce runway centerline spacing without the need for high update radars and allows
for the removal of the simultaneous independent close parallel approaches without high update radar paragraphdue to the duplicative content. In a July 2014 memo from AFS-400, the requirement to radar monitor aircraft onsimultaneous closely spaced approaches to a point 1/2 mile from the departure end of runway in the event of a
missed approach is deemed no longer necessary, and is therefore removed as a requirement in paragraph 5-9-8.
Also the requirement to radar monitor until the aircraft has landed was clarified to require monitoring until one
mile from the threshold, since it is not possible to observe targets to the surface. Lastly, after review, it becameclear that certain provisions concerning monitoring in the existing paragraph 5-9-11 were not consistent with this
paragraph and needed to be removed.
3. CHANGE:
OLD
NEW
5−9−8. SIMULT ANEOUS INDEPENDENT
CLOSE PARALLEL APPROACHES – HIGH
UPDATE RADAR5-9-8. SIMULTANEOUS INDEPENDENTCLOSE PARALLEL APPROACHES -
PRECISION RUNWAY MONITOR (PRM)
APPROACHES
TERMINAL TERMINAL
Simultaneous close parallel approaches may only
be conducted where instrument approach charts
specifically authorize simultaneous approaches to
adjacent runways.a. PRM approaches may only be conducted when
charted in the approach title, and where
instrument approach charts specifically authorizesimultaneous approaches.
Add
REFERENCE −
P/CG- Precision Runway Monitor (PRM) System
P/CG-Simultaneous Close Parallel Approaches
a. Authorize simultaneous independent close
parallel approaches to dual runways with
centerlines separated by at least 3,000 feet with one
final approach course offset by 2.5 degrees using a
precision runway monitor system with a 1.0 second
radar update system and when centerlines are
separated by 3,400 to 4,300 feet when precision
runway monitors are utilized with a radar update
rate of 2.4 seconds or less; andb. PRM approaches must be assigned when
conducting instrument approaches to dual and
triple parallel runways with runway centerlines
separated by less than 4,300 feet.
12/10/15 JO 7110.65W
Briefing Guide BG−801. Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft during turn-on to parallel final approach.c. Provide a minimum of 1,000 feet vertical or a
minimum of 3 miles radar separation between
aircraft during turn-on to parallel or offset final
approach.
NOTE−
Communications transfer to the tower controller’ s
frequency must be completed prior to losing vertical
separation between aircraft.No Change
2. Provide the minimum applicable radar
separation between aircraft on the same final
approach course.d. Provide the minimum applicable radar
separation between aircraft on the same final
approach course.
REFERENCE −
FAAO JO 7110.65, Para 5 −5−4 , Minima.No Change
b. The following conditions are required when
applying the minimum separation on dual final
approach courses allowed in subparagraph a :e. The following conditions must be met when
conducting dual and triple PRM approaches:
b1 and b2 Re-Letter e1 and e2
3. Inform aircraft that closely spaced
simultaneous approaches are in use prior to aircraft
departing an outer fix. This information may beprovided through the ATIS.3. Inform aircraft that PRM
approaches are in use
prior to aircraft departing an outer fix. This
information may be provided through the ATIS.
b4 Re-Letter e4
Add NOTE−
Not applicable to approaches with RF legs.
b5 through b7 Re-Letter e5 through e7
NOTE−
The aircraft is considered the center of the digitized
target for that aircraft for the purposes of ensuring an
aircraft does not penetrate the NTZ.NOTE−
The aircraft is considered the center of the digitized
target for the purposes of ensuring an aircraft does not
penetrate the NTZ.
c. The following procedures must be used by the
final monitor controllers:f. The following procedures must be used by the
final monitor controllers:
1. A controller must provide position
information to an aircraft that is (left/right) of the
depicted localizer centerline, and in their opinion is
continuing on a track that may penetrate the NTZ.1. Provide position information to an aircraft
that is (left/right) of the depicted final approach
course centerline, and in your judgment is
continuing on a track that may penetrate the NTZ.
PHRASEOLOGY −
(Aircraft call sign) I SHOW YOU (left/right) OF THE
FINAL APPROACH COURSE.No Change
2. Instruct the aircraft to return immediately to
the correct final approach course when aircraft are
observed to overshoot the turn-on or continue on atrack which will penetrate the NTZ.No Change
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO THE FINAL APPROACH COURSE.orTURN (left/right) AND RETURN TO THE FINAL
APPROACH COURSE.No Change
12/10/15 JO 7110.65W
Briefing Guide BG−813. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in the
controller’s judgment will penetrate the NTZ.3. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in your
judgment will penetrate the NTZ.
c3 NOTE through c4(b) Re-Letter f3 NOTE through f4(b)
(c) The aircraft has landed or, in the event of a
missed approach, is one-half mile beyond the
departure end of the runway .(c) The aircraft is 1 mile or less from the
runway thr eshold, if pr ocedurally requir ed, and
contained in facility directives.
c5 Re-Letter f5
6. Do not apply the provisions of Paragraph
5-13-1, Monitor on PAR Equipment, for
closely-spaced simultaneous approaches.6. Do not apply the provisions of Paragraph
5-13-1, Monitor on PAR Equipment, for PRM
approaches.
d. Consideration should be given to known factors
that may in any way affect the safety of the
instrument approach phase of flight whenclosely-spaced simultaneous
approaches are being
conducted to parallel runways. Factors include, but
are not limited to, wind direction/velocity,
windshear alerts/reports, severe weather activity,
etc. Closely monitor weat her activity that could
impact the final approach course. Weather
conditions in the vicinity of the final approach
course may dictate a change of the approach in use.g. Consideration should be given to known factors
that may in any way affect the safety of the
instrument approach phase of flight when PRM
approaches are being conducted to parallel
runways. Factors include, but are not limited to,
wind direction/velocity, windshear alerts/reports,
severe weather activity, etc. Closely monitor
weather activity that could impact the finalapproach course. Weather conditions in the vicinity
of the final approach course may dictate a change of
the approach in use.
REFERENCE −
FAAO JO 7110.65, Para 5 −1−13 , Radar Service T ermination.
F AAO JO 71 10.65, Para 5 −9−2 , Final Appr oach Course
Interception.No Change
OLD NEW
5−9−9. SIMULTANEOUS INDEPENDENT
CLOSE PARALLEL APPROACHES − HIGH
UPDATE RADAR NOT REQUIRED.Delete
TERMINAL Delete
a. Simultaneous close parallel approaches may
only be conducted where instrument approach
charts specifically authorize simultaneous
approaches to parallel runways .Delete
b. Apply the following minimum separation when
conducting simultaneous independent close
parallel approaches:Delete
1. Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft during turn-on to parallel final approach
courses.Delete
NOTE−
Communications transfer to the tower controller’ s
frequency will be completed prior to losing vertical
separation between aircraft.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−822. Parallel runway centerlines are separated by
a minimum of 3,600 feet or more, and the airport
elevation is less than 2,000 feet MSL.Delete
3. Provide the minimum applicable radar
separation between aircraft on the same final
approach course.Delete
REFERENCE −
F AAO JO 7110.65, Para 5-5-4, Minima.Delete
c. A high-resolution color monitor with alert
algorithms, such as the final monitor aid, must be
used to monitor close parallel approaches.Delete
d. The following conditions are required when
applying the minimum separation on parallel final
approach courses allowed in subparagraph a:Delete
1. Straight-in landings will be made. Delete
2. All appropriate communication, navigation,
and surveillance systems are operating normally.Delete
3. Inform aircraft that simultaneous closely
spaced approaches are in use prior to aircraft
departing an outer fix. This information may be
provided through the ATIS.Delete
4. Clear the aircraft to descend to the appropriate
glideslope intercept altitude soon enough to provide
a period of level flight to dissipate excess speed.
Provide at least 1 mile of straight flight prior to the
final approach course intercept.Delete
NOTE−
Not applicable to curved and segmented approaches.Delete
5. A NTZ at least 2,000 feet wide is established
an equal distance between extended runway final
approach courses and must be depicted on the
monitor display. The primary responsibility for
navigation on the final approach course rests with
the pilot. Control instructions and information are
issued only to ensure separation between aircraft
and to prevent aircraft from penetrating the NTZ.Delete
6. Monitor all approaches regardless of weather.
Monitor local control frequency to receive any
aircraft transmission. Issue control instructions as
necessary to ensure aircraft do not enter the NTZ.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−83NOTE−
1. Separate monitor controllers, each with
transmit/receive and override capability on the local
control frequency, will ensure aircraft do not penetrate
the depicted NTZ. Facility directives must define
responsibility for providing the minimum applicable
longitudinal separation between aircraft on the same
final approach course.
2. The aircraft is considered the center of the primary
radar r eturn for that air craft, or, if an FMA or other color
final monitor aid is used, the center of the digitized target
of that aircraft, for the purposes of ensuring an aircraft
does not penetrate the NTZ. The provisions of Paragraph
5-5-2, Target Separation, also apply.Delete
e. The following procedures must be used by the
final monitor controllers:Delete
1. Instruct the aircraft to return to the correct
final approach course when aircraft are observed to
overshoot the turn-on or to continue on a track that
will penetrate the NTZ.Delete
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO THE FINAL APPROACH COURSE,
or
TURN (left/right) AND RETURN TO THE FINAL AP-
PROACH COURSEDelete
2. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in the
controller’s judgment will penetrate the NTZ.Delete
PHRASEOLOGY −
TRAFFIC ALERT, (call sign), TURN (right/left) IM-
MEDIATELY HEADING (degrees), CLIMB AND
MAINTAIN (altitude).Delete
3. Terminate radar monitoring when one of the
following occurs:Delete
(a) Visual separation is applied. Delete
(b) The aircraft reports the approach lights or
runway in sight.Delete
(c) The aircraft is 1 mile or less from the
runway threshold, if procedurally required, and
contained in facility directives.Delete
4. Do not inform the aircraft when radar
monitoring is terminated.Delete
5. Do not apply the provisions of Paragraph
5-13-1, Monitor on PAR Equipment, for
simultaneous independent close parallel
approaches.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−84f. Consideration should be given to known factors
that may in any way affect the safety of the
instrument approach phase of flight when
simultaneous independent close parallel
approaches are being conducted to parallel
runways. Factors include, but are not limited to,
wind direction/velocity, wind-shear alerts/reports,
severe weather activity, etc. Closely monitor
weather activity that could impact the final
approach course. Weather conditions in the vicinity
of the final approach course may dictate a change of
approach in use.Delete
REFERENCE −
F AAO JO 7110.65, Para 5-1-13, Radar Service Termination.
F AAO JO 7110.65, Para 5-9-2, Final Approach Course Interception.Delete
OLD NEW
5−9−10. SIMULTANEOUS OFFSET
INSTRUMENT APPROACHES (SOIA) −
HIGH UPDATE RADAR5−9−9. SIMULTANEOUS OFFSET
INSTRUMENT APPROACHES (SOIA) −
HIGH UPDATE RADAR
TERMINAL No Change
a. Simultaneous offset independent approaches
SOIA may be conducted at FAA designated airports
that have an authorization issued by the Director,Terminal
Operations, Headquarters, in
coordination with AFS with parallel runways that
have centerlines separated by less than 3,000 feet
with one final approach course offset by 2.5 to 3.0
degrees using a high update rate surveillancesystem with a 1.0 −second radar update; anda. Simultaneous offset independent approaches
(
SOIA ) may be conducted at FAA designated
airports that have an authorization issued by theDirector, Operations -
Headquarters, AJT-2, in
coordination with AFS with parallel runways that
have centerlines separated by less than 3,000 feet
with one final approach course offset by 2.5 to 3.0
degrees using a high update rate surveillancesystem with a 1.0 −second radar update; and
a1 through b2 No Change
3. Inform aircraft that closely spaced
simultaneous approaches are in use prior to aircraft
departing an outer fix. This information may beprovided through the ATIS.3. Inform aircraft that PRM
approaches are in
use prior to aircraft departing an outer fix. This
information may be provided through the ATIS.
b4 No Change
NOTE−
Not applicable to curved and segmented approachesNOTE−
Not applicable to approaches with RF legs .
b5 through c No Change
1. A controller must provide position
information to an aircraft that is (left/right) of the
depicted final approach course centerline, and intheir opinion
is continuing on a track that may
penetrate the NTZ.1. Provide position information to an aircraft
that is (left/right) of the depicted final approach
course centerline, and in your judgment is
continuing on a track that may penetrate the NTZ.
c1 PHRASEOLOGY through c2 No Change
12/10/15 JO 7110.65W
Briefing Guide BG−85PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO FINAL APPROACH COURSE.OrTURN (left/right) AND RETURN TO THE LOCAL-
IZER/AZIMUTH COURSE.PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO FINAL APPROACH COURSE.OrTURN (left/right) AND RETURN TO THE FINAL AP-
PROACH COURSE.
3. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in the
controller’s judgment will penetrate the NTZ.3. Instruct aircraft on the adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed penetrating or in your
judgment will penetrate the NTZ.
c3 NOTE through c5 No Change
6. Do not apply the provisions of paragraph
5-13-1, Monitor on PAR Equipment, for
closely-spaced simultaneous approaches.6. Do not apply the provisions of paragraph
5-13-1, Monitor on PAR Equipment, for
simultaneous approaches.
d through g2 No Change
3. For runways less than 2,500 feet apart,
whenever the ceiling is less than 500 feet above the
MV A, wake vortex spacing between aircraft onadjacent final approach c ourses, as described in
p
ara 5−5−4, Minima, must be applied unless
acceptable mitigating techniques and operational
procedures have been documented and verified by
an AFS safety assessment and authorized byDirector, Terminal Safety and
Operations Support .
The wake turbulence mitigation techniques
employed will be based on each airport’s specificrunway geometry and meteorological conditions
and implemented through local facility directives.3. For runways less than 2,500 feet apart,
whenever t he ceiling is less than 500 feet above the
MV A, wake vortex spacing between aircraft onadjacent final approach c ourses, as described in
P
ara 5−5−4, Minima, must be applied unless
acceptable mitigating techniques and operational
procedures have been documented and verified by
an AFS safety assessment and authorized by the
Director, Operations -Headquarters, AJT-2 . The
wake turbulence mitigation techniques employed
will be based on each airport’s specific runwaygeometry and meteorological conditions and
implemented through local facility directives.
OLD
NEW
5−9−11. SIMULTANEOUS INDEPENDENT
APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINALMONITORS5−9−10
. SIMULTANEOUS INDEPENDENT
APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINALMONITORS
Add TERMINAL
Simultaneous independent approaches to
widely-spaced parallel runways may only be
conducted where instrument approach charts
specifically authorize simultaneous approaches to
adjacent runways .a. Simultaneous independent approaches to
widely-spaced parallel runways may only be
conducted where instrument approach chartsspecifically authorize simultaneous approaches.
TERMINAL
Delete
a through a2 REFERENCE Re-letter b through b2 REFERENCE
b. The following conditions are required when
applying the minimum separation on
widely−spaced parallel courses allowed in subpara
a:c. The following conditions are required when
applying the minimum separation on
widely−spaced parallel courses allowed in subpara
b:
b1 through b4 Re-Letter c1 through c4
Add NOTE−
Not applicable to approaches with RF legs .
12/10/15 JO 7110.65W
Briefing Guide BG−86b5 Re-letter c5
6. Transfer of communication and monitor
responsibility to the tower controller’s frequency
must be specified in a facility directive and/or Letter
of Agreement.6. Transfer of communication to the tower
controller’s frequency must be specified in a facility
directive and/or Letter of Agreement.
c. The following procedures must be used by the
final approach controllers:d. The following procedures must be used by the
final approach controllers:
NOTE−
There is no requirement for the establishment of a NTZ.NOTE−
There is no requirement for establishment of a NTZ.
1. Instruct the aircraft to return to the correct
final approach course when that aircraft is observed
to overshoot the turn-on or continue on a trackwhich deviates from the final approach course in the
direction of the adjacent approach course.No Change
PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO LOCALIZER/AZIMUTH COURSE,
orTURN (left/right) AND RETURN TO THE
LOCALIZER/AZIMUTH
COURSE.PHRASEOLOGY −
YOU HAVE CROSSED THE FINAL APPROACH
COURSE. TURN (left/right) IMMEDIATELY AND
RETURN TO THE FINAL APPROACH COURSE,
orTURN (left/right) AND RETURN TO THE FINAL AP-
PROACH COURSE.
2. Instruct aircraft on adjacent final approach
course to alter course to avoid the deviating aircraft
when an aircraft is observed, or in the controller’sjudgment, has deviated from the final approach
course in the direction of the adjacent approach
course.No Change
PHRASEOLOGY −
TRAFFIC ALERT, (call sign), TURN (left/right)
IMMEDIATELY HEADING (degrees), CLIMB AND
MAINTAIN (altitude)No Change
3. Terminate radar monitoring when one of the
following occurs:Delete
(a) Visual separation is applied. Delete
(b) The aircraft reports the approach lights or
runway in sight.Delete
(c) The aircraft is 1 mile or less from the
runway threshold, if procedurally required, and
contained in facility directives.Delete
4. Do not inform the aircraft when radar
monitoring is terminated.Delete
12/10/15 JO 7110.65W
Briefing Guide BG−87d. Consideration should be given to known factors
that may in any way affect the safety of the
instrument approach phase of flight whensimultaneous approaches are being conducted to
parallel runways. Factors include, but are not
limited to, wind direction/velocity, wind-shear
alerts/reports, severe weather activity, etc. Closely
monitor weather activity that could impact the final
approach course. Weather conditions in the vicinity
of the final approach course may dictate a change of
approach in use.e
. Consideration should be given to known factors
that may in any way affect the safety of the
instrument approach phase of flight whensimultaneous approaches are being conducted to
parallel runways. Factors include, but are not
limited to, wind direction/velocity, wind-shear
alerts/reports, severe weather activity, etc. Closely
monitor weather activity that could impact the final
approach course. Weather conditions in the vicinity
of the final approach course may dictate a change of
approach in use.
REFERENCE −
F AAO JO 7110.65, Para 5-1-13,Radar Service Termination.
F AAO JO 7110.65, Para 5-9-2, Final Approach Course Interception.REFERENCE −
F AAO JO 7110.65, Para 5-9-2, Final Approach Course Interception.
1. PARAGRAPH NUMBER AND TITLE: 5-9-11. TRANSITIONAL PROCEDURES
2. BACKGROUND: Current guidance permits reduced separation between aircraft on final during
simultaneous dependent, simultaneous independent, or approved same runway operations. Existing procedures
do not allow for an approved transition from reduced separation to approved separation, without a loss ofseparation that results in a low Measure of Compliance (MOC).
3. CHANGE:
OLD
NEW
5−9−11. SIMULTANEOUS INDEPENDENT
APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINAL
MONITORS5-9-11. TRANSITIONAL PROCEDURES
Add When aircraft are conducting simultaneous
dependent, independent, or any approaches
allowing for reduced separation, and one of the
aircraft executes a go-around or has its
approach clearance terminated and prior to
losing the approved reduced separation, control
instructions must be expeditiously issued to
increase separation between the applicable
aircraft. These control instructions must
establish approved separation (for example,
altitude and/or lateral separation via
divergence). In addition, wake turbulence
cautionary advisories must be issued in
accordance with FAAO JO 7110.65, Paragraph
2-1-20, Wake Turbulence Cautionary
Advisories.
Federal Aviation
AdministrationJO 7110.65W CHG 1
5/26/16
Initiated By: AJV −0
Vice President, Mission Support ServicesBRIEFING GUIDE
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL A VIATION ADMINISTRATION
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−2Table of Contents
Paragraph
NumberTitle Page
1-1-9 REQUESTS FOR INTERPRETATIONS OR CLARIFICATIONS .... BG-4
1-2-6 ABBREVIATIONS ......................................... BG-5
2-3-6 AIRCRAFT TYPE .......................................... BG-14
2-3-10 CONTROL SYMBOLOGY .................................. BG-5
2-4-17 NUMBERS USAGE ........................................ BG-5
2-5-2 NA V AID TERMS .......................................... BG-5
2-5-3 NA V AID TERMS .......................................... BG-5
2-6-2 HAZARDOUS INFLIGHT WEATHER ADVISORY SERVICE ..... BG-14
2-6-4 WEATHER AND CHAFF SERVICES .......................... BG-16
2-9-3 CONTENT ..................................................... BG-14
2-10-1 EN ROUTE SECTOR TEAM POSITION RESPONSIBILITIES ..... BG-17
2-10-2 TERMINAL RADAR/NONRADAR TEAM RESPONSIBILITIES . . . BG-172-10-3 TOWER TEAM RESPONSIBILITIES .......................... BG-18
3-3-2 CLOSED/UNSAFE RUNWAY INFORMATION .................. BG-5
3-3-7 FAR FIELD MONITOR (FFM) REMOTE STATUS UNIT .......... BG-19
3-7-5 PRECISION APPROACH CRITICAL AREA .................... BG-5
3-8-1 SEQUENCE/SPACING APPLICATION ........................ BG-20
3-9-6 SAME RUNWAY SEPARATION .............................. BG-20
3-9-9 NONINTERSECTING CONVERGING RUNWAY OPERATIONS . . . BG-21
3-10-5 LANDING CLEARANCE ................................... BG-24
4-1-1 ALTITUDE AND DISTANCE LIMITATIONS ................... BG-5
4-2-5 ROUTE OR ALTITUDE AMENDMENTS ...................... BG-25
4-3-2 DEPARTURE CLEARANCES ................................ BG-25
4-6-4 HOLDING INSTRUCTIONS ................................. BG-5
4-7-5 MILITARY TURBOJET EN ROUTE DESCENT ................. BG-5
4-7-12 AIRPORT CONDITIONS .................................... BG-26
4-7-13 SWITCHING ILS/MLS RUNWAYS ........................... BG-5
4-8-1 APPROACH CLEARANCE .................................. BG-26 & 29
4-8-9 MISSED APPROACH ...................................... BG-26
4-8-10 APPROACH INFORMATION ................................ BG-26
5-1-3 RADAR USE .............................................. BG-31
5-1-13 RADAR SERVICE TERMINATION ........................... BG-5
5-4-3 METHODS ............................................... BG-31
5-4-6 RECEIVING CONTROLLER HANDOFF ....................... BG-32
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−35-6-2 METHODS ............................................... BG-33
5-9-2 FINAL APPROACH COURSE INTERCEPTION ................. BG-5
5-9-4 ARRIV AL INSTRUCTIONS ................................. BG-5
5-9-5 APPROACH SEPARATION RESPONSIBILITY ................. BG-5
5-9-6 SIMULTANEOUS DEPENDENT APPROACHES ................ BG-5
5-9-9 SIMULTANEOUS OFFSET INSTRUMENT APPROACHES (SOIA) –
HIGH UPDATE RADAR .................................... BG-5
5-9-10 SIMULTANEOUS INDEPENDENT APPROACHES TO WIDELY-
SPACED PARALLEL RUNWAYS WITHOUT FINAL MONITORS . . BG-36
5-13-1 MONITOR ON PAR EQUIPMENT ............................ BG-5
5-13-3 MONITOR INFORMATION ................................. BG-5
7-2-1 VISUAL SEPARATION ..................................... BG-37
7-4-4 APPROACHES TO MULTIPLE RUNWAYS .................... BG-42
8-7-3 LONGITUDINAL SEPARATION ............................. BG-42
8-8-3 LONGITUDINAL SEPARATION ............................. BG-42
8-9-3 LONGITUDINAL SEPARATION ............................. BG-42
8-10-3 LONGITUDINAL SEPARATION ............................. BG-42
9-1-2 SPECIAL HANDLING ...................................... BG-47
10-2-13 MANPADS ALERT ......................................... BG-47
11-1-1 DUTY RESPONSIBILITY ................................... BG-47
11-1-2 DUTIES AND RESPONSIBILITIES ........................... BG-47
11-1-3 TIME BASED FLOW MANAGEMENT (TBFM) ................. BG-47
13-1-8 RECORDING OF CONTROL DATA ........................... BG-5
13-1-9 ACKNOWLEDGEMENT OF AUTOMATED NOTIFICATION ..... BG-50
Appendix A Aircraft Information Fixed-Wing Aircraft ........................ BG-51
Appendix B Aircraft Information Helicopters/Rotorcrafts ..................... BG-51
Appendix C Aircraft Information Specific Amateur −Built/Experimental Aircraft . . . BG-51
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−41. PARAGRAPH NUMBER AND TITLE: 1-1-9. REQUESTS FOR INTERPRETATIONS OR
CLARIFICATIONS
2. BACKGROUND: Currently, there is no defined process for the submission of interpretation or clarification
requests regarding the content of FAA Order JO 71 10.65, Air Traffic Control. This proposed change formalizes
the process as it now exists and delineates responsibilities for interpretation and clarification responses.
3. CHANGE:
OLD NEW
Add 1-1-9. REQUESTS FOR INTERPRETATIONS
OR CLARIFICATIONS TO THIS ORDER
Add a. Interpretation r equests from field air traffic
personnel must be submitted as follows:
Add 1. The r equest must be submitted, in writing,
by an Air Traffic Facility/District manager to
their Service Area Director.
Add 2. The Service Area Director must review the
request and determine if more than one
interpretation on the intent of the language can
be inferred.
Add 3. If it is determined that an interpretation is
required, the Service Area Director must submit
the request, in writing, to the Air Traffic
Procedures Directorate, for a response.
Add b. If a request does not require an
interpretation but further clarification is needed
it must be forwarded to the Service Center
Operations Support Group for a response.
Add 1. The Service Center Operations Support
Group may consult with the Air Traffic
Procedures Directorate when preparing their
response.
Add 2. The Service Center Operations Support
Group must provide a written response to the
requestor and forward the response to the Air
Traffic Procedures Directorate.
Add c. Interpretation requests from all other
sources must be submitted, in writing, to the Air
Traffic Procedures Directorate through the Air
Traffic Procedures correspondence mailbox.
Add NOTE−
Interpretations can be accessed through the Air
Traffic Control Interpretation link at the follow-
ing website:
https://my.faa.gov/org/linebusiness/ato/mis-
sion_support/air_traffic_procedures.html.
1-1-9 through 1-1-13 Renumber 1-1-10 through 1-1-14
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−51. PARAGRAPH NUMBER AND TITLE: 1-2-6. ABBREVIATIONS
2. BACKGROUND: FAA Order JO 71 10.65W added a requirement to provide 10 NM separation in front and
behind an aircraft when the data block indicates “NOWGT.” The abbreviation description for “NOWGT” was
inadvertently omitted from the new basic order.
3. CHANGE:
OLD NEW
1-2-6. ABBREVIATIONS 1-2-6. ABBREVIATIONS
Add NOWGT. No weight. The weight class or wake
category has not been determined
1. PARAGRAPH NUMBER AND TITLE:
1-2-6. ABBREVIATIONS
2-3-10. CONTROL SYMBOLOGY
2-4-17. NUMBERS USAGE2-5-2. NA V AID TERMS2-5-3. NA V AID FIXES
3-3-2. CLOSED/UNSAFE RUNWAY INFORMATION
3-7-5. PRECISION APPROACH CRITICAL AREA4-1-1. ALTITUDE AND DISTANCE LIMITATIONS4-6-4. HOLDING INSTRUCTIONS4-7-5. MILITARY TURBOJET EN ROUTE DESCENT
4-7-13. SWITCHING ILS/MLS RUNWAYS
5-1-13. RADAR SERVICE TERMINATION5-9-2. FINAL APPROACH COURSE INTERCEPTION5-9-4. ARRIV AL INSTRUCTIONS
5-9-5. APPROACH SEPARATION RESPONSIBILITY
5-9-6. SIMULTANEOUS DEPENDENT APPROACHES5-9-9. SIMULTANEOUS OFFSET INSTRUMENT APPROACHES (SOIA) – HIGH UPDATE RADAR5-13-1. MONITOR ON PAR EQUIPMENT
5-13-3. MONITOR INFORMATION
13-1-8. RECORDING OF CONTROL DATA
2. BACKGROUND: Microwave Landing System (MLS) is an all −weather, precision landing system
originally intended to replace or supplement instrument landing systems (ILS). The FAA suspended the MLS
program in 1994 in favor of the GPS (Wide Area Augmentation System WAAS). The FAA’s inventory ofinstrument flight procedures no longer includes any MLS locations.
3. CHANGE:
OLD
NEW
1-2-6. ABBREVIATIONS 1-2-6. ABBREVIATIONS
TBL 1-2-1
FAA Order JO 7110.65 AbbreviationsTBL 1-2-1
FAA Order JO 7110.65 Abbreviations
Microwave Landing System (MLS) Delete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−6OLD NEW
2−3−10. CONTROL SYMBOLOGY 2 −3−10. CONTROL SYMBOLOGY
TBL 2-3-12
Miscellaneous AbbreviationsTBL 2-3-12
Miscellaneous Abbreviations
MLS approach Delete
OLD NEW
2−4−17. NUMBERS USAGE 2 −4−17. NUMBERS USAGE
Title through k2 No Change
3. Issue MLS/ TACAN frequencies by stating the
assigned two − or three−digit channel number.3. Issue TACAN frequencies by stating the
assigned two − or three−digit channel number.
EXAMPLE −
“M−L−S channel Five Three Zero.”Delete
OLD NEW
2−5−2. NA V AID TERMS 2 −5−2. NA V AID TERMS
Title through b No Change
1.VOR/VORTAC/TACAN/MLS/ GPS
Way-point. State the name of the NA V AID or GPS
Waypoint followed by the separate digits of theradial/azimuth/bearing (omitting the word
“degrees”) and the word “radial/azimuth/bearing.”1. VOR/VORTAC/TACAN/GPS Waypoint.
State the name of the NA V AID or GPS Waypoint
followed by the separate digits of theradial/azimuth/bearing (omitting the word
“degrees”) and the word “radial/azimuth/bearing.”
EXAMPLE −
“Appleton Zero Five Zero Radial.”
“Lindburg Runway Two Seven M−L−S, Two Six Zero
Azimuth.”EXAMPLE −
“Appleton Zero Five Zero Radial.”
2. Arcs about VOR-DME/VORTAC/TACAN/
MLS NA V AIDs. State the distance in miles from
theNA V AID followed by the words “mile arc,” thedirection from the NA V AID in terms of the eight
principal points of the compass, the word “of,” and
the name of the NA V AID.2. Arcs about VOR-DME/VORTAC/TACAN
NA V AIDs. State the distance in miles from the
NA V AID followed by the words “mile arc,” thedirection from the NA V AID in terms of the eight
principal points of the compass, the word “of,” and
the name of the NA V AID.
EXAMPLE −
“Two Zero mile arc southwest of O −Hare Runway Two
Seven Left M −L−S.”EXAMPLE −
“Two Zero mile arc southwest of Kirksville VOR”
OLD NEW
2−5−3. NA V AID FIXES 2 −5−3. NA V AID FIXES
Describe fixes determined by reference to a
radial/localizer/azimuth and distance from a
VOR-DME/VORTAC/TACAN/ILS-DME or MLS
as follows:Describe fixes determined by reference to a
radial/localizer/azimuth and distance from a
VOR-DME/VORTAC/TACAN/ILS-DME as
follows:
a No Change
EXAMPLE −
“Appleton Zero Five Zero radial Three Seven mile
fix.” “Reno localizer back course Four mile fix.”
“Hobby Runway One Two M −L−S Zero Niner Zero
azimuth One Two mile fix.”EXAMPLE −
“Appleton Zero Five Zero radial Three Seven mile
fix.” “Reno localizer back course Four mile fix.”
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−7OLD NEW
3−3−2. CLOSED/UNSAFE RUNWAY
INFORMATION3−3−2. CLOSED/UNSAFE RUNWAY
INFORMATION
Title through b No Change
c. Except as permitted by para 4 −8−7, Side-step
Maneuver, where parallel runways are served by
separate ILS/MLS systems and one of the runways
is closed, the ILS/MLS associated with the closed
runway should not be used for approaches unless
not using the ILS/MLS would have an adverse
impact on the operational efficiency of the airport.c. Except as permitted by para 4 −8−7, Side-step
Maneuver, where parallel runways are served by
separate ILS systems and one of the runways isclosed, the ILS associated with the closed runway
should not be used for approaches unless not using
the ILS would have an adverse impact on the
operational efficiency of the airport.
OLD
NEW
3−7−5. PRECISION APPROACH CRITICAL
AREA3−7−5. PRECISION APPROACH CRITICAL
AREA
Title through c No Change
NOTE−
Signs and markings are installed by the airport operator
to define the ILS/MLS critical area. No point along the
longitudinal axis of the air craft is permitted past the hold
line for holding purposes. The operator is responsible to
properly position the aircraft, vehicle, or equipment at
the appropriate hold line/sign or designated point. The
requirements in p ara 3−1−12, Visually Scanning
Runways, remain valid as appropriate.NOTE−
Signs and markings are installed by the airport operator
to define the ILS critical area. No point along the
longitudinal axis of the air craft is permitted past the hold
line for holding purposes. The operator is responsible to
properly position the aircraft, vehicle, or equipment at
the appropriate hold line/sign or designated point. The
requirements in Para 3−1−12, Visually Scanning
Runways, remain valid as appropriate.
REFERENCE −
AC150/5340 −1, Standards for Airport MarkingsNo Change
OLD NEW
4−1−1. ALTITUDE AND DISTANCE
LIMITATIONS4−1−1. ALTITUDE AND DISTANCE
LIMITATIONS
When specifying a route other than an established
airway or route, do not exceed the limitations in the
table on any portion of the route which lies within
controlled airspace. (For altitude and distance
limitations, see TBL 4 −1−1, TBL 4 −1−2, TBL
4−1−3, and TBL 4 −1−4.) (For correct application of
altitude and distance limitations see FIG 4 −1−1 and
FIG 4−1−2.)When specifying a route other than an established
airway or route, do not exceed the limitations in the
table on any portion of the route which lies within
controlled airspace. (For altitude and distance
limitations, see TBL 4 −1−1, TBL 4−1−2 and TBL
4−1−3.) (For correct application of altitude and
distance limitations see FIG 4 −1−1 and FIG 4 −1−2.)
REFERENCE −
FAAO JO 7110.65, Para 4 −1−5, Fix Use.
F AAO JO 71 10.65, Para 5 −6−2, Methods.No Change
TBL 4-1-1 through TBL 4-1-3 No Change
TBL 4-1−4
MLS
Usable Height and DistanceDelete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−8Height (feet)
above transmitterDistance
(miles from transmitter)
20,000 20 (for glideslope)
20,000 20 (for azimuth)
*Use the current flight check height/altitude limitations if
different from the above minima.
OLD NEW
4−6−4. HOLDING INSTRUCTIONS 4 −6−4. HOLDING INSTRUCTIONS
Title through e No Change
NOTE−
It is mandatory for the controller to issue left or right
turns every time a holding pattern is issued for MLS.Delete
OLD NEW
4−7−5. MILITARY TURBOJET EN ROUTE
DESCENT4−7−5. MILITARY TURBOJET EN ROUTE
DESCENT
Title through b3 No Change
EXAMPLE −
“Expect ILS/MLS approach to runway eight; radar
vectors to localizer/azimuth course. Weather (reported
weather).”EXAMPLE −
“Expect ILS approach to runway eight; radar vectors
to localizer course. Weather (reported weather).”
OLD NEW
4−7−10. APPROACH INFORMATION 4 −7−10. APPROACH INFORMATION
Title through c No Change
d. Advise pilots when the ILS/MLS on the runway
in use is not operational if that ILS/MLS is on the
same frequency as an operational ILS/MLS serving
another runway.d. Advise pilots when the ILS on the runway in use
is not operational if that ILS is on the same
frequency as an operational ILS serving anotherrunway.
OLD
NEW
4−7−13. SWITCHING ILS/MLS RUNWAYS 4 −7−13. SWITCHING ILS RUNWAYS
TERMINAL No ChangeWhen a change is made from one ILS to another or
from one MLS to another at airports equipped with
multiple systems which are not used
simultaneously, coordinate with the facilities which
use the fixes formed by reference to theseNA V AIDs.When a change is made from one ILS to another at
airports equipped with multiple systems which are
not used simultaneously, coordinate with the
facilities which use the fixes formed by reference to
these NA V AIDs.
OLD
NEW
5−1−13. RADAR SER VICE TERMINATION 5 −1−13. RADAR SER VICE TERMINATION
Title through b No Change
NOTE−
1. Termination of radar monitoring when conducting
simultaneous ILS/MLS approaches is prescribed in p ara
5−9−7, Simultaneous Independent ILS/MLS
Appr oaches− Dual & Triple.NOTE−
1. Termination of radar monitoring when conducting
simultaneous ILS approaches is prescribed in Para
5−9−7, Simultaneous Independent Appr oaches− Dual &
Triple.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−9OLD NEW
5−9−2. FINAL APPROACH COURSE
INTERCEPTION5−9−2. FINAL APPROACH COURSE
INTERCEPTION
Title through a No Change
OLD
TBL 5−9−1
Approach Course Interception Angle
Distance from interception
point to approach gateMaximum interception angle
Less than 2 miles or triplesimultaneous ILS/MLS
approaches in use20 degrees
2 miles or more 30 degrees (45 degrees for helicopters)
NEW
TBL 5−9−1
Approach Course Interception Angle
Distance from interception
point to approach gateMaximum interception angle
Less than 2 miles or triplesimultaneous approaches in
use20 degrees
2 miles or more 30 degrees
(45 degrees for helicopters)
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−10OLD NEW
5−9−4. ARRIV AL INSTRUCTIONS 5 −9−4. ARRIV AL INSTRUCTIONS
Title through c1 No Change
2. Assigned an altitude to maintain until the
aircraft is established on a segment of a published
route or instrument approach procedure.(See FIG 5 −9−2 thru FIG 5 −9−4.)2. Assigned an altitude to maintain until the
aircraft is established on a segment of a published
route or instrument approach procedure.
FIG 5−9−2
Arrival InstructionsDelete
EXAMPLE −
The aircraft is being vectored to a published segment of
the MLS final approach course, 3 miles from Alpha at
4,000 feet. The MVA for this area is 4,000 feet.
“Three miles from Alpha. Turn left heading two one zero.
Maintain four thousand until established on the azimuth
course. Cleared M −L−S runway one eight appr oach.”
(See FIG 5 −9−2.)Delete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−11FIG 5−9−3
Arrival InstructionsDelete
EXAMPLE −
The aircraft is en route to Delta waypoint at 6,000 feet.
The MVA for this area is 4,000 feet. “Cross Delta at or
above four thousand. Cleared M −L−S runway one eight
approach.” (See FIG 5 −9−3.)Delete
FIG 5−9−4
Arrival InstructionsDelete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−12EXAMPLE −
The aircraft is being vectored to an MLS curved
approach, 3 miles from X-ray at 3,000 feet. “Three miles
from X-ray. Turn right heading three thr ee zer o. Maintain
three thousand until established on the azimuth course.
Cleared M −L−S runway one eight appr oach.”
(See FIG 5 −9−4.)Delete
FIG 5-9-5 Renumber to FIG 5-9-2
EXAMPLE through c2 NOTE 2 No Change
NOTE−
3. Aircraft being vectored to the intermediate fix in
FIG 5−9−5 must meet all the provisions described in
subpara 4 −8−1b4.NOTE−
3. Aircraft being vectored to the intermediate fix in
FIG 5−9−2 must meet all the provisions described in
subpara 4 −8−1h2.
d through d4 NOTE No Change
REFERENCE −
FAAO JO 7110.65, Para 5 −9−2, Final Appr oach Course
Interception. F AAO JO 7110.65, Para 5 −9−7, Simultaneous
Independent ILS/MLS Appr oaches− Dual & Triple.REFERENCE −
F AAO JO 71 10.65, Para 5 −9−2, Final Appr oach Course
Interception. F AAO JO 7110.65, Para 5 −9−7, Simultaneous
Independent Appr oaches− Dual & Triple
e. Where a T erminal Arrival Area (TAA) has been
established to support RNA V approaches, inform
the aircraft of its position relative to the appropriateIAF and issue the approach clearance. (See FIG
5−9−6
.)e. Where a T erminal Arrival Area (TAA) has been
established to support RNA V approaches, inform
the aircraft of its position relative to the appropriateIAF and issue the approach clearance. (See FIG
5−9−3
.)
EXAMPLE 1 through EXAMPLE 3 No Change
FIG 5-9-6 Renumber to FIG 5-9-3
OLD NEW
5−9−5. APPROACH SEPARATION
RESPONSIBILITY5−9−5. APPROACH SEPARATION
RESPONSIBILITY
Title through b No Change
REFERENCE −
FAAO JO 7110.65, Para 5 −4−6, Receiving Contr oller Handoff.
F AAO JO 71 10.65, Para 5 −9−2, Final Appr oach Course
Interception. F AAO JO 7110.65, Para 5 −9−6, Parallel Dependent
ILS/MLS Approaches.
F AAO JO 71 10.65, Para 6 −7−2, Appr oach Sequence.REFERENCE −
F AAO JO 71 10.65, Para 5 −4−6, Receiving Contr oller Handoff.
F AAO JO 71 10.65, Para 5 −9−2, Final Appr oach Course
Interception. F AAO JO 7110.65, Para 5 −9−6, Simultaneous
Dependent Approaches.
F AAO JO 71 10.65, Para 6 −7−2, Appr oach Sequence.
OLD NEW
5−9−6. SIMULTANEOUS DEPENDENT
APPROACHES5−9−6. SIMULT ANEOUS DEPENDENT
APPROACHES
Title through a2 No Change
FIG 5-9-7 Renumber to FIG 5-9-4
EXAMPLE −
In FIG 5−9−7, Aircraft 2 is 1.0 mile from Aircraft 1.
Approved radar separation must be maintained between
Aircraft 1 and Aircraft 3.EXAMPLE −
In FIG 5−9−4, Aircraft 2 is 1.0 mile from Aircraft 1.
Approved radar separation must be maintained between
Aircraft 1 and Aircraft 3.
a3 No Change
FIG 5-9-8 Renumber to FIG 5-9-5
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−13EXAMPLE −
In FIG 5−9−8, Aircraft 2 is 1.5 miles from Aircraft 1, and
Aircraft 3 is 1.5 miles or more from Aircraft 2. Appr oved
radar separation must be maintained between air craft on
the same final.EXAMPLE −
In FIG 5−9−5, Aircraft 2 is 1.5 miles from Aircraft 1, and
Aircraft 3 is 1.5 miles or more from Aircraft 2. Appr oved
radar separation must be maintained between air craft on
the same final.
a4 No Change
FIG 5-9-9 Renumber to FIG 5-9-6
EXAMPLE −
In FIG 5−9−9, Aircraft 2 is 2 miles from heavy Aircraft 1.
Aircraft 3 is a small aircraft and is 6 miles from Aircraft
1. *The resultant separation between Aircraft 2 and 3 isat least 4.2 milesEXAMPLE −
In FIG 5−9−6
, Aircraft 2 is 2 miles from heavy Aircraft 1.
Aircraft 3 is a small aircraft and is 6 miles from Aircraft
1. *The resultant separation between Aircraft 2 and 3 isat least 4.2 miles
OLD NEW
5−9−9. SIMULTANEOUS OFFSET
INSTRUMENT APPROACHES (SOIA) −
HIGH UPDATE RADAR5−9−9. SIMULT ANEOUS OFFSET
INSTRUMENT APPROACHES (SOIA) −
HIGH UPDATE RADAR
Title through g3 No Change
4. Issue all applicable wake turbulence
advisories.4. Issue all applicable wake turbulence
advisories.
REFERENCE −
F AAO JO 8260.49, Para 13.0, Wake Turbulence Requirements.
FAAO JO 7210.3, Para 10 −4−6, Simultaneous ILS/MLS Approaches.
F AAO JO 71 10.65, Para 2 −1−20, W ake Turbulence Cautionary
Advisories.
F AAO JO 71 10.65, Para 5 −5−4 , MinimaREFERENCE −
F AAO JO 8260.49, Para 13.0, Wake Turbulence Requirements.
FAAO JO 7210.3, Para 10 −4−6, Simultaneous Independent
Approaches.
F AAO JO 71 10.65, Para 2 −1−20, W ake Turbulence Cautionary
Advisories.
F AAO JO 71 10.65, Para 5 −5−4 , Minima
OLD NEW
5−13−1. MONITOR ON PAR EQUIPMENT 5 −13−1. MONITOR ON PAR EQUIPMENT
Title to NOTE No Change
NOTE−
1. The provisions of this section do not apply to
monitoring simultaneous ILS, MLS, or ILS and MLS
approaches.NOTE−
1. The provisions of this section do not apply to
monitoring simultaneous approaches.
NOTE 2 through 2c No Change
REFERENCE −
FAAO JO 7110.65, Para 5 −9−7, Simultaneous Independent ILS/MLS
Appr oaches− Dual & Triple.REFERENCE −
F AAO JO 7110.65, Para 5 −9−7, Simultaneous Independent
Appr oaches− Dual & Triple.
OLD NEW
5−13−3. MONITOR INFORMATION 5 −13−3. MONITOR INFORMATION
Title through e No Change
f. Provide azimuth monitoring only at locations
where the MLS glidepath and the PAR glidepath are
not coincidental.Delete
REFERENCE −
FAAO JO 7110.65, Para 5 −1−13, Radar Service Termination.Delete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−14OLD NEW
13−1−8. RECORDING OF CONTROL DATA 13 −1−8. RECORDING OF CONTROL DATA
Title through e NOTE No Change
TBL 13−1−2
Miscellaneous AbbreviationsTBL 13−1−2
Miscellaneous Abbreviations
MLS - MLS approach Delete
TBL 13−1−3
EDST Equivalents for Control Information
SymbolsTBL 13−1−3
EDST Equivalents for Control Information
Symbols
ARC mi. dir.− DME arc of VORTAC, TACAN, or
MLSARC mi. dir. − DME arc of VORTAC or TACAN
1. PARAGRAPH NUMBER AND TITLE: 2−3−6. AIRCRAFT TYPE
2. BACKGROUND: The International Civil Aviation Organization (ICAO) formulates aircraft type
designators for the world’s aircraft that will most likely receive air traffic services. ICAO provides this
information through ICAO Document 8643, Aircraft Type Designators, which is updated at least annually. FAA
supplements the ICAO information and publishes it through two documents: FAA Order JO 7340.2,Contractions, and FAA Order JO 7110.65, Air Traffic Control. These FAA documents didn’t contain all the
aircraft listed by ICAO and the FAA documents contained dissimilar information.
3. CHANGE:
OLD
NEW
2−3−6. AIRCRAFT TYPE 2 −3−6. AIRCRAFT TYPE
Use the approved codes listed in Appendix A
through C to indicate aircraft type.Use the approved aircraft type designator, in
accordance with FAA Order 7360.1, Aircraft
Type Designators.
1. PARAGRAPH NUMBER AND TITLE:
2-6-2. HAZARDOUS INFLIGHT WEATHER ADVISORY SERVICE
2-9-3. CONTENT
2. BACKGROUND: The proposed change to realign the En Route Flight Advisory Service (EFAS), known as
“Flight W atch” in air-to-ground communications, to the Inflight position is part of an effort by Flight Service to
modernize and streamline service delivery in order to increase efficiencies and value for its stakeholders. WhenEFAS was introduced in 1972, EFAS specialists received advanced training in aviation weather which included
translating data received from radar and satellite displays. At the time, only flight service stations providing
EFAS services had access to these products. Currently, all CONUS flight service specialists have access tocommon weather displays, such as radar and satellite imagery, as well as other weather products which werepreviously available only to EFAS specialists. Today, a pilot contacting Flight Watch for updated weatherinformation is not able to obtain NOTAM information or flight planning services and must contact Flight Service
on a different frequency. With this new approach, a pilot can obtain all services that Flight Service has to offer
with one call. The elimination of overlapping services will allow for a smarter, more strategic allocation oflimited resources.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−153. CHANGE:
OLD NEW
2−6−2. HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE (HIWAS)2−6−2. HAZARDOUS INFLIGHT WEATHER
ADVISORY SERVICE (HIWAS)
Title through a NOTE No Change
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT. HAZARDOUS
WEATHER INFORMATION (SIGMET, Convective
SIGMET, AIRMET, Urgent Pilot Weather Report (UUA),
or Center Weather Advisory (CWA), Number orNumbers) FOR (geographical area) AVAILABLE ON
HIWAS, FLIGHT WATCH
, OR FLIGHT SERVICE
FREQUENCIES.PHRASEOLOGY −
ATTENTION ALL AIRCRAFT. HAZARDOUS
WEATHER INFORMATION (SIGMET, Convective
SIGMET, AIRMET, Urgent Pilot Weather Report (UUA),
or Center Weather Advisory (CWA), Number orNumbers) FOR (geographical area) AVAILABLE ON
HIWAS OR FLIGHT SERVICE FREQUENCIES.
b. Controllers outside of commissioned HIWAS
areas must:b. Controllers outside of commissioned HIWAS
areas must:
1. Advise pilots of the availability of hazardous
weather advisories. Pilots requesting additional
information should be directed to contact thenearest Flight Watch or
Flight Service.1. Advise pilots of the availability of hazardous
weather advisories. Pilots requesting additional
information should be directed to contact thenearest Flight Service.
b2 No Change
PHRASEOLOGY −
ATTENTION ALL AIRCRAFT. HAZARDOUS WEATH-
ER INFORMATION FOR (geographical area) AVAIL-
ABLE FROM FLIGHT WATCH OR FLIGHT SERVICE.PHRASEOLOGY −
ATTENTION ALL AIRCRAFT. HAZARDOUS WEATH-
ER INFORMATION FOR (geographical area) AVAIL-
ABLE FROM FLIGHT SERVICE.
OLD NEW
2−9−3. CONTENT 2 −9−3. CONTENT
Title through l No Change
m. Instructions for the pilot to acknowledge
receipt of the ATIS message by informing the
controller on initial contact.No Change
EXAMPLE −
“Boston Tower Information Delta. One four zero zero
Zulu. Wind two five zero at one zero. Visibility one zero.
Ceiling four thousand five hundred broken. T emperature
three four. Dew point two eight. Altimeter three zero onezero. ILS−DME Runway Two Seven Approach in use.
Departing Runway Two Two Right. Hazardous Weather
Information for (geographical area) available onHIWAS, Flight Watch,
or Flight Service Frequencies.
Advise on initial contact you have Delta.”EXAMPLE −
“Boston Tower Information Delta. One four zero zero
Zulu. Wind two five zero at one zero. Visibility one zero.
Ceiling four thousand five hundred broken. T emperature
three four. Dew point two eight. Altimeter three zero onezero. ILS−DME Runway Two Seven Approach in use.
Departing Runway Two Two Right. Hazardous Weather
Information for (geographical area) available onHIWAS or Flight Service Frequencies. Advise on initialcontact you have Delta.”
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−161. PARAGRAPH NUMBER AND TITLE: 2-6-4. WEATHER AND CHAFF SERVICES
2. BACKGROUND: Instrument flight procedures with published crossing restrictions have been in use for
many years. Continued evolution and expanded use of these procedures results in the need to clarify the actions
required when an aircraft is issued a clearance to deviate for weather off a procedure that contains publishedaltitude restrictions. Existing guidance does not capture the need to issue an altitude to maintain after aircraft are
cleared to deviate from Climb Via or Descend V ia clearances, or even the need to issue an altitude when deviating
after a basic crossing altitude has been issued. Without an assigned altitude or a published fix to rejoin, Flight
Management Systems may no longer process crossing altitudes and in the case of Climb or Descend Viaclearances, VNA V may revert to a SID/STAR’s top or bottom altitude.
3. CHANGE:
OLD
NEW
2-6-4 WEATHER AND CHAFF SERVICES 2-6-4 WEATHER AND CHAFF SERVICES
Title through g1 No Change
Add 2. When approving a weather deviation for
an aircraft that had pr eviously been issued a
crossing altitude, including Climb Via or
Descend Via clearances, issue an altitude to
maintain along with the clearance to deviate. If
you intend on clearing the aircraft to r esume the
procedure, advise the pilot.
Add PHRASEOLOGY −
DEVIATION (restrictions if necessary) APPROVED,
MAINTAIN (altitude), (if applicable) EXPECT TO
RESUME (SID, STAR, etc.) AT (NAVAID, fix,
waypoint)
Add NOTE−
After a Climb Via or Descend Via clearance has been
issued, a vector/deviation off of a SID/STAR cancels the
altitude restrictions on the procedure. The aircraft’s
Flight Management System (FMS) may be unable to
process crossing altitude restrictions once the aircraft
leaves the SID/STAR lateral path. Without an assigned
altitude, the aircraft’s FMS may revert to leveling off at
the altitude set by the pilot, which may be the
SID/STAR’s published top or bottom altitude.
Add REFERENCE −
FAAO JO 7110.65, Para 4-2-5, Route or Altitude Amendments
FAAO JO 7110.65, Para 5-6-2, Methods
g2 through g4 Renumber g3 through g5
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−171. PARAGRAPH NUMBER AND TITLE: 2-10-1. EN ROUTE SECTOR TEAM POSITION RESPONS-
IBILITIES
2. BACKGROUND: In support of the AT O positive safety culture, several changes are being made to sections
in this Order and in FAA Order JO 7210.3, Facility Operations and Administration, to shift away from allusions to
“blame” and remove terms such as “operational error/deviation.” This change also clarifies the same concept
may be applied to en route or oceanic sector teams.
3. CHANGE:
OLD NEW
2-10-1. EN ROUTE SECTOR TEAM
POSITION RESPONSIBILITIES2-10-1. EN ROUTE OR OCEANIC SECTOR
TEAM POSITION RESPONSIBILITIES
a. En Route Sector Team Concept and Intent: a. En Route or Oceanic Sector T eam Concept and
Intent: There are no absolute divisions of
responsibilities regarding position operations.
The tasks to be completed remain the same
whether one, two, or three people are working
positions within a sector. The team, as a whole,
has responsibility for the safe and efficient
operation of that sector.
1. There are no absolute divisions of
responsibilities regarding position operations. The
tasks to be completed remain the same whether one,
two, or three people are working positions within a
sector. The team, as a whole, has responsibility for
the safe and efficient operation of that sector.Delete
2. The intent of the team concept is not to hold
the team accountable for the action of individual
members, in the event of an operational accident/
incident.Delete
1. PARAGRAPH NUMBER AND TITLE: 2-10-2. TERMINAL RADAR/NONRADAR TEAM
RESPONSIBILITIES
2. BACKGROUND: In support of the AT O positive safety culture, several changes are being made to sections
in this Order and in FAA Order JO 7210.3, Facility Operations and Administration, to shift away from allusions to
“blame” and to remove terms such as “operational error/deviation.”
3. CHANGE:
OLD NEW
2-10-2. TERMINAL RADAR/NONRADAR
TEAM RESPONSIBILITIES2-10-2. TERMINAL RADAR/NONRADAR
TEAM RESPONSIBILITIES
a. Terminal Radar Team Concept and Intent: a. Terminal Radar Team Concept and Intent:
There are no absolute divisions of
responsibilities regarding position operations.
The tasks to be completed remain the same
whether one, two, or three people are working
positions within a facility/sector. The team, as a
whole, has responsibility for the safe and
efficient operation of that facility/sector.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−181. There are no absolute divisions of
responsibilities regarding position operations. The
tasks to be completed remain the same whether one,
two, or three people are working positions within a
facility/sector. The team, as a whole, has
responsibility for the safe and efficient operation of
that facility/sector.Delete
2. The intent of the team concept is not to hold
the team accountable for the action of individual
members in the event of an operational
error/deviation .Delete
1. PARAGRAPH NUMBER AND TITLE: 2-10-3. TOWER TEAM RESPONSIBILITIES
2. BACKGROUND: This change reflects support of the ATO positive safety culture. In keeping with that
culture, several changes are being made to sections in this Order and in FAA Orde r JO 7210.3, Facility Operation
and Administration, to shift away from allusions to “blame” and to remove terms such as “operational
error/deviation.”
3. CHANGE:
OLD NEW
2−10−3. TOWER TEAM
RESPONSIBILITIES2−10−3. TOWER TEAM
RESPONSIBILITIES
a. Tower Team Concept and Intent: a. Tower Team Concept and Intent: There are no
absolute divisions of responsibilities regarding
position operations. The tasks to be completed
remain the same whether one, two, or three
people are working positions within a
facility/sector. The team, as a whole, has
responsibility for the safe and efficient operation
of that facility/sector.
1. There are no absolute divisions of
responsibilities regarding position operations. The
tasks to be completed remain the same whether one,
two, or three people are working positions within a
facility/sector. The team, as a whole, has
responsibility for the safe and efficient operation of
that facility/sector.Delete
2. The intent of the team concept is not to hold
the team accountable for the action of individual
members in the event of an operational
error/deviation .Delete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−191. PARAGRAPH NUMBER AND TITLE: 3-3-7. FAR FIELD MONITOR (FFM) REMOTE STATUS
UNIT
2. BACKGROUND: A change in CFR 14 Section 91.175 (k) published in 2005 eliminated the need for middle
markers as a component for an Instrument Landing System (ILS). Meanwhile, Flight Standards Service policyallows for the elimination of outer markers (OM) and inner markers (IM) where they no longer serve theiroriginal need. Many of these NA VAIDS have since been decommissioned. It has become necessary to revise FAA
Order JO 7110.65, Para 3-3-7, FAR FIELD MONITOR (FFM) REMOTE STATUS UNIT to reflect these
changes.
3. CHANGE:
OLD
NEW
3-3-7. FAR FIELD MONITOR (FFM)
REMOTE STATUS UNIT3-3-7. FAR FIELD MONITOR (FFM)
REMOTE STATUS UNIT
Title through e No Change
1. The aircraft is outside the middle marker
(MM), check for encroachment those portions of
the critical area that can be seen from the tower. Itis understood that the entire critical area may not be
visible due to low ceilings and poor visibility. The
check is strictly to determine possible causal factors
for the out-of-tolerance situation. If the alarm has
not cleared prior to the aircraft’s arriving at the MM
,
immediately issue an advisory that the FFM remote
status sensing unit indicates the localizer is
unreliable.1. The aircraft is outside the middle marker
(MM) or in the absence of a MM, 1/2 mile final,
check for encroachment of those portions of the
critical area that can be seen from the tower. It is
understood that the entire critical area may not be
visible due to low ceilings and poor visibility. The
check is strictly to determine possible causal factors
for the out-of-tolerance situation. If the alarm hasnot cleared prior to the aircraft’ s arriving at the MM
or in the absence of a MM, 1/2 mile final,
immediately issue an advisory that the FFM remote
status sensing unit indicates the localizer is
unreliable.
2. The aircraft is between the MM and the inner
marker (IM), immediately issue an advisory that the
FFM remote status sensing unit indicates thelocalizer is unreliable.2. The aircraft is between the MM or 1/2 mile
final and the inner marker (IM) , or if the IM is not
installed, the CAT II Missed Approach Point
(MAP), immediately issue an advisory that the
FFM remote status sensing unit indicates the
localizer is unreliable.
PHRASEOLOGY No Change
3. The aircraft has passed the IM, there is no
action requirement. Although the FFM has been
modified with filters which dampen the effect offalse alarms, you may expect alarms when aircraft
are located between the FFM and the localizer
antenna either on landing or on takeoff.3. The aircraft has passed the IM or the CAT II
MAP (if the IM is not installed) there is no action
requirement. Although the FFM has been modified
with filters which dampen the effect of false alarms,
you may expect alarms when aircraft are located
between the FFM and the localizer antenna either
on landing or on takeoff.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−201. PARAGRAPH NUMBER AND TITLE: 3-8-1. SEQUENCE/SPACING APPLICATION
2. BACKGROUND: The following is a response to the Runway Safety Group Root Cause Analysis Team
review of a runway incursion event at Kansas City Downtown (KMKC). The cause was a helicopter pilot that
elected to hover over the runway after being issued a cleared for the option.
3. CHANGE:
OLD NEW
3−8−1. SEQUENCE/SP ACING
APPLICATION3−8−1. SEQUENCE/SP ACING
APPLICATION
Title through PHRASEOLOGY No Change
NOTE−
1. The “Cleared for the Option” pr ocedure will permit an
instructor pilot/flight examiner/pilot the option to make
a touch-and-go, low approach, missed approach,stopand-go, or full stop landing. This pr ocedure will only
be used at those locations with an operational control
tower and will be subject to ATC approval.NOTE−
1. The “Cleared for the Option” pr ocedure will permit an
instructor pilot/flight examiner/pilot the option to make
a touch-and-go, low approach, missed approach,stop-and-go, or full stop landing. This procedure willonly be used at those locations with an operational
control tower and will be subject to ATC appr oval. After
ATC approval of the option, the pilot should inform
ATC as soon as possible of any delay on the runway
during their stop-and-go or full stop landing.
NOTE 2 and NOTE 3 No Change
Add REFERENCE −
F AAO JO 7110.65, Para 3 −7−2, Taxi and Ground Movement
Operations.
AIM, Para 4 −3−22, Option Approac h
1. PARAGRAPH NUMBER AND TITLE: 3-9-6. SAME RUNWAY SEPARATION
2. BACKGROUND: Paragraph 3-9-6 refers to departing aircraft and how to separate a departing aircraft from
previous departing or arriving aircraft. In subparagraph “a” references are made to FIG 3-9-1 and FIG 3-9-2 and
both of these figures show the departure aircraft on the runway, shaded, with the previous departing aircraft
depicted in outline form. In subparagraph “b” a reference is made to FIG 3-9-3 that is intended to depict adeparting aircraft from a preceding arriving aircraft. The preceding arriving aircraft is correctly depicted inoutline form, consistent with previous figures in this chapter. However, while the departure is shaded consistent
with the two previous figures in this chapter, it is not depicted on the runway.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−213. CHANGE:
OLD NEW
3-9-6. SAME RUNWAY SEPARATION 3-9-6. SAME RUNWAY SEPARATION
Title through a
FIG 3−9−2
Same Runway SeparationNo Change
NOTE−
Aircraft same runway separation (SRS) categories are
specified in Appendices A, B, and C and based upon the
following definitions:
CATEGORY I /C0042 small aircraft weighing 12,500 lbs. or
less, with a single propeller driven engine , and all
helicopters.
CATEGORY II /C0042 small aircraft weighing 12,500 lbs. or
less, with propeller driven twin /C0042engines .
CATEGORY III /C0042 all other aircraft.NOTE−
Aircraft same runway separation (SRS) categories are
specified in FAA Order JO 7360.1, Aircraft Type
Designators and based upon the following definitions:
CATEGORY I /C0042 small single−engine propeller driven
aircraft weighing 12,500 lbs. or less, and all helicopters.
CATEGORY II /C0042 small twin−engine propeller driven
aircraft weighing 12,500 lbs. or less.
CATEGORY III /C0042 all other aircraft.
OLD
FIG 3−9−3
Preceding Landing Aircraft Clear of Runway
NEW
FIG 3−9−3
Preceding Landing Aircraft Clear of Runway
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−221. PARAGRAPH NUMBER AND TITLE: 3-9-9. NONINTERSECTING CONVERGING RUNWAY
OPERATIONS
2. BACKGROUND: The placement of paragraph 3-9-9, 2e may result in the conclusion that the procedures
are only required for operations requiring wake turbulence application. In fact, the provisions of this paragraphshould be applied for all converging runway operations.
3. CHANGE:
OLD
NEW
3-9-9. NONINTERSECTING CONVERGING
RUNWAY OPERATION3-9-9. NONINTERSECTING CONVERGING
RUNWAY OPERATION
Title through a2
FIG−3−9−12
Intersecting Runway SeparationNo Change
Add b. If the extended centerline of a runway
crosses a converging runway or the extended
centerline of a converging runway at a distance
of 1NM or less from either departure end, apply
the provisions of Pragraph 3 −9−8, Intersecting
Runway Separation, unless: The facility is using
aids specified in a facility directive, (may include
but are not limited to, Arrival/Departure
Window (ADW), ASDE −X Virtual Runway
Intersection Point (VRIP), cut −off points or
automation). (See FIG 3 −9−15 and FIG 3 −9−16).
Add REFERENCE −
FAAO JO 7210.3, Para 10-3-14, Go-Around/Missed Approach
WAKE TURBULENCE APPLICATION No Change
Add FIG 3−9−13
Intersecting Runway Separation
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−23Add FIG 3−9−14
Intersecting Runway Separation
b. Separate IFR/VFR aircraft taking off behind a
departing aircraft on a crossing runway if projected
flight paths will cross (See FIG 3 −9−13).c. Separate IFR/VFR aircraft taking off behind a
departing aircraft on a crossing runway if projected
flight paths will cross (See FIG 3 −9−15).
1. Heavy, large, or small behind super − 3
minutes.No Change
2. Heavy, large, or small behind heavy − 2
minutes.No Change
3. Small behind B757 − 2 minutes. No Change
FIG 3−9−13
Intersecting Runway SeparationFIG 3−9−15
Intersecting Runway Separation
NOTE−
Takeoff clearance to the following aircraft should not be
issued until the time interval has passed from when the
preceding aircraft began takeoff roll.No Change
c. Separate IFR/VFR aircraft departing behind a
landing aircraft on a crossing runway if the
departure will fly through the airborne path of thearrival (See FIG 3 −9−14
).d. Separate IFR/VFR aircraft departing behind a
landing aircraft on a crossing runway if the
departure will fly through the airborne path of thearrival (See FIG 3 −9−16
).
1. Heavy, large, or small behind super – 3
minutes.No Change
2. Heavy, large, or small behind heavy – 2
minutes.No Change
3. Small behind B757 – 2 minutes. No Change
FIG 3−9−14
Intersecting Runway SeparationFIG 3−9−16
Intersecting Runway Separation
d. Do not approve pilot requests to deviate from
the required time interval if the preceding aircraft
requires wake turbulence separation.e. Do not approve pilot requests to deviate from
the required time interval if the preceding aircraft
requires wake turbulence separation.
REFERENCE −
F AAO JO 7110.65, Para 5-8-3, Successive or Simultaneous
Departures.F AAO JO 7110.65, Para 5-8-5, Departures and Arrivals on Parallel
or Nonintersecting Diverging Runways.
F AAO JO 7110.65, Para 5-5-4, Minima, Subparagraph g.No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−24e. If the extended centerline of a runway crosses
a converging runway or the extended centerline of
a converging runway at a distance of 1NM or less
from either departure end, apply the provisions of
Paragraph 3-9-8, Intersecting Runway Separation,
unless: The facility is using aids specified in a
facility directive, (may include but are not limited
to, Arrival/Departure Window (ADW), ASDE-X
Virtual Runway Intersection Point (VRIP), cut-off
points or automation). (See FIG 3-9-15 and FIG
3-9-16.)Delete
FIG 3−9−15
Intersecting Runway SeparationDelete
FIG 3−9−16
Intersecting Runway SeparationDelete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−251. PARAGRAPH NUMBER AND TITLE: 3-10-5. LANDING CLEARANCE
2. BACKGROUND: Airport traffic control towers responsible for sequencing arriving aircraft employ
various techniques to establish a landing sequence. Occasionally, control instructions necessary to sequence
aircraft are not compatible with the phraseology “CONTINUE” specified in the example in FAA Order JO7110.65 paragraph 3-10-5. Examples of incompatible phraseology with the word “CONTINUE” include:“EXTEND DOWNWIND, TURN BASE NOW, TURN BASE IN ONE MILE, BASE APPROVED, MAKE
LEFT THREE-SIXTY”, etc. When an inbound aircraft is issued a restriction such as “TOWER WILL CALL
BASE” and a controller subsequently issues the instruction “CONTINUE, TRAFFIC HOLDING IN
POSITION”, pilots have reported uncertainty on the meaning of “CONTINUE” in this situation. Some pilotsbelieve it means continue flying the current leg of the traffic pattern, some think it means fly a normal pattern.
Similarly, some controllers report being unsure whether instructing an aircraft to “CONTINUE” deletes a
previously issued control instruction.
3. CHANGE:
OLD
NEW
3−10−5. LANDING CLEARANCE 3 −10−5. LANDING CLEARANCE
Title through b2c No Change
EXAMPLE −
“Delta One, Runway One −Eight, continue, traffic
holding in position.”
“Delta One, Runway One −Eight, cleared to land.
Traffic holding in position.”EXAMPLE −
“Delta One, Runway One −Eight, continue, traffic
holding in position.”
“Delta One, Runway One −Eight, cleared to land.
Traffic holding in position.”“Twin Cessna Four Four Golf, Runway One-Niner
base approved, traffic holding in position.”
“Baron Two Five Foxtrot, Runway One-Niner Right
extend downwind, tower will call your base, traffic
holding in position.”
1. PARAGRAPH NUMBER AND TITLE: 4-2-5. ROUTE OR ALTITUDE AMENDMENTS
2. BACKGROUND: Flight Standards Service recommends 4-2-5b, Note 2 be stated better to avoid any
potential misinterpretation. It is not a good idea to have “mandatory” used in the same sentence with “crossing
altitudes.” This could potentially mislead the audience into believing all altitudes on an ODP are “mandatoryaltitudes,” as opposed to what is correctly specified in the ODP text or graphic.
3. CHANGE:
OLD
NEW
4-2-5. ROUTE OR ALTITUDE
AMENDMENTS4-2-5. ROUTE OR ALTITUDE
AMENDMENTS
Title through b NOTE 1 No Change
2. Crossing altitudes and speed restrictions on
ODPs are mandatory and cannot be canceled by
ATC.2. Crossing altitudes and speed restrictions on
Obstacle Departure Procedure/s ( ODP /s) cannot
be canceled or amended by ATC.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−261. PARAGRAPH NUMBER AND TITLE: 4-3-2. DEPARTURE CLEARANCES
2. BACKGROUND: Flight Standards Service (AFS-420) has identified that paragraph 4-3-2 (c) (2) only
refers to textually described obstacle departure procedures (ODP).
3. CHANGE:
OLD NEW
4-3-2. DEPARTURE CLEARANCES 4-3-2. DEPARTURE CLEARANCES
Title through c1(c) No Change
2. Where only textually described obstacle
departure procedures (ODP) have been published
for a location and pilot compliance is necessary toensure separation, include the procedure as part of
the ATC clearance.2. Where an
obstacle departure procedure
(ODP) has been published for a location and pilot
compliance is necessary to ensure separation,include the procedure as part of the ATC clearance.
Add
EXAMPLE −
“Depart via the (airport name)(runway number)
departure procedure.”
Or
“Depart via the (graphic ODP name) obstacle
departure procedure.”
Add NOTE−
Some aircraft are required by 14 CFR 91.175 to depart
a runway under IFR using the ODP absent other
instructions from ATC.
Add NOTE−
IFR takeoff minimums and obstacle departure
procedures are prescribed for specific airports/runways
and published in either a textual, or graphic form with
the label (OBSTACLE) in the procedure title, and
documented on an appropriate FAA Form 8260. To
alert pilots of their existence, instrument approach
procedure charts are annotated with a symbol:
Add
3. Do not solicit use of the Visual Climb over
Airport (VCOA) option.No Change
NOTE−
Pilots will specifically advise ATC of their intent to use
the VCOA option.No Change
EXAMPLE −
“Depart via the (airport name) (runway number)
departure procedure.”Delete
NOTE−
IFR takeoff minimums and departure procedures are
prescribed for specific airports/runways and published
in a tabular form supplement to the F AA instrument
approach procedure chart and appropriate F AA Form
8260. These procedures are identified on instrument
approach procedure charts with a symbol:Delete
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−27
Delete
1. PARAGRAPH NUMBER AND TITLE:
4-7-12. AIRPORT CONDITIONS
4-8-1. APPROACH CLEARANCE
4-8-9. MISSED APPROACH4-8-10. APPROACH INFORMATION
2. BACKGROUND: In response to aviation industry concerns over cold weather effect on indicated altitudes
versus that of an aircraft’s true altitude, the FAA completed an analysis to determine if current 14 CFR Part 97
instrument approach procedures in the United States National Airspace System are at risk of compromised
required obstacle clearances (ROC) during time of extreme cold temperature. As a result of the study, all airports
with runways greater than 2500 feet with instrument approach procedures were analyzed to determine whichapproach procedures needed compensation based on a formula that articulated the potential for a degree of ROC
that could be compromised. A safety risk management panel (SRMP) was conducted on the impact to ATC
operations, and a condition of the SRMP was to add content to the pertinent FAA documents to assist in pilot and
controller awareness of the need to apply cold temperature compensation.
3. CHANGE:
OLD
NEW
4−7−12. AIRPORT CONDITIONS 4 −7−12. AIRPOR T CONDITIONS
Title through a No Change
NOTE−
1. Airport conditions information, in the provision of en
route approach control service, does not include
information pertaining to the airport surfaceenvironment other than the landing area(s) orobstruction information for aircraft that will be cleared
for an instrument approach. Accordingly, D NOTAMs
that contain the keywords TAXIWAY (TWY), RAMP ,APRON, or SERVICE (SVC) are not required to beissued. Additionally, Obstruction NOTAMs (OBST) are
not required to be issued if an aircraft will be cleared for
an instrument approach.NOTE−
1. Airport conditions information, in the provision of en
route approach control service, does not include
information pertaining to cold temperature
compensation or the airport surface environment other
than the landing area(s) or obstruction information for
aircraft that will be cleared for an instrument approach.
Accordingly, D NOTAMs that contain the keywordsTAXIWAY (TWY), RAMP , APRON, or SERVICE (SVC)are not required to be issued. Additionally, Obstruction
NOTAMs (OBST) are not required to be issued if an
aircraft will be cleared for an instrument approach.
NOTE
2 through b No Change
OLD NEW
4−8−1. APPROACH CLEARANCE 4 −8−1. APPROACH CLEARANCE
Title through a5 No Change
Add 6. Controllers must not disapprove a pilot
request to cold temperature compensate in
conjunction with the issuance of an approach
clearance.
NOTE 1 No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−282. Approach clearances are issued based on known
traffic. The receipt of an approach clearance does not
relieve the pilot of his/her responsibility to comply with
applicable Parts of Title 14 of the Code of Federal
Regulations and the notations on instrument approachcharts which levy on the pilot the r esponsibility to comply
with or act on an instruction; for example, “Straight-in
minima not authorized at night,” “Procedure notauthorized when glideslope/glidepath not used,” “Use of
procedure limited to aircraft authorized to use airport,”
or
“Procedure not authorized at night.”2. Approach clearances are issued based on known
traffic. The receipt of an approach clearance does not
relieve the pilot of his/her responsibility to comply with
applicable Parts of Title 14 of the Code of Federal
Regulations and the notations on instrument approachcharts which levy on the pilot the r esponsibility to comply
with or act on an instruction; for example, “Straight-in
minima not authorized at night,” “Procedure notauthorized when glideslope/glidepath not used,” “Use of
procedure limited to aircraft authorized to use airport,”
“Procedure not authorized at night,” or Snowflake icon
with associated temperature.
NOTE 3 through NOTE 9 No Change
Add 10. Pilots are required to advise ATC when intending to
apply cold temperature compensation to instrument
approach segments. Pilots must advise ATC of the
amount of compensation required for each affected
segment on initial contact or as soon as possible. Pilots
are not required to advise ATC when correcting on the
final segment only. Controllers may delay the issuance
of an approach clearance to comply with approved
separation requirements when informed that a pilot will
apply cold temperature compensation (CTC). Pilots will
not apply altitude compensation, unless authorized,
when assigned an altitude prior to an approach
clearance. Consideration should be given to vectoring
aircraft at or above the requested compensating altitude
if possible. This eliminates pilots having to climb once
on the approach.
REFERENCE −
F AAO 8260.3, United States Standard for Terminal Instrument
Procedures (TERPS).REFERENCE −
F AAO 8260.3, United States Standard for Terminal Instrument
Procedures (TERPS). P/CG Term – Cold Temperature Compensation
AIM, Paragraph 5-1-17, Cold Temperature Operations
AIM, Paragraph 5-5-4, Instrument Approach
OLD NEW
4-8-9. MISSED APPROACH 4-8-9. MISSED APPROACH
Title through NOTE 2 No Change
Add NOTE−
3. Pilots must advise ATC when intending to apply cold
temperature compensation and of the amount of
compensation required. Pilots will not apply altitude
compensation, unless authorized, when assigned an
altitude if provided an initial heading to fly or radar
vectors in lieu of published missed approach
procedures. Consideration should be given to vectoring
aircraft at or above the requested compensating altitude
if possible.
Add REFERENCE −
AIM, Paragraph 5-5-5, Missed Approach
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−29OLD NEW
4-8-10. APPROACH INFORMATION 4-8-10. APPROACH INFORMATION
Title through e No Change
Add f. Applicable notations on instrument
approach charts which levy on the pilot the
responsibility to comply with or act on an
instruction; for example, “Straight-in minima
not authorized at night,” “Procedure not
authorized when glideslope/glidepath not used,”
“Use of procedure limited to air craft authorized
to use airport,” “Procedure not authorized at
night,” or a Snowflake icon indicating
mandatory cold temperature compensation.
Add REFERENCE −
AIM, Paragraph 5-1-17, Cold Temperature Operations
AIM, Paragraph 5-5-4, Instrument Approach
AIM, Paragraph 5-5-5, Missed Approach
1. PARAGRAPH NUMBER AND TITLE: 4-8-1. APPROACH CLEARANCE
2. BACKGROUND: In the January 2015 change to this paragraph, sub-paragraph f was revised. Content
involving Radius to Fix (RF) legs was revised by removing mileage distances that were stated for the segmentprior to commencing an RF leg. However, the associated FIG 4-8-5 was not changed at the time the content was
revised.
3. CHANGE:
OLD
NEW
4-8-1. APPROACH CLEARANCE 4-8-1. APPROACH CLEARANCE
Title through i4 NOTE No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−30OLD
FIG 4−8−5
Radius to Fix (RF) and Track to Fix (TF)
NEW
FIG 4−8−5
Radius to Fix (RF) and Track to Fix (TF)
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−311. PARAGRAPH NUMBER AND TITLE: 5-1-3. RADAR USE
2. BACKGROUND: FAA Order JO 7110.310, Automatic Dependent Surveillance-Broadcast (ADS-B) Air
Traffic Control (ATC) Services at Air Route Traffic Control Centers (ARTCCs) Using En Route Automation
Modernization (ERAM) and FAA Order JO 7110.313 Wide Area Multilateration (WAM) Air Traffic Control
(ATC) Services at Air Route Traffic Control Centers (ARTCCs) approved ADS-B and WAM surveillanceinformation for use in the En Route domain as a surveillance source. Safety analyses have been completed that
support the use of ADS-B and WAM targets in all areas with or without existing radar coverage.
3. CHANGE:
OLD
NEW
5-1-3. RADAR USE 5-1-3. ATC SURVEILLANCE SOURCE USE
Use radar information derived from primary and
secondary radar systems .Use approved ATC surveillance sources.
REFERENCE through b No Change
Add c. All procedures and requirements relating to
ATC services using secondary radar targets
apply to ATC services provided to targets
derived from ADS-B and WAM.
Add NOTE−
Targets derived from ADS-B and/or WAM cannot be
used to provide 3NM separation in the EAS. 3NM
targets are not derived from ADS-B and/or W AM within
the EAS.
Add REFERENCE −
JO 7110.65, Para4-1-2, Exceptions.
JO 7110.65, Para 4-4-2, Route Structure Transitions
JO 7110.65, Para 5-5-1, Application
JO 7110.65, Para 6-5-4, Minima Along Other Than Established
Airways or Routes
JO 7110.65, Chapter 6, Nonradar
JO 7110.65, Para 5-5-4, Minima
JO 7210.3 3-6-2 ATC Surveillance Source Use
1. PARAGRAPH NUMBER AND TITLE: 5-4-3. METHODS
2. BACKGROUND: Since 2009 the New York Air Route Traffic Control Center has been working under a
waiver that allows the use of the Computer Identification Number (CID) in lieu of using the aircraft call sign or
discreet beacon code for aircraft identification under paragraph 5-4-3, METHODS, sub-paragraph b.2. This DCP
incorporates the provisions of the waiver so the use of the CID is available to all Enroute facilities.
3. CHANGE:
OLD NEW
5-4-3. METHODS 5-4-3. METHODS
Title through b2(a) No Change
(b) The discrete beacon code of the aircraft during
inter-facility point-outs only, if both the receiving
and the transferring controllers agree.(b) The discrete beacon code of the aircraft during
inter-facility point-outs only, if both the receiving
and the transferring controllers agree , or
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−32Add (c) EN ROUTE. The Computer Identification
Number (CID) during intra-facility point-outs.
Add EXAMPLE −
“Point Out, Southwest of Richmond VOR, C-I-D
123…”
1. PARAGRAPH NUMBER AND TITLE: 5−4−6. RECEIVING CONTROLLER HANDOFF
2. BACKGROUND: Several years ago the F AA began replacing the En Route legacy computer system known
as Host, with a new, NextGen enabling system known as En Route Automation Modernization (ERAM). Theinstallation of ERAM was accomplished using a waterfall implementation process over the span of many years.
During this transition period, the guidance for air traffic control services operating under ERAM was found in
FAA Order JO 71 10.311. Now that the transition nears completion, FAA Order 71 10.311C is being incorporated
into FAA Order JO 7110.65. During this process, certain outdated terms that are no longer used in the field were
identified. The decision was made to use this opportunity to update the handbook by eliminating or amending the
outdated terminology.
3. CHANGE:
OLD
NEW
5−4−6. RECEIVING CONTROLLER
HANDOFF5−4−6. RECEIVING CONTROLLER
HANDOFF
Title through e3 No Change
f. Initiate verbal coordination prior to accepting
control of a track when “CST,” “NAT,” “NT,”
“NONE,” “NB,” “NX,” “OLD,” “OL,” “AMB,”
“AM,” or “TU” is displayed in the data block.f. Take the identified ac tion prior to accepting
control of a track when the following indicators are
displayed in the data block:
1. When an automated interfacility handoff
action is initiated and “AMB” or “AM” is displayed
in the full data block, advise the other facility that
a disparity exists between the position declared by
their computer and that declared by your
CARTS/PIDP/STARS system.1. “AMB” and “AM”: advise the other facility
that a disparity exists between the position declared
by their computer and that declared by your
CARTS/PIDP/STARS system.
2. When an automated interfacility handoff
action is initiated and “NAT,” “NT,” or “TU” is
displayed in the full data block, advise the other
facility if a disparity exists between the position
declared by their computer and the actual target
position.2. “NAT”, “NT,” or “TU”: advise the other
facility if a disparity exists between the position
declared by their computer and the actual target
position.
Add 3. “DATA”, “CST”, “NONE”, “NX”, “OLD”,
or “OL”: initiate verbal coordination.
Add g. ERAM: Notify the FLM when a MISM is
displayed in the data block.
g. Advise the transferring controller, prior to
accepting the transfer of radar identification, that
you will delay the climb or the descent of an aircraftthrough the vertical limits of the transferring
controller’s area of jurisdiction, unless otherwise
specified in a LOA or a facility directive.h.
Advise the transferring controller, prior to
accepting the transfer of radar identification, that
you will delay the climb or the descent of an aircraftthrough the vertical limits of the transferring
controller’s area of jurisdiction, unless otherwise
specified in a LOA or a facility directive.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−33NOTE−
Those en route facilities using HOST software that
provides capability for passing interim altitude shall
include the specific operations and pr ocedures for use of
this procedure in a LOA between the appropriate
facilities.Delete
h. If you decide, after accepting the transfer of
radar identification, to delay the aircraft’s climb or
descent through the vertical limits of thetransferring controller’s area of jurisdiction, advise
the transferring controller of that decision as soon
as possible.i.
If you decide, after accepting the transfer of
radar identification, to delay the aircraft’s climb or
descent through the vertical limits of thetransferring controller’s area of jurisdiction, advise
the transferring controller of that decision as soon
as possible.
NOTE−
Those en route facilities using HOST software that
provides capability for passing interim altitude shall
include the specific operations and pr ocedures for use of
this procedure in a LOA between the appropriate
facilities.Delete
1. PARAGRAPH NUMBER AND TITLE: 5-6-2. METHODS
2. BACKGROUND: Instrument flight procedures with published crossing restrictions have been in use for
many years. Continued evolution of flight procedures has resulted in the need to clarify and supplement actions
required when an aircraft is issued a clearance off a procedure that contains published altitude restrictions.Current guidance for when an aircraft is vectored off a procedure has not changed since 1980. Existing guidance
does not capture the nuances surrounding Climb Via and Descend V ia clearances when subsequent radar vectors
are issued or aircraft are cleared to deviate from Climb Via/Descend Via procedures. Without an assigned altitude
or a published fix to rejoin, Flight Management Systems may no longer calculate crossing altitudes and VNA V
may revert to a SID/STAR’s top or bottom altitude. In a separate issue, Flight Standards AFS-420 identified anissue with regards to Obstacle Departure Procedures (ODP). In order to be consistent with language currentlyfound in the AIM, they recommend adding guidance to this order for when an aircraft is vectored off an Obstacle
Departure Procedure (ODP).
3. CHANGE:
OLD
NEW
5-6-2. METHODS 5-6-2. METHODS
Title through a3 No Change
b. When initiating a vector, advise the pilot of the
purpose.b. When initiating a vector, advise the pilot of the
purpose, and if appropriate, what to expect when
radar navigational guidance is terminated.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−34PHRASEOLOGY −
VECTOR TO (fix or airway).
VECTOR TOINTERCEPT (name of NAVAID)
(specified) RADIAL.
VECTOR FOR SP ACING.
VECTOR TO FINAL APPROACH COURSE,
or if the pilot does not have knowledge of the type of
approach,
VECTOR TO (approach name) FINAL APPROACH
COURSE.PHRASEOLOGY −
VECTOR TO (fix or airway).
VECTOR TO INTERCEPT (name of NAVAID)
(specified) RADIAL.
VECTOR FOR SP ACING.
(if appropriate) EXPECT DIRECT (NAVAID,
waypoint, fix)
VECTOR TO FINAL APPROACH COURSE, or if the pilot does not have knowledge of the type of
approach,
VECTOR TO (approach name) FINAL APPROACH
COURSE.
NOTE No Change
c. Issue with the vector an altitude to maintain and
all appropriate altitude restrictions when:c. When vectoring or approving course
deviations, assign an altitude to maintain when:
1. The vector will take the aircraft off an
assigned procedure which contains altitude
instructions, i.e., instrument approach, nonradar
SID, FMSP, etc.1. The vector or approved deviation is off an
assigned procedure which contains altitude
instructions, i.e., instrument approach, etc.
c2 No Change
Add 3. The vector or approved deviation is off an
assigned procedure that contains published
altitude restrictions, i.e., SID, STAR, and a
clearance to Climb Via/Descend Via has been
issued.
d. If appropriate, advise the pilot what to expect
when the vector is completed.d. When vectoring or approving an aircraft to
deviate off of a procedure that includes
published altitude restrictions, advise the pilot if
you intend on clearing the aircraft to r esume the
procedure.
PHRASEOLOGY −
EXPECT TO RESUME (Route, SID, STAR, FMSP ,
etc.).PHRASEOLOGY −
FLY HEADING (degrees), MAINTAIN (altitude),
EXPECT TO RESUME (SID, STAR, etc.). DEVIATION
(restrictions if necessary) APPROVED, MAINTAIN
(altitude) EXPECT TO RESUME (SID, STAR, etc.) AT
(NAVAID, fix, waypoint)
NOTE−
You must ensure that the pilot is made aware if he/she is
expected to resume a previously issued route procedure.NOTE−
After a Climb Via or Descend Via clearance has been
issued, a vector/deviation off of a SID/STAR cancels the
altitude restrictions on the procedure. The aircraft’s
Flight Management System (FMS) may be unable to
process crossing altitude restrictions once the aircraft
leaves the SID/STAR lateral path. Without an assigned
altitude, the aircraft’s FMS may revert to leveling off at
the altitude set by the pilot, which may be the
SID/STAR’s published top or bottom altitude.
e through e3 No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−35PHRASEOLOGY −
(Position with respect to course/fix along route),
RESUME OWN NAVIGATION,
or
FLY HEADING (degrees). WHEN ABLE, PROCEED
DIRECT (name of fix),
or
RESUME ( name/number FMSP/ SID/transition /STAR/
procedure).PHRASEOLOGY −
(Position with respect to course/fix along route),
RESUME OWN NAVIGATION, FLY HEADING
(degrees). WHEN ABLE, PROCEED DIRECT (nameof fix), RESUME (SID/STAR/ transition
/procedure).
REFERENCE −
F AAO JO 7110.65, Chapter 4, Section 1, NAVAID Use Limitations.REFERENCE −
F AAO JO 7110.65, Chapter 4, Section 1, NAVAID Use Limitations
FAAO JO 7110.65,Paragraph 4-5-7, Altitude Information
f. Aircraft instructed to resume a procedure which
contains restrictions (SID/STAR/FMSP , etc.) must
be issued/reissued all applicable restrictions ormust be advised to comply with those restrictions.f. Aircraft instructed to resume a procedure which
contains restrictions (SID/STAR, etc.) must be
issued/reissued all applicable restrictions or mustbe advised to comply with those restrictions.
PHRASEOLOGY −
RESUME ( name/number FMSP /SID/transition/STAR),
COMPLY WITH RESTRICTIONS.PHRASEOLOGY −
RESUME ( name/SID/transition/STAR), COMPLY WITH
RESTRICTIONS. PROCEED DIRECT (NAVAID, fix,
waypoint) CROSS (NAVAID, fix, waypoint) AT/AT OR
ABOVE/AT OR BELOW (altitude) CLIMB
VIA/DESCEND VIA (SID/STAR)
EXAMPLE −
“Resume the Mudde One Arrival, comply with
restrictions.”
“Cleared direct Luxor, resume the Ksino One arrival,comply with restrictions.”EXAMPLE /C0042
“Resume the Mudde One Arrival, comply with
restrictions.”“Cleared direct Luxor, resume the Ksino One arrival,
comply with restrictions.”
“Cleared direct HITME, cross HITME at or above
one one thousand, climb via the Boach Five
departure. ”
Add g. Aircraft may not be vectored off an Obstacle
Departure Procedure (ODP), or issued an
altitude lower than published altitude on an
ODP, until at or above the MV A/MIA, at which
time the ODP is cancelled.
AddNOTE−
Once an aircraft has been vectored off an Obstacle
Departure Procedure, the procedure is cancelled and
ATC cannot clear the aircraft to resume the ODP .
Add REFERENCE −
P/CG, Obstacle Departure Procedure
g Re−Letter to h
i Re−Letter to j
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−361. PARAGRAPH NUMBER AND TITLE: 5-9-10. SIMULTANEOUS INDEPENDENT APPROACHES
TO WIDELY-SPACED PARALLEL RUNWAYS WITHOUT FINAL MONITORS
2. BACKGROUND: The Flight Technologies and Procedures Division, AFS-400, removed the requirement
to provide 1,000 feet vertical or 3 miles radar separation during turn on to widely spaced parallel finals andsubstituted procedural design to allow simultaneous independent parallel operations between RNA V (RNP)approaches with RF legs and a RNA V (RNP) approaches with RF legs and certain other straight −in approaches.
3. CHANGE:
OLD
NEW
5-9-10. SIMULTANEOUS INDEPENDENT
APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINALMONITORS5-9-10. SIMULTANEOUS INDEPENDENT
APPROACHES TO WIDELY-SPACED
PARALLEL RUNWAYS WITHOUT FINALMONITORS
Title through a No Change
1. Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft during turn-on to parallel final approach. 1. Provide a minimum of 1,000 feet vertical or
a minimum of 3 miles radar separation between
aircraft :
Add (a) during turn-on to parallel final
approach, or
Add (b) conducting an RNA V (RNP) approach
that contains a Radius-to-Fix (RF) leg and an
aircraft conducting a straight-in ILS/RNA V
with vertical guidance/GLS or another RNA V
(RNP) approach with an RF leg until both
aircraft are established on their respective
approach procedur es. Ensure d ual RNA V (RNP)
approaches that contain RF legs are limited to
aircraft approaching from opposite downwinds
or base legs and all approach pairings must be
conducted so that the approach courses do not
overlap.
Add REFERENCE −
FAAO JO 7210.3, Paragraph 10-4-7, Simultaneous
Widely-Spaced Parallel Operations
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−371. PARAGRAPH NUMBER AND TITLE: 7-2-1. VISUAL SEPARATION
2. BACKGROUND: Improper application of tower-applied and pilot-applied visual separation has been
identified by the Air Traf fic Or ganization (AT O) Safety Roundtable as an ATO Top 5 Issue for 2015. The Top 5 is
a quantifiable list of hazards that contribute to the highest risk in the National Airspace System.
3. CHANGE:
OLD NEW
7-2-1. VISUAL SEPARATION 7-2-1. VISUAL SEPARATION
Aircraft may be separated by visual means, as
provided in this paragraph , when other approved
separation is assured before and after the
application of visual separation. To ensure that
other separation will exist, consider aircraftperformance, wake turbulence, closure rate, routes
of flight, and
known weather conditions. Reported
weather conditions must allow the aircraft to remain
within sight until other separation exists. Do not
apply visual separation between successive depar-
tures when departure routes and/or aircraft
performance preclude maintainingVisual separation may be applied when other
approved separation is assured before and after the
application of visual separation. To ensure that
other separation will exist, consider aircraft
performance, wake turbulence, closure rate, routesof flight, known weather conditions, and aircraft
position . Weather conditions must allow the
aircraft to remain within sight until other separation
exists.
REFERENCE No Change
a1 No Change
(a) Maintain communication with at least one
of the aircraft involved or ensure there is an ability
to communicate immediately as prescribed inp
aragraph 3-9-3, Departure Control Instructions,
subparagraph a2.(a) Maintain communication with at least one
of the aircraft involved or ensure there is an ability
to communicate immediately with applicable
military aircraft as prescribed in Paragraph 3-9-3,
Departure Control Instructions, subparagraph a2.
(b) The tower visually observes the aircraft,
issues timely traffic advisories, and maintains
visual separation between the aircraft. The use of
tower-applied visual separation is not authorized
when wake turbulence separation is required.(b) The tower visually observes the aircraft,
issues timely traf fic advisories, and provides visual
separation between the aircraft.
(c) Issue subsequent control instructions as
necessary to ensure continued separation between
the applicable aircraft.(c) Issue control instructions as necessary to
ensure continued separation between the applicable
aircraft.
Add (d) Do not apply visual separation between
successive departures when departure routes
and/or aircraft performance preclude
maintaining separation.
Add (e) The use of tower-applied visual
separation is not authorized when wake
turbulence separation is required.
NOTE−
Adjacent airports with operating ATCTs are not
authorized to apply visual separation between their
traffic and the other ATCT’ s traffic.(f) Adjacent airports with operating ATCTs are
not authorized to apply visual separation between
their traffic and the other ATCT’s traffic.
a2(a) and a2(b) No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−38(1) Tell the pilot about the other aircraft.
Include position, direction, and, unless it is obvious,
the other aircraft’s intention.(1) Tell the pilot about the other aircraft.
Include position, direction, type and, unless it is
obvious, the other aircraft’s intention.
a2(b)(2) and a2(b)(3) No Change
PHRASEOLOGY −
TRAFFIC, (clock position and distance), (direction)
BOUND, (type of air craft), (intentions and other r elevant
information).
DO YOU HAVE IT IN SIGHT?
If the answer is in the affirmative,
MAINTAIN VISUAL SEP ARATION.PHRASEOLOGY −
(ACID), TRAFFIC, (clock position and distance),
(direction) BOUND, (type of aircraft), (intentions and
other relevant information).
If required,
(ACID), REPORT TRAFFIC IN SIGHT or DO YOU
HAVE IT IN SIGHT?
If the pilot reports traffic in sight, or the answer is in the
affirmative,
(ACID), MAINTAIN VISUAL SEP ARATION
Add NOTE−
Towers must use the procedures contained in
Paragraph 3-1-6, Traf fic Information, Subparagraph b
or c, as appropriate.
(c) If the pilot advises he/she has the traffic in
sight and will maintain visual separation from it (the
pilot must use that entire phrase ), the controller
need only “approve” the operation instead of
restating the instructions.(c) If the pilot reports the traffic in sight and
will maintain visual separation from it (the pilot
must state both ), the controller may “approve” the
operation instead of restating the instructions.
PHRASEOLOGY −
APPROVED.PHRASEOLOGY −
(ACID), APPROVED.
NOTE−
Pilot-applied visual separation between aircraft is
achieved when the controller has instructed the pilot to
maintain visual separation and the pilot acknowledgesor when the controller has appr oved pilot-initiated visual
separation.NOTE−
Pilot-applied visual separation between aircraft is
achieved when the controller has instructed the pilot to
maintain visual separation and the pilot acknowledgeswith their call sign
or when the contr oller has approved
pilot-initiated visual separation.
REFERENCE −
F AAO JO 7110.65, Para 5-4-5, Transferring Controller HandoffNo Change
(d) If the aircraft are on converging courses,
inform the other aircraft of the traffic and that visual
separation is being applied.(d) If aircraft are on converging courses,
inform the other aircraft of the traffic and that visual
separation is being applied.
PHRASEOLOGY −
TRAFFIC, (clock position and distance), (direction)
BOUND, (type of aircraft), HAS YOU IN SIGHT AND
WILL MAINTAIN VISUAL SEP ARATION.PHRASEOLOGY −
(ACID), TRAFFIC, (clock position and distance),
(direction) BOUND, (type of aircraft), HAS YOU IN
SIGHT AND WILL MAINTAIN VISUAL SEP ARATION.
(e) Advise the pilots if the radar targets appear
likely to merge.(e) Advise the pilots if the targets appear likely
to merge.
NOTE No Change
EXAMPLE −
“Radar targets appear likely to merge.”EXAMPLE −
“Targets appear likely to merge.”
b. TERMINAL . Control of aircraft maintaining
visual separation may be transferred to an adjacent
position/sector/facility. Coordination proceduresmust be specified in an LOA or facility directive.(f)
Control of aircraft maintaining visual
separation may be transferred to an adjacent
position/sector/facility. Coordination procedures
must be specified in an LOA or facility directive.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−39REFERENCE No Change
c. EN ROUTE. V isual separation may be used up
to but not including FL 180 when the following
conditions are met:b. EN ROUTE. Visual separation may be used up
to but not including FL 180 when the following
conditions are met:
1. Direct communication is maintained with one
of the aircraft involved and there is an ability to
communicate with the other.No Change
2. A pilot sees another aircraft and is instructed
to maintain visual separation from it as follows:No Change
(a) Tell the pilot about the other aircraft
including position, direction and unless it is
obvious, the other aircraft’s intentions.(a) Tell the pilot about the other aircraft
including position, direction , and type. If it is not
obvious, include the other aircraft’s intentions.
Add REFERENCE −
FAAO JO 7110.65, Para 2 −1−21, Traf fic Advisories.
(b) Obtain acknowledgment from the pilot that
the other aircraft is in sight.No Change
(c) Instruct the pilot to maintain visual
separation from that aircraft.No Change
Add PHRASEOLOGY −
(ACID), TRAFFIC, (clock position and distance),
(direction) BOUND, (type of aircraft), (intentions and
other relevant information). If required, (ACID),
REPORT TRAFFIC IN SIGHT or DO YOU HAVE IT
IN SIGHT? If the pilot reports traffic in sight, or the
answer is in the affirmative, (ACID), MAINTAIN
VISUAL SEPARATION
Add (d) If the pilot r eports the traffic in sight and
will maintain visual separation (the pilot must
state both), the controller may “approve” the
operation instead of restating the instructions.
Add PHRASEOLOGY −
(ACID), APPROVED.
Add NOTE−
Pilot-applied visual separation between aircraft is
achieved when the controller has instructed the pilot to
maintain visual separation and the pilot acknowledges
with their call sign or when the controller has approved
pilot-initiated visual separation.
(d) Advise the pilot if the radar targets appear
likely to converge.(e) Advise the pilot if the targets appear likely
to converge.
(e) If the aircraft are on converging courses,
inform the other aircraft of the traffic and that visual
separation is being applied.(f) If aircraft are on conver ging courses, inform
the other aircraft of the traffic and that visual
separation is being applied.
Add PHRASEOLOGY −
(ACID) TRAFFIC, (clock position and distance),
(direction) −BOUND, (type of aircraft), ON
CONVERGING COURSE, HAS YOU IN SIGHT AND
WILL MAINTAIN VISUAL SEPARATION.
Add REFERENCE −
FAAO JO 7110.65, Para 7 −4−1, Visual Approach.
FAAO JO 71 10.65, Para 7 −4−2, Vectors for Visual Approach.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−40(f) Advise the pilots if either aircraft is a heavy. (g) Advise the pilots if either aircraft is a heavy.
(g) Traffic advisories and wake turbulence
cautionary advisories must be issued in accordance
with para 2 −1−20, Wake Turbulence Cautionary
Advisories, and para 2 −1−21, Traffic Advisories .(h) Issue wake turbulence cautionary advisories
in accordance with para 2 −1−20.
(h) If the pilot advises he/she has the traffic in
sight and will maintain visual separation from it (the
pilot must use that entire phrase), the controller
need only “approve” the operation instead of
restating the instructions.Delete
PHRASEOLOGY −
TRAFFIC, (clock position and distance),
(direction) −BOUND, (type of air craft), (intentions and
other relevant information).
If applicable,
ON CONVERGING COURSE.
DO YOU HAVE IT IN SIGHT?
If the answer is in the affirmative,
MAINTAIN VISUAL SEP ARATION.
If the pilot advises he/she has the traffic in sight and
will maintain visual separation from it (pilot must use
that entire phrase):
(Call Sign) APPROVED.
If aircraft are on converging courses, advise the other
aircraft:
TRAFFIC, (clock position and distance),
(direction) −BOUND, (type of air craft), HAS YOU IN
SIGHT AND WILL MAINTAIN VISUAL SEP ARATION.Delete
REFERENCE −
F AAO JO 7110.65, Para 7–4–1, Visual Approach.
F AAO JO 7110.65, Para 7–4–2, Vectors for Visual Approach.Delete
d. Nonapproach control towers may be authorized
to provide visual separation between aircraft within
surface areas or designated areas provided otherseparation is assured before and after the
application of visual separation. This may be
applied by t he nonapproach control tower
providing the separation or by a pilot visually
observing another aircraft and being instructed to
maintain visual separation with that aircraft.c. Nonapproach control towers may be authorized
to provide visual separation between aircraft within
surface areas or designated areas when approvedseparation is provided before and after the
application of visual separation. T
he nonapproach
control tower must apply the procedures
contained in subparagraph a1 or a2, when
applying visual separation.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−41PHRASEOLOGY −
VISUAL SEP ARATION APPROVED BETWEEN
(identification) AND (identification),
and for departing aircraft,
(departing/succeeding aircraft) RELEASED YOUR
DISCRETION .PHRASEOLOGY −
VISUAL SEP ARATION APPROVED BETWEEN
(ACID) AND (ACID) ,
and for departing aircraft,
(departing/succeeding aircraft) (ACID), RELEASED.
Add d. If the nonapproach control tower controller
states to the radar controller that they will
provide visual separation between arrivals,
departures/arrivals and/or successive
departures, and states the call signs of all air craft
involved, the radar controller can approve the
application of visual separation as requested.
Add PHRASEOLOGY −
VISUAL SEPARATION APPROVED and for
departing/succeeding aircraft, (ACIDs) RELEASED
NOTE−
Separation of IFR air craft before and after application of
visual separation is an IFR control function ( Approach/
Departure/En Route) . A nonapproach control tower by
accepting authorization for visual separation becomes
responsible for ensuring that separation. Separation
requirements also apply to VFR air craft when IFR, Class
B, Class C or TRSA separation is prescribed .NOTE−
A nonapproach control tower by accepting
authorization for visual separation becomes
responsible for ensuring that separation. Separation of
IFR aircraft before and after application of visualseparation is an IFR control function that must be
applied by the Approach/Departure/En Route facility .
Separation requir ements also apply to VFR air craft when
IFR, Class B, Class C or TRSA separation services are
required.
REFERENCE No Change
1. PARAGRAPH NUMBER AND TITLE: 7-4-4. APPROACHES TO MULTIPLE RUNWAYS
2. BACKGROUND: Current procedures in FAA Order JO 7110.65, Paragraphs 7-4-4 c2 and c3 restrict
controllers to use of radar vectors to achieve the required maximum 30-degree intercept to the final approach
course. Advanced NextGen procedures provide a greater degree of course accuracy. However, current guidance
does not permit their use with conventional and visual approach procedures while conducting approaches tomultiple runways.
3. CHANGE:
OLD
NEW
7-4-4. APPROACHES TO MULTIPLE
RUNWAYS7-4-4. APPROACHES TO MULTIPLE
RUNWAYS
Title through c2 No Change
(a) Approved separation is provided until the
aircraft are established on a heading which will
intercept the extended centerline of the runway at an
angle not greater than 30 degrees, and each aircraft
has been issued and one pilot has acknowledged
receipt of the visual approach clearance, and the
other pilot has acknowledged receipt of the visual
or instrument approach clearance .(a) Approved separation is provided until the
aircraft are :
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−42Add (1) Established on a heading or established
on a direct course to a fix or cleared on an RNA V/
instrument approach procedure which will
intercept the extended centerline of the runway
at an angle not greater than 30 degrees, and,
Add (2) Issued an approach clearance and one
pilot has acknowledged receipt of a visual
approach clearance, and,
Add (3) The other pilot has acknowledged
receipt of a visual or instrument approach
clearance.
NOTE 1 and 2 No Change
Add NOTE−
3. Procedures using Radius-to-Fix legs that intercept
final may be used in lieu of 30-degree intercept
provisions contained in this paragraph.
REFERENCE −
F AA Publication, Pilot’ s Handbook of Aeronautical Knowledge,
Chapter 15 “Effect of Wind.”No Change
c2(b) through c3(c) No Change
(d) Each aircraft must be assigned headings
which will allow the aircraft to intercept the
extended centerline of the runway at an angle notgreater than 30 degrees.(d) Each aircraft must either
be assigned a
heading or established on a dir ect course to a fix
or cleared on an RNA V/instrument approach
procedure which will allow the aircraft to intercept
the extended centerline of the runway at an angle
not greater than 30 degrees.
NOTE 1 and 2 No Change
Add NOTE−
3. Procedures using Radius-to-Fix legs that intercept
final may be used in lieu of 30-degree intercept
provisions contained in this paragraph.
REFERENCE −
F AA Publication, Pilot’ s Handbook of Aeronautical Knowledge,
Chapter 15 “Effect of Wind.”No Change
c4 No Change
1. PARAGRAPH NUMBER AND TITLE:
8-7-3. LONGITUDINAL SEPARATION8-8-3. LONGITUDINAL SEPARATION
8-9-3. LONGITUDINAL SEPARATION
8-10-3. LONGITUDINAL SEPARATION
2. BACKGROUND: ADS-B In Trail Procedure (ITP) is an additional capability fully compatible with the
existing Advanced T echnologies and Ocean Procedures (ATOP) oceanic automation system. The ADS-B ITP is a
pilot-requested procedure that utilizes existing ADS-B aircraft equipage and air traffic control capabilities toallow more flights to achieve their preferred vertical profiles, and thereby increases both capacity and ef ficiency
in the oceanic domain. The ADS-B ITP was designed to improve service to appropriately equipped aircraft by
allowing pilots to request an altitude change when the existing separation minima do not allow aircraft to climb or
descend through the altitude of a blocking aircraft.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−433. CHANGE:
OLD NEW
8-7-3. LONGITUDINAL SEPARATION 8-7-3. LONGITUDINAL SEPARATION
Title through c2 No Change
Add d. Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
Add 1. The ITP climb or descent has been
requested by the pilot;
Add 2. The aircraft identification of each
reference aircraft in the ITP request exactly
matches the Item 7 - air craft identification of the
corresponding aircraft’s filed flight plan;
Add 3. The r eported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or
more;
Add 4. Both the ITP aircraft and reference
aircraft are either on:
Add (a) same identical tracks and any turn at a
waypoint shall be limited to less than 45 degr ees;
or
Add (b) same tracks with no turns permitted that
degrade required separation during the ITP.
Add NOTE−
Same identical tracks are where the angular difference
is zero degrees.
Add 5. No speed or r oute change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
Add 6. The altitude difference between the ITP
aircraft and any r eference aircraft shall be 2000
ft or less;
Add 7. No instruction to amend speed, altitude or
route shall be issued to any reference aircraft
until the ITP climb or descent is completed;
Add 8. The maximum closing speed between the
ITP aircraft and each r eference aircraft shall be
Mach 0.06; and
Add 9. The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
Add NOTE−
ATOP is designed to check for the above criteria prior
to allowing the minima to be provided.
d Re−Letter e
OLD NEW
8-8-3. LONGITUDINAL SEPARATION 8-8-3. LONGITUDINAL SEPARATION
Title through d3 No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−44Add e. Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
Add 1. The ITP climb or descent has been
requested by the pilot;
Add 2. The aircraft identification of each
reference aircraft in the ITP request exactly
matches the Item 7 - air craft identification of the
corresponding aircraft’s filed flight plan;
Add 3. The r eported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or
more;
Add 4. Both the ITP aircraft and reference
aircraft are either on:
Add (a) same identical tracks and any turn at a
waypoint shall be limited to less than 45 degr ees;
or
Add (b) same tracks with no turns permitted that
degrade required separation during the ITP.
Add NOTE−
Same identical tracks are where the angular difference
is zero degrees.
Add 5. No speed or r oute change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
Add 6. The altitude difference between the ITP
aircraft and any r eference aircraft shall be 2000
ft or less;
Add 7. No instruction to amend speed, altitude or
route shall be issued to any reference aircraft
until the ITP climb or descent is completed;
Add 8. The maximum closing speed between the
ITP aircraft and each r eference aircraft shall be
Mach 0.06; and
Add 9. The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
Add NOTE−
ATOP is designed to check for the above criteria prior
to allowing the minima to be provided.
e Renumber f
OLD NEW
8-9-3. LONGITUDINAL SEPARATION 8-9-3. LONGITUDINAL SEPARATION
Title through a4 No Change
Add b. Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−45Add 1. The ITP climb or descent has been
requested by the pilot;
Add 2. The aircraft identification of each
reference aircraft in the ITP request exactly
matches the Item 7 aircraft identification of the
corresponding aircraft's filed flight plan;
Add 3. The r eported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or
more;
Add 4. Both the ITP aircraft and reference
aircraft are either on:
Add (a) Same identical tracks and any turn at a
waypoint shall be limited to less than 45 degr ees;
or
Add (b) same tracks with no turns permitted
that degrade required separation during the
ITP.
Add NOTE−
Same identical tracks are where the angular difference
is zero degrees.
Add 5. No speed or r oute change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
Add 6. The altitude difference between the ITP
aircraft and any r eference aircraft shall be 2000
ft or less;
Add 7. No instruction to amend speed, altitude or
route shall be issued to any reference aircraft
until the ITP climb or descent is completed;
Add 8. The maximum closing speed between the
ITP aircraft and each r eference aircraft shall be
Mach 0.06; and
Add 9. The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
Add NOTE−
ATOP is designed to check for the above criteria prior
to allowing the minima to be provided.
b Re−Letter c
OLD NEW
8-10-3. LONGITUDINAL SEPARATION 8-10-3. LONGITUDINAL SEPARATION
Title through a3 No Change
Add b. Clear an aircraft for an ADS-B In Trail
Procedure (ITP) climb or descent provided the
following conditions are satisfied:
Add 1. The ITP climb or descent has been
requested by the pilot;
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−46Add 2. The aircraft identification of each
reference aircraft in the ITP request exactly
matches the Item 7 - air craft identification of the
corresponding aircraft’s filed flight plan;
Add 3. The r eported ITP distance between the ITP
aircraft and any reference aircraft is 15 NM or
more;
Add 4. Both the ITP aircraft and reference
aircraft are either on:
Add (a) same identical tracks and any turn at a
waypoint shall be limited to less than 45 degr ees;
or
Add (b) same tracks with no turns permitted that
degrade required separation during the ITP.
Add NOTE−
Same identical tracks are where the angular difference
is zero degrees.
Add 5. No speed or r oute change clearance shall be
issued to the ITP aircraft until the ITP climb or
descent is completed;
Add 6. The altitude difference between the ITP
aircraft and any r eference aircraft shall be 2000
ft or less;
Add 7. No instruction to amend speed, altitude or
route shall be issued to any reference aircraft
until the ITP climb or descent is completed;
Add 8. The maximum closing speed between the
ITP aircraft and each r eference aircraft shall be
Mach 0.06; and
Add 9. The ITP aircraft shall not be a reference
aircraft in another ITP clearance.
Add NOTE−
ATOP is designed to check for the above criteria prior
to allowing the minima to be provided.
b Re−Letter c
1. PARAGRAPH NUMBER AND TITLE: 9-1-2. SPECIAL HANDLING
2. BACKGROUND: A GENOT was issued on May 11, 2015, regarding the call sign addition FLIGHT V AL.
Activities associated with FAA authorized non-FAA Service Providers conducting Flight Validation (FV)activities are similar to Flight Check activities. The Flight Procedure Implementation and Oversight Branch(AFS-460) felt that additional information should be added to FAA Order JO 7110.65, para 9-1-2 to increase Air
Traffic awareness and understanding of the level of activity required.
3. CHANGE:
OLD
NEW
9-1-2. SPECIAL HANDLING 9-1-2. SPECIAL HANDLING
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−47Title through d No Change
NOTE−
F AA flight inspection aircraft will file flight plans using
the call sign “FLIGHT CHECK” during flight
inspections or when inbound to conduct flightinspections. Flight plan remarks may indicate typeNAVAID inspection to be accomplished; e.g. “FC OKC
P. ”NOTE−
FAA flight inspection air craft will file flight plans using
the call sign “FLIGHT CHECK” during flight
inspections or when inbound to conduct flightinspections. Flight plan remarks may indicate typeNAVAID inspection to be accomplished; e.g. “FC OKC
P. ”
Add 2. Authorized non-FAA Service Providers conducting
Flight Validation activities use the call sign “FLIGHT
VAL.” Although these activities are similar to Flight
Inspection activities, no additional priority is granted
with this call sign.
1. PARAGRAPH NUMBER AND TITLE: 10-2-13. MANPADS ALERT
2. BACKGROUND: Changes to reporting responsibilities and obsolete procedures have necessitated updates
and clarifications to MANPADS paragraphs in FAA Order JO 7610.4, Special Operations; FAA Order JO
7210.3, Facility Operation and Administration; and FAA Order JO 7110.65, Air Traffic Control. The updates
include requiring ATC facilities to report any MANPADS threat received to the the Domestic Events Network(DEN) Air Traffic Security Coordinator (ATSC).
3. CHANGE:
OLD
NEW
10-2-13. MANPADS ALERT 10-2-13. MANPADS ALERT
Title through c No Change
d. Report MANPADS threat/attack/post–event
activity until notified otherwise by FAA national
headquarters .d. Report MANPADS threat/attack/post–event
activity via the ATIS and/or controller–to–pilot
transmissions until notified otherwise by the
Domestic Events Network (DEN) Air Traffic
Security Coordinator (ATSC).
REFERENCE −
F AAO JO 7110.65, Para 2–9–3, Content.
F AAO JO 7210.3, Para 2–1–9, Handling MANP ADS Incidents.REFERENCE −
F AAO JO 7110.65, Para 2–9–3, Content.
F AAO JO 7210.3, Para 2–1–9, Handling MANP ADS Incidents.FAAO JO 7610.4, Para 16-1-3, Responsibilities.
1. PARAGRAPH NUMBER AND TITLE:
11-1-1. DUTY RESPONSIBILITY11-1-2. DUTIES AND RESPONSIBILITIES
11-1-3. TIME BASED FLOW MANAGEMENT (TBFM)
2. BACKGROUND: Traffic Management Advisor (TMA) was known as a comprehensive, automated
method of planning efficient arrival trajectories from cruise altitude to the runway threshold. It increasedsituational awareness through its graphical displays, timelines, and load graphs. TMA trajectories have beenoptimized for each aircraft to permit an accurate estimated time of arrival at an airport and provide scheduled
times of arrival (meter times) that optimize the flow of traffic into a terminal area. The next generation of TMA
has begun. In this generation, all references to TMA have been changed, now referencing its new name:Time-Based Flow Management (TBFM).
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−483. CHANGE:
OLD NEW
11−1−1. DUTY RESPONSIBILITY 11 −1−1. DUTY RESPONSIBILITY
Title through a No Change
Add b. TBFM must be used to the maximum extent
feasible in prefer ence to miles-in-trail initiatives.
Add NOTE−
The benefits of TBFM are best realized through the
coordinated effort of all facilities supporting
Performance Based Navigation procedures or Traffic
Management Initiatives (TMIs).
b. It is recognized that the ATCS is integral in the
execution of the traffic management mission.c. It is recognized that the ATCS is integral in the
execution of the traffic management mission.
NOTE−
Complete details of traffic management initiatives and
programs can be found in F AAO JO 7210.3, Facility
Operation and Administration.No Change
OLD NEW
11−1−2. DUTIES AND RESPONSIBILITIES 11 −1−2. DUTIES AND RESPONSIBILITIES
Title through a No Change
1. Ensure that an operational briefing is
conducted at least once during the day and evening
shifts. Participants must include, at a minimum, the
STMCIC, Operations Supervisors (OS), Traffic
Management Coordinator(s) (TMC), and other
interested personnel as designated by facility
management. Discussions at the meeting should
include meteorological conditions (present andforecasted), staffing, equipment status, runways in
use, AAR and traffic management initiatives
(present and anticipated).1. Ensure an operational briefing is conducted at
least once during the day and evening shifts.
Participants must include, at a minimum, theSTMCIC, Front Line Manager-in-Charge
(FLMIC)/Controller-in-Charge (CIC) and other
interested personnel as designated by facility
management. Discussions at the meeting should
include meteorological conditions (present andforecasted), staffing, equipment status, runways in
use, Airport Arrival Rate
(AAR) /Metering
Parameters and T raffic Management Initiatives
(TMIs) (present and anticipated).
a2 No Change
3. Ensure that traf fic management initiatives are
carried out by Supervisory Traffic Management
Coordinator −in−Charge (STMCIC).3. Ensure that TMIs are carried out by
personnel providing traffic management
services.
a4 and a5 No Change
6. Ensure changes to restrictions based on the
Restrictions Inventory and Evaluation are
implemented in a timely manner.6. Ensure changes to restrictions /metering are
implemented in a timely manner.
b. FLM must: b. FLM /CIC must:
b1 No Change
2. Coordinate with the TMU and ATCSs to
develop appropriate traffic management initiatives
for sectors and airports in their area of
responsibility.2. Coordinate with the TMU and personnel
providing air traffic services to develop
appropriate TMIs for sectors and airports in their
area of responsibility.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−493. Continuously review traffic management
initiatives affecting their area of responsibility and
coordinate with TMU for extensions, revisions, orcancellations.3. Continuously review TMIs
affecting their
area of responsibility and coordinate with TMU for
extensions, revisions, or cancellations.
4. Ensure that traffic management initiatives are
carried out by ATCSs .4. Ensure that TMIs are carried out by personnel
providing air traffic services .
b5 and b6 No Change
7. Ensure changes to restrictions based on the
Restrictions Inventory and Evaluation are
implemented in a timely manner.7. Ensure changes to TMIs are implemented in
a timely manner.
c. ATCSs must: c. Personnel providing air traffic services must:
1. Ensure that traf fic management initiatives and
programs are enforced within their area of
responsibility. Traffic management initiatives and
programs do not have priority over maintaining:1. Ensure that TMIs are enforced within their
area of responsibility. TMIs do not have priority
over maintaining:
c1(a) and c1(b) No Change
2. Keep the OS and TMU apprised of situations
or circumstances that may cause congestion or
delays.2. Keep the FLM/CIC and TMU apprised of
situations or circumstances that may cause
congestion or delays.
3. Continuously review traffic management
initiatives affecting their area of responsibility and
coordinate with OS and TMU for extensions,
revisions, or cancellations.3. Continuously review TMIs affecting their
area of responsibility and coordinate with
FLM/CIC and TMU for extensions, revisions, or
cancellations.
c4 through d No Change
1. Support TMA operations and monitor TMA
equipment to improve situational awareness for a
system approach to traffic management initiatives .1. Support TBFM operations and monitor
TBFM equipment to improve situational
awareness for a system approach to TMIs.
d2 through e No Change
1. Support TMA operations and monitor TMA
equipment to improve situational awareness for a
system approach to traffic management initiatives .1. Support TBFM operations and monitor
TBFM equipment to improve situational
awareness for a system approach to TMIs .
e2 through f No Change
1. Monitor TMA equipment to improve
situational awareness for a system approach to
traffic management initiatives .1. Monitor TBFM equipment to improve
situational awareness for a system approach to
TMIs.
OLD NEW
11−1−3. TIME BASED FLOW
MANAGEMENT (TBFM)11−1−3. TIME BASED FLOW
MANAGEMENT (TBFM)
During periods of metering, ATCS must: During periods of metering, personnel providing
air traffic services must:
a. Display TMA schedule information on the main
display monitor (MDM).a. Display TBFM schedule information on the
main display monitor (MDM).
b. Comply with TMA -generated metering times
within +/- 1 minute.b. Comply with TBFM -generated metering times
within +/- 1 minute.
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−501. If TMA -generated metering time accuracy
within +/- 1 minute cannot be used for specific
aircraft due to significant jumps in the delaycountdown timer (DCT), other traffic management
initiatives may be used between those aircraft such
as miles-in-trail (MIT) or minutes-in-trail (MINIT)
to assist in delay absorption until stability resumes.1. If TBFM -generated metering time accuracy
within +/- 1 minute cannot be used for specific
aircraft due to significant jumps in the delaycountdown timer (DCT), other TMIs
may be used
between those aircraft such as miles-in-trail (MIT)
or minutes-in-trail (MINIT) to assist in delay
absorption until stability resumes.
b2 No Change
c. When compliance is not possible, coordinate
with FLM and adjacent facilities/sectors as
appropriate.c. When compliance is not possible, coordinate
with FLM /CIC, personnel providing traffic
management services, and adjacent
facilities/sectors as appropriate.
NOTE−
TMA accuracy of generated metering times is pr edicated
on several factors, including vectoring outside of TMA
route conformance boundaries (route recovery logic),
certain trajectory ground speed calculations, and whenTMU resequences a specific flight or flight list. Caution
should be used in these situations to minimize impact on
surrounding sector traffic and complexity levels, flightefficiencies, and user preferences.NOTE−
TBFM
accuracy of generated metering times is
predicated on several factors, including vectoring
outside of TBFM route conformance boundaries (route
recovery logic), certain trajectory ground speedcalculations, and when TMU resequences a specific
flight or flight list. Caution should be used in these
situations to minimize impact on surrounding sectortraffic and complexity levels, flight efficiencies, and user
preferences.
1. PARAGRAPH NUMBER AND TITLE: 13-1-9. ACKNOWLEDGEMENT OF AUTOMATED
NOTIFICATION
2. BACKGROUND: In the Host Computer System, computer applied preferential routes (PARs, PDRs,
PDARs) were developed to provide Air Traffic Control (ATC) directed preferred and/or mandated routes. Theneed for a controller to provide a modified clearance to an aircraft was provided by a “red route” or later a“highlighted route” on a flight strip. Only a single sector received this indication and it was expected thecontroller would issue the clearance or provide some alternative. En Route Decision Support Tool (EDST
previously URET) introduced the concept of blue Embedded Route Text (ERT previously HERT) coding as a
replacement for the red/highlighted indication on flight strips, and is integrated in En Route AutomationModernization (ERAM). Embedded Route Text (ERT) coding differs from previous method in that the ERTcoding will show at every sector in the facility until the coding is acknowledged. However depending on facility
settings, flight plans sent to other facilities could show the route mer ged; i.e., assumes that the ERT route has been
issued. To function properly with the ERAM design, the acknowledgement of the ERT coding needs to be done in
a timely manner. This is especially true to support terminal ARTS/STARS and FDIO processing.
3. CHANGE:
OLD
NEW
13-1-9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION13-1-9. ACKNOWLEDGEMENT OF
AUTOMATED NOTIFICATION
Title through e No Change
5/26/16 JO 7110.65W CHG 1
Briefing Guide BG−51f. Send/acknowledge Host Embedded Route Text
(HERT) coding only after the appropriate clearance
has been issued to the pilot or otherwise
coordinated. Do not send/acknowledge HERT
unless the sector has track control for the flight or
it has been otherwise coordinated.f. The first sector which displays Embedded
Route Text (ERT) coding must issue and
send/acknowledge the route prior to initiating a
hand-off unless verbally coordinated or as
specified in appropriate facility directives. Do
not send/acknowledge ERT coding unless the
sector has track control for the flight or it has been
otherwise coordinated.
g. Remove ATC Preferred Route (APR) coding
only after the route has been checked and any
required action has been completed. Do not remove
APR coding unless the sector has track control or it
has been otherwise coordinated.g. Route Action Notifications (RAN) such as
ATC preferred routes or route processing errors
must be amended at the first control position
that displays the RAN unless verbally
coordinated or as specified in appropriate
facility directives. Do not remove RAN coding
unless the sector has track control or it has been
otherwise coordinated.
NOTE−
If coding is prematurely removed and the control of the
aircraft is transferred before completing the appropriate
action, the next sector may not r eceive the necessary APR
notification.Delete
1. PARAGRAPH NUMBER AND TITLE:
Appendix A - Aircraft Information Fixed-Wing Aircraft
Appendix B - Aircraft Information Helicopters/Rotorcrafts
Appendix C - Aircraft Information Specific Amateur −Built/Experimental Aircraft
2. BACKGROUND: The International Civil Aviation Organization (ICAO) formulates aircraft type
designators for the world’s aircraft that will most likely receive air traffic services. ICAO provides this
information through ICAO Document 8643, Aircraft Type Designators, which is updated at least annually. FAA
supplements the ICAO information and publishes it through two documents: FAA Order JO 7340.2,Contractions, and FAA Order JO 7110.65, Air Traffic Control. These FAA documents didn’t contain all theaircraft listed by ICAO and the FAA documents contained dissimilar information.
3. CHANGE:
OLD
NEW
Appendix A - Aircraft Information
Fixed-Wing AircraftDelete Entire Appendix
OLD NEW
Appendix B - Aircraft Information
Helicopters/ RotorcraftsDelete Entire Appendix
OLD NEW
Appendix C - Aircraft Information Specific
Amateur −Built/Experimental AircraftDelete Entire Appendix
OLD NEW
Appendix D − Standard Operating Practice
(SOP) for the Transfer of Position
ResponsibilityAppendix A − Standard Operating Practice
(SOP) for the Transfer of Position
Responsibility
Fly GACA is an independent educational platform. It is not affiliated with, endorsed by, or operated by the General Authority of Civil Aviation (GACA) or the Government of the Kingdom of Saudi Arabia. The official and authoritative source for all civil aviation regulations, publications, and aeronautical information is always GACA. Always verify against the latest official GACA publication at gaca.gov.sa.